Selective And Iterative Method For Performance Level Estimation Research Articles

Robust Multicontrast MRI Spleen Segmentation for Splenomegaly Using Multi-Atlas Segmentation.

Magnetic resonance imaging (MRI) is an essential imaging modality in noninvasive splenomegaly diagnosis. However, it is challenging to achieve spleen volume measurement from three-dimensional MRI given the diverse structural variations of human abdomens as well as the wide variety of clinical MRI acquisition schemes. Multi-atlas segmentation (MAS) approaches have been widely used and validated to handle heterogeneous anatomical scenarios. In this paper, we propose to use MAS for clinical MRI spleen segmentation for splenomegaly. First, an automated segmentation method using the selective and iterative method for performance level estimation (SIMPLE) atlas selection is used to address the concerns of inhomogeneity for clinical splenomegaly MRI. Then, to further control outliers, semiautomated craniocaudal spleen length-based SIMPLE atlas selection (L-SIMPLE) is proposed to integrate a spatial prior in a Bayesian fashion and guide iterative atlas selection. Last, a graph cuts refinement is employed to achieve the final segmentation from the probability maps from MAS. A clinical cohort of 55 MRI volumes (28 T1 weighted and 27 T2 weighted) was used to evaluate both automated and semiautomated methods. The results demonstrated that both methods achieved median Dice , and outliers were alleviated by the L-SIMPLE (≍1 min manual efforts per scan), which achieved 0.97 Pearson correlation of volume measurements with the manual segmentation. In this paper, spleen segmentation on MRI splenomegaly using MAS has been performed.

Automatic Measurement of the Total Visceral Adipose Tissue From Computed Tomography Images by Using a Multi-Atlas Segmentation Method.

The visceral adipose tissue (VAT) volume is a predictive and/or prognostic factor for many cancers. The objective of our study was to develop an automatic measurement of the whole VAT volume using a multi-atlas segmentation (MAS) method from a computed tomography. A total of 31 sets of whole-body computed tomography volume data were used. The reference VAT volume was defined on the basis of manual segmentation (VATMANUAL). We developed an algorithm, which measured automatically the VAT volumes using a MAS based on a nonrigid volume registration algorithm coupled with a selective and iterative method for performance level estimation (SIMPLE), called VATMAS_SIMPLE. The results were evaluated using intraclass correlation coefficient and dice similarity coefficients. The intraclass correlation coefficient of VATMAS_SIMPLE was excellent, at 0.976 (confidence interval, 0.943-0.989) (P < 0.001). The dice similarity coefficient of VATMAS_SIMPLE was also good, at 0.905 (SD, 0.076). This newly developed algorithm based on a MAS can measure accurately the whole abdominopelvic VAT.

A novel geometry-dosimetry label fusion method in multi-atlas segmentation for radiotherapy: a proof-of-concept study

Multi-atlas segmentation (MAS) has been widely used to automate the delineation of organs at risk (OARs) for radiotherapy. Label fusion is a crucial step in MAS to cope with the segmentation variabilities among multiple atlases. However, most existing label fusion methods do not consider the potential dosimetric impact of the segmentation result. In this proof-of-concept study, we propose a novel geometry-dosimetry label fusion method for MAS-based OAR auto-contouring, which evaluates the segmentation performance in terms of both geometric accuracy and the dosimetric impact of the segmentation accuracy on the resulting treatment plan. Differently from the original selective and iterative method for performance level estimation (SIMPLE), we evaluated and rejected the atlases based on both Dice similarity coefficient and the predicted error of the dosimetric endpoints. The dosimetric error was predicted using our previously developed geometry-dosimetry model. We tested our method in MAS-based rectum auto-contouring on 20 prostate cancer patients. The accuracy in the rectum sub-volume close to the planning tumor volume (PTV), which was found to be a dosimetric sensitive region of the rectum, was greatly improved. The mean absolute distance between the obtained contour and the physician-drawn contour in the rectum sub-volume 2 mm away from PTV was reduced from 3.96 mm to 3.36 mm on average for the 20 patients, with the maximum decrease found to be from 9.22 mm to 3.75 mm. We also compared the dosimetric endpoints predicted for the obtained contours with those predicted for the physician-drawn contours. Our method led to smaller dosimetric endpoint errors than the SIMPLE method in 15 patients, comparable errors in 2 patients, and slightly larger errors in 3 patients. These results indicated the efficacy of our method in terms of considering both geometric accuracy and dosimetric impact during label fusion. Our algorithm can be applied to different tumor sites and radiation treatments, given a specifically trained geometry-dosimetry model.

