Selective Binding Properties Research Articles

Improving grapevine virus diagnostics: Comparative analysis of three dsRNA enrichment methods for high-throughput sequencing

The extraction of double stranded (ds) RNA is a common enrichment method for the study, characterization, and detection of RNA viruses. In addition to RNA viruses, viroids, and some DNA viruses, can also be detected from dsRNA enriched extracts which makes it an attractive method for detecting a wide range of viruses when coupled with HTS. Several dsRNA enrichment strategies have been developed. The oldest utilizes the selective binding properties of dsRNA to cellulose. More recent methods are based on the application of anti-dsRNA antibodies and viral proteins with a specific affinity for dsRNA. All three methods have been used together with HTS for plant virus detection and study. To our knowledge, this is the first comparative study of three alternative dsRNA enrichment methods for virus and viroid detection through HTS using virus-infected, and healthy grapevine test plants. Extracts were performed in triplicate using methods based on, the anti-dsRNA antibody mAb rJ2 (Millipore Sigma Canada Ltd, Oakville, ON, Canada), the B2 dsRNA binding protein, and ReliaPrep™ Resin (Promega Corporation, Madison, WI, USA). The results show that the workflows for all three methods are effectively comparable, apart from purification steps related to antibody and binding protein construct. Both the cellulose resin and dsRNA binding protein construct methods provide highly enriched dsRNA extracts suitable for HTS with the B2 method providing a 36× and the ReliaPrep™ Resin a 163× increase in dsRNA enrichment compared to the mAb rJ2 antibody. The overall consistency and cost effectiveness of the ReliaPrep™ cellulose resin-based method and the potentially simpler adaptation to robotics made it the method of choice for future transfer to a semi-automated workflow.

Aptamer decorated PDA@magnetic silica microparticles for bacteria purification

One significant constraint in the advancement of biosensors is the signal-to-noise ratio, which is adversely affected by the presence of interfering factors such as blood in the sample matrix. In the present investigation, a specific aptamer binding was chosen for its affinity, while exhibiting no binding affinity towards non-target bacterial cells. This selective binding property was leveraged to facilitate the production of magnetic microparticles decorated with aptamers. A novel assay was developed to effectively isolate S. pneumoniae from PBS or directly from blood samples using an aptamer with an affinity constant of 72.8 nM. The capture experiments demonstrated efficiencies up to 87% and 66% are achievable for isolating spiked S. pneumoniae in 1 mL PBS and blood samples, respectively.Graphical abstract

High-efficient Ag(I) ion binding, Ag(0) nanoparticle loading, and iodine trapping in ultrastable benzimidazole-linked polymers

Interest in functional silver has rapidly grown over the years due to significant advances in separation, sensing, catalysis, and biomedical applications. Here we developed a new strategy to load single atomic silver species in the rigid and open unit of the fully conjugated benzimidazole-linked polymers (BILPs). Due to the well-defined chelating units of N-heterocycles, the Ag+ ion species can be coordinated by N ligands and stabilized in the atomic level without aggregating into nanoscale Ag clusters and nanoparticles. The obtained Ag+-BILP-101 exhibits a selective binding property of Ag+ ions from solutions. The ultrastable structure and the property of taking up metal species, endow BILPs with the advantages of functionalizing metal species. After the reduction by NaBH4, the Ag+ ions were transferred into Ag nanoparticles. The substantial and intrinsic porosity of BILPs also gives excellent accessibility to Ag species loaded in the frameworks. The plentiful N-heterocycles and loaded Ag species show a synergistic/coadsorption effect for iodine vapor, and the charge transfer from frameworks promotes the formation of iodide ions. The iodine capture capacities of Ag+-BILP-101 and Ag0-BILP-101 reach 3.3 g/g and 3.7 g/g at 80 ℃, and still maintain 3.2 g/g and 3.5 g/g at 150 ℃, respectively. After ethanol elution, the residual iodine/Ag molar ratios in Ag+/Ag0-BILP-101 samples are still more than one (about 1.5), suggesting their strong affinity toward iodine. This work highlights the excellent selective Ag+ ion binding and Ag species supporting properties of BILPs, which can extend to other porous organic framework platforms for various applications based on silver species-skeleton interactions.

