Self-compacting Concrete Mixes Research Articles

Characteristic evaluation and environmental validation of self-compacting concrete containing sandstone slurry waste for sustainable usage.

This study aims to understand the impact of concrete ingredients on the environment. To analyze the effect of, three significant indexes have been taken into consideration, which are embodied carbon dioxide index (e-CO2), embodied energy consumption (e-energy), and embodied resource consumption (e-resource) index. The life cycle assessment (LCA) methodology has considered veto comprehending the probable application of sandstone waste in the form of a slurry (Sslurry) and powder (Spowder) for the development of self-compacting concrete (SCC). This study can be proven beneficial to evaluate the potential adverse effects from environmental and energy perspectives. One reference mix and eighteen design mixes of SCC have been designed and developed to perform an experimental program. An environmental impact comparison of the "hybrid" SCC was performed using the OpenLCA life cycle analysis software with Ecoinvent LCIA methods. The outcomes of this experimental program reveal that the partial replacement of pozzolana Portland cement (PPC) with Sslurry can reduce e-CO2 emission along with the e-energy and e-resource parameters. When Spowder was used as the partial substitution of fine aggregate (FA), only the e-resource index decreased, and e-CO2 and e-energy increased. Minimalist impact on the environment has been noticed when SCC is prepared with Sslurry and Spowder. A detailed LCA analysis study justifies the utilization of Sslurry and Spowder in SCC, which exhibits encouraging results concerning strength and quality. Hence, it was observed that Sslurry and Spowder in developing green and sustainable SCC with moderate strength characteristics are beneficial from an environmental impact perspective.

Rheological properties of high-performance SCC using recycled marble powder

Due to the impacts of cement manufacturing and depletion of the natural aggregates for concrete production, recycling of construction and demolition waste materials has become an alternative replacement to natural materials that lower their consumption and satisfy the environment. One of these alternatives is replacing cement with recycled materials from marble, ceramic, granite, and concrete wastes or even replacing the coarse aggregate with crushed marble and other stone wastes. Marble, granite, and natural stone wastes rapidly increase each year due to unmanaged waste disposal processes and the incremental increase in construction potential. Marble slurry, which comes from washing and cleaning marble surfaces, shows a filler effect by giving the concrete a denser and homogenous structure. This study evaluates the marble filler effects on the rheology in the fresh state of self-compacting concrete (SCC) through four SCC mixes by incorporating 10% marble powder (MP) and 33% fly ash (FA) as a partial ordinary Portland cement (OPC) replacement. Tests on paste and mortar were conducted to assess the suitability of the marble dosage on the water content and the superplasticizer amount. Spread flow and V-funnel tests were assessed. The results showed that mixes with MP required additional mixing water to ensure the same workability. Regardless of the high viscosity and air content, the overall developed marble SCC mixes reduced the cement quantity by up to 11% and provided excellent rheological properties like that of the reference mix. Besides the economic benefits, this transformation of waste to valuable materials involves environmental advantages and sustainability promotion.

An Experimental Study on Self Compacting Concrete with Partial Replacement of Cement by Silica Fume and Crumb Rubber

Abstract: Self-compacting concrete (SCC) is a type of concrete that can flow and consolidate under its own weight without the need for vibration. SCC has many advantages such as improved workability, durability, surface quality, and reduced noise and labour. However, SCC also requires a high amount of cement and fine materials, which increases the cost and environmental impact of concrete production. Therefore, the use of supplementary cementitious materials such as silica fume and crumb rubber is beneficial to reduce the cement content and enhance the properties of SCC. This study aims to explore the effects of mixing silica fume and crumb rubber on the fresh and hardened properties of SCC. This involves the preparation of various concrete mixes with different percentages of cement replaced by silica fume and crumb rubber. Through a series of experiments, we evaluate the fresh and hardened properties of the SCC mixes, fresh properties such as workability, passing ability, and filling ability, while hardened properties including compressive strength, tensile strength, and flexural strength. The result obtained from these tests are compared with conventional concrete of M30 grade od concrete specimens. Hence the use of silica fume and crumb rubber leads to reduction in cement quantity for construction purpose and its use should be promoted for better performance as well as environmental sustainability.

