Sea Surface Salinity Products Research Articles

Gap-filling techniques applied to the GOCI-derived daily sea surface salinity product for the Changjiang diluted water front in the East China Sea

Abstract. The spatial and temporal resolutions of contemporary microwave-based sea surface salinity (SSS) measurements are insufficient. Thus, we developed a gap-free gridded daily SSS product with higher spatial and temporal resolutions, which can provide information on short-term variability in the East China Sea (ECS), such as the front changes by Changjiang diluted water (CDW). Specifically, we conducted gap-filling for daily SSS products based on the Geostationary Ocean Color Imager (GOCI) with a spatial resolution of 1 km (0.01°), using a machine learning approach during the summer seasons from 2015 to 2019. The comparison of the Soil Moisture Active Passive (SMAP), Copernicus Marine Environment Monitoring Service (CMEMS), and Hybrid Coordinate Ocean Model (HYCOM) SSS products with the GOCI-derived SSS over the entire SSS range showed that the SMAP SSS was highly consistent, whereas the HYCOM SSS was the least consistent. In the < 31 psu range, the SMAP SSS was still the most consistent with the GOCI-derived SSS (R2=0.46; root mean squared error: RMSE = 2.41 psu); in the > 31 psu range, the CMEMS and HYCOM SSS products showed similar levels of agreement with that of the SMAP SSS. We trained and tested three machine learning models – the fine trees, boosted trees, and bagged trees models – using the daily GOCI-derived SSS as output, including the three SSS products, environmental variables, and geographical data. We combined the three SSS products to construct input datasets for machine learning. Using the test dataset, the bagged trees model showed the best results (mean R2=0.98 and RMSE = 1.31 psu), and the models that used the SMAP SSS as input had the highest level. For the dataset in the > 31 psu range, all the models exhibited similarly reasonable performances (RMSE = 1.25–1.35 psu). The comparison with in situ SSS data, time series analysis, and the spatial SSS distribution derived from models showed that all the models had proper CDW distributions with reasonable RMSE levels (0.91–1.56 psu). In addition, the CDW front derived from the model gap-free daily SSS product clearly demonstrated the daily oceanic mechanism during the summer season in the ECS at a detailed spatial scale. Notably, the CDW front in the zonal direction, as captured by the Ieodo Ocean Research Station (I-ORS), moved approximately 3.04 km d−1 in 2016, which is very fast compared with the cases in other years. Our model yielded a gap-free gridded daily SSS product with reasonable accuracy and enabled the successful recognition of daily SSS fronts at the 1 km level, which was previously not possible with ocean color data. Such successful application of machine learning models can further provide useful information on the long-term variation of daily SSS in the ECS. The gridded gap-free SSS dataset at 0.01°×0.01° spatial resolution is freely available at https://doi.org/10.22808/DATA-2023-2 (Shin et al., 2023).

Quality Evaluation of Satellite Sea Surface Salinity Products in the Pacific Ocean

Sea surface salinity (SSS) is one of the most important variables in ocean dynamics and atmospheric climate. The launch of three salinity satellites, Aquarius, SMAP and SMOS, has greatly expanded the global sea surface salinity data field. The latest ocean surface salinity (CCI+SSS) fusion project fully utilizes the satellite data from SMOS, supplemented by SMAP and Aquarius satellite data, to merge into the CCI fusion product. In this paper, the data accuracy of the four SSS products, Aquarius, SMAP, SMOS and CCI, is evaluated in terms of both average deviation and root mean square error (RMSE) by comparing with the in situ SSS monthly gridded EN4.2.2 dataset in the Pacific Ocean. The results show that compared with the in situ EN4.2.2 data, the average deviation and root mean square error of the four SSS products are relatively small in the Pacific subtropical region, while the errors are generally higher in the cold water and offshore regions. Overall, the CCI product has the smallest average deviation and RMSE in the Pacific Ocean, which is the best performance among the four products.

