Selective Photoreduction Of CO2 Research Articles

Perovskite Nanocrystals In Situ Encapsulated in TiO2 Microspheres for Stable CO2 Photoreduction in Water.

Photoreduction of carbon dioxide (CO2) into fuels presents a promising approach to mitigate global warming and energy crises. Halide perovskite nanocrystals (NCs) with prominent optoelectronic properties have triggered substantial attention as photocatalysts but are limited by the charge recombination and instability. Here, we develop stable CsPbBr3/titania microspheres (TMs) by in situ growth of CsPbBr3 NCs inside mesoporous TMs through solid-state sintering, which significantly improves the stability of perovskite NCs, making them applicable in water with efficient CO2 photoreduction performance. Notably, the CsPbBr3/TMs demonstrates a 6.73- and 9.23-fold increase in the rate of CH4 production compared to TMs and CsPbBr3, respectively. The internal electric field facilitates S-scheme charge transfer, enhancing the separation of electron-hole pairs, as evidenced by X-ray photoelectron spectroscopy and electron paramagnetic resonance analysis, which is pivotal for the selective photoreduction of CO2. These insights pave the way for the design of CsPbBr3-based photocatalysts with superior efficiency and stability.

Solar-Driven Conversion of CO2 to C2 Products by the 3d Transition Metal Intercalates of Layered Lead Iodides.

Photocatalytic CO2 reduction to high-value-added C2+ products presents significant challenges, which is attributed to the slow kinetics of multi-e- CO2 photoreduction and the high thermodynamic barrier for C-C coupling. Incorporating redox-active Co2+/Ni2+ cations into lead halide photocatalysts has high potentials to improve carrier transport and introduce charge polarized bimetallic sites, addressing the kinetic and thermodynamic issues, respectively. In this study, a coordination-driven synthetic strategy is developed to introduce 3d transition metals into the interlamellar region of layered organolead iodides with atomic precision. The resultant bimetallic halide hybrids exhibit selective photoreduction of CO2 to C2H5OH using H2O vapor at the evolution rates of 24.9-31.4µmol g-1h-1 and high selectivity of 89.5-93.6%, while pristine layered lead iodide yields only C1 products. Band structure calculations and photoluminescence studies indicate that the interlayer Co2+/Ni2+ species greatly contribute to the frontier orbitals and enhance exciton dissociation into free carriers, facilitating carrier transport between adjacent lead iodide layers. In addition, Bader charge distribution calculations and in situ experimental spectroscopic studies reveal that the asymmetric Ni-O-Pb bimetallic catalytic sites exhibit intrinsic charge polarization, promoting C-C coupling and leading to the formation of the key *OC-CHO intermediate.

Vacancy modulation on NiTi-layered double hydroxides towards highly selective CO2 photoreduction

Photoreduction of carbon dioxide (CO2) is a promising way to achieve sustainable energy production and alleviate environmental problems. Herein, we report a NiTi-layered double hydroxides photocatalyst with bivalent and trivalent metal vacancies (denoted as NiVTiV-LDHs) via alkali-etching amphoteric metal cations (Zn and Al) from NiZnTiAl-LDHs precursor. The NiVTiV-LDHs attains a CH4 selectivity of 94% with a production rate of 2398 µmol g−1 h−1, which is preponderant to the state-of-the-art photocatalysts. Operando X-ray absorption fine structure (XAFS) and Fourier-transform infrared spectroscopy (FT-IR) characterizations combined with density functional theory (DFT) calculations corroborate that Ni2+δ−O(H)−Ti3+ζ sites modulated by adjacent vacancies exhibits a declined 3d-orbital occupancy, accelerating the charge transfer for boosting CH4 formation. Moreover, the unique adsorption configuration (Ni2+δ/Ti3+ζ−CO) not only stabilizes the key intermediate *CO for further protonation, but also induces a decreased energy barrier of the rate-determining step (hydrogenation of *OCH3), accounting for the robust photocatalytic CO2 reduction towards CH4.

