Sensitive Detection Research Articles

Nanopore single molecule ATP detection based on the dual effects of specific capturing and signal amplification

Adenosine triphosphate (ATP) plays a crucial role in energy metabolism. Some serious diseases such as Alzheimer’s disease are related to abnormal ATP concentrations. Fast, sensitive, and specific ATP detection is important and challenging in disease diagnosis and biomedical research. In present study, conical nanopore was designed and employed to detect ATP at single molecule level. For overcoming the inherent defects such as non-selectivity and low sensitivity of nanopore in sensing small target molecule, two collaborative improvements of specific identification and signal amplification were proposed. We first used split aptamer capture probes (H1 and S1) to anchor ATP molecule, and then used auxiliary probes (H2 and H3) to form a long-nicked duplex ATP-DNA concatemer by hybridization chain reaction (HCR). Referring ATP-DNA concatemer rather than native ATP to nanopore sensor, characteristic current signals with high signal-to-noise ratio were obtained. By such indirect way, specific and sensitive ATP detection was realized with a linear range from 20 pM to 5 nM and a detection limit of 3.9 pM (S/N = 3). Additionally, the sensor exhibited many merits such as simplify, anti-interference, and especially allowing ATP detection in real sample. So, we believe that the nanopore sensor has good application prospects in screening and management of ATP-related diseases.

Rapid, sensitive and highly specific diagnosis of Moraxella catarrhalis by recombinase polymerase amplification-based biosensor and fluorescence detection

Moraxella catarrhalis (M. catarrhalis) was an underestimated respiratory infection pathogen that has been largely overlooked. The limited availability of rapid and sensitive detection methodologies has hindered M. catarrhalis diagnostic in clinical settings and contributed to its underestimation. To address this issue, we devised two recombinase polymerase amplification (RPA)-based assays for rapid, sensitive and reliable detection of M. catarrhalis, termed M. catarrhalis-RPA-Flu and M. catarrhalis-RPA-LFB, which utilized fluorescence and nanoparticle-based lateral flow biosensor (LFB) for reporting the detection results, respectively. In both assays, the specific copB gene of M. catarrhalis was amplified at 37°C for only a period of 20 minutes. In M. catarrhalis-RPA-Flu system, the detection results were analyzed by either using a real-time fluorescent detector or by direct observation using the naked eye under blue light, while, in M. catarrhalis-RPA-LFB system, biosensors were used for interpreting the results without any specialized instruments. Both methods were able to finalize the entire detection process within a duration of 40 minutes, detect down to 35 fg genomic DNA per test, and correctly differentiate M. catarrhalis from non- M. catarrhalis strains. The feasibility of both techniques was validated by analyzing 96 BALF (Broncho alveolar lavage fluid) samples in clinical settings. Collectively, the newly developed two RPA-based assays exhibit great potential for rapid and accurate identification of M. catarrhalis in standard microbiology laboratories as well as diagnosis of M. catarrhalis infection in clinical settings.

Plasmon AgNPs/MoS2/ZnO nanorods array ternary heterojunctions enabling high-efficiency solar-light energy utilization for photocatalysis and recyclable SERS detection

BackgroundSurface-enhanced Raman scattering (SERS) has gained widespread use in molecule-level detection benefiting from its high sensitivity, nondestructive data acquisition, and capacity for providing molecular fingerprint information. However, the strong adhesion of target molecules to the substrate (known as the "memory effect") inherently hinders the reusability of SERS substrates. Research has shown that self-cleaning SERS substrates based on versatile semiconductor materials with SERS enhancement capabilities and solar photocatalytic properties offer an effective platform for the sensitive detection and degradation of harmful molecules. ResultsIn this research, a resuable SERS-active substrate was facilely fabricated by anchoring silver nanoparticles (AgNPs) to the edges of MoS2 nanosheet decorated on ZnO nanorod arrays (NRAs). This innovative design exhibited a remarkable SERS enhancement factor (EF) of 4.6 × 107 and demonstrated significant solar photocatalytic efficiency. Such superior characteristics of ternary plasma heterojunction were ascribable to the synergistic effect of the “Schottky barrier” and “hot spots” between MoS2 and AgNPs, the inherent chemical enhancement proficiency of the MoS2/ZnO NRAs heterojunction, as well as the ultrafast electron transfer within the ternary heterojunction. SignificanceThe developed ternary heterojunction substrate enabled highly sensitive SERS detection of trace amounts of organic molecules. Moreover, this SERS substrate exhibited self-cleaning and recyclability via solar-light-driven photocatalysis. This bifunctional recyclable SERS substrate proved capable of meeting various requirements for routine monitoring of environmental organic pollutants and provided a robust avenue for advancing energy utilization materials that serve as high-performance SERS sensors and catalysts.

