Seismic Reflection Techniques Research Articles

Moho depths for Antarctica Region by the inversion of ground-based gravity data

SUMMARYIn the last years the scientific literature has been enriched with new models of the Moho depth in the Antarctica Continent derived by the seismic reflection technique and refraction profiles, receiver functions and seismic surface waves, but also by gravimetric observations over the continent. In particular, the gravity satellite missions of the last two decades have provided data in this remote region of the Earth and have allowed the investigation of the crust properties. Meanwhile, other important contributions in this direction has been given by the fourth International Polar Year (IPY, 2007–2008) which started seismographic and geodetic networks of unprecedented duration and scale, including airborne gravimetry over largely unexplored Antarctic frontiers. In this study, a new model for the Antarctica Moho depths is proposed. This new estimation is based on no satellite gravity measures, thanks to the availability of the gravity database ANTGG2015, that collects gravity data from ground-base, airborne and shipborne campaigns. In this new estimate of the Moho depths the contribution of the gravity measures has been maximized reducing any correction of the gravity measures and avoiding constraints of the solution to seismological observations and to geological evidence. With this approach a pure gravimetric solution has been determined. The model obtained is pretty in agreement with other Moho models and thanks to the use of independent data it can be exploited also for cross-validating different Moho depths solutions.

Discovery of distinct lithosphere-asthenosphere boundary and the Gutenberg discontinuity in the Atlantic Ocean.

The plate tectonic theory requires a rigid lithosphere floating over a weak asthenosphere, separated by the lithosphere-asthenosphere boundary, which has been sometimes interpreted as the Gutenberg discontinuity. Using a deep seismic reflection technique, we report the presence of two continuous reflections covering 27 Ma to 58 Ma oceanic lithosphere in the Atlantic Ocean. We find that the upper reflection deepens with age and follows the ~1250°C isotherm, whereas the deeper reflection lies at a constant depth of ~75 km. We suggest that the upper reflection represents the thermally controlled lithosphere-asthenosphere boundary, whereas the lower reflection is the Gutenberg discontinuity, a frozen-in dehydration boundary separating the dry mantle melting region above from the hydrated mantle below formed at the ridge axis. We also find that thermal mantle anomalies rejuvenate the lithosphere, uplift the lithosphere-asthenosphere boundary, and destroy the Gutenberg discontinuity.

Enhanced Diapycnal Mixing in the Deep Ocean Around the Island of Taiwan

AbstractThe deep ocean to the east and south of Taiwan Island‒including the Okinawa Trough, Ryukyu Arc, Philippine Sea, Luzon Strait, and the northeast South China Sea‒is one of the most prominent mixing hotspots of the global ocean. The high‐resolution seismic reflection technique can provide detailed views of the water's finestructure and near‐transient turbulent mixing therein. Using legacy data from two seismic cruises, we present the finestructure and quantify turbulent mixing within the thermocline and sub‐thermocline (100–1,000 m depths) to the east and south offshore Taiwan. We derive dissipation rate ε and diapycnal diffusivity Kρ by analyzing the inertial convective turbulence regime of horizontal slope spectra from the seismically auto‐tracked wave‐fields. Dissipation and diffusivities are locally enhanced close to the topography exceeding 10−6 W⋅kg−1 and 10−2 m2⋅s−1, and gradually decrease to 10−9 W⋅kg−1 and 10−4‒10−5 m2⋅s−1 beyond tens of kilometers. The mean diffusivity distribution pattern suggests that a large fraction of the energy dissipates close to the topography and a significant fraction is radiated into the open ocean. Both the tides and west boundary current drive the significantly enhanced mixing close to the topography of ridges, isolated islands and continental slopes. Kuroshio and eddy activities are responsible for the local anomalously enhanced mixing patches far away from the topography. Comparisons among seismic results, numerical simulations and eddy analyses suggest that the energy cascades downward from large‐scale motions to small‐scale turbulence via multiple mechanisms of tide‐topography interaction, flow‐topography interaction, and frontal instability around the island of Taiwan.

