Separate Titrations Research Articles

Clinical utility of repeated positive airway pressure titrations in children with obstructive sleep apnea syndrome.

Positive airway pressure (PAP) is the second line of treatment for obstructive sleep apnea syndrome in children. It is common practice following initiation of PAP to perform repeat titration polysomnography to re-evaluate the patient's therapeutic pressure; however, data supporting this practice are lacking. We hypothesized that repeat PAP titration would result in significant setting changes in children with obstructive sleep apnea syndrome. We retrospectively analyzed demographic, polysomnographic, and PAP data of children with obstructive sleep apnea syndrome aged 0-18 years who were initiated on PAP and underwent 2 titration studies over a 2-year period. PAP mode and recommended pressure differences between the 2 titrations were compared. 64 children met inclusion criteria. The median (interquartile range) baseline obstructive apnea-hypopnea index and SpO2 nadir were 14.8 (8.7-32.7) events/h and 88.5% (85-92%), respectively. The mean differences in obstructive apnea-hypopnea index, SpO2 nadir, and % total sleep time with SpO2 < 90% between both titrations were negligible, including children with obesity, adenotonsillar hypertrophy, and trisomy 21. Additionally, there was no significant difference in mean PAP pressure between 2 separate titration studies for those on continuous PAP or bilevel PAP. Overall, repeat PAP titration in children with obstructive sleep apnea syndrome within the timeframe here described did not result in significant changes in PAP mode, continuous PAP pressure, or obstructive apnea-hypopnea index. Based on these data, repeat PAP titration within 2 years of an initial titration does not appear to be necessary. Yendur O, Feld L, Miranda-Schaeubinger M, etal. Clinical utility of repeated positive airway pressure titrations in children with obstructive sleep apnea syndrome. J Clin Sleep Med. 2022;18(4):1021-1026.

Substrate-Specific Respiration of Isolated Skeletal Muscle Mitochondria after 1 h of Moderate Cycling in Sedentary Adults.

Skeletal muscle mitochondria have dynamic shifts in oxidative metabolism to meet energy demands of aerobic exercise. Specific complexes oxidize lipid and nonlipid substrates. It is unclear if aerobic exercise stimulates intrinsic oxidative metabolism of mitochondria or varies between substrates. We studied mitochondrial metabolism in sedentary male and female adults (n = 11F/4M) who were free of major medical conditions with mean ± SD age of 28 ± 7 yr, peak aerobic capacity of 2.0 ± 0.4 L·min-1, and body mass index of 22.2 ± 2 kg·m-2. Biopsies were collected from the vastus lateralis muscle on separate study days at rest or 15 min after exercise (1 h cycling at 65% peak aerobic capacity). Isolated mitochondria were analyzed using high-resolution respirometry of separate titration protocols for lipid (palmitoylcarnitine, F-linked) and nonlipid substrates (glutamate-malate, N-linked; succinate S-linked). Titration protocols distinguished between oxidative phosphorylation and leak respiration and included the measurement of reactive oxygen species emission (H2O2). Western blotting determined the protein abundance of electron transfer flavoprotein (ETF) subunits, including inhibitory methylation site on ETF-β. Aerobic exercise induced modest increases in mitochondrial respiration because of increased coupled respiration across F-linked (+13%, P = 0.08), N(S)-linked (+14%, P = 0.09), and N-linked substrates (+17%, P = 0.08). Prior exercise did not change P:O ratio. Electron leak to H2O2 increased 6% increased after exercise (P = 0.06) for lipid substrates but not for nonlipid. The protein abundance of ETF-α or ETF-β subunit or inhibitory methylation on ETF-β was not different between rest and after exercise. In sedentary adults, the single bout of moderate-intensity cycling induced modest increases for intrinsic mitochondrial oxidative phosphorylation that was consistent across multiple substrates.