Influence of recycled steel fiber on the properties of self-compacting concrete with high fly ash content


 
 
 The recycled steel fibers from waste steel cables have properties suitable for enhancing the load-bearing capacity, impact resistance, and shrinkage reduction of Self-Compacting Concrete (SCC). The use of a high content of fly ash in SCC reduces production costs and is environment friendly by minimizing the amount of cement in the mix. This article presents the experimental research results on the influence of the content of recycled steel fibers on the properties of high-fly-ash SCC. The research utilized recycled steel fibers from elevator steel cables with volume percentages of 0%, 0.5%, 1% and 1.5% respectively in SCC, with a fly ash content in the SCC mix of 50% by volume of powder. The evaluated properties included workability, plastic shrinkage, drying shrinkage compressive strength, and tensile strength. The results indicate that using recycled steel fibers with a maximum content of 1% enables the production of SCC that meets European standards for workability. In addition, when comparing SCC with 0.5% and 1% recycled steel fiber content to control SCC samples (without steel fibers), the compressive strength of SCC increased by 5.04% and 7.56% respectively, the tensile strength increased by 2.99% and 5.97% respectively, plastic shrinkage decreased by 27.34% and 30.47% respectively, and 28-day drying shrinkage decreased by 3.2% and 4.6% respectively. Using recycled steel fibers combined with high-volume fly ash is a reasonable solution to save production costs and be environmentally friendly. Additionally, this solution not only improves the compressive and tensile strength but also limits plastic and drying shrinkage deformations of SCC. As a result, the durability of SCC is enhanced.
 
 

Utilizing Fine Marine Sediment as a Partial Substitute for Sand in Self-Compacting Concrete Specially Designed for Application in Marine Environments

The disposal of marine sediments poses a significant economic and environmental challenge on a global scale. To address this issue and promote resource optimization within a circular-economy paradigm, this research investigates the viability of incorporating untreated fine marine sediments as a partial replacement for sand in self-compacting concrete (SCC) designed especially for application in marine environments (an exposure class of XS2 and a resistance class of C30/37 according to standard NF EN 206). The concretes mis-design incorporating 30% by weight of sediment as a sand substitute was initially designed with the modified Dreux–Gorisse method. The findings indicate that it is feasible to design an SCC suitable for marine environments, incorporating 30% sediment replacement content and without significantly compromising concrete properties, durability, or the estimated lifespan of the formulated concretes. The integration of marine sediment as a sand substitute into the SCC mix design reduces the amount of binder and limestone filler without compromising the paste volume. This results in a significant saving of natural sand resources and a reduction in CO2 emissions for SCC made with marine sediment.

The role of additives in estimating service life of self-compacting concrete mix design using FIB modelling

The purpose of this study is to examine the influence of additives on estimating the useful service life of self-compacting concrete (SCC). For that, durability tests were performed on 43 SCC mix designs to estimating the service life of SCC based on the FIB model. The investigated supplementary materials included xanthan gum at concentrations of 0.2% and 0.25% by weight of cement, microsilica at concentrations of 5%, 7% and 10% by weight of cement, and nanosilica at concentrations of 2%, 3% and 4% by weight of cement. All 43 designs met the reliability index of the model, thereby obtaining the estimated service life for each design. The findings revealed that in chloride-rich environments, the control sample exhibited greater penetration depth compared to the concretes incorporating xanthan gum, microsilica and nanosilica additives. This observation suggests that the inclusion of xanthan gum extends the service life of SCC due to the formation of a denser and more cohesive structure in the hydration products of xanthan gum-modified concrete. Additionally, the investigations conducted indicate that the presence of nano and micro additives effectively reduces voids, while xanthan gum plays a significant role in minimising cracking and enhancing the thickening properties of the concrete.

