Second Dimension Column Research Articles

Analysis of Softwood Lignans by Comprehensive Two-Dimensional Liquid Chromatography.

Lignans constitute a large group of phenolic plant secondary metabolites possessing high bioactivity. Their accurate determination in plant extracts with a complex chemical composition is challenging and requires advanced separation techniques. In the present study, a new approach to the determination of lignans in coniferous knotwood extracts as the promising industrial-scale source of such compounds based on comprehensive two-dimensional liquid chromatography separation and UV spectrophotometric detection is proposed. First and second-dimension column screening showed that the best results can be obtained using a combination of non-polar and polar hydroxy group embedded octadecyl stationary phases with moderate (~40%) "orthogonality". The optimization of LC × LC separation conditions allowed for the development of a new method for the quantification of the five lignans (secoisolariciresinol, matairesinol, pinoresinol, 7-hydroxymatairesinol, and nortrachelogenin) in knotwood extracts with limits of quantification in the range of 0.27-0.95 mg L-1 and a linear concentration range covering at least two orders of magnitude. Testing the developed method on coniferous (larch, fir, spruce, and pine) knotwood extracts demonstrated the high selectivity of the analysis and the advantages of LC × LC in the separation and accurate quantification of the compounds co-eluting in one-dimensional HPLC.

Evaluation of Cryogen-Free Thermal Modulation-Based Enantioselective Comprehensive Two-Dimensional Gas Chromatography for Stereo-Differentiation of Monoterpenes in Citrus spp. Leaf Oils.

This study evaluates the applicability of enantioselective gas chromatography (eGC) and enantioselective comprehensive two-dimensional gas chromatography (eGC×GC) coupled with flame ionization detection for the stereospecific analysis of designated chiral monoterpenes within essential oils distilled from the leaves of Citrus hystrix (CH), C. limon (CL), C. pyriformis (CP), and C. microcarpa (CM). A cryogen-free solid-state modulator with a combination of enantioselective first-dimension and polar second-dimension column arrangements was used to resolve potential interferences in Citrus spp. leaf oils that can complicate the accurate determination of enantiomeric compositions. Interestingly, considerable variations were observed for the enantiomeric fractions (EFs) of the chiral terpenes. (+)-limonene was identified as the predominant enantiomer (60.3-98.9%) in all Citrus oils, (+)-linalool was the major enantiomer in CM (95.9%), (-)-terpenin-4-ol was the major isomer in CM (66.4%) and CP (61.1%), (-)-α-pinene was the dominant antipode in CL (55.5%) and CM (92.1%). CH contained (-)-citronellal (100%) as the pure enantiomer, while CL and CP have lower proportions (9.0-34.6%), and citronellal is absent in CM. The obtained enantiomeric compositions were compared and discussed with results from eGC using the same enantioselective column. To our knowledge, this work encapsulates the first report that details the EFs of these chiral monoterpenes in Citrus spp. leaf oil.

A fast temperature-programmed second-dimension column for comprehensive two-dimensional gas chromatography.

The short analysis time and constant temperature environment in the second dimension of two-dimensional comprehensive chromatography frequently causes wraparound problems, especially for complex high boilers. This problem can be solved by temperature programming on the second column, but since this requires heating and cooling the column in a matter of seconds, it is difficult to implement. In this study, we describe a method of accomplishing rapid heating and cooling with a resistively heated column cooled by compressed air. Critical to this method is minimizing the lag time between the actual temperature and the reported temperature by using the column heating element as the temperature sensor, virtually eliminating the danger of overshooting the temperature setpoint. This technique facilitates a ramp rate of up to 100°C/s with minimal overshooting-well beyond the requirements of gas chromatography. A single-layer column bundle design allows a compressed-air cooling device to cool the column from 200 to 50°C at an average rate of -21°C/s. The secondary dimension temperature programming is facilitated by the longer secondary dimension time made possible by the direct flow modulation method. We evaluated the performance of the single-layer column bundle and demonstrated this method by applying it to a gasoline sample. We also compared this method with the traditional isothermal approach and found that use of the secondary temperature program reduced the naphthalene retention time from 12.1 to 6.3s and its peak width at half height from 846 to 126ms.

Theoretical and practical comparison of RPLC and RPLC × RPLC: how to consider dilution effects and sensitivity in addition to separation power?

