Selective Oxidation Of Alcohols Research Articles

Bases Tuning Selective Aerobic Oxidation of Benzyl Alcohol to Benzaldehyde Catalyzed by Cu2+/TEMPO

Bases Tuning Selective Aerobic Oxidation of Benzyl Alcohol to Benzaldehyde Catalyzed by Cu2+/TEMPO

Efficient and selective oxidation of alcohols and hydrocarbons catalyzed by oxovanadium(IV) unsymmetrical salophen complex supported on silica-coated CoFe2O4 magnetic nanoparticles

Efficient and selective oxidation of alcohols and hydrocarbons catalyzed by oxovanadium(IV) unsymmetrical salophen complex supported on silica-coated CoFe2O4 magnetic nanoparticles

Selective Oxidation of Alcohols to Carbonyls Under Decatungstate-Mediated Photoelectrochemical Conditions.

The oxidation of alcohols to the corresponding carbonyl derivatives has been realized under photoelectrochemical conditions in the presence of tetrabutylammonium decatungstate (TBADT) as the homogeneous photocatalyst. The protocol can be applied to both primary and secondary, benzylic and aliphatic alcohols. The desired products are obtained selectively, skipping the need for purposely added chemical oxidants. An in-depth study of photoelectrochemical conditions revealed that the protocol works best under amperostatic conditions in an undivided electrochemical cell irradiated with a 390 nm LED lamp. The comparison with analogous electrochemical and chemical oxidant-promoted photocatalytic transformations demonstrates the superior efficiency and selectivity of the hereby reported photoelectrochemical conditions.

Selective oxidation of benzyl alcohol to benzaldehyde using sustainable catalysts: An overview

Selective oxidation of benzyl alcohol to benzaldehyde using sustainable catalysts: An overview

Deciphering the mass transfer and diffusion behavior in the oxidation of fatty alcohols to fatty acids over Pt/MCM-41

Selective oxidation of long-chain fatty alcohols into acids is an important value-added reaction. However, exploring the basic catalytic steps over Pt-based catalysts throughout the entire oxidation process is still ambiguous. In this work, we systematically investigated the synergistic mechanisms of adsorption, reaction, and diffusion over Pt/MCM-41 for normal/isomeric alcohols oxidation into acids via molecular dynamics, in-situ characterization, and experiments. Specifically, diffusion coefficients decrease with the increase of the molecular weight of normal molecules due to the increased van der Waals forces, while isomeric alcohols exhibit more complex patterns originated from the steric hindrance between Pt particles and mesopores. To quantitatively describe this pattern, a cluster size descriptor of dPt0.75×dPore0.25 was defined. Notably, 2-ethylhexanol exhibits the best self-diffusion coefficients at the descriptor value of 3.14. Correspondingly, the oxidation of 2-ethylhexanol to 2-ethylhexanoic acid displays highest reaction conversion (68.67 %) and selectivity (65.59 %).

Efficient and selective photocatalytic oxidation of benzylic alcohols with built-in electric field CsPbBr3/SiO2 nanocomposites through Fe3+ gradient doping

Lead halide perovskite nanocrystals (PNCs) have emerged as promising materials for photocatalysis due to their exceptional optoelectronic properties, yet achieving efficient charge separation and selective oxidation reactions remains a significant challenge. In this study, we report the synthesis of Fe3+-doped CsPbBr3/SiO2 nanocomposites (Fe-PNCs/SNPs) with gradient energy levels, designed to enhance photocatalytic performance. Our results demonstrate that Fe3+ doping introduces mid-gap states, promotes photoinduced charge separation, and generates reactive oxygen species (ROS) such as O2− and OH radicals under sunlight-simulating light irradiation from a 300 W Xe arc lamp. The Fe20-PNCs/SNPs catalyst achieved over 99 % conversion of benzyl alcohol to benzaldehyde with high selectivity and stability in the ethanol under ambient conditions. Additionally, the catalyst exhibited excellent recyclability and broad substrate tolerance. These findings highlight the innovative design of gradient energy levels in perovskite nanocomposites, offering a new strategy for enhancing photocatalytic efficiency in selective organic transformations.

Unleashing the synergistic potential of 2D-2D nanosheet based S-scheme heterojunction: Cooperative boosting of CO2 reduction to solar fuel and biomass valorization.

