Selective Procedure Research Articles

The Relationship Between the Triple Airway Maneuver Insertion Technique and The Success Rate of Laryngeal Mask Airway Installation in Elective Surgery

Background: The Laryngeal Mask Airway (LMA) is a widely utilized supraglottic airway device by anesthesiologists in selective procedures, particularly in cases where intubation is not feasible or when managing a difficult airway. Complicating factors such as a short neck and large tongue can hinder LMA insertion, necessitating the use of the Triple Airway Maneuver (TAM). This technique involves a combination of head elevation, anterior mandible lift, and mouth opening to facilitate airway clearance. Purpose: This study was to evaluate the relationship between the TAM technique and the success rate of LMA insertion during elective surgeries at Dr. Soedirman Kebumen General Hospital. Methods: A cross-sectional, analytic study was conducted in June 2024, involving 52 respondents selected via purposive sampling. Data were collected using observation sheets. Findings: The findings revealed that the majority of respondents were aged 17-25 years (38.5%) and had a body mass index of 18.5-25.0 (73.1%). Non-smokers constituted 73.1% of the sample, while 46.2% had occupations involving repetitive neck movements. The TAM group achieved 45 successful LMA insertions, with 44 succeeding on the first attempt and 1 on the second, compared to 7 successful insertions in the non-TAM group. However, Kendall’s tau c test (p=0.056) indicated no statistically significant relationship between TAM and LMA insertion success rates, and the correlation coefficient (0.385) suggested a weak relationship. Conclusions: the TAM technique does not significantly influence the success rate of LMA insertion

Synchronous conversion and targeted separation of valuable metals from spent hydroprocessing catalysts

Sustainable recovery of spent hydroprocessing catalysts (sHPC) is crucial to address environmental and resources issues. However, the existing recycling methods recover limited metal components due to uncontrollable phase transition and complicated separation procedures, leading to poor utilization efficiency of the sHPC. Herein, a synchronous conversion and targeted separation strategy was designed to achieve full-component recovery of the sHPC. The insoluble phases of Al/Ni/Mo/V could be completely transformed into soluble sulfate via sulfation roasting at 400 °C. The roasted sulfate products can be directly leached by water with efficiencies close to 100%. Targeted separation of the multi-ions could be achieved based on their species difference in the leachates. Anionic HV10O285− and HMoO4− species were co-extracted by basic trioctylamine extractant, while cationic Ni2+ and Al3+ were extracted by acidic HBL110 and P204, respectively. Benefiting from the sulfation roasting and selective extraction procedures, the recovery efficiencies of Al, Ni, Mo, and V elements achieved 97.2%, 95.8%, 94.1%, and 94.3%, respectively. The explored synchronous conversion and targeted separation strategy is an industrial-feasible candidate for sustainable utilization of the retired catalysts.

Intra-arterial Pressure-Enabled Drug Delivery Significantly Increases Penetration of Glass Microspheres in a Porcine Liver Tumor Model

PurposeTo test the hypothesis that Pressure-Enabled Drug Delivery (PEDD) would improve the delivery of surrogate therapeutic glass microspheres (GMs) via hepatic artery infusion to liver tumors when compared with a conventional endhole microcatheter. Materials and MethodsThe study was conducted in transgenic pigs (Oncopigs) with induced liver tumors. Tumors were infused intra-arterially with fluorescently labeled GM. PEDD with a specialized infusion device (TriNav; TriSalus Life Sciences, Westminster, Colorado) was compared with conventional endhole microcatheter delivery in both lobar and selective infusions. Near-infrared imaging was used to detect GM fluorescent signal in tumors. Image analysis with a custom deep learning algorithm (Visiopharm A/S) was used to quantitate signal intensity in relation to the tumor border. ResultsWith lobar infusions, significant increases in GM signal intensity were observed in and around tumors after PEDD (n = 10) when compared with those after conventional delivery (n = 7), with PEDD increasing penetration into the tumor by 117% (P = .004). In selective infusions, PEDD (n = 9) increased penetration into the tumor by 39% relative to conventional delivery (n = 8, P = .032). Lobar PEDD of GMs to the tumor was statistically equivalent to conventional selective delivery (P = .497). ConclusionsPEDD with a TriNav device significantly improved GM uptake in liver tumors relative to conventional infusion in both lobar and selective procedures. Lobar GM delivery with PEDD was equivalent to conventional selective delivery with an endhole device, suggesting that proximal PEDD infusions may enable effective delivery without selection of distal target vessels.

