Second-generation Catalyst Research Articles

Latency for All: Enabling Latency of Hoveyda-Grubbs Second-Generation Catalysts by Adding Phosphite Ligands.

The Hoveyda-Grubbs catalyst (HG2, M720 Umicore) is among the most widely used catalysts in olefin metathesis reactions. Given the usefulness of HG2 and the great interest in developing latent olefin metathesis catalysts for numerous applications, we developed a method to introduce phosphite molecules as ancillary ligands into the precatalyst framework. This modification alters the geometry of the complex from an active trans-dichloro form to a latent cis-dichloro species. Most unusually, the ligands coordinate to HG2 only in solidified solutions (most likely due to entropic factors), providing latent catalysts that can be activated on demand by heat or light by regenerating the original HG2 catalyst. Of particular interest is the use of these latent catalysts in ring-opening metathesis polymerization (ROMP) reactions and 3D printing methods. Indeed, the novel complexes displayed the required latency toward ROMP monomers, even the most reactive dicyclopentadiene. Irradiation with 405 nm light readily results in the expedited formation of the desired polymers. This novel approach provides a general and straightforward way to access efficient and well-defined latent olefin metathesis catalysts.

Evaluating Catalyst Performance in Synthesizing Hydroxyl-Terminated Polybutadiene by Ring-Opening-Metathesis Polymerization

AbstractHydroxyl-terminated polybutadiene (HTPB) can be synthesized by ring-opening metathesis polymerization (ROMP) in a one-step process using cyclooctadiene in the presence of a hydroxyl-functionalized chain-transfer agent (CTA). However, previous studies have shown that the presence of primary alcohols can lead to the degradation of some ruthenium catalysts and that the hydroxyl end groups may be converted into aldehydes. Here we compare the performance of five ruthenium-based catalysts — Grubbs first-, second-, and third-generation catalysts (G1, G2, and G3, respectively), Hoveyda–Grubbs Z-selective catalyst (HGZ), and Hoveyda–Grubbs second-generation catalyst (HG2) — in ROMP with a CTA containing primary alcohols. We found that HTPB can be rapidly synthesized in a single step using G3 while avoiding end-group isomerization (2.2% aldehyde formation after full conversion is reached in 5 min). This result suggests that G3 may enable a more effective approach to synthesizing HTPB that avoids protecting groups but still maintains high end-group fidelity.

Synthesis of biodiesel from residual oil extracted from spent bleaching earth using spent bleaching earth-supported catalyst

Proper disposal of spent bleaching earth (SBE) is much anticipated to create a circular economy. In this study, a two-pronged approach was employed to utilise SBE from palm oil refinery for its suitability to act as second-generation biofuel feedstock and catalyst. The SBE was first wet-impregnated and doped with potassium hydroxide (KOH) to further enhance the catalytic activity. The hexane-extracted bleached oil of SBE at conditions of 40 g SBE, 1:4 ratio of oil to n-hexane, and 6 hr extraction time was subjected to different transesterification parameters i.e., catalyst loading, oil: methanol ratio, reaction temperature, and reaction time. The obtained catalysts were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, field emission scanning electron microscopy with energy dispersive X-ray, temperature programmed desorption of carbon dioxide (TPD-CO2) and Brunauer-Emmett-Teller (BET) techniques. The N2 adsorption-desorption and TPD-CO2 analyses indicated that SBE/KOH (600 °C) had the highest attainable BET surface area (22.62 m2/g) and basicity (25.82 cm3/g). SBE/KOH (600 °C) exhibited the highest biodiesel yield (80.3%) at the optimised reaction conditions: (80 °C, 2 wt% catalyst loading, 1:20 oil: methanol ratio and 2 h reaction time) compared to 67.3% via the unmodified control. The kinetics study revealed that the experimental results followed the first order reaction kinetics. The activation energy, enthalpy (ΔH) and entropy (ΔS) were determined to be 90.06 kJ/mol, 6.92 × 10−4 kJ/mol and −0.0414 kJ/mol K, respectively while the Gibbs free energy (ΔG) was 15.443 kJ/mol. Overall, SBE has enormous potential as one of the alternative sources for second-generation biofuel production.

