Selective Oxidation Of Alcohols Research Articles

Solid-State Oxidation of Alcohols in Gold-Coated Milling Vessels via Direct Mechanocatalysis.

This paper presents a novel approach for the selective oxidation of alcohols to their corresponding aldehydes through direct mechanocatalysis, employing a gold-coated milling vessel as catalyst and air as the oxidation agent. By adjusting milling frequency, media, and duration, high catalytic efficiencies and selectivities are achieved. Remarkably, yields of up to 99% are obtained for specific substrates, with a turnover number (TON) of 8200 and a turnover frequency (TOF) of 0.77 s-1, surpassing existing alternatives. Confirmation of the catalytic reaction indeed occurring on the milling tool surface was achieved through X-ray photoelectron spectroscopy (XPS).

Solid‐State Oxidation of Alcohols in Gold‐Coated Milling Vessels via Direct Mechanocatalysis

This paper presents a novel approach for the selective oxidation of alcohols to their corresponding aldehydes through direct mechanocatalysis, employing a gold‐coated milling vessel as catalyst and air as the oxidation agent. By adjusting milling frequency, media, and duration, high catalytic efficiencies and selectivities are achieved. Remarkably, yields of up to 99% are obtained for specific substrates, with a turnover number (TON) of 8200 and a turnover frequency (TOF) of 0.77 s‐1, surpassing existing alternatives. Confirmation of the catalytic reaction indeed occurring on the milling tool surface was achieved through X‐ray photoelectron spectroscopy (XPS).

Selective Oxidations of Toluenes and Benzyl Alcohols by an Unspecific Peroxygenase (UPO)

Unspecific Peroxygenases (UPOs) have emerged as robust biocatalysts for selective oxygenation reactions, as they are easily produced at scale and require only hydrogen peroxide as the external oxidant. UPOs can catalyze the oxygenation of the primary benzylic carbons of toluenes to give alcohol, aldehyde and carboxylic acid products. They can also catalyze hydroxylation at the benzylic position of ethylbenzenes, and the subsequent oxidation of the secondary alcohols to ketones. In this study, we have investigated factors that affect the balance of products in UPO‐catalyzed benzylic oxygenations using a range of functionalised toluenes and ethyl benzenes, and a UPO from Agrocybe aegerita (rAaeUPO‐PaDa‐I‐H variant). The product distribution is dependent upon a mixture of steric and electronic effects and, in selected cases, controlling the reaction conditions permits products from each product series to be generated chemoselectively. In this way, electron poor toluenes were converted directly into carboxylic acids in isolated yields of 36–99% on preparative scale.

Impact of Ceria Support Morphology on Au Single‐Atom Catalysts for Benzyl Alcohol Selective Oxidation

AbstractAlcohol oxidations are a key industrial chemical transformation, with aldehydes and ketones finding use in an array of applications. Nobel metals are known for their activity towards this chemoselective transformation, however, sustainable catalyst synthesis requires optimal utilisation of these scarce elements. Here, we report Au catalytic systems based on the deposition of isolated Au sites on different morphologies of ceria in which different surface facets of the support are exposed. Through tailoring the support morphology and from extensive catalyst characterisation, it is shown that the exposed facet is critical for controlling the formation (or not) of isolated Au sites. Both the 110 and 111 facets are capable of this feat, yielding single‐atom sites for rod, octahedron, and polyhedron morphologies. In contrast, the 100 facet is not, resulting in Au nanoparticles on cubic ceria. This dictation over Au species is critical to benzyl alcohol oxidation capacity at mild conditions and in the absence of a soluble base, with only single‐atom catalyst (SAC) systems demonstrating activity. Furthermore, the exposed surface facet also governs the degree of surface oxygen vacancies, which is critical to catalyst activity due to their control over substrate adsorption strength, as revealed through T1/T2 NMR relaxation measurements.

Heterogeneous Organocatalysts for Light-Driven Reactions in Continuous Flow.