Selective postmortem arterial angiography of head and neck using digital x-ray or computed tomography: A practical and rapid method to identify vascular injuries.

Identification of vascular injuries is crucial for complete postmortem evaluation and understanding of trauma deaths by the Medical Examiner. Some vascular injuries are difficult to evaluate due to challenging anatomic locations, especially in the head and neck. Documenting injuries of the facial and vertebral arteries is challenging and necessitates time-consuming dissections that can create artifacts and disfigurement. In busy medical examiner offices with a significant number of traumatic injuries, finding a creative solution to employ reliable postmortem angiography is desirable. At the Office of the Chief Medical Examiner for the State of Maryland (OCME), we created and effectively implemented a selective angiography procedure using traditional indwelling Foley catheters and water-soluble barium swallow contrast to evaluate arterial injuries using either digital radiography or computed tomography imaging modalities. This technique and imaging interpretation can be performed by a medical examiner or forensic pathology fellow after basic technical training and basic radiology training. This study outlines the technique, methods, and utilization of the procedure and describes the findings of six deaths due to vascular lesions from different injury mechanisms and disease processes and describes the ease of implementation on a broader scale in busy Medical Examiner's offices.

Office-based pediatric urology procedures.

Office-based procedures under local anesthesia are not a popular and well-accepted concept in pediatric urology except for newborn circumcision. There is limited literature on the utilization of office-based procedures under local anesthesia in pediatric urology. In this study, we present our experience of office-based procedures under local anesthesia from a tertiary center. This is a retrospective study of the patients who underwent meatotomy and penile adhesion release in the clinic under local anesthesia between January 2017 and August 2022 by a single surgeon in a tertiary center. A total of 92 patients were included in this study. There were 65 patients diagnosed with meatal stenosis and 27 patients diagnosed with penile adhesion. The overall incidence of recurrence was noted in four patients. Only one patient had minimal complications. The overall average follow-up was 5.39 months (1-10 months). Selective office-based procedure (meatotomy and penile adhesion release) under topical local anesthesia is a simple, safe, and effective method to treat such conditions with a high success rate, especially with financial and time constraints on health care nowadays.

Vessel-targeted compensation of deformable motion in interventional cone-beam CT

The present standard of care for unresectable liver cancer is transarterial chemoembolization (TACE), which involves using chemotherapeutic particles to selectively embolize the arteries supplying hepatic tumors. Accurate volumetric identification of intricate fine vascularity is crucial for selective embolization. Three-dimensional imaging, particularly cone-beam CT (CBCT), aids in visualization and targeting of small vessels in such highly variable anatomy, but long image acquisition time results in intra-scan patient motion, which distorts vascular structures and tissue boundaries. To improve clarity of vascular anatomy and intra-procedural utility, this work proposes a targeted motion estimation and compensation framework that removes the need for any prior information or external tracking and for user interaction. Motion estimation is performed in two stages: (i) a target identification stage that segments arteries and catheters in the projection domain using a multi-view convolutional neural network to construct a coarse 3D vascular mask; and (ii) a targeted motion estimation stage that iteratively solves for the time-varying motion field via optimization of a vessel-enhancing objective function computed over the target vascular mask. The vessel-enhancing objective is derived through eigenvalues of the local image Hessian to emphasize bright tubular structures. Motion compensation is achieved via spatial transformer operators that apply time-dependent deformations to partial angle reconstructions, allowing efficient minimization via gradient backpropagation. The framework was trained and evaluated in anatomically realistic simulated motion-corrupted CBCTs mimicking TACE of hepatic tumors, at intermediate (3.0 mm) and large (6.0 mm) motion magnitudes. Motion compensation substantially improved median vascular DICE score (from 0.30 to 0.59 for large motion), image SSIM (from 0.77 to 0.93 for large motion), and vessel sharpness (0.189 mm−1 to 0.233 mm−1 for large motion) in simulated cases. Motion compensation also demonstrated increased vessel sharpness (0.188 mm−1 before to 0.205 mm−1 after) and reconstructed vessel length (median increased from 37.37 to 41.00 mm) on a clinical interventional CBCT. The proposed anatomy-aware motion compensation framework presented a promising approach for improving the utility of CBCT for intra-procedural vascular imaging, facilitating selective embolization procedures.

