Sedimentation Field-flow Fractionation Research Articles

Sedimentation field-flow fractionation for rapid phenotypic antimicrobial susceptibility testing: a pilot study.

The increase in antibiotic resistance is a major public health issue. The development of rapid antimicrobial susceptibility testing (AST) methods is becoming a priority to ensure early and appropriate antibiotic therapy. To evaluate sedimentation field-flow fractionation (SdFFF) as a method for performing AST in less than 3 h. SdFFF is based on the detection of early biophysical changes in bacteria, using a chromatographic-type technology. One hundred clinical Escherichia coli strains were studied. A calibrated bacterial suspension was incubated for 2 h at 37°C in the absence (untreated) or presence (treated) of five antibiotics used at EUCAST breakpoint concentrations. Bacterial suspensions were then injected into the SdFFF machine. For each E. coli isolate, retention times and elution profiles of antibiotic-treated bacteria were compared with retention times and elution profiles of untreated bacteria. Algorithms comparing retention times and elution profiles were used to determine if the strain was susceptible or resistant. Performance evaluation was done according to CLSI and the ISO standard 20776-2:2021 with broth microdilution used as the reference method. AST results from SdFFF were obtained in less than 3 h. SdFFF showed high categorical agreement (99.8%), sensitivity (99.5%) and specificity (100.0%) with broth microdilution. Results for each antimicrobial were also in agreement with the ISO 20776-2 recommendations, with sensitivity and specificity of ≥95.0%. This study showed that SdFFF can be used as a rapid, accurate and reliable phenotypic AST method with a turnaround time of less than 3 h.

Sedimentation Field-Flow Fractionation: A Diagnostic Tool for Rapid Antimicrobial Susceptibility Testing.

Conventional antimicrobial susceptibility testing (AST) methods require 24-48 h to provide results, creating the need for a probabilistic antibiotic therapy that increases the risk of antibiotic resistance emergence. Consequently, the development of rapid AST methods has become a priority. Over the past decades, sedimentation field-flow fractionation (SdFFF) has demonstrated high sensitivity in early monitoring of induced biological events in eukaryotic cell populations. This proof-of-concept study aimed at investigating SdFFF for the rapid assessment of bacterial susceptibility to antibiotics. Three bacterial species were included (Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa) with two panels of antibiotics tailored to each bacterial species. The results demonstrate that SdFFF, when used in "Hyperlayer" elution mode, enables monitoring of antibiotic-induced morphological changes. The percentage variation of the retention factor (PΔR) was used to quantify the biological effect of antibiotics on bacteria with the establishment of a threshold value of 16.8% to differentiate susceptible and resistant strains. The results obtained with SdFFF were compared to that of the AST reference method, and a categorical agreement of 100% was observed. Overall, this study demonstrates the potential of SdFFF as a rapid method for the determination of antibiotic susceptibility or resistance since it is able to provide results within a shorter time frame than that needed for conventional methods (3-4 h vs 16-24 h, respectively), enabling earlier targeted antibiotic therapy. Further research and validation are necessary to establish the effectiveness and reliability of SdFFF in clinical settings.

Isolation of Carbon Black from Soils by Dispersion for Analysis: Quantitation and Characterization by Field Flow Fractionation Techniques.