Harnessing inexhaustible solar energy for CO2 valorization is substantial step toward achieving carbon-neutral energy cycle. However, CO2 conversion often exhibits slow kinetics, necessitating the utilization of sacrificial agents making the process economically unfeasible. In the ongoing quest for sustainable and economically feasible CO2 valorization, herein the photoreduction of CO2 to CO coupled with biomass-based alcohol oxidation to fine chemicals is reported via Bi2WO6/g-C3N4 (BWO/g-CN) 2D-2D nanosheet based S-scheme heterojunction. Importantly, BWO/g-CN-60 exhibits highest photocatalytic activity with CO production rate of 6.87 mmol g-1 h-1, accompanied by >98% selectivity and selective oxidation of veratryl alcohol to veratraldehyde, with notable yield of 42% in 6 h under simulated solar light. The apparent quantum yield (AQY) of 14.3% is achieved for CO production at the wavelength of 420 nm. Additionally, the formed heterostructure results in enhanced charge separation and accelerated charge transfer kinetics as validated by PL, EIS, and photocurrent studies. EPR, 13CO2 labeling, DFT studies, and various controlled experiments provided deeper insight into the mechanism of underlying photo-redox process. Thus, the current study presents a sustainable paradigm for CO2 mitigation by converting it into solar fuel, while synergistically producing the fine chemicals through effectively harnessing the full potential of charge carriers.

Aerobic Oxidation of Vanillyl Alcohol to Vanillin Over CeO2‐Co3O4 Catalyst

AbstractA promising CeO2‐Co3O4 (9 : 1 mole ratio based on oxides) non‐noble metal based mixed oxide catalyst was explored for selective oxidation of vanillyl alcohol with molecular oxygen to produce vanillin under atmosphere pressure. In particular, to enhance its efficiency, this catalyst was prepared by adopting different preparation methods namely, template assisted, coprecipitation with and without surfactant, wet‐impregnation, and solution combustion. The prepared catalysts were characterized by XRD, Raman, BET surface area, ICP‐OES, FE‐SEM, HR‐TEM, H2‐TPR, and XPS. Among various catalysts investigated, the template assisted synthesized catalyst exhibited superior activity (100 % conversion and selectivity) and high stability. The better activity of this catalyst was found to be due to reduced crystallite size, high specific surface area (92 m2/g), more surface oxygen, and improved redox behaviour as confirmed from XRD, BET surface area, XPS, and H2‐TPR analysis, respectively. The stability of the catalyst was tested by reusability test and was observed that there is not much decrease in the catalytic activity up to five cycles. Further, the catalytic activity was optimized by varying the reaction parameters such as time, solvent, temperature, and catalyst weight.

Selective and fast oxidation of alcohol to aldehyde using novel catalytic deep eutectic solvent surfactants.

Deep eutectic solvent (DES) has been considered as a useful catalyst and reaction medium for various organic transformations. Herein, we report the catalytic application of novel deep eutectic solvent- based surfactant (DES surfactant) for the selective and fast oxidation of alcohols to aldehydes. The readily accessible DES surfactants (FeCl3/BHDC) was prepared using inexpensive ferric chloride (FeCl3) and benzyl hexadecyl dimethyl ammonium chloride in a simple manner. The synthesized FeCl3/BHDC was characterized using various techniques, including, FTIR spectroscopy, thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), and energy- dispersive X-ray spectroscopy (EDS) to determine its structure. The catalytic activity of FeCl3/BHDC in the selective oxidation of various alcohols to corresponding aldehyde derivative was investigated. The results showed the reaction could be completed within very short reaction times ranging from 2 to 15min, while achieving good to excellent yields. This protocol offers a facile strategy and excellent efficiency in selectively oxidizing various alcohol derivatives to their respective aldehydes and ketones, utilizing hydrogen peroxide in the presence of catalytic DES surfactant.

