Hoveyda-Grubbs Second-generation Catalyst Research Articles

Evaluating Catalyst Performance in Synthesizing Hydroxyl-Terminated Polybutadiene by Ring-Opening-Metathesis Polymerization

AbstractHydroxyl-terminated polybutadiene (HTPB) can be synthesized by ring-opening metathesis polymerization (ROMP) in a one-step process using cyclooctadiene in the presence of a hydroxyl-functionalized chain-transfer agent (CTA). However, previous studies have shown that the presence of primary alcohols can lead to the degradation of some ruthenium catalysts and that the hydroxyl end groups may be converted into aldehydes. Here we compare the performance of five ruthenium-based catalysts — Grubbs first-, second-, and third-generation catalysts (G1, G2, and G3, respectively), Hoveyda–Grubbs Z-selective catalyst (HGZ), and Hoveyda–Grubbs second-generation catalyst (HG2) — in ROMP with a CTA containing primary alcohols. We found that HTPB can be rapidly synthesized in a single step using G3 while avoiding end-group isomerization (2.2% aldehyde formation after full conversion is reached in 5 min). This result suggests that G3 may enable a more effective approach to synthesizing HTPB that avoids protecting groups but still maintains high end-group fidelity.

Biodegradable Grubbs-Loaded Artificial Organelles for Endosomal Ring-Closing Metathesis.

The application of transition-metal catalysts in living cells presents a promising approach to facilitate reactions that otherwise would not occur in nature. However, the usage of metal complexes is often restricted by their limited biocompatibility, toxicity, and susceptibility to inactivation and loss of activity by the cell's defensive mechanisms. This is especially relevant for ruthenium-mediated reactions, such as ring-closing metathesis. In order to address these issues, we have incorporated the second-generation Hoveyda-Grubbs catalyst (HGII) into polymeric vesicles (polymersomes), which were composed of biodegradable poly(ethylene glycol)-b-poly(caprolactone-g-trimethylene carbonate) [PEG-b-P(CL-g-TMC)] block copolymers. The catalyst was either covalently or non-covalently introduced into the polymersome membrane. These polymersomes were able to act as artificial organelles that promote endosomal ring-closing metathesis for the intracellular generation of a fluorescent dye. This is the first example of the use of a polymersome-based artificial organelle with an active ruthenium catalyst for carbon-carbon bond formation.

Synthesis of trans-Tetrafluoro(trifluoromethyl)-λ6-sulfanyl (CF3SF4)-Containing Olefins via Cross Metathesis.

The cross-metathesis reactions of trans-tetrafluoro(trifluoromethyl)-λ6-sulfanyl (CF3SF4)-containing olefins expand the repertoire of synthetic transformations of CF3SF4-substituted molecules. Treatment of a primary alkene and 3-CF3SF4-propene with a second-generation Hoveyda-Grubbs catalyst yielded the cross-metathesis product in good yield under very mild conditions (room temperature). CF3SF4-propene undergoes cross metathesis with substrates containing electron-withdrawing groups or electron-donating groups at room temperature or under dichloromethane reflux. The formation of the CF3SF4-propene homodimer and the utility of that dimer to undergo selective cross-metathesis reactions are described.

Aliphatic-Aromatic Polyesters from Naturally Occurring Sinapic Acid through Acyclic-Diene Metathesis Polymerization in Bulk and Green Solvent Cyrene

