Separation Of Products Research Articles

Fe3O4@SiO2@[Aminoglycol][Formate] as a new superparamagnetic nanocatalyst and [Aminoglycol][Formate] as a novel ionic liquid catalyst for preparation of new dimethyldihydropyrimido[4,5-b]quinolone derivatives.

Efficient synthesis of novel dimethyldihydropyrimido[4,5-b]quinolones via three-component condensation of barbituric acid, arylaldehydes, and 3,4-dimethylaniline catalyzed by Fe3O4@SiO2@[Aminoglycol][Formate] as a new superparamagnetic nanocatalyst and [Aminoglycol][Formate] as a novel ionic liquid catalyst was described. The new heterogeneous nanocatalyst was characterized by FE-SEM, XRD, FT-IR, TGA-DTG, and VSM techniques. The new ionic liquid was characterized by 13CNMR, 1HNMR, and FT-IR techniques. The present work has advantages, such as excellent yields, short reaction times, environmentally friendly protocol, easy separation, and purification of products. The catalysts kept its catalytic properties after even five recoverability and reusability.

Green Synthesis of New Spiropyrrole Derivatives by Employing Activated Carbonyl Compounds and Graphen Oxide Decorated on Ag@CuO/ZnO NPs or CuO/ZnO NPs: Theoretical and Biological Study

ABSTRACTThis study focused on investigating the synthesis of new spiropyrrole derivatives with high yields. The two nanocatalyst CuO/ZnO@Graphen Oxide nanocomposites (CuO/ZnO@GO NCs) and Ag/CuO/ZnO@Graphen Oxide (Ag@CuO/ZnO@GO NCs) were employed in a multicomponent reaction at room temperature to synthesize new compounds. The reaction involved isatins, N‐alkyl isatins, and ninhydrin as activated carbonyl compounds, ammonium acetate, ethyl 2‐arylamino‐4‐dioxo‐4‐arylbutanoates, hydrazonoyl chloride, or ethylbromopyruvate in water. Also, the catalytic activity of the green synthesized CuO/ZnO@GO and Ag@CuO/ZnO@GO was evaluated in the reduction of organic pollutants such as 4‐nitrophenol (4‐NP) in water at mild conditions. The results indicated that the biosynthesized MNCs have very high and effective catalytic activity for organic pollutants within a few seconds. The newly synthesized spiro compounds demonstrate antioxidant activity as a result of two assessment processes conducted by its NH group. In addition, the antibacterial activity of newly created spiro compounds was assessed using a disk distribution method, involving two types of Gram‐negative bacteria. These compounds were found to limit the growth of Gram‐positive bacteria as well. Also, to better understand the reaction mechanism, density functional theory (DFT)–based quantum chemical methods have been applied. The advantages of this technology encompass rapid response times, high product yields, and uncomplicated catalyst and product separation via simple procedures.

A Heterogeneous Phosphomolybdate Nanocatalyst Utilizes Vitamin B1 to Promote Solvent‐Free H2O2 Sulfoxidation Selectivity

ABSTRACTCatalyst design and fabrication with safe and affordable components and methods is a high‐value‐added business. In this work, a vitamin‐based hybrid nanomaterial (PMoB1) is prepared by simple stirring of thiamine hydrochloride (vitamin B1, VB1) as an inexpensive commercially available biologically active compound with phosphomolybdic acid (PMo12) in acidic aqueous solution to catalyze selective oxidation of sulfides using aqueous H2O2. A small amount of this heterogeneous catalyst drives rapidly the sulfoxidation reaction under mild and solvent‐free conditions facilitating the product separation and reducing significantly the environmental impacts. The main factors of the catalytic reaction were optimized by the central composite design (CCD) method. The solid catalyst tolerates a wide range of pH and retained its structural integrity even at alkaline solution (pH = 11). PMoB1 composed of two VB1 and one PMo12 was found to be partially reduced based on 13P NMR and UV–Vis spectra. An amorphous structure with aggregated nanoparticles with sizes ranging between 50 and 70 nm and a specific surface area of 35 m2/g are important reasons for enhanced catalytic activity and selectivity. Nevertheless, non‐covalent interactions such as hydrogen bonding and the π–π stacking can also significantly affect the catalyst performance. Given the scavenging tests and spectral evidences, a non‐radical mechanism involving peroxo species is postulated. The catalysis is shown to be truly heterogeneous while the solid catalyst largely maintains its structural integrity during the recycling test.

