Semi-rational Protein Engineering Research Articles

Chemoenzymatic Synthesis of 2-Aryl Thiazolines from 4-Hydroxybenzaldehydes Using Vanillyl Alcohol Oxidases.

Nitrogen heterocycles are commonly found in bioactive natural products and drugs. However, the biocatalytic tools for nitrogen heterocycle synthesis are limited. Herein, we report the discovery of vanillyl alcohol oxidases (VAOs) as efficient biocatalysts for the one-pot synthesis of 2-aryl thiazolines from various 4-hydroxybenzaldehydes and aminothiols. The wild-type biocatalyst features a broad scope of 4-hydroxybenzaldehydes. Though the scope of aminothiols is limited, it could be improved via semi-rational protein engineering, generating a variant to produce previously inaccessible cysteine-derived bioactive 2-aryl thiazolines using the wild-type VAO. Benefiting from the derivatizable functional groups in the enzymatic products, we further chemically modified these products to expand the chemical space, offering a new chemoenzymatic strategy for the green and efficient synthesis of structurally diverse 2-aryl-thiazoline derivatives to prompt their use in drug discovery and catalysis.

Production of 14α-Hydroxy Progesterone Using a Steroidal Hydroxylase from Cochliobolus lunatus Expressed in Escherichia coli

Steroids with hydroxylation at C14 are drawing increased attention because of their diverse biological activities and applications. P-450lun from Cochliobolus lunatus is the first fungal cytochrome P450 reported to have 14α-hydroxylase activity. Studies have shown that P-450lun catalyzes the hydroxylation of progesterone (PROG) at C14α with low regiospecificity and activity. To improve its regiospecificity and activity for PROG, truncated forms of P-450lun and its cognate redox partner CPRlun were functionally co-expressed in Escherichia coli. Then, a semi-rational protein engineering approach was applied to P-450lun, resulting in a double-site mutant E109A/F297W with enhanced 14α-position selectivity for PROG compared with the wild-type P-450lun (97% vs. 28%). Protein structure analysis revealed that the F297W substitution can hinder the binding pose for 11β-hydroxylation product formation. Finally, whole-cell catalysis was optimized, and the final titer of 14α-OH-PROG reached 16.0 mg/L. This is the first report where a fungal 14α-hydroxylase was functionally expressed in Escherichia coli. The steroid hydroxylation system obtained in this study can serve as a basis for the synthesis of 14α-hydroxylated PROG and the rapid evolution of eukaryotic cytochrome P-450lun.

Enzymatic Peptide and Protein Bromination: The BromoTrp Tag.

Bio-orthogonal reactions for modification of proteins and unprotected peptides are of high value in chemical biology. The combination of enzymatic halogenation with transition metal-catalyzed cross-coupling provides a feasible approach for the modification of proteins and unprotected peptides. By a semirational protein engineering approach, variants of the tryptophan 6-halogenase Thal were identified that enable efficient bromination of peptides with a C-terminal tryptophan residue. The substrate scope was explored using di-, tri-, and tetrapeptide arrays, leading to the identification of an optimized peptide tag we named BromoTrp tag. This tag was introduced into three model proteins. Preparative scale post-translational bromination was possible with only a single cultivation and purification step using the brominating E. coli coexpression system Brocoli. Palladium-catalyzed Suzuki-Miyaura cross-coupling of the bromoarene was achieved with Pd nanoparticle catalysts at 37 °C, highlighting the rich potential of this strategy for bio-orthogonal functionalization and conjugation.

Efficient polyethylene terephthalate degradation at moderate temperature: a protein engineering study of LC-cutinase highlights the key role of residue 243.