Salinity Inversion of Flat Sea Surface Based on Deep Neural Network

The distribution and change of sea surface salinity (SSS) have an important influence on the sea dynamic environment, marine ecological environment, global water cycle, and global climate change. Satellite remote sensing is the only practical way to continuously observe SSS over a wide area and for a long period of time. The salinity retrieval model of flat sea surface, which primarily includes empirical model and iterative model, is the key to retrieving satellite SSS products. The empirical models have high computational efficiency but low inversion accuracy, while the iterative models have high inversion accuracy but low computational efficiency. In order to reconcile the contradiction between the computational efficiency and inversion accuracy of existing models, this paper proposes a universal deep neural network (DNN) model architecture and corresponding training scheme, and provides 3 DNN models with extremely high computational efficiency and high inversion accuracy. The inversion error range, the root mean square error (RMSE), and the mean absolute error (MAE) of the DNN models on 311,121 sets of data have decreased by more than 40 times, 150 times, and 150 times, respectively, compared to the empirical model. The computational efficiency of the DNN models on 420,903 sets of data has improved by more than 100,000 times compared to the iterative model. Therefore, the algorithm developed in this paper can effectively solve the contradiction between the computational efficiency and inversion accuracy of existing models, and provide a theoretical support for high-precision and high-efficiency salinity inversion research.

An inversion method of subsurface thermohaline field based on deep learning and remote sensing data

ABSTRACT Seawater temperature and salinity are basic marine environmental parameters, which can be used to calculate other marine environmental parameters. However, most of the on-site observation data have the problems of uneven spatial distribution and time discontinuity, and it is difficult for remote sensing observation methods to obtain subsurface information. In this study, we proposed a deep learning model with combining remote sensing temperature and salinity as well as in-situ measured data by Argo profiles, and the nonlinear relationship was revealed. An effective and direct inversion method was realized for underwater three-dimensional thermohaline structure based on remote sensing temperature and salinity at accurate points on global scale. The SST data were obtained from the FY3C-VIRR daily sea surface temperature product, the SSS data were acquired from the SMAP Level 3 8-day running averages sea surface salinity product, and the Argo scatter data were got from the ‘Global Ocean Argo Scatter Data Set’. Based on the temporal and spatial location information of the data, this paper matched the remote sensing data from 2016 to 2019 with the Argo data, 64751 valid pairing points were obtained. The deep learning model was constructed as a multilayer perceptron model with 5 hidden layers. The RMSE of temperature had a maximum value of 2.106°C in 130 m depth and a minimum value of 0.367°C in 1000 m with an average of 1.174°C for validation dataset. And the RMSE of salinity had a maximum value of 0.356 psu in 0 m and a minimum value of 0.045 psu in 1000 m with an average of 0.202 psu. Compared with other methods based on fixed mesh products, this study realized a direct inversion method at any location in the global ocean and improved the inversion accuracy, which provides a reliable data support for refined marine monitoring.

Assimilation of sea surface salinities from SMOS in an Arctic coupled ocean and sea ice reanalysis

Abstract. In the Arctic, the sea surface salinity (SSS) plays a key role in processes related to water mixing and sea ice. However, the lack of salinity observations causes large uncertainties in Arctic Ocean forecasts and reanalysis. Recently the Soil Moisture and Ocean Salinity (SMOS) satellite mission was used by the Barcelona Expert Centre to develop an Arctic SSS product. In this study, we evaluate the impact of assimilating this data in a coupled ocean–ice data assimilation system. Using the deterministic ensemble Kalman filter from July to December 2016, two assimilation runs respectively assimilated two successive versions of the SMOS SSS product on top of a pre-existing reanalysis run. The runs were validated against independent in situ salinity profiles in the Arctic. The results show that the biases and the root-mean-squared differences (RMSD) of SSS are reduced by 10 % to 50 % depending on the area and highlight the importance of assimilating satellite salinity data. The time series of freshwater content (FWC) further shows that its seasonal cycle can be adjusted by assimilation of the SSS products, which is encouraging of the assimilation of SSS in a long-time reanalysis to better reproduce the Arctic water cycle.