The objective of this work was to provide an unbiased comparison of one-dimensional reversed-phase liquid chromatography (1D-RPLC) and comprehensive two-dimensional RPLC (RPLC × RPLC), through calculations and experimental verifications. For this purpose, various quality descriptors were evaluated, including peak capacity, analysis time, dilution factor, number of runs in the second dimension, and injection volume. The same strategy was applied to small pharmaceuticals and peptides. Whatever the analysis time between 30 and 200min, short columns of only 30 × 2.1mm packed with sub-2-µm particles should be selected in both dimensions of the 2D-LC setup to obtain the best compromise in terms of peak capacity and sensitivity. The peak capacity in RPLC × RPLC vs. RPLC was significantly improved for analysis times beyond 5min. However, extra-column volume located after the second-dimension column was found to be particularly critical for peptides, and up to 50% lower peak capacity was observed with MS vs. UV detection. Contrary to common belief, higher dilution is not always observed in RPLC × RPLC. With adequate analytical conditions, better sensitivity (in theory fivefold and in practice three- to fivefold) could be achieved in RPLC × RPLC compared to 1D-RPLC, regardless of the analysis time.

Speeding up temperature-responsive × reversed-phase comprehensive liquid chromatography through the combined exploitation of temperature and flow rate gradients

Comprehensive two-dimensional liquid chromatography (LC×LC) can provide enhanced resolving power and higher peak capacities for the separation of complex samples. The transfer of fractions of too high eluotropic strength from the first dimension, however, can lead to peak broadening. This process is related to the column dimensions, the flow rates, mobile phase compositions, and stationary phase compatibility. Temperature-responsive LC (TRLC) uses a smart polymer coupled to silica (poly(N-isopropylacrylamide), pNIPAAm), that exhibits a change in polarity upon modest variations in column temperature. Retention is thus modulated by temperature and not by organic solvents, allowing for the use of purely aqueous mobile phases. As these aqueous mobile phases depict a very low eluotropic strength on a reversed-phase column, it facilitates band refocusing at the second-dimension column head in TRLC×RPLC. One of the remaining obstacles of TRLC is the long analysis time. In this research, the potential of this column combination in terms of analyte refocusing will be exploited. First, it is shown that upwards flow gradients can be implemented in the first dimension of TRLC×RPLC. As the flow in the second dimension is maintained at a constant level, a first-dimension flow gradient does not lead to impaired sensitivity and has no negative effects on the resulting peak size. Then, the novel combination of a downwards temperature gradient with an upwards flow gradient will be introduced to speed up the analyses further. Analysis time was, depending on the method used, reduced by 36–54%, as demonstrated by the analysis of mixtures of food additives, phenolic compounds, and small molecule pharmaceuticals mimicking impurity analysis at a 0.05% level.

Evaluation of Gas Chromatography Columns with Radially Elongated Pillars as Second-Dimension Columns in Comprehensive Two-Dimensional Gas Chromatography.

The present study investigated the use of a dedicated gas chromatography (GC) column (L = 70 cm, 75 μm deep, and 6.195 mm wide) with radially elongated pillars (REPs) as the second column in a comprehensive two-dimensional gas chromatography (GC × μGC) system. Three stationary phases [apolar polydimethylsiloxane (PDMS), medium polar room-temperature ionic liquid (RTIL) based on monocationic phosphonium, and polar polyethylene glycol (PEG-1000)] have been coated using the static method at constant pressure or using an original vacuum pressure program (VPP) from 400 to 4 mbar. The best efficiency reached up to N = 62,000 theoretical plates for a film thickness of 47 nm at 100 °C for an iso-octane peak (k = 0.16) at an optimal flow rate of 4.8 mL/min. The use of the VPP improved the efficiency by approximately 15%. Efficiencies up to 28,000 and 47,000 were obtained for PEG-1000 and RTIL, respectively. A temperature-programmed separation of a mixture of 11 volatile compounds on a PDMS-coated chip was obtained in less than 36 s. The PDMS-, PEG-1000-, and RTIL-coated chips were tested as the second column using a microfluidic reverse fill/flush flow modulator in a GC × μGC system. The REP columns were highly compatible with the operating conditions in terms of flow rate and with more than 30,000 plates for the iso-octane peak. Moreover, a commercial solvent called white spirit containing alkanes and aromatic compounds was injected in three sets of columns in normal and reverse modes, demonstrating the great potential of the chip as a second-dimension separation column.