Sequential Selective Dissolution of Coinage Metals in Recyclable Ionic Media.

Coinage metals Cu, Ag, and Au are essential for modern electronics and their recycling from waste materials is becoming increasingly important to guarantee the security of their supply. Designing new sustainable and selective procedures that would substitute currently used processes is crucial. Here, we describe an unprecedented approach for the sequential dissolution of single metals from Cu, Ag, and Au mixtures using biomass-derived ionic solvents and green oxidants. First, Cu can be selectively dissolved in the presence of Ag and Au with a choline chloride/urea/H2O2 mixture, followed by the dissolution of Ag in lactic acid/H2O2. Finally, the metallic Au, which is not soluble in either solution above, is dissolved in choline chloride/urea/Oxone. Subsequently, the metals were simply and quantitatively recovered from dissolutions, and the solvents were recycled and reused. The applicability of the developed approach was demonstrated by recovering metals from electronic waste substrates such as printed circuit boards, gold fingers, and solar panels. The dissolution reactions and selectivity were explored with different analytical techniques and DFT calculations. We anticipate our approach will pave a new way for the contemporary and sustainable recycling of multi-metal waste substrates.

Sequential Selective Dissolution of Coinage Metals in Recyclable Ionic Media

AbstractCoinage metals Cu, Ag, and Au are essential for modern electronics and their recycling from waste materials is becoming increasingly important to guarantee the security of their supply. Designing new sustainable and selective procedures that would substitute currently used processes is crucial. Here, we describe an unprecedented approach for the sequential dissolution of single metals from Cu, Ag, and Au mixtures using biomass‐derived ionic solvents and green oxidants. First, Cu can be selectively dissolved in the presence of Ag and Au with a choline chloride/urea/H2O2 mixture, followed by the dissolution of Ag in lactic acid/H2O2. Finally, the metallic Au, which is not soluble in either solution above, is dissolved in choline chloride/urea/Oxone. Subsequently, the metals were simply and quantitatively recovered from dissolutions, and the solvents were recycled and reused. The applicability of the developed approach was demonstrated by recovering metals from electronic waste substrates such as printed circuit boards, gold fingers, and solar panels. The dissolution reactions and selectivity were explored with different analytical techniques and DFT calculations. We anticipate our approach will pave a new way for the contemporary and sustainable recycling of multi‐metal waste substrates.

Pulsed Electric Field Technology for the Extraction of Glutathione from Saccharomyces cerevisiae.

Glutathione is a potent antioxidant that has shown promise in enhancing the processing of various foods and drinks such as bread and wine. Saccharomyces cerevisiae stands as a primary microorganism for glutathione production. This study sought to assess the potential of pulsed electric fields (PEFs) in extracting glutathione from S. cerevisiae cells. Yeast cells were subjected to PEF treatment (12 kV/cm, 150 µs) followed by incubation at varying pH values (4.0, 6.0, and 8.0) and temperatures (4 °C and 25 °C). Glutathione and protein extraction were assessed at different incubation times. Within one hour of incubation, PEF-treated yeast cells released over 60% of their total glutathione content, irrespective of pH and temperature. Notably, the antioxidant activity of the resulting extract surpassed that obtained through complete mechanical cell destruction and hot water, which form the conventional industrial extraction method in the glutathione industry. These results suggest that PEF could offer a rapid and more selective procedure, improving the extraction of this bioactive compound.

