Sensitive Nucleic Acid Detection Research Articles

Multiarmed DNA jumper and metal-organic frameworks–functionalized paper-based bioplatform for small extracellular vesicle–derived miRNAs assay

Small extracellular vesicle–derived microRNAs (sEV-miRNAs) have emerged as promising noninvasive biomarkers for early cancer diagnosis. Herein, we developed a molecular probe based on three-dimensional (3D) multiarmed DNA tetrahedral jumpers (mDNA-Js)-assisted DNAzyme activated by Na+, combined with a disposable paper-based electrode modified with a Zr-MOF–rGO–Au NP nanocomplex (ZrGA) to fabricate a novel biosensor for sEV-miRNAs Assay. Zr-MOF tightly wrapped by rGO was prepared via a one-step method, and it effectively aids electron transfer and maximizes the effective reaction area. In addition, the mechanically rigid, and nanoscale-addressable mDNA-Js assembled from the bottom up ensure the distance and orientation between fixed biological probes as well as avoid probe entanglement, considerably improving the efficiency of molecular hybridization. The fabricated bioplatform achieved the sensitive detection of sEV-miR-21 with a detection limit of 34.6 aM and a dynamic range from100 aM to 0.2 µM. In clinical blood sample tests, the proposed bioplatform showed results highly consistent with those of qRT-PCRs and the signal increased proportionally with the NSCLC staging. The proposed biosensor with a portable wireless USB-type analyzer is promising for the fast, easy, low-cost, and highly sensitive detection of various nucleic acids and their mutation derivatives, making it ideal for POC biosensing.

OPERA-Cas12a: A streamlined one-pot system for specific and sensitive on-site detection of nucleic acids

Rapid, sensitive, and user-friendly methods are essential for the detection of nucleic acid. The combination of isothermal amplification with CRISPR/Cas12a not only demonstrates significant advantages but also holds promising prospects for widespread application. However, the requirement for separate nucleic acid preamplification and Cas12a cleavage complicates operational procedures and increases the risk of aerosol pollution. Developing an easily implementable and widely applicable one-pot system remains a challenge. In this study, we introduced a novel approach to balance the reaction kinetics between enzymatic recombinase amplification (ERA) and Cas12a enzyme activity to establish a highly sensitive one-pot ERA/Cas12a (OPERA-Cas12a) system. We systematically identified key factors affecting reactions and utilized a definitive screening design (DSD) optimization strategy to streamline the optimization process. Using porcine-specific gene as the detection target, we successfully established the OPERA-Cas12apork system for pork detection, which demonstrated high specificity and sensitivity. Extending this strategy to duck-specific gene, we developed the OPERA-Cas12aduck system with comparable performance. Both OPERA-Cas12a systems achieved a limit of detection (LOD) of 6 copies per reaction within 60 minutes. Moreover, the detection results can be conveniently read with an LED blue light illuminator, and images can be captured using a smartphone. This OPERA-Cas12a system offers a valuable reference for developing other CRISPR/Cas-base nucleic acids detection applications.

Immobilization-free and label-free electrochemical DNA biosensing based on target-stimulated release of redox reporter and its catalytic redox recycling

Herein, we demonstrate a simple, homogenous and label-free electrochemical biosensing system for sensitive nucleic acid detection based on target-responsive porous materials and nuclease-triggered target recycling amplification. The Fe(CN)63− reporter was firstly sealed into the pores of Fe3O4 nanoparticles by probe DNA. Target DNA recognition triggered the controllable release of Fe(CN)63− for the redox reaction with the electron mediator of methylene blue enriched in the dodecanethiol assembled electrode and thereby generating electrochemical signal. The exonuclease III (Exo III)-assisted target recycling and the catalytic redox recycling between Fe(CN)63− and methylene blue contributed for the enhanced signal response toward target recognition. The low detection limit toward target was obtained as 478 fM and 1.6 pM, respectively, by square wave voltammetry and cyclic voltammetry methods. It also possessed a well-discrimination ability toward mismatched strands and high tolerance to complex sample matrix. The coupling of bio-gated porous nanoparticles, nuclease-assisted target amplification and catalytic redox recycling afforded the sensing system with well-controllable signal responses, sensitive and selective DNA detection, and good stability, reusability and reproducibility. It thus opens a new avenue toward the development of simple but sensitive electrochemical biosensing platform.