In-situ synthesis of V2AlC@V2O5/TiO2 immobilized over honeycomb support with vanadium oxide electron transfer mediator for stimulating selective CO2 photoreduction through bi-reforming in a monolith reactor

Photocatalytic CO2 reduction to valuable chemicals and fuels is a practical approach for climate action; however, available photocatalysts and photoreactors are less efficient. In this work, well-designed V2AlC@V2O5 supported TiO2 and immobilized over honeycomb support for CO2 photoreduction in a monolith reactor have been investigated. The catalysts were loaded over the monolithic support using the sol-gel dip-coating method and found promising for higher light absorbance and charge separation. The performance of V2AlC@V2O5/TiO2 composite for photocatalytic CO2 reduction with water and bi-reforming of methanol was performed using a fixed bed and monolith photoreactor. Using V2AlC@V2O5/TiO2 with a fixed bed reactor and methanol–water mixture, a CO yield of 13.75 mmol g−1h−1 was produced, 26.39 and 38.19-fold higher than using water and pristine TiO2, respectively. Similarly, CH4 production was 1.97 and 12.33 folds higher than using water and TiO2 only, whereas, using water, production of H2 was not detected. The higher photoactivity of the composite with methanol was due to efficient photo-induced carrier separation due to the synergistic effect of V2AlC/V2O5 and more production of protons. Using a monolith photoreactor, CH4, CO and H2 production rates of 55.44, 35.51 and 1.638 mmol g−1h−1 were obtained, 166.50, 2.58 and 3.05 times more than those produced using a fixed bed reactor. This significantly higher photoactivity with monolith photoreactor was due to higher photon flux utilization with surface reactions, resulting in more production and utilization of photoinduced charge carriers. The highest QY after five consecutive cycles was 48.374, 25.358 and 1.51 % for CH4, CO and H2, which is 200.5, 2.54 and 3.87 folds higher than using the fixed bed, respectively. This work provides a new approach to designing and fabricating higher efficient and stable photocatalytic system for CO2 recycling, and it can be further employed for other energy-related applications.

Metal active sites regulation in copper phthalocyanine/bismuth vanadate Z-scheme heterojunction by electron-withdrawing substituent for selective CO2 photoreduction in pure water

Metal active sites regulation in copper phthalocyanine/bismuth vanadate Z-scheme heterojunction by electron-withdrawing substituent for selective CO2 photoreduction in pure water

Construction of an Electron Capture and Transfer Center for Highly Efficient and Selective Solar-Light-Driven CO2 Conversion.

Exploring high-efficiency photocatalysts for selective CO2 reduction is still challenging because of the limited charge separation and surface reactions. In this study, a noble-metal-free metallic VSe2 nanosheet was incorporated on g-C3N4 to serve as an electron capture and transfer center, activating surface active sites for highly efficient and selective CO2 photoreduction. Quasi in situ X-ray photoelectron spectroscopy (XPS), soft X-ray absorption spectroscopy (sXAS), and femtosecond transient absorption spectroscopy (fs-TAS) unveiled that VSe2 could capture electrons, which are further transferred to the surface for activating active sites. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations revealed a kinetically feasible process for the formation of a key intermediate and confirmed the favorable production of CO on the VSe2/PCN (protonated C3N4) photocatalyst. As an outcome, the optimized VSe2/PCN composite achieved 97% selectivity for solar-light-driven CO2 conversion to CO with a high rate of 16.3 μmol·g-1·h-1, without any sacrificial reagent or photosensitizer. This work offers new insights into the photocatalyst design toward highly efficient and selective CO2 conversion.

Hydrogen-Bond-Network Breakdown Boosts Selective CO2 Photoreduction by Suppressing H2 Evolution.