Principal component analysis of comprehensive three-dimensional gas chromatography time-of-flight mass spectrometry data

Comprehensive three-dimensional (3D) gas chromatography (GC3) coupled to time-of-flight-mass spectrometry (GC3-TOFMS) is an intriguing extension of the well-established comprehensive two-dimensional gas chromatography (GC×GC) technique. Although impressive gains have been made in the instrumentation realm, the utility of non-targeted chemometric analysis of GC3-TOFMS data has yet to be explored. Herein, we present the first application of principal component analysis (PCA) to a GC3-TOFMS dataset of jet fuel samples. Five replicates each of four jet fuels (JP8, J1800A, JP4, and JP7) were collected by GC3-TOFMS with commercial thermal modulation from the first-dimension column (1D) to the second-dimension column (2D), and dynamic pressure gradient modulation (DPGM) from the 2D column to the third-dimension column (3D), thus providing full mass transfer (100% duty cycle both modulation stages). A novel re-registration technique is introduced in which a user-selected series of vacant 3D modulations are removed to correct 2D shifting and effectively “center” the data. This shifting has consistently been observed in the 2D versus 1D view of GC3-TOFMS chromatograms, likely due to the slowed flow on 2D in DPGM and/or temperature programming effects. The 3D PCA loadings of the re-registered data revealed subtle chemical differences between the fuels which would not be as easily elucidated using PCA of GC×GC data. Finally, PCA of the two most chemically similar fuels (J1800A and JP7) revealed additional chemical differences which were drowned out in the initial multi-fuel PCA model, highlighting the potential advantage of “pairwise” PCA for multi-class GC3-TOFMS datasets.

Evaluation of different internal diameter coated modulation columns within the context of solid-state modulation.

The solid-state-modulator is a consumable-free thermal modulator, used within the context of comprehensive two-dimensional gas chromatography. Its consumable-free nature is guaranteed by the presence of a thermal-electric cooler device located between two heated chambers, everything located outside the gas chrpmatograph oven. The aim of the present research is to evaluate the solid-state-modulator modulation performance in relationship to different modulation capillary geometries. For this purpose, two coated modulation capillaries with the same length, but with different internal diameters (0.25 and 0.18mm) were used. The effects of gas linear velocity, modulator temperature, and modulation period were evaluated in several applications involving standard alkanes and a sample of diesel fuel. Fundamental gas chromatography parameters (peaks widths, resolution) were measured under the different experimental conditions. Detailed information is provided on gas flow optimization, with particular emphasis on the efficiency of chromatography band reinjection onto the second-dimension column. The results obtained from the present investigation highlight how the modulation capillary characteristics have a great impact on the overall comprehensive two-dimensional gas chromatography separation. Specifically, considering the results herein attained, the use of a 0.18mm ID × 0.18 μm df modulation column is advisable compared to a 0.25mm ID × 0.25 μm df one.

Comparison of Thermal and Flow-Based Modulation in Comprehensive Two-Dimensional Gas Chromatography—Time-of-Flight Mass Spectrometry (GC × GC-TOFMS) for the Analysis of Base Oils

Base oils are produced by refining crude oil or through chemical synthesis. They are a key component of engine oils. With an immense range of carbon numbers and boiling points, analyzing such complex mixtures is very difficult. The need to monitor industrial petroleum processing steps, as well as to identify petrochemical environmental pollutants, drives the search for improved characterization methods. Comprehensive two-dimensional gas chromatography (GC × GC) is one of the best tools for that. The modulator used in GC × GC is responsible for trapping/sampling the first dimension (1D) column analytes, then reinjecting them in the form of narrow bands onto the second dimension (2D) column for further separation. Modulators used today generally fall into two categories, thermal and flow ones. Heater-based thermal modulators trap the 1D column effluent at or above ambient temperatures. Flow-based modulators utilize storage loop(s) to collect the 1D effluent, which is subsequently flushed into the second-dimension column for further separation. A single-stage, consumable-free thermal modulator and a reverse fill/flush flow modulator were compared for the characterization of base oils. Both were evaluated on their ability to achieve separation of several conventional and synthetic engine oils components. A reverse column set, polar 1D and nonpolar 2D, allowed group-type analysis of all classes, including linear, branched, and aromatic species. The results show the ability to achieve a comprehensive separation of specific compound classes and the differentiation of engine oil types and manufacturers. Soft ionization assisted in tentative identification of two alkylated diphenylamines in each sample. The advantages and limitations of both thermal and flow modulation are presented.