Multi-atlas Segmentation Enables Robust Multi-contrast MRI Spleen Segmentation for Splenomegaly.

Non-invasive spleen volume estimation is essential in detecting splenomegaly. Magnetic resonance imaging (MRI) has been used to facilitate splenomegaly diagnosis in vivo. However, achieving accurate spleen volume estimation from MR images is challenging given the great inter-subject variance of human abdomens and wide variety of clinical images/modalities. Multi-atlas segmentation has been shown to be a promising approach to handle heterogeneous data and difficult anatomical scenarios. In this paper, we propose to use multi-atlas segmentation frameworks for MRI spleen segmentation for splenomegaly. To the best of our knowledge, this is the first work that integrates multi-atlas segmentation for splenomegaly as seen on MRI. To address the particular concerns of spleen MRI, automated and novel semi-automated atlas selection approaches are introduced. The automated approach interactively selects a subset of atlases using selective and iterative method for performance level estimation (SIMPLE) approach. To further control the outliers, semi-automated craniocaudal length based SIMPLE atlas selection (L-SIMPLE) is proposed to introduce a spatial prior in a fashion to guide the iterative atlas selection. A dataset from a clinical trial containing 55 MRI volumes (28 T1 weighted and 27 T2 weighted) was used to evaluate different methods. Both automated and semi-automated methods achieved median DSC > 0.9. The outliers were alleviated by the L-SIMPLE (≈1 min manual efforts per scan), which achieved 0.9713 Pearson correlation compared with the manual segmentation. The results demonstrated that the multi-atlas segmentation is able to achieve accurate spleen segmentation from the multi-contrast splenomegaly MRI scans.

Whole-body bone segmentation from MRI for PET/MRI attenuation correction using shape-based averaging.

The authors evaluate the performance of shape-based averaging (SBA) technique for whole-body bone segmentation from MRI in the context of MRI-guided attenuation correction (MRAC) in hybrid PET/MRI. To enhance the performance of the SBA scheme, the authors propose to combine it with statistical atlas fusion techniques. Moreover, a fast and efficient shape comparison-based atlas selection scheme was developed and incorporated into the SBA method. Clinical studies consisting of PET/CT and MR images of 21 patients were used to assess the performance of the SBA method. In addition, the authors assessed the performance of simultaneous truth and performance level estimation (STAPLE) and the selective and iterative method for performance level estimation (SIMPLE) combined with SBA. In addition, a local shape comparison scheme (L-Shp) was proposed to improve the performance of SBA. The SIMPLE method was applied globally (G-SIMPLE) while STAPLE method was employed at both global (G-STAPLE) and local (L-STAPLE) levels. The evaluation was performed based on the accuracy of extracted whole-body bones, fragmentation, and computation time achieved by the different methods. The majority voting (MV) atlas fusion scheme was also evaluated as a conventional and commonly used method. MRI-guided attenuation maps were generated using the different segmentation methods. Thereafter, quantitative analysis of PET attenuation correction was performed using CT-based attenuation correction as reference. The SBA and MV methods resulted in considerable underestimation of bone identification (Dice ≈ 0.62) and high factious fragmentation error of contiguous structures. Applying global atlas selection or regularization (G-STAPLE and G-SIMPLE) to the SBA method enhanced bone segmentation accuracy up to a Dice = 0.66. The best results were achieved when applying the L-STAPLE method with a Dice of 0.76 and the L-Shp method with a Dice of 0.75. However, L-STAPLE required up to five-fold increased computation time compared to the L-Shp method. Moreover, both L-STAPLE and L-Shp methods resulted in less than 3% SUV mean relative error and 6% SUV mean absolute error in bony structures owing to superior bone identification accuracy. The quantitative analysis using joint histograms revealed good correlation between PET-MRAC images using the proposed L-Shp algorithm and the corresponding reference PET-CT images. The performance of SBA was enhanced through application of local atlas weighting or regularization schemes (L-STAPLE and L-Shp). Bone recognition, fragmentation of the contiguous structures, and quantitative PET uptake recovery improved dramatically using these methods while the proposed L-Shp method significantly reduced the computation time.

Improving Cerebellar Segmentation with Statistical Fusion.