ASSESSMENT OF THE PROBABILITY OF OCCURRENCE OF EMERGENCY SITUATIONS DURING OPERATION OF THE PYROLYSIS PLANT

The article discusses the issues of reliability and safety of operation of a pyrolysis plant for the disposal of used tires, which, in the context of an increasing volume of waste and the need for their effective disposal, is an urgent topic. The problem statement is related to the identification of factors affecting the reliability of the installation and the development of methods to prevent emergencies.The purpose of the study is to analyz the reliability of the pyrolysis plant and develop recommendations for its improvement. To achieve this goal, the causes and probabilities of failures of system elements are investigated, an analysis using the failure tree method is carried out. This method made it possible to identify the weaknesses of the system and assess the probability of their failures, which is critical to prevent emergencies.An assessment of the reliability of the installation showed that the greatest contribution to the probability of accidents is made by a malfunction of the gas separation system. This element is the most vulnerable due to its complexity and importance in the pyrolysis process, as it is responsible for the safe and effective separation of pyrolysis products. Any malfunction of the gas separation system can lead to the accumulation of dangerous gases, increasing the risk of explosions and fires. The identified emergencies require special attention to the development of effective measures to minimize them.The article proposes methods to improve the reliability of the system, the main of which is the redundancy of the most vulnerable elements. This will significantly reduce the probability of failures and increase the overall reliability of the installation. In addition, it is recommended to carry out regular inspections and maintenance of all elements of the system. These measures will help to identify and eliminate potential malfunctions in a timely manner, which will significantly reduce the likelihood of failures that can lead to emergencies.Thus, ensuring the reliability and safety of a pyrolysis plant for the disposal of used tires requires an integrated approach. Enabling redundancy of vulnerable elements and regular maintenance will minimize the likelihood of failures that can lead to emergencies and guarantee stable and safe operation of the system. These measures will not only increase the efficiency of disposal, but also ensure reliable and long-term operation of the installation.This article focuses on the importance of identifying vulnerable elements of the system and conducting regular maintenance to improve the reliability and safety of operation of the pyrolysis plant.

Extraction and Counter-Current Separation of Phenylpropanoid Glycosides from Pedicularis oederi Vahl by Deep Eutectic Solvent

Deep eutectic solvents (DESs) are mixtures of organic compounds displaying excellent solvent properties while keeping an ecofriendly character. In this study, DESs have been applied to the extraction of phenylpropanoid glycosides from Pedicularis oederi Vahl, successively separated by means of counter-current chromatography. Firstly, the ultrasonic-assisted extraction conditions were optimized by response surface methodology, and the results showed phenylpropanoid glycosides could be well extracted under the optimized extraction conditions with deep eutectic solvents. Then, the sample was separated by counter-current chromatography using ethyl acetate/aqueous solution of choline chloride and glycerol (6:6, v/v) as the solvent system. In about 360 min, four phenylpropanoid glycosides, including 31.6 mg of echinacoside, 65.3 mg of Jionoside A1, 28.9 mg of Forsythoside B, 74.1 mg of verbascoside, and 21.2 mg of kaempferol-3-O-rutinoside were obtained from about 900 mg of the sample. It revealed deep eutectic solvents could be well employed as a green solvent for the extraction and counter-current separation of natural products.

Magnetic Molecularly Imprinted Polymer Combined with Solid-Phase Extraction for Purification of Schisandra chinensis Lignans

Molecularly imprinted polymers (MIPs) can specifically recognize template molecules in solution with imprinted cavities. Due to their capacity for scalable production, they can be used to isolate target products from natural products for industrial production in the fields of pharmaceuticals and food. In this study, magnetic single-template molecularly imprinted polymers (St-MIPs) instead of magnetic multi-template molecularly imprinted polymers (Mt-MIPs) were prepared by surface imprinting using Schizandrol A as a template molecule and deep eutectic solvent (DES) as a functional monomer, combined with solid-phase extraction (SPE) for the adsorption and separation of Schizandrol A, Schisantherin A, Schizandrin A, and Schizandrin B from Schisandra chinensis (Turcz.) Baill. (S. chinensis) fruits extracts. The synthesized MIPs were characterized by FT-IR, TEM, SEM, TG, XRD and VSM, and their adsorption properties were also evaluated. MIPs can specifically recognize the template molecules with high reusability. The purity of the total S. chinensis lignans after SPE was 74.05%, among which that of Schizandrol A, Schisantherin A, Schizandrin A, and Schizandrin B was 33.38%, 8.69%, 16.33% and 15.67%, respectively. Moreover, the one-step synthesis of carrier was easy to operate. And St-MIPs reduced the production cost compared with Mt-MIPs. This study provides a new idea for natural product separation by molecular imprinting technology (MIT).