Monitoring of prenatal patients using a combined antibody titre for Rh and non‐Rh antibodies

This was a laboratory exercise designed to determine whether combined antibody titrations in the presence of multiple antibodies achieve a critical level earlier or at the same time as antibodies having individual antibody titrations. Management of haemolytic disease of the fetus and newborn involves monitoring maternal antibody concentration by antibody titration. Separate titrations are generally performed for each antibody. Thirty-one samples containing combinations of two different Rh and/or non-Rh antibodies were examined with separate titres for each antibody and one single combined titration. Of 31 samples, 19 (61.3%) showed an increased combined titre. Of 12 samples that showed no increase, 10 contained a separate titre of <1 for either one or both antibodies. Where both antibodies had a separate titre of ≥1, 15 of 17 (88.2%) showed an increased combined titre. In contrast to the separate titration method, no decrease in titre level was observed using the combined method. Where two antibodies are present, titrations performed by a combined method will produce titre levels equal to or higher than antibodies titred individually. Therefore, a combined titration can be expected to reach a critical titre level as early as, or earlier in gestation than, antibodies monitored by a single titration method. Further studies relating fetal outcomes to titration methodology would be valuable in determining the validity of this approach for prenatal management. Cost-effectiveness of this approach to prenatal screening should also be assessed.

A set-up for simultaneous measurement of second harmonic generation and streaming potential and some test applications

We present a measurement cell that allows simultaneous measurement of second harmonic generation (SHG) and streaming potential (SP) at mineral-water interfaces with flat specimen that are suitable for non-linear optical (NLO) studies. The set-up directly yields SHG data for the interface of interest and can also be used to obtain information concerning the influence of flow on NLO signals from that interface. The streaming potential is at present measured against a reference substrate (PTFE). The properties of this inert reference can be independently determined for the same conditions. With the new cell, for the first time the SHG signal and the SP for flat surfaces have been simultaneously measured on the same surface. This can in turn be used to unambiguously relate the two observations for identical solution composition. The SHG test of the cell with a fluorite sample confirmed previously observed differences in NLO signal under flow vs. no flow conditions in sum frequency generation (SFG) investigations. As a second test surface, an inert (“hydrophobic”) OTS covered sapphire-c electrolyte interface was studied to verify the zeta-potential measurements with the new cell. For this system we obtained combined zeta-potential/SHG data in the vicinity of the point of zero charge, which were found to be proportional to each other as expected. Furthermore, on the accessible time scales of the SHG measurements no effects of flow, flow velocity and stopped flow occurred on the interfacial water structure. This insensitivity to flow for the inert surface was corroborated by concomitant molecular dynamics simulations. Finally, the set-up was used for simultaneous measurements of the two properties as a function of pH in automated titrations with an oxidic surface. Different polarization combinations obtained in two separate titrations, yielded clearly different SHG data, while under identical conditions zeta-potentials were exactly reproduced. The polarization combination that is characteristic for dipoles perpendicular to the surface scaled with the zeta-potentials over the pH-range studied, while the other did not. The work provides an advanced approach for investigating liquid/surface interactions which play a major role in our environment. The set-up can be upgraded for SFG studies, which will allow more detailed studies on the chemistry and the water structure at a given interface, but also the combined study of specific adsorption including kinetics in combination with electrokinetics. Such investigations are crucial for the basic understanding of many environmental processes from aquatic to atmospheric systems.

Development of a fluorescent enzyme-linked DNA aptamer-magnetic bead sandwich assay and portable fluorometer for sensitive and rapid listeria detection.

