Seismic Profiles Research Articles

Variable gauge length: Processing theory and applications to distributed acoustic sensing

AbstractMost distributed acoustic sensing systems will only process acoustic data with a fixed gauge length for the entire well depth. However, it has been shown that the gauge length is a critical parameter to improve the signal‐to‐noise ratio when used as a function of certain geophysical parameters, such as the apparent velocity. It can also be responsible for significant distortions if tuned incorrectly. In this paper, we first aim to reintroduce the concept of gauge length and derive a robust method to optimize its value based on the geophysical parameters whilst ensuring no distortion to the original signal. We then present a novel method of processing the distributed acoustic sensing data using the concept of a variable gauge length. We finish by showing applications of these techniques on synthetic vertical seismic profiling data and some of the results obtained on actual field datasets.

Well log petrophysics and interpretation of 3D seismic profiles of reservoirs in the Southern Field, Rio Del Rey Basin, Cameroon

Well log petrophysics and interpretation of 3D seismic profiles of reservoirs in the Southern Field, Rio Del Rey Basin, Cameroon

Geology aspects and formation of the erosional structure of Upper Miocene deposits of the Western Cicaucasus

The results of regional studies of the Early Miocene deposits of the Western Ciscaucasia, carried out on the basis of seismic stratigraphic analysis, are presented. The spatial pattern of sediment accumulation is analyzed and the paleogeographic conditions during the regressive stages of the Late Miocene in the Western Ciscaucasia are clarified. Erosion incisions of several levels were identified, which developed during the fall of the erosion base level during major regressions in the studied time interval. By spatial correlation of paleochannels based on a selected series of intersecting seismic profiles, the buried river valleys of the Paleo-Don and Paleo-Donts were reconstructed and constructed at the Sarmatian‒Meotis boundaries and within the Late Meotis‒Late Pontian interval.

Evaluation and modeling of velocity dispersion and frequency-dependent attenuation in gas hydrate-bearing sediments

Wave velocity and attenuation of gas hydrate-bearing samples are often extrapolated from ultrasonic to lower seismic/sonic frequencies, but the impact of measurement frequency on these properties is rarely studied. This study evaluates velocity dispersion and frequency-dependent attenuation in gas hydrate-bearing sediments (GHBS) by comparing vertical seismic profile (VSP) and sonic logging data from the Nankai Trough and Mallik field. We also employ rock physics modeling to simulate the velocity dispersion and frequency-dependent attenuation at both sites. The results show strong velocity dispersion and frequency-dependent attenuation in the Nankai Trough, attributed to thin, low-saturation hydrate intervals. In contrast, the Mallik field exhibits weak dispersion and frequency dependence, likely due to thick, highly saturated hydrate layers. A compilation of global hydrate reservoir attenuations indicates frequency dependence, with a peak in the sonic logging range, likely due to pore-scale hydrate effects. These findings emphasize the necessity of considering the effect of measurement frequency when performing time-to-depth conversion for seismic data based on the sonic velocity at higher frequencies, particularly for thin and lowly saturated hydrate layers, thereby improving the accuracy of hydrate reservoir characterization.

Clustered slumping in the northern South China Sea: Implications for chronology and geohazards

Seismic facies analysis is the most widely used method to identify event deposits from subaqueous environments. However, the internal structures of a chaotic or transparent seismic unit that represent event deposits are usually poorly imaged. This is primarily due to the limited resolution (usually <10 m) of commonly available multi-channel seismic reflection data. As a consequence, potential (sub)meter-thick, interbedded background sediments that may divide the chaotic layer cannot be discerned on such a seismic profile. The result of this, is that a complex of multiple moderate-thickness event layers can be misinterpreted as a single, thick event layer and this can greatly impact age-depth model reconstruction and geohazard assessment. One approach to resolve the problem is to correlate seismic data with high-resolution sediment core analysis. To address the problem in the South China Sea, we combine multiple methods to identify event deposits in the IODP holes U1499A and U1432C. Our dataset reveals that: (1) the previously interpreted ~50 m-thick slumping unit in the region is a complex of multiple moderately sized units; (2) the slumping events are clustered between 0.6 and 0.4 Ma. Using our new understanding of event emplacement, we define event-free age models for mass wasting on the margin of the South China Sea, improving our understanding of local geohazards. Our methods here represent a sedimentological approach which could be used in other subaqueous environments to reconstruct event-free age models and geohazard histories.