Molecular complex inspired design of an efficient copper(II)-containing robust porous polymers for electrochemical water oxidation

Homogeneous copper-bipyridine complexes have been reported as effective catalysts for water oxidation, demonstrating significant potential as alternatives to precious metal-based complexes. However, these complexes face long-term stability and product separation challenges similar to many homogeneous catalysts. Meanwhile, recent studies have underscored the potential of metalated polymer networks, which integrate the structural advantages of polymers with the functional benefits of metal species, making them highly attractive for various applications. Herein, we integrated copper-bipyridine units into porous polymer networks to overcome the limitations of copper-bipyridine complexes. We prepared a series of copper-incorporated polymers (TpBpy-Cux) for electrochemical water oxidation. The electrochemical properties of these polymers were tuned by varying the copper content, with TpBpy-Cu3 presenting the best performance among the samples studied. TpBpy-Cu3 demonstrated a low Tafel slope of 69 mV/decade, achieved a high Faradaic efficiency (FE) of 94 %, and exhibited exceptional stability over 1000 cyclic scans. This study offers insights into the design and optimization of metal-incorporated porous polymer networks building on the foundational understanding of their molecular counterparts for advanced catalytic applications.

Production and radiochemical separation of Tb-161 as a feasible beta therapeutic radioisotope from reactor irradiated Gd target

Terbium-161 (161Tb) is a promising therapeutic radionuclide that has gained significant attention in the field of nuclear medicine in recent years. 161Tb has several favorable characteristics that make it a valuable candidate for targeted radionuclide therapy. The production of No-carrier-added 161Tb was carried out by the neutron activation of natural gadolinium target in the Egyptian Second Research Reactor (ETRR-2) at a thermal neutron flux position of 1.8 × 1014 n cm-2 s-1. The radioactivities of 161Tb as well as coproduced Gd radioimpurities were computed theoretically by the MCNPX2.7.0 code and verified by actual measurements, where accepted discrepancies were obtained. The purification of 161Tb from irradiated Gd target was developed by Chelex-100 resin. The elution performance was studied using different eluents, and 0.1 M HNO3 was found to be the best medium to obtain a high separation efficiency of more than 92% in a short time. The eluted 161Tb was of high chemical, radiochemical, and radionuclidic purities, indicating its potential for effective application in radiopharmaceutical preparation.

Characterization of a highly integrated, natural convection-driven, condensing methanol reactor

A highly integrated, natural convection-driven, condensing methanol reactor with the catalyst bed, heat integration section and liquid product separation in a single pressure vessel without moving parts is successfully tested. Space-time yields of up to 600kgMeOHmcat.−3h−1 are demonstrated, comparable to other CO2-to-methanol processes. The internal recycle by natural convection is successfully achieved as well as significant heat integration. A further reduction of heat losses to the environment is needed for autothermal operation. The dynamic characteristics of the process, with fast start-up times, a high turn-down ratio add to the potential to deal with intermittent feed supply. Overall the LOGIC 2.0 reactor concept is a promising process configuration for green methanol production.

Nanoscale engineering of semiconductor photocatalysts boosting charge separation for solar-driven H2 production: Recent advances and future perspective

Abstract Photocatalytic hydrogen (H₂) production is regarded as an efficient method for generating renewable energy. Despite recent advancements in photocatalytic water splitting, the solar-to-hydrogen conversion efficiency of photocatalysts remains well below the 10% target needed for commercial viability due to ongoing scientific challenges. This review comprehensively analyzes recent advancements in nanoscale engineering of photocatalytic materials, emphasizing techniques to enhance photogenerated charge separation for efficient solar hydrogen production. Here we highlight the nanoscale engineering strategies for effective charge separation including crystal engineering, junction engineering, doping-induced charge separation, tailoring optoelectronic properties, hierarchical architecture, defects engineering, various types of heterojunctions, and polarity-induced charge separation, and discuss their unique properties including ferroelectric on spatial charge separation along with the fundamental principles of light-induced charge separation/transfer mechanisms, and the techniques for investigation. This study, critically assesses strategies for effective photogenerated charge separation to enhance photocatalytic hydrogen production and offers guidance for future research to design efficient energy materials for solar energy conversion.