In the present work, a procedure based on a dispersive medium for carbon black (CB) isolation from soil samples for analysis was proposed for the first time. Polymeric and biological dispersants and a sequential use of both dispersants were assayed. Asymmetrical flow field flow fractionation with dynamic light scattering detector (AF4-DLS) and sedimentation field flow fractionation with multi-angle light scattering detector (SdF3-MALS) were used for CB quantitation and characterization in the achieved dispersions. Soil samples contaminated with CB were processed, and CB isolation depended on the solid size distribution and composition and dispersant nature. More quantitative isolations were achieved for the four soils treated by the biological dispersant. As the organic matter percentage is higher in soil, the CB isolation was better, varying between 75 and 99% with standard deviation (s) ⩽ 2% for all soils. A soil contaminated with a CB-based pigment paste was analyzed, achieving (99 ± 2)% expressed as expanded uncertainty (K = 2) of dispersive isolation by the biological dispersant, and the sampling was scaled to 250 g of soil with positive results. The procedure was completed by CB recovery to obtain a solid residue able to be reused if necessary. For the filter-aided recovery step, different membranes (fiberglass, nylon, and Teflon) with a pore size between 0.1 and 5 μm were tested. The quantitation of the CB retained in the filter was measured by diffuse reflectance spectroscopy. Teflon (0.10 μm) provided better results for CB recovery, and its re-dispersion was also studied with suitable results. Determination of CB from the filters by diffuse reflectance spectrometry provided the same results than AF4 for CB dispersions.

Size Distribution, Elemental Composition and Morphology of Nanoparticles Separated from Respirable Coal Mine Dust

Nanoparticles, defined as particles with one dimension below 100 nm, contribute little to the total mass concentration in respirable coal mine dust (RCMD) toxicological studies, but they could have a considerable part in the adverse health effects by RCMD inhalation. It has been shown that inhaled nanoparticles can penetrate deep into the lung and could plausibly contribute to acute and chronic pulmonary diseases by triggering oxidative stress formation and inducing inflammation. RCMD nanoparticles from samples collected in an underground mine in the United States were analyzed by a particle separation technique, field-flow fractionation (FFF), for size, morphology, and elemental composition. Two sub-techniques, asymmetrical flow field-flow fractionation (AsFlFFF), and sedimentation field-flow fractionation (SdFFF) were used to increase the detection size range. Nanoparticles with a size range between 25–400 nm were detected. Fractions were collected throughout the size distribution and were analyzed by electron microscopy and inductively-coupled plasma mass spectrometry (ICP-MS). Electron micrographs showed the presence of carbonaceous particles, mineral particles, diesel particles, and aggregates. Major and trace elements such as Si and Ca were detected in high abundance in all fractions. Other metals included Mg, Fe, Al, Cs, and Pb. Higher relative concentrations of Cs and Pb were observed at the size range below 30 nm. The data suggests that nanoparticles in RCMD can be highly reactive, either as a result of their size or their potential to carry toxins such as transition and heavy metals. To the best of the authors’ knowledge, this is the first data on the size, morphology, and composition of RCMD nanoparticles with a size below 100 nm.

A Label-Free Cell Sorting Approach to Highlight the Impact of Intratumoral Cellular Heterogeneity and Cancer Stem Cells on Response to Therapies.

Cancer stem cells play a crucial role in tumor initiation, metastasis, and resistance to treatment. Cellular heterogeneity and plasticity complicate the isolation of cancer stem cells. The impact of intra-tumor cellular heterogeneity using a label-free approach remains understudied in the context of treatment resistance. Here, we use the sedimentation field–flow fractionation technique to separate, without labeling, cell subpopulations of colorectal cancer cell lines and primary cultures according to their biophysical properties. One of the three sorted cell subpopulations exhibits characteristics of cancer stem cells, including high tumorigenicity in vivo and a higher frequency of tumor-initiating cells compared to the other subpopulations. Due to its chemoresistance, two- and three-dimensional in vitro chemosensitivity assays highlight the therapeutic relevance of this cancer stem cell subpopulation. Thus, our results reveal the major implication of intra-tumor cellular heterogeneity, including cancer stem cells in treatment resistance, thanks to our label-free cell sorting approach. This approach enables—by breaking down the tumor—the study the individualized response of each sorted tumor cell subpopulation and to identify chemoresistance, thus offering new perspectives for personalized therapy.