Using contrasts in horizontal P-wave reflectivity to map the base of the continental lithosphere: Results for the central and eastern U.S.

Vertical-incidence seismic reflection profiles generated from global phases for 16 earthquakes recorded by stations of the Transportable Array (TA) show distinctive patterns of P-wave reflectivity in the uppermost mantle beneath the central and eastern United States. The overall distribution of reflections identified objectively using the sign test statistic applied to bootstrapped stacks is consistent with a westward increase in depth of the lithosphere-asthenosphere boundary (LAB) from roughly 110 to 250 km that is marked within the lower lithosphere by piecewise continuous segments of elevated horizontal P-wave reflectivity. For some profiles, the onsets of zones of increased reflectivity closely match depths corresponding to the maximum negative S-wave velocity gradients found by surface-wave tomography, suggesting that P-wave reflectivity can be used to help characterize properties of the lower lithosphere. We suggest that the vertical change in horizontal reflectivity straddles the lithosphere-asthenosphere transition, encompassing a broad zone of layering caused by increased strain in the lower lithosphere as well as drag-induced flow in the asthenosphere. Some of the lines also show waveforms that fall within the depth range of arrivals identified as midlithospheric discontinuities (MLDs) in overlapping Sp receiver-function profiles. The reflection waveforms observed in the TA lines are mostly multicyclic with a mix of polarities indicating a layered transition, consistent with previous observations and model studies that show the breakup of single Sp waveforms into a series of less prominent, shorter-period P-wave reflections as the dominant frequency of incident energy is increased.

Field geology under the sea with a remotely operated vehicle: Mona Rift, Puerto Rico

We implemented concepts of field geology at great ocean depths by constructing virtual outcrops from a string of overlapping video frames collected by remotely operated vehicles (ROVs). This lower-cost alternative to drilling boreholes allows stratigraphic extension into the offshore and regional interpretation of marine seismic profiles. The imagery was collected along a dive transect on the western wall of Mona Rift, a deep and narrow rift northwest of Puerto Rico, between water depths of 1560 m and 3927 m. The northern coast of Puerto Rico and its large offshore area are underlain by a mid-Eocene and younger forearc basin topped by a thick carbonate platform. There are no drill holes offshore, and tying seismic lines across the shoreline there is problematic. We describe our virtual outcrop and constrain its age and stratigraphy using seven rock samples collected by ROV and compare the outcrop’s stratigraphy to deep boreholes and outcrops on land. Our formation descriptions and ages agree, for the most part, with those on land, but we identified a 100-m-thick section that is represented on land by an unconformity. Our stratigraphic interpretation indicates lateral variations in formation thicknesses and establishes a cross-section for additional sampling of the Eocene–Pliocene geology. It also suggests that Mona Rift has formed since the mid-Pliocene. The presence or absence of ferromanganese (Fe-Mn) crust on rocks along the transect may be correlated with the smoothness of the rock surface.

Continuous surface-to-distributed acoustic sensor snapshots explain reactivation of individual natural fractures during an unconventional reservoir stimulation