A fluorescent DNA aptamer-magnetic bead sandwich assay was developed to detect listeriolysin O (LLO) protein from pathogenic Listeria bacteria using a peroxidase-linked system, Amplex Ultra Red (AUR; derivatized resazurin) substrate, and a custom-designed handheld fluorometer. The assay is highly sensitive with demonstrated limits of detection (LODs) in the range of 4 to 61 L. monocytogenes cells or the equivalent LLO produced by 4 to 61 cells on average in separate titration trials. Total assay processing and analysis time was approximately 30 mins. The assay has demonstrated the ability to detect 6 species of Listeria as desired by the USDA's Food Safety Inspection Service (FSIS). The portable system was designed to be used primarily with surface swab samples from fomites, but it can also be used to assess enrichment cultures. The minimal time to detect a positive enrichment culture in our hands from an initial 10 cell inoculum in 200 ml of broth has been 8 h post-incubation at 37 °C in shaker flask cultures. An optional automated magnetic bead assay processing and wash device capable of simultaneously processing 6 samples with low and consistent fluorescence background for higher volume central laboratories is also described.

Isolation of the copper redox steps in the standard selective catalytic reduction on Cu-SSZ-13.

Operando X-ray absorption experiments and density functional theory (DFT) calculations are reported that elucidate the role of copper redox chemistry in the selective catalytic reduction (SCR) of NO over Cu-exchanged SSZ-13. Catalysts prepared to contain only isolated, exchanged Cu(II) ions evidence both Cu(II) and Cu(I) ions under standard SCR conditions at 473 K. Reactant cutoff experiments show that NO and NH3 together are necessary for Cu(II) reduction to Cu(I). DFT calculations show that NO-assisted NH3 dissociation is both energetically favorable and accounts for the observed Cu(II) reduction. The calculations predict in situ generation of Brønsted sites proximal to Cu(I) upon reduction, which we quantify in separate titration experiments. Both NO and O2 are necessary for oxidation of Cu(I) to Cu(II), which DFT suggests to occur by a NO2 intermediate. Reaction of Cu-bound NO2 with proximal NH4(+) completes the catalytic cycle. N2 is produced in both reduction and oxidation half-cycles.

Isolation of the Copper Redox Steps in the Standard Selective Catalytic Reduction on Cu‐SSZ‐13

AbstractOperando X‐ray absorption experiments and density functional theory (DFT) calculations are reported that elucidate the role of copper redox chemistry in the selective catalytic reduction (SCR) of NO over Cu‐exchanged SSZ‐13. Catalysts prepared to contain only isolated, exchanged CuII ions evidence both CuII and CuI ions under standard SCR conditions at 473 K. Reactant cutoff experiments show that NO and NH3 together are necessary for CuII reduction to CuI. DFT calculations show that NO‐assisted NH3 dissociation is both energetically favorable and accounts for the observed CuII reduction. The calculations predict in situ generation of Brønsted sites proximal to CuI upon reduction, which we quantify in separate titration experiments. Both NO and O2 are necessary for oxidation of CuI to CuII, which DFT suggests to occur by a NO2 intermediate. Reaction of Cu‐bound NO2 with proximal NH4+ completes the catalytic cycle. N2 is produced in both reduction and oxidation half‐cycles.

Direct elicitation of template concentration from quantification cycle (Cq) distributions in digital PCR.

Digital PCR (dPCR) exploits limiting dilution of a template into an array of PCR reactions. From this array the number of reactions that contain at least one (as opposed to zero) initial template is determined, allowing inferring the original template concentration. Here we present a novel protocol to efficiently infer the concentration of a sample and its optimal dilution for dPCR from few targeted qPCR assays. By taking advantage of the real-time amplification feature of qPCR as opposed to relying on endpoint PCR assessment as in standard dPCR prior knowledge of template concentration is not necessary. This eliminates the need for serial dilutions in a separate titration and reduces the number of necessary reactions. We describe the theory underlying our approach and discuss experimental moments that contribute to uncertainty. We present data from a controlled experiment where the initial template concentration is known as proof of principle and apply our method on directly monitoring transcript level change during cell differentiation as well as gauging amplicon numbers in cDNA samples after pre-amplification.