Droplet digital PCR: An effective method for monitoring and prognostic evaluation of minimal residual disease in JMML.

Juvenile myelomonocytic leukaemia (JMML) is a rare myeloproliferative neoplasm requiring haematopoietic stem cell transplantation (HSCT) for potential cure. Relapse poses a significant obstacle to JMML HSCT treatment, as the lack of effective minimal residual disease (MRD)-monitoring methods leads to delayed interventions. This retrospective study utilized the droplet digital PCR (ddPCR) technique, a highly sensitive nucleic acid detection and quantification technique, to monitor MRD in 32 JMML patients. The results demonstrated that ddPCR detected relapse manifestations earlier than traditional methods and uncovered molecular insights into JMML MRD dynamics. The findings emphasized a critical 1- to 3-month window post-HSCT for detecting molecular relapse, with 66.7% (8/12) of relapses occurring within this period. Slow MRD clearance post-HSCT was observed, as 65% (13/20) of non-relapse patients took over 6 months to achieve ddPCR-MRD negativity. Furthermore, bone marrow ddPCR-MRD levels at 1-month post-HSCT proved to be prognostically significant. Relapsed patients exhibited significantly elevated ddPCR-MRD levels at this time point (p = 0.026), with a cut-off of 0.465% effectively stratifying overall survival (p = 0.007), event-free survival (p = 0.035) and cumulative incidence of relapse (p = 0.035). In conclusion, this study underscored ddPCR's superiority in JMML MRD monitoring post-HSCT. It provided valuable insights into JMML MRD dynamics, offering guidance for the effective management of JMML.

Rapid Nucleic Acid Detection of Listeria monocytogenes Based on RAA-CRISPR Cas12a System.

Listeria monocytogenes (L. monocytogenes) is a food-borne pathogenic bacteria that frequently contaminates animal-derived food and low-temperature preserved food. Listeriosis caused by its infection has a high mortality rate and poses a serious threat to human health. Therefore, it is crucial to establish a sensitive, rapid and easy-to-operate technique. In this study, a Recombinase Aided Amplification (RAA) assisted CRISPR/Cas12a (RAA-CRISPR/Cas12a) fluorescence platform was established for highly sensitive nucleic acid detection of L. monocytogenes. The established RAA-CRISPR/Cas12a showed high sensitivity and high specificity, with the sensitivity of 350 CFU/mL and 5.4 × 10-3 ng/μL for pure bacterial solution and genomic DNA, and good specificity for 5 strains of Listeria spp. and 14 strains of other common pathogenic bacteria. L. monocytogenes could be detected at an initial concentration of 2.3 CFU/25g within 2 h of enriching the beef in the food matrix, and this method could be applied to food samples that were easily contaminated with L. monocytogenes The results of RAA-CRISPR/Cas12a could be observed in 5 min, while the amplification was completed in 20-30 min. The speed and sensitivity of RAA-CRISPR/Cas12a were significantly higher than that of the national standard method. In conclusion, the RAA-CRISPR/Cas12a system established in this study has new application potential in the diagnosis of food-borne pathogens.

A universal nucleic acid detection platform combing CRISPR/Cas12a and strand displacement amplification with multiple signal readout