Current Trends in the Use of Semiconducting Materials for Electrochemical Aptasensing

Aptamers are synthetic single-stranded oligonucleotides that exhibit selective binding properties to specific targets, thereby providing a powerful basis for the development of selective and sensitive (bio)chemical assays. Electrochemical biosensors utilizing aptamers as biological recognition elements, namely aptasensors, are at the forefront of current research. They exploit the combination of the unique properties of aptamers with the advantages of electrochemical detection with the view to fabricate inexpensive and portable analytical platforms for rapid detection in point-of-care (POC) applications or for on-site monitoring. The immobilization of aptamers on suitable substrates is of paramount importance in order to preserve their functionality and optimize the sensors’ sensitivity. This work describes different immobilization strategies for aptamers on the surface of semiconductor-based working electrodes, including metal oxides, conductive polymers, and carbon allotropes. These are presented as platforms with tunable band gaps and various surface morphologies for the preparation of low cost, highly versatile aptasensor devices in analytical chemistry. A survey of the current literature is provided, discussing each analytical method. Future trends are outlined which envisage aptamer-based biosensing using semiconductors.

Crystallographic Deciphering of Spontaneous Self-Assembly of Achiral Calciphores to Chiral Complexes.

Thiapyricins (TPC-A/B, 1 and 2), which are new metallophore scaffolds exhibiting selective divalent cation binding property, were produced in response to metal-deprived conditions by Saccharothrix sp. TRM_47004 isolated from the Lop Nor Salt Lake. TPCs represent a thiazolyl-pyridine skeleton of a calcium-binding natural product, calciphore, owing to the selectivity to calcium ions among diverse metal ions. The thiapyricins exhibited notable co-crystalline characteristics of the apo- and holo-forms with racemic enantiomers comprising a pair of space isomers in a Δ/Λ-form. Therefore, we postulated a mechanism for the four-hierarchical self-assembly of achiral natural products into chiral complexes. Furthermore, their metal-chelating trait aided the adaptation of the host during metal starvation by increasing the production of TPCs. This study presents a structural paradigm of a new calciphore, provides insight into the mechanism of natural product assembly, and highlights the causality between the production of the metallophore and metallic habitats.

Inverse emulsion-crosslinked cyclodextrin polymer nanoparticles for selective adsorption and chemiresistive sensing of BTEX

Macrocyclic molecules, such as cyclodextrins, possess selective host-guest binding properties and can be incorporated into larger architectures for adsorption or sensing applications. An inverse emulsion approach was developed for the synthesis of crosslinked polymer nanoparticles of cyclodextrins (CD-PNP) without the employment of any additional linker or spacer. The macrocyclic cavity of cyclodextrin endows CD-PNP with the ability to selectively bind benzene, toluene, ethylbenzene, and xylenes (BTEX) molecules according to their size and shape, while the cross-linked porous network enables high adsorption capacities (e.g. 378.1 mg/g for benzene). The solution processability of nanoparticles enables feasible incorporation of CD-PNP, together with carbon nanotubes (CNT), into composite chemiresistive sensor devices. These sensors exhibit high sensitivity and excellent selectivity in response to the exposure of various BTEX vapors.

Exploration of The Selective Binding Property of The MIP-grafted Paper for Cochineal Dye

A molecularly imprinted polymer (MIP) is a synthetic polymer that provides specific cavities for its analyte. In this study, the MIP specific to carminic acid, an insect-derived pigment, has been synthesized using methacrylic acid (MAA) and 4-vinyl pyridine (4Vpy) as monomers and ethylene glycol dimethacrylate (EDGMA) as a cross-linker. The imprinted surface particles were characterized by Scanning Electron Microscope (SEM). The rough surface of the synthesized MIP represented the specific binding site for carminic acid. The paper-based MIP polymerization was performed by pre-treatment the cellulose paper with aminopropyltriethoxysilane (APTES) before polymerization with the MIP solution. The novel membrane-grafted MIP exhibits good performance for selective recognition with the target carminic acid, which can be demonstrated by the imprinted factor of 1.94 as compared to those of nonimprinted polymer. According to the Scatchard analysis, it was estimated that there are two types of binding strategy, including high and low affinity, which corresponded to the Ka of 1.24x103 mM and 0.10 x103 mM, respectively. It was thus preliminary concluded that the membrane-grafted MIP fabricated in this study has the potential to be implemented in many applications such as extraction and pre-concentration.

