Sensitive Detection Of uracil-DNA Glycosylase Activity Research Articles

A structure change-induced fluorescent biosensor for uracil-DNA glycosylase activity detection based on the substrate preference of Lambda exonuclease

As one of the initiating DNA glycosylases in the base excision repair pathway, Uracil-DNA glycosylase (UDG) plays a pivotal role in maintaining genomic integrity. The abnormal expression of UDG in the organism is highly relevant to multiple diseases. Thus, rapid and sensitive detection of UDG activity is essential to aid early clinical diagnosis and biomedical research. Here we developed a rapid, sensitive and selective biosensor for UDG activity detection based on the substrate preference of Lambda exonuclease (λ exo). The protruding end in the substrate produced by UDG could be digested at a markedly high rate by λ exo, generating a detectable fluorescence signal. This proposed strategy for UDG detection exhibited high selectivity and high sensitivity (0.0001 U/mL) in a short time. It has also been successfully applied to detect UDG in real biological samples and the screening of UDG inhibitors.

Smart Catalyzed Hairpin Assembly-Induced DNAzyme Nanosystem for Intracellular UDG Imaging.

Uracil DNA glycosylase (UDG) is one of the key initiators for the base excision repair pathway. Since abnormal UDG expression is associated with various diseases, sensitive detection of UDG activity is critical for early clinical diagnosis. Here, a smart catalyzed hairpin assembly (CHA)-DNAzyme nanosystem is developed for intracellular UDG imaging by incorporating CHA and DNAzyme onto MnO2 nanosheets. In this strategy, the biodegradable MnO2 nanosheets are employed as nanocarriers for efficiently adsorbing and delivering five DNA probes into cells by endocytosis. Then, the MnO2 nanosheets are degraded by cellular glutathione to release the DNA modules at the same intracellular position. Liberated Mn2+, an indispensable DNAzyme cofactor, was used to promote catalytic cleavage for facilitating the cascade process in cells. Based on the uracil site-recognition and -excision operation of the target UDG, the activated CHA-DNAzyme nanosystem generates lots of DNAzyme-assisted CHA products, turning on the fluorescence resonance energy transfer response. This autocatalytic CHA-DNAzyme nanosystem provides a detectable minimum UDG concentration of 0.23 mU/mL, which is comparable to some reported UDG detection approaches. As a multiple signal amplification strategy, the CHA-DNAzyme nanosystem realizes the UDG imaging in living cells with enhanced sensitivity, indicating great promise in the prediction and diagnosis of early-stage cancer.

The dumbbell probe mediated triple cascade signal amplification strategy for sensitive and specific detection of uracil DNA glycosylase activity

Uracil DNA glycosylase (UDG) is a key base excision repair (BER) enzyme and its abnormal expression is nearly relevant to several diseases including cancer. The sensitive detection of UDG activity is beneficial for biomedical studies and clinic diagnosis. In this work, we proposed a dumbbell probe mediated triple cascade signal amplification strategy for sensitive and specific detection of UDG activity. The specially designed dumbbell probe contained two uracil bases, two recognition sites for nicking enzyme and a split sequence of DNAzyme. Unsealed dumbbell probes were first connected into sealed dumbbell probes by T4 DNA ligase, and then the unsealed probes were hydrolyzed by exonuclease to ensure the purity of probes. Under the influence of UDG, two uracil bases were removed to produce two apyrimidinic (AP) sites, which were subsequently cleaved by Endo.IV. The probes after cleavage acted as primers and templates for double nicking sites strand displacement amplification (SDA) to produce a mass of two products. The products of SDA continued to act as primers and templates for rolling circle amplification (RCA) to produce repeats containing complete DNAzyme sequences. The DNAzyme repeatedly cleaved multiple molecular beacons (MB), resulting in remarkable fluorescence enhancement. Benefiting from the triple cascade signal amplification, the sensitivity was improved and the detection limit was 7.2 × 10−5 U mL−1. The method could well distinguish UDG from other interfering enzymes and detect UDG activity in real biological samples, showing good specificity. In addition, this method could be used for screening inhibitors. The above results suggested that the method provided a promising analytical means for UDG related biomedical research and clinic diagnosis.