Conventional strategies for highly efficient and selective CO2 photoreduction focus on the design of catalysts and cocatalysts. In this study, we discover that hydrogen bond network breakdown in reaction system can suppress H2 evolution, thereby improving CO2 photoreduction performance. Photosensitive poly(ionic liquid)s are designed as photocatalysts owing to their strong hydrogen bonding with solvents. The hydrogen bond strength is tuned by solvent composition, thereby effectively regulating H2 evolution (from 0 to 12.6 mmol g-1 h-1). No H2 is detected after hydrogen bond network breakdown with trichloromethane or tetrachloromethane as additives. CO production rate and selectivity increase to 35.4 mmol g-1 h-1 and 98.9 % with trichloromethane, compared with 0.6 mmol g-1 h-1 and 26.2 %, respectively, without trichloromethane. Raman spectroscopy and theoretical calculations confirm that trichloromethane broke the systemic hydrogen bond network and subsequently suppressed H2 evolution. This hydrogen bond network breakdown strategy may be extended to other catalytic reactions involving H2 evolution.

Hydrogen‐Bond‐Network Breakdown Boosts Selective CO2 Photoreduction by Suppressing H2 Evolution

AbstractConventional strategies for highly efficient and selective CO2 photoreduction focus on the design of catalysts and cocatalysts. In this study, we discover that hydrogen bond network breakdown in reaction system can suppress H2 evolution, thereby improving CO2 photoreduction performance. Photosensitive poly(ionic liquid)s are designed as photocatalysts owing to their strong hydrogen bonding with solvents. The hydrogen bond strength is tuned by solvent composition, thereby effectively regulating H2 evolution (from 0 to 12.6 mmol g−1 h−1). No H2 is detected after hydrogen bond network breakdown with trichloromethane or tetrachloromethane as additives. CO production rate and selectivity increase to 35.4 mmol g−1 h−1 and 98.9 % with trichloromethane, compared with 0.6 mmol g−1 h−1 and 26.2 %, respectively, without trichloromethane. Raman spectroscopy and theoretical calculations confirm that trichloromethane broke the systemic hydrogen bond network and subsequently suppressed H2 evolution. This hydrogen bond network breakdown strategy may be extended to other catalytic reactions involving H2 evolution.

Defect-enriched BiOIO3/Ti3C2 MXene 2D/2D Schottky-type heterostructure for efficient and selective CH4 production via CO2 photoreduction: Unveiling the roles of defect inclusion and Ti3C2 MXene co-catalyst

The photoreduction of CO2 using solar energy to produce energy-efficient fuels is a sustainable technology that addresses energy needs while reducing carbon emissions. However, synthesizing efficient and robust photocatalysts for this process is challenging. This study introduces a viable approach for highly selective CO2 photoreduction to CH4 production by integrating defect-enriched BiOIO3 (DEBI) with a Ti3C2 (TC) MXene co-catalyst, forming an efficient 2D/2D Schottky-type heterostructure. The DEBI, enhanced with precise defect engineering, showed improved light absorption and charge separation efficiency. In tandem, the TC MXene co-catalyst facilitated rapid electron transfer and significantly minimized charge recombination. Consequently, the DEBI/TC-2 heterostructure, with an optimal 2 wt% TC MXene loading, achieved a CH4 yield of 52.8 μmol h−1 g−1, representing a remarkable 20.5- and 6.3-fold increase over pristine BiOIO3 and DEBI, respectively. The Schottky-type 2D/2D heterostructure also demonstrated an impressive apparent quantum yield of 0.72%, 99% CH4 selectivity over H2 generation, and remarkable stability across multiple cycles. This study underscores the synergistic advantages of defect engineering and MXene co-catalyst integration in a single system, proposing a novel direction for designing highly efficient photocatalysts for solar-driven CO2 reduction in energy-efficient fuel production.

Nitrogen Doping-Roused Synergistic Active Sites in Perovskite Enabling Highly Selective CO2 Photoreduction into CH4.

The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 μL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.

