Screw Internal Fixation Research Articles

Long-term efficacy of oblique lateral interbody fusion combined with vertebral screw fixation for the treatment of lumbar specific infection

To explore medium and long term efficacy of oblique lateral interbody fusion (OLIF) in treating lumbar specific infection. From October 2017 to January 2021, 24 patients with lumbar specific infection were treated by OLIF combined with vertebral screw internal fixation, including 15 males and 9 females, aged from 27 to 61 years old with an average of (43.0±15.0) years old;the courses of disease ranged from 6 to 24 months with an average of (14.0±7.0) months;7 patients with L2-L3, 12 patients with L3-L4 and 5 patients with L4-L5;19 patients with tuberculosis infection and 5 patients with brucella infection. The amount of intraoperative blood loss, operative time and complications were recorded, and erythrocyte sedimentation rate(ESR), C-reactive protein (CRP), visual analogue scale (VAS), Japanese Orthopaedic Association(JOA) score and American Spinal Injury Association (ASIA) rating were compared before and one month after opertaion. All patients were followed up from 9 to 24 months with an average of (13.0±6.0) months. Operative time was (132.5±21.4) min, and intraoperative blood loss was (227.3±43.1) ml. ESR and CRP were decreased from (82.34±18.62) mmol·h-1 and (53.08±21.84) mg·L-1 before operation to (33.52±17.31) mmol·h-1 and (15.48±8.36) mg·L-1 at one month after operation, respectively (P<0.05). VAS was decreased from (7.52±1.36) before opertaion to (1.74±0.87) at one month after operation (P<0.05). JOA was increased from (17.86±3.95) before operation to (24.72±3.19) at one month after operation (P<0.05). Four patients had neurological symptoms before operation, and were classified to grade D according to ASIA classification, who were recovered to grade E at 1 month after operation. One patient was suffered from psoas major muscle injury after operation, and returned to normal at 3 weeks. One patient was suffered from abdominal distension and difficulty in defecation, and relieved after gastrointestinal decompression and enema. No complications such as abdominal organ injury and poor wound healing occurred in all patients. OLIF combined with vertebral screw internal fixation is a new minimally invasive surgical method for the treatment of lumbar specific infection, especially the lesion located on the middle lumbar vertebra. It has advantages of less trauma, short operation time, less blood loss, convenient operation, complete removal of the lesion, safety and effectiveness, and has good medium-and long-term efficacy for lumbar specific infection.

Optimizing Outcomes in Distal Tibial Deformity Correction: The Role of Supramalleolar Osteotomy with Computer-assisted Hexapod External Fixator.

Distal tibial deformities can significantly impact patients if left uncorrected, often leading to pain, alterations in gait, and the eventual development of post-traumatic arthritis. The criteria for surgical correction in these patients continues to be a subject of debate, while supramalleolar osteotomy (SMO) is an effective method for correcting distal tibial deformities. The purpose of this study was to evaluate and compare the clinical results of SMO using internal fixation or using computer-assisted hexapod external fixator in the treatment of distal tibial deformity. A retrospective study was conducted on 290 patients who underwent SMO between June 2015 and January 2023. Forty-four patients met the inclusion and exclusion criteria. Among the participants, 19 underwent SMO combined with a computer-assisted hexapod external fixator, while 25 received SMO with plate and screw internal fixation. The tibial anterior surface (TAS) angle, tibial lateral surface (TLS) angle, the tibiotalar (TT) angle and the talocrural (TC) angle were assessed on weight-bearing X-ray films. Functional assessments were performed according to the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score. The study followed patients for an average duration of 31.7 ± 15.3 months, with a range from 12 to 67 months. Successful bone union was achieved in all cases. For patients treated with the computer-assisted hexapod external fixator, significant improvements were observed: the mean deviation in sagittal plane deformity parameters decreased from 14.3 ± 10.4 degrees preoperatively to 2.8 ± 3.8 degrees postoperatively (p < 0.05). Similarly, coronal plane deformity parameters showed a reduction from 25.9 ± 22.5 degrees preoperatively to 5.9 ± 11.0 degrees postoperatively (p < 0.05). The AOFAS ankle-hindfoot score improved markedly from 66.0 ± 14.9 to 86.1 ± 11.7 points (p < 0.05). For patients undergoing internal fixation, the absolute difference in coronal plane parameters improved from 15.4 ± 12.6 degrees preoperatively to 3.7 ± 3.4 degrees postoperatively (p < 0.05). A significant enhancement in AOFAS ankle-hindfoot score was also noted, increasing from 68.3 ± 14.3 points to 79.4 ± 13.5 points (p < 0.05). There were no significant differences in gender, side, follow-up time, postoperative deviation of deformity, pre- or postoperative AOFAS between the two groups. In conclusion, comprehensive preoperative planning of SMO combined with either internal fixation or a hexapod external fixator for treating distal tibial deformities can achieve satisfactory outcomes. The utilization of a computer-assisted hexapod external fixator facilitates a gradual and precise correction process, which proved to be an effective and relatively safe method.