Integration of magnetic separation and real-time ligation chain reaction for detection of uracil-DNA glycosylase.

Uracil-DNA glycosylase (UDG) is a protein enzyme that initiates the base excision repair pathway for maintaining genome stability. Sensitive detection of UDG activity is important in the study of many biochemical processes and clinical applications. Here, a method for detecting UDG is proposed by integrating magnetic separation and real-time ligation chain reaction (LCR). First, a DNA substrate containing uracil base is designed to be conjugated to the magnetic beads. By introducing a DNA complementary to the DNA substrate, the uracil base is recognized and removed by UDG to form an apurinic/apyrimidinic (AP) site. The DNA substrate is then cut off from the AP site by endonuclease IV, releasing a single-strand DNA (ssDNA). After magnetic separation, the ssDNA is retained in the supernatant and then detected by real-time LCR. The linear range of the method is 5 × 10-4 to 5U/mL with four orders of magnitude, and the detection limit is 2.7 × 10-4 U/mL. In the assay, ssDNA template obtained through magnetic separation can prevent other DNA from affecting the subsequent LCR amplification reaction, which provides a simple, sensitive, specific, and universal way to detect UDG and other repair enzymes. Furthermore, the real-time LCR enables the amplification reaction and fluorescence detection simultaneously, which simplifies the operation, avoids post-contamination, and widens the dynamic range. Therefore, the integration of magnetic separation and real-time LCR opens a new avenue for the detection of UDG and other DNA repair enzymes.

Terminal Deoxynucleotidyl Transferase and T7 Exonuclease-Aided Amplification Strategy for Ultrasensitive Detection of Uracil-DNA Glycosylase.

As one of the key initiators of the base excision repair process, uracil-DNA glycosylase (UDG) plays an important role in maintaining genomic integrity. It has been found that aberrant expression of UDG is associated with a variety of diseases. Thus, accurate and sensitive detection of UDG activity is of critical significance for biomedical research and early clinical diagnosis. Here, we developed a novel fluorescent sensing platform for UDG activity detection based on a terminal deoxynucleotidyl transferase (TdT) and T7 exonuclease (T7 Exo)-aided recycling amplification strategy. In this strategy, only two DNA oligonucleotides (DNA substrate containing one uracil base and Poly dT probe labeled with a fluorophore/quencher pair) are used. UDG catalyzes the removal of uracil base from the enclosed dumbbell-shape DNA substrate to give an apyrimidinic site, at which the substrate oligonucleotide is cleaved by endonuclease IV. The released 3'-end can be elongated by TdT to form a long deoxyadenine-rich (Poly dA) tail, which may be used as a recyclable template to initiate T7 Exo-mediated hybridization-digestion cycles of the Poly dT probe, giving a significantly enhanced fluorescence output. The proposed UDG-sensing strategy showed excellent selectivity and high sensitivity with a detection limit of 1.5 × 10-4 U/mL. The sensing platform was also demonstrated to work well for UDG inhibitor screening and inhibitory activity evaluation, thus holding great potential in UDG-related disease diagnosis and drug discovery. The proposed strategy can be easily used for the detection of other DNA repair-related enzymes by simply changing the recognition site in DNA substrate and might also be extended to the analysis of some DNA/RNA-processing enzymes, including restriction endonuclease, DNA methyltransferase, polynucleotide kinase, and so on.