Tailoring CuNi heteronuclear diatomic catalysts: Precision in structural design for exceptionally selective CO2 photoreduction to ethanol

Tailoring CuNi heteronuclear diatomic catalysts: Precision in structural design for exceptionally selective CO2 photoreduction to ethanol

Metal–oxygen hybridization in Agcluster/TiO2 for selective CO2 photoreduction to CH4

Selective photocatalytic reduction of CO2 to CH4 is one of the most efficient ways to achieve carbon neutralization. However, the formation of methane remains a challenge due to the slow multiple-proton-coupled electron transfer process and the involvement of various C1 intermediates. Herein, an Agcluster/TiO2 catalyst with Ag-O hybridization was synthesized by supporting Ag clusters on anatase phase TiO2 microspheres for photocatalytic CO2 methanation. The Agcluster/TiO2 sample presents an electron selectivity of 86 % for CH4 production with a yield of 25.25 μmol g–1 h−1. Mechanistic study reveals that Ag clusters accelerate the separation and migration of photogenerated carriers, and enhance the adsorption of CO2. Moreover, the Ag-O hybridization promotes the multiple-proton–electron coupling transfer process by effectively stabilizing intermediates and facilitating *CO hydrogenation to *CHO, resulting in selective CO2 reduction to CH4. This work provides a new insight into the development of selective photocatalytic conversion of CO2 to methane by constructing supported cluster catalysts.

Engineering NH2-Cu-NH2 Triple-atom Sites in Defective MOFs for Selective Overall Photoreduction of CO2 into CH3COCH3.

Selective photoreduction of CO2 to multicarbon products, is an important but challenging task, due to high CO2 activation barriers and insufficient catalytic sites for C-C coupling. Herein, a defect engineering strategy for incorporating copper sites into the connected nodes of defective metal-organic framework UiO-66-NH2 for selective overall photo-reduction of CO2 into acetone. The Cu2+ site in well-modified CuN2O2 units served as a trapping site to capture electrons via efficient electron-hole separation, forming the active Cu+ site for CO2 reduction. Two NH2 groups in CuN2O2 unit adsorb CO2 and cooperated with copper ion to functionalize as a triple atom catalytic site, each interacting with one CO2 molecule to strengthen the binding of *CO intermediate to the catalytic site. The deoxygenated *CO attached to the Cu site interacted with *CH3 fixed at one amino group to form the key intermediate CO*-CH3, which interacted with the third reduction intermediate on another amino group to produce acetone. Our photocatalyst realizes efficient overall CO2 reduction to C3 product acetone CH3COCH3 with an evolution rate of 70.9 μmol gcat -1 h-1 and a selectivity up to 97 % without any adducts, offering a promising avenue for designing triple-atomic sites to producing C3 product from photosynthesis with water.

Boosted Sacrificial-Agent-Free Selective Photoreduction of CO2 to CH3OH by Rhenium Atomically Dispersed on Indium Oxide.

Solar-energy-driven photoreduction of CO2 is promising in alleviating environment burden, but suffers from low efficiency and over-reliance on sacrificial agents. Herein, rhenium (Re) is atomically dispersed in In2O3 to fabricate a 2Re-In2O3 photocatalyst. In sacrificial-agent-free photoreduction of CO2 with H2O, 2Re-In2O3 shows a long-term stable efficiency which is enhanced by 3.5 times than that of pure In2O3 and is also higher than those on Au-In2O3, Ag-In2O3, Cu-In2O3, Ir-In2O3, Ru-In2O3, Rh-In2O3 and Pt-In2O3 photocatalysts. Moreover, carbon-based product of the photoreduction overturns from CO on pure In2O3 to CH3OH on 2Re-In2O3. Re promotes charge separation, H2O dissociation and CO2 activation, thus enhancing photoreduction efficiency of CO2 on 2Re-In2O3. During the photoreduction, CO is a key intermediate. CO prefers to desorption rather than hydrogenation on pure In2O3, as CO binds to pure In2O3 very weakly. Re strengthens the interaction of CO with 2Re-In2O3 by 5.0 times, thus limiting CO desorption but enhancing CO hydrogenation to CH3OH. This could be the origin for photoreduction product overturn from CO on pure In2O3 to CH3OH on 2Re-In2O3. The present work opens a new way to boost sacrificial-agent-free photoreduction of CO2.