Rapid and sensitive detection of nucleic acids has become crucial in various fields. However, most current nucleic acid detection methods can only be used in specific scenarios, such as RT-qPCR, which relies on fluorometer for signal readout, limiting its application at home or in the field due to its high price. In this paper, a universal nucleic acid detection platform combing CRISPR/Cas12a and strand displacement amplification (CRISPR-SDA) with multiple signal readout was established to adapt to different application scenarios. Nucleocapsid protein gene of SARS-CoV-2 (N gene) and hepatitis B virus (HBV) DNA were selected as model targets. The proposed strategy achieved the sensitivity of 53.1 fM, 0.15 pM, and 1 pM for N gene in fluorescence mode, personal glucose meter (PGM) mode and lateral flow assay (LFA) mode, respectively. It possessed the ability to differentiate single-base mismatch and the presence of salmon sperm DNA with a mass up to 105-fold of the targets did not significantly interfere with the assay signal. The general and modular design idea made CRISPR-SDA as simple as building blocks to construct nucleic acid sensing methods to meet different requirements by simply changing the SDA template and selecting suitable signal report probes, which was expected to find a breadth of applications in nucleic acids detection.

Assumption-free analysis for amplification-based quantitative nucleic acid detection.

The accurate detection and quantification of biological species that are rarely present but potentially devastating is of paramount importance for the life sciences, biosecurity, food safety, and environmental monitoring. Consequently, there has been significant interest in the sensitive and accurate detection of nucleic acids, leveraging both chemical and biological methods. Among these, quantitative polymerase chain reaction (qPCR) is regarded as the gold standard due to its sensitivity and precision in identifying specific nucleic acid targets. Despite the widespread adoption of qPCR for nucleic acid detection, the analysis of qPCR data typically depends on the use of calibrated standard curves and a threshold method to interpret signal measurements. In this study, we use a stochastic simulation to show the limitations of the threshold method due to its assumptions on amplification kinetics. We propose a new approach for the absolute quantification of nucleic acids that overcomes these limitations by reconstructing the efficiency profile across amplification cycles and using cumulative amplification folds to build a standard curve, thus avoiding the constant efficiency assumption. Our method, validated through experiments with nucleic acid amplification in the presence of potent inhibitors, demonstrates improved accuracy in quantifying nucleic acids, avoiding the systematic errors of the threshold method. This innovation enhances the reliability of nucleic acid quantification, especially where traditional methods struggle with kinetic variability.

Low-Cost Arduino Reverse Transcriptase Loop-Mediated Isothermal Amplification (RT-LAMP) for Sensitive Nucleic Acid Detection.

This work presents a low-cost transcription loop-mediated isothermal amplification (RT-LAMP) instrument for nucleic acid detection, employing an Arduino Nano microcontroller. The cooling system includes customized printed circuit boards (PCBs) that serve as electrical resistors and incorporate fans. An aluminum block is designed to accommodate eight vials. The system also includes two PCB heaters-one for sample heating and the other for vial lid heating to prevent condensation. The color detection system comprises a TCS3200 color 8-sensor array coupled to one side of the aluminum heater body and a white 8-LED array coupled to the other side, controlled by two Multiplexer/Demultiplexer devices. LED light passes through the sample, reaching the color sensor and conveying color information crucial for detection. The top board is maintained at 110 ± 2 °C, while the bottom board is held at 65 ± 0.5 °C throughout the RT-LAMP assay. Validation tests successfully demonstrated the efficacy of the colorimetric RT-LAMP reactions using SARS-CoV-2 RNA amplification as a sample viability test, achieving 100% sensitivity and 97.3% specificity with 66 clinical samples. Our instrument offers a cost-effective (USD 100) solution with automated result interpretation and superior sensitivity compared to visual inspection. While the prototype was tested with SARS-CoV-2 RNA samples, its versatility extends to detecting other pathogens using alternative primers, showcasing its potential for broader applications in biosensing.

A Programmable DNAzyme for the Sensitive Detection of Nucleic Acids.