Noncovalent interactions of 1,4‐dithiafulvene and nitroaromatics: A combined DFT and ab initio molecular dynamics (AIMD) study

AbstractThe noncovalent interactions between a redox‐active molecule, phenyl‐substituted 1,4‐dithiafulvene (Ph‐DTF), and ten commonly encountered nitroaromatic compounds (NACs) were systematically investigated by means of density functional theory (DFT) calculations and ab initio molecular dynamics (AIMD) simulations. Our modeling studies examined their 1:1 complexes in terms of equilibrium geometries, frontier molecular orbitals (FMOs), nature of noncovalent forces, intermolecular charge transfer (ICT), and interaction energies at the ωB97XD/6‐31+G(d,p) level of theory. Vertical electronic transition properties were investigated through time‐dependent density functional theory (TD‐DFT) calculations, and energy decomposition analysis was conducted according to the symmetry‐adapted perturbation theory (SAPT). The computational results indicate that Ph‐DTF can form thermodynamically stable 1:1 complexes with trinitro‐substituted benzenes (e.g., 2,4,6‐trinitrotoluene and picric acid), but its interactions with mono‐ and dinitrobenzenes do not exhibit such stability. The selective binding properties are further corroborated by AIMD simulations. Overall, this computational work establishes a comprehensive understanding of the nature of noncovalent interactions of Ph‐DTF with various NACs, and the results can be used as theoretical guidance for the rational design of selective receptors and/or chemosensors for certain NACs that are of great concern in current industrial applications and environmental control.

Characterization of the selective binding of modified chitosan nanoparticles to Gram-negative bacteria strains

Chitosan is a nature-sourced polysaccharide widely used in numerous applications. The antibacterial potential of chitosan has attracted researchers to further develop and utilize this polymer for the formation of biocompatible antibacterial agents for both the food and healthcare industries. The tested hypothesis in this study is that modified N-alkylaminated chitosan nanoparticles (CNPs) have selective binding properties to Gram-negative bacteria strains that result in bacterial aggregation. Various bacterial strains were tested of five Gram-negative bacteria including Erwinia carotovora, Escherichia coli, Pseudomonas aeruginosa, Salmonella, and Serratia marcescens, as well as three Gram-positive bacteria strains including Bacillus licheniformis, Bacillus megaterium, and Bacillus subtilis. The fluorescence microscopy characterization showed that the presence of CNPs caused the aggregation of Escherichia coli bacteria cells, where modified CNPs with a shorter chain length of the substituent caused a higher aggregation effect. Moreover, it was found that the CNPs exhibited a selective binding behavior to Gram-negative as compared to Gram-positive bacteria strains, mainly to Escherichia coli and Salmonella. Also, the scanning electron microscopy characterization showed that CNPs exhibited selective binding to Gram-negative bacteria, which was especially understood when both Gram-negative and Gram-positive bacteria strains were within the same sample. In addition, the bacterial viability assay suggests that CNPs with a lower degree of substitution have a higher inhibitory effect on bacterial growth. CNPs with longer side chains had a less inhibitory effect on the bacterial growth of Gram-negative strains, where a concentration-dependent response pattern was only seen for the cases of Gram-negative strains, and not for the case of Gram-positive strain. To conclude, the further understanding of the selective binding of CNPs to Gram-negative bacteria strains may produce new opportunities for the discovery and characterization of effective antibacterial agents.

The Ubiquitin Interacting Motif-Like Domain of Met4 Selectively Binds K48 Polyubiquitin Chains

Protein ubiquitylation is an important posttranslational modification that governs most cellular processes. Signaling functions of ubiquitylation are very diverse and involve proteolytic as well as nonproteolytic events, such as localization, regulation of protein interactions, and control of protein activity. The intricacy of ubiquitin signaling is further complicated by several different polyubiquitin chain types that are likely recognized and interpreted by different protein readers. For example, K48-linked ubiquitin chains represent the most abundant chain topology and are the canonical degradation signals, but have been implicated in degradation-independent functions as well, likely requiring a variety of protein readers. Ubiquitin binding domains that interact with polyubiquitin chains are likely at the center of ubiquitin signal recognition and transmission, but their structure and selectivity are largely unexplored. Here we report identification and characterization of the ubiquitin interacting motif-like (UIML) domain of the yeast transcription factor Met4 as a strictly K48-polyubiquitin specific binding unit using methods such as biolayer interferometry (BLI), pull-down assays, and mass spectrometry. We further used the selective binding property to develop an affinity probe for purification of proteins modified with K48-linked polyubiquitin chains. The affinity probe has a Kd = 100 nM for K48 tetra-ubiquitin and shows no detectable interaction with either monoubiquitin or any other polyubiquitin chain configuration. Our results define a short strictly K48-linkage-dependent binding motif and present a new affinity reagent for the K48-polyubiquitin-modified proteome. Our findings benefit the ubiquitin field in analyses of the role of K48-linked polyubiquitylation and increase our understanding of chain topology selective ubiquitin chain recognition.