Within the realm of organic synthesis, photocatalysis has blossomed since the beginning of the last decade. A plethora of classical reactivities, such as selective oxidation of alcohol and amines, redox radical formation of reactive species in situ, and indirect activation of an organic substrate for cycloaddition by EnT, have been revised in a milder and more sustainable fashion via photocatalysis. However, even though the spark of creativity leads scientists to explore new reactions and reactivities, the urgency of replacing the toxic and critical metals that are involved as catalysts has encouraged chemists to find alternatives in the branch of science called organocatalysis. Unfortunately, replacing metal catalysts with organic analogues can be too expensive sometimes; however, this drawback can be solved by the reutilization of the catalyst if it is heterogeneous. The aim of this review is to present the recent works in the field of heterogeneous photocatalysis, applied to organic synthesis, enabled by continuous flow. In detail, among the heterogeneous catalysts, g-CN, polymeric photoactive materials, and supported molecular catalysts have been discussed within their specific sections, rather than focusing on the types of reactions.

Construction of a Dual-Function Mo-ZIS@Ti for Photocatalytic Benzyl Alcohol Oxidation and Hydrogen Evolution Performance.

The photocatalytic oxidation of benzyl alcohol and the simultaneous evolution of hydrogen from water are efficient dual-optimal routes. It is important to develop composite catalysts that combine redox properties and facilitate electron-hole separation and transport. Herein, the bimetallic-doped Mo-ZIS@Ti photocatalyst was designed and synthesized, and the selective oxidation of benzyl alcohol and hydrogen evolution by water splitting was realized at the same time. Under visible light irradiation, benzyl alcohol was completely converted with more than 99% selectivity for benzaldehyde, and the H2 production rate was 5.6 times higher than the initial ZIS. The exceptional catalytic performance was ascribed to utilizing Ti-MIL-125 as a precursor, wherein slowly releasing-doped Ti formed robust Ti-S bonds that quickly transfer electrons and reduce sites. Meanwhile, doping Mo effectively captures photogenerated holes and acts as active sites for oxidation reactions. Both experimental characterization and work function calculations demonstrate that the bimetallic synergism effectively modulates the electronic structure of ZIS, promotes the directional separation of electrons and holes, and significantly improves the photoactivity and stability of ZIS. This work contributes a route to obtain benzaldehyde and green hydrogen at the same time and also gives new insights for the construction and mechanism study of bimetallic-doping catalysts.

Hollow heterojunction with dual-vacancy engineering to boost photocatalytic performance for photoreduction of CO2 coupled with selective oxidation of benzyl alcohol to benzaldehyde

CO2 photoreduction into chemical fuels is hopeful and sustainable for a carbon–neutral future. Herein, a bifunctional dual-vacancy-modified hollow heterojunction photocatalyst is ingeniously designed for CO2 photoreduction to CO coupling with selective oxidation of benzyl alcohol to benzaldehyde. Synergistic catalysis effect resulted from hollow heterostructures, TiO2 with O vacancies (TiO2-x) and Zn0.3-xCd0.7S with Zn vacancies (ZCS) leads to excellent photoreduction and photoxidation performances. The optimized sample (TiO2-x/ZCS hollow sphere) exhibits highest photocatalytic activity of all the obtained samples. The yields of CO and benzaldehyde are 105 and 323.5 μmol g–1h−1, respectively. The construction of Z-scheme heterojunction realizes the spatial separation of redox reaction sites, and the dual-vacancy distributed on the heterojunction enhance the interfacial reactivity. Additionally, density functional theory calculation and in-situ technology reveal that Zn vacancy in ZCS and O vacancy in TiO2-x function as active sites for the binding and activation of *COOH and *PhCH2O-, respectively, thereby stabilizing the crucial step in the formation of intermediates such as CO and benzaldehyde. This work enhances the utilization of photogenerated carrier, and affords a new opportunity to design hollow heterojunction with dual-vacancy engineering to boost photocatalytic performance for coupling reaction system.