Arthroscopic reduction and hollow screw internal fixation for Eyres Type IIIA scapular coracoid fracture: a case report

BackgroundA coracoid process fracture combined with an acromioclavicular (AC) joint dislocation is an uncommon injury that typically causes significant pain and limits shoulder movement. Open reduction and internal fixation have been the traditional treatment approach. However, arthroscopic techniques are emerging as a promising alternative for managing these injuries.Case representationA 35-year-old woman presented with right shoulder pain following an accidental fall. Imaging studies revealed a coracoid process fracture along with an AC joint dislocation. The fracture was classified as an Eyres Type IIIA, which warranted surgical intervention. Our team performed arthroscopic coracoid fracture reduction and internal fixation surgery, as well as AC joint dislocation repair using Kirschner wires. Six months after surgery, the patient demonstrated a satisfactory functional outcome with complete bone healing.ConclusionThis case report highlights the potential of arthroscopic reduction and fixation as a novel treatment option for fractures of the coracoid base.

Application of polyetheretherketone rod semi-rigid pedicle screw internal fixation in lumbar non-fusion surgery

To investigate the effect of Polyetheretherketone (PEEK) rod semi-rigid pedicle screw fixation system in lumbar spine non-fusion surgery. A total of 74 patients with tow-level lumbar degenerative diseases who underwent surgery from March 2017 to December 2019 were divided into PEEK rod group and titanium rod group. In the PEEK rod group, there were 34 patients, including 13 males and 21 females, aged from 51 to 79 years old with an average of (62.4±6.8) years old;There were 1 patient of L1-L3 segments, 7 patients of L2-L4 segments, 20 patients of L3-L5 segments and 6 patients of L4-S1 segments. In the titanium rod group, there were 40 patients, including 17 males and 23 females, aged from 52 to 81 years old with an average of (65.2±7.3) years old;There were 3 patient of L1-L3 segments, 11 patients of L2-L4 segments, 19 patients of L3-L5 segments and 7 patients of L4-S1 segments. The general conditions of operation, such as operation time, intraoperative blood loss, postoperative drainage was recorded. The visual analogue scale (VAS) for low back pain and Oswestry disability index (ODI) were compared in preoperatively and postoperatively(3 months, 12 months and last follow-up) between two groups. The change of range of motion (ROM) was observed by flexion and extension x-ray of lumbar. All patients successfully completed the operation. The follow-up time ranged from 22 to 34 months with an average of(26.8±5.6) months. The operative time (142.2±44.7) min and intraoperative blood loss(166.5±67.4)ml in PEEK group were lower than those in titanium group [(160.7±57.3) min、(212.8±85.4) ml](P<0.05). There was no significant differences in postoperative drainage between the two groups (P>0.05). At the final follow-up visit, in PEEK group and titanium group VAS of low back pain[(0.8±0.4) points vs (1.0±0.5) points], VAS for leg pain [ (0.7±0.4) points vs (0.8±0.5) points] and ODI [(9.8±1.6)% vs (12.1±1.5)%] were compared with preoperative [ (5.8±1.1) points vs (6.0±1.1)points], [ (7.2±1.7) points vs (7.0±1.6) points], [(68.5±8.9)% vs(66.3±8.2)%] were significantly different(P<0.05). There was no significant difference in VAS scores between the two groups at each postoperative time point (P>0.05). At 3 months after surgery, there was no difference in ODI between the two groups (P>0.05). There were significant differences in ODI between PEEK group and titanium rod group at 12 months [(15.5±2.1)% vs (18.4±2.4)%] and at the last follow-up [(9.8±1.6)% vs (12.1±1.5)%] (P<0.05). The total range of motion (ROM) of lumbar decreased in both groups after surgery. At 12 months after surgery and the last follow-up, the PEEK group compared with the titanium rod group, the total range of motion of lumbar was statistically significant (P<0.05). The range of motion (ROM) of the fixed segments decreased in both groups after surgery. The ROM of the fixed segments in PEEK group decreased from (9.5±4.6)° to (4.1±1.9)° at the last follow-up (P<0.05), which in the titanium rod group was decreased from (9.8±4.3)°to (0.9±0.5)° at the last follow-up (P<0.05). The range of motion (ROM) of upper adjacent segment increased in both groups, there was statistical significance in the ROM of upper adjacent segment between the two groups at 12 months after surgery and the last follow-up, (P<0.05). There was no screw loosening and broken rods in both groups during the follow-up period. The PEEK rod semi-rigid pedicle screw internal fixation system used in lumbar non-fusion surgery can retain part of the mobility of the fixed segment, showing comparable short-term clinical efficacy to titanium rod fusion. PEEK rod semi-rigid pedicle screw internal fixation system is a feasible choice for the treatment of lumbar spine degenerative diseases, and its long-term efficacy needs further follow-up observation.