Fiber-optic sensing technologies allow petroleum engineering teams to detect hydraulic fracture interaction with boreholes during unconventional reservoir stimulation. In combination with high-repeatability seismic sources, the same distributed acoustic sensors (DASs) enable vertical seismic profiling (VSP) of the fracture evolution away from the boreholes. We discovered clear signatures of seismic scattering on activated fractures during nine days of continuous seismic monitoring of the fracturing stages at the Austin Chalk/Eagle Ford Field Laboratory. The present study applies a novel approach for quantitative analysis of the scattering events in terms of the evolution of the geometry and elastic stiffness of individual fractures. Our characterization strategy sequentially refines the fracture models: from a stack of 1D soft layers to 3D rectangular inclusions. First, we estimate the number of fracture locations and reflectivity using a modified sparse-spike deconvolution of the stacked VSP traces. The fracture set consists of five fractures spaced by 15–30 m with a reflectivity of approximately 1%. Then, we develop a scattering integral method to refine these estimates along with an inversion of the fracture top and bottom for each monitoring vintage. We find that, initially, some of the fractures are located above the monitoring fiber with the height of approximately 100 m. Then we integrate the seismic interpretation with the low-frequency DAS and pressure and microseismic monitoring to reconstruct the activation process of the fractures. Most likely, some of the natural fractures slowly grew downward to the monitoring fiber as a result of fluid injections in the stimulated well. This led to bright strain anomalies but did not trigger seismicity. The top of the fractures remained almost constant and were limited by a lithologic boundary/stress barrier. To our knowledge, this is the first time VSP data enabled tracking of the fracture evolution with such high spatial and temporal resolution, which was previously only available for crosswell surveys and at a much smaller scale.

Along-strike variation in volcanic addition controlling post-breakup sedimentary infill: Pelotas margin, austral South Atlantic

Abstract. We investigate, using observations from seismic reflection data, the lateral variability in breakup extrusive magmatic addition along the strike of the Pelotas segment of the austral South Atlantic rifted margin and its control on post-rift accommodation space and sediment deposition. Our analysis of regional seismic reflection profiles shows that magmatic addition on the Pelotas margin varies substantially along strike from extremely magma-rich to magma-normal within a distance of ∼300 km. Using 2D flexural back-stripping, we determine the post-rift accommodation space above top volcanics. In the north, where volcanic seaward-dipping reflectors (SDRs) are thickest, the Torres High shows SDRs up to ∼20 km thick, and post-breakup water-loaded accommodation space is much less than in the south, where magmatic addition is normal and SDRs are thinner. We show that post-breakup accommodation space correlates inversely with SDR thickness, being less for magma-rich margins and more for magma-normal/intermediate margins. The Rio Grande Cone, with large sediment thickness, is underlain by small SDR thicknesses allowing large post-breakup accommodation space. A relationship is observed between the amount of volcanic material and the two-way travel time (TWTT) of first volcanics: first volcanics are observed between 1.2 and 2.2 s TWTT for the highly magmatic Torres High profile, while, in contrast, for the normally magmatic profiles in the south, first volcanics are observed between 4.2 and 6.5 s TWTT. The observed inverse relationship between post-breakup accommodation space and SDR thickness is consistent with predictions by a simple isostatic model of continental lithosphere thinning and magmatic addition melting during breakup. The methodology that we use in this paper provides a new approach for investigating the complex magmatic and sedimentary evolution of rifted continental margins.

Influencing Factors and Model of Shallow Gas Enrichment in the Quaternary Sediments of the Qiongdongnan Basin, South China Sea