A facile and efficient voltammetric sensor for marbofloxacin detection based on zirconium-based metal-organic framework UiO-66/nitrogen-doped graphene nanocomposite

Improper and persistent use of marbofloxacin (MAR) is prone to produce residues that deteriorate the surrounding environment and endanger our health. Hence, it is urgent to stablish a facile and efficient detection technique for the detection of MAR. Herein, a highly efficient electrochemical platform was constructed for sensitive determination of MAR using zirconium-based metal–organic framework (UiO-66)/nitrogen-doped graphene (NG) nanocomposites (UiO-66/NG). The surface morphology, crystalline phase elemental composition, and electrochemical behavior of UiO-66/NG were characterized by various spectroscopic and electrochemical techniques. Owing to the synergistic interaction of UiO-66 MOFs and NG nanosheets, the UiO-66/NG exhibited remarkable catalytic activity for MAR oxidation. As consequently, the UiO-66/NG demonstrated a wide linear response range (0.01 − 10 μM), high sensitivity (1.80 μM μA−1 cm−2) and low detection limit (0.002 μM). The proposed UiO-66/NG/GCE demonstrated robust voltammetric responses even in the presence of excess potential interfering species and retained stable response signals for at least two weeks. More importantly, the proposed UiO-66/NG/GCE displayed highly consistent sensitivity toward MAR detection in both aquaculture water matrices and PBS buffer, and achieved accurate and sensitive detection of MAR with good recovery. Together with its low cost and facile operation, the UiO-66/NG/GCE shows great prospects for trace detection of MAR from complex matrices.

Iron ion detection and life cycle assessment of cutting fluid based on photoluminescent nitrogen-doped carbon quantum dots

Cutting fluid (CF) ensures machining accuracy and improves tool life in machining, which is of great significance for its impurity content detection and life cycle evaluation. In this paper, citric acid and arginine were used as carbon and nitrogen sources, photoluminescent (PL) nitrogen-doped carbon quantum dots (N-CDs) with a particle size ranging from 8 to 14 nm and well dispersion in water-based CF were synthesized by a one-pot hydrothermal reaction method. The N-CDs have the best signal under 360 nm ultraviolet light excitation, which well avoids the autofluorescence of the CF. The N-CDs dispersion have good selectivity and linearity in the Fe3+ concentration range of 2 to 80 μM, and the detection limit is 1.2 μM. The N-CDs were used to detect the concentration of Fe3+ in CF with different working hours, and the results were consistent with the results of coupled plasma emission spectroscopy. This study provides an intelligent sensing platform for the highly sensitive and selective detection of Fe3+ in the CF environment, and provides a promising strategy for the evaluation of the CF lifetime.

Digital Quantitative Analysis of the Relationship Between Periodontitis and Porphyromonas gingivalis

Porphyromonas gingivalis (P. gingivalis) constitutes an essential part of the subgingival dental plaque biofilm, serving as a significant factor in the development of periodontitis. Therefore, establishing a rapid and highly sensitive detection method for P. gingivalis is crucial to effectively manage periodontitis and its associated complications. In this study, droplet digital PCR (ddPCR) technology was employed for the detection of P. gingivalis, with a detection limit of 101 CFU/mL, exhibiting a 10-fold higher sensitivity compared to qPCR (with a sensitivity of 102 CFU/mL). Furthermore, no cross-reactivity was observed with four other bacterial species. In comparison to real-time quantitative PCR, ddPCR demonstrated enhanced sensitivity in detecting P. gingivalis at lower concentrations in 16 simulated samples, indicating its applicability for rapid detection of P. gingivalis.