Ultrasound-Assisted Extraction- and Liquid Chromatography-Based Method Development and Validation for Obtaining and Qualitative Determination of Apple Pomace Three Triterpene Acids using Analytical Quality by Design

Background: Apple pomace has garnered significant attention within the life sciences domain due to its underutilized status as a waste material from apple processing. It represents a cost-effective and abundant source of triterpene acids due to its multifunctional clinical, nutritional, and pharmaceutical benefits. Purpose: The present study aimed to develop and validate a new, selective, effective, robust and reproducible laboratory methodology based on extraction, purification and analytical procedures to obtain and determining three major triterpene acids – Ursolic acid (UA), Oleanolic acid (OA) and Betulinic acid (BA) into the dry extracted product from apple pomace. Method: A new, cost-efficient, rapid, selective and high-yield two-stage ultrasound-assisted extraction procedure was developed and the effect of critical parameters: ultrasonic power, extraction time, solvent volume, temperature, and the amount of raw material on the extraction process were investigated. The dry column vacuum chromatography technique was used for purification to remove unwanted non-polar and polar impurities from the target bioactive compounds; A new, effective, specific, sensitive, and rapid HPLC analytical procedure was developed using analytical quality by design (AQbD) approach and validated according to ICH guidelines. Conclusion: The method has a good accuracy (the mean recovery >95 %) and linearity (R2>0.999). The limit of quantitation (LOQ) is 0.0001 mg/mL for UA, 0.00005 mg/mL for OA and 0.000025 mg/mL for BA. The validation results confirm that the method is specific, precise and robust. The purity of the extracted and purified target product from apple pomace is not less than 93 %. The developed laboratory methodology is capable of being considered for industrial purposes and through the appropriate technology transfer process can be successfully transferred to the industrial scale.

Az arteria meningea media embolisatio szerepe a krónikus subduralis haematoma kezelési algoritmusában, legújabb evidenciák és saját tapasztalataink

<p>Chronic subdural hematoma is one of the most common diseases requiring a neurosurgical operation that affect elderly and fragile patients. In addition to standard neurosurgical operations (trepanation and craniotomy), embolization of the meningeal artery media is an alternative solution. Several review aerticles have confirmed the very high rate of success and safety of the endovascular treatment. We present the technical details and results of our 10 consecutive selective media meningeal artery embolization procedures for residual chronic subdural hematomas. Our interventions were performed without complications and all resulted in complete recovery.&nbsp;</p>.

Is RATS Superior to VATS in Thoracic Autonomic Nervous System Surgery?

Technological development in the field of robotics has meant that, in recent years, more and more thoracic surgery departments have adopted this type of approach at the expense of VATS, and today robotic surgery boasts numerous applications in malignant and benign thoracic pathology. Because autonomic nervous system surgery is a high-precision surgery, it is conceivable that the application of RATS could lead to improved outcomes and reduced side effects, but its feasibility has not yet been thoroughly studied. This review identified three main areas of application: (1) standard thoracic sympathectomy, (2) selective procedures, and (3) nerve reconstruction. Regarding standard sympathectomy and its usual areas of application, such as the management of hyperhidrosis and some cardiac and vascular conditions, the use of RATS is almost anecdotal. Instead, its impact can be decisive if we consider selective techniques such as ramicotomy, optimizing selective surgery of the communicating gray branches, which appears to reduce the incidence of compensatory sweating only when performed with the utmost care. Regarding sympathetic nerve reconstruction, there are several studies, although not conclusive, that point to it as a possible solution to reverse surgical nerve interruption. In conclusion, the characteristics of RATS might make it preferable to other techniques and, particularly, VATS, but to date, the data in the literature are too weak to draw any evidence.