Ultrathin Ru/CdIn2S4 nanosheets for simultaneous photocatalytic green hydrogen production and selective oxidation of furfuryl alcohol to furfural

Biomass is an important sustainable carbon source and converting biomass intermediates into value-added chemicals/fuels using a green technology is a promising sustainable pathway. Dual functional photocatalysis can be used to “hit two birds with one stone” via the simultaneous production of H2 and valorisation of the biomass intermediates. CdIn2S4 (CIS), is an exciting photocatalytic material because of its high visible light harvesting capacity. Herein, ultrathin CIS nanosheets were fabricated via a solvothermal method with in situ deposition of Ru (Ru-CIS). The photocatalytic performance of Ru-CIS toward the selective oxidation of furfuryl alcohol (FOH, a biomass intermediate), to a value-added product (Furfural, FCHO) with concurrent generation of hydrogen was investigated. Ru incorporation resulted in up to 50-fold enhancement in hydrogen production rate and higher FOH to FCHO conversion% and selectivity%. This enhancement was attributed to the enhanced charge separation due to the incorporated Ru species as supported by density functional theory (DFT) calculations.

TEMPO-Grafted Polystyrene/Polymethacrylate Organosiloxane Janus Nanohybrids as Efficient Pickering Interfacial Catalyst for Selective Aerobic Oxidation of Cinnamyl Alcohol.

The novel 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) groups immobilized on functional polymers or nanoparticles emerged as potential Pickering interfacial catalysts (PICs) for effective catalysis in biphasic systems. In this study, a snowman-shaped Janus-structured polymer with TEMPO-anchored nanohybrid particles (SM-JPP-TEMPO) was prepared and employed as a potential PIC in the Anelli-Montanari system for the selective oxidation of alcohol. The amphiphilic character of SM-JPP-TEMPO particles plays a dual role as an emulsifier and catalyst in the Pickering emulsion. As a result, it enables smaller droplets (102 μm) at the water-in-oil (W/O) interface and reduces the interfacial tension from 26.58 to 17.38 mN/m, which improves the stability of the Pickering emulsion system. This constructed Pickering emulsion microreactor offers a larger interface contact area and shortens the mass transfer distance of the substrate of cinnamyl alcohol, which significantly enhances the catalytic conversion at the Anelli-Montanari oxidation system, thus achieving remarkable conversion efficiency of (92.3%) with excellent selectivity (99%) in static (stirring-free) condition. It was found that the Janus nanohybrid catalyst (SM-JPP-TEMPO) enhanced 1.29-fold catalytic efficiency compared to the TEMPO grafted spherical polystyrene nanoparticle (PS-NPs-TEMPO) catalyst (72%). Moreover, after seven consecutive cycles, the Janus nanocatalyst (SM-JPP-TEMPO) maintained the conversion significantly. Hence, these results collectively highlight that the amphiphilic SM-JPP-TEMPO catalyst provides an efficient and eco-friendly strategy for the intensification of liquid-liquid biphasic reaction systems for potential applications in industries.

Photocatalytic (V2O5/TiO2) Blue LED mediated Selective oxidation of alcohols, Styrene to Aldehydes, and Oxygenation of alkyl‐benzene to Ketones

The development of a low‐cost, reusable, and sustainable approach is a difficult and emerging demand in the coming arena. Here, we demonstrate the selective oxidation of primary alcohol, styrene to aldehyde, and alkyl benzene to appropriate ketone, under Blue LED irradiation. The developed approaches employ reusable catalysts (V2O5/TIO2) and green solvents (ACN, H2O) at room temperature. The substrate scope is widely investigated for various compounds of different functionalities. Organic transformations are supported by reaction mechanistic studies. The gram scale reaction and catalytic recyclability were also carried out to maximize the protocol’s synthetic utility.