AUTOMATIC METHOD BASED ON PSO-OPTIMIZED VISION-TRANSFORMER FOR GAS DETECTION IN 2D SEISMIC IMAGES

One of the geophysical techniques most frequently utilized in the oil and gas (O\&G) sector for hydrocarbon prospecting is seismic reflection. The seismic reflection technique is essential for an estimate the location and volume of gas accumulations in various onshore fields. However, this technique generates a large amount of data, and its data acquisitions are noisy. Thus it takes a while to analyze and interpret seismic data. Computational techniques based on machine learning have been proposed considering Direct Hydrocarbon Indicators (DHIs) to assist geoscientists in such activities. In this paper, we describe a method to detect gas accumulations based on the Particle Swarm Optimization (PSO) algorithm and the Vision Transformer neural network (ViT). In the best scenario, the proposed method achieved a sensitivity of 88.60%, a specificity of 99.56% and an accuracy of 99.37%. We present some tests performed on Parnaíba Basin and Netherlands F3-Block fields. Thus, it demonstrates that the proposed method is promising for assisting specialists in gas exploration tasks. DOI: 10.36558/rsc.v12i3.7902

Gaussian Beam Summation Migration of Deep Reflection Seismic Data: Numerical Examples

The deep reflection seismic technique is essential to detect the basement of petroliferous basins and the fine structure of lithosphere. The traditional stacking or time migration is usually adopted for imaging deep reflection seismic data, but the accuracy is too limited to acquire precise imaging profiles. Development of an effective prestack depth migration method for deep reflection seismic data is the urgent requirement in the field of lithosphere structure detection. The Gaussian beam summation (GBS) migration requires no local slant stacking or phase approximation. It has higher imaging precision and better flexibility and applicability to the acquisition system, which can be well applied to imaging long-array and large-trace-interval deep reflection seismic data. In this letter, the GBS migration is extended into depth-domain imaging of deep reflection seismic data. Firstly, the basic principles of GBS migration are reviewed. Then, the validity of the method is verified by a migration test on a simple crustal-scale model. Finally, according to the crust-mantle structure of typical areas, a crustal model of western Sichuan and eastern Tibet and a classical collision model are established for migration experiments, and accurate deep-domain images are obtained. We mainly conducted numerical tests for the GBS migration of deep reflection seismic data in this letter. It was verified through imaging studies by the typical crust-mantle structure model that the proposed method was a prestack depth migration method suitable for the precise imaging of deep reflection seismic data, which provided a numerical basis for its subsequent imaging application in field data.

Application of high-power ground-penetrating radar antennas with different frequencies to quickly locate the upper breakpoint of active buried faults in an urban area in the Datong basin (northern China)

Due to the difficulty in detecting the upper breakpoint of active buried faults, high-resolution detection of active buried faults in urban areas is very important for urban planning and disaster risk mitigation. The seismic reflection technique is the most common technique used to image faults at depth, but it is difficult to precisely locate the upper breakpoint of active buried faults. Ground-penetrating radar (GPR) provides high-resolution imaging in ultrashallow exploration, but the penetration depth of traditional GPR is shallow. In this work, we conducted six GPR surveys with multifrequency (25 MHz, 50 MHz and 100 MHz) and high-power GPR antennas across the possible range of the Shuiyu fault based on seismic reflection results. We obtained the trace of the Shuiyu fault within 45 m of the surface in Datong city, and the fault was found to dip approximately 70–80° to the SE. According to the GPR results, we selected a location for trenching and excavated one trench across the Shuiyu fault. The trench results verified the accuracy of the fault imaging in the GPR profiles and helped to interpret the stratigraphic information in the GPR profiles. In the accurate detection of active buried faults in other urban areas, the seismic reflection method can be used to determine the main strike of faults at depth, and then GPR can be used to detect the near-surface distribution of the faults in detail and guide trench location selection. The application of high-power GPR antennas with different frequencies in the fast detection of the upper breakpoint of active buried faults in urban areas is of great significance to earthquake hazard analysis and urban planning in Datong city.