Green synthesis of renewable alternatives to fossil fuel-based (macro)molecules/polymers is more than ever a necessity. We recently developed a sustainable pathway to produce 6-hydroxy-5,7-dimethoxy-2-naphthoic acid (DMNA), which resembles the fossil-derived 6-hydroxy-2-naphthoic acid, from sinapic acid. To investigate the potential of DMNA as a building block for polymer syntheses, three novel DMNA-derived α,ω-dienes (M1–M3) were synthesized and engaged in acyclic-diene metathesis (ADMET) polymerization in a three-step study to prepare renewable aliphatic-aromatic polyesters (P1–P3). The first step aimed to evaluate the activity of seven commercial metathesis catalysts for the solvent-free ADMET polymerization of M3. Although most of the studied catalysts exhibited good reactivity, the second-generation Hoveyda–Grubbs catalyst (C4) proved the best. The second step was then started by varying the catalyst loading and testing M1 and M2 toward ADMET polymerization. Aliphatic-aromatic polyesters with a number-average molecular weight (Mn) up to 19.4 kDa (Đ = 1.88) were obtained. Furthermore, the results showed that the properties can be finely tuned depending on the monomer and catalyst loading. Thermal analysis demonstrated that the glass transition temperature (Tg) and the temperature at which 5% of the mass is lost (Td5%) varied depending on the alkene chain length. A general thermal trend was established: Tg(P1) > Tg(P2) > Tg(P3) and Td5%(P1) < Td5%(P2) < Td5%(P3). The third step of the ADMET study was to evaluate the tolerance of M1–M3 and C4 toward Cyrene, a green and high boiling point solvent derived from cellulose. The results revealed that Cyrene merits further investigation as a “general” non-toxic solvent for ADMET polymerization of other monomers, particularly those with high melting points.

Stereoselective Synthesis of Benzo[a]quinolizidines via Aerobic DDQ-Catalyzed Allylation and Reductive Cyclization.

Stereoselective synthesis of C4-substituted benzo[a]quinolizidines via redox-controlled catalytic C–C-bond-forming reactions was carried out. Aerobic DDQ-catalyzed allylation of N-Cbz tetrahydroisoquinolines efficiently provided α-allylated products 5, which were transformed to enones 6 via cross-metathesis reactions using the second-generation Hoveyda–Grubbs catalyst. Palladium-catalyzed hydrogenation of 6 prompted alkene reduction, protecting group removal, and intramolecular reductive amination in one step to afford the desired benzo[a]quinolizidines 7 as single diastereomers.

Methylene Capping Facilitates Cross-Metathesis Reactions of Enals: A Short Synthesis of 7-Methoxywutaifuranal from the Xylochemical Isoeugenol.

Four combinations of type-I olefins isoeugenol and 4-hydroxy-3-methoxystyrene with type-II olefins acrolein and crotonaldehyde were investigated in cross-metathesis (CM) reactions. While both type-I olefins are suitable CM partners for this transformation, we observed synthetically useful conversions only with type-II olefin crotonaldehyde. For economic reasons, isoeugenol, a cheap xylochemical available from renewable lignocellulose or from clove oil, is the preferred type-I CM partner. Nearly quantitative conversions to coniferyl aldehyde by the CM reaction of isoeugenol and crotonaldehyde can be obtained at ambient temperature without a solvent or at high substrate concentrations of 2 mol·L-1 with the second-generation Hoveyda-Grubbs catalyst. Under these conditions, the ratio of reactants can be reduced to 1:1.5 and catalyst loadings as low as 0.25 mol % are possible. The high reactivity of the isoeugenol/crotonaldehyde combination in olefin metathesis reactions was demonstrated by a short synthesis of the natural product 7-methoxywutaifuranal, which was obtained from isoeugenol in a 44% yield over five steps. We suggest that the superior performance of crotonaldehyde in the CM reactions investigated can be rationalized by "methylene capping", i.e., the steric stabilization of the propagating Ru-alkylidene species.

Enantioselective Synthesis of Pyrrolizidinone Scaffolds through Multiple-Relay Catalysis.

A triple-tandem protocol for the synthesis of the pyrrolizidinone skeleton has been devised. It involves a cross metathesis-intramolecular aza-Michael reaction-intramolecular Michael addition tandem sequence, starting from N-pentenyl-4-oxo-2-alkenamides and conjugated ketones. In the presence of two cooperative catalysts, namely the second-generation Hoveyda-Grubbs catalyst and (R)-TRIP-derived BINOL phosphoric acid, this multiple-relay catalytic process takes place in good yields and outstanding levels of diastero- and enantioselectivity with the simultaneous generation of three contiguous stereocenters.