Micro-Computed Tomography Analysis and Histological Observation of the Screw-Bone Interface of Novel Porous Scaffold Core Pedicle Screws and Hollow Lateral Hole Pedicle Screws: A Comparative Study in Bama Pigs

Screw loosening is a common complication of pedicle screw internal fixation surgery. This study aimed to investigate whether the application of a porous scaffold structure can increase the contact area between screws and bone tissue by comparing the bone ingrowth and screw-bone interface of porous scaffold core pedicle screws (PSCPSs) and hollow lateral hole pedicle screws (HLHPSs) in the lumbar spine of Bama pigs. Sixteen pedicle screws of both types were implanted into the bilateral pedicles of the L1-4 vertebrae of 2 Bama pigs. All Bama pigs were sacrificed and the lumbar spine was freed into individual vertebrae at 16weeks postoperatively. After the vertebrae were made into screw-centered specimens, micro-computed tomography analysis and histological observation were performed to assess the screw-bone interface and bone growth around and within the screws. We found that the bone condition around PSCPSs and HLHPSs did not show significant differences on micro-computed tomography three-dimensional reconstruction images. CT transverse views showed different bone growth inside the 2 screws. In PSCPSs, bone tissue was seen to fill the internal pores and was evenly distributed around each strut. Inside HLHPSs, bone growth was confined to 1 side of the screw and did not fill the entire cavity. Osteometric analysis showed that bone volume fraction and trabecular number, the parameters representing bone mass, were higher in PSCPSs than in HLHPSs. These differences were not statistically significant (P > 0.05). Histological observations visualized that the osseointegration within PSCPSs was superior to that of HLHPSs, and the tight integration of bone tissue with the porous scaffold resulted in a larger screw-bone integration area in PSCPSs than in HLHPSs. Compared with HLHPSs, PSCPSs possessing a porous scaffold core could promote bone ingrowth and osseointegration, resulting in an effective enhancement of the combined area of the screw-bone interface.

Enhanced Degradability of Thiol-Ene Composites through the Inclusion of Isosorbide-Based Polycarbonates.

Open reduction internal fixation metal plates and screws remain the established standard-of-care for complex fracture fixation. They, however, have drawbacks such as limited customization, soft-tissue adhesions, and a lack of degradation. Bone cements and composites are being developed as alternative fixation techniques in order to overcome these issues. One such composite is a strong, stiff, and shapeable hydroxyapatite-containing material consisting of 1,3,5-triazine-2,4,6-trione (TATO) monomers, which cures through high energy visible light-induced thiol-ene coupling (TEC) chemistry. Previous human cadaver and in vivo studies have shown that patches of this composite provide sufficient fixation for healing bone fractures; however, the composite lacks degradability. To promote degradation through hydrolysis, new allyl-functionalized isosorbide-based polycarbonates have been added into the composite formulation, and their impact has been evaluated. Three polycarbonates with allyl functionalities, located at the termini (aPC1 and aPC2) or in the backbone (aPC3), were synthesized. Composites containing 1, 3, and 5 wt % of aPCs 1-3 were formulated and evaluated with regard to mechanical properties, water absorption, hydrolytic degradation, and cytotoxicity. Allyl-functionalized polycaprolactone (aPCL) was synthesized and used as a comparison. When integrated into the composite, aPC3 significantly impacted the material's properties, with the 5 wt % aPC3 formulation showing a significant increase in degradation of 469%, relative to the formulation not containing any aPCs after 8 weeks' immersion in PBS, along with a modest decrease in modulus of 28% to 4.01 (0.3) GPa. Osteosyntheses combining the aPC3 3 and 5 wt % formulations with screws on synthetic bones with ostectomies matched or outperformed the ones made with the previously studied neat composite with regard to bending stiffness and strength in four-point monotonic bending before and after immersion in PBS. The favorable mechanical properties, increased degradation, and nontoxic characteristics of the materials present aPC3 as a promising additive for the TATO composite formulations. This combination resulted in stiff composites with long-term degradation that are suitable for bone fracture repair.