Selective oxidation of benzyl alcohols photocatalyzed by asymmetric cobalt thioporphyrazine supported on alumina

The sunlight-powered transformation of alcohols to corresponding carboxylic acids offers a feasible route for fine chemical synthesis. In this work, the asymmetric cobalt tri(2,3-bis(butylthio)maleonitrile)-(1,4-dithiin) porphyrazine (CoPz(SBu)6(dtn)) was synthesized, more importantly, its single crystal was further obtained by the solvent evaporation method. Then the asymmetric CoPz(SBu)6(dtn) supported on neutral Al2O3 particles to form composite photocatalyst CoPz(SBu)6(dtn)@Al2O3, which possessed strong visible light absorption. Under simulated sunlight irradiation using a xenon lamp, the composite photocatalyst CoPz(SBu)6(dtn)@Al2O3 exhibited excellent photocatalytic activity for selective oxidation of benzyl alcohol to benzoic acid in water under conditions of green H2O2 as oxidant and K2CO3 as additive. The conversion of benzyl alcohol was up to 53.8 % together with 99 % selectivity of benzoic acid over composite photocatalyst CoPz(SBu)6(dtn)@Al2O3. Meanwhile, this photocatalytic system had feasible substrate generalizability and excellent photocatalytic activity for substituted benzyl alcohols containing both electron-donating and electron-withdrawing substituents. The composite photocatalyst CoPz(SBu)6(dtn)@Al2O3 exhibited excellent photocatalytic durability, which was confirmed by the recycling experiments. This work manifests the asymmetric thioporphyrazine as photocatalyst is feasible in implementing sunlight-powered selective transformation.

Terpyridine Ni(II) Complex Grafted CdS Nanorods for Cooperative Selective Benzyl Alcohol Oxidation and Hydrogen Production.

Efficient utilization of photogenerated charge carriers to realize photocatalytic solar fuel production and oxidative chemical synthesis is a challenging task. Herein, a conventional amidation reaction route is adopted to successfully construct a novel composite photocatalyst composed of a Ni(II)-terpyridine complex with carboxyl groups grafted on CdS nanorods (labeled as CdS@Ni(terpyC)2). Experimental results have unequivocally revealed that the as-fabricated composite catalyst exhibited a remarkable enhancement in photocatalytic activity for the dehydrogenation of benzyl alcohol under visible light, demonstrating superior hydrogen evolution efficiency and benzaldehyde selectivity, surpassing both pristine CdS and the blend of CdS and Ni(terpyC)2. The carrier dynamics study demonstrated that the Ni(terpyC)2 on the surface of CdS could quickly extract the photogenerated electrons of CdS, which reduced the carrier recombination efficiency, further improving the photocatalytic activity of the catalyst. This work illustrates the effect of surface active site engineering on photocatalysis and is expected to shed substantial inspiration on future surface modulation and design of semiconductor photocatalysts.

Design of TiO2-X nanotubes with controllable oxygen vacancy concentration and performance study of selective oxidation of benzyl alcohol

Design of TiO2-X nanotubes with controllable oxygen vacancy concentration and performance study of selective oxidation of benzyl alcohol

Cu(II) Coordination Polymers for the Selective Oxidation of Biomass-Derived Veratryl Alcohol in Green Solvents: A Sustainable Catalytic Approach.

Four air-stable one-dimensional copper(II) coordination polymers (CP1-CP4) with azide linkers were synthesized using tridentate NNS and NNN ligands. Single-crystal X-ray diffraction (XRD) analysis confirmed the molecular structures of CP1, CP3, and CP4. In the presence of TEMPO, all four coordination polymers demonstrated effective catalytic activity for the selective aerobic oxidation of veratryl alcohol, a biomass model compound, under base-free conditions. CP4 exhibited the best catalytic efficiency. Oxidations were conducted at ambient temperature (40 °C) utilizing air as a sustainable oxidant. Selective oxidation of veratryl alcohol to veratraldehyde was also conducted in the presence of a catalytic amount of base (5 mol %), and enhanced reactivity was observed. The green solvents, acetone, and water, were used to maximize sustainability. The optimized reaction conditions were applied to broaden the substrate scope of various lignin model alcohols and substituted benzylic alcohols with wide electronic variability. CP4 exhibited high recyclability, consistently providing quantitative yields even after ten consecutive runs. The catalytic protocol demonstrated sustainability and environmental compatibility, as evidenced by a low E-factor (4.29) and a high Eco-scale score (90). Based on experimental evidence and theoretical calculations, a plausible catalytic cycle was proposed. Finally, the sustainability credentials of the different optimized reaction protocols were evaluated using the CHEM21 green metrics toolkit.