Numerical modeling of the funnel multiphysical flow of fresh self-compacting concrete considering proportionate heterogeneity of aggregates

Filling ability is one of the prominent rheological properties of the self-compacting concrete (SCC), which has been studied in this research work deploying the functional behavior of the concrete through the studied funnel apparatus using the coupled ANSYS-SPH interface. Seven (7) model cases were studied and optimized. The aim of this numerical study is to propose a more sustainable mix of coarse and fine aggregates proportion that allows for most minimum flow time to enhance a more efficient filling of forms during concreting. The maximum size of the coarse aggregates considered is 20 mm and that of the fine aggregates is below 4 mm. The Bingham model properties for the multiphysics (SPH)-ANSYS models’ simulation are; viscosity = 20 ≤ μ ≤ 100 and the yield stress = 50 ≤τ0≤200\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\le {\ au }_{0}\\le 200$$\\end{document}, standard flow time, t (s) ranges; 6 ≤ t ≤ 25 and the funnel volume is 12 L. The minimum boundary flow time, which represents the time it takes for the SCC to completely flow through a specified distance, typically measured in seconds was modeled for in the seven (7) model cases. The second case with 40% coarse mixed with 60% fine completely flowed out in 16 s, thus fulfilling the minimum flow time. This minimum flow time was considered alongside other relevant parameters and tests, such as slump flow, passing ability, segregation resistance, and rheological properties (stresses), to comprehensively assess the filling ability of SCC in this model. By considering these factors and the optimized mix (40%C + 60%F:16s), engineers and researchers can optimize the SCC mix design to achieve the desired flowability and filling performance for their specific construction applications. The multiphase optimized mix was further simulated using the coupled interface of the ANSYS-SPH platform operating with the CFX command at air temperature of 25 °C. The results show energy reduction jump at the optimized flow time. Ideally, the mix, 40%C + 60%F:16s has been proposed as the mix with the most efficient flow to achieve the filling ability for sustainable structural concrete construction.

Experimental study on the effect of colloidal nano silica in high strength self-compacting concrete containing ground granulated blast furnace slag

Self-compacting concrete (SCC) is profusely utilized in building construction due to its unique design and mechanism of flow without segregation by occupying the corners and preventing the voids to achieve better compaction and mechanical strength. This work addresses the effect of colloidal nano-silica (NS) of size 5-40nm with an active nano solids content of 32% on the high-strength SCC containing Ground Granulated Blast Furnace Slag (GGBFS) and Ordinary Portland Cement as binders in addition to NS. The liquid content of 68% in NS was added to the water content in the mix. The ratios of NS were evaluated at 0%,0.5%,1%,1.5%, 2% and GGBFS as 20% by weight of binder in concrete. The water to binder ratio was 0.33 with a water and binder content of 184kg/m3 and 557.58 kg/m3. The optimum mix was 1.5% NS based on the concrete’s slump and compressive strength at 28 days. The slump was reduced with a rise in NS beyond 1.5% due to the accumulation of NS particles causing the reduction in flowability. The density of SCC for all the mixes was satisfactory. The compressive strength of optimum SCC, M21.5NS20G was decreased by 5.88% and increased by 0.49% and 2.45% at 7, 28 and 91 days to that of the reference mix whereas its split tensile strength was risen by 31.13%, 9.27%, and 12.41% and flexural strength was risen by 5.8% and reduced by 8.17% and 4.06% to that of the reference mix at aforementioned durations. The SEM and XRD analyses were conducted on the optimum hardened SCC mix at 28 days in which the presence of Calcium silicate hydrate compounds of different crystalline structures, viz., Ettringite, and Portlandite were observed. The SCC designed in the work can be used for structural applications such as beam-column joints.