Identification of Sea Surface Temperature and Sea Surface Salinity Fronts along the California Coast: Application Using Saildrone and Satellite Derived Products

Coastal upwelling regions are one of the most dynamic areas of the world’s oceans. The California and Baja California Coasts are impacted by both coastal upwelling and the California Current, leading to frontal activity that is captured by gradients in both Sea Surface Temperature (SST) and Sea Surface Salinity (SSS). Satellite data are a great source of spatial data to study fronts. However, biases near coastal areas and coarse resolutions can impair its usefulness in upwelling areas. In this work gradients in SST from NASA Multi-Scale Ultra-High Resolution (MUR) and in two SSS products derived from the Soil Moisture Active Passive (SMAP) NASA mission are compared directly with gradients derived from the Saildrone uncrewed vehicles to validate the gradients as well as to assess their ability to detect known frontal features. The three remotely sensed data sets (MURSST/JPL, SMAP SSS/RSS, SMAP SSS) were co-located with the Saildrone data prior to the calculation of the gradients. Wavelet analysis is used to determine how well the satellite derived SST and SSS products are reproducing the Saildrone derived gradients. Overall results indicate the remote sensing products are reproducing features of known areas of coastal upwelling. Differences between the SST and SSS gradients are mainly associated with the limitations of the microwave derived SSS coverage near land and its reduced spatial resolution. The results are promising for using remote sensing data sets to monitor frontal structure along the California Coast and the application to long term changes in coastal upwelling and dynamics.

Deviations of satellite-measured sea surface salinity caused by environmental factors and their regional dependence

Satellite measurements have largely improved sea surface salinity (SSS) observations in the recent decade, including Soil Moisture Ocean Salinity (SMOS), Aquarius/Satélite de Aplicaciones Científicas (SAC) D, and Soil Moisture Active-Passive (SMAP). This study evaluates the deviations between the satellite SSS products and the in-situ observations (ΔS) and analyses their relationships with the environmental factors, including sea surface temperature (SST), precipitation, and wind speed. The level 3 satellite SSS generally correlates well with Argo-observed SSS but differs in the middle and high latitudes and the tropical convergence zones. The smallest ΔS appears in the subtropical open oceans, where the sea surface features warm SST, rare precipitation, and low wind speed. The variations in mean |ΔS| for the three satellites show a robust dependence on SST, precipitation, and wind, with large ΔS (outside 5%–95% interval) in particular tending to occur in areas of cold SST, heavy rainfall, and high wind speeds. The most pronounced SSS deviations occur in the middle and high latitudes (beyond 40°) due to cold SST. In particular, heavy rainfall in the subpolar regions and strong westerly winds in the mid-latitudes also make the satellite SSS measurements less accurate. In the tropical convergence zones, large SSS deviations are mainly related to heavy rainfall, showing significant surface freshening. The fresh biases related to rainfall are more significant in Level 2 SSS than in Level 3, due to the short period of the convective rainfall. In addition, surface freshening is more obvious in low wind speed scenarios, showing that the fresh skin layer induced by rain is more common on the calm ocean surface.

Coastal Summer Freshening and Meltwater Input off West Greenland from Satellite Observations

Coastal waters off west Greenland are strongly influenced by the input of low salinity water from the Arctic and from meltwater from the Greenland Ice Sheet. Changes in freshwater content in the region can play an important role in stratification, circulation, and primary production; however, investigating salinity variability in the region is challenging because in situ observations are sparse. Here, we used satellite observations of sea surface salinity (SSS) from the Soil Moisture and Ocean Salinity mission produced by LOCEAN and by the Barcelona Expert Center (SMOS LOCEAN and SMOS BEC) and from the Soil Moisture Active Passive mission produced by the Jet Propulsion Laboratory (SMAP JPL) as well as by Remote Sensing Systems (SMAP RSS) to investigate how variability in a narrow coastal band off west Greenland is captured by these different products. Our analyses revealed that the various satellite SSS products capture the seasonal freshening off west Greenland from late spring to early fall. The magnitudes of the freshening and of coastal salinity gradients vary between the products however, being attenuated compared to historical in situ observations in most cases. The seasonal freshening off southwest Greenland is intensified in SMAP JPL and SMOS LOCEAN near the mouth of fjords characterized by large inputs of meltwater near the surface, which suggests an influence of meltwater from the Greenland Ice Sheet. Synoptic observations from 2012 following large ice sheet melting revealed good agreement with the spatial scale of freshening observed with in situ and SMOS LOCEAN data. Our analyses indicate that satellite SSS can capture the influence of meltwater input and associated freshwater plumes off coastal west Greenland, but those representations differ between products.