Sizing the carbon sink associated with Posidonia oceanica seagrass meadows using very high-resolution seismic reflection imaging

Among blue carbon ecosystems, seagrass meadows have been highlighted for their contribution to the ocean carbon cycle and climate change mitigation derived from their capacity to store large amounts of carbon over long periods of time in their sediments. Most of the available estimates of carbon stocks beneath seagrass meadows are based on the analysis of short sediment cores in very limited numbers. In this study, high-resolution seismic reflection techniques were applied to obtain an accurate estimate of the potential size of the organic deposit underlying the meadows of the Mediterranean seagrass Posidonia oceanica (known as ‘matte’). Seismic profiles were collected over 1380 km of the eastern continental shelf of Corsica (France, Mediterranean Sea) to perform a large-scale inventory of the carbon stock stored in sediments. The seismic data were ground-truthed by sampling sediment cores and using calibrated seismo-acoustic surveys. The data interpolation map highlighted a strong spatial heterogeneity of the matte thickness. The height of the matte at the site was estimated at 251.9 cm, being maximum in shallow waters (10–20 m depth), near river mouths and lagoon outlets, where the thickness reached up to 867 cm. Radiocarbon dates revealed the presence of seagrass meadows since the mid-Holocene (7000–9000 cal yr BP). Through the top meter of soil, the matte age was estimated at 1656 ± 528 cal yr BP. The accretion rate showed a high variability resulting from the interplay of multiple factors. Based on the surface area occupied by the meadows, the average matte thickness underneath them and the carbon content, the matte volume and total Corg stock were estimated at 403.5 ± 49.4 million m3 and 15.6 ± 2.2 million t Corg, respectively. These results confirm the need for the application of large-scale methods to estimate the size of the carbon sink associated with seagrass meadows worldwide.

Diapycnal Mixing in the Subthermocline of the Mariana Ridge from High-Resolution Seismic Images

AbstractThe Mariana Ridge is one of the prominent mixing hotspots of the open ocean. The high-resolution underway marine seismic reflection technique provides an improved understanding of the spatiotemporal continuous map of ocean turbulent mixing. Using this novel technique, this study quantifies the diapycnal diffusivity of the subthermocline (300–1200-m depth) turbulence around the Mariana Ridge. The autotracked wave fields on seismic images allow us to derive the dissipation rate ε and diapycnal diffusivity Kρ based on the Batchelor model, which relates the horizontal slope spectra with +1/3 slope to the inertial convective turbulence regime. Diffusivity is locally intensified around the seamounts exceeding 10−3 m2 s−1 and gradually decreases to 10−5–10−4 m2 s−1 in ~60-km range, a distance that may be associated with the internal tide beam emanating paths. The overall pattern suggests a large portion of the energy dissipates locally and a significant portion dissipates in the far field. Empirical diffusivity models Kρ(x) and Kρ(z), varying with the distance from seamounts and the height above seafloor, respectively, are constructed for potential use in ocean model parameterization. Geographic distributions of both the vertically averaged dissipation rate and diffusivity show tight relationships with the topography. Additionally, a strong agreement of the dissipation results between seismic observation and numerical simulation is found for the first time. Such an agreement confirms the suitability of the seismic method in turbulence quantification and suggests the energy cascade from large-scale tides to small-scale turbulence via possible mechanisms of local direct tidal dissipation, near-local wave–wave interactions, and far-field radiating and breaking.

