Semi-synthetic Polymers Research Articles

Cellulose Acetate-Based Wound Dressings Loaded with Bioactive Agents: Potential Scaffolds for Wound Dressing and Skin Regeneration.

Wound healing and skin regeneration are major challenges in chronic wounds. Among the types of wound dressing products currently available in the market, each wound dressing material is designed for a specific wound type. Some of these products suffer from various shortcomings, such as poor antibacterial efficacy and mechanical performance, inability to provide a moist environment, poor permeability to oxygen and capability to induce cell migration and proliferation during the wound healing process. Hydrogels and nanofibers are widely reported wound dressings that have demonstrated promising capability to overcome these shortcomings. Cellulose acetate is a semisynthetic polymer that has attracted great attention in the fabrication of hydrogels and nanofibers. Loading bioactive agents such as antibiotics, essential oils, metallic nanoparticles, plant extracts, and honey into cellulose acetate-based nanofibers and hydrogels enhanced their biological effects, including antibacterial, antioxidant, and wound healing. This review reports cellulose acetate-based hydrogels and nanofibers loaded with bioactive agents for wound dressing and skin regeneration.

The Effect of Sub-Acute Inhalation Exposure to Polyethylene and Polyvinyl Chloride Micro-Nano Plastics on the Superoxide Dismutase (SOD) Level and Malondialdehyde (MDA) Level in Rat Ovary

Plastic is a synthetic or semi-synthetic organic polymer that is widely used in daily life and in industrial production. Microplastics are widespread contaminants and can enter the human body through the consumption of foods containing microplastics, inhalation of microplastics in the air, and skin contact with microplastic particles present in products. Microplastics can enter the ovaries as foreign bodies and can cause inflammation, oxidative stress, and even ovarian granulosa cell death. Polyethylene plastic shards generally have a higher ability to absorb environmental toxins than other types of plastic. Polyvinyl chloride (PVC) is one of the oldest thermoplastic polymers that is often used as water pipes. PVC has carcinogenic monomers and some harmful additives. This study aims to determine the effect of subacute exposure to micro-nanoplastics per inhalation on SOD and MDA levels in rat ovaries. The research method used is a true experimental design with a Randomize Post Test Only Group Design research design. This study used the ovarian organs of female white rats that had been exposed to PVC and PE for 28 days. The number of samples used in this study amounted to 18 female rats. Subacute exposure to micro-nanoplastics per inhalation can lower SOD levels and significantly increase MDA levels in rat ovaries. This study is expected to provide knowledge and an overview for future research on the mechanism of toxicity of micro-nanoplastic exposure that has an impact on female infertility through free radicals in the ovaries.

Synthesis and optimization of chitosan-incorporated semisynthetic polymer/α-Fe2O3 nanoparticle hybrid polymer to explore optimal efficacy of fluorescence resonance energy transfer/charge transfer for Co(II) and Ni(II) sensing

Initially, four synthetic fluorescent polymers (SFPs) are synthesized from α-methacrylic acid and methanolacrylamide monomers carrying –C(=O)OH and –C(=O)NH subfluorophores, respectively. Among SFPs, ∼1:1 incorporation of subfluorophores in the optimum SFP3 is explored by spectroscopic analyses. Subsequently, chitosan is incorporated in SFP3 to produce five semi-synthetic fluorescent polymers (SSFPs). The maximum incorporation of chitosan in SSFP4 is supported by different spectroscopies. In SSFP4, strong electrostatic interactions among polar functionalities of chitosan and synthetic polymer favor resonance-associated charge transfer (RCT) from SSFP4-(amide) to SSFP4-(canonical). Finally, three hybrid fluorescent polymers (HFPs) are fabricated encapsulating iron-oxide nanoparticle within SSFP4. The maximum proportion of hematite (α-Fe2O3) phase in HFPs is explored by spectroscopic, magnetometric, microscopic, and light scattering studies. HFP2 shows local/RCT/fluorescence resonance energy transfer (FRET) emission at 393/460/570 nm. In HFP2, FRET, RCT, and ratiometric pH-sensing within 3.0–6.5 phenomena are explored by solvent polarity effects, time-correlated single photon counting, quantum yield measurements, alongside I431/I460 vs pH plots. RCT and FRET emissions of HFP2 are utilized for selective sensing of Co(II)/Ni(II) with limits of detection of 4.990 ppb (460 nm)/4.353 ppb (570 nm) and 45.041 ppb (428 nm)/29.617 ppb (527 nm) in organic and aqueous solutions, respectively.