Nucleic acids in biofluids are emerging biomarkers for the molecular diagnostics of diseases, but their clinical use has been hindered by the lack of sensitive detection assays. Herein, we report the development of a sensitive nucleic acid detection assay named SPOT (sensitive loop-initiated DNAzyme biosensor for nucleic acid detection) by rationally designing a catalytic DNAzyme of endonuclease capability into a unified one-stranded allosteric biosensor. SPOT is activated once a nucleic acid target of a specific sequence binds to its allosteric module to enable continuous cleavage of molecular reporters. SPOT provides a highly robust platform for sensitive, convenient and cost-effective detection of low-abundance nucleic acids. For clinical validation, we demonstrated that SPOT could detect serum miRNAs for the diagnostics of breast cancer, gastric cancer and prostate cancer. Furthermore, SPOT exhibits potent detection performance over SARS-CoV-2 RNA from clinical swabs with high sensitivity and specificity. Finally, SPOT is compatible with point-of-care testing modalities such as lateral flow assays. Hence, we envision that SPOT may serve as a robust assay for the sensitive detection of a variety of nucleic acid targets enabling molecular diagnostics in clinics.

A Programmable DNAzyme for the Sensitive Detection of Nucleic Acids

AbstractNucleic acids in biofluids are emerging biomarkers for the molecular diagnostics of diseases, but their clinical use has been hindered by the lack of sensitive detection assays. Herein, we report the development of a sensitive nucleic acid detection assay named SPOT (sensitive loop‐initiated DNAzyme biosensor for nucleic acid detection) by rationally designing a catalytic DNAzyme of endonuclease capability into a unified one‐stranded allosteric biosensor. SPOT is activated once a nucleic acid target of a specific sequence binds to its allosteric module to enable continuous cleavage of molecular reporters. SPOT provides a highly robust platform for sensitive, convenient and cost‐effective detection of low‐abundance nucleic acids. For clinical validation, we demonstrated that SPOT could detect serum miRNAs for the diagnostics of breast cancer, gastric cancer and prostate cancer. Furthermore, SPOT exhibits potent detection performance over SARS‐CoV‐2 RNA from clinical swabs with high sensitivity and specificity. Finally, SPOT is compatible with point‐of‐care testing modalities such as lateral flow assays. Hence, we envision that SPOT may serve as a robust assay for the sensitive detection of a variety of nucleic acid targets enabling molecular diagnostics in clinics.

Ultraspecific One-Pot CRISPR-Based "Green-Yellow-Red" Multiplex Detection Strategy Integrated with Portable Cartridge for Point-of-Care Diagnosis.

Versatile, informative, sensitive, and specific nucleic acid detection plays a crucial role in point-of-care pathogen testing, genotyping, and disease monitoring. In this study, we present a novel one-pot Cas12b-based method coupled with the "Green-Yellow-Red" strategy for multiplex detection. By integrating RT-LAMP amplification and Cas12b cleavage in a single tube, the entire detection process can be completed within 1 h. Our proposed method exhibits high specificity, enabling the discrimination of single-base mutations with detection sensitivity approaching single molecule levels. Additionally, the fluorescent results can be directly observed by the naked eye or automatically analyzed using our custom-designed software Result Analyzer. To realize point-of-care detection, we developed a portable cartridge capable of both heating and fluorescence excitation. In a clinical evaluation involving 20 potentially SARS-CoV-2-infected samples, our method achieved a 100% positive detection rate when compared to standard RT-PCR. Furthermore, the identification of SARS-CoV-2 variants using our method yielded results that were consistent with the sequencing results. Notably, our proposed method demonstrates excellent transferability, allowing for the simultaneous detection of various pathogens and the identification of mutations as low as 0.5% amidst a high background interference. These findings highlight the tremendous potential of our developed method for molecular diagnostics.

Spatiotemporal dual-dimensional separation enables ultra-simple one-pot CRISPR-based molecular diagnostics

Recently, CRISPR/Cas-based technology has shown great promise for nucleic acid-based molecular diagnostics. However, most established strategies reported two-step operations to achieve high sensitivity but carry the risk of aerosol contamination. Herein, we developed a SpatioTemporal dual-dimensional sepAration-based CRISPR/Cas detection (STAR) system for simple and sensitive one-pot nucleic acid detection, taking advantage of the capillary forces of 3D-printed inner tube which dynamically connects the recombinase polymerase amplification (RPA, inner tube) and CRISPR/Cas12a derived detection (outer tube). With RPA reaction proceeding, the spontaneously defused amplicons will activate the CRISPR/Cas12a reaction, lighting up the inner tube with glamorous fluorescent signals. Benefiting from spatiotemporal dual-dimensional separation, the STAR system not only can address the carryover contamination and incompatibility between two reactions, but also does not require for additional operations once assembled. Our STAR system has exhibited high specificity and sensitivity for the detection of Salmonella typhimurium in both broth and spiked milk samples with detection limits of 100 CFU/mL. With the outstanding performance, the developed STAR system has shown great potential for the development of next-generation point-of-care molecular diagnostics.