Comparative Analysis between Sea Surface Salinity Derived from SMOS Satellite Retrievals and in Situ Measurements

Validating Sea Surface Salinity (SSS) data has become a key component of the Soil Moisture Ocean Salinity (SMOS) satellite mission. In this study, the gridded SMOS SSS products are compared with in situ SSS data from analyzed products, a ship-based thermosalinograph and a tropical moored buoy array. The comparison was conducted at different spatial and temporal scales. A regional comparison in the Baltic Sea shows that SMOS slightly underestimates the mean SSS values. The influence of river discharge overrides the temperature in the Baltic Sea, bringing larger biases near river mouths in warm seasons. The global comparison with two Optimal Interpolated (OI) gridded in situ products shows consistent large-scale structures. Excluding regions with large SSS biases, the mean ΔSSS between monthly gridded SMOS data and OI in situ data is −0.01 PSU in most open sea areas between 60°S and 60°N, with a mean Root Mean Square Deviation (RMSD) of 0.2 PSU and a mean correlation coefficient of 0.50. An interannual tendency of mean ΔSSS shifting from negative to positive between satellite SSS and in situ SSS has been identified in tropical to mid-latitude seas, especially across the tropical eastern Pacific Ocean. A comparison with collocated buoy salinity shows that on weekly and interannual scales, the SMOS Level 3 (L3) product well captures the SSS variations at the locations of tropical moored buoy arrays and shows similar performance with in situ gridded products. Excluding suspicious buoys, the synergetic analysis of SMOS, SMAP and gridded in situ products is capable of identifying the erroneous data, implying that satellite SSS has the potential to act as a real-time 27 Quality Control (QC) for buoy data.

Estimating the Ocean Interior from Satellite Observations in the Kerguelen Area (Southern Ocean): A Combined Investigation Using High-Resolution CTD Data from Animal-Borne Instruments

Abstract Observational surface data are utilized to reconstruct the subsurface density and geostrophic velocity fields via the “interior + surface quasigeostrophic” (isQG) method in a subdomain of the Antarctic Circumpolar Current (ACC). The input variables include the satellite-derived sea surface height (SSH), satellite-derived sea surface temperature (SST), satellite-derived or Argo-based sea surface salinity (SSS), and a monthly estimate of the stratification. The density reconstruction is assessed against a newly released high-resolution in situ dataset that is collected by a southern elephant seal. The results show that the observed mesoscale structures are reasonably reconstructed. In the Argo-SSS-based experiment, pattern correlations between the reconstructed and observed density mostly exceed 0.8 in the upper 300 m. Uncertainties in the SSS products notably influence the isQG performance, and the Argo-SSS-based experiment yields better density reconstruction than the satellite-SSS-based one. Through the two-dimensional (2D) omega equation, we further employ the isQG reconstructions to diagnose the upper-ocean vertical velocities (denoted wisQG2D), which are then compared against the seal-data-based 2D diagnosis of wseal. Notable discrepancies are found between wisQG2D and wseal, primarily because the density reconstruction does not capture the seal-observed smaller-scale signals. Within several subtransects, the Argo-SSS-based wisQG2D reasonably reproduce the spatial structures of wseal, but present smaller magnitude. We also apply the isQG reconstructions to the 3D omega equation, and the 3D diagnosis of wisQG3D is very different from wisQG2D, indicating the limitations of the 2D diagnostic equation. With reduced uncertainties in satellite-derived products in the future, we expect the isQG framework to achieve better subsurface estimations.