3-Hydroxy-7,8,9,10-tetrahydro-6H-benzo[c]chromen-6-one and 3-hydroxy-6H-benzo[c]chromen-6-one act as on-off selective fluorescent sensors for Iron (III) under in vitro and ex vivo conditions.

Regarding the abundant use of metals for different purposes, it becomes more critical from various scientific and technological perspectives to discover novel agents as selective probes for the detection of specific metals. In our previous studies, we have shown that aqueous solutions of natural urolithins (i.e., hydroxyl-substituted benzo[c]chromen-6-one derivatives) are selective Iron (III) sensors in fluorescence assays. In this study, we have extrapolated these findings to another coumarine compound (i.e., 3-Hydroxy-7,8,9,10-tetrahydro-6H-benzo[c]chromen-6-one) and compared the selective metal binding properties with Urolithin B (i.e., 3-Hydroxy-6H-benzo[c]chromen-6-one). Following the synthesis and structure identification studies, the fluorometric studies pointed out that the lactam group in the structure still persists to be the important scaffold for maintaining selective on-off sensor capacity that renders the compound a selective Iron (III) binding probe. Moreover, for the first time, fluorescence cellular imaging studies concomitant to cytotoxicity assays with the title compounds were also performed and the results displayed the cell-penetrative, safe, and fluorescent detectable characteristics of the compounds in neuroblastoma and glioblastoma cells through servings as intracellular Iron (III) on-off sensors.

Therapeutic Antibodies Targeting Potassium Ion Channels.

Monoclonal antibodies combine specificity and high affinity binding with excellent pharmacokinetic properties and are rapidly being developed for a wide range of drug targets including clinically important potassium ion channels. Nonetheless, while therapeutic antibodies come with great promise, K+ channels represent particularly difficult targets for biologics development for a variety of reasons that include their dynamic structures and relatively small extracellular loops, their high degree of sequence conservation (leading to immune tolerance), and their generally low-level expression in vivo. The process is made all the more difficult when large numbers of antibody candidates must be screened for a given target, or when lead candidates fail to cross-react with orthologous channels in animal disease models due to their highly selective binding properties. While the number of antibodies targeting potassium channels in preclinical or clinical development is still modest, significant advances in the areas of protein expression and antibody screening are converging to open the field to an avalanche of new drugs. Here, the opportunities and constraints associated with the discovery of antibodies against K+ channels are discussed, with an emphasis on novel technologies that are opening the field to exciting new possibilities for biologics development.

Synthesis of Butadiynyl-Strapped Corona[6]arenes and Their Selective Anion Binding Properties.

A number of butadiynylene-strapped O6-corona[6]arenes were synthesized straightforwardly through intramolecular oxidative homocoupling of O6-corona[6]arenes, which contained at least two N-propargyl-phthalimide segments. The mono-macrocyclic reactants were prepared from the reaction between 3,6-dichlorotetrazine and N-propargyl-3,6-dihydroxyphthalimide and another 1,4-dihydroxybenzene derivative with roughly a 3:2:1.3-1.5 ratio in a one-pot reaction manner. The synthesized butadiynylene-strapped corona[3]arene[3]tetrazines acted as highly selective electron-deficient macrocyclic hosts to form 1:1 complexes with thiocyanate in solution, and the association constant (Ka) was up to 1390 M-1. The anion-π noncovalent interactions provided the driving force for host-guest complexation.

Functionalized nanoporous gold as a new biosensor platform for ultra-low quantitative detection of human serum albumin