Integrating DNA structure switch with branched hairpins for the detection of uracil-DNA glycosylase activity and inhibitor screening

The detection of uracil-DNA glycosylase (UDG) activity is pivotal for its biochemical studies and the development of drugs for UDG-related diseases. Here, we explored an integrated DNA structure switch for high sensitive detection of UDG activity. The DNA structure switch containing two branched hairpins was employed to recognize UDG enzyme and generate fluorescent signal. Under the action of UDG, one branched hairpin was impelled folding into a close conformation after the excision of the single uracil. This reconfigured hairpin could immediately initiate the polymerization/nicking amplification reaction of another branched hairpin accompanying with the release of numerous G-quadruplexes (G4s). In the absence of UDG, the DNA structure switch kept its original configuration, and thus the subsequent polymerization/nicking reaction was inhibited, resulting in the release of few G4 strands. In this work, Thioflavin T was used as signal reporter to target G4s. By integrating the DNA structure switch, the quick response and high sensitivity for UDG determination was achieved and a low detection limit of 0.0001U/mL was obtained, which was superior to the most fluorescent methods for UDG assay. The repeatability of the as-proposed strategy was demonstrated under the concentration of 0.02U/mL and 0.002U/mL, the relative standard deviation obtained from 5 successive samples were 1.7% and 2.8%, respectively. The integrated DNA structure switch strategy proposed here has the potential application for the study of mechanism and function of UDG enzyme and the screening the inhibitors as potential drugs and biochemical tools.

A label-free and highly sensitive strategy for uracil-DNA glycosylase activity detection based on stem-loop primer-mediated exponential amplification (SPEA)

Uracil-DNA glycosylase (UDG) plays essential roles in base excision repair (BER) pathway by eliminating uracil from DNA to sustain the genome integrity. Sensitive detection of UDG activity is of great significance in the study of many fundamental biochemical processes and clinical applications. We develop a label-free method for UDG activity detection using stem-loop primer-mediated exponential amplification (SPEA). In the presence of active UDG, the uracil base in helper hairpin probe (HP) can be excised to generate an abasic site (AP site), which can be cleaved by endonuclease IV (Endo IV) with a blocked primer released. This primer then triggers the strand displacement reaction to produce a dumb-bell structure DNA, which can initiate a loop-mediated isothermal amplification (LAMP) reaction. This reaction generates a large number of long double-strand DNA replicates, which can be stained by SYBR Green (SG) I to deliver enhanced fluorescence for quantitative detection of UDG activity. A linear range from 0.001 U/mL to 1 U/mL and a detection limit down to 0.00068 U/mL are achieved. This strategy has also been demonstrated for UDG assay in complex cell lysates, implying its great potential for UDG based clinical diagnostics and therapeutics.

Toehold-mediated strand displacement reaction-dependent fluorescent strategy for sensitive detection of uracil-DNA glycosylase activity

Sensitive detection of uracil-DNA glycosylase (UDG) activity is beneficial for evaluating the repairing process of DNA lesions. Here, toehold-mediated strand displacement reaction (TSDR)-dependent fluorescent strategy was constructed for sensitive detection of UDG activity. A single-stranded DNA (ssDNA) probe with two uracil bases and a trigger sequence were designed. A hairpin probe with toehold domain was designed, and a reporter probe was also designed. Under the action of UDG, two uracil bases were removed from ssDNA probe, generating apurinic/apyrimidinic (AP) sites. Then, the AP sites could inhibit the TSDR between ssDNA probe and hairpin probe, leaving the trigger sequence in ssDNA probe still free. Subsequently, the trigger sequence was annealed with the reporter probe, initiating the polymerization and nicking amplification reaction. As a result, numerous G-quadruplex (G4) structures were formed, which could bind with N-methyl-mesoporphyrin IX (NMM) to generate enhanced fluorescent signal. In the absence of UDG, the ssDNA probe could hybridize with the toehold domain of the hairpin probe to initiate TSDR, blocking the trigger sequence, and then the subsequent amplification reaction would not occur. The proposed strategy was successfully implemented for detecting UDG activity with a detection limit of 2.7×10−5U/mL. Moreover, the strategy could distinguish UDG well from other interference enzymes. Furthermore, the strategy was also applied for detecting UDG activity in HeLa cells lysate with low effect of cellular components. These results indicated that the proposed strategy offered a promising tool for sensitive quantification of UDG activity in UDG-related function study and disease prognosis.