Validating Salinity from SMAP and HYCOM Data with Saildrone Data during EUREC4A-OA/ATOMIC

The 2020 ‘Elucidating the role of clouds-circulation coupling in climate-Ocean-Atmosphere’ (EUREC4A-OA) and the ‘Atlantic Tradewind Ocean-Atmosphere Mesoscale Interaction Campaign’ (ATOMIC) campaigns focused on improving our understanding of the interaction between clouds, convection and circulation and their function in our changing climate. The campaign utilized many data collection technologies, some of which are relatively new. In this study, we used saildrone uncrewed surface vehicles, one of the newer cutting edge technologies available for marine data collection, to validate Level 2 and Level 3 Soil Moisture Active Passive (SMAP) satellite and Hybrid Coordinate Ocean Model (HYCOM) sea surface salinity (SSS) products in the Western Tropical Atlantic. The saildrones observed fine-scale salinity variability not present in the lower-spatial resolution satellite and model products. In regions that lacked significant small-scale salinity variability, the satellite and model salinities performed well. However, SMAP Remote Sensing Systems (RSS) 70 km generally outperformed its counterparts outside of areas with submesoscale SSS variation, whereas RSS 40 km performed better within freshening events such as a fresh tongue. HYCOM failed to detect the fresh tongue. These results will allow researchers to make informed decisions regarding the most ideal product and its drawbacks for their applications in this region and aid in the improvement of mesoscale and submesoscale SSS products, which can lead to the refinement of numerical weather prediction (NWP) and climate models.

First SMOS Sea Surface Salinity dedicated products over the Baltic Sea

Abstract. This paper presents the first Soil Moisture and Ocean Salinity (SMOS) Sea Surface Salinity (SSS) dedicated products over the Baltic Sea. The SSS retrieval from L-band brightness temperature (TB) measurements over this basin is really challenging due to important technical issues, such as the land–sea and ice–sea contamination, the high contamination by radio-frequency interference (RFI) sources, the low sensitivity of L-band TB at SSS changes in cold waters, and the poor characterization of dielectric constant models for the low SSS range in the basin. For these reasons, exploratory research in the algorithms used from the level 0 up to level 4 has been required to develop these dedicated products. This work has been performed in the framework of the European Space Agency regional initiative Baltic+ Salinity Dynamics. Two Baltic+ SSS products have been generated for the period 2011–2019 and are freely distributed: the Level 3 (L3) product (daily generated 9 d maps in a 0.25∘ grid; https://doi.org/10.20350/digitalCSIC/13859, González-Gambau et al., 2021a) and the Level 4 (L4) product (daily maps in a 0.05∘ grid; https://doi.org/10.20350/digitalCSIC/13860, González-Gambau et al., 2021b)​​​​​​​, which are computed by applying multifractal fusion to L3 SSS with SST maps. The accuracy of L3 SSS products is typically around 0.7–0.8 psu. The L4 product has an improved spatiotemporal resolution with respect to the L3 and the accuracy is typically around 0.4 psu. Regions with the highest errors and limited coverage are located in Arkona and Bornholm basins and Gulfs of Finland and Riga. The impact assessment of Baltic+ SSS products has shown that they can help in the understanding of salinity dynamics in the basin. They complement the temporally and spatially very sparse in situ measurements, covering data gaps in the region, and they can also be useful for the validation of numerical models, particularly in areas where in situ data are very sparse.