Synthesis of Gelatin Methacryloyl Analogs and Their Use in the Fabrication of pH-Responsive Microspheres.

pH-responsive hydrogels have numerous applications in tissue engineering, drug delivery systems, and diagnostics. Gelatin methacryloyl (GelMA) is a biocompatible, semi-synthetic polymer prepared from gelatin. When combined with aqueous solvents, GelMA forms hydrogels that have extensive applications in biomedical engineering. GelMA can be produced with different degrees of methacryloyl substitution; however, the synthesis of this polymer has not been tuned towards producing selectively modified materials for single-component pH-responsive hydrogels. In this work, we have explored two different synthetic routes targeting different gelatin functional groups (amine, hydroxyl, and/or carboxyl) to produce two GelMA analogs: gelatin A methacryloyl glycerylester (polymer A) and gelatin B methacrylamide (polymer B). Polymers A and B were used to fabricate pH-responsive hydrogel microspheres in a flow-focusing microfluidic device. At neutral pH, polymer A and B microspheres displayed an average diameter of ~40 µm. At pH 6, microspheres from polymer A showed a swelling ratio of 159.1 ± 11.5%, while at pH 10, a 288.6 ± 11.6% swelling ratio was recorded for polymer B particles.

Application of Nanotechnology for Targeted Drug Delivery and Nontoxicity

Nanotechnology has applications in various fields of medicine. The health and biomedical fields can apply nanotechnology to treatment and drug delivery, enabling the targeted and controlled delivery of drugs and therapeutic compounds. Normally, the body quickly metabolizes drugs upon their entry, potentially affecting their efficiency. Additionally, drugs are often unable to specifically target cells, leading to harmful effects on healthy cells. Nanotechnology is currently being used to address these issues. Nanoparticles, which are tiny particles made up of either synthetic or semi-synthetic polymers, have introduced targeted drug delivery by allowing accurate and regulated secretion of therapeutic agents at specific activity sites. Their efficiency depends on features such as size, shape, surface, charge, and loading techniques. By utilizing their distinct attributes, nanoparticles can overcome biological barriers, improving the bioavailability of drugs and decreasing systemic toxicity. However, excessive use of nanotechnology also raises concerns about its potential nanotoxicity. The interaction between biological systems and nanoparticles can lead to hazardous effects such as genotoxicity, oxidative stress, inflammation, and neurotoxicity. Thus, it is important to examine the nanotoxicity of nanoparticles and develop various ways to diminish their toxic effects. This review aims to summarize the use of nanoparticles for drug delivery to specific sites, as well as their nanotoxicity.

FORMULATION AND EVALUATION OF LOSARTAN POTASSIUM MATRIX TABLETS BY USING DIFFERENT POLYMERS

The study aims to create a sustained release matrix tablet for Losartan potassium, an angiotensin II receptor antagonist, to improve patient compliance and maintain therapeutic blood or tissue levels for extended periods. The research investigates the role of novel semi-synthetic polymers and natural polymers in comparison to well-known release retarding agents. Gastroretentive drug delivery systems (GRDDS) are unique technologies designed to improve drug bioavailability and absorption by avoiding the first-pass effect. Losartan potassium, an angiotensin II receptor antagonist, has a bioavailability of 32% and a low elimination half-life, making it suitable for oral controlled release. The study utilized natural and synthetic polymers in matrix tablet preparation, concentration, drug particles size, additives, and excipients to modify drug release. The powder mixtures were tested for pre-compression parameters and post-compression parameters, and in-vitro dissolution studies showed good dissolution profiles for drug release. Formulations with higher concentrations and polymers sustained drug release for 24 hours. FT-IR Spectroscopy confirmed drug compatibility with polymers and other excipients KEYWORDS: matrix tablets, Losartan Potassium, flow properties, pre compression parameters post compression parameters, In-vitro dissolution.