Enzymatic degradation of poly(ethylene terephthalate) (PET) is becoming a reality because of the identification of novel PET-hydrolysing enzymes (PHEs) and the engineering of evolved enzyme variants. Here, improved variants of leaf-branch compost cutinase (LCC), a thermostable enzyme isolated by a metagenomic approach, were generated by a semi-rational protein engineering approach. Starting from a deleted LCC form lacking the secretion signal (ΔLCC), single and double variants possessing a higher activity on PET were isolated. The single-point F243T ΔLCC variant partially (~ 67%) depolymerized amorphous PET film producing ~ 21.9 mm of products after 27 h of reaction at 72 °C. The S101N/F243T ΔLCC double variant reached a further increase in activity on PET. Notably, for both single and double variants the highest conversion yield was obtained at 55 °C. Kinetics studies and molecular dynamics simulations support that a slight decreased affinity for PET is responsible for the superior degradation performance of the S101N/F243T variant and that this stems from a slightly higher flexibility of the active site region close to position 243. Furthermore, our findings question the need for a high reaction temperature for PET degradation, at least for LCC: at ≥ 70 °C, the conversion of amorphous PET into a more crystalline polymer, resistant to enzymatic hydrolysis, is favoured. The evolved S101N/F243T ΔLCC variant is able to depolymerize fully 1.3 g of untreated postconsumer PET waste in ≤ 3 days at 55 °C (using 1.25 mg of enzyme only), this making PET enzymatic degradation by engineering LCC a more ecofriendly and sustainable process.

Enhanced production of amyrin in Yarrowia lipolytica using a combinatorial protein and metabolic engineering approach

BackgroundAmyrin is an important triterpenoid and precursor to a wide range of cosmetic, pharmaceutical and nutraceutical products. In this study, we metabolically engineered the oleaginous yeast, Yarrowia lipolytica to produce α- and β-amyrin on simple sugar and waste cooking oil.ResultsWe first validated the in vivo enzymatic activity of a multi-functional amyrin synthase (CrMAS) from Catharanthus roseus, by expressing its codon-optimized gene in Y. lipolytica and assayed for amyrins. To increase yield, prevailing genes in the mevalonate pathway, namely HMG1, ERG20, ERG9 and ERG1, were overexpressed singly and in combination to direct flux towards amyrin biosynthesis. By means of a semi-rational protein engineering approach, we augmented the catalytic activity of CrMAS and attained ~ 10-folds higher production level on glucose. When applied together, protein engineering with enhanced precursor supplies resulted in more than 20-folds increase in total amyrins. We also investigated the effects of different fermentation conditions in flask cultures, including temperature, volumetric oxygen mass transfer coefficient and carbon source types. The optimized fermentation condition attained titers of at least 100 mg/L α-amyrin and 20 mg/L β-amyrin.ConclusionsThe design workflow demonstrated herein is simple and remarkably effective in amplifying triterpenoid biosynthesis in the yeast Y. lipolytica.

Semi-rational protein engineering of a novel ene-reductase from Galdieria sulphuraria for asymmetric reduction of (R)-carvone and ketoisophorone.

Asymmetric reduction of (R)-carvone and ketoisophorone by an engineered ene-reductase from Galdieria sulphuraria (GsOYE) combined with glucose dehydrogenase for NADPH regeneration were studied. A semi-rational protein engineering was used to enhance the activity and selectivity of GsOYE. Upon the sequence alignment and molecular docking results, two amino acid residues at positions 66 and 270 were selected as saturation mutation sites. Finally, a single substitution variant of GsOYE-N270A with complete conversion (100%) and diastereoselectivity (dep >99%) for reduction of (R)-carvone and a double substitution variant GsOYE-Y66P/N270H with improved stereoselectivity for reduction of ketoisophorone were obtained.

Screening and Remodeling of Enone Oxidoreductase for High Production of 2(or 5)-Ethyl-5(or 2)-methyl-4-hydroxy-3(2H)-Furanone in Saccharomyces Cerevisiae

Owing to its unique fragrance, 4-hydroxy-2(or 5)-ethyl-5(or 2)-methyl-3(2H)-furanone (HEMF) is widely used as a food flavoring agent and has high demand. Enone oxidoreductase is a vital enzyme involved in HEMF production. In this study, an enone oxidoreductase from Naumovozyma dairenensis CBS 421 (NDEO) was used for HEMF production for the first time. The mutant NDEOT183W,K290W was obtained through semirational protein engineering, which increased the HEMF yield by 75.2%. Finally, the engineered strain BM4 produced the highest HEMF yield, 194.42 mg L-1 in 132 h. Our study revealed that HEMF production can be improved in Saccharomyces cerevisiae and that this is an efficient method to improve the activity of enone oxidoreductase, which is important for the industrial synthesis of furanone.