Application of New Efficient Hoveyda-Grubbs Catalysts Comprising an N→Ru Coordinate Bond in a Six-Membered Ring for the Synthesis of Natural Product-Like Cyclopenta[b]furo[2,3-c]pyrroles.

The ring rearrangement metathesis (RRM) of a trans-cis diastereomer mixture of methyl 3-allyl-3a,6-epoxyisoindole-7-carboxylates derived from cheap, accessible and renewable furan-based precursors in the presence of a new class of Hoveyda–Grubbs-type catalysts, comprising an N→Ru coordinate bond in a six-membered ring, results in the difficult-to-obtain natural product-like cyclopenta[b]furo[2,3-c]pyrroles. In this process, only one diastereomer with a trans-arrangement of the 3-allyl fragment relative to the 3a,6-epoxy bridge enters into the rearrangement, while the cis-isomers polymerize almost completely under the same conditions. The tested catalysts are active in the temperature range from 60 to 120 °C at a concentration of 0.5 mol % and provide better yields of the target tricycles compared to the most popular commercially available second-generation Hoveyda–Grubbs catalyst. The diastereoselectivity of the intramolecular Diels–Alder reaction furan (IMDAF) reaction between starting 1-(furan-2-yl)but-3-en-1-amines and maleic anhydride, leading to 3a,6-epoxyisoindole-7-carboxylates, was studied as well.

Regio- and Stereo-Specific Chemical Depolymerization of High Molecular Weight Polybutadiene and Polyisoprene for Their Analysis by High-Resolution Fourier Transform Ion Cyclotron Resonance Mass Spectrometry: Comparison with Pyrolysis-Comprehensive Two-Dimensional Gas Chromatography/Mass Spectrometry, Atmospheric Solid Analysis Probe, Direct Inlet Probe-Atmospheric Pressure Chemical Ionization Mass Spectrometry, and Ion Mobility Spectrometry-Mass Spectrometry.

Polybutadiene (PB) and polyisoprene (PI), the two most common polydienes (PD), are involved in a large number of materials and used in a wide variety of applications. The characterization of these polymers by mass spectrometry (MS) continues to be very challenging due to their high insolubility and the difficulty to ionize them. In this work, a cross-metathesis reaction was used to generate end-functionalized acetoxy ionizable oligomers for the structural deciphering of different commercial PB and PI samples. A cross-metathesis reaction was carried out between polymers and the Z-1,4-diacetoxy-2-butene as a chain transfer agent in dichloromethane using a Hoveyda-Grubbs second-generation catalyst. Well-defined acetoxy telechelic structures were obtained and analyzed by Fourier transform ion cyclotron resonance (FTICR) high-resolution MS. However, after depolymerization, low molar mass polyolefins contained some units with different configurations, suggesting an olefin isomerization reaction due to the decomposition of the catalyst. The addition of an electron-deficient reagent such as 2,6-dichloro-1,4-benzoquinone suppressed this isomerization in the case of both Z- and E-PB and PI. Ion mobility spectrometry-mass spectrometry (IMS-MS) and energy-resolved tandem mass spectrometry (ERMS) analyses confirmed a successful isomerization suppression. For comparing the results obtained by depolymerization with classical methods for polymer analysis, pyrolysis-comprehensive two-dimensional gas chromatography/mass spectrometry (Py-GC × GC-MS), atmospheric solid analysis probe (ASAP), and direct inlet probe-atmospheric pressure chemical ionization (DIP-APCI) analyses were performed on the same polymers. This strategy can be applied on a variety of synthetic and natural not yet characterized polymers.

Cross-Metathesis of Methallyl Halides: Concise Enantioselective Formal Total Synthesis of (-)-Presphaerene.