Application of achiral-chiral two-dimensional HPLC for separation of phenylalanine and tryptophan enantiomers in dietary supplement.

This study developed a two-dimensional heart-cutting LC method for the separation of amino acid enantiomers. Two approaches for achiral separation of amino acids, phenylalanine and tryptophan, were selected. Amino acids were separated on C18 or hydrophilic interaction liquid chromatography (HILIC) columns in first dimension after their enantiomer separation on a teicoplanin chiral column in second dimension. Mobile phases for both separation systems were optimized by testing different types of organic modifiers, concentrations of ion-pair agent (sodium 1-octanesulfonate), and ionic modifier (ammonium acetate). The resolution of enantiomers higher than 1.5 for both amino acids was achieved using a C18-teicoplanin coupled column separation system with mobile phases methanol/2 mM sodium 1-octanesulfonate (10:90 and 75:25, step gradient between achiral and chiral columns, respectively). The lower resolution of amino acid enantiomers (RS ˃ 0.9), but higher column efficiency, was achieved on a HILIC-teicoplanin separation system with mobile phases acetonitrile/50 mM ammonium acetate (90:10 and 80:20, step gradient between achiral and chiral columns, respectively). The developed heart-cutting 2D-LC methods were validated in terms of linearity, limit of detection, limit of quantification, precision, and accuracy. The results suggested that the developed methods were applicable for the simultaneous determination of amino acid enantiomers in the dietary supplement. The sample contained l-phenylalanine and l-tryptophan.

Mass spectrometric investigation of cardiolipins and their oxidation products after two-dimensional heart-cut liquid chromatography

The anionic phospholipid class of cardiolipins (CL) is increasingly attracting scientific attention in the recent years. CL can be found as a functional component of mitochondrial membranes in almost all living organisms. Changes in the CL composition are favored by oxidative stress. Based on this finding, the investigation of CL and their oxidation products in relation to various disease patterns, including neurodegenerative ones, is moving into the focus of current research. The analysis of this diverse lipid class is still challenging and requires sensitive and selective methods. In this work, we demonstrate an online two-dimensional liquid chromatography (2D-LC) approach by means of a heart-cut setup. In the first dimension, a fast hydrophilic interaction liquid chromatography (HILIC) method was developed for the separation of CL and their oxidation products from other phospholipid classes, but more important from nonpolar lipid classes, such as triacylglycerol and cholesterol. Those classes can negatively affect the electrospray ionization and also the chromatography. For the heart-cut approach, the CL fraction was selectively transferred to a loop using a six-port valve followed by the transfer to a reversed phase (RP) column in second dimension. On the RP column, the transferred CL fraction including the oxidation products were separated according to the hydrophobicity of acyl chain moieties. Matrix effects were significantly reduced compared to the one-dimensional LC-MS method. In addition, the total separation time had not to be prolonged by shifting the equilibration step of the RP column parallel to the separation in first dimension. The heart-cut LC-LC approach was applied to artificially oxidized lipid extracts of bovine heart and yeast by means of Fenton reaction. In summary, 42 species have been identified by high resolution mass spectrometry and database matching. 31 species thereof have been further characterized by MS/MS experiments.

Two dimensional chromatography mass spectrometry: Quantitation of chiral shifts in metabolism of propranolol in bioanalysis