SHALLOW REFLECTION METHOD FOR PAVEMENT THICKNESS MEASUREMENT

The seismic reflection technique utilizes the concept of the reflected wave when the media changes its stiffness. Previous studies utilized this technique for deep subsurface profiling in the oil field exploration. The objective of this study is to assess the seismic reflection technique for measuring the shallow profile of the pavement layer and thus able to identify the layer of asphalt thickness. Via applying the non-destructive seismic reflection technique, an early sign of abnormal pavement can be detected, and thus only minimum points for destructive tests can be suggested. The analysis of reflection waves in the time domain can calculate the thickness of the asphalt pavement layer directly on site. An attempt is made to model concrete slabs with different thicknesses. The result shows the sensors arrangement twice of the thickness able to give a lower error of 0.4 % and 15% of the thickness and p-wave velocity, respectively.

The application of ambient noise and reflection seismic exploration in an urban active fault survey

As the detection of urban active faults becomes increasingly important, high-resolution detection of urban blind active faults is very important for urban planning, land use, and disaster risk reduction. However, it is difficult to determine the corresponding surface positions in the city environment for noise and building restrictions. The active source reflection seismic technique is considered the best technique to image faults with a high resolution and deep penetration. However, urban geophysical exploration must often consider the complex urban environment, which includes moving vehicles, dense power grids, and irregular buildings. These features make active source reflection seismic exploration difficult for wide application due to its drawbacks of high cost and the necessary use of explosives. In contrast, ambient noise seismic surveys have the advantages of continuous ambient noise sources, low cost, and fast deployment. These advantages are good for urban exploration. Although ambient noise seismic surveys have a lower resolution than active seismic surveys, their ultrahigh-density layout can improve the resolution. We have conducted two active source seismic lines and two ambient noise seismic lines near the Huangzhuang-Gaoliying fault (HGF) in a northern suburb of Beijing. The autocorrelation and crosscorrelation results are consistent with the active source reflection seismic results. They revealed the location of the HGF, which is composed of a set of steep dip faults. The study of the combination of the two techniques demonstrates that ambient noise seismic surveys are effective for urban active fault detection, especially for larger scale area surveys, and active source reflection seismic surveys can be used for detailed surveys. The combination of the two techniques has a higher efficiency and lower costs and can be widely used in blind urban active fault surveys.

Imaging the active faults with ambient noise passive seismics and its application to characterize the Huangzhuang-Gaoliying fault in Beijing Area, northern China

Most serious geotechnical problems related to rock engineering are generated by the existence of faults. Detection of fault (especially active faults) is the first step to conduct any further in-depth studies in faulted rock mass or rock blocks. In this paper, we investigated the plausibility to image fault zones by passive seismic surveys using recorded ambient noise. The test site is in the north suburb of Beijing, northern China along the south bank of the northwest-southeast running Wenyuhe River, where the NNE-striking Huangzhuang-Gaoliying fault (HGF, active in the Holocene) is crossing. In general, the results are in good agreement with previous studies using active source seismics conducted in this area along the HGF and existing borehole drillings in the vicinity. Undoubtedly, Active source seismic reflection technique is the best technique to image fault in depth with high resolution. The drawback is its high cost and the necessity of using explosives, a practice usually prohibited in urban settings. In contrast, passive seismic surveys take the advantage of the ever-existing ambient noise source, and provide a low-cost technique, and fast deployment that can locate the fault effectively. Though the imaging resolution is lower compared to those obtained by active source seismic surveys, our passive seismic experiment at the Wenyuhe River site demonstrated that this approach is effective, especially for those faults with significant normal faulting component and the stratigraphy is significantly different on the two sides crossing the fault line.

Assessment of Geological Structure in Nafoora Oil Field, Sirt Basin, Libya

The Nafoora oilfield is situated on a major tectonic uplift in the Eastern Sirte Basin, the Amal-Nafoora High. Four oilfields have been discovered on this uplift – Amal, Rakb, Augila, and Naffora. The Nafoora oilfield was surveyed by AGOCO company as a 2D seismic Survey in directional groups. this study used 35 seismic lines in different directions with 6 wells. The methodology used in this study aimed at the integration of geophysical and geological aspects. The seismic reflection technique is used to provide the basic structural control of the subsurface geology integrated with available exploration wells to control the interpretation. The resulted structure gives us an expecting to the new future drilling wells where it should be between the two WNW-ESE major strike-slip faults in the south, and on the right side (up throw) of the N-S minor faults which found in the north of the Nafoora oil field.