Electrochemically polymerized dopamine activated carbon paste sensor for selective and sensitive detection of rutin in the presence of riboflavin

In this work, a sensor was developed for the quantification of RT in food and medicine samples using electro-polymerization of dopamine (DA) on the surface of a carbon paste electrode in 0.2 M phosphate buffered saline (PBS) of 7.0 pH by cyclic voltammetry. The surface properties of bare carbon paste electrode (BCPE) and poly (DA) modified carbon paste electrode (PDAMCPE) were studied using scanning electron microscopy (SEM), electrochemical impedance study (EIS), and cyclic voltammetry (CV) techniques. Two electron two proton transfer process was seen during the electrochemical reaction of RT with adsorption-controlled process. Under optimum conditions, the peak current increased linearly with an increase in RT concentration for CV in the range of 0.4 to 2.0 μM and differential pulse voltammetry (DPV) in the range of 0.4 to 2.5 μM and the limit of detection (LOD) was found to be 0.0045 μΜ and for CV and 0.079 μM for DPV techniques respectively. Even in the presence of some interferents like organic compounds and metal ions, the developed electrode exhibits good anti-interference ability for RT, and good selectivity was obtained for RT in the presence of riboflavin (RF). The developed sensor presents good stability, repeatability, and reproducibility. The CV measurement was performed for the analysis of RT in real samples such as green tea and medicine samples which showed a good recovery and this work has been not reported previously.

Reference genes to normalize body fluid identification data obtained using RT-qPCR

ABSTRACT The use of messenger RNA for body fluid identification has been well documented. While reference genes are commonly used for normalizing gene expression, the use of reference genes in forensic science is not straightforward. Degradation of samples, mixed body fluids, and small volumes contribute to the complexity of normalizing gene expression. To demonstrate normalization of gene expression for forensic body fluid identification, a preliminary study involving two reference genes (beta-2-microglobulin, B2M and glucose-6-phosphate dehydrogenase, G6PD) was undertaken. Novel reverse-transcription quantitative PCR (RT-qPCR) assays for circulatory blood, buccal swabs, menstrual fluid, spermatozoa, seminal fluid, and vaginal material were designed. An appropriate PCR efficiency for the B2M and G6PD reference gene assays across the body fluid panel was confirmed prior to assessing their expression levels. B2M was found to be more highly expressed across the different body fluids than G6PD. The normalization of target assay expression using both genes was investigated. However, high variation and poor sensitivity, particularly in buccal and semen samples, were observed for both, which would limit sensitivity and mixture detection in forensic casework. If CT values are the intended output rather than comparative quantification, we propose that reference gene normalization is not required and could be detrimental to interpretation.

Sensitive and on-Site Detection of Staphylococcus aureus Based on CRISPR/Cas 13a-Assisted Chemiluminescence Resonance Energy Transfer.

Developing a specific, sensitive, rapid, and on-site method for detecting pathogenic bacteria in food samples is critical to ensuring public safety. This article demonstrates a CRISPR/Cas13a system and a chemiluminescence resonance energy transfer (CRET) (CRISPR/Cas 13a-assisted CRET)-based strategy for sensitive and on-site detection of pathogenic bacteria in real samples. Once the hybrid double strand of aptamerS.aureus-cRNA recognizes the target model bacteria of Staphylococcus aureus (S. aureus), the released cRNA would bind with CRISPR/Cas 13a to form a complex of cRNA-CRISPR/Cas 13a, which could cleave the RNA molecule in the detecting probe of horseradish peroxidase (HRP) modified-gold nanoparticles (AuNPs) linked by RNA (AuNPs-RNA-HRP), resulting in an enhanced chemiluminescence signal due to the CRET "OFF" phenomenon after introducing the chemiluminescence substrate of luminol. The CRISPR/Cas 13a-assisted CRET strategy successfully detected S. aureus in drinking water and milk with detection limits of 20 and 30 cfu/mL, respectively, within the recovery of 90.07-105.50%. Furthermore, after integrating with an immunochromatographic test strip (ICTS), the CRISPR/Cas 13a-assisted CRET strategy achieved the on-site detection of as low as 102 cfu/mL of S. aureus in drinking water and milk via a smartphone, which is about 10 times lower than that in the previously reported AuNPs-based colorimetric ICTS, demonstrating a convenient and sensitive detection method for S. aureus in real samples.

Multi-Parameter Analysis of Nanoplastics in Flow: Taking Advantage of High Sensitivity and Time Resolution Enabled by Stimulated Raman Scattering.