In situ-generated mononuclear half-sandwich [(η6‐p‐cymene)RuCl(amide)] complexes as efficient catalysts in the selective oxidation of benzyl alcohol to benzaldehyde

The application of in situ-generated mononuclear Ru(II)-organometallic complexes (1–7) i.e., [(η6-p-cymene)RuCl(L)], produced by the interaction of Ru dimer [(p-cymene)RuCl2]2 with some polyfunctional amide ligands(L) as highly efficient catalystsin the oxidation of various benzyl alcohols (B-OLs) by tert-butyl hydroperoxide (TBHP) oxidant to produce selectively the benzaldehydes (B-ALs) in high yields in CH3CN is described. The in situ-generated catalysts were found to be highly active than the [(p-cymene)RuCl2]2 precursor (dimer) in the oxidation of B-OL to B-AL. The influence of various reaction parameters such as type of catalyst, reaction temperature, oxidant and solvent during the B-OL oxidation was systematically monitored to optimize the catalytic conditions. In order to confirm the formation of predicted in situ-generated mononuclear Ru(II) complex catalysts during the oxidation of B-OL, one of the Ru(II) complex (1) was synthesized and characterized by Elemental analysis (EA), Infrared (IR), Proton-NMR and Mass spectral techniques and its mono nuclear structure is proposed. Further, it was observed that the activity of in-situ generated and pre-synthesized Ru(II) catalyst was almost same in the oxidation of B-OL to B-AL.

Synthesis of 2,3-diazido-2,3-dideoxy-β-d-mannosides and 2,3-diazido-2,3-dideoxy-β-d-mannuronic acid via stereoselective anomeric O-alkylation

Stereoselective synthesis of 2,3-diazido-2,3-dideoxy-β-d-mannosides has been accomplished via Cs2CO3-mediated anomeric O-alkylation of 2,3-diazido-2,3-dideoxy-β-d-mannoses with primary electrophiles. Selective oxidation of the C6 primary alcohol of the 2,3-diazido-2,3-dideoxy-β-d-mannoside successfully produced corresponding 2,3-diazido-2,3-dideoxy-β-d-mannuronic acid.

Investigation of the Properties of Unsaturated Allyl Alcohol and its Oxidation Reaction Products

Abstract Organic substances in which the -OH group is directly attached to the carbon atom are called alcohols. Unsaturated alcohols are obtained by replacing the hydrogen of ethylene or acetylene-type compounds with a hydroxyl group. Allyl alcohol, the first representative of the class of unsaturated alcohols, contains oxygen. Allyl alcohol is used in optical resins, protective glasses, paints and coatings and polymer cross-linking agents, as well as in the production of pharmaceuticals, organic chemicals, plastics, herbicides, and pesticides. In organic chemistry, alcohols can be oxidized to aldehydes, ketones, carboxylic acids, and esters that carry a higher oxidation state of carbon. Therefore, the selective oxidation of alcohols is an important issue. The properties and selective oxidation reaction of allyl alcohol were investigated in the presented work.

Nitrogen-doped mesoporous carbon as metal-free catalysts for the aerobic oxidation of alcohols

The selective oxidation of alcohols to carbonyl compounds is a crucial reaction in organic chemistry. In this study, we report the synthesis of nitrogen-doped mesoporous carbon material by hard template method using biomass derivative sucrose and melamine as carbon and nitrogen sources and silica sol as template agent. Using molecular oxygen as the oxidant, the obtained NC-900 exhibits excellent selectivity in the oxidation of primary alcohols to the corresponding aldehydes without generating over-oxidized acid. For example, under optimal reaction conditions, 4-methoxybenzyl alcohol is almost quantitatively converted to 4-methoxybenzaldehyde. The catalytic system showed robust tolerance to sensitive functional groups and demonstrated favorable reaction effects in gram-scale experiments and multi-step, one-pot reaction sequences. The catalyst was reused for 5 times, and its catalytic activity did not decrease significantly. Hammett correlation studies indicated that the reaction favored substrates with electron-donating substituents. Characterization and experimental results indicate that the synergistic effect of graphitic N and mesoporous structure plays a pivotal role in enhancing the catalytic activity of NC-900 in this transformation. The mechanism study shows that the reaction involves free radical process.