Development of a highly sensitive TaqMan method based on multi-probe strategy: its application in ASFV detection.

The establishment of high sensitive detection method for various pathogenic microorganisms remains constantly concerned. In the present study, multi-probe strategy was first systematically investigated followed by establishing a highly sensitive TaqMan real-time fluorescent quantitative PCR (qPCR) method for detecting African swine fever virus (ASFV). Briefly, four probes based on the B646L gene of ASFV were designed and the effects of different combinations of the probes in a single TaqMan qPCR assay on the detection sensitivity were investigated. As less as 0.5-5 copies/μl of the ASFV gene was detected by the established TaqMan qPCR assay. Furthermore, plasmid harboring the B646L in water samples could be concentrated 1000 times by ultrafiltration to enable a highly sensitive detection of trace viral nucleic acids. Moreover, no cross-reactivity was observed with other common clinical swine viruses such as PCV2, PCV3, PCV4, PEDV, PDCoV, CSFV, PRRSV, and PRV. When detecting 173 clinical porcine serum samples, the coincidence rate between the developed method and WOAH (World Organization of Animal Health) recommended method was 100%. This study might provide an integrated strategy to achieve higher detection sensitivity of trace pathogenic microorganisms and applicably sensitive TaqMan-based qPCR assays.

Rapid and sensitive detection of nucleic acids using an RAA-CRISPR/Cas12b one-pot detection assay (Rcod)

Rapid, sensitive and specific methods are crucial for nucleic acid detection. CRISPR/Cas12b has recently been widely used in nucleic acid detection. However, due to its thermophagic property, DNA isothermal recombinase-aided amplification (RAA) and subsequent CRISPR/Cas12b detection require two separate reactions, which is cumbersome and inconvenient and may cause aerosol pollution. In this study, we propose an RAA-CRISPR/Cas12b one-pot detection assay (Rcod) for Bordetella pertussis detection without additional amplification product transfer steps. The time from sample processing to response time was less than 30 min using nucleic acid extraction-free method, and the sensitivity reached 0.2 copies/μL. In this system, Alicyclobacillus acidoterrestris Cas12b protein (AacCas12b) exhibited strong and specific trans-cleavage activity at a constant temperature of 37 °C, while the cis-cleavage activity was weak. This characteristic reduces the interference of AacCas12b with nucleic acids in the system. Compared with real-time PCR, our Rcod system detected B. pertussis in 221 clinical samples with a sensitivity and specificity of 97.96 % and 99.19 %, respectively, with nucleic acid extraction-free method. The rapid, sensitive and specific Rcod system provides ideas for the establishment of CRISPR-based one-step nucleic acid detection and may aid the development of reliable point-of-care nucleic acid tests. ImportancePertussis is an acute respiratory infection caused by B. pertussis that is highly contagious and potentially fatal, and early diagnosis is essential for the treatment of whooping cough. In this study, we found that AacCas12b has high and strongly specific trans-cleavage activity at lower temperatures. A RAA-CRISPR/Cas12b one-step detection platform (Rcod) without interference with amplification was developed. In addition, the combination of Rcod and nucleic acid extraction-free method can quickly and accurately detect the qualitative detection of B. pertussis, and the detection results are visualized, which makes the pathogen nucleic acid detection and analysis process simpler, and provides a new method for the rapid clinical diagnosis of B. pertussis.