RHEOLOGY AS A TOOL FOR TECHNOLOGICAL ADVANCEMENTS IN SELF-COMPACTING LIGHTWEIGHT CONCRETE MIXES

This paper outlines a methodology aimed at enhancing the technological performance of self-compacting concrete using lightweight expanded clay aggregate. One of the primary challenges encountered when employing concrete with lightweight aggregate involves displacing expanded clay grains within the solution's liquid phase to ensure necessary fluidity (workability) while upholding high stability (structural viscosity and segregation resistance). To achieve this objective, the rheological parameters of the self-compacting cement matrix have been regulated by deliberately adjusting the functional groups of additives and the microfine mineral filler, employing analytical methods from computer materials science. Through the analysis of rheometric results obtained from investigating various solution mixtures, the most suitable model that describes their rheological behaviour has been identified. The impact of finely dispersed fly ash excipient, a carboxylate superplasticiser, and a stabiliser additive on the rheological parameters of self-compacting lightweight concrete mixes has been established. The inclusion of these complex additives in the composition has enabled substantial alterations in the flow index across a wide range (0,030-0,798). This adaptability allows for the adjustment of the mortar mixture's rheological behaviour throughout a spectrum ranging from «abnormally viscous liquid» to «Newtonian liquid». This approach, examining the singular-factor dependencies' analysis on the coefficients of rheological behaviour models, aids in addressing the primary challenge encountered when using concrete with lightweight aggregate.

Carbonation resistance of sustainable self-compacting concrete with recycled concrete aggregate and fly ash, slag, and silica fume

This study focused on the problem of recycling construction and demolition wastes as well as industrial waste by-products into sustainable concrete materials. By combining addition of three different industrial waste by-products, an environmentally friendly recycled aggregate self-compacting concrete (RA-SCC) mix was put forward. Carbonation resistance and microstructure of SCC incorporating high volumes of industry by-products and recycled aggregates were studied in this paper. A total of 9 RA-SCC with 50%, 75% supplementary cementitious materials (SCMs) and different SCM combinations were prepared, which consist of binary mix with fly ash (FA), ternary mix with FA and ground granulated blast-furnace slag (GGBS), and quaternary mix with FA, GGBS, and silica fume (SF). An exposure period of 3, 7, 14, and 28 days was adopted for accelerated carbonation tests. The test results indicate that, as RCAs content increased, RA-SCC carbonation depth increased. The carbonation depth of SCC with 100% RCAs increased by 49.35% compared to that of normal SCC. In addition, carbonation resistance of RA-SCC mixes with a given compressive strength decreased with increasing SCM content. However, the loss in carbonation resistance was greatly mitigated by the combined addition of different SCMs, on account of the substitution of cement with industrial by-products and natural aggregates with RCAs. The combined addition of different SCMs enhanced the carbonation resistance of RA-SCC mixes. The test results were validated through microstructural analysis using scanning electron microscopy (SEM), and X-ray diffraction (XRD). A comparison between predictions calculated using existing models and measured carbonation depth was implemented. By taking into account the effect of RCAs and SCMs, a modified carbonation model in conjunction with fib carbonation model was put forward.

Assessing the engineering properties of massive self-compacting geopolymer concretes utilising the Taguchi method

In this article, the potential of employing self-compacting geopolymer concrete in massive elements has been investigated. The main binder consisted of 85% ground granulated blast furnace slag and 15% fly ash. An alkaline solution of sodium hydroxide and sodium silicate was utilised. The effects of four parameters (binder content, water-to-binder [W/B] ratio, Na2O% and coarse-to-fine aggregate [C/F] ratio) on the fresh, mechanical and thermal properties of Massive Self-Compacting Geopolymer Concrete (MSCGC) mixes were evaluated. Taguchi’s design of experiments was used to minimise the number of trial mixes. The heat of geopolymerisation of MSCGCs was monitored using a semi-adiabatic chamber and then applied to concrete samples using a temperature match curing system. The maximum compressive and splitting tensile strengths and modulus of elasticity were 62.7 MPa, 5.04 MPa and 33.26 GPa, respectively. Binder content was identified as the most significant parameter affecting the thermal and mechanical properties of the mixtures. The impact of the C/F ratio was greater than the W/B ratio on the thermal characteristics. The results of a numerical analysis reveal that although a higher binder content enhances the mechanical properties of the MSCGCs, it leads to an increased risk of cracking owing to greater heat production.