Investigating the primary influencing factors that regulate the enrichment of shallow gas not only deepens our understanding of the rules governing shallow gas enrichment in deep-ocean environments but also has the potential to enhance the success rate of locating shallow gas reservoirs. Recent drilling activities in the LS36 gas field located in the central Qiongdongnan Basin have revealed a substantial shallow gas reserve within the sediments of the Quaternary Ledong Formation, marking it as the first shallow gas reservoir discovered in the offshore region of China with confirmed natural gas geological reserves surpassing 100 billion cubic meters. However, the formation mechanism and influencing factors of shallow gas enrichment remain elusive due to the limited availability of 3D seismic and well data. This study employs seismic interpretation and digital simulation to decipher the dynamics of shallow gas accumulation and utilizes the carbon isotope composition of methane to ascertain the origin of the shallow gas. Our results show that the shallow gas is primarily concentrated within a large-scale submarine fan, covering a distribution region of up to 2800 km2, situated in the deep-sea plain. The δ13 C1 methane carbon isotope data ranges from −69.7‰ to −45.2‰ and all δ13 C2 values are above −28‰, suggesting that the shallow gas within the Ledong Formation is derived from a mix of biogenic gas produced in shallow strata and thermogenic gas generated in deeper source rocks. The results of gas sources, seismic profiles, and digital simulations suggest that thermogenic gas originating from the Lingshui and Beijiao sags was transported to the Quaternary submarine fan via a complex system that includes faults, gas chimneys, and channel sands. The mass-transported deposits (MTDs) in the upper reaches of the submarine fan have effectively acted as a seal, preventing the escape of shallow gas from the fan. Therefore, the factors contributing to the enrichment of shallow gas in the Qiongdongnan Basin include the presence of favorable submarine fan reservoirs, the availability of two distinct gas sources, the effective sealing of MTDs, and the presence of two efficient transport pathways. A conceptual model for the accumulation of shallow gas is developed, illuminating the complex formation–migration–accumulation process. This study underscores the importance of aligning multiple influencing factors in the process of shallow gas accumulation, and the suggested accumulation model may be pertinent to shallow gas exploration in other marginal sea basins.

Integrating Multimodal Deep Learning with Multipoint Statistics for 3D Crustal Modeling: A Case Study of the South China Sea

Constructing an accurate three-dimensional (3D) geological model is crucial for advancing our understanding of subsurface structures and their evolution, particularly in complex regions such as the South China Sea (SCS). This study introduces a novel approach that integrates multimodal deep learning with multipoint statistics (MPS) to develop a high-resolution 3D crustal P-wave velocity structure model of the SCS. Our method addresses the limitations of traditional algorithms in capturing non-stationary geological features and effectively incorporates heterogeneous data from multiple geophysical sources, including 44 wide-angle seismic crustal structure profiles obtained by ocean bottom seismometers (OBSs), gravity anomalies, magnetic anomalies, and topographic data. The proposed model is rigorously validated against existing methods such as Kriging interpolation and MPS alone, demonstrating superior performance in reconstructing both global and local spatial features of the crustal structure. The integration of diverse datasets significantly enhances the model’s accuracy, reducing errors and improving the alignment with known geological information. The resulting 3D model provides a detailed and reliable representation of the SCS crust, offering critical insights for studies on tectonic evolution, resource exploration, and geodynamic processes. This work highlights the potential of combining deep learning with geostatistical methods for geological modeling, providing a robust framework for future applications in geosciences. The flexibility of our approach also suggests its applicability to other regions and geological attributes, paving the way for more comprehensive and data-driven investigations of Earth’s subsurface.

Radon-domain acoustic and elastodynamic interferometric redatuming of VSP data

Summary The virtual source method (VSM) is a useful tool for imaging and monitoring below complex and time-varying overburden. When it is applied to VSP geometries, the redatumed virtual source data often suffer from artifacts and aliasing due to the violation of theoretical acquisition conditions and partial focusing of virtual multiples, which further degrade seismic imaging quality. While the conventional Radon-domain VSM (R-VSM) mitigates these issues to some extent, it is still possible to improve upon the imaging. This study develops a simple and effective high-resolution Radon-domain VSM (HR-VSM) to effectively address these issues, offering superior noise and artifact suppression compared to traditional VSM and R-VSM. HR-VSM shows a strong performance across a wide range of VSP configurations and data types, especially in applications to multi-component and passive seismic data, demonstrating its versatility and effectiveness in seismic exploration and showing potential for use in earthquake seismology. To extend subsurface illumination, we combined correlation-type and convolution-type HR-VSM for automatically redatuming virtual surface seismic profile (SSP) shot gathers with a complete receiver array covering all surface source locations, without the additional pre-processing steps typically required by VSM. It was also tested on reverse VSP (RVSP) synthetic active data and passive seismic data, proving effective in constructing virtual shot gathers and showing potential for extending its use to earthquake data and ambient-noise seismology. Moreover, HR-VSM can perform elastodynamic interferometric redatuming, enabling the redatuming of pure P-P and pure P-SV waves from multi-component VSP data. We applied HR-VSM to redatum virtual single well profile (SWP) data containing fault-related P-P and P-SV reflections from VSP data, which were further used for fault imaging. Finally, HR-VSM was used to generate virtual crosswell data with receivers in both boreholes, eliminating the need for downhole sources. The obtained virtual crosswell containing direct waves, as well as P-P and P-SV reflections, enable constructing a velocity model and imaging the structure between wells.