CRISPR/Cas12a triggered SERS and naked eye dual-mode biosensor for ultrasensitive and on-site detection of nucleic acid via cascade signal amplification

Highly sensitive and on-site detection of nucleic acids has always been a critical issue in the field of analytical chemistry. Surface-enhanced Raman scattering (SERS)-based biosensing exhibits huge potential in nucleic acid detection, while the applicability is restricted in trace nucleic acid screening due to the lack of appropriate signal recognition, transducing and amplification technologies. Inspired by the specific recognition of CRISPR/Cas12a and the improved sensitivity through cascade signal amplification, we innovatively proposed a CRISPR/Cas12a triggered SERS and naked eye dual-mode biosensor for ultrasensitive and on-site detection of nucleic acid via cascade signal amplification. Upon the target DNA recognition, the activated CRISPR/Cas12a indiscriminately cleaved substrate ssDNA, leading to the failure of toehold-mediated DNA-strand displacement reaction (TSDR), and triggering hybridization chain reaction (HCR) to assemble numerous G-quadruplex/hemin DNAzyme (GQH DNAzyme) for cascade signal amplification. The generated GQH DNAzyme catalyzed the oxidation of l-cysteine to cystine, perturbing the aggregation of 4-NTP@AuNPs, resulting in significant Raman signal change. On the other hand, GQH DNAzyme catalyzed the oxidation of 2,2′-azino-di-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), leading to obvious color change to realize portable naked-eye detection. Through this strategy, target nucleic acid concentration was tactfully transformed into sensitive Raman and portable visualization signals, and the limit of detection were as low as 34.9 aM and 1 pM, respectively. Then, this biosensor was successfully applied to meat adulteration detection, which showed superb selectivity, sensitivity and applicability for on-site detection of trace nucleic acid in complicated food matrix.

SABER-FISH in Hydractinia.

In situ hybridization allows the detection of nucleic acid sequences in fixed cells and tissues. The gelatinous nature of cnidarians and Hydractinia demands extensive and exhausting protocols to detect RNA transcripts with traditional methods (e.g., colorimetric in situ hybridization). Signal amplification by exchange reaction (SABER) fluorescence in situ hybridization (FISH) enables simplifying and multiplex imaging of RNA targets in a rapid and cost-effective manner. In one enzymatic reaction, SABER-FISH uses a strand-displacing polymerase and catalytic DNA hairpin to generate FISH probes with adjustable signal amplification, allowing highly sensitive detection of nucleic acids and reducing the number of required probes. Here I describe the methodology to detect transcripts within the cells of Hydractinia by SABER-FISH in whole-mount samples.

Ligation-Based High-Performance Mimetic Enzyme Sensing Platform for Nucleic Acid Detection.

G-quadruplex (G4)/hemin DNAzyme is a promising candidate to substitute horseradish peroxidase in biosensing systems, especially for the detection of nucleic acids. However, the relatively suboptimal catalytic capacity limits its potential applications. This makes it imperative to develop an ideal signal for the construction of highly sensitive biosensing platforms. Herein, we integrated a novel chimeric peptide-DNAzyme (CPDzyme) with the ligase chain reaction (LCR) for the cost-efficient and highly sensitive detection of nucleic acids. By employing microRNA (miRNA) and single-nucleotide polymorphism detection as the model, we designed a G4-forming sequence on the LCR probe with a terminally labeled amino group. Subsequently, asymmetric hemin with carboxylic arms allowed assembly with the LCR products and peptide to form CPDzyme, followed by the magnetic separation of the extraneous components and chemiluminescence detection. Compared with the conventional G4/hemin signaling-based method, the LCR-CPDzyme system demonstrated 3 orders of magnitude improved sensitivity, with accurate quantification of as low as 25 aM miRNA and differentiation of 0.1% of mutant DNA from the pool containing a large amount of wild-type DNA. The proposed LCR-CPDzyme strategy is a potentially powerful method for in vitro diagnostics and serves as a reference for the development of other ligation- or hybridization-based nucleic acid amplification assays.