The cross-metathesis (CM) of methallyl halides catalyzed using four different ruthenium-based complexes—Grubbs catalyst, Grubbs second-generation catalyst, Hoveyda-Grubbs second-generation catalyst, and Stewart–Grubbs catalyst—was investigated. When methallyl chloride or bromide was reacted with a model substrate containing a benzyl ether group, the Grubbs catalyst, and Grubbs second-generation catalyst did not promote the reaction well. However, the Hoveyda–Grubbs second-generation catalyst and Stewart–Grubbs catalyst afforded the corresponding products in moderate to good yield with moderate E/Z selectivity. Accordingly, several functionalized methallyl halides were prepared by CM. Various functional groups were well-tolerated in this system when the Stewart–Grubbs catalyst was used. To demonstrate the practical utility of our method, methallyl halide CM was successfully employed for the formal total synthesis of a natural product (–)-presphaerene, in which the precursor of the key cyclopentanecarboxylate intermediate was efficiently prepared in three steps.

MOF Encapsulation of Ru Olefin Metathesis Catalysts to Block Catalyst Decomposition

In the present work, a catalyst variation of the second-generation Hoveyda–Grubbs catalyst, particularly the ammonium-tagged Ru-alkylidene metathesis catalyst AquaMetTM, is under study, not simply to increase the efficiency in olefin metathesis but also the solubility in polar solvents. Moreover, this ionic catalyst was combined with the metal organic framework (MOF) (Cr)MIL-101-SO3−(Na·15-crown-5)+. We started from the experimental results by Grela et al., who increased the performance when the ruthenium catalyst was confined inside the cavities of the MOF, achieving non-covalent interactions between both moieties. Here, using density functional theory (DFT) calculations, the role of the ammonium N-heterocyclic carbene (NHC) tagged and the confinement effects are checked. The kinetics are used to compare reaction profiles, whereas SambVca steric maps and NCI plots are used to characterize the role of the MOF structurally and electronically.

Mono-telechelic polymers by catalytic living ring-opening metathesis polymerization with second-generation Hoveyda–Grubbs catalyst

Mono-telechelic polymers and triblock copolymers were synthesized by catalytic living ROMP with unstabilized 14e−HG2 catalyst.

Regioselective ring-opening metathesis polymerization of limonene oxide-substituted cyclooctene: The highly functional ethylene/vinyl ester copolymers

We present a new cyclooctene monomer with abundant biorenewable limonene oxide as side group via simple esterification, which could be polymerized by ring-opening metathesis polymerization (ROMP) using Hoveyda-Grubbs second-generation catalyst (H2) to afford polymer with remarkably high head-to-tail regioregularity and high trans-stereoregularity, as well as precisely placed ether branches on every eighth backbone carbon. Due to the presence of easily functional oxirane in limonene oxide side chain, the polymer can be efficiently modified by thiol, or dibutyl phosphate that shows impart flame-resistant property, even bearing pendent cyclic carbonate groups by CO2 insertion catalyzed by tetrabutylammonium bromide. In all cases, the main chains of the polymer remain intact. Differential scanning calorimetry (DSC), thermal gravimetric analyzer (TGA) and the microscale combustion calorimeter test (MCC) were used to study the thermal properties and flame retardancy.

Loss and Reformation of Ruthenium Alkylidene: Connecting Olefin Metathesis, Catalyst Deactivation, Regeneration, and Isomerization.