Understanding contributions of zeolite surface hydroxyl groups over Au/USY in selective oxidation of aromatic alcohols

Metal-zeolites catalysts are of great importance in selective organic conversions. Zeolites possess features of highly-ordered porous network, adjustable acidic properties (Brønsted/Lewis), spatial nanoconfinement effects, unique shape selectivity and the strong (hydrothermal-) stability. The role of zeolite hydroxyl (z-OH) groups, such as bridging ones in Si-O(H)-Al (B acids) and terminal ones in Al-OH and Si-OH (silanols), in catalysis is an interesting topic, particularly when they are not catalytic active sites, while they affect the catalytic performances. This study comprehensively investigated series of Au/USY catalysts in the selective oxidation of benzyl alcohol to benzaldehyde and clarified the dominating contributions of Al-associated z-OH groups to affecting catalytic conversions and selectivity via altering the Si/Al ratio and reducing z-OH groups by amorphous silica species derived from diethoxydimethylsilane under high-temperature calcination. The catalysts were characterized by XRD, BET, TEM, XPS, UV/Vis, FT-IR and in-situ DRIFT to investigate crystal structures, textural properties, morphologies, size distribution, chemical state of gold, acidity, and adsorptive properties. The experimental results proved that zeolites with a higher amount of z-OH groups tuned by Si/Al ratios or by diethoxydimethylsilane silylation exhibited higher catalytic activity because of the adsorption effect. Finally, a possible mechanism was discussed based on the experimental results and literature.

A binary dumbbell visible light driven photocatalyst for simultaneous hydrogen production with the selective oxidation of benzyl alcohol to benzaldehyde

Photocatalytic H2 production with selective oxidation of organic moieties in an aqueous medium is a fascinating research area. However, the rational design of photocatalysts and their photocatalytic performance are still inadequate. In this work, we efficiently synthesized the MoS2 tipped CdS nanowires (NWs) photocatalyst using soft templates via the two-step hydrothermal method for efficient H2 production with selective oxidation of benzyl alcohol (BO) under visible light illumination. The optimized MoS2 tipped CdS NWs (20 % MoS2) photocatalyst exhibits the highest photocatalytic H2 production efficiency of 13.55 mmol g−1 h−1 with 99 % selective oxidation of BO, which was 42.34 and 2.21 times greater photocatalytic performance than that of pristine CdS NWs and MoS2/CdS NWs, respectively. The directional loading of MoS2 at the tips of CdS NWs (as compared to nondirectional MoS2 at CdS NWs) is the key factor towards superior H2 production with 99 % selective oxidation of BO and has an inhibitory effect on the photo corrosion of pristine CdS NWs. Therefore, the amazing enhancement in the photocatalytic performance and selectivity of optimized MoS2 tipped CdS NWs (20 % MoS2) photocatalyst is due to the spatial separation of their photoexcited charge carriers through the Schottky junction. Moreover, the unique structure of the MoS2 flower at the tip of 1D CdS NWs offers separate active sites for adsorption and surface reactions such as H2 production at the MoS2 flower (confirmed by Pt photo deposition) and subsequently the selective oxidation of BO at the stem of CdS NWs. This rational design of a photocatalyst could be an inspiring work for the further development of an efficient photocatalytic system for H2 production with selective oxidation of BO (a strategy of mashing two potatoes with one fork).

Dihalosalicylaldehyde based molybdenum(VI) complexes: Synthesis, spectral characterization, crystal structures, and catalytic activities for the selective oxidation of benzylic alcohols

Three ONO donor Schiff base ligands were obtained by the condensation of 3,5-dihalosalicylaldehydes with nicotinoylhydrazide (H2Cl2SN: (E)-N'-(3,5-dichlorosalicylaldehyde) nicotinoylhydrazone, H2Br2SN: (E)-N'-(3,5-dibromosalicylaldehyde) nicotinoylhydrazone, and H2I2SN: (E)-N'-(3,5-diiodosalicylaldehyde) nicotinoylhydrazone on refluxing in ethanol. The treatment of [MoO2(acac)2] (acac = acetylacetonato) with these ligands in methanol afforded cis-dioxidomolybdenum(VI) complexes [MoO2(Cl2SN)(CH3OH)] (1), [MoO2(Br2SN)(CH3OH)] (2), and [MoO2(I2SN)(CH3OH)] (3). Various techniques like NMR (1H and 13C), FT-IR, Mass, TGA, elemental (CHN), and single-crystal X-ray diffraction analysis (for H2Cl2SN·H2O, 2a, [MoO2(Br2SN)(C2H5OH)], and 3a, [MoO2(I2SN)(H2O)].DMF) were utilized to characterize the synthesized compounds. The data collected from diffraction studies revealed that the geometry around Mo(VI) ions was distorted octahedral. Additionally, all complexes were successfully screened as catalysts for the selective oxidation of benzylic alcohols employing ethanol and hydrogen peroxide.