Combining Opioid and Adrenergic Mechanisms for Chronic Pain

Chronic pain is a highly prevalent medical problem in the United States. Although opioids and serotonin-norepinephrine reuptake inhibitors (SNRIs) have demonstrated efficacy for relief of chronic pain, each has risks of adverse events in patients. Because of the risk of opioid abuse and addiction, combinations reducing opioid requirements are particularly valuable. Opioid and SNRI agents relieve pain by different pathways; concurrent use of each agent separately offers many potential benefits: complementary and possibly synergistic analgesic efficacy, separate titrations of opioid and SNRI effects, and the reduction of opioid requirements. However, few clinical studies have investigated the ideal ratios for combinations of opioids and SNRIs. A number of factors affect whether specific combinations have additive, synergistic, less than additive efficacy, or increase adverse events in patients, including general pharmacokinetic considerations, the potential for pharmacodynamic drug interactions, dose, and timing. Because there is little clinical evidence guiding combination therapy with separate opioid and SNRI agents, using single-molecule agents provides safe and effective therapy and should be the first option presented to patients. The use of empiric combinations of separate opioid and SNRI combinations needs to be considered in light of clinical cautions, including the lack of published evidence to guide dose conversion from any opioid to tramadol or to tapentadol, and vice versa; the need to avoid combinations with known drug interactions; and the need to titrate the dose when adding an SNRI to an opioid, and vice versa.

The Molecular Mechanism of Hsp100 Chaperone Inhibition by the Prion Curing Agent Guanidinium Chloride

The Hsp100 chaperones ClpB and Hsp104 utilize the energy from ATP hydrolysis to reactivate aggregated proteins in concert with the DnaK/Hsp70 chaperone system, thereby playing an important role in protein quality control. They belong to the family of AAA+ proteins (ATPases associated with various cellular activities), possess two nucleotide binding domains per monomer (NBD1 and NBD2), and oligomerize into hexameric ring complexes. Furthermore, Hsp104 is involved in yeast prion propagation and inheritance. It is well established that low concentrations of guanidinium chloride (GdmCl) inhibit the ATPase activity of Hsp104, leading to so called "prion curing," the loss of prion-related phenotypes. Here, we present mechanistic details about the Hsp100 chaperone inhibition by GdmCl using the Hsp104 homolog ClpB from Thermus thermophilus. Initially, we demonstrate that NBD1 of ClpB, which was previously considered inactive as a separately expressed construct, is a fully active ATPase on its own. Next, we show that only NBD1, but not NBD2, is affected by GdmCl. We present a crystal structure of ClpB NBD1 in complex with GdmCl and ADP, showing that the Gdm(+) ion binds specifically to the active site of NBD1. A conserved essential glutamate residue is involved in this interaction. Additionally, Gdm(+) interacts directly with the nucleotide, thereby increasing the nucleotide binding affinity of NBD1. We propose that both the interference with the essential glutamate and the modulation of nucleotide binding properties in NBD1 is responsible for the GdmCl-specific inhibition of Hsp100 chaperones.

An Interaction between the Walker A and D-loop Motifs Is Critical to ATP Hydrolysis and Cooperativity in Bacteriophage T4 Rad50

The ATP binding cassette (ABC) proteins make up a large superfamily with members coming from all kingdoms. The functional form of the ABC protein nucleotide binding domain (NBD) is dimeric with ATP binding sites shared between subunits. The NBD is defined by six motifs: the Walker A, Q-loop, Signature, Walker-B, D-loop, and H-loop. The D-loop contains a conserved aspartate whose function is not clear but has been proposed to be involved in cross-talk between ATP binding sites. Structures of various ABC proteins suggest an interaction between the D-loop aspartate and an asparagine residue located in Walker A loop of the opposing subunit. Here, we evaluate the functional role of the D-loop using a bacteriophage T4 ABC protein, Rad50 (gp46). Mutation of either the D-loop aspartate or the Walker A asparagine results in dramatic reductions in ATP affinity, hydrolysis rate, and cooperativity. The mutant proteins bind Mre11 (gp47) and DNA normally, but no longer support the ATP-dependent nuclease activities of Mre11. We propose that the D-loop aspartate functions to stabilize the Walker A asparagine in a position favorable for catalysis. We find that the asparagine is crucially important to the mechanism of ATP hydrolysis by increasing the affinity for ATP and positioning the γ-phosphate of ATP for catalysis. Additionally, we propose that the asparagine acts as a γ-phosphate sensor and, through its interaction with the conserved D-loop aspartate, transmits conformational changes across the dimer interface to the second ATP binding site.