P-203 - Isolation of glioblastoma cancer stem cells by sedimentation field flow fractionation for the development of 3D models in supramolecular hydrogels

P-203 - Isolation of glioblastoma cancer stem cells by sedimentation field flow fractionation for the development of 3D models in supramolecular hydrogels

Methodology of measurement of ionic strength based on field-flow fractionation

In this report, we put forward an experimental method to determine the ionic strength of an aqueous solution. To this end, we have developed a theory of ionic strength I expressed in terms of the retention ratios in field-flow fractionation (FFF) as I1/2=κ(1−R)/(1−Ro)−ε−1/2. Here R is a measured retention ratio using an FFF technique, for instance, sedimentation FFF (SdFFF), and Ro is the sterically-corrected standard retention ratio as given by the standard retention theory (SRT) for a latex particle system of diameter d. For a standard latex system with known d (or Ro) and I, we can construct a linear calibration of I1/2 against (1−R)/(1−Ro). Therefore, if we measure the retention ratio R of a carrier liquid of which ionic strength is of interest, then we will be able to estimate the ionic strength from the calibration curve thus built. In this paper, we have demonstrated the relation of I1/2with respect to (1−R)/(1−Ro) for the polystyrene latex systems of which information on R, Ro, and I is available from Ref. [1].

Characterization of Glioblastoma Cancer Stem Cells Sorted by Sedimentation Field-Flow Fractionation Using an Ultrahigh-Frequency Range Dielectrophoresis Biosensor.

Cancer stem cells (CSCs) appear to be an essential target for cancer therapies, in particular, in brain tumors such as Glioblastoma. Nevertheless, their isolation is made difficult by their low content in culture or tumors (<5% of the tumor mass) and is essentially based on the use of fluorescent or magnetic labeling techniques, increasing the risk of differentiation induction. The use of label-free separation methods such as sedimentation field-flow fractionation (SdFFF) is promising, but it becomes necessary to consider a coupling with a detection and characterization method for future identification and purification of CSCs from patient-derived tumors. In this study, we demonstrate for the first time the capability of using an ultrahigh-frequency range dielectrophoresis fluidic biosensor as a detector. This implies an important methodological adaptation of SdFFF cell sorting by the use of a new compatible carrier liquid DEP buffer (DEP-B). After SdFFF sorting, subpopulations derived from U87-MG and LN18 cell lines undergo biological characterization, demonstrating that using DEP-B as a carrier liquid, we sorted by SdFFF subpopulations with specific differentiation characteristics: F1 = differentiated cells/F2 = CSCs. These subpopulations presented high-frequency crossover (HFC) values similar to those measured for standard differentiated (around 110 MHz) and CSC (around 80 MHz) populations. This coupling appeared as a promising solution for the development of an online integration of these two complementary label-free separation/detection technologies.

Application of non-stationary phase separation hyphenated with inductively coupled plasma mass spectrometry in the analysis of trace metal-containing nanoparticles in the environment

环境中金属纳米颗粒的分析检测不仅需要关注其浓度和化学组成,还需要对其形状、粒径和表面电荷等进行表征。此外,环境中金属纳米颗粒的分析需要解决其低赋存浓度以及复杂基质干扰的难题。无固定相分离技术与电感耦合等离子体质谱(ICP-MS)的在线联用,具有较强的颗粒分离能力和较低的元素检出限,能够快速准确地提供金属纳米颗粒的粒径分布、化学组成等信息,在金属纳米颗粒的分离检测方面表现出极大的潜能。但这一联用技术尚无法获得金属纳米颗粒物的颗粒数浓度和单个颗粒的元素信息,难以判断金属纳米颗粒涂层厚度、纯度以及颗粒的均相/异相团聚行为等。新兴的单颗粒-电感耦合等离子体质谱(SP-ICP-MS)与无固定相分离技术的在线联用,可以获得金属纳米颗粒的流体动力学粒径、元素质量计算粒径和颗粒数浓度等信息,进而弥补无固定相分离与ICP-MS在线联用技术的不足。该文介绍了流体动力色谱、毛细管电泳和场流分离3种常用无固定相分离技术的分离机制和适用检测器,着重综述了无固定相分离技术与ICP-MS/SP-ICP-MS在线联用技术的特点及其在环境金属纳米颗粒分析中的应用。关于场流分离,主要介绍了可以与ICP-MS联用的沉降场流分离和流场流分离。该文还对流体动力色谱、毛细管电泳和流场流分离与ICP-MS在线联用技术的特点进行了比较。最后,该文对无固定相分离技术与ICP-MS/SP-ICP-MS在线联用技术的发展提出了展望。

Autophagy inhibition reinforces stemness together with exit from dormancy of polydisperse glioblastoma stem cells.