The development of a new generation of ultra-sensitive sensors for analytical and bio-diagnostic devices requires a strong signal in front of very small quantity of analyte, often present in complex and interfering matrix. Taking advantage of peculiar plasmonic properties of nanoporous gold (NPG), a promising sensor for selective detection of Human Serum Albumin (HSA), a proof-of-concept bioanalyte, was prepared and tested in a conventional micro-Raman spectrometer using Surface Enhanced Raman Spectroscopy (SERS). NPG was synthesized by chemical de-alloying of an amorphous precursor, Au20Cu48Ag7Pd5Si20, starting from melt spun ribbons. A fully de-alloyed ribbon with ligaments of about 60 nm was obtained after 4 h of de-alloying at 70 °C and 10 M HNO3 + 0.5 M HF. This material is self-standing, mechanically resistant, and suitable for wide range of applications. At this stage, NPG is SERS-active toward several molecules, including pyridine, bi-pyridine, and rhodamine at very low concentration. In order to obtain the selective binding properties required to detect molecules in bio-diagnostic applications, immuno-functionalization of NPG was carried out by using an anti-HSA antibody (Ab-anti-HSA) covalently grafted on gold ligaments via the 4-aminothiophenol (4ATP) Raman probe, yielding the SERS-active nanohybrid NPG-4ATP-Ab. SERS signal recorded at increasing HSA concentrations was used for the acquisition of SERS maps and a chemometric regression model allowed to calibrate the sensor. In the best experimental conditions, we were able to get quantitative analysis of HSA at ultra-low concentrations (0.1 ng/l) with SERS.The methodology proposed in this paper has to be considered a major step toward a calibrated device for ultra-sensitive detection of biomolecules by SERS detection.

Urolithin B as a Simple, Selective, Fluorescent Probe for Sensing Iron(III) in Semi-Aqueous Solution.

The development of simple, environmental friendly, and cheap reagents with metal binding properties are quite important not only for the treatment of environmental pollution but also for their application in medicine. Within this study, for the first time, we displayed a natural chromen analogue, Urolithin B, as a simple, selective, fluorescent iron (III) sensing probe. Following the synthesis and structure identification studies, the selective metal binding property of the compound was displayed employing fluorescence techniques. Accordingly, urolithin B has the capacity to coordinate selectively to iron (III) with a 3:2 stoichiometry.

Efficacy of Trabodenoson in a Mouse Keratoconjunctivitis Sicca (KCS) Model for Dry-Eye Syndrome.

To determine the efficacy of trabodenoson, an adenosine mimetic with highly selective adenosine A1 receptor binding properties, in a preclinical mouse model for dry-eye disease. Dry-eye disease was induced in adult male C57BL/6 mice using a combination of desiccating environment and transdermal administration of scopolamine. Mice were treated concurrently and twice daily with either vehicle, 6% trabodenoson, or 0.05% cyclosporine (Restasis). Efficacy (P < 0.05 versus vehicle) was determined by clinical assessment of dry-eye symptoms using corneal fluorescein staining and tear volumes and histopathologically by quantifying lacrimal gland pathology and conjunctival goblet cells. Twice-daily topical (ocular) administration of trabodenoson increased tear levels and reduced corneal fluorescein staining (P < 0.05) as compared with vehicle-treated eyes in a mouse model of dry-eye disease. Furthermore, significant infiltration of immune cells in the lacrimal gland and reduced number of mucin-producing conjunctival goblet cells were noted in both untreated and vehicle-treated eyes. Comparatively, trabodenoson treatment significantly reduced lacrimal gland infiltration and increased the number of goblet cells (P < 0.05 for both versus vehicle). These trabodenoson-related effects on lacrimal gland pathology and goblet cells were similar to or better than the effects observed with cyclosporine treatment. Topical ocular delivery of trabodenoson significantly improves the clinical and histopathological signs associated with dry-eye disease in mice. This improvement appears to be related to anti-inflammatory effects from targeting adenosine signaling and represents a novel therapeutic approach to develop for the management of dry-eye disease.

SALMFamide2 and serotonin immunoreactivity in the nervous system of some acoels (Xenacoelomorpha).

Acoel worms are simple, often microscopic animals with direct development, a multiciliated epidermis, a statocyst, and a digestive parenchyma instead of a gut epithelium. Morphological characters of acoels have been notoriously difficult to interpret due to their relative scarcity. The nervous system is one of the most accessible and widely used comparative features in acoels, which have a so‐called commissural brain without capsule and several major longitudinal neurite bundles. Here, we use the selective binding properties of a neuropeptide antibody raised in echinoderms (SALMFamide2, or S2), and a commercial antibody against serotonin (5‐HT) to provide additional characters of the acoel nervous system. We have prepared whole‐mount immunofluorescent stainings of three acoel species: Symsagittifera psammophila (Convolutidae), Aphanostoma pisae, and the model acoel Isodiametra pulchra (both Isodiametridae). The commissural brain of all three acoels is delimited anteriorly by the ventral anterior commissure, and posteriorly by the dorsal posterior commissure. The dorsal anterior commissure is situated between the ventral anterior commissure and the dorsal posterior commissure, while the statocyst lies between dorsal anterior and dorsal posterior commissure. S2 and serotonin do not co‐localise, and they follow similar patterns to each other within an animal. In particular, S2, but not 5‐HT, stains a prominent commissure posterior to the main (dorsal) posterior commissure. We have for the first time observed a closed posterior loop of the main neurite bundles in S. psammophila for both the amidergic and the serotonergic nervous system. In I. pulchra, the lateral neurite bundles also form a posterior loop in our serotonergic nervous system stainings.