High‐affinity binding of phosphatidylinositol 4‐phosphate by Legionella pneumophila DrrA

The DrrA protein of Legionella pneumophila is involved in mistargeting of endoplasmic reticulum-derived vesicles to Legionella-containing vacuoles through recruitment of the small GTPase Rab1. To this effect, DrrA binds specifically to phosphatidylinositol 4-phosphate (PtdIns(4)P) lipids on the cytosolic surface of the phagosomal membrane shortly after infection. In this study, we present the atomic structure of the PtdIns(4)P-binding domain of a protein (DrrA) from a human pathogen. A detailed kinetic investigation of its interaction with PtdIns(4)P reveals that DrrA binds to this phospholipid with, as yet unprecedented, high affinity, suggesting that DrrA can sense a very low abundance of the lipid.

Acid and Alkali Buffer Capacity of Typical Fluvor-Aquic Soil in Huang-Huai-Hai Plain

Soil acid and alkali buffer capacity, as a major indicator for evaluating its vulnerability and resistibility to acidification and alkalization, is an important factor affecting the sustainable agriculture, through knowledge on which soil acidification process can be predicted and modified. In this study, titration curve method was adopted to investigate the pH buffer capacity (pHBC) of fluvor-aquic soil, and separate titration curves were established by adding incremental amounts of either standardized hydrochloric acid (HCl) (0.12 mol L −1) or sodium hydroxide (NaOH) (0.10 mol L −1) to soil suspended in deionized water (soil:solution = 1:5). Soil pH was measured after 7 d resuspension and isothermal equilibrium (T = 25°C). Linear regressions were fitted to the linear portion of each titration curve and the slopes of these lines were derived as the soil pHBC. The results showed that significant correlations between the amounts of adding acid or alkali and each pH change were presented, and titration curve method was feasible for measurement of pHBC on typical fluvor-aquic soil in Huang-Huai-Hai Plain, and the coefficients of determination were higher than the similar researches on acid soil ( R 2 = 0.96). The slope-derived pHBC of acid and alkali were 158.71 and 25.02 mmol kg −1, respectively. According to the classification of soil buffer systems, the soil tested belongs to the calcium carbonate buffer system, carbonates contribute the most to pHBC, and the contribution of soil organic matter relatively less than it.

Conformational Properties of β-PrP

Prion propagation involves a conformational transition of the cellular form of prion protein (PrPC) to a disease-specific isomer (PrPSc), shifting from a predominantly alpha-helical conformation to one dominated by beta-sheet structure. This conformational transition is of critical importance in understanding the molecular basis for prion disease. Here, we elucidate the conformational properties of a disulfide-reduced fragment of human PrP spanning residues 91-231 under acidic conditions, using a combination of heteronuclear NMR, analytical ultracentrifugation, and circular dichroism. We find that this form of the protein, which similarly to PrPSc, is a potent inhibitor of the 26 S proteasome, assembles into soluble oligomers that have significant beta-sheet content. The monomeric precursor to these oligomers exhibits many of the characteristics of a molten globule intermediate with some helical character in regions that form helices I and III in the PrPC conformation, whereas helix II exhibits little evidence for adopting a helical conformation, suggesting that this region is a likely source of interaction within the initial phases of the transformation to a beta-rich conformation. This precursor state is almost as compact as the folded PrPC structure and, as it assembles, only residues 126-227 are immobilized within the oligomeric structure, leaving the remainder in a mobile, random-coil state.