(Photoredox) Organocatalysis in the Emergence of Life: Discovery, Applications, and Molecular Evolution.

ConspectusLife as we know it is built on complex and perfectly interlocking processes that have evolved over millions of years through evolutionary optimization processes. The emergence of life from nonliving matter and the evolution of such highly efficient systems therefore constitute an enormous synthetic and systems chemistry challenge. Advances in supramolecular and systems chemistry are opening new perspectives that provide insights into living and self-sustaining reaction networks as precursors for life. However, the ab initio synthesis of such a system requires the possibility of autonomous optimization of catalytic properties and, consequently, of an evolutionary system at the molecular level. In this Account, we present our discovery of the formation of substituted imidazolidine-4-thiones (photoredox) organocatalysts from simple prebiotic building blocks such as aldehydes and ketones under Strecker reaction conditions with ammonia and cyanides in the presence of hydrogen sulfide. The necessary aldehydes are formed from CO2 and hydrogen under prebiotically plausible meteoritic or volcanic iron-particle catalysis in the atmosphere of the early Earth. Remarkably, the investigated imidazolidine-4-thiones undergo spontaneous resolution by conglomerate crystallization, opening a pathway for symmetry breaking, chiral amplification, and enantioselective organocatalysis. These imidazolidine-4-thiones enable α-alkylations of aldehydes and ketones by photoredox organocatalysis. Therefore, these photoredox organocatalysts are able to modify their aldehyde building blocks, which leads in an evolutionary process to mutated second-generation and third-generation catalysts. In our experimental studies, we found that this mutation can occur not only by new formation of the imidazolidine core structure of the catalyst from modified aldehyde building blocks or by continuous supply from a pool of available building blocks but also by a dynamic exchange of the carbonyl moiety in ring position 2 of the imidazolidine moiety. Remarkably, it can be shown that by incorporating aldehyde building blocks from their environment, the imidazolidine-4-thiones are able to change and adapt to altering environmental conditions without undergoing the entire formation process. The selection of the mutated catalysts is then based on the different catalytic activities in the modification of the aldehyde building blocks and on the catalysis of subsequent processes that can lead to the formation of molecular reaction networks as progenitors for cellular processes. We were able to show that these imidazolidine-4-thiones not only enable α-alkylations but also facilitate other important transformations, such as the selective phosphorylation of nucleosides to nucleotides as a key step leading to the oligomerization to RNA and DNA. It can therefore be expected that evolutionary processes have already taken place on a small molecular level and have thus developed chemical tools that change over time, representing a hidden layer on the path to enzymatically catalyzed biochemical processes.

On the stereoselectivity of the cross metathesis of olefins catalyzed by a second-generation catalyst

Stereoselective control of the cross metathesis of olefins is highly desired in synthetic procedures. In this work, guided by thermodynamic and kinetic descriptors calculated using density functional theory methods, we performed an exhaustive exploration of the stereoselectivity of the cross metathesis of allylbenzene and 2-butene-1,4-diyl diacetate, catalyzed by a second-generation Grubbs catalyst. The kinetics of all possible propagation routes resulted in an E/Z 5:1 distribution of the metathesis product, in agreement with the experimental value of 7:1. Structural strain of olefins and activated catalyst was evaluated to reveal insights into the design of stereoselective catalysts within a strain-driven approach.

Synthesis of sulfonyl benzocyclononadienols

We describe a concise, high-yield method for the synthesis of sulfonyl benzocyclononadienols by a two-step synthetic route, including (i) Grignard 1,2-allylation of sulfonyl chalcones, and (ii) sequential ring-closing metathesis of the resulting dienyl tertiary alcohols with Grubbs second-generation catalyst. This protocol provides a highly effective annulation via one carbon-carbon single bond (C-C) and one carbon-carbon double bond (C=C) formations.