Kelp forest food webs as hot spots for the accumulation of microplastic and polybrominated diphenyl ether pollutants

Kelp forests (KFs) are one of the most significant marine ecosystems in the planet. They serve as a refuge for a wide variety of marine species of ecological and economic importance. Additionally, they aid with carbon sequestration, safeguard the coastline, and maintain water quality. Microplastic (MP) and polybrominated diphenyl ethers (PBDEs) concentrations were analyzed across trophic levels in KFs around Todos Santos Bay. Spatial variation patterns were compared at three sites in 2021 and temporal change at Todos Santos Island (TSI) in 2021 and 2022. We analyzed these MPs and PBDEs in water, primary producers (Macrocystis pyrifera), grazers (Strongylocentrotus purpuratus), predators (Semicossyphus pulcher), and kelp detritus. MPs were identified in all samples (11 synthetic and 1 semisynthetic polymer) and confirmed using Fourier-transform infrared microspectroscopy–attenuated total reflectance (μ-FTIR-ATR). The most abundant type of MP is polyester fibers. Statistically significant variations in MP concentration were found only in kelps, with the greatest average concentrations in medium-depth kelps from TSI in 2022 (0.73 ± 0.58 MP g−1 ww) and in the kelp detritus from TSI in 2021 (0.96 ± 0.64 MP g−1 ww). Similarly, PBDEs were found in all samples, with the largest concentration found in sea urchins from Punta San Miguel (0.93 ± 0.24 ng g−1 ww). The similarity of the polymers can indicate a trophic transfer of MPs. This study shows the extensive presence of MP and PBDE subtropical trophic web of a KF, but correlating these compounds in environmental samples is highly complex, influenced by numerous factors that could affect their presence and behavior. However, this suggests that there is a potential risk to the systems and the services that KFs offer.

NATURALLY OCCURRING SWELLABLE POLYSACCHARIDES-BASED STIMULI-RESPONSIVE SMART TABLETS – A NEW WINDOW OF OPPORTUNITY

Currently, synthetic and semi-synthetic polymers are widely used in the development of various drug delivery systems (DDSs), biomedical and surgical devices, and healthcare materials. However, many drawbacks and problems are associated with these polymeric materials, including toxicity, immunogenicity, non-biodegradability, non-biocompatibility, and complicated, costly synthesis. To address such drawbacks, nowadays, naturally occurring swellable polysaccharides (NOSPs) are being evaluated for the possible replacement of synthetic polymers. NOSPs have shown remarkable stimuli-responsive properties, which made them an ideal material to develop stimuli-responsive DDSs, especially “smart tablets”. The present review focuses on the summarization of stimuli-responsive properties (swelling, on-off switching, and drug release) of smart/stimuli-responsive tablets that respond to various stimuli, e.g., pH, solvent, transit, time, etc. This article highlights the need to develop NOSPs-based smart tablets for intelligent and targeted drug delivery.

Activated carbon cellulose acetate based as effective adsorbent of contaminants from water

Various methods can be employed to remove pollutants from wastewater. Among these, adsorption using activated carbon materials has proven effective. This work proposes the use of a hazardous waste made from a semisynthetic polymer, cellulose acetate from cigarette butts, as raw material to produce activated carbons (AC). Four adsorbents were prepared from dirty and clean cigarette butts; two chemically activated carbons using phosphoric acid and two physically activated carbons using water vapor at 623 K. The carbons were characterized using FTIR, SEM, Nitrogen adsorption, and their points of zero charge. AC produced showed high potential as adsorbents for cleaning hazardous dyes from aqueous solutions. Adsorption isotherms were constructed for the textile dyes on the carbons, and these data were treated using Langmuir's equation to quantitatively describe the adsorption process. The adsorption of dyes with an initial concentration of 300 mg dm−3 showed adsorption percentages closed to the 100% for cationic dyes, while these oscillated between 40% and 100% for anionic dyes with the four activated carbons. The highest values of monolayer capacity (am) were achieved with the activated carbon prepared from cellulose acetate without prior treatment. Monolayer capacity with values ranging from 185 to 277 mg g−1 for cationic dyes and 126–178 mg g−1 for anionic dyes were obtained. Therefore, any waste of cellulose acetate can be used to obtain activated carbons with excellent adsorption capacities for dyes Methylene Blue, Crystal Violet, Malachite Green, Sirius Turquoise and Fluorescein.