Interactions of the N-terminal Domain of Ribosomal Protein L11 with Thiostrepton and rRNA

Ribosomal protein L11 has two domains: the C-terminal domain (L11-C76) binds rRNA, whereas the N-terminal domain (L11-NTD) may variously interact with elongation factor G, the antibiotic thiostrepton, and rRNA. To begin to quantitate these interactions, L11 from Bacillus stearothermophilus has been overexpressed and its properties compared with those of L11-C76 alone in a fluorescence assay for protein-rRNA binding. The assay relies on 2'-amino-butyryl-pyrene-uridine incorporated in a 58-nucleotide rRNA fragment, which gives approximately 15-fold enhancement when L11 or L11-C76 is bound. Although the pyrene tag weakens protein binding, unbiased protein-RNA association constants were obtained in competition experiments with untagged RNA. It was found that (i) intact B. stearothermophilus L11 binds rRNA with K approximately 1.2 x 10(9) m(-1) in buffers with 0.2 m KCl, about 100-fold tighter than Escherichia coli L11; (ii) the N-terminal domain makes a small, salt-dependent contribution to the overall L11-RNA binding affinity (approximately 8-fold enhancement at 0.2 m KCl), (iii) L11 stimulates thiostrepton binding by 2.3 +/- 0.6 x 10(3)-fold, predicting an overall thiostrepton affinity for the ribosome of approximately 10(9) m(-1), and (iv) the yeast homolog of L11 shows no stimulation of thiostrepton binding. The latter observation resolves the question of why eukaryotes are insensitive to the antibiotic. These measurements also show that it is plausible for thiostrepton to compete directly with EF-G.GDP for binding to the L11-RNA complex, and provide a quantitative basis for further studies of L11 function and thiostrepton mechanism.

Sequential determination of urea and HMTA in the process solution of sol-gel route of advanced nuclear fuel fabrication

Determinations of hexamethylene tetramine (HMTA) and urea in the process solutions are required to optimize their concentrations for obtaining high quality ceramic oxide microspheres, for monitoring the washing procedure and for their subsequent recovery, recycling or waste disposal. Determination of urea in the feed solution by conventional procedures is difficult as it contains HMTA. It is more so in the effluent as it contains hydrolytic products like formaldehyde, methylol derivatives of urea, ammonium nitrate and ammonium hydroxide used for washing the gel microspheres. This work describes a derivative potentiometric method using a microprocessor-based autotitrator. Peaks on the first derivative of the titration plot corresponded to constituents of different basicities. Urea was selectively hydrolyzed at room temperature by the catalytic action of urease enzyme leaving HMTA unaffected. Ammonium hydroxide and ammonium bicarbonate produced from urea and HMTA were sequentially titrated for the analysis of the feed solution to obtain the three corresponding peaks respectively. Two separate titrations were required for the analysis of the effluent solution, which contained free ammonia also. One aliquot was first titrated directly without adding urease (for free ammonia and HMTA) and another aliquot was titrated after treatment with urease. The end points due to the ammonia used for washing and that from urea hydrolysis merged resulting in the appearance of three peaks again. Using this sequential method the relative standard deviations were found to be 0.81% and 1.38% for urea and HMTA, respectively, in eight determinations when the aliquots contained 50 to 75 mg of urea and 75 to 125 mg of HMTA. Feed and effluent solutions of the process stream were analyzed.

Determination of the redox properties of human NADPH-cytochrome P450 reductase.