HyperXpress: Rapid Single Vessel DNA Assembly and Protein Production in Microliterscale

Rapid prototyping of biological functions has the common aim of generating, screening, and selecting variant libraries as quickly as possible. This approach is now to be extended by the HyperXpress workflow, which connects ligase cycling reaction for DNA assembly, multiply-primed rolling circle amplification for signal amplification, and cell-free protein synthesis to a single vessel reaction in the lower µl scale. After substantial optimization of the method a proof-of-principle demonstrating the high flexibility of HyperXpress for semi-rational protein engineering by expanding, reducing, and replacing β-strands of three different green fluorescent proteins is described. These single-day experiments resulted in six functional, new-to-nature GFP prototypes.

Semi-rational protein engineering of a novel esterase from Bacillus aryabhattai (BaCE) for resolution of (R,S)-ethyl indoline-2-carboxylate to prepare (S)-indoline-2-carboxylic acid

A gene encoding an esterase from Bacillus aryabhattai (BaCE) was identified, synthesized and efficiently expressed in the Escherichia coli system. A semi-rational protein engineering was applied to further improve the enzyme’s enantioselectivity. Under the guidance of the molecular docking result, a single mutant BaCE-L86Q and a double mutant BaCE-L86Q/G284E were obtained, with its Emax value 6.4 times and 13.9 times of the wild-type BaCE, respectively. The recombinant BaCEs were purified and characterized. The overwhelming E value demonstrated that BaCE-L86Q/G284E was a promising biocatalyst for the biological resolution to prepare (S)-indoline-2-carboxylic acid.

An Efficient Protein Evolution Workflow for the Improvement of Bacterial PET Hydrolyzing Enzymes.

Enzymatic degradation is a promising green approach to bioremediation and recycling of the polymer poly(ethylene terephthalate) (PET). In the past few years, several PET-hydrolysing enzymes (PHEs) have been discovered, and new variants have been evolved by protein engineering. Here, we report on a straightforward workflow employing semi-rational protein engineering combined to a high-throughput screening of variant libraries for their activity on PET nanoparticles. Using this approach, starting from the double variant W159H/S238F of Ideonella sakaiensis 201-F6 PETase, the W159H/F238A-ΔIsPET variant, possessing a higher hydrolytic activity on PET, was identified. This variant was stabilized by introducing two additional known substitutions (S121E and D186H) generating the TS-ΔIsPET variant. By using 0.1 mg mL−1 of TS-ΔIsPET, ~10.6 mM of degradation products were produced in 2 days from 9 mg mL−1 PET microparticles (~26% depolymerization yield). Indeed, TS-ΔIsPET allowed a massive degradation of PET nanoparticles (>80% depolymerization yield) in 1.5 h using only 20 μg of enzyme mL−1. The rationale underlying the effect on the catalytic parameters due to the F238A substitution was studied by enzymatic investigation and molecular dynamics/docking analysis. The present workflow is a well-suited protocol for the evolution of PHEs to help generate an efficient enzymatic toolbox for polyester degradation.

Ancestral L-amino acid oxidases for deracemization and stereoinversion of amino acids

L-amino acid oxidases (LAAOs) can be applied to convert racemic amino acids to D-isomers, which are potential precursors of pharmaceuticals. However, this application is hampered by the lack of available stable and structure-determined LAAOs. In this study, we attempt to address this limitation by utilizing two ancestral LAAOs: AncLAAO-N4 and AncLAAO-N5. AncLAAO-N4 has the highest thermal and temporal stabilities among the designed LAAOs that can be used for deracemization and stereoinversion. AncLAAO-N5 can provide X-ray crystal structures, which are helpful to reveal substrate recognition and reaction mechanisms of LAAOs at the molecular level. Next, we attempted to improve activity of AncLAAO-N4 toward L-Val through a semi-rational protein engineering method. Three variants with enhanced activity toward L-Val were obtained. Taken together, we believe that the activity and substrate selectivity of AncLAAOs give them the potential to be key enzymes in various chemoenzymatic reactions.