Studies on Properties of Sisal Fiber Reinforced Self Compacting Concrete

Abstract: To evaluate the mechanical properties of self-compacting concrete (M30) with sisal fibers. Self-compacting concrete (SCC) mixes are produced by replacing the cement with Fly ash and with addition of sisal fiber of 0, 0.5%, 1% and 1.5% and length of fibers considered are 5mm, 10mm, and 20mm to the SCC concrete. Sulphonated naphthalene Formaldehyde condensates-based SP is used as water reducing agent. Compressive strength of SCC mix has to be determined at 7, 14 and 28 days. Flexural strength of SCC mix has to be determined at 14 and 28 days. Impact strength of SCC mix has to be determined at 28 days.

The Effect of Polypropylene Fibers on the Behavior of Fiber Self-Compacting Concrete

Fiber self-compacting concrete (FSCC), is a concrete that has been combined with fiber in its mix design. Extensive benefits of self-compacting concrete (SCC) in full fill the mold and achieving full compaction without vibration, with good behavior after concrete cracking, raise the idea of self-compacting concrete production. The fundamental challenge in this area is the unsatisfactory performance of concrete with fibers; In other words, using fibers in concrete will reduce concrete fluidity. Therefore, determining the appropriate percentage of fibers in SCC can be a precursor to extending the use of FSCC. In this study, polypropylene fibers with 0.5, 1, 0.1, and 2% of concrete mix design have been added to the self-compacting concrete mix design. Its impact on the performance of concrete has been evaluated using time and diameter of slump-flow, L-Box, J-ring, and V-funnel flow time tests. Based on the criteria defined by EFNARC standard, it was indicated that the FSCC containing 0.5% polypropylene fibers has an acceptable performance. Additionally, the effect of polypropylene fiber on the mechanical properties of hardened concrete has been studied using compressive strength and tensile tests and shown that changes in FSCC compressive strength and tensile with 0.5% polypropylene fiber are negligible.

Utilization of industrial-based PVC waste powder in self-compacting concrete: A sustainable building material

Conventional experimental studies in concrete primarily focus on strength properties and microstructural analysis and ignore the environmental impacts of chosen waste in concrete. The present study addresses this critical research gap and uses industrial-based polyvinyl chloride (PVC) waste to demonstrate and meet the requirements of field practitioners and researchers. In the present study, various proportions of industrial-based PVC waste powder (PWP) (0–30%) by weight of cement were considered to partially replace cement in an M60 grade of self-compacting concrete (SCC). The first part of the study covers the fresh and strength properties of SCC, which was prepared using cement, sand, gravel, water, superplasticizer, SCM-like silica fume, ground granulated blast furnace slag, and PWP. In the second part of the study, the microstructure of various SCC mixes was investigated to understand the effects of PWP on the microstructure of the prepared SCC mixes. The optimum design mix for SCC was chosen based on extensive experimental and microstructural investigations. Further, a life cycle assessment was used to determine the influence of PWP on SCC usage from an environmental impact point of view for the optimized mixes. Considering all criteria, the results show that an SCC containing 5–10% PWP as a replacement for cement can be used. The present study establishes that using PWP in SCC is beneficial for the environment and can help lower the cost of SCC without compromising its strength and durability.