Effective utilization of seismic reflection technique with moderate cost in uranium exploration

ABSTRACTIn participation with numerous industrial partners, the Seismic Laboratory of the University of Saskatchewan has conducted a variety of active seismic reflection experiments; both on the west and east sides of the Athabasca Basin. Results of the investigations at Shea Creek, McArthur River and Keefe Lake illustrate that the seismic investigations deliver effective, highly relevant primary structural images of the subsurface, with resolution that no other geophysical technique can match. Correlation of similar seismic signatures, on several distant but inter‐related seismic sections, allowed spatial extension of promising exploration target zones previously unrecognized. Within the three‐dimensional seismic volume, comparable reflectivity patterns defined the complex areal distribution of mineralization‐related fault systems. Beyond these novel contributions, extended analysis of seismic signal attributes (amplitude and frequency), optical televiewer, and full‐wave sonic data offer detailed lithological characterization, including alteration zones, clay content, as well as porosity and fracture density information. Although these structural and geologically relevant anomalies are primary indicators of mineralization, presenting novel exploration advantages, the seismic method is still not a standard component of the Athabasca Basin exploration approach, due to the negative perception that ‘it is very expensive’. Comparing the costs of all geophysical techniques to the cost of a single logged drill hole illustrates that the results of a properly designed seismic data acquisition program not only leads to more effective planning of a drilling program, but also would lead to a much quicker recognition of the major mineralized zone(s), and a reduction in the number of required exploration boreholes. This integrated approach to exploration would then translate into a significant reduction of the total exploration expenditures. Unquestionably, the drilling of boreholes provides the most explicit, reliable information to a certain depth, but only within a very small area. Directly connecting the borehole information to seismic results extends the local reliable data; permitting reduction of the number of boreholes to create accurate two‐dimensional or three‐dimensional subsurface images and reduction of the expenditures of the total exploration program.

Seismic monitoring of hydrodynamic impact on coal seam at interval hydraulic fracturing

The article proves the importance of using interval hydraulic fracturing of coal seam for gas emission stimulation. The authors suggest using equipment for taking measures to intensify gas emission during implementation of hydraulic fracturing. They assess rock condition before and after hydrodynamic impact on coal seam by means of seismic reflection technique.

3D mapping and gravity modelling of Capel and Faust basins

The Capel and Faust basins lie at water depths of 1500- 3000 m, 800 km east of Brisbane. Geoscience Australia began a petroleum prospectivity study of these remote frontier basins with acquisition of reflection and refraction seismic, gravity, magnetic and multi-beam bathymetry data during 2006/07. The approach mapped a complex distribution of sub-basins via traditional 2D reflection seismic interpretation techniques and 3D mapping and gravity modelling. Gravity models were used to inform the seismic interpretation of basement. Gravity models had three sediment layers with average densities inferred from refraction modelling of 1.85, 2.13, 2.31 t/m3 overlying a pre-rift basement of density 2.54 t/m3, itself consisting in part of intruded older basin material. Gravity modelling of the simple density model arising from the initial interpretation of reflection seismic data indicated a first order agreement between observed and calculated data. Second order misfits were accounted for by adjustments to the sediment density values, localised adjustments to basement depths, and heterogeneity in the basement densities. The study concluded that sediment of average velocity 3500 m/s exceeds 6000 m thickness in the northwest of the area, which is sufficient for potential petroleum generation.