Photoredox-Initiated Frontal Ring-Opening Metathesis Polymerization

Herein, we report the development of a photoredox-initiated frontal ring-opening metathesis polymerization (FROMP) chemical system. We found that a ruthenium-based, bis-N-heterocyclic carbene metathesis precatalyst was activated with 9-mesityl-10-phenylacridindium tetrafluoroborate, copper(II) triflate, and a 455 nm light source. This chemistry was used to initiate the FROMP of dicyclopentadiene; once initiated, the heat released from the polymerization sustained a well-controlled reaction front. Variation in copper or metathesis precatalyst loading yielded front speeds ranging from 0.15 to 0.43 mm s-1 and front temperatures ranging from 140 to 205 °C. While the glass transition temperatures of the resultant polymers are lower than those derived with Grubbs' second-generation catalyst, this chemical system provides extended pot life.

Fast Ring-Opening Metathesis Polymerization of Tricyclic Oxanorbornene Derivatives

A new type of tricyclic oxanorbornene monomer was developed for living ring-opening metathesis polymerization (ROMP). A methyl group located at the endoposition of the oxanorbornene bicycle resulted in polymerization kinetics orders of magnitude slower than the corresponding hydrogen-substituted monomers because of steric effects. Both monomers showed well-controlled molecular weights and excellent dispersities with Grubbs’ third-generation catalyst. The slower endomethyl substituted monomers could even be polymerized in a well-controlled manner using Grubbs’ second-generation catalyst. Investigations of random copolymers demonstrated that the steric hindrance only affects the rate of propagation rather than the rate of initiation. Block copolymers between the fast and slow monomers could be prepared with good molecular weight and dispersity control.

Poly(ionic liquid)s with Dicationic Pendants as Gas Separation Membranes.

Poly(norbornene)s and poly(ionic liquid)s are two different classes of attractive materials, which are known for their structural tunability and thermal stabilities, and have been extensively studied as gas separation membranes. The incorporation of ionic liquids (ILs) into the poly(norbornene) through post-polymerization has resulted in unique materials with synergistic properties. However, direct polymerization of norbornene-containing IL monomers as gas separation membranes are limited. To this end, a series of norbornene-containing imidazolium-based mono- and di-cationic ILs (NBM-mIm and NBM-DILs) with different connectivity and spacer lengths were synthesized and characterized spectroscopically. Subsequently, the poly(NBM-mIm) with bistriflimide [Tf2N−] and poly([NBM-DILs][Tf2N]2) comprising homo-, random-, and block- (co)polymers were synthesized via ring-opening metathesis polymerization using the air-stable Grubbs second-generation catalyst. Block copolymers (BCPs), specifically, [NBM-mIM][Tf2N] and [NBM-ImCnmIm] [Tf2N]2 (n = 4 and 6) were synthesized at two different compositions, which generated high molecular weight polymers with decent solubility relative to homo- and random (co)polymers of [NBM-DILs] [Tf2N]2. The prepared BCPs were efficiently analyzed by a host of analytical tools, including 1H-NMR, GPC, and WAXD. The successfully BCPs were cast into thin membranes ranging from 47 to 125 μm and their gas (CO2, N2, CH4, and H2) permeations were measured at 20 °C using a time-lag apparatus. These membranes displayed modest CO2 permeability in a non-linear fashion with respect to composition and a reverse trend in CO2/N2 permselectivity was observed, as a usual trade-off behavior between permeability and permselectivity.

Merging Grubbs second-generation catalyst with photocatalysis enables Z-selective metathesis of olefins: scope, limitations, and mechanism.

Olefin cross-metathesis is a cornerstone reaction in organic synthesis where stereoselectivity is typically governed by the structure of the catalyst. In this work, we show that merging Grubbs second generation catalyst, a classical E-selective catalyst, with a readily available photocatalyst, enables the exclusive formation of the contra-thermodynamic Z-isomer. The scope and limitations of this unprecedented approach are discussed based on both computational and experimental mechanistic data.