Therapeutic resistance and infiltrative capacities justify the aggressiveness of glioblastoma. This is due to cellular heterogeneity, especially the presence of stemness-related cells, i.e. Cancer Stem Cells (CSC). Previous studies focused on autophagy and its role in CSCs maintenance; these studies gave conflicting results as they reported either sustaining or disruptive effects. In the present work, we silenced two autophagy related genes -either Beclin1 or ATG5- by shRNA and we explored the ensuing consequences on CSCs markers’ expression and functionalities. Our results showed that the down regulation of autophagy led to enhancement in expression of CSCs markers, while proliferation and clonogenicity were boosted. Temozolomide (TMZ) treatment failed to induce apoptotic death in shBeclin1-transfected cells, contrary to control. We optimized the cellular subset analysis with the use of Sedimentation Field Flow Fractionation, a biological event monitoring- and cell sorting-dedicated technique. Fractograms of both shBeclin1 and shATG5 cells exhibited a shift of elution peak as compared with control cells, showing cellular dispersion and intrinsic sub-fraction modifications. The classical stemness fraction (i.e. F3) highlighted data obtained with the overall cellular population, exhibiting enhancement of stemness markers and escape from dormancy. Our results contributed to illustrate CSCs polydispersity and to show how these cells develop capacity to bypass autophagy inhibition, thanks to their acute adaptability and plasticity.

Challenges in the Physical Characterization of Lipid Nanoparticles.

Nano-sized drug transporters have become an efficient approach with considerable commercial values. Nanomedicine is not only limited to drug delivery by means of different administration routes, such as intravenous, oral, transdermal, nasal, pulmonary, and more, but also has applications in a multitude of areas, such as a vaccine, antibacterial, diagnostics and imaging, and gene delivery. This review will focus on lipid nanosystems with a wide range of applications, taking into consideration their composition, properties, and physical parameters. However, designing suitable protocol for the physical evaluation of nanoparticles is still conflicting. The main obstacle is concerning the sensitivity, reproducibility, and reliability of the adopted methodology. Some important techniques are compared and discussed in this report. Particularly, a comparison between different techniques involved in (a) the morphologic characterization, such as Cryo-TEM, SEM, and X-ray; (b) the size measurement, such as dynamic light scattering, sedimentation field flow fractionation, and optical microscopy; and (c) surface properties, namely zeta potential measurement, is described. In addition, an amperometric tool in order to investigate antioxidant activity and the response of nanomaterials towards the skin membrane has been presented.