A Review on Green Synthesis of Nanoparticles Using Natural Gums

The nanoparticles due to their nano-size can convey the drug at nanoscales and distribute it to the targeted site in a required design. Their specialized mechanism of uptake enables the enhanced bioavailability of a drug. The formulation of nanoparticles may be done using synthetic, semisynthetic, or natural polymers. Synthetic polymers employed for the development of nanoparticles can cause toxicity but the use of natural polymers can facilitate a non-toxic process for the synthesis. It is a recent trend to use natural materials in place of synthetic ones. Natural gums can be employed as natural reducing and capping agents for just nanotechnology production, and they may indirectly or directly impact the formulation's release and absorption rates. In other cases, they can have a medicinal synergic application to nano-formulations. The involvement of polymers to formulate the nanoparticles is contingent on their physical and chemical properties and the drug to be loaded. Natural gums act as an excellent template for drug loading and may be used as nanoparticles for controlled release properties. This review tried to give light on various natural gums that can be utilized for the synthesis of nanoparticles.

Physiological response of mussel to rayon microfibers and PCB's exposure: Overlooked semi-synthetic micropollutant?

Rayon microfibers, micro-sized semi-synthetic polymers derived from cellulose, have been frequently detected and reported as "micropollutants" in marine environments. However, there has been limited research on their ecotoxicity and combined effects with persistent organic pollutants (POPs). To address these knowledge gaps, thick-shell mussels (Mytilus coruscus) were exposed to rayon microfibers at 1000 pieces/L, along with polychlorinated biphenyls (PCBs) at 100 and 1000 ng/L for 14 days, followed by a 7-day recovery period. We found that rayon microfibers at the environmentally relevant concentration exacerbated the irreversible effects of PCBs on the immune and digestive systems of mussels, indicating chronic and sublethal impacts. Furthermore, the results of 16 s rRNA sequencing demonstrated significant effects on the community structure, species richness, and diversity of the mussels' intestinal microbiota. The branching map analysis identified the responsive bacteria to rayon microfibers and PCBs belonging to the Proteobacteria, Actinobacteriota, and Bacteroidota phyla. Despite not being considered a conventional plastic, the extensive and increasing use of rayon fibers, their direct toxicological effects, and their interaction with POPs highlight the need for urgent attention, investigation, and regulation to address their contribution to "micropollution".

Preparation, in vitro and in vivo Characteristics of Floating in situ Gel of Carvedilol Using Semi Synthetic and Natural Polymers to Enhance the Oral Bioavailability

Preparation, in vitro and in vivo Characteristics of Floating in situ Gel of Carvedilol Using Semi Synthetic and Natural Polymers to Enhance the Oral Bioavailability

Structuring gelatin methacryloyl - dextran hydrogels and microgels under shear.

Gelatin methacryloyl (GelMA) is a widely used semi-synthetic polymer for a variety of bioapplications. However, the development of versatile GelMA hydrogels requires tuning of their microstructure. Herein, we report the possibility of preparing hydrogels with various microstructures under shear from an aqueous two-phase system (ATPS) consisting of GelMA and dextran. The influence of an applied preshear on dextran/GelMA droplets and bicontinuous systems is investigated by rheology that allows the application of a constant shear and is immediately followed by in situ UV-curing of the GelMA-rich phase. The microstructure of the resulting hydrogels is examined by confocal laser scanning microscopy (CLSM). The results show that the GelMA string phase and GelMA hydrogels with aligned bands can be formed depending on the concentration of dextran and the applied preshear. The influence of the pH of the ATPS is investigated and demonstrates the formation of multiple emulsions upon decreasing the charge density of GelMA. The preshearing of multiple emulsions, following gelation, leads to the formation of porous GelMA microgels. The diversity of the formed structures highlights the application potential of preshearing ATPS in the development of functional soft materials.

A Comprehensive Review on Role of Polymers in Transdermal Drug Delivery System

Transdermal drug delivery system has been emerged as one of the most effective controlled drug release system in topical formulation as it doesn’t undergo first pass metabolism in liver and can be directly absorbed into the systemic circulation. Polymers are used in TDDS as to increase its effectiveness in the control release of drug from the transdermal patch. Use of polymers in the TDDS has decreased the control release rate of drug from the patch. Use of polymers in combination has given more effectiveness of the drug release. This article gives a quality of information about the use of polymers in the Transdermal drug delivery system. Polymers also help in the adhesive nature of the drug to the skin and promote more extent of drug release from the dosage form. An advance in the use and amount of polymers used in the TDDS has been increased recently. This article provides the information about the use of Natural, semisynthetic and synthetic polymers in the TDDS. Use of natural polymers has been showed more impact in the TDDS and their use has showed fewer side effects like irritation, allergy, and this has been increased patient compliance and more effectiveness in drug release. Semisynthetic and synthetic polymers has been developed and used excessively in the TDDS for effective control release of the drug from the patches. A transdermal patch is defined as medicated adhesive patch which is placed above the skin to deliver a pre-determined dose of medication via skin with a predetermined rate of release to reach into the bloodstream. Article Details