Xylose-Based Polyethers and Polyesters Via ADMET Polymerization toward Polyethylene-Like Materials

One of the challenges of developing bioderived polymers is to obtain materials with competitive properties. This study investigates the structure-properties relationships of polyesters and polyethers that can be derived from d-xylose through metathesis polymerization, in order to produce bioderived plastic materials that are sourced from sustainable feedstocks and whose properties can compete with those of polyolefins such as polyethylene. Bicyclic diol 1,2-O-isopropylidene-α-d-xylofuranose was coupled with ω-unsaturated fatty acids and alcohols of different chain lengths (C11, C5, C3), and the resulting α,ω-unsaturated esters and ethers polymerized via an acyclic diene metathesis (ADMET) polymerization using a commercial Grubbs second-generation catalyst, obtaining polymers with Mn up to 63.0 kg mol–1. Glass transition temperatures (Tg) decreased linearly with increasing chain length and were lower for polyethers (−32 to 14 °C) compared to polyesters (−14 to 45 °C). ADMET polymers could be modified postpolymerization by reacting their internal carbon–carbon double bonds. Thiol–ene reaction with methyl thioglycolate lowered the Tg while allowing insertion of additional functional groups. Alkene hydrogenation turned the polyester and polyether with C20 hydrocarbon linkers into semicrystalline polymers with Tm ≈ 50 °C. The latter, when cast into films, displayed remarkable polyethylene-like properties. Hot-pressed films proved ductile materials (Young modulus Ey 60–110 MPa, elongation at break εb 670–1000%, ultimate tensile strength σb 8–10 MPa), while uniaxially oriented films proved very strong yet flexible materials (Ey 190–200 MPa, εb 160–350%, σb 43–66 MPa). Gas barrier properties were comparable to those of commercial polyolefins. Polyethers were resistant to hydrolysis, while polyesters depolymerized under alkaline conditions.

Comparison of the Spectroscopically Measured Catalyst Transformation and Electrochemical Properties of Grubbs' First- and Second-Generation Catalysts.

According to UV–vis spectroscopy (0.10 mM, CH2Cl2 at 25 °C), the catalyst transformation (which could possibly include ligand dissociation with active catalyst formation, dimer formation, and decomposition) rate constants (kobs) of Grubbs’ first (1) and second (2) generation catalysts are 7.48 × 10–5 and 1.52 × 10–4 s–1, respectively. From 31P NMR (0.1 M, CD2Cl2, at 25 °C), the catalyst transformation was 5.1% for 1 and 16.5% for 2 after 72 h. However, due to the larger concentrations of the NMR samples compared to the UV–vis samples, the extent of transformation did not correspond. The oxidation potential of the RuII/RuIII couple of 2 (E°’ = 27.5 mV at v = 200 mV s–1) was considerably lower than that of 1 (E°’ = 167 mV at v = 200 mV s–1). In the case of 1, a second reduction peak appeared at slow scan rates. This may probably be ascribed to an electrochemically active compound that was formed from the intermediate cation 1•+ and the subsequent reduction of the latter. The oxidation/reduction of 1 proceeds according to an ErCi electrochemical mechanism (Er = electrochemically reversible step, Ci = chemically irreversible step), whereas 2 proceeds according to an ErCr electrochemical mechanism (Er = electrochemically reversible step, Ci = chemically reversible step).

Synthesis of core-shell bottlebrush polymers of poly(polycaprolactone-b-polyethylene glycol) via ring-opening metathesis polymerization

This research was focused on the synthesis of core-shell bottlebrush polymer poly(PCL-b-PEG) (PCL: polycaprolactone; PEG: polyethylene glycol) through a combination of ring-opening polymerization (ROP) and ring-opening metathesis polymerization (ROMP). Three main steps were involved in this synthesis: firstly, the ROP of ε-caprolactone was conducted to form an amphiphilic linear polymer PEG-b-PCL in presence of methoxypolyethylene glycols and Sn(Oct)2; secondly, macromonomers with norbornenyl-functionalization were synthesized by the esterification of the hydroxyl-terminated PEG-b-PCL with 5-norbornene-2-carboxylic acid; thirdly, the synthesized macromonomers were further polymerized by ROMP in presence of Grubbs second-generation catalyst to form a core-shell bottlebrush structured polymer. The effects of the reaction time, concentrations of small-molecule monomers, amount of catalyst and the molecular weights of macromonomers on the performance of the ROMP of the macromonomers were investigated in detail. 1H NMR and GPC analyses confirmed the structures of the resulting polymers. DSC, XRD, TGA were used to characterize the properties of PEG-b-PCL and poly(PCL-b-PEG). Compared with the linear block polymers PEG-b-PCL, the resulting polymers with core-shell bottlebrush structures have a more regular chain arrangement and better thermal stability.