Optimization of strand displacement amplification-sensitized G-quadruplex DNAzyme-based sensing system and its application in activity detection of uracil-DNA glycosylase

As an isothermal nucleic acid amplification technique, strand displacement amplification (SDA) reaction has been introduced in G-quadruplex DNAzyme-based sensing system to improve the sensing performance. To further provide useful information for the design of SDA-amplified G-quadruplex DNAzyme-based sensors, the effects of nicking site number in SDA template DNA were investigated. With the increase of the nicking site number from 1 to 2, enrichment of G-quadruplex DNAzyme by SDA is changed from a linear amplification to an exponential amplification, thus greatly increasing the amplification efficiency and subsequently improving the sensing performance of corresponding sensing system. The nicking site number cannot be further increased because more nicking sites might result in high background signals. However, we demonstrated that G-quadruplex DNAzyme enrichment efficiency could be further improved by introducing a cross-triggered SDA strategy, in which two templates each has two nicking sites are used. To validate the proposed cross-triggered SDA strategy, we used it to develop a sensing platform for the detection of uracil-DNA glycosylase (UDG) activity. The sensor enables sensitive detection of UDG activity in the range of 1×10−4–1U/mL with a detection limit of 1×10−4U/mL.

A novel and label-free biosensors for uracil-DNA glycosylase activity based on the electrochemical oxidation of guanine bases at the graphene modified electrode

Uracil-DNA glycosylase (UDG) as an important base excision repair enzymes is widely distributed in organism, and it plays a crucial role in sustaining the genome integrity. Therefore, it is significant to carry out the analysis of UDG activity. In this present work, a novel and label-free electrochemical sensing platform for the sensitive detection of uracil DNA glycosylase (UDG) activity has been developed. Herein, the graphene modified glassy carbon (GC) electrode was prepared. And two complementary DNA strands were hybridized to form dsDNA (P1P2). In the presence of UDG, the uracil bases in P1P2 were specifically hydrolyzed, inducing the unwinding of the DNA duplex, and accompanied by the release of P1. Thus, the released P1 was adsorbed onto the graphene/GC electrode surface via π–π stacking. By investigating the electrochemical behavior of P1 at the graphene/GC electrode, the electrochemical oxidation of guanine bases in P1 was obviously observed. Therefore, using the current responses of guanine base in P1 as a signal indicator, UDG activity can be simply determined with high sensitivity, and the detectable lowest concentration is 0.01U/mL. This present design does not need covalent attachment of redox indicator to DNA, preventing participation of redox labels in the background. Meanwhile, the proposed strategy for the assay of UDG activity also has a remarkable sensitivity due to the excellent properties of graphene, which could increase both the immobilization amount of released ssDNA and the conductivity of the sensing system. All these elucidate that this developed protocol may lay a potential foundation for the sensitive detection of UDG activity in clinical diagnosis.

A DNA machine-based fluorescence amplification strategy for sensitive detection of uracil-DNA glycosylase activity

Sensitive detection of uracil-DNA glycosylase (UDG) activity is critical for function study of UDG and clinical diagnosis. Here, we developed a novel fluorescent strategy for sensitive detection of UDG activity based on the signal amplification by a label-free and enzyme-free DNA machine. A double-strand DNA (dsDNA) probe P1–P2 with uracil bases and trigger sequence was designed for UDG recognition and signal transduction. Two hairpin probes H1 and H2 which were partially complementary were employed to construct the label-free and enzyme-free DNA machine. Under the action of UDG, uracil bases were removed from the P1-P2 dsDNA probe, and then a strand P2ʹ with abasic sites was released. Subsequently, the liberated P2ʹ activated the DNA machine and generated numerous H1–H2 complexes containing G-quadruplex (G4) structures in the end. Finally, the G4 structures could bind with N-methylmesoporphyrin IX (NMM) to form G4-NMM complexes with the enhanced fluorescence responses. This strategy could detect UDG activity as low as 0.00044U/mL. In addition, the strategy was also applied for the analysis of UDG activity in HeLa cells lysate with low effect of cellular components. Moreover, this strategy was successfully applied for assaying the inhibition of UDG using uracil glycosylase inhibitor (UGI). This strategy provided a potential tool for sensitive quantification of UDG activity in UDG functional study and clinical diagnosis.