In this study a heart-cutting 2D-LC method was successfully developed and optimized in order to discriminate and quantitate (S)-propranolol, (R)-propranolol, and its hydroxy metabolites, namely the isomeric (S)-4′‑hydroxy propranolol, (R)-4′‑hydroxy propranolol, (S)-5′‑hydroxy propranolol, (R)-5′‑hydroxy propranolol, (S)-7′-hydroxy propranolol, and (R)-7′‑hydroxy propranolol in one chromatographic run. Thereby, experiments investigating chiral discrimination in ring hydroxylation of propranolol were made feasible.Analysis of human urine samples after administration of a single oral dose of 40 mg of propranolol clearly revealed considerable chiral shifts in propranolol and its 4′-, 5′-, and 7′-hydroxy metabolites. Furthermore, the excretion rates of the individual (S)- and (R)-enantiomers were continuously monitored over 24 h post administration.Studies were performed utilizing a 2D-LC system hyphenated to a triple quadrupole mass spectrometer. The chromatographic system was endued with a reversed phase column (phenyl-hexyl) in first dimension and a teicoplanin based chiral column in second dimension. The method was basically validated and successfully evaluated as robust. Calibration was performed achieving accuracy between 80% and 120%. Maximal excretion rates of (S)-propranolol, (R)-propranolol, (S)-4′‑hydroxy propranolol, (R)-4′‑hydroxy propranolol, (S)-5′‑hydroxy propranolol, (R)-5′‑hydroxy propranolol, and (R)-7′‑hydroxy propranolol were 237 ng/min, 281 ng/min, 4 ng/min, 4 ng/min, 1 ng/min, 9 ng/min, and 3 ng/min, respectively.

Stronger associations of oil-based sexual lubricants and hygiene products using GC×GC–MS

The profile of minor compounds in complex sexual lubricants was investigated by traditional one-dimensional gas chromatography-mass spectrometry (GC–MS) and comprehensive two-dimensional gas chromatography-mass spectrometry (GC×GC–MS). Although GC–MS is a powerful instrument, it has some limitations with truly complex mixtures that have many components that can co-elute. This is the primary advantage of GC×GC. By coupling a second-dimension column in series with the first-dimension column using a modulator, components that co-elute on the first column may be resolved on a second column with orthogonal selectivity. This study utilized a forward fill/reverse flush differential flow modulator run in both two-dimensional mode (GC×GC–MS) and single dimensional mode (GC–MS) in the same instrumental sequence. Pearson correlation coefficients were calculated for each intra-method pairwise comparison to determine which methodology provided an accurate measure of similarity or difference. The use of GC×GC–MS analysis can increase the differentiation of complex mixtures when GC chromatograms shows high similarity of two different samples. In this study, when GC chromatograms of two similar samples were compared they had low correlation scores. However, the comparison of the GC×GC chromatograms of the same samples had higher correlation scores shows high similarity based on the increased sensitivity and separation of co-eluting peaks by the two-dimensional GC×GC column configuration.

Online Comprehensive High pH Reversed Phase × Low pH Reversed Phase Approach for Two-Dimensional Separations of Intact Proteins in Top-Down Proteomics.

A proof-of-concept study is presented on the use of comprehensive two-dimensional liquid chromatography mass spectrometry (LC × LC-MS) for the separation of intact protein mixtures using a different mobile phase pH in each dimension. This system utilizes mass spectrometry (MS) friendly pH modifiers for the online coupling of high pH reversed phase liquid chromatography (HPH-RPLC) in the first dimension (1D) followed by low pH reversed phase liquid chromatography (LPH-RPLC) in the second dimension (2D). Owing to the ionic nature of proteins, the use of a different mobile phase pH was successful to provide altered selectivity between the two dimensions, even for closely related protein variants, such as bovine cytochrome c and equine cytochrome c, which differ by only three amino acids. Subminute gradient separation of proteins in the second dimension was successful to minimize analysis time, while maintaining high peak capacity. Unlike peptides, the elution order of studied proteins did not follow their isoelectric points, where acidic proteins would be expected to be more retained at low pH (and basic proteins at high pH). The steep elution isotherms (on-off retention mechanism) of proteins and the very steep gradients utilized in the second-dimension column succeeded in overcoming pH and organic solvent content mismatch. The utility of the system was demonstrated with a mixture of protein standards and an Escherichia coli protein mixture.

Development of Ultrafast Separations Using Negative Pulse Partial Modulation To Enable New Directions in Gas Chromatography.