Recent ice‐contact delta formation in front of Pio XI glacier controls sedimentary processes in Eyre Fjord, Patagonia

AbstractPio XI Glacier (49°S) is the largest and one of the very few advancing glaciers in Patagonia. Satellite data indicate that the main glacier terminus transitioned from calving to land‐based around 2010, effectively resulting in the formation of an ice‐contact delta at the head of Eyre Fjord. Here, we investigate how this ice‐contact delta formation affected sediment transport processes in Eyre Fjord. Sediment cores and seismic profiles collected along the fjord provide evidence for a relatively abrupt increase in the number and magnitude of turbidity currents, coeval with the formation of the ice‐contact delta. This observation is supported by modern summer hydrographic observations and bathymetric data. We posit that the ice‐contact delta formation resulted in sediment input being concentrated at specific subaerial locations across the fjord head, which favoured the development of plume‐triggered turbidity currents. This suggests that a sudden increase in turbidite thickness in fjord sediment records could represent ice‐contact delta development at fjord heads.

Do gravity data justify a rifted “Liguro-Provençal Basin”?

The geodynamic evolution of the Liguro-Provençal Basin and its crust and upper mantle structure remain debated, especially regarding the role of rifting in continental break-up and seafloor spreading. Our study incorporates updated datasets, including new gravity maps from the AlpArray Gravity Working Group (complete Bouguer, free air, and isostatic anomalies) for 3D modeling and gravity field analysis, seismic data from Lobster offshore campaigns for direct comparison, and geodynamic models, supplemented by seismic profiles from previous French and Italian campaigns to constrain the interpretation. We used GFZ’s IGMAS + software for interactive 3D modeling, creating a density model extending to 300 km depth that includes crustal and upper mantle inhomogeneities based on prior geodynamic models. This hybrid approach, with polygonal structures for the crust and voxels for the upper mantle, clarifies individual contributions to the gravity field. Extending initial gravity modeling from the SPP MB4D project INTEGRATE, our work provides a consistent 3D density model for the Alps and Ligurian Basin. The constrained 3D modeling and numerical analyses (terracing, clustering, filtering, curvature), along with vertical stress and gravitational potential energy calculations, suggest that rifting has significantly influenced the basin’s geological evolution.

Spectral decomposition predicts the distribution of steep slope fans in the rift basin of eastern China

Deep reservoirs associated with gravity-flows are garnering considerable attention. Predicting reservoirs deposited by nearshore subaqueous fans is challenging and often underreported in seismic sedimentology analysis. Utilizing post-stack seismic attributes is a quick and straightforward method for quantitatively characterizing these reservoirs. However, reservoir prediction deteriorates when dealing with complex sedimentary volumes and intricate tectonic development. Spectral decomposition (SD) offers an alternative approach to optimize the seismic data. The frequency-dependent S-transform (ST) holds great potential in seismic interpretation. SD based on the ST was employed in the seismic sedimentary characterization of steep slope complex fan reservoirs. Three fourth-order sequence stratigraphic boundaries and three complex fans were ideally shown on seismic frequency decomposition profiles. A 20 Hz seismic sedimentology analysis frequency was determined by comparing three spectral decomposition results following the well-seismic reflection analysis. The internal architectures of fan deltas and the individual outlines of nearshore subaqueous fans were more distinguishable in 20-Hz frequency decomposition data than in full-frequency data. The progradation direction of steep slope fans can be better recognized in frequency decomposition profiles compared to full-frequency seismic data. Three factors influence the seismic sedimentary characterization and prediction of steep slope fans when employing SD. The ability of the ST to preserve phase is crucial for improving the imaging quality of the amplitude attribute. Sedimentary mechanisms control the sedimentary features of steep slope fans, impacting the imaging of seismic attributes. While channelized fan deltas can be better identified, unchannelized nearshore subaqueous fan deposits, which exhibit more heterogeneous sedimentary characteristics, present limitations. The unique volcanic evolution is another factor that impacts the image of the root-mean-square (RMS) attribute. Despite demonstrating excellent local adaptability in signal analysis, the S-transform cannot fully compensate for the combined effects of faults and sedimentary heterogeneity in nearshore subaqueous fans.