Supercritical mechano-exfoliation process

The intricate balance among cost, output, and quality has substantially hindered the practical application of graphene within the downstream industry chain. Here we present a scalable and green supercritical CO2-assisted mechano-exfoliation (SCME) process that omits the use of organic solvents and oxidants throughout the production lifecycle, including exfoliation, separation, and purification. The SCME process achieves graphene powder space-time yields exceeding 40 kg/(m³·day) at laboratory (0.06–0.2 kg) and pilot scales ( > 4 kg), with resultant free-standing films showing conductivities up to 5.26 × 10⁵ S/m. Further kinetic investigations propose general guidelines for grinding-assisted exfoliation: (1) the macroscopic optimizing ability of mechanotechnics for mass transfer frequency and stress distribution and (2) the microscopic multiplication ability of exfoliation medium for shear-delamination. The comprehensive techno-economic analysis also underscores the economic viability of the SCME process for large-scale production.

A Stable Layered Microporous MOF Assembled with Y-O Chains for Separation of MTO Products.

Benefiting from highly tunable pore environments, some metal-organic frameworks (MOFs) have recently shown promising prospects in the separation of methanol-to-olefin (MTO) products (mainly C3H6 and C2H4). However, the "trade-off" between gas storage capacity and selectivity always results in inefficient separation. In addition, poor stability of MOFs also limits practical separation applications. Herein, we have successfully assembled a layered Y-MOF (FJI-W9) with bent diisophthalate ligands (H4L), Y-O chains, and 2-fluorobenzoic acids. As expected, FJI-W9 not only exhibits good chemical stability but also shows significant potential for C3H6/C2H4 separation. For FJI-W9, the C3H6 uptake at 298 K and 10 kPa is 63 cm3/g, and the IAST selectivity of FJI-W9 for C3H6/C2H4 (V/V = 50/50) is calculated to be 20.5. To the best of our knowledge, both C3H6 uptake and selectivity of FJI-W9 surpass most porous materials. GCMC simulation indicates that the special supramolecular binding sites in FJI-W9 have much stronger interactions with C3H6 than C2H4 molecules. More importantly, practical breakthrough experiments demonstrate that FJI-W9 can effectively separate C3H6/C2H4 (50/50) mixtures, thus obtaining high-purity C2H4 and C3H6, respectively.

Study of Phase Separation and Reversibility in CO2-Responsive Superamphiphile Microemulsions.

Phase separation of microemulsions occupies a key position in many applications, such as oil recovery, nanomaterial synthesis, and chemical reactions. Achieving an intelligent response is crucial to microemulsion development and application. For this reason, in this study, CO2-responsive superamphiphilic molecules were developed as rapidly switchable oil-in-water microemulsions. These superhydrophilic molecules with linear structures were produced by electrostatic interaction of stearic acid and aminotrimethyltriazine COSM-1 in a 1:1 molar ratio. The introduction of n-butanol as a cosurfactant in the CO2-responsive microemulsion system resulted in the spontaneous formation of stable microemulsions. The effect of the addition of n-butanol on the carbon dioxide-responsive microemulsion system was investigated, and the optimum amount of n-butanol was determined by optimization. After exposure to CO2 for 30 s, the superhydrophilic molecules decomposed into inactive components at the interface, leading to a complete phase separation of the microemulsion into oil and water phases. The system was purged with N2 at 60 °C for 10 min to remove the CO2, and the phase separation system was transformed into a clear microemulsion, which was then evaluated for its properties. The rapid response and complete demulsification of these surface CNFS superamphiphiles to CO2 suggest that they have promising applications in product separation, microemulsion recovery, and enhanced crude oil recovery.