Toehold-Containing Three-Way Junction-Initiated Multiple Exponential Amplification and CRISPR/Cas14a Assistant Magnetic Separation Enhanced Visual Detection of Mycobacterium Tuberculosis.

Rapid and simple nucleic acid detection is significant for disease diagnosis and pathogen screening, especially under specific conditions. However, achieving highly sensitive and specific nucleic acid detection to meet the time and equipment demand remains technologically challenging. In this study, we proposed a magnetic separation enhanced colorimetry biosensor based on a toehold-containing three-way junction (TWJ) induced multiple isothermal exponential amplification and the CRISPR/Cas14a (C-TEC) biosensor. The TWJ template was designed as a Y-X-Y structure. In the presence of the target, the formation of toehold-containing TWJ complex induced primer extension, leading to the generation of amplified single-stranded DNA; this amplified DNA could then bind to either the free TWJ template for EXPAR reaction or the toehold of the TWJ complex for toehold-mediated strand displacement, thereby enabling the recycling of the target. The amplification products could trigger CRISPR/Cas14a for efficient trans-cleavage and release the magnetically bound gold nanoparticle probes for colorimetry detection. Using Mycobacterium tuberculosis 16S rDNA as the target, the proposed C-TEC could detect 16S rDNA down to 50 fM by the naked eye and 20.71 fM by UV-vis detector at 520 nm within 90 min under optimal conditions. We successfully applied this biosensor to clinical isolates of Mycobacterium tuberculosis. In addition, the C-TEC biosensor also showed feasibility for the detection of RNA viruses. In conclusion, the proposed C-TEC is a convenient, fast, and versatile platform for visual detection of pathogen DNA/RNA and has potential clinical applications.

Triple cycling integrating with primer exchange reaction (TCiPER) for ultra-sensitive and label-free detection of MicroRNA

Primer exchange reaction (PER), a novel and effective isothermal amplification method, is extensively employed in the development of microRNAs (miRNAs) detection methods. Nevertheless, the PER-based miRNA detection methods necessitate enhanced sensitivity and interference resistance. Here, we propose a fluorescence biosensor, referred to as Triple Cycling integrating with Primer Exchange Reaction (TCiPER), for miRNA detection with straightforward operation, reduced interferences, and significantly increased sensitivity. This method has a high sensitivity with a low limit of detection of 56 aM because the target miRNA recognizes the detection probe and initiates triple signal cycles. PER template (PT) is initially occupied by the hairpin probe (HP), which reduces the possibility of fault initiation of PER by the primer similar sequences, and ii) the produced G-quadruplex sequences combine with thioflavin T (ThT) to produce significant fluorescence, which is superior to traditional fluorescent methods that are developed on the basis of costly and carefully selected fluorescent probes. In conclusion, this strategy substantially enhanced the convenience of sensors fabricated using PER strategies and provided a new perspective for the future development of extensive and sensitive nucleic acid detection analysis tools.

Asymmetric CRISPR enabling cascade signal amplification for nucleic acid detection by competitive crRNA

Nucleic acid detection powered by CRISPR technology provides a rapid, sensitive, and deployable approach to molecular diagnostics. While exciting, there remain challenges limiting its practical applications, such as the need for pre-amplification and the lack of quantitative ability. Here, we develop an asymmetric CRISPR assay for cascade signal amplification detection of nucleic acids by leveraging the asymmetric trans-cleavage behavior of competitive crRNA. We discover that the competitive reaction between a full-sized crRNA and split crRNA for CRISPR-Cas12a can induce cascade signal amplification, significantly improving the target detection signal. In addition, we find that CRISPR-Cas12a can recognize fragmented RNA/DNA targets, enabling direct RNA detection by Cas12a. Based on these findings, we apply our asymmetric CRISPR assay to quantitatively detect microRNA without the need for pre-amplification, achieving a detection sensitivity of 856 aM. Moreover, using this method, we analyze and quantify miR-19a biomarker in plasma samples from bladder cancer patients. This asymmetric CRISPR assay has the potential to be widely applied for simple and sensitive nucleic acid detection in various diagnostic settings.