The cerebellum is a somatotopically organized central component of the central nervous system well known to be involved with motor coordination and increasingly recognized roles in cognition and planning. Recent work in multi-atlas labeling has created methods that offer the potential for fully automated 3-D parcellation of the cerebellar lobules and vermis (which are organizationally equivalent to cortical gray matter areas). This work explores the trade offs of using different statistical fusion techniques and post hoc optimizations in two datasets with distinct imaging protocols. We offer a novel fusion technique by extending the ideas of the Selective and Iterative Method for Performance Level Estimation (SIMPLE) to a patch-based performance model. We demonstrate the effectiveness of our algorithm, Non-Local SIMPLE, for segmentation of a mixed population of healthy subjects and patients with severe cerebellar anatomy. Under the first imaging protocol, we show that Non-Local SIMPLE outperforms previous gold-standard segmentation techniques. In the second imaging protocol, we show that Non-Local SIMPLE outperforms previous gold standard techniques but is outperformed by a non-locally weighted vote with the deeper population of atlases available. This work advances the state of the art in open source cerebellar segmentation algorithms and offers the opportunity for routinely including cerebellar segmentation in magnetic resonance imaging studies that acquire whole brain T1-weighted volumes with approximately 1 mm isotropic resolution.

Efficient multi-atlas abdominal segmentation on clinically acquired CT with SIMPLE context learning.

Abdominal segmentation on clinically acquired computed tomography (CT) has been a challenging problem given the inter-subject variance of human abdomens and complex 3-D relationships among organs. Multi-atlas segmentation (MAS) provides a potentially robust solution by leveraging label atlases via image registration and statistical fusion. We posit that the efficiency of atlas selection requires further exploration in the context of substantial registration errors. The selective and iterative method for performance level estimation (SIMPLE) method is a MAS technique integrating atlas selection and label fusion that has proven effective for prostate radiotherapy planning. Herein, we revisit atlas selection and fusion techniques for segmenting 12 abdominal structures using clinically acquired CT. Using a re-derived SIMPLE algorithm, we show that performance on multi-organ classification can be improved by accounting for exogenous information through Bayesian priors (so called context learning). These innovations are integrated with the joint label fusion (JLF) approach to reduce the impact of correlated errors among selected atlases for each organ, and a graph cut technique is used to regularize the combined segmentation. In a study of 100 subjects, the proposed method outperformed other comparable MAS approaches, including majority vote, SIMPLE, JLF, and the Wolz locally weighted vote technique. The proposed technique provides consistent improvement over state-of-the-art approaches (median improvement of 7.0% and 16.2% in DSC over JLF and Wolz, respectively) and moves toward efficient segmentation of large-scale clinically acquired CT data for biomarker screening, surgical navigation, and data mining.

Multi-atlas and label fusion approach for patient-specific MRI based skull estimation.

MRI-based skull segmentation is a useful procedure for many imaging applications. This study describes a methodology for automatic segmentation of the complete skull from a single T1-weighted volume. The skull is estimated using a multi-atlas segmentation approach. Using a whole head computed tomography (CT) scan database, the skull in a new MRI volume is detected by nonrigid image registration of the volume to every CT, and combination of the individual segmentations by label-fusion. We have compared Majority Voting, Simultaneous Truth and Performance Level Estimation (STAPLE), Shape Based Averaging (SBA), and the Selective and Iterative Method for Performance Level Estimation (SIMPLE) algorithms. The pipeline has been evaluated quantitatively using images from the Retrospective Image Registration Evaluation database (reaching an overlap of 72.46 ± 6.99%), a clinical CT-MR dataset (maximum overlap of 78.31 ± 6.97%), and a whole head CT-MRI pair (maximum overlap 78.68%). A qualitative evaluation has also been performed on MRI acquisition of volunteers. It is possible to automatically segment the complete skull from MRI data using a multi-atlas and label fusion approach. This will allow the creation of complete MRI-based tissue models that can be used in electromagnetic dosimetry applications and attenuation correction in PET/MR.

Efficient Abdominal Segmentation on Clinically Acquired CT with SIMPLE Context Learning.