Suspended and deposited microplastics in the coastal atmosphere of southwest England

Atmospheric microplastics (MPs) have been sampled from coastal southwest England during twelve periods over a 42-day timeframe in late autumn. MPs were dominated by fibres, with foams, fragments and pellets also observed. The majority of fibres were identified as the semisynthetic polymer, rayon, while other shapes were dominated by various petroleum-based thermoplastics (including polyvinyl acetate, polyvinyl alcohol, polyamide and polyester) and paints. MP concentrations suspended in air ranged from 0.016 to 0.238 items per m3 but displayed no clear dependence on wind speed or direction. Total depositional fluxes ranged from 0.47 to 3.30 m−2 h−1 and showed no clear dependence on wind conditions or electrical conductivity of precipitation (as a measure of maritime influence). However, the concentration of deposited MPs in rainwater was inversely related to rainfall volume, suggesting that incipient precipitation acts to efficiently washout microplastics. A comparison of deposited and suspended MPs by size, shape and polymer type suggests that larger fibres constructed of rayon, polyamide and acrylic are preferentially removed from the atmosphere relative to smaller, non-fibrous MPs and particles constructed of polyester. A quantitative comparison of deposited and suspended MPs provided estimates of location- and environment-specific net settling velocities of between about 7 and 180 m h−1 and corresponding residence times for an air column of 5000 m of between about 30 and 700 h. The findings of the study contribute to an improved understanding of the occurrence, transport and deposition of MPs in the atmosphere more generally.

Biodegradation of LDPE (low density polyethylene) using bacterial strain

The applications of polyethylene are enormous and they are popular because of their relatively low cost, lack of difficulty in manufacture, adaptability and durability. In the past decade, the increase in the utilization of plastics and the accumulation of polyethylene in the environment all around the globe has drawn the attention of environmentalists and scientists. The plastic materials are commonly derived from petrochemicals extracted from coal and natural gas. They are produced in a wide range in synthetic, semi synthetic organic polymers. The degradation of LDPE film was determined by residual dry weight loss of the LDPE films. The potent strain showed 42.5% degradation ability in 90 d. Degradation of LDPE results in the breakdown of the polymer backbone chain producing CO2 which was checked by gravimetric analysis. Enzyme kinetic studies showed the production of three ligninolytic extracellular enzymes- lignin, laccase and manganese peroxidase by bacterial strain AJ01 in LDPE degradation. Degradation of LDPE strips followed first order kinetics model with a rate constant (R2) of 0.9783 d-1. Estimation of protein from post treated LDPE using bacterial isolate showed a total concentration of 0.440mg/0.1mL and 0.703mg/0.2mL. LDPE degradation was confirmed by using analytical techniques such as SEM which showed changes in the surface topology of LDPE strips and FTIR analysis showed changes in complex chemical structure of LDPE post 90 d of degradation using microorganisms thereby reducing carbonyl index (CI) value.

Microplastics in the Arctic: a transect through the Barents Sea

Globally, the abundance of microplastics in our oceans is increasing, including within the remote locations of the polar regions. The Barents Sea, which adjoins the Arctic Ocean, is an area of high primary productivity that, owing to the convergence of regional currents, has been mooted as a potential sixth ocean gyre that may coalesce high concentrations of plastic debris. This study aimed to explore data collected from large volume samples of sub-surface water collected from transects through the Barents Sea to quantify and characterise microplastics in this region, with a focus on potential impacts to zooplankton. Overall, the mean microplastic abundance in the Barents Sea was 0.011 microplastics m-3 (range: 0.007 – 0.015 m-3). Microplastics were found in higher abundances nearer land mass at the southern end of the transect and northwards towards the ice edge, recording 0.015 microplastics m-3 during both transect legs. Microplastics were predominantly fibrous (92.1%) and typically blue (79%) or red (17%) in colour. A range of polymers were identified including polyester (3.8%), copolymer blends (2.7%), elastomers (7.1%) and acrylics (10.6%), however semi-synthetic polymers dominated, comprising 74.4% of particles found. Higher microplastic concentrations in the northernmost transect may stem from melting sea-ice, while the higher concentrations in the southernmost transect likely derive from the long-range transport of microplastics via currents from Europe.