A New Label-Free Approach to Glioblastoma Cancer Stem Cell Sorting and Detection

Cancer stem cells (CSCs) play critical roles in cancer, making them important targets for new diagnostic and therapeutic approaches. Since CSCs are heterogeneous and not abundant in tumors, and few specific markers for these cells currently exist, new methods to isolate and characterize them are required. To address this issue, we developed a new label-free methodology to isolate, enrich, and identify CSCs from an heterogeneous tumor cell subpopulation using a cell sorting method (sedimentation field flow fractionation, SdFFF) and a biosensor as a detector. Enrichment was optimized using an original protocol and U87-MG glioblastoma cells cultured in a normal (N) or defined (D) medium (± fetal bovine serum, FBS) under normoxic (N, pO2 = 20%) or hypoxic (H, pO2 < 2%) conditions to obtain four cell populations: NN, NH, DN, and DH. After elution of CSCs via SdFFF using the hyperlayer mode (inertial elution mode for micrometer-sized species), we isolated eight subpopulations with distinct CSC contents based on phenotypical and functional properties, ranging from NN F1 with a lower CSC content to DH F3 with a higher CSC content. Reflecting biological differences, the intrinsic intracellular dielectric permittivity increased from NN to DH conditions. The largest difference in electromagnetic signature was observed between NN F1 and DH F3, in which the CSC content was lowest and highest, respectively. The results demonstrate that microwave dielectric spectroscopy can be used to reliably and efficiently distinguish stem cell characteristics. This new instrumental and methodological approach is an important innovation that allows both enrichment and detection of CSCs, opening the door to novel diagnostic and therapeutic approaches.

Explicit role of ionic strength in retention behavior of polystyrene latex particles in sedimentation field-flow fractionation: Slip boundary model

We investigate an explicit role of the ionic strength in the retention behaviors of polystyrene (PS) latex particles in sedimentation field-flow fractionation (SdFFF) by hinging upon the retention theory recently developed [1] asR=(Ro+vb*)/(1+vb*). Here R is an experimental retention ratio, and Ro is the analytical expression of the standard retention theory based on the parabolic flow velocity. The reduced boundary velocityvb* is expressed in terms of the ionic strength I of the carrier liquid as vb*=vb,o*/(1+εI), where vb,o*=0.070and ε=60 mM−1 for all the PS latex systems under investigation. We then apply this to study the explicit ionic strength effect on the retention behaviors of PS beads of 200, 300, 400, and 500nm, respectively. As a primary result, the strong dependence of the retention ratio on the ionic strength can be quantitatively accounted for in an excellent accuracy: The slip effect at the channel surface is significant, particularly when I≲0.5mM, without showing any distinguishable dependence on the specific additives to control I, such as FL-70, SDS, NaNO3, and NaN3. Based on the present study, we put forward an experimental means to estimate the ionic strength of an aqueous solution using an FFF technique.

Monoolein aqueous dispersions as a delivery system for quercetin.

This study describes the preparation, characterization and in vitro release of monoolein aqueous dispersions (MAD) encapsulating quercetin (QT). As emulsifier, sodium cholate was employed at two different concentrations, namely 0.15% and 0.25% with respect to the total weight of the formulation. Cryogenic Transmission electron microscopy and X-ray analysis indicated that MAD015 are a mixture of vesicles and cubic structures, whilst MAD025 are mainly characterized by unilamellar vesicular structures. Photon correlation spectroscopy (PCS) and Sedimentation Field Flow Fractionation (SdFFF) showed a MAD size higher than 300nm that over 100days from analysis reduces up to 200nm. In vitro Franz cell experiments showed that the two systems had a similar behaviour in the release of QT. Experiments on antioxidant activity of MAD containing QT demonstrated that their activity parallel with the content of encapsulated QT within the MAD formulations produced. Taken together these results allow us to conclude that MAD can be potentially proposed for the delivery of QT.

Isolation of Astrocytes Displaying Myofibroblast Properties and Present in Multiple Sclerosis Lesions.

A wide heterogeneity of lesions can affect the central nervous system (CNS). In all situations where neurons are damaged, including multiple sclerosis (MS), a common reactive astrocytosis is present. Sedimentation field-flow fractionation (SdFFF) was used to sort astrocyte subpopulations. After SdFFF elution, cells, prepared from rat newborn cortex, were cultured and analyzed by immunocytofluorescence for glial fibrillary acidic protein (GFAP) and α-smooth muscle (SM) actin (a specific marker for myofibroblasts) expression. Cell contractile capacity was studied. Samples from patients with MS were also analyzed. Three main fractions (F1, F2, and F3) were isolated and compared with the total eluted population (TP). TP, F1, F2, and F3, contained respectively 74, 96, 12, and 98% of GFAP expressing astrocytes. In F3, astrocytes only expressed GFAP while in F1, astrocytes expressed both GFAP and α-SM actin. In F2 and TP, α-SM actin expression was barely detected. F3-derived cells showed higher contractile capacities compared with F1-derived cells. In one specific case of MS known as Baló's concentric MS, astrocytes expressing both GFAP and α-SM actin were detected. Using SdFFF, a population of astrocytes presenting myofibroblast properties was isolated. This subpopulation of astrocytes was also observed in a MS sample suggesting that it could be involved in lesion formation and remodeling during CNS pathologies.