MEosBrite Are Bright Variants of mEos3.2 Developed by Semirational Protein Engineering.

mEos3.2 is a photoconvertible fluorescence protein with comparatively low brightness, which limits its application in live Super resolution microscopy. To address this issue, we have used semi-rational protein engineering to develop mEosBrite, a new class of improved brightness variants. The improvement in the brightness was confirmed by expression in E.coli as well as mammalian cell lines. Furthermore, biophysical characterization suggests that all the three mEosBrite variant proteins display higher quantum yield, truly monomeric form, less cytotoxicity and lower protein aggregation as compared to the wild type mEos3.2 protein. Most importantly, because of their high photoconversion efficiency mEosBrite variants could be an excellent tool for single-molecule and intensity fluctuation based super-resolution microscopy.

Heterologous overexpression of a novel halohydrin dehalogenase from Pseudomonas pohangensis and modification of its enantioselectivity by semi-rational protein engineering

A gene encoding a halohydrin dehalogenase from Pseudomonas pohangensis (PpHHDH) was identified, synthesized and expressed in Escherichia coli. Subsequently, we used protein engineering to enhance the enzyme's enantioselectivity. We created two enantiocomplementary HHDH mutants, N160L and Q159L, which exhibited higher S- and R-selectivity toward PGE, respectively. The exchange of Leu at 159 for Gln led to a 2.3-fold increase in enantioselectivity (E-value of 22.2) compared to the wild-type. In addition, the N160L mutant displayed an inverted enantioselectivity (from ER = 9.8 to ES = 21.6) toward PGE. The wild-type PpHHDH and its variants were purified and characterized. They all displayed maximum activity at pH 7.5. The optimum temperature of mutant Q159L and N160L was increased from 35 °C to 40 °C. The wild-type PpHHDH and N160L mutant had good pH stability at pH 5.0–7.5, and Q159L showed an even wider range of pH tolerance, from pH 4.5 to pH 8.0. The mutants N160L and Q159L showed slightly better thermostability than wild-type PpHHDH. For most tested substrates, the two variants showed higher enantioselectivity. These findings further confirmed the importance of amino acid residues at positions 159 and 160 for the enantioselectivity of PpHHDH.

Genome mining integrating semi-rational protein engineering and nanoreactor design: roadmap for a robust biocatalyst for industrial resolution of Vince lactam.

Biomanufacturing of chemicals using biocatalysts is an attractive strategy for the production of valuable pharmaceuticals since it is usually more economical and has a much-reduced environmental impact. However, there are often challenges such as their thermal instability that should be overcome before a newly discovered enzyme is eventually translated into industrial processes. In this work, we describe a roadmap for the development of a robust catalyst for industrial resolution of Vince lactam, a key intermediate for the synthesis of carbocyclic-nucleoside-related pharmaceuticals. By a genome mining strategy, a new (+)-γ-lactamase (MiteL) from Microbacterium testaceum was successfully discovered and biochemically characterized. In vitro studies showed that the enzyme exhibited high activity but poor enantioselectivity (E = 6.3 ± 0.2) toward racemic Vince lactam, and thus, it is not suitable for industrial applications. Based on structural modeling and docking studies, a semi-rational engineering strategy combined with an efficient screening method was then applied to improve the enantioselectivity of MiteL. Several mutants with significant shifting stereoselectivity toward (-)-γ-lactam were obtained by site-saturation mutagenesis. Synergy effects led to the final mutant F14D/Q114R/M117L, which enabled efficient acquisition of (-)-γ-lactam with a high E value (> 200). The mutant was biochemically characterized, and the docking studies suggested a plausible mechanism for its improved selectivity. Finally, a sunflower-like nanoreactor was successfully constructed to improve the mutant's robustness via protein supramolecular self-assembly. Thus, the synergism between semi-rational protein engineering and self-assembling immobilization enabled construction of a nanoreactor with superior properties, which can be used for resolution of Vince lactam in large scale.

Chemo- and Regioselective Dihydroxylation of Benzene to Hydroquinone Enabled by Engineered Cytochrome P450 Monooxygenase.