Preparation of drug-loaded chitosan microspheres repair materials.

With the development of society and the progress of science and technology, microspheres, as a new polymer material, have been applied to all aspects of human beings. Microspheres can play a huge role in food safety, electronic technology, sewage treatment, biomedicine, etc., and are non-toxic or harmless. There are three main types of substrates for the preparation of microspheres: natural polymers, semi-synthetic polymer materials, and synthetic polymer materials. In this study, the inorganic material kaolin was modified by the emulsification-crosslinking method with chitosan and composite microspheres with large interlayer spacing were prepared, which were characterized by Fourier Transform Ioncyclotron Resonancel (FTIR) analysis and Scanning Electron Microscope (SEM). The prepared kaolin/chitosan microspheres were then placed in different amounts of aspirin and the optimal dose was investigated by encapsulation efficiency and drug loading rate. The drug release rate of 0.5 h, 1 h, 1.5 h, 2 h, 4 h, 6 h, and 12 h was then determined by simulating the human colon to determine the performance of the sustained-release drug. The experimental results showed that after the prepared composite microspheres were loaded with aspirin drug, we got the optimal dosage of 0.1 g by discussing the encapsulation efficiency and drug loading rate of the drug-loaded microspheres, and the encapsulation efficiency reached 80.80%, while the drug loading rate was 24.40%, the drug release capacity reached about 83% in about 12 hours. The research shows that the kaolin/chitosan drug-loaded microspheres prepared by the emulsification and cross-linking method are excellent drug-loading materials.

Research Progress of Polymer Biomaterials as Scaffolds for Corneal Endothelium Tissue Engineering.

Nowadays, treating corneal diseases arising from injury to the corneal endothelium necessitates donor tissue, but these corneas are extremely scarce. As a result, researchers are dedicating significant efforts to exploring alternative approaches that do not rely on donor tissues. Among these, creating a tissue-engineered scaffold on which corneal endothelial cells can be transplanted holds particular fascination. Numerous functional materials, encompassing natural, semi-synthetic, and synthetic polymers, have already been studied in this regard. In this review, we present a comprehensive overview of recent advancements in using polymer biomaterials as scaffolds for corneal endothelium tissue engineering. Initially, we analyze and present the key properties necessary for an effective corneal endothelial implant utilizing polymer biomaterials. Subsequently, we focus on various emerging biomaterials as scaffolds for corneal endothelium tissue engineering. We discuss their modifications (including natural and synthetic composites) and analyze the effect of micro- and nano-topological morphology on corneal endothelial scaffolds. Lastly, we highlight the challenges and prospects of these materials in corneal endothelium tissue engineering.

Tableting-induced mechanochemical matrix crosslinking: Towards non-disintegrating chitosan-based sustained delivery tablets

BackgroundMechanochemistry involves the application of mechanical force to induce chemical changes in the material solid state. Mechanochemistry promises to overcome many drawbacks in pharmaceutical formulation. Chitosan (CS), a semisynthetic polymer obtained by N-deacetylation of chitin, has attracted attention in various biomedical and pharmaceutical applications. MethodsCS was grafted with 2,4-dichlorophenoxyacetic acid (2,4-D), a significantly hydrophobic and safe substituent, to promote facile adsorption of CO2. Physical mixtures and corresponding tablets comprised of model drugs and CS-2,4-D were prepared and characterized by DSC, XRD, and IR, and were compared with pure drugs and their mixtures with unmodified CS. Tensile strength and drug-release profiles of CS-2,4-D tablets were evaluated and compared with counterparts prepared from unmodified CS. ResultsAdsorbed CO2 promoted the formation of powerful and extensive carbamate crosslinks within CS-2,4-D upon mechanochemical stress induced by mixing the new polymer with model drugs followed by tableting. Corresponding tablets showed increased tensile strength, sustained drug release and resistance to disintegration over 72 h of exposure to dissolution media. MTT bioassay indicated CS-2,4-D to be less cytotoxic than unmodified CS. Conclusionsthe current study provided a proof-of-principle on tableting mediated mechanochemical matrix crosslinking.