Dual plasmonic coupling effect in Bi/vacancy-rich Bi2WO6 heterojunction for selective CO2 photoreduction to CH4

Low-cost plasmonic semiconductors with high density of free carriers have attracted increasing attention in photocatalytic CO2 reduction (PCR), since they display the localized surface plasmon resonance (LSPR) to improve the light-harvesting and produce hot electrons to boost the PCR activity. However, the produced hot electrons in plasmonic semiconductors are easily suppressed to limit the enhancement of the PCR performance. Herein, the dual plasmonic coupling system of Bi nanoparticles/vacancy-rich Bi2WO6 nanosheets (BWO-Vo-Bi) is designed and constructed. An intense plasmonic coupling induced by metal Bi and plasmonic semiconductor of vacancy-rich Bi2WO6 is formed, thus contributing to a strong full-spectrum solar absorption and fast charge transfer in BWO-Vo-Bi heterojunction. The significant enhancement of light absorption and charge movement further accelerates the generation of high-energy hot electrons and extends the lifetime of photogenerated electrons, thereby yielding a high CH4 evolution rate of 20.36 μmol g-1 h−1 with a selectivity of 93.0 % in BWO-Vo-Bi under light irradiation without sacrificial agents, which is 55 times higher than that of Bi2WO6. This work provides a new strategy for the development of high-performance photocatalysts for CO2 reduction through dual plasmonic coupling.

Porous C3N4 nanosheet supported Au single atoms as an efficient catalyst for enhanced photoreduction of CO2 to CO

Artificial photosynthesis utilizing solar energy to convert carbon dioxide (CO2) and water (H2O) into fuels and high-value chemicals offers a promising technology for mitigating energy consumption and environmental pollution. However, the development of efficient photocatalysts with high product selectivity remains a big challenge due to the sluggish dynamic transfer of photogenerated charge carriers. Herein, porous C3N4 nanosheet supported Au single atoms photocatalyst (Au1@CN) with AuN4 coordination is fabricated via a facile “impregnation + freeze-drying” process. The as-synthesized Au1@CN exhibits efficient and stable CO2 photoreduction activity with a CO evolution rate of 0.58 μmol h−1 (amount of catalyst: 10 mg), CO selectivity of 94 %, and a turnover frequency (TOF) of 10.0 h−1 using H2O as the reductant, which exceed most previous works on C3N4-based single-atom photocatalysts for CO2 reduction. Experimental studies and density functional theory (DFT) calculations reveal that the unique Au—N4 coordination promotes the dynamic transfer of photogenerated charge carriers, facilitates the adsorption/activation of CO2 molecules and generation of *COOH intermediate, thereby significantly enhancing the CO2 photoreduction activity with high CO selectivity. This study demonstrates an effective strategy for the design of M—N4 coordinated single-atom catalyst toward efficient and selective photoreduction of CO2 to CO.

From waste to fuel: Metal-free carbon nanodots for selective CO2 photoreduction into methanol

Addressing the major challenge of global warming by implementing a circular carbon cycle involving CO2 conversion is currently an urgent priority for a more sustainable future. The design of efficient, stable, cheap and eco-friendly systems for such purpose is a remarkable challenge. This study reports an unprecedented metal-free, co-catalyst-free orange peel waste–derived carbon nanodot highly active and selective system for the photoreduction of CO2 into methanol. The waste-derived photocatalyst exhibited a maximum methanol production rate of 416.6 µmolMeOH.gcat-1.h−1 and a highly stable methanol production rate of 12.9 µmolMeOH.gcat-1.h−1 after 72 h. This work proposes a successful waste-to-fuel strategy that combines the valorization of orange peel waste and CO2 conversion for the synthesis of green methanol.