Hydroquinone (HQ) is produced commercially from benzene by multi-step Hock-type processes with equivalent amounts of acetone as side-product. We describe an efficient biocatalytic alternative using the cytochrome P450-BM3 monooxygenase. Since the wildtype enzyme does not accept benzene, a semi-rational protein engineering strategy was developed. Highly active mutants were obtained which transform benzene in a one-pot sequence first into phenol and then regioselectively into HQ without any overoxidation. A computational study shows that the chemoselective oxidation of phenol by the P450-BM3 variant A82F/A328F leads to the regioselective formation of an epoxide intermediate at the C3=C4 double bond, which departs from the binding pocket and then undergoes fragmentation in aqueous medium with exclusive formation of HQ. As a practical application, an E. coli designer cell system was constructed, which enables the cascade transformation of benzene into the natural product arbutin, which has anti-inflammatory and anti-bacterial activities.

Significant improvement of the nitrilase activity by semi-rational protein engineering and its application in the production of iminodiacetic acid

Iminodiacetic acid (IDA) is widely used as an intermediate in the manufacturing of chelating agents, glyphosate herbicides and surfactants. To improve activity and tolerance to the substrate for IDA production, Acidovorax facilis nitrilase was selected for further modification by the gene site saturation mutagenesis method. After screened by a two-step screening method, the best mutant (Mut-F168V/T201N/S192F/M191T/F192S) was selected. Compared to the wild-type nitrilase, Mut-F168V/T201N/S192F/M191T/F192S showed 136% improvement in specific activity. Co2+ stimulated nitrilase activity, whereas Cu2+, Zn2+ and Tween 80 showed a strong inhibitory effect. The Vmax and kcat of Mut-F168V/T201N/S192F/M191T/F192S were enhanced 1.23 and 1.23-fold, while the Km was decreased 1.53-fold. The yield of Mut-F168V/T201N/S192F/M191T/F192S with 453.2 mM of IDA reached 71.9% in 5 h when 630 mM iminodiacetonitrile was used as substrate. This study indicated that mutant nitrilase obtained in this study is promising in applications for the upscale production of IDAN.

Structure-Based Engineering of Steroidogenic CYP260A1 for Stereo- and Regioselective Hydroxylation of Progesterone

The production of regio- and stereoselectively hydroxylated steroids is of high pharmaceutical interest and can be achieved by cytochrome P450-based biocatalysts. CYP260A1 from Sorangium cellulosum strain So ce56 catalyzes hydroxylation of C19 or C21 steroids at the very unique 1α-position. However, the conversion of progesterone (PROG) by CYP260A1 is very unselective. In order to improve its selectivity we applied a semirational protein engineering approach, resulting in two different, highly regio- and stereoselective mutants by replacing a single serine residue (S276) of the substrate recognition site 5 with an asparagine or isoleucine. The S276N mutant converted PROG predominantly into 1α-hydroxy-PROG, while the S276I mutant led to 17α-hydroxy-PROG. We solved the high-resolution crystal structures of the PROG-bound S276N and S276I mutants, which revealed two different binding modes of PROG in the active site. The orientations were consistent with the exclusive 1α- (pro-1α binding mode) and 17α-hydroxylation (pro-17α-binding mode) of S276N and S276I, respectively. We observed that water-mediated hydrogen bonds contribute to the stabilization of the polar C3 and C17 substituents of PROG. Both binding modes of PROG may be stabilized in the wild-type enzyme. The change in regioselectivity is mainly driven by destabilizing the alternative binding mode due to steric hindrance and hydrogen bond disruption, caused by the mutations of Ser276. Thus, for the first time, the change in the selectivity of cytochrome P450-mediated steroid hydroxylation created by rational mutagenesis can be explained by the obtained 3D structures of the substrate-bound mutants, providing the basis for further experiments to engineer the biocatalyst toward novel steroid hydroxylation positions.

Correlated positions in protein evolution and engineering.