Partial modulation via a pulse flow valve operated in the negative pulse mode is developed for high-speed one-dimensional gas chromatography (1D-GC), comprehensive two-dimensional (2D) gas chromatography (GC × GC), and comprehensive three-dimensional gas chromatography (GC3). The pulse flow valve readily provides very short modulation periods, PM, demonstrated herein at 100, 200, and 300 ms, and holds significant promise to increase the scope and applicability of GC instrumentation. The negative pulse mode creates an extremely narrow, local analyte concentration pulse. The reproducibility of the negative pulse mode is validated in a 1D-GC mode, where a pseudosteady-state analyte stream is modulated, and 8 analytes are baseline resolved (resolution, Rs ≥ 1.5) in a 200 ms window, providing a peak capacity, nc, of 14 at unit resolution ( Rs = 1.0). Additionally, the pulse width, pw, of the pulse flow valve "injection" relationship to peak width-at-base, wb, resolution between peaks and detection sensitivity are studied. To demonstrate the applicability to GC × GC, a high-speed separation of a 20-component test mixture of similar, volatile analytes is shown. Analytes were separated on the second-dimension column, 2D, with 2 wb ranging from 7 to 12 ms, providing an exceptional 2D peak capacity, 2 nc, of ∼12 using a modulation period ( PM) of 100 ms. Next, a 12 min separation of a diesel sample using a PM of 300 ms is presented. The 1 wb is ∼4 s, resulting in a 1 nc of ∼180, and 2 wb is ∼18 ms, resulting in a 2 nc of ∼17, thus achieving a nc,2D of ∼3000 in this rapid GC × GC diesel separation. Finally, GC3 with time-of-flight mass spectrometry (TOFMS) detection using a PM of 100 ms applied between the 2D and 3D columns is reported. Narrow third dimension, 3D, peaks with 3 wb of ∼15 ms were obtained, resulting in a GC3 peak capacity, nc,3D, of ∼35 000 in a 45 min separation.

Tunable Silver-Containing Stationary Phases for Multidimensional Gas Chromatography.

To achieve high separation power of complex samples using multidimensional gas chromatography (MDGC), the selectivity of the employed stationary phases is crucial. The nonpolar × polar column combination remains the most popular column set used in MDGC. However, resolution of mixtures containing light analytes possessing very similar properties remains a formidable challenge. The development of stationary phases that offer unique separation mechanisms have the potential to significantly improve MDGC separations, particularly in resolving coeluting peaks in complex samples. For the first time, a stationary phase containing silver(I) ions was successfully designed and employed as a second-dimension column using comprehensive two-dimensional gas chromatography (GC × GC) for the separation of mixtures containing alkynes, dienes, terpenes, esters, aldehydes, and ketones. Compared with a widely used nonpolar and polar column set, the silver-based column exhibited superior performance by providing better chromatographic resolution of coeluting compounds. A mixture of unsaturated fatty acids was successfully separated using a GC × GC method in which the elution order in the second dimension was highly dependent on the number of double bonds within the analytes.

Comprehensive two-dimensional monolithic liquid chromatography of polar compounds.

Two-dimensional liquid chromatography largely increases the number of separated compounds in a single run, theoretically up to the product of the peaks separated in each dimension on the columns with different selectivities. On-line coupling of a reversed-phase column with an aqueous normal-phase (hydrophilic interaction liquid chromatography) column yields orthogonal systems with high peak capacities. Fast on-line two-dimensional liquid chromatography needs a capillary or micro-bore column providing low-volume effluent fractions transferred to a short efficient second-dimension column for separation at a high mobile phase flow rate. We prepared polymethacrylate zwitterionic monolithic micro-columns in fused silica capillaries with structurally different dimethacrylate cross-linkers. The columns provide dual retention mechanism (hydrophilic interaction and reversed-phase). Setting the mobile phase composition allows adjusting the separation selectivity for various polar substance classes. Coupling on-line an organic polymer monolithic capillary column in the first dimension with a short silica-based monolithic column in the second dimension provides two-dimensional liquid chromatography systems with high peak capacities. The silica monolithic C18 columns provide higher separation efficiency than the particle-packed columns at the flow rates as high as 5mL/min used in the second dimension. Decreasing the diameter of the silica monolithic columns allows using a higher flow rate at the maximum operation pressure and lower fraction volumes transferred from the first, hydrophilic interaction dimension, into the second, reversed-phase mode, avoiding the mobile phase compatibility issues, improving the resolution, increasing the peak capacity, and the peak production rate.