Engulfment of ceramic particles by fibroblasts does not alter cell behavior

Despite many studies, the impact of ceramic particles on cell behavior remains unclear. The aim of the present study was to investigate the effects of nano-sized ceramic particles on fibroblastic cells. Fibroblasts (dermal fibroblasts freshly isolated from skin samples and WI26 fibroblastic cells) were cultured in a monolayer in the presence of alumina or cerium–zirconia particles (≈50 nm diameter) at two concentrations (100 or 500 μg ml−1). Fluorescent alumina particles were also used. The following properties were analyzed: cell morphology, cytoplasmic ceramic incorporation (using confocal and transmission electron microscopy) and migration (using a silicon insert). Sedimentation field-flow fractionation (SdFFF) was also used to evaluate the rate of incorporation of ceramic particles into the cells. Finally, after treatment with various concentrations of ceramic particles, fibroblasts were also included in a collagen type I lattice constituting a dermal equivalent (DE), and the collagen lattice retraction and cell proliferation were evaluated. In monolayer conditions, the presence of both alumina and cerium–zirconia ceramic particles did not cause any deleterious effects on cultured cells (dermal fibroblast and WI26 cells) and cell fate was not affected in any way by the presence of ceramic particles in the cytoplasm. Confocal (using fluorescent alumina particles) and electron microscopy (using both alumina and cerium–zirconia particles) showed that ceramic particles were internalized in the WI26 cells. Using fluorescent membrane labeling and fluorescent alumina particles, a membrane was observed around the particle-containing vesicles present in the cytoplasm. Electron microscopy on WI26 cells showed the presence of a classical bilayer membrane around the ceramic particles. Interestingly, SdFFF confirmed that some dermal fibroblasts contained many alumina ceramic particles while others contained very few; in WI26 cells, the uptake of alumina ceramic was more homogeneous. In DE, collagen lattice retraction and cell proliferation were unchanged when WI26 fibroblastic cells contained alumina or cerium–zirconia ceramic particles. Our data suggest that ceramic particles are internalized in the cells by endocytosis. The presence of ceramic particles in the cytoplasm has no affect on cell behavior, confirming the excellent biocompatibility of this material and anticipating a minimal harmful effect of potential wear debris.

Study on the Elemental Composition of Environmental Nanoparticles Separated in a Rotating Coiled Column: How Hazardous May Be Urban Dust and Volcanic Ash

Study on the elemental composition of nanoparticles is of great importance due to their high mobility in the environment and ability to penetrate into human organism. A global aspect is the transport of nutrient and toxic elements with environmental nanoparticles, which can serve as a carrier for these elements. Nanoparticles in complex polydisperse environmental samples such as dust, volcanic ash, or soil may represent only about thousandths or less of bulk sample. Therefore, their recovery followed by quantitative determination of analytes is a difficult task. A novel technique, sedimentation field-flow fractionation in a rotating coiled column, was applied to the fractionation of urban dust and volcanic ash samples with water being used as a carrier fluid. nanoand submicron particles have been separated, weighted, characterized by electronic microscopy and static laser light scattering, and then quantitatively analyzed by ICP-AES and ICP-MS (after digestion). In urban street dust samples, the elements that may be of anthropogenic origin (Zn, Cr, Ni, Cu, Cd, Sn, Pb) were found to concentrate mainly in &lt;0.3 and 0.3-1 μm fractions. It has been shown that the concentrations of Cr, Ni, Zn, Pb, Sn in the finest fraction (&lt;0.3 μm) of street dust can be one order of magnitude higher than the concentrations of elements in bulk sample and coarse fractions. For volcanic ash samples, it has been evaluated that nanoparticles may concentrate potentially toxic elements of volcanic gases. The concentrations of Zn, Cu, Pb, Tl, Bi, Sn, As, Sb in the size fraction &lt;0.2 μm can be two orders of magnitude higher than the concentrations of these elements in bulk sample. Hence, measuring the total concentrations of elements in dust and ash leads to underestimation of the hazard of these samples. The proposed approach to the separation and quantitative analysis of environmental nanoparticles can be a powerful tool for risk assessment related to toxic elements in dust, ash, and other particulate matter.