Abdominal segmentation on clinically acquired computed tomography (CT) has been a challenging problem given the inter-subject variance of human abdomens and complex 3-D relationships among organs. Multi-atlas segmentation (MAS) provides a potentially robust solution by leveraging label atlases via image registration and statistical fusion. We posit that the efficiency of atlas selection requires further exploration in the context of substantial registration errors. The selective and iterative method for performance level estimation (SIMPLE) method is a MAS technique integrating atlas selection and label fusion that has proven effective for prostate radiotherapy planning. Herein, we revisit atlas selection and fusion techniques for segmenting 12 abdominal structures using clinically acquired CT. Using a re-derived SIMPLE algorithm, we show that performance on multi-organ classification can be improved by accounting for exogenous information through Bayesian priors (so called context learning). These innovations are integrated with the joint label fusion (JLF) approach to reduce the impact of correlated errors among selected atlases for each organ, and a graph cut technique is used to regularize the combined segmentation. In a study of 100 subjects, the proposed method outperformed other comparable MAS approaches, including majority vote, SIMPLE, JLF, and the Wolz locally weighted vote technique. The proposed technique provides consistent improvement over state-of-the-art approaches (median improvement of 7.0% and 16.2% in DSC over JLF and Wolz, respectively) and moves toward efficient segmentation of large-scale clinically acquired CT data for biomarker screening, surgical navigation, and data mining.

SIMPLE is a good idea (and better with context learning).

Selective and iterative method for performance level estimation (SIMPLE) is a multi-atlas segmentation technique that integrates atlas selection and label fusion that has proven effective for radiotherapy planning. Herein, we revisit atlas selection and fusion techniques in the context of segmenting the spleen in metastatic liver cancer patients with possible splenomegaly using clinically acquired computed tomography (CT). We re-derive the SIMPLE algorithm in the context of the statistical literature, and show that the atlas selection criteria rest on newly presented principled likelihood models. We show that SIMPLE performance can be improved by accounting for exogenous information through Bayesian priors (so called context learning). These innovations are integrated with the joint label fusion approach to reduce the impact of correlated errors among selected atlases. In a study of 65 subjects, the spleen was segmented with median Dice similarity coefficient of 0.93 and a mean surface distance error of 2.2 mm.

Expert-driven label fusion in multi-atlas-based segmentation of the prostate using weighted atlases

Automated segmentation is required for radiotherapy treatment planning, and multi-atlas methods are frequently used for this purpose. The combination of multiple intermediate results from multi-atlas segmentation into a single segmentation map can be achieved by label fusion. A method that includes expert knowledge in the label fusion phase of multi-atlas-based segmentation was developed. The method was tested by application to prostate segmentation, and the accuracy was compared to standard techniques. The selective and iterative method for performance level estimation (SIMPLE) algorithm for label fusion was modified with a weight map given by an expert that indicates the importance of each region in the evaluation of segmentation results. Voxel-based weights specified by an expert when performing the label fusion step in atlas-based segmentation were introduced into the modified SIMPLE algorithm. These weights incorporate expert knowledge on accuracy requirements in different regions of a segmentation. Using this knowledge, segmentation accuracy in regions known to be important can be improved by sacrificing segmentation accuracy in less important regions. Contextual information such as the presence of vulnerable tissue is then used in the segmentation process. This method using weight maps to fine-tune the result of multi-atlas-based segmentation was tested using a set of 146 atlas images consisting of an MR image of the lower abdomen and a prostate segmentation. Each image served as a target in a set of leave-one-out experiments. These experiments were repeated for a weight map derived from the clinical practice in our hospital. The segmentation accuracy increased 6% in regions that border vulnerable tissue using expert-specified voxel-based weight maps. This was achieved at the cost of a 4% decrease in accuracy in less clinically relevant regions. The inclusion of expert knowledge in a multi-atlas-based segmentation procedure was shown to be feasible for prostate segmentation. This method allows an expert to ensure that automatic segmentation is most accurate in critical regions. This improved local accuracy can increase the practical value of automatic segmentation.

Label Fusion in Atlas-Based Segmentation Using a Selective and Iterative Method for Performance Level Estimation (SIMPLE)

In a multi-atlas based segmentation procedure, propagated atlas segmentations must be combined in a label fusion process. Some current methods deal with this problem by using atlas selection to construct an atlas set either prior to or after registration. Other methods estimate the performance of propagated segmentations and use this performance as a weight in the label fusion process. This paper proposes a selective and iterative method for performance level estimation (SIMPLE), which combines both strategies in an iterative procedure. In subsequent iterations the method refines both the estimated performance and the set of selected atlases. For a dataset of 100 MR images of prostate cancer patients, we show that the results of SIMPLE are significantly better than those of several existing methods, including the STAPLE method and variants of weighted majority voting.