Statistical analysis of a protein multiple sequence alignment can reveal groups of positions that undergo interdependent mutations throughout evolution. At these so-called correlated positions, only certain combinations of amino acids appear to be viable for maintaining proper folding, stability, catalytic activity or specificity. Therefore, it is often speculated that they could be interesting guides for semi-rational protein engineering purposes. Because they are a fingerprint from protein evolution, their analysis may provide valuable insight into a protein's structure or function and furthermore, they may also be suitable target positions for mutagenesis. Unfortunately, little is currently known about the properties of these correlation networks and how they should be used in practice. This review summarises the recent findings, opportunities and pitfalls of the concept.

Painting with Rainbows: Patterning Light in Space, Time, and Wavelength for Multiphoton Optogenetic Sensing and Control.

Photons are a fascinating reagent, flowing and reacting quite differently compared to more massive and less ephemeral particles of matter. The optogenetic palette comprises an ever growing set of light-responsive proteins, which open the possibility of using light to perturb and to measure biological processes with great precision in space and time. Yet there are limits on what light can achieve. Diffraction limits the smallest features, and scattering in tissue limits the largest. Photobleaching, diffusion of photogenerated products, and optical crosstalk between overlapping absorption spectra further muddy the optogenetic picture, particularly when one wants to use multiple optogenetic tools simultaneously. But these obstacles are surmountable. Most light-responsive proteins and small molecules undergo more than one light-driven transition, often with different action spectra and kinetics. By overlapping multiple laser beams, carefully patterned in space, time, and wavelength, one can steer molecules into fluorescent or nonfluorescent, active or inactive conformations. By doing so, one can often circumvent the limitations of simple one-photon excitation and achieve new imaging and stimulation capabilities. These include subdiffraction spatial resolution, optical sectioning, robustness to light scattering, and multiplexing of more channels than can be achieved with simple one-photon excitation. The microbial rhodopsins are a particularly rich substrate for this type of multiphoton optical control. The natural diversity of these proteins presents a huge range of starting materials. The spectroscopy and photocycles of microbial rhodopsins are relatively well understood, providing states with absorption maxima across the visible spectrum, which can be accessed on experimentally convenient time scales. A long history of mutational studies in microbial rhodopsins allows semirational protein engineering. Mutants of Archaerhodopsin 3 (Arch) come in all the colors of the rainbow. In a solution of purified Arch-eGFP, a focused green laser excites eGFP fluorescence throughout the laser path, while a focused red laser excites fluorescence of Arch only near the focus, indicative of multiphoton fluorescence. This nonlinearity occurs at a laser intensity ∼1010-fold lower than in conventional two-photon microscopy! The mutant Arch(D95H) shows photoswitchable optical bistability. In a lawn of E. coli expressing this mutant, illumination with patterned blue light converts the molecule into a state that is fluorescent. Illumination with red light excites this fluorescence, and gradually resets the molecules back to the non-fluorescent state. This review describes the new types of molecular logic that can be implemented with multi-photon control of microbial rhodopsins, from whole-brain activity mapping to measurements of absolute membrane voltage. Part of our goal in this Account is to describe recent work in nonlinear optogenetics, but we also present a variety of interesting things one could do if only the right optogenetic molecules were available. This latter component is intended to inspire future spectroscopic, protein discovery, and protein engineering work.

Structure-based fragment shuffling of two fungal phytases for combination of desirable properties

Aspergillus niger NRRL 3135 phytase (Anp) and Aspergillus fumigatus ATCC 13073 phytase (Afp) are quite different but mutually complementary in many properties. A semi-rational protein engineering strategy based on 3D structure and sequence alignment was used to take advantage of the desirable characteristics of both enzymes. Each phytase was divided into seven fragments, including regions I–VII (I, 1–47; II, 59–133; III, 139–172; IV, 178–237; V, 246–329; VI338–381; VII, 404–444). The equivalent regions were swapped to construct an array of chimeras. Among the functional chimeras expressed in the yeast Pichia pastoris, novel phytases with combinations of the most desirable properties, including heat-resistance, were obtained. Correlations of individual regions with detailed differences were established by systematic evaluation of the substitutions. Regions II and VI contributed to the difference in specific activity at pH 5.0. Regions IV and V of Anp fully accounted for its second pH optimum at pH 2.5. Most influences of substitutions were additive, except those of regions V and VI. Exchanging both regions led to different impacts upon K m and activity at ∼pH 4.0 compared with the replacement of either.