Ruthenium-based olefin metathesis catalysts are used in laboratory-scale organic synthesis across chemistry, largely thanks to their ease of handling and functional group tolerance. In spite of this robustness, these catalysts readily decompose, via little-understood pathways, to species that promote double-bond migration (isomerization) in both the 1-alkene reagents and the internal-alkene products. We have studied, using density functional theory (DFT), the reactivity of the Hoveyda-Grubbs second-generation catalyst 2 with allylbenzene, and discovered a facile new decomposition pathway. In this pathway, the alkylidene ligand is lost, via ring expansion of the metallacyclobutane intermediate, leading to the spin-triplet 12-electron complex (SIMes)RuCl2 (3R21, SIMes = 1,3-bis(2,4,6-trimethylphenyl)-4,5-dihydroimidazol-2-ylidene). DFT calculations predict 3R21 to be a very active alkene isomerization initiator, either operating as a catalyst itself, via a η3-allyl mechanism, or, after spin inversion to give R21 and formation of a cyclometalated Ru-hydride complex, via a hydride mechanism. The calculations also suggest that the alkylidene-free ruthenium complexes may regenerate alkylidene via dinuclear ruthenium activation of alkene. The predicted capacity to initiate isomerization is confirmed in catalytic tests using p-cymene-stabilized R21 (5), which promotes isomerization in particular under conditions favoring dissociation of p-cymene and disfavoring formation of aggregates of 5. The same qualitative trends in the relative metathesis and isomerization selectivities are observed in identical tests of 2, indicating that 5 and 2 share the same catalytic cycles for both metathesis and isomerization, consistent with the calculated reaction network covering metathesis, alkylidene loss, isomerization, and alkylidene regeneration.

Precision Aliphatic Polyesters with Alternating Microstructures via Cross-Metathesis Polymerization: An Event of Sequence Control.

Sequence-regulated polymerization is realized upon sequential cross-metathesis polymerization (CMP) and exhaustive hydrogenation to afford precision aliphatic polyesters with alternating sequences. This strategy is particularly suitable for the arrangement of well-known monomer units including glycolic acid, lactic acid, and caprolactic acid on polymer chain in a predetermined sequence. First of all, structurally asymmetric monomers bearing acrylate and α-olefin terminuses are generated in an efficient and straightforward fashion. Subsequently, cross-metathesis (co)polymerization of M1 and M2 using the Hoveyda-Grubbs second-generation catalyst (HG-II) furnishes P1-P3, respectively. Finally, hydrogenation yields the desired saturated polyesters HP1-HP3. It is noteworthy that the ε-caprolactone-derived unit is generated in situ rather than introduced to tailor-made monomers prior to CMP. NMR and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) results verify the microstructural periodicity of these precision polyesters. Differential scanning calorimetry (DSC) results reflect that polyesters without methyl side groups exhibit crystallinity, and unsaturated polyester samples show higher glass transition temperatures than their hydrogenated counterparts owing to structural rigidity.

Design of Heterogeneous Hoveyda-Grubbs Second-Generation Catalyst-Lipase Conjugates.

Heterogeneous catalysts have been synthesized by the conjugation of Hoveyda–Grubbs second-generation catalyst with a lipase. The catalytic properties of the organometallic compound in solution were firstly optimized, evaluating the activity of Ru in the ring-closing metathesis of diethyldiallymalonate at 25 °C at different solvents and in the presence of different additives. The best result was found using tetrahydrofuran as a solvent. Some additives such as phenylboronic acid or polyetheneglycol slightly improved the activity of the Ru catalyst whereas others, such as pyridine or dipeptides affected it negatively. The organometallic compound immobilized on functionalized-surface materials activated with boronic acid or epoxy groups (around 50–60 µg per mg support) and showed 50% conversion at 24 h in the ring-closing metathesis. Cross-linked enzyme aggregates (CLEA’s) of the Hoveyda–Grubbs second-generation catalyst with Candida antarctica lipase (CAL-B) were prepared, although low Ru catalyst was found to be translated in low conversion. Therefore, a sol–gel preparation of the Hoveyda–Grubbs second-generation and CAL-B was performed. This catalyst exhibited good activity in the metathesis of diethyldiallymalonate in toluene and in aqueous media. Finally, a new sustainable approach was used by the conjugation lipase–Grubbs in solid phase in aqueous media. Two strategies were used: one using lipase previously covalently immobilized on an epoxy-Sepharose support (hydrophilic matrix) and then conjugated with grubbs; and in the second, the free lipase was incubated with organometallic in aqueous solution and then immobilized on epoxy-Sepharose. The different catalysts showed excellent conversion values in the ring-closing metathesis of diethyldiallymalonate in aqueous media at 25 °C.