Light‐Driven C−C Coupling for Targeted Synthesis of CH3COOH with Nearly 100 % Selectivity from CO2

AbstractTargeted synthesis of acetic acid (CH3COOH) from CO2 photoreduction under mild conditions mainly limits by the kinetic challenge of the C−C coupling. Herein, we utilized doping engineering to build charge‐asymmetrical metal pair sites for boosted C−C coupling, enhancing the activity and selectivity of CO2 photoreduction towards CH3COOH. As a prototype, the Pd doped Co3O4 atomic layers are synthesized, where the established charge‐asymmetrical cobalt pair sites are verified by X‐ray photoelectron spectroscopy and X‐ray absorption near edge spectroscopy spectra. Theoretical calculations not only reveal the charge‐asymmetrical cobalt pair sites caused by Pd atom doping, but also manifest the promoted C−C coupling of double *COOH intermediates through shortening of the coupled C−C bond distance from 1.54 to 1.52 Å and lowering their formation energy barrier from 0.77 to 0.33 eV. Importantly, the decreased reaction energy barrier from the protonation of two*COOH into *CO intermediates for the Pd‐Co3O4 atomic layer slab is 0.49 eV, higher than that of the Co3O4 atomic layer slab (0.41 eV). Therefore, the Pd‐Co3O4 atomic layers exhibit the CH3COOH evolution rate of ca. 13.8 μmol g−1 h−1 with near 100% selectivity, both of which outperform all previously reported single photocatalysts for CO2 photoreduction towards CH3COOH under similar conditions.

Light-Driven C-C Coupling for Targeted Synthesis of CH3 COOH with Nearly 100 % Selectivity from CO2.

Targeted synthesis of acetic acid (CH3 COOH) from CO2 photoreduction under mild conditions mainly limits by the kinetic challenge of the C-C coupling. Herein, we utilized doping engineering to build charge-asymmetrical metal pair sites for boosted C-C coupling, enhancing the activity and selectivity of CO2 photoreduction towards CH3 COOH. As a prototype, the Pd doped Co3 O4 atomic layers are synthesized, where the established charge-asymmetrical cobalt pair sites are verified by X-ray photoelectron spectroscopy and X-ray absorption near edge spectroscopy spectra. Theoretical calculations not only reveal the charge-asymmetrical cobalt pair sites caused by Pd atom doping, but also manifest the promoted C-C coupling of double *COOH intermediates through shortening of the coupled C-C bond distance from 1.54 to 1.52 Å and lowering their formation energy barrier from 0.77 to 0.33 eV. Importantly, the decreased reaction energy barrier from the protonation of two*COOH into *CO intermediates for the Pd-Co3 O4 atomic layer slab is 0.49 eV, higher than that of the Co3 O4 atomic layer slab (0.41 eV). Therefore, the Pd-Co3 O4 atomic layers exhibit the CH3 COOH evolution rate of ca. 13.8 μmol g-1 h-1 with near 100% selectivity, both of which outperform all previously reported single photocatalysts for CO2 photoreduction towards CH3 COOH under similar conditions.

Selective CO2 Photoreduction Enabled by Water-stable Cu-based Metal-organic Framework Nanoribbons.

The goal of photocatalytic CO2 reduction system is to achieve near 100 % selectivity for the desirable product with reasonably high yield and stability. Here, two-dimensional metal-organic frameworks are constructed with abundant and uniform monometallic active sites, aiming to be an emerged platform for efficient and selective CO2 reduction. As an example, water-stable Cu-based metal-organic framework nanoribbons with coordinatively unsaturated single CuII sites are first fabricated, evidenced by X-ray diffraction patterns and X-ray absorption spectroscopy. In situ Fourier-transform infrared spectra and Gibbs free energy calculations unravel the formation of the key intermediate COOH* and CO* is an exothermic and spontaneous process, whereas the competitive hydrogen evolution reaction is endothermic and non-spontaneous, which accounts for the selective CO2 reduction. As a result, in an aqueous solution containing 1 mol L-1 KHCO3 and without any sacrifice reagent, the water-stable Cu-based metal-organic framework nanoribbons exhibited an average CO yield of 82 μmol g-1 h-1 with the selectivity up to 97 % during 72 h cycling test, which is comparable to other reported photocatalysts under similar conditions.