Single-level laminoplasty approach to selective dorsal rhizotomy with conus localization by rapid spine MRI

IntroductionWhile selective dorsal rhizotomy (SDR) was originally described as a multilevel approach, single-level approaches are now popularized. Conus localization is beneficial for operative planning in single-level selective dorsal rhizotomy. Our approach to SDR involves minimal exposure for a single-level laminoplasty, preserving one attached interspinous ligament. Pre-operative conus localization is required for this tailored approach to determine the laminoplasty level and dictate rostral or caudal division of the superior spinus ligament. While rapid MRI sequences have been popularized for pediatric cranial imaging, its utility for spinal imagining is less well-described, and specific application for conus localization has not been reported.ObjectiveIllustrate that rapid MRI without sedation is sufficient to identify conus level for tailored single-level laminoplasty SDR.Material and methodsPatients undergoing SDR from 2014 to 2022 at one institution were reviewed for type of pre-operative MRI (rapid vs full), conus level, procedural time for MRI, and radiology report. The typical rapid MRI has four sequences utilizing single-shot technique (scout, sagittal T2, axial T2, and axial T1) that typically take less than 1 min each of acquisition time, with non-single-shot sequences added periodically in cooperative patients. To include time for patient positioning, pre-scan shimming, procedural incidentals, and other patient-specific variations, MRI procedure length was recorded as documented in the electronic medical record.ResultsN = 100 patients had documentation of an MRI for pre-operative imaging. Seventy-nine of these had a rapid MRI, and 21 required a full MRI with anesthesia for their treatment plan. Mean total procedure time for rapid MRI was 21.5 min (median 17). Mean procedure time for MRI under general anesthesia was 91.2 min (median 94). Of patients with rapid MRI imaging, 2/79 had an ambiguous conus level (1 from motion artifact, 1 from spinal hardware) vs 1/21 with a full MRI under anesthesia (due to spinal hardware).ConclusionRapid spinal MRI without sedation can be used for conus localization in a pediatric population. This may be routinely used as pre-operative imaging for a single-level approach to selective dorsal rhizotomy, without sedation or intubation procedures.

Comparison of kinematics and pedobarography findings between the unaffected foot of patients with unilateral clubfoot and controls.

Idiopathic clubfoot (ICF) involves structural abnormalities in the lower extremities. Approximately half of patients have unilateral ICF, which could be due to differences in limb formation. The contralateral unaffected foot may have subclinical ICF. The objectives were to compare ankle and foot kinematics and pedobarography findings between the unaffected foot of patients with unilateral ICF and controls. Eleven children with unilateral ICF (11 unaffected feet, 11.7 ± 3.8years) and 15 age-matched controls (30 control feet, 11.1 ± 3.0years) were enroled. Five complete gait trials were performed. Data were collected using ten cameras and a twom long Footscan system and compared between groups using the Wilcoxon rank sum test. All children with ICF underwent the selective soft tissue release procedure. The unaffected feet showed limited ranges in inversion-eversion and dorsiflexion-plantar flexion on kinematic analysis. There was a delay in landing time in all regions of the foot during heel rise and propulsion. The peak time was achieved significantly later in the unaffected feet compared to the controls. Although plantar pressure parameters were comparable, unaffected feet showed a larger contact area in the midfoot region. Gait data on the unaffected foot in unilateral ICF patients do not correspond to those of controls despite an indistinguishable clinical appearance. This could be due to the effect of treatment, the process of foot development, or a combination. The relationship between genetics and gait deviation in patients with unilateral ICF needs further evaluation. The unaffected foot should receive similar attention during follow-up.