Global sea surface salinity via the synergistic use of SMAP satellite and HYCOM data based on machine learning

Sea surface salinity (SSS) provides information on the variability of ocean dynamics (global water cycle and ocean circulation) and air-sea interactions, thereby contributing to the identification and prediction of significant changes in the global climate. Monitoring global SSS via satellite observations has been possible using L-band microwave radiometers since 2010; however, their performance is limited by their retrieval algorithms under conditions such as radio frequency interference, low sea surface temperatures, and strong winds. This study proposes a new global SSS model using multi-source data based on seven machine learning approaches: K-nearest neighbor, support vector regression, artificial neural network, random forest, extreme gradient boosting, light gradient boosting model, and gradient boosted regression trees (GBRT). Five Soil Moisture Active Passive (SMAP) products, Hybrid Coordinate Ocean Model (HYCOM) SSS, and four ancillary data were used as input variables. All models produced better performance than either SMAP or HYCOM SSS products, with the top performing GBRT model reducing the root mean square difference for the validation dataset from 1.062 to 0.259 practical salinity units compared to the SMAP SSS product. The improved SSS products had increased correlation with the in-situ data for both low- and high-salinity waters across all global oceans, thus further advancing the understanding and monitoring of global SSS.

Data‐Driven Method With Numerical Model: A Combining Framework for Predicting Subtropical River Plumes

AbstractNumerical models are of fundamental usage for estuarine and coastal sciences. Although numerical simulations are widely applied, analyzing and improving them are often challenging tasks given their large volume and huge parameter space. In this study, a novel data‐driven framework is introduced to study the Minjiang River Plume (MJRP). The framework combines Self‐Organizing Map (SOM) clustering with a Hidden Markov Model (HMM). A three‐dimensional Regional Ocean Model System for MJRP is first configurated with realistic atmospheric, oceanic, and riverine forcings. By applying SOM clustering to the modeled sea surface salinity (SSS) with ∼2,000 2‐day averaged records from 2010 to 2020, we identify six major patterns of MJRP. Each pattern exhibits distinct circulation and plume structures. These MJRP patterns contain not only seasonal signals, but also rich short‐term variabilities driven by the riverine inputs and oceanic dynamics. Then, the SOM‐HMM method was applied to predict the future of the hidden state (i.e., patterns of MJRP) from the observable states (wind and river runoff). With a hypothetic SSS product from a geostationary satellite as the ground truth, we show that the SOM‐HMM method can predict MJRP patterns considerably high prediction accuracy and computational efficiency. Further, these patterns were translated back to SSS with high forecast skills. Combining a conventional numerical model with a data‐driven method, this approach can be promisingly applied in the short‐term marine forecast to support the utilization and management of other estuaries.

Improved BEC SMOS Arctic Sea Surface Salinity product v3.1

Abstract. Measuring salinity from space is challenging since the sensitivity of the brightness temperature (TB) to sea surface salinity (SSS) is low (about 0.5 K psu−1), while the SSS range in the open ocean is narrow (about 5 psu, if river discharge areas are not considered). This translates into a high accuracy requirement of the radiometer (about 2–3 K). Moreover, the sensitivity of the TB to SSS at cold waters is even lower (0.3 K psu−1), making the retrieval of the SSS in the cold waters even more challenging. Due to this limitation, the ESA launched a specific initiative in 2019, the Arctic+Salinity project (AO/1-9158/18/I-BG), to produce an enhanced Arctic SSS product with better quality and resolution than the available products. This paper presents the methodologies used to produce the new enhanced Arctic SMOS SSS product (Martínez et al., 2019) . The product consists of 9 d averaged maps in an EASE 2.0 grid of 25 km. The product is freely distributed from the Barcelona Expert Center (BEC, http://bec.icm.csic.es/, last access: 25 January 2022) with the DOI number https://doi.org/10.20350/digitalCSIC/12620 (Martínez et al., 2019). The major change in this new product is its improvement of the effective spatial resolution that permits better monitoring of the mesoscale structures (larger than 50 km), which benefits the river discharge monitoring.