AI-guided design of low-carbon high-packing-density self-compacting concrete

Self-compacting concrete (SCC) has gained substantial traction in modern engineering due to its exceptional fresh and hardened properties. However, traditional SCC design methods encounter significant challenges. Conventional experimental design approaches often necessitate a considerable number of trial mixes to fulfill diverse performance objectives, incurring escalated material, time, and labor costs. Additionally, conventional SCC designs tend to use high cementitious material content, leading to elevated carbon emissions and energy consumption compared to ordinary concrete. To address these issues, this study proposes a novel approach that combines the compressible packing model (CPM) with machine learning (ML) techniques. This approach innovatively utilizes particle packing theory to guide ML in optimizing SCC aggregate grading and mix proportions. By integrating physical principles into artificial intelligence, this approach facilitates the intelligent design of low-carbon, high-packing-density SCC. Compared to the conventional method, SCC designed using the innovative AI approach demonstrates a 57.2% reduction in embodied carbon emissions.

Machine Learning Models for the Prediction of the Compressive Strength of Self-Compacting Concrete Incorporating Incinerated Bio-Medical Waste Ash

Self-compacting concrete (SCC) is a special form of high-performance concrete that is highly efficient in its filling, flowing, and passing abilities. In this study, an attempt has been made to model the compressive strength (CS) of SCC mixes using machine-learning approaches. The SCC mixes were designed considering lightweight expandable clay aggregate (LECA) as a partial replacement for coarse aggregate; ground granulated blast-furnace slag (GGBS) as a partial replacement for binding material (cement); and incinerated bio-medical waste ash (IBMWA) as a partial replacement for fine aggregate. LECA, GGBS, and IBMWA were replaced with coarse aggregate, cement, and fine aggregate, respectively at different substitution levels of 10%, 20%, and 30%. M30-grade SCC mixes were designed for two different water/binder ratios—0.40 and 0.45—and the CS of the SCC mixes was experimentally determined along with the fresh state properties assessed by slump-flow, L-box, J-ring, and V-funnel tests. The CS of the SCC mixes obtained from the experimental analysis was considered for machine learning (ML)-based modeling using paradigms such as artificial neural networks (ANN), gradient tree boosting (GTB), and CatBoost Regressor (CBR). The ML models were developed considering the compressive strength of SCC as the target parameter. The quantities of materials (in terms of %), water-to-binder ratio, and density of the SCC specimens were used as input variables to simulate the ML models. The results from the experimental analysis show that the optimum replacement percentages for cement, coarse, and fine aggregates were 30%, 10%, and 20%, respectively. The ML models were successful in modeling the compressive strength of SCC mixes with higher accuracy and the least errors. The CBR model performed relatively better than the other two ML models, with relatively higher efficiency (KGE = 0.9671) and the least error (mean absolute error = 0.52 MPa) during the testing phase.

Experimental Study of Dynamic Tensile Strength of Steel-Fiber-Reinforced Self-Compacting Concrete Using Modified Hopkinson Bar.

As a typical brittle material, the tensile strength of concrete is much lower than its compressive strength. The main failure mode of concrete buildings under explosive and impact loading is spalling, so it is crucial to understand the dynamic tensile performance of concrete. This paper presents an experimental study on the dynamic tensile strength of steel-fiber-reinforced self-compacting concrete (SFRSCC). Specimens of two different self-compacting concrete (SCC) mixes (C40 and C60) and four different fiber volume fractions (0.5%, 1.0%, 1.5%, and 2.0%) are fabricated. Dynamic tensile strengths of SFRSCC are obtained using a modified Hopkinson bar system. The relationships between the dynamic tensile strength of the corresponding SCC mix, the quasi-static compressive strength, and the fiber volume fraction are discussed. An empirical equation is proposed. It is shown that SFRSCC with high compressive strength has higher dynamic tensile strength than low-strength SFRSCC for the same fiber content, and the dynamic tensile strength of SFRSCC possesses an approximately linear relation with the fiber volume fraction. The mechanism underlying this fiber-reinforcement effect is investigated.