Efficient Design to Monitor the Site‐specific Sustained Release of a Non‐Emissive Anticancer Drug

A pH-responsive smart nanocarrier with significant components was synthesized by conjugating the non-emissive anticancer drug methyl orange and polyethylene glycol derived folate moiety to the backbone of polynorbornene. Complete synthesis procedure and characterization methods of three monomers included in the work: norbornene-derived Chlorambucil (Monomer 1), norbornene grafted with polyethylene glycol, and folic acid (Monomer 2) and norbornene attached methyl orange (Monomer 3) connected to the norbornene backbone through ester linkage were clearly discussed. Finally, the random copolymer CHO PEG FOL METH was synthesized by ring-opening metathesis polymerization (ROMP) using Grubbs' second-generation catalyst. Advanced polymer chromatography (APC) was used to find the final polymer's molecular weight and polydispersity index (PDI). Dynamic light scattering, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were utilized to explore the prodrug's size and morphology. Release experiments of the anticancer drug, Chlorambucil and the coloring agent, methyl orange, were performed at different pH and time. Cell viability assay was carried out for determining the rate of survived cells, followed by the treatment of our final polymer named CHO PEG FOL METH.

Selective Ring-Opening Allene Metathesis: Polymerization or Ruthenium Vinylidene Formation.

Selective ring-opening allene metathesis polymerization (ROAlMP) and ruthenium vinylidene formation from 1,2-cyclononadiene (1) by simple catalyst selection are discussed. Grubbs second-generation catalyst (G2) favors the formation of an alkylidene leading to the ROAlMP of (1). Grubbs first-generation catalyst (G1) favors vinylidene formation and prevents the homopolymerization of (1) even at elevated temperatures. Isolation and characterization of poly(1) by NMR analysis and MALDI-TOF confirms the generation of a well-defined polyallene that exhibits good thermal stability (TD ca. 390 °C) and fluorescent properties. Ring-opening metathesis polymerization (ROMP) of a highly strained norbornene derivative (NBE-iPr) at 80 °C using the ruthenium vinylidene generated from (1) is also investigated. The discovery of ROAlMP allows for the simple access of well-defined polyallenes from commercially available catalysts and will ultimately guide structure-property determinations of polyallenes.

Periodically Functionalized Linear Polyethylene with Tertiary Amino Groups via Regioselective Ring-Opening Metathesis Polymerization

Polymeric materials modified with tertiary amino groups exhibit attractive properties for use in aqueous environments. Ring-opening metathesis polymerization (ROMP) is one of the versatile tools to synthesize functionalized polymers; however, the ROMP of monocyclic cycloolefins with tertiary amino groups is challenging because of the polymerization inhibition by the nitrogen atom coordination to the catalyst center. In this study, the ROMP of tertiary amino-functionalized monocyclic cycloolefins was first accomplished in high yield by utilizing the regioselective ROMP of 3-substituted cycloheptene (CHE) and cyclooctene (COE). This study suggests that the regioselective ROMP, which is achieved by the steric repulsion between the N-heterocyclic carbene ligand of the Grubbs second-generation catalyst and the functional group, might contribute to inhibit the coordination of donor functional groups to the Ru catalytic center, resulting in high monomer conversions. Head-to-tail regioregular polymers with tertiary amino side chains on every seventh and eighth backbone carbons, poly{3-[2-(N,N-dialkylamino)ethoxycarbonyl]-1-cycloolefin}s [P(3DR-CHE)s and P(3DR-COE)s, R = methyl and ethyl], were successfully synthesized. Hydrogenation that followed afforded the regioregular model linear poly[ethylene-co-2-(N,N-dialkylamino)ethyl acrylate] copolymers (alkyl = methyl and ethyl). The obtained novel amino-functionalized polymers exhibited unique behaviors in hydration, crystallization, and coating stability under physiological aqueous environment.

High molar mass poly(ricinoleic acid) via entropy-driven ring-opening metathesis polymerization

High molar mass poly(ricinoleic acid) was synthesized via entropy-driven ring-opening metathesis polymerization of mono-, di- and mixed macrolactones of ricinoleic acid using a Grubbs second-generation catalyst and fully characterized.