Mechanochemical Immobilisation of Metathesis Catalysts in a Metal-Organic Framework.

A simple, one-step mechanochemical procedure for immobilisation of homogeneous metathesis catalysts in metal-organic frameworks was developed. Grinding MIL-101-NH2 (Al) with a Hoveyda-Grubbs second-generation catalyst resulted in a heterogeneous catalyst that is active for metathesis and one of the most stable immobilised metathesis catalysts. During the mechanochemical immobilisation the MIL-101-NH2 (Al) structure was partially converted to MIL-53-NH2 (Al). The Hoveyda-Grubbs catalyst entrapped in MIL-101-NH2 (Al) is responsible for the observed catalytic activity. The developed synthetic procedure was also successful for the immobilisation of a Zhan catalyst.

Stereoselective Synthesis of Ezetimibe via Cross-Metathesis of Homoallylalcohols and α-Methylidene-β-Lactams.

Ru-catalyzed cross-metathesis (CM) reaction between β-arylated α-methylidene-β-lactams and terminal olefins was developed. The CM reaction is effectively catalyzed with Hoveyda-Grubbs second-generation catalyst affording corresponding α-alkylidene-β-aryl-β-lactams in good isolated yields (41-83%) with exclusive Z-selectivity. The developed protocol was successfully applied for stereoselective preparation of Ezetimibe, the commercial cholesterol absorption inhibitor.

Hydrogenation of Sodium Oleate in Aqueous Emulsion with the Hoveyda–Grubbs Second-Generation Catalyst

The catalytic hydrogenation of sodium oleate in emulsion form was carried out using the second-generation Ru Hoveyda–Grubbs catalyst in a semibatch reactor. A fast and complete hydrogenation of the C═C bond was observed after a reaction time of 1 h with 0.4 wt % catalyst at 120 °C and 8.27 MPa hydrogen gas. 1H NMR characterization shows that the carboxylic group C═O was preserved without any reduction. The hydrogenated product sodium stearate was thus obtained. Our results show that the Hoveyda–Grubbs second-generation catalyst can maintain its activity for the hydrogenation reactions in an organic solvent free environment. The hydrogenation reaction presented here provides an alternate pathway to manufacture sodium stearate and other saturated fatty acid salts in a greater volume by an environmental friendly “green” process. In addition, this research will benefit the commercial process of catalytic hydrogenation of unsaturated elastomers in latex form.

Synthesis of Novel Renewable Polyesters and Polyamides with Olefin Metathesis

Unsaturated and hydroxyl-functionalized C6-dicarboxylic acids were successfully synthesized via olefin metathesis from methyl vinyl glycolate (MVG), a renewable α-hydroxy C4-ester product from Lewis-acid carbohydrate conversion. Addition of a second-generation Hoveyda–Grubbs catalyst to neat MVG leads to a near quantitative yield of dimethyl-2,5-dihydroxy-3-hexenedioate (DMDHHD). Additional hydrolysis and hydrogenation steps form interesting polymer building blocks like 2,5-dihydroxy-3-hexenedioic acid (DHHDA) and 2,5-dihydroxyadipic acid (DHAA). Their use in polyester and polyamide synthesis is demonstrated after determination of their physical and spectroscopic characteristics. Copolymerization of DHHDA with l-lactic acid for instance produces a cross-linked poly(l-lactic acid-co-DHHDA) polyester. Proof of cross-links is ascertained by NMR and FTIR. Substantial impact on the melting, thermal, and polar properties of PLA are observed already at low amounts of DHHDA (0.1 mol %) in accord with the presence...