Partial Versus Radical Nephrectomy: Comparison of Postoperative Complications and Contribution to Mortality

Background: Partial nephrectomy is the preferred treatment method for certain kidney tumors owing to its nephron-preserving benefit. We aimed to compare the occurrence and importance of complications after radical (RN) or partial (PN) nephrectomy for localized renal cell carcinoma (RCC) and contribution to patient mortality. Methods: All RCC cases were extracted from the National Surgical Quality Improvement Program between 2005 and 2017. All-cause mortality was the primary endpoint that defined a failure to rescue (FTR) after the occurrences of complications. Propensity score matching (PSM) was performed to adjust for confounding variables between the 2 groups. The exclusion criteria included patients on dialysis, those with distant metastases, and those with concurrent procedures. Null hypotheses were rejected when P-values were &lt; .05. Results: The database included 24,830 patients, with 22,015 in the RN group and 2815 in the PN. After PSM, 2226 patients after PN were matched 1:1 to an equal number of patients who underwent RN. Overall, postoperative complications occurred in 20.5% after RN, more frequent than 15.9% after PN (P &lt; .001). While the mortality rates were similar, patients were more likely to experience blood transfusion and reintubation, as well as longer hospital stay after RN, while they were likely to have more infectious complications, including abdominal abscess, and more likely to return to the operating room after PN. In both groups, cardiac and respiratory complications were associated with FTR, leading to mortality. Excessive bleeding (requiring transfusion) was also a significant cause of death after RN but not after PN. Conclusion: When planning PN or RN, patients should be counseled on the risks of their selective procedure and the potential increased mortality risk with certain complications. These risks should be weighed against the benefit of those cancer surgeries.

Development of heat-assisted in-situ solvent formation liquid phase microextraction followed by derivatization for the simultaneous extraction of aliphatic amines from wastewater samples prior to gas chromatography-mass spectrometry

Herein, a cost-effective, rapid, and selective liquid phase microextraction procedure has been developed for the extraction of some aliphatic amines from sewage samples. The method was based on in-situ formation of chloroform as an extraction solvent into the sample solution followed by derivatization by butylchloroformate prior to gas chromatography- mass spectrometry. Chloroform is formed by the reaction of chloral hydrate and sodium hydroxide. The extraction procedure was accelerated by heating. Also heating decreases chloroform solubility in aqueous solution. To improve the analytical signals, derivatization of the analytes is done by butylchloroformate. The effect of major parameters on the extraction efficiency were studied and optimized. Under the optimized conditions, enrichment factor and extraction recovery were in the ranges of 259–296 and 78–89 %, respectively. Low limits of detection (0.08–0.12 ng mL−1) and quantification (0.28–0.41 ng mL−1), wide linear ranges, and relative standard deviations less than 6 % for intra −and inter-day precisions were acceptable. Lastly, the mentioned method was successfully performed to determine aliphatic amines in wastewater samples.

Addressing arbitrary body forces in 2D elasticity coupling the Radial Basis Integration Method with boundary elements

A boundary-domain integral formulation inevitably arises when the boundary element method (BEM) is applied for solving the differential equation that governs linear elastostatic problems with body forces. Although the domain integrals introduced by the body forces can be evaluated using internal cells this destroys the boundary-only meshing feature of BEM and makes the integration processes inefficient. This paper shows that these problems can be solved more efficiently without using internal cells by the Radial Basis Integration Method (RBIM) which employs a meshless quadrature obtained by performing boundary-only offline computations. Using RBIM, weakly singular domain integrals can be computed via a simple selective quadrature procedure, whereas, strong singular domain integrals may be computed using two schemes: The first, is based on the same selective quadrature procedure, and the second is based on the singularity separation scheme. The present method, unlike classical radial integration method (RIM), does not have problems in calculating integrals in concave or multiple-connected domains. The results obtained in some 2D linear elastostatic problems with arbitrary body forces show that this method can be as accurate as RIM but less time-consuming than the latter. This method could be applied to other engineering problems involving source terms.