Geophysical Monitoring Technologies for the Entire Life Cycle of CO2 Geological Sequestration

Geophysical monitoring of CO2 geological sequestration represents a critical technology for ensuring the long-term safe storage of CO2 while verifying its characteristics and dynamic changes. Currently, the primary geophysical monitoring methods employed in CO2 geological sequestration include seismic, fiber optic, and logging technologies. Among these methods, seismic monitoring techniques encompass high-resolution P-Cable three-dimensional seismic systems, delayed vertical seismic profiling technology, and four-dimensional distributed acoustic sensing (DAS). These methods are utilized to monitor interlayer strain induced by CO2 injection, thereby indirectly determining the injection volume, distribution range, and potential diffusion pathways of the CO2 plume. In contrast, fiber optic monitoring primarily involves distributed fiber optic sensing (DFOS), which can be further classified into distributed acoustic sensing (DAS) and distributed temperature sensing (DTS). This technology serves to complement seismic monitoring in observing interlayer strain resulting from CO2 injection. The logging techniques utilized for monitoring CO2 geological sequestration include neutron logging methods, such as thermal neutron imaging and pulsed neutron gamma-ray spectroscopy, which are primarily employed to assess the sequestration volume and state of CO2 plumes within a reservoir. Seismic monitoring technology provides a broader monitoring scale (ranging from dozens of meters to kilometers), while logging techniques operate at centimeter to meter scales; however, their results can be significantly affected by the heterogeneity of a reservoir.

West Siberian sedimentary basin. Crustal subsidence caused by rock contraction in its lower part due to prograde metamorphism

The history of the crustal subsidence in the Mesozoic and Cenozoic in the West Siberian Basin – the largest sedimentary basin in the world – is considered. Most researchers associate its formation with post-rift subsidence of the crust, which followed an episode of strong lithospheric stretching about 250 million years ago near to the Permian to the Triassic transition. A characteristic feature of post-rift subsidence is a decrease in its rate in time. During the Mesozoic-Cenozoic history, in Western Siberia the rate of crustal subsidence should have slow down by an order of magnitude. However, the analysis of long (700–900 km) seismic profiles in the north of Western Siberia and in the Southern Kara Sea shows that since the beginning of the Mesozoic in these regions, on average, there has been an acceleration of the crustal subsidence. Under such circumstances, lithospheric stretching in them could be responsible for only a small part of the total subsidence of the crust of 6–7 km. In Western Siberia, the Earth’s crust is close to the isostatic equilibrium. Then, in the absence of strong stretching, the accumulation of thick sedimentary sequences in the basin could only have been caused by rock contraction in the lower crust due to prograde metamorphic reactions. To obtain the above results, we used, for the first time, some simple methods to analyze the structure of the sedimentary cover in the West Siberian Basin. Detailed seismic profiles have been published for many other deep basins on all the continents. The methods of their interpretation implemented in this paper can be easily applied to determine the role of lithospheric stretching in the formation of deep sedimentary basins on the global scale.