Midpoint reduction potentials for the flavin cofactors in human NADPH-cytochrome P450 oxidoreductase were determined by anaerobic redox titration of the diflavin (FAD and FMN) enzyme and by separate titrations of its isolated FAD/NADPH and FMN domains. Flavin reduction potentials are similar in the isolated domains (FAD domain E(1) [oxidized/semiquinone] = -286 +/- 6 mV, E(2) [semiquinone/reduced] = -371 +/- 7 mV; FMN domain E(1) = -43 +/- 7 mV, E(2) = -280 +/- 8 mV) and the soluble diflavin reductase (E(1) [FMN] = -66 +/- 8 mV, E(2) [FMN] = -269 +/- 10 mV; E(1) [FAD] = -283 +/- 5 mV, E(2) [FAD] = -382 +/- 8 mV). The lack of perturbation of the individual flavin potentials in the FAD and FMN domains indicates that the flavins are located in discrete environments and that these environments are not significantly disrupted by genetic dissection of the domains. Each flavin titrates through a blue semiquinone state, with the FMN semiquinone being most intense due to larger separation (approximately 200 mV) of its two couples. Both the FMN domain and the soluble reductase are purified in partially reduced, colored form from the Escherichia coli expression system, either as a green reductase or a gray-blue FMN domain. In both cases, large amounts of the higher potential FMN are in the semiquinone form. The redox properties of human cytochrome P450 reductase (CPR) are similar to those reported for rabbit CPR and the reductase domain of neuronal nitric oxide synthase. However, they differ markedly from those of yeast and bacterial CPRs, pointing to an important evolutionary difference in electronic regulation of these enzymes.

Potentiometric determination of maleic anhydride in the presence of cis-3,6-endomethylene-1,2,3,6-tetrahydrophthalic (endic) anhydride

A procedure is developed for the determination of maleic anhydride in the presence of endic anhydride by potentiometric titration in aqueous-organic solutions. It is found that separate titration of a hydrolyzed mixture of anhydrides is most efficient in the system acetonitrile-water (3 : 2).

Potentiometric titration of long chain tertiary amine oxides and tertiary amines using a poly(vinyl chloride) membrane electrode

Two separate potentiometric titrations are used to quantify mixtures of long chain tertiary amine oxide and tertiary amine as their cations. A direct titration of the mixture in water at pH 2 against a standard sodium lauryl sulfate solution, using a poly(vinyl chloride) membrane sensing electrode, determines the total surfactant content, reported as % m/m tertiary amine oxide. A simple extraction is used to separate the tertiary amine, which is subsequently titrated under the same conditions. This titration is quantitative for dimethylalkylamine oxides and their corresponding amines (where alkyl = C10–C16). Seven analyses are performed on an aqueous mixture and give the following results: tertiary amine oxide, 23.8 ± 0.1% m/m and tertiary amine, 1.0 ± 0.1% m/m, at a 95% confidence level. This method is capable of determining tertiary amine at 0.1% m/m in the presence of 25% m/m tertiary amine oxide with no interference. The same aqueous mixture is spiked with tertiary amine to test the quantitative recovery of the amine. The recovery is 3.1% m/m compared with an expected value of 3.2% m/m amine.

The effect of valence and Ionic-strength on the measurement of pH buffer capacity

Although the measurement of pH buffer capacity (pHBC) is used to determine lime requirement and acid addition rate in acidification studies, the experimental conditions under which pHBC is determined have not been studied. The effect of valence and ionic strength on the measurement of pHBC was investigated on a range of soils. The effect of the monovalent or divalent accompanying ion was examined by establishing separate titration curves for each of 100 soils by adding incremental amounts of either Ca(OH)2, NaOH, HCl or H2SO4 to soil suspended (1 : 5) in water. Linear regressions were fitted to the linear portion of each titration curve and the slopes of these lines were used as a measure of pHBC. For each soil, the pH buffer capacities were statistically compared. The pHBC determined with Ca(OH)2 was significantly (P = 0.05) greater than that determined with NaOH in 92 soils and, on average (all soils), was 2.2 times the pHBC in NaOH. The effect of ionic strength on pHBC was investigated in each of 20 soils by titrating with HCI in water and suspensions at nominal ionic strengths of 0.006, 0.03 and 0.3 m. In all soils there was a trend for increasing pHBC with increasing ionic strength (I) and, for I &lt; 0.03 m, there was a marked increase in pHBC with increasing I. The results are discussed in relation to the effect of valence and ionic strength on pH buffer capacity mechanisms, and the implications with respect to calculating acidification rates and lime requirements.