Perinatal outcomes between immediate vs deferred selective termination in dichorionic twin pregnancies with fetal congenital anomalies: a French multicenter study

Because selective termination for discordant dichorionic twin anomalies carries a risk of pregnancy loss, deferring the procedure until the third trimester can be considered in settings where it is legal. To determine whether perinatal outcomes were more favorable following deferred rather than immediate selective termination. A French multicenter retrospective study from 2012 to 2023 on dichorionic twin pregnancies with selective termination for fetal conditions, which were diagnosed before 24 weeks gestation. Pregnancies with additional risk factors for late miscarriage were excluded. We defined 2 groups according to the intention to perform selective termination within 2 weeks after the diagnosis of the severe fetal anomaly was established (immediate selective termination) or to wait until the third trimester (deferred selective termination). The primary outcome was perinatal survival at 28 days of life. Secondary outcomes were pregnancy losses before 24 weeks gestation and preterm delivery. Of 390 pregnancies, 258 were in the immediate selective termination group and 132 in the deferred selective termination group. Baseline characteristics were similar in both groups. Overall survival of the healthy co-twin was 93.8% (242/258) in the immediate selective termination group vs 100% (132/132) in the deferred selective termination group (P<.01). Preterm birth <37 weeks gestation was lower in the immediate than in the deferred selective termination group (66.7% vs 20.2%; P<.01); preterm birth <28 weeks gestation and <32 weeks gestation did not differ significantly (respectively 1.7% vs 0.8%; P=.66 and 8.26% vs 11.4%; P=.36). In the deferred selective termination group, an emergency procedure was performed in 11.3% (15/132) because of threatened preterm labor, of which 3.7% (5/132) for imminent delivery. Overall survival after selective termination was high regardless of the gestational age at which the procedure was performed. Postponing selective termination until the third trimester seems to improve survival, whereas immediate selective termination reduces the risk of preterm delivery. Furthermore, deferred selective termination requires an expert center capable of performing the selective termination procedure on an emergency basis if required.

Financial Development, Renewable Energy Consumption and Industrial Output Relation: Testing Fourier ARDL for Turkey

Abstract Energy plays a vital role in every aspect of the economy and in recent years renewable energy is highly debated for its pros and cons. While renewable energy consumption is important for sustainable growth and reduction of environmental damage it has some negative effects on the industrial production. The aim of the study is to examine the relationship between renewable energy consumption, financial development and industrial output for Turkey. Annual data between 1980 and 2019 were used in the study. Fractional Fourier Augmented Dickey-Fuller Unit Root Test and the Fourier Autoregressive Distributed Lag Bound Tests were used to analyze the relationship between variables. As a result of the study, a positive relationship was found between financial development and renewable energy consumption, while a negative relationship was found between industrial output and renewable energy consumption. Our empirical findings have important policy implications. According to these policy implications, the focus should be on a green-based economy with various subsidies, selective taxation procedures and incentive policies to increase the demand for renewable energy use.

Performance Evaluation of Nonlinear Viscoelastic Materials using Finite Element Method

This research paper applies the finite element method as a methodology to evaluate the structural performance of nonlinear viscoelastic solids. A finite element algorithm was built and developed to simulate the mathematical nonlinear viscoelastic material behavior based on incremental constitutive equations. The derived Equation of the incremental constitutive included the complete strain and stress histories. The Schapery’s nonlinear viscoelastic material model was integrated within the displacement-based finite element environment to perform the analysis. A modified Newton-Raphson technique was used to solve the nonlinear part in the resultant equations. In this work, the deviatoric and volumetric strain–stress relations were decoupled, and the hereditary strains were updated at the end of each time increment. It is worth mentioning that the developed algorithm can be effectively employed for all the permissible values of Poisson’s ratio by using a selective integration procedure. The algorithm was tested for a number of applications, and the results were compared with some previously published experimental results. A small percentage error of (1%) was observed comparing the published experimental results. The developed algorithm can be considered a promising numerical tool that overcomes convergence issues, enhancing equilibrium with high-accuracy results.