Gold supported on Bi2MoO6 based on oxygen vacancy structure: Enhanced adsorption activation for efficient photocatalytic selective oxidation of benzyl alcohol

In this work, ethylene glycol was used as a mild reducing agent to prepare Bi2MoO6 support with oxygen vacancies. By introducing Au active species, an Au/BMO-Ov (Bi2MoO6 support with oxygen vacancies) photocatalyst was synthesized, which was co-modified with oxygen vacancies and Au NPs (nanoparticles), and significantly improved the capability of Bi2MoO6 for visible light-driven BA (benzyl alcohol) conversion. The 1 wt% Au/BMO-Ov exhibited the highest conversion (98.8 %) of BA and excellent selectivity (97.4 %) of BAD (benzaldehyde) under visible light. Oxygen vacancies have an inhibitory effect on the recombination of photogenerated carriers. Au NPs acted as both photosensitizers (LSPR effect captures light and generates electrons and holes) and active species (used as Lewis acids). The results of photoelectrochemistry (PEC) tests confirmed that the synergistic interaction of Au and oxygen vacancies enhanced the photoactivity of bismuth molybdate. Meanwhile, density functional theory (DFT) calculations indicated that oxygen vacancies and Au synergistically reduced the bandgap energy of Bi2MoO6 and enhanced the adsorption of BA. Au served as the Lewis acid site for adsorption of BA, and improved the reactivity of light-driven BA conversion. The corresponding mechanism was proposed based on the experimental results and DFT calculations.

Solar Selective Photooxidation of Veratryl Alcohol by Suppression of Reactive Oxygen Species Through Band Modulation in the BiOI/Bi4Ti3O12 Heterojunction.

Lignin valorization through heterogeneous photocatalysis is a promising pathway for obtaining value-added products, including chemical building blocks, biofuels, etc. However, several challenges still demand attention and resolution in this field. One of the key parameters in the heterogeneous photocatalytic process is the synthesis of efficient photocatalysts that can accomplish efficient and selective reactions. Selective conversion of lignin can be achieved by using heterojunction photocatalysts which can efficiently separate charge carriers' and promote selective reactions by band structure modulation. This work details a straightforward approach for synthesizing heterojunction photocatalysts based onBi4Ti3O12and BiOI involving the hydrothermal and co-precipitation methods. Additionally, the synthesized composites were employed in the selective oxidation of veratryl alcohol, a lignin-derived model compound, to produce high-value-added veratraldehyde. The experimental results showed that the BiOI/Bi4Ti3O12heterojunction (12.5 mol %BiOI)showedsuperior activity with a veratraldehyde yield of 5.4 and 27.2 times higher than those of Bi4Ti3O12and BiOI, respectively. The mechanistic studies revealed that the improved activity and selectivity were due to the enhanced charge carriers' separation and the suppression of reactive oxygen species formation through modulation of band structure. This study allows a green approach to lignin-derived biomass valorization to obtain high-value chemicals.

Investigation into the role of MoS2 in the composite of Cu-Cu2O/MoS2 in catalytic aerobic oxidation of benzylic alcohols

Cuprous oxide (Cu2O), as a common transition metal semiconductor material, has found extensive applications and research in the field of catalysis due to its unique physicochemical properties. To improve its catalytic performance, introducing carriers to form composite materials with Cu2O has proven to be a promising strategy for enhancing its stability, activity, and selectivity. In this study, we introduced MoS2 to form a composite material with Cu-Cu2O, investigating the impact of MoS2 on the activity of Cu-Cu2O in selective alcohol oxidation. The results demonstrate a significant improvement in the catalytic activity of Cu-Cu2O upon the introduction of MoS2. Further investigations substantiate the close correlation between the enhanced activity of Cu-Cu2O and the interaction with thin layered MoS2 flakes. The quantity of the thin layered MoS2 is small but its impact on the catalytic activity is significant. It induces changes in the band and electronic structures of Cu-Cu2O, and the changes facilitate the activation of O2 and electron transfer in the oxidation, and thus promote the catalysis.