Synthesis of Silica Nanoparticles for the Manufacture of Porous Carbon Membrane and Particle Size Analysis by Sedimentation Field‐Flow Fractionation

Silica nanoparticles were synthesized by emulsion polymerization by mixing ethanol, ammonium hydroxide, water, and tetraethyl orthosilicate. An apparatus was designed and assembled for a large‐scale synthesis of silica nanospheres, which was aimed for uniform mixing of the reactants. Then sedimentation field‐flow fractionation (SdFFF) was used to determin the size distribution of the silica nanoparticles. SdFFF provided mass‐based separation where the retention time increased with the particle size, thus the size distribution of silica nanoparticles obtained from SdFFF appeared more accurate than that from dynamic light scattering, particularly for those having broad and multimodal size distributions. A disk‐shaped porous carbon membrane (PCM) was manufactured for application as an adsorbent by pressurizing the silica particles, followed by calcination. Results showed that PCM manufactured in this study has relatively high surface area and temperature stability. The PCM surface was modified by attaching a carboxyl group (PCM‐COOH) and then by incorporating silver (PCM‐COOH‐Ag). The amount of COOH group on PCM was measured electrochemically by cyclic voltammetry, and the surface area, pore size, pore volume of PCM‐COOH‐Ag by Brunauer–Emmet–Teller measurement. The surface area was 40.65 and reduced to 13.02 after loading a COOH group then increased up to 30.37 after incorporating Ag.

Sedimentation field flow fractionation and optical absorption spectroscopy for a quantitative size characterization of silver nanoparticles

Many advanced industrial and biomedical applications that use silver nanoparticles (AgNPs), require that particles are not only nano-sized, but also well dispersed, not aggregated and not agglomerated. This study presents two methods able to give rapidly sizes of monodispersed AgNPs suspensions in the dimensional range of 20–100nm.The first method, based on the application of Mie’s theory, determines the particle sizes from the values of the surface plasmon resonance wavelength (SPRMAX), read from the optical absorption spectra, recorded between 190nm and 800nm. The computed sizes were compared with those determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS) and resulted in agreement with the nominal values in a range between 13% (for 20nm NPs) and 1% (for 100nm NPs),The second method is based on the masterly combination of the Sedimentation Field Flow Fractionation (SdFFF − now sold as Centrifugal FFF-CFFF) and the Optical Absorption Spectroscopy (OAS) techniques to accomplish sizes and quantitative particle size distributions for monodispersed, non-aggregated AgNPs suspensions. The SdFFF separation abilities, well exploited to size NPs, greatly benefits from the application of Mie’s theory to the UV–vis signal elaboration, producing quantitative mass-based particle size distributions, from which trusted number-sized particle size distributions can be derived. The silver mass distributions were verified and supported by detecting off-line the Ag concentration with the graphite furnace atomic absorption spectrometry (GF-AAS).

Field-flow fractionation of metallic microparticles in a rotating coiled column

The sedimentation field-flow fractionation in a rotating coiled column has been applied to the separation of silumin (aluminum–silicon alloy) microparticles for the first time. The possibility of preparative purification of metallic powders has been estimated.