Thermodynamic and Technological Studies of the Electric Smelting of Satpaevsk Ilmenite Concentrates

This work presents the results of thermodynamic and technological studies of the reducing electric smelting of low-quality and difficult-to-recover Satpaevsk ilmenite concentrates in the presence of sodium carbonate (Na2CO3) as a flux. In the course of thermodynamic studies, according to literature data and using the HSC Chemistry 8 program, the state diagrams of the FeO-TiO2, FeO-Fe2O3-TiO2, Na2O-TiO2, Na2O-SiO2, Ti-C-O and Fe-C-O systems and the possibility of reactions in the temperature range of 500–1600 °C (without smelting of titanium, 1678 °C), taking into account phase transitions, were studied. The article also presents the results of technological studies of the above process. In general, the research results showed the possibility of using sodium carbonate (Na2CO3) as a flux in the charge of the electric smelting of low-quality Satpaevsk ilmenite concentrates. It has been established that the addition of 4.5–5% of Na2CO3 allows for reducing the temperature and the duration of electric smelting, the viscosity of the melt, and the complete separation of the smelting products (cast iron from slag).

Numerical simulation of condensation of supercritical water gasification products in a supersonic nozzle

The clean and efficient separation of supercritical water gasification products (SCWGP) has emerged as a significant challenge in supercritical water gasification technology. This paper proposes the use of a supersonic nozzle for the condensation and separation of H2 and CO2 from SCWGP, leveraging the high-pressure characteristics of these products. By establishing a flow model and a condensation model for the supersonic nozzle, the effects of inlet pressure and inlet temperature on the condensation process are analyzed. The analysis reveals that the latent heat released during condensation causes an abnormal distribution of pressure and temperature within the nozzle. When the inlet pressure of the nozzle is increased from 7.0 to 9.0 MPa, the liquid phase mass fraction at the outlet rises from 5.3 × 10−3 to 0.056. Similarly, when the inlet temperature is lowered from 300.0 to 290.0 K, the liquid phase mass fraction at the outlet also rises from 5.3 × 10−3 to 0.058. The increase in inlet pressure leads to the condensation location shifting toward the throat by ∼8.5 × 10−3 m⋅MPa−1, while the impact of inlet temperature is approximately −2.3 × 10−3 m⋅K−1. The nucleation rate in the nozzle is always concentrated in a small region.

Constructing boosted charge separation for efficient H2O2 production and pollutant degradation by highly defective ZnIn2S4/ carbon doped boron nitride

Solar-driven photocatalytic production of H2O2 as a promising environmentally-friendly approach has been applied as a chemical reagent and for enhancing photocatalytic remediation. However, this process is still limited by unsatisfactory efficiency and hard separation of photogenerated charge carriers. Herein, we design a dual pathway to improve hydrogen peroxide production by establishing a 2D/2D heterojunction between carbon-doped boron nitride (BCN) and defective zinc indium sulfide (ZIS). The introduction of multiple vacancies and dopants at the interface successfully promoted the interfacial charge transfer and peroxide generation. The Z-scheme heterojunction establishes a built-in electronic field, facilitating continuous electron accumulation and depletion, thereby inducing band bending. As a result, the optimized BCN/ZIS-30 composite (>420 nm wavelength) exhibits 925 μmol/g/h in pure water with no other additions and advances this production to 2006.1 μmol/g/h (2 times as defective ZIS and 12.1 times as BCN) under the existence of isopropanol and aeration. Mechanism investigation indicated that H2O2 is generated via a two-step electron reduction route and water oxidation reaction. The generated H2O2 successfully constructs a self-photo-Fenton system by forming hydroxyl radicals. Accompanied by strong oxygen activation ability, the photo-Fenton system also exhibits rapid degradation of antibiotics with 95 % elimination in 60 minutes. The practical applicability of this photocatalyst was demonstrated through real water remediation tests, exhibiting its effectiveness in removing antibiotics, COD, and total ammonia nitrogen, highlighting its potential for practical water treatment applications. This work provides a novel idea on constructing heterojunction materials for energy saving and water remediation.

Biological conversion of lignin-derived ferulic acid from wheat bran into vanillin

Lignin is a promising feedstock for producing vanillin, one of the most extensively used flavor enhancers. However, the biotransformation performance of lignin derivatives into vanillin is still unsatisfactory. In this study, an efficient conversion strategy of lignin into vanillin was established by employing engineered Saccharomyces cerevisiae as a whole-cell biocatalyst. Optimization of cell culture media and whole-cell bioconversion improved the production efficiency of vanillin. The vanillin titer reached 15.3 mM with a molar yield of 71 % in fed-batch fermentation mode, while incorporating in-situ product separation, demonstrated a remarkable 2.6-fold increase. The whole-cell bioconversion, coupled with in-situ separation, successfully converted real lignin hydrolysate into a record vanillin titer of 21.1 mM, equivalent to 1.8 mg of vanillin per gram of wheat bran biomass. The whole-cell bioconversion process integrated in-situ product separation, represents a sustainable approach for vanillin production and offers a promising pathway for lignin valorization.