Here, we demonstrate the detection of nanoplastics (NPLs) in flow with stimulated Raman scattering (SRS) for the first time. NPLs (plastic particles <1000 nm) have recently been detected in different environmental samples and personal care products. However, their characterization is still an analytical challenge. Multiple parameters, including size, chemical composition, and concentration (particle number and mass), need to be determined. In an earlier paper, online field flow fractionation (FFF)-Raman analysis with optical trapping was shown to be a promising tool for the detection of particles in this size range. SRS, which is based on the enhancement of a vibrational transition by the matching energy difference of two laser beams, would allow for much more sensitive detection and, hence, much shorter acquisition times compared to spontaneous Raman microspectroscopy (RM). Here, we show the applicability of SRS for the flow-based analysis of individual, untrapped NPLs. It was possible to detect polyethylene (PE), polystyrene (PS), and poly(methyl methacrylate) (PMMA) beads with diameters of 100-5000 nm. The high time resolution of 60.5 μs allows us to detect individual signals per particle and to correlate the number of detected particles to the injected mass concentration. Furthermore, due to the high time resolution, optically trapped beads could be distinguished from untrapped beads by their peak shapes. The SRS wavenumber settings add chemical selectivity to the measurement. Whereas optical trapping is necessary for the flow-based detection of particles by spontaneous RM, the current study demonstrates that SRS can detect particles in a flow without trapping. Additionally, the mean particle size could be estimated using the mean width (duration) and intensity of the SRS signals.

An ultrasensitive electrochemical biosensor based on logic transcription circuit-activated DNAzyme amplifier for flap endonuclease 1 activity detection

The accurate detection of flap endonuclease 1 (FEN1) activity is crucial for early cancer diagnosis and therapy. Herein, we have established a “target-substrate double-enhanced” DNA electrochemical biosensor by integrating a cleavage-ligation logic transcription circuit-activated DNAzyme amplifier with the transition-metal carbides-gold nanoparticles (MXene-Au) composites for the accurate detection of FEN1 activity. The FEN1 can be translated into a stable transcription hairpin DNA (TH), incorporating the catalytic strand of the DNAzyme via the logic transcription circuit. Then, the TH hybridizes with the substrate strand of DNAzyme and the DNAzyme amplifier can be activated, thus producing a significant quantity of single-stranded DNA (sDNA) and achieving the efficient amplification of the FEN1. Finally, the sDNA loaded with electroactive substances is immobilized on the capture DNA-anchored MXene-Au modified electrode, significantly enhancing the electrochemical signal intensity for highly sensitive FEN1 activity detection. The excellent selectivity and sensitivity of the proposed electrochemical biosensor can facilitate the accurate detection of FEN1 activity in biological samples and aid in screening FEN1-releated drugs. Additionally, three-input concatenated logic gates (AND-AND, INHIBIT-AND, and AND-OR) are constructed for FEN1 activity detection. Particularly, the AND-AND gate achieves logic detection of FEN1 activity in complex samples. Consequently, this bidirectionally enhanced electrochemical biosensor offers a novel analytical method for FEN1 activity detection, showing substantial promise for early diagnosis and drug discovery of FEN1-related disease.

Toehold Strand Displacement-Mediated Exponential HCR for Highly Sensitive and Specific Analysis of miRNA in Living Cells.

As an important disease biomarker, the development of sensitive detection strategies for miRNA, especially intracellular miRNA imaging strategies, is helpful for early diagnosis of diseases, pathological research, and drug development. Hybridization chain reaction (HCR) is widely used for miRNA imaging analysis because of its high specificity and lack of biological enzymes. However, the classic HCR reaction exhibits linear amplification with low efficiency, limiting its use for the rapid analysis of trace miRNA in living cells. To address this problem, we proposed a toehold-mediated exponential HCR (TEHCR) to achieve highly sensitive and efficient imaging of miRNA in living cells using β-FeOOH nanoparticles as transfection vectors. The detection limit of TEHCR was as low as 92.7 fM, which was 8.8 × 103 times lower compared to traditional HCR, and it can effectively distinguish single-base mismatch with high specificity. The TEHCR can also effectively distinguish the different expression levels of miRNA in cancer cells and normal cells. Furthermore, TEHCR can be used to construct OR logic gates for dual miRNA analysis without the need for additional probes, demonstrating high flexibility. This method is expected to play an important role in clinical miRNA-related disease diagnosis and drug development as well as to promote the development of logic gates.

Accelerated Screening of Alternative DNA Base-Organic Molecule-Base Architectures via Integrated Theory and Experiment.