Development and validation of a pneumatic model for the reversed-flow differential flow modulator for comprehensive two-dimensional gas chromatography

The development of the reversed fill/flush modulator represents a significant advancement in flow-modulated, comprehensive two-dimensional gas chromatography (GC × GC). Compared to the forward flush/fill modulator, the reversed-flow modulator is less susceptible to baseline anomalies and peak tailing as a result of modulator channel overfilling or insufficient purging of high concentration analytes. Flow reversal requires the addition of a bleed capillary not present in the forward-flow modulator. Selecting the appropriate restriction of the bleed capillary is critical. If the bleed capillary is too restrictive, eluate from the first-dimension column can split between the modulator channel and second-dimension column, which also results in baseline artifacts. To gain a better understanding of the reversed-flow modulator, a comprehensive pneumatic model was developed. The model was validated by comparing calculated and measured hold-up times. The errors in calculated hold-up times were less than 1% of the measured values. The model can be used to predict first-dimension eluate splitting and determine the optimal bleed capillary dimensions to prevent its occurrence. Calculation of the modulator hold-up time can be used to determine the maximum collection time to ensure comprehensive analysis and optimal flush times for partial fill operation.

Comprehensive two-dimensional liquid chromatography of heavy oil

Heavy oil refers to the part of crude oil that is not amenable to further distillation. Processing of these materials to useful products provides added value, but requires advanced technology as well as extensive characterization in order to optimize the yield of the most profitable products. The use of comprehensive two-dimensional liquid chromatography (LC × LC) was investigated for the characterization of de-asphalted short residue, also called maltenes. Initial studies were performed on a polycyclic aromatic hydrocarbon standard, an aromatic extract of hydrowax, and the fractions obtained after solvent fractionation of the maltenes. Cyanopropyl- and octadecyl-silica were used as first-dimension and second-dimension columns, respectively. The analysis of the maltenes and fractions thereof required a change in first-dimension stationary phase to biphenyl as well as an increase in modifier strength to improve recovery. The extensive characterization of maltenes with LC × LC within four hours was demonstrated.The Program for the Interpretive Optimization of Two-dimensional Resolution (PIOTR) has been applied to aid the method development, but due to the absence of specific peaks in the chromatograms it was challenging to apply to the maltenes or its fractions. Nonetheless, an approach is suggested for resolution optimization in cases such as the present one, in which regions of co-elution are observed, rather than clearly separated peaks.

Sequential Hybrid Three-Dimensional Gas Chromatography with Accurate Mass Spectrometry: A Novel Tool for High-Resolution Characterization of Multicomponent Samples

A novel sequential three-dimensional gas chromatography-high-resolution time-of-flight mass spectrometry (3D GC-accTOFMS) approach for profiling secondary metabolites in complex plant extracts is described. This integrated system incorporates a nonpolar first-dimension (1Dnp) separation step, prior to a microfluidic heart-cut (H/C) of a targeted region(s) to a cryogenic trapping device, directly followed by the rapid reinjection of a trapped solute into a polar second-dimension (2DPEG) column for multidimensional separation (GCnp-GCPEG). For additional separation, the effluent from 2DPEG can then be modulated according to a comprehensive 2D GC process (GC×GC), using an ionic liquid phase as a third-dimension (3DIL) column, to produce a sequential GCnp-GCPEG×GCIL separation. Thus, the unresolved or poorly resolved components, or regions that require further separation, can be precisely selected and rapidly transferred for additional separation on 2D or 3D columns, based on the greater separation realized by these steps. The described integrated system can be used in a number of modes, but one useful approach is to target specific classes of compounds for improved resolution. This is demonstrated through the separation and detection of the oxygenated sesquiterpenes in hop ( Humulus lupulus L.) essential oil and agarwood ( Aquilaria malaccensis) oleoresin. Improved resolution and peak capacity were illustrated through the progressive comparison of the tentatively identified components for GCnp-GCPEG and GCnp-GCPEG×GCIL methods. Relative standard deviations of intraday retentions (1 tR, 2 tR,, and 3 tR) and peak areas of ≤0.01, 0.07, 0.71, and 7.5% were achieved. This analytical approach comprising three GC column selectivities, hyphenated with high-resolution TOFMS detection, should be a valuable adjunct for the improved characterization of complex plant samples, particularly in the area of plant metabolomics.