Performance of self-compacting concrete cast in hot weather conditions

This work focused on how self-compacting concrete (SCC) performs in situ in hot weather conditions at an ambient temperature of about 35°C. Tests for the rheological properties and compressive and splitting tensile strength aspects were carried out. The results of SCC mix ingredients on the rheological and hardened features of SCC mix were studied. Variations in the amount of portland cement content (CC), water to cement ratio (w/c), coarse to fine aggregate ratio (C : F), chemical admixture ratio, and pozzolanic admixture ratio were considered. Optimum values were obtained for these ingredients, which satisfied the SCC rheological characteristics and gave a 28-day compressive strength of 42 MPa, and 52 MPa after 28 days and 56 days, respectively. These optimum constituent values were 450 kg·m–3 of cement, 0.45 water cementitious ratio, and a coarse to fine material ratio of 1 : 0.8, a high range superplasticizer of 2%, and a mineral admixture of either 5% silica fume or 25% fly ash as a substitute for a similar amount cement.

Statistical mix design method for self-compacting concrete with limestone fillers

This study presents a statistical mix design method for self-compacting concrete (SCC) with limestone fillers (LF) content that considers mortar rheological properties and material packing characteristics. The effect of LF on the rheological properties of SCC was investigated through seven SCC mixes with different LF replacement levels. A basic water demand experiment was designed to obtain the packing density of mortar, and the equivalent packing density was defined and calibrated to represent the effect of LF. The relative spread and relative flow formula were modified based on the equivalent packing density, and the bilinear interpolation method was used to analyses the mortar results.

Comparative analysis of quaternary blended self-compacting concrete (QBSCC) mixes incorporating induction furnace slag (IFS) and crushed stone aggregate: A performance study

This study explores using Induction Furnace Slag (IFS) as aggregate in Quaternary Blended Self-Compacting Concrete (QBSCC) mixes. The experimental work consists of two stages. Stage I focuses on determining the optimal QBSCC mixes, aiming to develop environmentally friendly Self-Compacting Concrete (SCC) by utilizing different types and ratios of cementitious materials. A total of 27 QBSCC mixes were prepared with a reference SCC mix consisting of 100% ordinary Portland cement (OPC), are prepared considering water binder (w/b) ratio of 0.4. The quaternary blended mixes are created by combining OPC, class F Fly Ash (FA), Silica Fume (SF) and Ground Granulated Blast Furnace Slag (GGBFS). The replacement ranges for SF are set between 2.5% and 7.5% in increments of 2.5%, for FA between 10% and 20% in increments of 5%, and GGBFS between 30% and 50% in increments of 10%. In stage II, the optimized QBSCC mixes are further enhanced by incorporating IFS, the properties in the fresh state such as slump flow, V-funnel, L-box, and J-ring tests are conducted for all SCC mixes, all of which comply with the EFNARC guidelines. The mechanical characteristics studied, includes compressive strength (cube and cylinder), split tensile strength (at 3, 7, 28, and 56 days), flexural strength (at 28 and 56 days), elastic modulus, shear strength and pull-out bond strength (at 56 days) are evaluated. It is noted that the hardened properties of SCC mixes containing IFS exhibit slightly higher values compared to crushed stone aggregate SCC mixes. Furthermore, an increase in Supplementary Cementitious Material (SCM) content in QBSCC mixes leads to a decrease in the hardened properties, irrespective of the kind of aggregate used. The QBSCC mixes identified as SCC57.5/42.5, SCC52.5/47.5, and SCC47.5/52.5 are determined to be the preferred blends for producing Self-Compacting Concrete (SCC). Remarkably, Induction Furnace Slag (IFS) can be utilized as both fine and coarse aggregate, completely replacing conventional aggregates, regardless of the content of supplementary cementitious materials (SCM). This finding highlights the notable effectiveness of IFS as a replacement material in SCC production.