Organic molecule-mediated noncanonical DNA self-assembly expands the standard DNA base-pairing alphabets. However, only a very limited number of small molecules have been recognized as mediators because of the tedious and complicated experiments like crystallization and microscopy imaging. Here we present an integrative screening protocol incorporating molecular dynamics (MD) for fast theoretical simulation and native polyacrylamide gel electrophoresis for convenient experimental validation. Melamine, the molecule that was confirmed mediating noncanonical DNA base-pairing, and 38 other candidate molecules were applied to demonstrate the feasibility of this protocol. We successfully identified seven stable noncanonical DNA duplex structures, and another eight novel structures with sub-stability. In addition, we discovered that hairpins at both ends can significantly stabilize the noncanonical DNA structures, providing a guideline to design small organic molecule-incorporated DNA structures. Such an efficient screening protocol will accelerate the design of alternative DNA-molecule architectures beyond Watson-Crick pairs. Considering the wide range of potential mediators, it will also facilitate applications such as noncovalent, highly dense loading of drug molecules in DNA-based delivery system and probe design for sensitive detection of certain molecules.

Crystallization and Solvent Evaporation Ionization Mass Spectrometry (CSEI-MS) for Rapid Detection of Drugs in Complex Matrices.

Illegal addition of drugs is common but seriously threatens public health safety. Conventional mass spectrometry methods are difficult to realize direct analysis of drugs existing in some complex matrices such as seawater or soil due to the ion suppression effect and contamination to MS parts caused by nonvolatile salts. In this work, a novel crystallization and solvent evaporation ionization mass spectrometry (CSEI-MS) method was constructed and developed to achieve rapid desalting detection. CSEI only consists of a heated plate and a nebulizer and exhibits excellent desalting performance, enabling direct analysis of six drugs dissolved in eight kinds of salt solutions (up to 200 mmol/L) and three complex salty matrices. Under optimized conditions, CSEI-MS presents high sensitivity, accuracy, linearity, and intraday and interday precision. Finally, this method is applied to the quantitative analysis of drugs in seawater, hand cream, and soil. Furthermore, the highly sensitive detection of CSEI-MS is demonstrated to remain even if the detection processes are conducted within 5 s via common commercial tools.

A Fluorescence Light-Up 3D DNA Walker Driven and Accelerated by Endogenous Adenosine-5'-triphosphate for Sensitive and Rapid Label-Free MicroRNA Detection and Imaging in Living Cells.

Herein, a fluorescence light-up 3D DNA walker (FLDW) was powered and accelerated by endogenous adenosine-5'-triphosphate (ATP) molecules to construct a biosensor for sensitive and rapid label-free detection and imaging of microRNA-221 (miRNA-221) in malignant tumor cells. Impressively, ATP as the driving force and accelerator for FLDW could significantly accelerate the operation rate of FLDW, reduce the likelihood of errors in signaling, and improve the sensitivity of detection and imaging. When FLDW was initiated by output DNA H1-op transformed by target miRNA-221, G-rich sequences in the S strand, anchored to AuNP, were exposed to form G-quadruplexes (G4s), and thioflavin T (ThT) embedded in the G4s emitted intense fluorescence to realize sensitive and rapid detection of target miRNA-221. Meanwhile, the specific binding of ThT to G4 with a weak background fluorescence response was utilized to enhance the signal-to-noise ratio of the label-free assay straightforwardly and cost-effectively. The proposed FLDW system could realize sensitive detection of the target miRNA-221 in the range of 1 pM to 10 nM with a detection limit of 0.19 pM by employing catalytic hairpin assembly (CHA) to improve the conversion of the target. Furthermore, by harnessing the abundant ATP present in the tumor microenvironment, FLDW achieved rapid and accurate imaging of miRNA-221 in cancer cells. This strategy provides an innovative and high-speed label-free approach for the detection and imaging of biomarkers in cancer cells and is expected to be a powerful tool for bioanalysis, diagnosis, and prognosis of human diseases.

Metabuli: sensitive and specific metagenomic classification via joint analysis of amino acid and DNA.

Metagenomic taxonomic classifiers analyze either DNA or amino acid (AA) sequences. Metabuli ( https://metabuli.steineggerlab.com ), however, jointly analyzes both DNA and AA to leverage AA conservation for sensitive homology detection and DNA mutations for specific differentiation of closely related taxa. In the Critical Assessment of Metagenome Interpretation 2 plant-associated dataset, Metabuli covered 99% and 98% of classifications of state-of-the-art DNA- and AA-based classifiers, respectively.