Radical-driven selective oxidation of benzyl alcohol on MnCoOx catalysts with no oxidant other than air in reactor

Mn reinforced Co3O4 catalysts (MnCoOx) were prepared by a facile solid phase mixed foaming method with an in-situ heating enhancement for the formation of spinel phase mixed oxide species, and studied in the selective oxidation of benzyl alcohol just the air in reactor as oxygen donor. It was found that the MnCoOx catalysts are composed of relatively minimal spinel MnCo2O4 mixed oxide and massive Co3O4 to form MnCo2O4-Co3O4 oxide pair. The micro-domains of MnCo2O4-Co3O4 oxide pair present two redox couples of Mn3+/Mn2+ and Co3+/Co2+ instead of the single one of Co3+/Co2+ in Co3O4, and then dramatically enhance the formation of superoxide radicals (•O2–) species from the O2 in air, which can efficiently initiate the conversion of benzyl alcohol to benzaldehyde in a Fenton-like processes. With no oxidant other than air in reactor, the interaction between MnCo2O4 and Co3O4 in MnCoOx catalysts leads to a benzyl alcohol conversion up to 98 % with a 100 % benzaldehyde selectivity at atmospheric pressure while single component Co3O4 can only present a benzyl alcohol conversion at 37 %. This embodiment of highly efficient heterogeneous selective oxidation just with air as oxidant provides a probability for developing a low-cost and super-facile radical-induced selective oxidation process for alcohols.

Selective oxidation of Tetrahydrofurfuryl alcohol to 2-Methyl tetrahydrofuran catalysed by Ag–CeOx/MCM-41

Selective oxidation of Tetrahydrofurfuryl alcohol to 2-Methyl tetrahydrofuran catalysed by Ag–CeOx/MCM-41

Electrochemical alcohol oxidation reaction on Precious‐Metal‐Free catalysts: Mechanism, activity, and selectivity

AbstractThe electrochemical alcohol oxidation reaction (AOR) is pivotal for the development of sustainable energy. The complete oxidation of alcohols has attracted extensive attention as a vital process in fuel cells. Moreover, as an alternative reaction to the oxygen evolution reaction, the selective oxidation of alcohols emerges as an effective means to lower the energy expenditure associated with electrolytic hydrogen production while yielding high‐value products. Nonprecious metal materials have been widely applied in the selective oxidation catalysis of alcohols due to their cost‐effectiveness and excellent durability. In recent years, leveraging the advantages of nonprecious metal materials in electrocatalytic AOR, researchers have delved into catalytic mechanisms and various efficient catalysts have been fabricated and evaluated. This review provides an overview of the current advancements in the electrocatalytic selective oxidation of diverse alcohols and the catalytic systems centered around nonprecious metal materials. It systematically summarizes the shared traits and distinctions in catalytic reaction characteristics across various systems, thereby laying the theoretical foundation for developing novel catalyst systems that are efficient, stable, and highly selective. This review will facilitate the utilization of nonprecious metal catalysts further toward the electrocatalytic oxidation of alcohols.

Tailoring Charge Separation in ZnIn2S4@CdS Hollow Nanocages for Simultaneous Alcohol Oxidation and CO2 Reduction under Visible Light.