Petroleum system analysis of Fujairah basin, eastern offshore of the United Arab Emirates

The Fujairah basin, located on the eastern margin of the United Arab Emirates, forms part of the hinterland basin of the Oman-UAE mountains. Despite its geological significance, the hydrocarbon potential of this basin remains unexplored. This study aims to address this knowledge gap by using 2D seismic reflection data, three exploration wells, geochemical data from one well, a 2D velocity section, and two pseudo-wells. The study began with the interpretation of the seismic profiles and then proceeded to create depth maps for the most significant units. We used Rock-Eval pyrolysis plots to identify the primary source rocks and to classify their kerogen types. The seismic interpretation formed a basis for the 1D and 2D basin modeling techniques that are used to determine the petroleum system of the basin. Our results identify the Pliocene, Miocene, and Eocene sequences as potential source rocks in the basin with TOC values less than 1 wt% and low expulsion efficiencies. The Pliocene and Miocene source rocks are mainly type-II kerogen, whereas most Eocene samples are characterized as type-III kerogen. The Pliocene and Miocene source rocks are immature in the basin. The Eocene is mature depending on the burial within the sub-basins. The Eocene started expelling hydrocarbons during the Burdigalian, which was linked to the collision of the Arabian and Central Iran plates along the Zagros suture zone. Structural and stratigraphic traps may have entrapped the generated hydrocarbons. The three drilled wells in the basin lack good reservoir rocks. However, low-velocity anomalies and bright spots indicate possible hydrocarbon accumulations in the basin.

Evolution of a buried moat-drift system within the Ewing Terrace uncovering highly dynamic bottom currents at the Argentine Margin during Early Oligocene to Middle Miocene

The Ewing Terrace is a relatively flat surface formed by the action of bottom currents and part of a Contourite Depositional System (CDS) at the Argentine continental slope. It is situated in a highly complex oceanographic setting at the Brazil-Malvinas Confluence Zone. Located in water depths of approx. 1000 – 1200 m and incised by the Mar del Plata Canyon, the Ewing Terrace is separated into the Northern Ewing Terrace (NET) and the Southern Ewing Terrace (SET). The long-term variations in ocean circulation led to a complex internal architecture of the terrace. As a result, this region represents a unique archive for studying sedimentary features that were eroded, transported, and deposited by along- and down-slope processes. An in-depth data analysis of high-resolution multichannel seismic profiles exhibits a complex sequence of erosional and depositional contouritic features, namely buried moat-drift systems identified in depths of approx. 370-750 m below the seafloor. They are arranged in migrating sequences and clustered in the Early Oligocene to Middle Miocene. This pattern is probably attributable to the vertical shift of water masses and to a highly dynamic oceanographic setting with spatial changes influenced by the Brazil-Malvinas Confluence Zone over this particular geological time. The moat-drift systems reveal significant lateral changes from north to south. In the southern area of the SET the moats are constructional and the associated separated mounded drifts are well developed. In contrast, the northern area exhibits two types of moats, reminiscent of cut-and-fill structures that mirror the significant and rapid changes in bottom current dynamics. With these new insights, this study contributes to a better understanding of moat-drift systems and improves the knowledge about past oceanographic dynamics and sediment deposition at the northern Argentine margin.

Study of seismic activity in the Haiyuan-Liupanshan region using automated microseismic detection techniques

Using continuous waveform data from 27 fixed seismic stations in Ningxia spanning nearly a decade from 2013 to September 2022, the automatic detection matching method (PALM) was employed to capture 34,373 seismic events across the region, which is twelve times more than manual cataloging during the same period. The events were used as a template to search for smaller seismic events in the Haiyuan-Liupanshan region. After location, a total of 14,741 microseismic events were detected. Based on this expanded dataset, we calculated b value and analysis the depth profiles of seismic. The findings indicate that the distribution of microseismicity has characteristics of zonation, clustering and interruption. Seismic activity aligns with active faults and closely correlates with tectonic zones. The areas with seismic gaps and low b-value zones indicate a higher stress level on the north side of the middle section of the Haiyuan Fault, which was also the epicenter of the magnitude 4.9 Pingchuan earthquake on December 31, 2023. The seismic profiles show that the regional earthquakes mainly occur at a depth of more than 30 km. The depth distribution of these earthquakes reflects the inclination of the fault and thus corresponds exactly to the actual conditions.