Evaluation of SMOS L4 Sea Surface Salinity Product in the Western Iberian Coast

Salinity is one of the oldest parameters being measured in oceanography and one of the most important to study in the context of climate change. However, its quantification by satellite remote sensing has been a relatively recent achievement. Currently, after over ten years of data gathering, there are still many challenges in quantifying salinity from space, especially when it is intended for coastal environments study. That is mainly due to the spatial resolution of the available products. Recently, a new higher resolution (5 km) L4 SMOS sea surface salinity (SSS) product was developed by the Barcelona Expert Center (BEC). In this study, the quality of this product was tested along the Western Iberian Coast through its comparison with in situ observations and modelled salinity estimates (CMEMS IBI Ocean Reanalysis system). Moreover, several parameters such as the temperature and depth of in situ measurements were tested to identify the variables or processes that induced higher errors in the product or influenced its performance. Lastly, a seasonal and interannual analysis was conducted considering data between 2011 to 2019 to test the product as a potential tool for long-term studies. The results obtained in the present analysis showed a high potential of using the L4 BEC SSS SMOS product in extended temporal and spatial analyses along the Portuguese coast. A good correlation between the satellite and the in situ datasets was observed, and the satellite dataset showed lower errors in retrieving coastal salinities than the oceanic model. Overall, the distance to the coast and the closest rivers were the factors that most influenced the quality of the product. The present analysis showed that great progress has been made in deriving coastal salinity over the years and that the SMOS SSS product is a valuable contribution to worldwide climatological studies. In addition, these results reinforce the need to continue developing satellite remote sensing products as a global and cost-effective methodology for long-term studies.

Error Characterization of Satellite SSS Products Based on Extended Collocation Analysis

Triple collocation analysis is an effective method for assessing the error of observation systems with independent random error. However, this error independence is often violated, and systems show clear error correlations. Whereas many efforts have been devoted, the cause and determination of this error correlation are still challenging. In this work, we reveal that the error correlation is actually a signal observed by some systems, and taking this signal as the error correlation between systems will bias the error estimation results. Therefore, we define it as the representativeness signal instead of the representativeness error. Based on the multiscale signal approach and extended collocation analysis, we discuss the cause of this representativeness signal and its effect on sea surface salinity (SSS) data validation by synthesized experiments, satellite, buoy, and climatology products. The results suggest that the representativeness signal may vary with the different behaviors of observed variables. For SSS, the representativeness signal lies in satellite data with medium resolutions and similar representativeness. However, the <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">in situ</i> and climatology data, which have different resolutions compared with satellites, do not show apparent representativeness signals with satellite data. The data collocation procedure also affects the representativeness signal, which decreases with increasing collocation intervals. The extended collocation analysis can estimate the error of SSS products in most cases but may not provide robust estimation when the collocation data pairs are limited.

Using Saildrones to Assess the SMAP Sea Surface Salinity Retrieval in the Coastal Regions

Remote sensing of sea surface salinity (SSS) near land is difficult due to land contamination. In this study, we assess SSS retrieved from the Soil Moisture Active Passive (SMAP) mission in coastal region. SMAP SSS products from the Jet Propulsion Laboratory (JPL), and from the Remote Sensing Systems (RSS) are collocated with in situ data collected by saildrones during the North American West Coast Survey. Satellite and saildrone salinity measurements reveal consistent large-scale features: the fresh water (low SSS) assocciated with the Columbia River discharge, and the relatively salty water (high SSS) near Baja California associated with regional upwelling. The standard deviation of the difference (stdD) for collocations with SMAP Level 3 (8 days average) between 40 and 100km from land is 0.51 (0.56) psu for JPL V5 (RSS V4 70km). This is encouraging for the potential application of SMAP SSS in monitoring coastal zone freshwater particularly where there exists large freshwater variance. We analyze the different land correction approaches independently developed at JPL and RSS using SMAP Level 2 matchups. We found that JPL&#x0027;s land correction method is more promising in pushing SMAP SSS retrieval towards land. For future improvement, we suggest implementing dynamic land correction versus the current climatology based static land correction to reduce uncertainty in estimating land contribution. In Level 2 to Level 3 processing, a more rigorous quality control may help to eliminate outliers and deliver reliable Level 3 products without over-smoothing, which is important in resolving coastal processes such as fronts or upwelling.