Photoexcitation of Grubbs' Second-Generation Catalyst Initiates Frontal Ring-Opening Metathesis Polymerization.

In this work, a simple method is reported for control over initiation in frontal ring-opening metathesis polymerization (FROMP). This noncontact approach uses 375 nm light to excite Grubbs' second-generation catalyst in the presence of a phosphite inhibitor. Photoinitiated FROMP of dicylcopentadiene (DCPD) displays a similar cure profile to that of its thermally initiated counterpart, yielding a robust polymer with high glass transition temperature. Furthermore, this system is applied to enhance reaction rates in conventional ring-closing metathesis reactions.

Regio- and Stereo-Specific Chemical Depolymerization of High Molecular Weight Polybutadiene and Polyisoprene for Their Analysis by High-Resolution Fourier Transform Ion Cyclotron Resonance Mass Spectrometry: Comparison with Pyrolysis-Comprehensive Two-Dimensional Gas Chromatography/Mass Spectrometry, Atmospheric Solid Analysis Probe, Direct Inlet Probe-Atmospheric Pressure Chemical Ionization Mass Spectrometry, and Ion Mobility Spectrometry-Mass Spectrometry.

Polybutadiene (PB) and polyisoprene (PI), the two most common polydienes (PD), are involved in a large number of materials and used in a wide variety of applications. The characterization of these polymers by mass spectrometry (MS) continues to be very challenging due to their high insolubility and the difficulty to ionize them. In this work, a cross-metathesis reaction was used to generate end-functionalized acetoxy ionizable oligomers for the structural deciphering of different commercial PB and PI samples. A cross-metathesis reaction was carried out between polymers and the Z-1,4-diacetoxy-2-butene as a chain transfer agent in dichloromethane using a Hoveyda-Grubbs second-generation catalyst. Well-defined acetoxy telechelic structures were obtained and analyzed by Fourier transform ion cyclotron resonance (FTICR) high-resolution MS. However, after depolymerization, low molar mass polyolefins contained some units with different configurations, suggesting an olefin isomerization reaction due to the decomposition of the catalyst. The addition of an electron-deficient reagent such as 2,6-dichloro-1,4-benzoquinone suppressed this isomerization in the case of both Z- and E-PB and PI. Ion mobility spectrometry-mass spectrometry (IMS-MS) and energy-resolved tandem mass spectrometry (ERMS) analyses confirmed a successful isomerization suppression. For comparing the results obtained by depolymerization with classical methods for polymer analysis, pyrolysis-comprehensive two-dimensional gas chromatography/mass spectrometry (Py-GC × GC-MS), atmospheric solid analysis probe (ASAP), and direct inlet probe-atmospheric pressure chemical ionization (DIP-APCI) analyses were performed on the same polymers. This strategy can be applied on a variety of synthetic and natural not yet characterized polymers.

Lewis Acid-Catalyzed Vinyl Acetal Rearrangement of 4,5-Dihydro-1,3-dioxepines: Stereoselective Synthesis of cis- and trans-2,3-Disubstituted Tetrahydrofurans.

Lewis acid-catalyzed rearrangements of 4,5-dihydro-1,3-dioxepines have been investigated. Rearrangement of vinyl acetals under a variety of conditions resulted in cis- and trans-2,3-disubstituted tetrahydrofuran derivatives in a highly stereoselective manner. Rearrangements at lower temperatures typically provided the cis-2,3-disubstituted tetrahydrofuran carbaldehydes. At higher temperatures, the corresponding trans-2,3-disubstituted tetrahydrofuran carbaldehydes are formed. The requisite substrates for the vinyl acetal rearrangement were synthesized via ring-closing olefin metathesis of bis(allyoxy)methyl derivatives using Grubbs second-generation catalyst followed by olefin isomerization using a catalytic amount of RuCl2(PPh3)3. We examined the substrate scope using substituted aromatic and aliphatic derivatives. Additionally, the rearrangement was utilized in the synthesis of a stereochemically-defined bis-tetrahydrofuran (bis-THF) derivative, which is one of the key structural elements of darunavir, an FDA-approved drug for the treatment of HIV/AIDS.