Dual targeting negative enrichment strategy for highly sensitive and purity detection of CTCs

Circulating tumor cells (CTCs) have significant clinical value in early tumor detection, dynamic monitoring and immunotherapy. CTC detection stands out as a leading non-invasive approach for tumor diagnostics and therapeutics. However, the high heterogeneity of CTCs and the occurrence of epithelial-mesenchymal transition (EMT) during metastasis pose challenges to methods relying on EpCAM-positive enrichment. To address these limitations, a method based on negative enrichment of CTCs using specific leukocyte targets has been developed. In this study, aiming to overcome the low purity associated with immunomagnetic beads targeting solely the leukocyte common antigen CD45, we introduced CD66b-modified immunomagnetic beads. CD66b, a specific target for neutrophils with abundant residues, was chosen as a complementary approach. The process involved initial collection of nucleated cells from whole blood samples using density gradient centrifugation. Subsequently, magnetically labeled leukocytes were removed by magnetic field, enabling the capture of CTCs with higher sensitivity and purity while retaining their activity. Finally, we selected 20 clinical blood samples from patients with various cancers to validate the effectiveness of this strategy, providing a new generalized tool for the clinical detection of CTCs.

Highly Sensitive Diethylamine Detection at Room Temperature Using g-C3N4 Nanosheets Decorated with CuO Hollow Polyhedral Structures.

Chemiresistive-based metal oxide semiconductor (MOS) gas sensors are widely used in gas sensing due to their advantageous properties. Graphitic carbon nitride (g-C3N4) and metal oxide heterostructure materials can improve charge transport properties, selectivity, and sensitivity in MOS gas sensor materials. Herein, for the first time, CuO hollow polyhedral structures (HPSs) were synthesized via a hydrothermal technique and annealed at different temperatures, with the 400 °C annealed (CuO-400 HPSs) demonstrating remarkable sensing capabilities for diethylamine (DEA) gas at room temperature (RT). The x-g-C3N4 nanosheets were decorated with CuO HPSs in varying amounts (x = 0.8, 1.8, 2.1, and 3.1 wt %) and then annealed at 400 °C for x-g-C3N4-CuO-400 hollow polyhedral heterostructures (HPHSs). Indeed, among the synthesized samples, the 1.8%-g-C3N4-CuO-400 HPHSs have a higher sensitivity to DEA (resistance change in gas (Rg) and air (Ra); Rg/Ra= 65 @ 20 ppm), a low detection limit (Rg/Ra= 6 @ 500 ppb), wide dynamic response (Rg/Ra= 190 @ 80 ppm), strong stability (30 days), and 21.6 times higher sensitivity than pure CuO at RT toward 20 ppm of DEA. The exceptional gas-sensing behavior can be attributed to various factors, including controlled annealing conditions that result in the formation of well-defined structures and greater porosity, efficient charge transfer properties resulting from an optimized ratio of g-C3N4 to CuO in HPHSs, an abundance of defects, unsaturated Cu sites, and synergistic effects. The study presents a universal strategy for generating sensitive and selective g-C3N4-based composite materials for low-temperature gas sensors.

Smartphone Motivated Highly Selective and Sensitive Colorimetric Detection of Hg2+ through Limonin Derived Silver Nanoparticles

Smartphone Motivated Highly Selective and Sensitive Colorimetric Detection of Hg2+ through Limonin Derived Silver Nanoparticles

D-π-A Carbzazole Based Reactive Cyano-Substituted C = C bond Probe for Selective and Sensitive Detection of Hydrazine in Aqueous Media.

This work established a newly designed and synthesized carbazole N-phenyl π-conjugated vinyl malononitrile (CPM) fluorescent sensor, which showed typical and remarkable redshift emission properties with different polarity index solvents. Investigative probe CPM is colorimetric and fluorimetric ultrafast and ultrasensitive detection of hazardous hydrazine in an aqueous medium. Furthermore, CPM showed colorimetric and fluorometric responses to interference tests with other amines and high selectivity for detecting hydrazine without interference with other amines in colorimetric and fluorimetric methods. This probe CPM for hydrazine was as low as the lower detection limit value of 2.21 × 10- 8 M. The probe CPM expects significant attention due to its simplicity and cost-effectiveness in detecting hazardous hydrazine. UV-vis, PL, NMR, and MS spectra confirmed the mechanism of probe CPM detection of hazardous hydrazine. However, making a piece test kit attractive for practical hydrazine vapor leak-detection applications is easy. This study can be applied to many pipeline gas transmission industries and transportation facility sectors.