Enhanced Sea Surface Salinity Estimates Using Machine-Learning Algorithm With SMAP and High-Resolution Buoy Data

Despite the recent advances in satellite-based L-band microwave radiometry and retrieval algorithms to provide a unique capability to measure sea surface salinity (SSS) from space and explore its utility for understanding mesoscale dynamics, global ocean circulation, vertical mixing, evaporation rates and climate oscillations, SSS retrieval from L-band microwave radiometric data from the NASA-SMAP (Soil Moisture Active Passive) mission is often biased with systematic errors on larger temporal, spatial scales and random errors on short-time and length scales. To improve the SSS retrieval from SMAP data, we developed a robust algorithm based on a machine-learning approach with high-resolution in-situ data from the Ocean Moored Buoy Network in the Northern Indian Ocean (OMNI), which includes the Arabian Sea (AS) and Bay of Bengal (BoB)). The new algorithm was rigorously trained, tested and validated using the in-situ SSS time series measurements from the AS and BoB. Several sensitive variables were examined and used to improve the SSS estimates &#x2013; such as radiometric and ancillary data from the satellite observations, sea-surface wind and precipitation from the ERA5 data, and SSS/ SST from the OMNI buoy measurements. The OMNI time-series measurements provided the spatially averaged satellite products to characterize the variability and gross features of SSS in BoB and AS waters on weekly, monthly, seasonal and annual time scales. The systematic validation of SMAP SSS products on a range of spatio-temporal scales showed that the new algorithm improved the SSS estimates by more than 15% in open ocean waters and 25% in river-discharge and precipitation-dominated regions in BoB and AS, when compared to the standard (operational) algorithm. Further analysis demonstrated that the new algorithm reduced clear biases and significant anomalies in SMAP SSS retrievals in the regions of river runoff, surface-freshened ocean and intense tropical cyclones, and captured synoptic/mesoscale SSS features and their seasonal variations in the North Indian Ocean.

The Salinity Pilot-Mission Exploitation Platform (Pi-MEP): A Hub for Validation and Exploitation of Satellite Sea Surface Salinity Data

The Pilot-Mission Exploitation Platform (Pi-MEP) for salinity is an ESA initiative originally meant to support and widen the uptake of Soil Moisture and Ocean Salinity (SMOS) mission data over the ocean. Starting in 2017, the project aims at setting up a computational web-based platform focusing on satellite sea surface salinity data, supporting studies on enhanced validation and scientific process over the ocean. It has been designed in close collaboration with a dedicated science advisory group in order to achieve three main objectives: gathering all the data required to exploit satellite sea surface salinity data, systematically producing a wide range of metrics for comparing and monitoring sea surface salinity products’ quality, and providing user-friendly tools to explore, visualize and exploit both the collected products and the results of the automated analyses. The Salinity Pi-MEP is becoming a reference hub for the validation of satellite sea surface salinity missions by providing valuable information on satellite products (SMOS, Aquarius, SMAP), an extensive in situ database (e.g., Argo, thermosalinographs, moorings, drifters) and additional thematic datasets (precipitation, evaporation, currents, sea level anomalies, sea surface temperature, etc.). Co-localized databases between satellite products and in situ datasets are systematically generated together with validation analysis reports for 30 predefined regions. The data and reports are made fully accessible through the web interface of the platform. The datasets, validation metrics and tools (automatic, user-driven) of the platform are described in detail in this paper. Several dedicated scienctific case studies involving satellite SSS data are also systematically monitored by the platform, including major river plumes, mesoscale signatures in boundary currents, high latitudes, semi-enclosed seas, and the high-precipitation region of the eastern tropical Pacific. Since 2019, a partnership in the Salinity Pi-MEP project has been agreed between ESA and NASA to enlarge focus to encompass the entire set of satellite salinity sensors. The two agencies are now working together to widen the platform features on several technical aspects, such as triple-collocation software implementation, additional match-up collocation criteria and sustained exploitation of data from the SPURS campaigns.