One‐Pot Multicomponent Reactions for the Synthesis and Biological Study of Novel Dihydrocyclopenta[b]pyrrole Employing Ag/Fe3O4@MWCNTs

ABSTRACTThe primary objective of this study was to explore the synthesis of novel dihydrocyclopenta[b]pyrrole derivatives with a high degree of efficiency. The work utilized a nanocatalyst composed of Ag/Fe3O4@MWCNTs in a multicomponent reaction including vinilydene aldehydes, ethyl 2‐amino‐4‐dioxo‐4‐arylbutanoates, and alkyl bromides. The reaction was carried out in aqueous solution at ambient temperature, leading to the formation of novel chemicals. The produced compounds exhibit antioxidant activity as a result of the evaluation processes performed on their NH group. Furthermore, an evaluation was performed on the antibacterial effectiveness of newly produced pyridines using a disk diffusion technique, utilizing two different strains of Gram‐negative bacteria. Significantly, the substances that were evaluated shown inhibitory effects on the development of Gram‐positive bacteria as well. This method has several benefits, including quick response times, high product yields, and easy separation of catalyst and product through simple procedures.

Water/oil interfacial photocatalysis of amphiphilic CdS/Bi2WO6 S-scheme heterojunctions for efficient production and spontaneous separation of H2O2 and value-added organics

The photocatalytic co-production of H2O2 and value-added organics in a suitable water/oil biphasic system offers an intriguing strategy to address the challenges encountered in a single liquid-phase solution, including the efficient separation of H2O2 and organic products as well as the mitigation of undesirable secondary reactions. For this, exploring amphiphilic photocatalysts with high performance is highly required. Herein, an amphiphilic CdS/Bi2WO6 S-scheme heterojunction photocatalyst is designedly synthesized through a two-step solvothermal process, aiming to achieve efficient interfacial photocatalytic reactions at the water/oil interface for simultaneous generation and selective separation of H2O2 and organic products. The CdS/Bi2WO6 heterojunction photocatalyst exhibits enhanced light absorption in UV–visible region, increased electron-hole separation efficiency, and powerful charge carriers with high redox abilities. Moreover, the formation of S-scheme heterojunction improves the catalyst stability by preventing CdS from photocorrosion. As a result, the production rate of H2O2 reaches up to 216.76 mmol g−1 h−1, accompanied by the generation of organic products (benzaldehyde: 104.91 mmol g−1 h−1, benzoic acid: 49.88 mmol g−1 h−1, and benzyl benzoate: 38.01 mmol g−1 h−1), in a water/benzyl-alcohol biphasic system under simulated sunlight irradiation. The photocatalytic mechanism is elucidated based on the results of comprehensive experiments and characterizations. This study highlights a rational construction of amphiphilic photocatalysts and their application in organic/water interfacial photocatalytic reactions.

Flow-electrode capacitive separation of organic acid products and recovery of alkali cations after acidic CO2 electrolysis

Acidic CO2 electrolysis, enhanced by the introduction of alkali cations, presents a strategic approach for improving carbon efficiency compared to processes conducted in neutral and alkaline environments. However, a significant challenge arises from the dissolution of both organic acids and alkali cations in a strongly acidic feed stream, resulting in a considerable energy penalty for downstream separation. In this study, we investigate the feasibility of using flow-electrode capacitive deionization (FCDI) technology to separate organic acids and recover alkali cations from a strongly acidic feed stream (pH ~ 1). We show that organic acids, such as formic acid and acetic acid, are retained in molecular form in the separation chamber, achieving a rejection rate of over 90% under all conditions. Alkali cations, such as K+ and Cs+, migrate to the cathode chamber in ionic form, with their removal and recovery significantly influenced by their concentration and the pH of the feed stream, but responding differently to the types and concentrations of organic acids. The energy consumption for the removal and recovery of K+ is 4 to 8 times higher than for Cs+, and the charge efficiency is significantly influenced by the types of organic acid products and alkali cations. We conduct a series of electrochemical measurements and analyze the impedance spectroscopy, identifying that hindered mass transfer governed the electrode process. Our findings underscore the potential of FCDI as an advanced downstream separation technology for acidic electrocatalysis processes.