2,3-Ethylene-bridged dihomooxacalix[4]arenes: synthesis, X-ray crystal structures and highly selective binding properties with anions

Three novel 2,3-ethylene-bridgedp-tert-butyldihomooxacalix[4]arenes3a–3cwere selectively synthesized by directO-alkylation ofp-tert-butyldihomooxacalix[4]arene1with excess of 1,2-dibromoethane in controlled basic systems.

Block-Sequence-Specific Glycopolypeptides with Selective Lectin Binding Properties.

Glycopolypeptides with defined block sequences were prepared by sequential addition of two different N-carboxyanhydrides (NCAs), followed by selective deprotection and functionalization of predefined positions within the polypeptide backbone. The sequential arrangement of the galactose units and the block-sequence length have been systematically varied. All the glycopolypeptides have been obtained with a similar overall composition and comparable molecular weights. Circular dichroism measurements revealed some dependence of the secondary structure on the primary composition of the glycopolypeptides at physiological pH. While statistical, diblock, and tetrablock glycopolypeptides adopted a random coil conformation, the octablock glycopolypeptide was mostly α-helical. The ability to selectively bind to lectins was investigated by turbidity measurements as well as surface plasmon resonance (SPR) studies. It was found that the extent of binding was dependent on the position of the galactose units and thus the primary glycopolypeptide structure. The octablock glycopolypeptide favored interaction with lectin RCA120 while the tetrablock glycopolypeptide demonstrated the strongest binding activity to Galectin-3. The results suggest that different lectins are very sensitive to glyco coding and that precise control of carbohydrate units in synthetic polymeric glycopeptides will remain important.

Selective binding of C-6 OH sulfated hyaluronic acid to the angiogenic isoform of VEGF165

Vascular endothelial growth factor 165 (VEGF165) is an important extracellular protein involved in pathological angiogenesis in diseases such as cancer, wet age-related macular degeneration (wet-AMD) and retinitis pigmentosa. VEGF165 exists in two different isoforms: the angiogenic VEGF165a, and the anti-angiogenic VEGF165b. In some angiogenic diseases the proportion of VEGF165b may be equal to or higher than that of VEGF165a. Therefore, developing therapeutics that inhibit VEGF165a and not VEGF165b may result in greater anti-angiogenic activity and therapeutic benefit. To this end, we report the selective binding properties of sulfated hyaluronic acid (s-HA). Selective biopolymers offer several advantages over antibodies or aptamers including cost effective and simple synthesis, and the ability to make nanoparticles or hydrogels for drug delivery applications or VEGF165a sequestration. Limiting sulfation to the C-6 hydroxyl (C-6 OH) in the N-acetyl-glucosamine repeat unit of hyaluronic acid (HA) resulted in a polymer with strong affinity for VEGF165a but not VEGF165b. Increased sulfation beyond the C-6 OH (i.e. greater than 1 sulfate group per HA repeat unit) resulted in s-HA polymers that bound both VEGF165a and VEGF165b. The C-6 OH sulfated HA (Mw 150 kDa) showed strong binding properties to VEGF165a with a fast association rate constant (Ka; 2.8 × 106 M−1 s−1), slow dissociation rate constant (Kd; 2.8 × 10−3 s−1) and strong equilibrium binding constant (KD; ∼1.0 nM)), which is comparable to the non-selective VEGF165 binding properties of the commercialized therapeutic anti-VEGF antibody (Avastin®). The C-6 OH sulfated HA also inhibited human umbilical vein endothelial cell (HUVEC) survival and proliferation and human dermal microvascular endothelial cell (HMVEC) tube formation. These results demonstrate that the semi-synthetic natural polymer, C-6 OH sulfated HA, may be a promising biomaterial for the treatment of angiogenesis-related disease.