Shear wave reflection seismic yields subsurface dissolution and subrosion patterns: application to the Ghor Al-Haditha sinkhole site, Dead Sea, Jordan

Abstract. Near-surface geophysical imaging of alluvial fan settings is a challenging task but crucial for understating geological processes in such settings. The alluvial fan of Ghor Al-Haditha at the southeast shore of the Dead Sea is strongly affected by localized subsidence and destructive sinkhole collapses, with a significantly increasing sinkhole formation rate since ca. 1983. A similar increase is observed also on the western shore of the Dead Sea, in correlation with an ongoing decline in the Dead Sea level. Since different structural models of the upper 50 m of the alluvial fan and varying hypothetical sinkhole processes have been suggested for the Ghor Al-Haditha area in the past, this study aimed to clarify the subsurface characteristics responsible for sinkhole development.For this purpose, high-frequency shear wave reflection vibratory seismic surveys were carried out in the Ghor Al-Haditha area along several crossing and parallel profiles with a total length of 1.8 and 2.1 km in 2013 and 2014, respectively. The sedimentary architecture of the alluvial fan at Ghor Al-Haditha is resolved down to a depth of nearly 200 m at a high resolution and is calibrated with the stratigraphic profiles of two boreholes located inside the survey area.The most surprising result of the survey is the absence of evidence of a thick (> 2–10 m) compacted salt layer formerly suggested to lie at ca. 35–40 m depth. Instead, seismic reflection amplitudes and velocities image with good continuity a complex interlocking of alluvial fan deposits and lacustrine sediments of the Dead Sea between 0 and 200 m depth. Furthermore, the underground section of areas affected by sinkholes is characterized by highly scattering wave fields and reduced seismic interval velocities. We propose that the Dead Sea mud layers, which comprise distributed inclusions or lenses of evaporitic chloride, sulfate, and carbonate minerals as well as clay silicates, become increasingly exposed to unsaturated water as the sea level declines and are consequently destabilized and mobilized by both dissolution and physical erosion in the subsurface. This new interpretation of the underlying cause of sinkhole development is supported by surface observations in nearby channel systems. Overall, this study shows that shear wave seismic reflection technique is a promising method for enhanced near-surface imaging in such challenging alluvial fan settings.

SH-Mode Seismic-Reflection Imaging of Earthfill Dams

Abstract Assessing subsurface characteristics and imaging geologic features (e.g., faults, cavities, low-velocity layers, etc.) are typical problems in near-surface geophysics. These questions often have adverse geotechnical engineering implications, and can be especially acute when associated with high-hazard structures such as large earthen flood-control dams. Dam-related issues are becoming more frequent in the United States, because a large part of this major infrastructure was designed and constructed in the early- to mid-twentieth century; these dams are thus passing into the latter stages of their design life, where minute flaws that were overlooked or thought to be insignificant in design/construction are now proving problematic. The high-hydraulic heads associated with these structures can quicken degradation of weak areas and compromise long-term integrity. Addressing dam-related problems solely with traditional invasive drilling techniques is often inadequate (i.e., lack of lateral resolution) and/or economically exorbitant at this scale. However, strategic geotechnical drilling integrated with the broad utility of near-surface geophysics, particularly the horizontally polarized shear-wave (SH-mode) seismic-reflection technique for imaging the internal structural detail and geological foundation conditions of earthfill embankment dams can cost-effectively improve the overall subsurface definition needed for remedial engineering. Demonstrative evidence for this supposition is provided in the form of SH-wave seismic-reflection imaging of in situ and engineered as-built components of flood-control embankment dams at two example sites in the central United States.

High-resolution seismic imaging of debris-flow fans, alluvial valley fills and hosting bedrock geometry in Vinschgau/Val Venosta, Eastern Italian Alps