Artificial photosynthesis provides a sustainable strategy for producing usable fuels and fine chemicals and attracts broad research interest. However, conventional approaches suffer from low reactivity or low selectivity. Herein, we demonstrate that photocatalytic reduction of CO2 coupled with selective oxidation of aromatic alcohol into corresponding syngas and aromatic aldehydes can be processed efficiently and fantastically over the designed S-scheme ZnIn2S4@CdS core-shell hollow nanocage under visible light. In the ZnIn2S4@CdS heterostructure, the photoexcited electrons and holes with weak redox capacities are eliminated, while the photoexcited electrons and holes with powder redox capacities are separated spatially and preserved on the desired active sites. Therefore, even if there are no cocatalysts and no vacancies, ZnIn2S4@CdS exhibits high reactivity. For instance, the CO production of ZnIn2S4@CdS is about 3.2 and 3.4 times higher than that of pure CdS and ZnIn2S4, respectively. More importantly, ZnIn2S4@CdS exhibits general applicability and high photocatalytic stability. Trapping agent experiments, 13CO2 isotopic tracing, in situ characterizations, and theoretical calculations reveal the photocatalytic mechanism. This study provides a new strategy to design efficient and selective photocatalysts for dual-function redox reactions by tailoring the active sites and regulating vector separation of photoexcited charge carriers.

Visible Light-Mediated Selective Aerobic Oxidation of Alcohols Catalyzed by Disulfide in Batch and Flow.

Selective aerobic oxidation of alcohols in batch and flow can be realized under light irradiation, utilizing disulfide as the photocatalyst, and a variety of primary and secondary alcohols were converted to the corresponding aldehydes or ketones in up to 99% yield and high selectivity. The reaction efficiency could be increased even further by combining a continuous-flow strategy. Detailed mechanistic studies have also been achieved to determine the role of oxygen and disulfides in this oxidation.

Guest-Regulated Generation of Reactive Oxygen Species from Porphyrin-Based Multicomponent Metallacages for Selective Photocatalysis.

The development of novel materials for highly efficient and selective photocatalysis is crucial for their practical applications. Herein, we employ the host-guest chemistry of porphyrin-based metallacages to regulate the generation of reactive oxygen species and further use them for the selective photocatalytic oxidation of benzyl alcohols. Upon irradiation, the sole metallacage (6) can generate singlet oxygen (1O2) effectively via excited energy transfer, while its complex with C70 (6⊃C70) opens a pathway for electron transfer to promote the formation of superoxide anion (O2⋅-), producing both 1O2 and O2⋅-. The addition of 4,4'-bipyridine (BPY) to complex 6⊃C70 forms a more stable complex (6⊃BPY) via the coordination of the Zn-porphyrin faces of 6 and BPY, which drives fullerenes out of the cavities and restores the ability of 1O2 generation. Therefore, benzyl alcohols are oxidized into benzyl aldehydes upon irradiation in the presence of 6 or 6⊃BPY, while they are oxidized into benzoic acids when 6⊃C70 is employed as the photosensitizing agent. This study demonstrates a highly efficient strategy that utilizes the host-guest chemistry of metallacages to regulate the generation of reactive oxygen species for selective photooxidation reactions, which could promote the utilization of metallacages and their related host-guest complexes for photocatalytic applications.

Guest‐Regulated Generation of Reactive Oxygen Species from Porphyrin‐Based Multicomponent Metallacages for Selective Photocatalysis

AbstractThe development of novel materials for highly efficient and selective photocatalysis is crucial for their practical applications. Herein, we employ the host‐guest chemistry of porphyrin‐based metallacages to regulate the generation of reactive oxygen species and further use them for the selective photocatalytic oxidation of benzyl alcohols. Upon irradiation, the sole metallacage (6) can generate singlet oxygen (1O2) effectively via excited energy transfer, while its complex with C70 (6⊃C70) opens a pathway for electron transfer to promote the formation of superoxide anion (O2⋅−), producing both 1O2 and O2⋅−. The addition of 4,4′‐bipyridine (BPY) to complex 6⊃C70 forms a more stable complex (6⊃BPY) via the coordination of the Zn‐porphyrin faces of 6 and BPY, which drives fullerenes out of the cavities and restores the ability of 1O2 generation. Therefore, benzyl alcohols are oxidized into benzyl aldehydes upon irradiation in the presence of 6 or 6⊃BPY, while they are oxidized into benzoic acids when 6⊃C70 is employed as the photosensitizing agent. This study demonstrates a highly efficient strategy that utilizes the host‐guest chemistry of metallacages to regulate the generation of reactive oxygen species for selective photooxidation reactions, which could promote the utilization of metallacages and their related host‐guest complexes for photocatalytic applications.