High-resolution active-source seismic surveys target the stratigraphic and structural configuration of the mid-Venosta Valley, which hosts two mega fans located at the confluence between the Adige River and its tributaries: the Gadria-Strimm fan and the Lasa fan. We aimed at imaging with high detail: 1) the postglacial sediment accumulation within the fans, 2) the characteristics of Adige river deposits, and 3) the stratigraphic/structural relationships among fans, alluvial deposits and top of the bedrock (i.e. Ötztal- Ortles-Campo Nappe units). Alluvial and debris-flow fan environments often pose significant challenges to high-resolution seismic exploration, due to the high heterogeneity and the rugged topography of the near surface. We processed our data by integrating first-arrivals refraction tomography with Common Midpoint, and Common Reflection Surface seismic reflection techniques. All methods produced complementary results which allowed us reaching a well-constrained imaging of the internal architecture of the Quaternary sedimentary cover, as well as of the geometry of the hosting bedrock surface. Our result show that the sedimentary record investigated by our profiles is nested in a strongly asymmetrical valley geometry, suggesting that the tectonic forcing associated with the contact between Ötztal- Ortles-Campo Nappe units has interacted closely with fluvial and/or glacial valley incision over the past millennia. We provide also a quantitative estimation of the overall thickness of sediment accumulation in the valley and allow to evaluate the complex postglacial sediment dynamics between the Adige River and the Gadria and Lasa fans, with the Gadria system playing a dominant role in terms of sediment supply.

Shallow water acoustic techniques to investigate transitional environments: A case study over Boka Kotorska Bay

The eastern border of the Adriatic Sea shows several examples of transitional areas marked by fragmented coastlines, islands and coastal bays. Bays and estuaries interact with the main basin influencing it and being influenced by it in terms of circulation patterns and freshwater supply. Coastal and transitional areas represent highly dynamic, rapidly changing environments subjected to multiple interactions with the marine-land-fluvial systems related processes. Processes such as coastal erosion, seawater intrusion, pollution and sediment transport and deposition affect these areas. One of the most important transitional areas along the entire Adriatic coast, from both an environmental and a socio-economic viewpoint, is the bay of Boka Kotorska, where the sea enters inland for over 20 km. The Bay is located along the Montenegro margin and is part of a ria coastal system surrounded by high mountains part of the Dinaric range. Boka Kotorska Bay includes three major basins, connected by two narrow straits with a maximum depth of 67 m. Despite its historical and geostrategic role the morphology and geology of the Bay is poorly known. Coastal areas are among the most urbanized and populated regions; for these reasons the application of geophysical minimally invasive methods are required in order to collect geological and morphological data. High resolution seismic reflection techniques such as CHIRP systems, adopting a non-impulsive source wavelet, are ideal to carry out seismic surveys in transitional environments. Here, we present a detailed description of this system in order to furnish the mathematical basis for forward modelling. Moreover, we outline a procedure to estimate the earth reflectivity by inversion of the recorded signal envelope (reflection strength), i.e., the standard way to store CHIRP data. Reflection strength data alone, characterizing the signal power as a function of time, do not retain all the characteristics of the recorded signal they represent and thus, cannot be further processed and hardly be compared with results from forward modeling. New high resolution multibeam and seismic reflection data collected in the Boka Kotorska Bay reveal unknown details of present-day morphologies and sedimentary infilling geometries. Several processes are involved in shaping the bay and its seafloor. Our results show that the observed morphologies are due to the interaction at different timescales of climate, water circulation, sealevel changes, erosion, sedimentation and tectonics constrained by the geological and structural setting of the area.

Shallow Reflection Method for Water-Filled Void Detection and Characterization

Shallow investigation is crucial in enhancing the characteristics of subsurface void commonly encountered in civil engineering, and one such technique commonly used is seismic-reflection technique. An assessment of the effectiveness of such an approach is critical to determine whether the quality of the works meets the prescribed requirements. Conventional quality testing suffers limitations including: limited coverage (both area and depth) and problems with resolution quality. Traditionally quality assurance measurements use laboratory and in-situ invasive and destructive tests. However geophysical approaches, which are typically non-invasive and non-destructive, offer a method by which improvement of detection can be measured in a cost-effective way. Of this seismic reflection have proved useful to assess void characteristic, this paper evaluates the application of shallow seismic-reflection method in characterizing the water-filled void properties at 0.34 m depth, specifically for detection and characterization of void measurement using 2-dimensional tomography.