Oblique Lumbar Interbody Fusion Combined with Posterior Percutaneous Pedicle Screw Internal Fixation: Does Variability in Cage Position Influence Clinical Outcomes?

The study investigates how cage positions in oblique lumbar interbody fusion (OLIF) combined with posterior percutaneous pedicle screw internal fixation (PPSF) affect lumbar canal and foraminal decompression and postoperative outcomes, providing guidance for optimal placement and efficacy assessment. This investigation assesses radiologic outcomes and follow-up data in relation to cage position variability among 80 patients who underwent L4/5 single-segment OLIF+PPSF from 2018 to2022. In the study involving 80 participants, the combination of OLIF and PPSF significantly improved lower back and leg symptoms in patients, leading to positive clinical outcomes during follow-up. The intervertebral disk height increased from an average of 8.10±2.79mm before surgery to 11.75±2.14mm after surgery (P<0.001). Additionally, this surgical technique notably increased the FH (P<0.001) and expanded the DCSA from 68.81±53.89mmˆ2 before surgery to 102.91±60.46mmˆ2 after surgery (P<0.001). Linear results suggest that changes in the position of the cage do not affect spinal imaging parameters. There is no significant difference in the correction of spinal parameters or prognosis whether the cage is back, middle, ahead. In the OLIF+PPSF procedure, strict requirements for cage position are not necessary to achieve predetermined spinal biomechanical parameters. The practice of repeated fluoroscopy to adjust cage position postimplantation does not provide added clinical benefits to the patient.

Clinical Effectiveness of the Plate Screw Internal Fixation Technique in the Treatment of Patients with Traumatic Fractures of Long Bones in the Lower Extremities

Clinical Effectiveness of the Plate Screw Internal Fixation Technique in the Treatment of Patients with Traumatic Fractures of Long Bones in the Lower Extremities

A clinical study of HoloSight Orthopaedic Trauma Surgery Robot-assisted infra-acetabular screw placement for acetabular fractures

To investigate the effectiveness of HoloSight Orthopaedic Trauma Surgery Robot-assisted infra-acetabular screw placement for treatment of acetabular fractures. The clinical data of 23 patients with acetabular fractures treated with open reduction and internal fixation and infra-acetabular screw placement in two medical centers between June 2022 and October 2023 were retrospectively analyzed. According to the the method of infra-acetabular screw placement, the patients were divided into navigation group (10 cases, using HoloSight Orthopaedic Trauma Surgery Robot-assisted screw placement) and freehand group (13 cases, using traditional X-ray fluoroscopy to guide screw placement). There was no significant difference in gender, age, body mass index, cause of injury, time from injury to operation, and Judet-Letournel classification between the two groups ( P>0.05). The time of infra-acetabular screw placement, the fluoroscopy frequency, the guide pin adjustment times, the quality of screw placement, the quality of fracture reduction, and the function of hip joint were compared between the two groups. All patients completed the operation successfully. The time of screw placement, the fluoroscopy frequency, and guide pin adjustment times in the navigation group were significantly less than those in the freehand group ( P<0.05). The quality of screw placement in the navigation group was significantly better than that in the freehand group ( P<0.05). Patients in both groups were followed up 6-11 months, with an average of 7.7 months. There were 9 and 9 cases in the navigation group and the freehand group who achieved excellent and good fracture reduction quality at 1 week after operation, and 12 and 12 cases with excellent and good hip joint function at last follow-up, respectively, and there was no significant difference between the two groups ( P>0.05). The fractures in both groups healed well, and there was no significant difference in healing time ( P>0.05). During the follow-up, there was no complication related to screw placement, such as failure of internal fixation, vascular and nerve injury, incisional hernia. In the treatment of acetabular fractures, compared with the traditional freehand screw placement, the HoloSight Orthopaedic Trauma Surgery Robot-assisted screw placement can reduce the time of screw placement, improve the accuracy of screw placement, and reduce the amount of radiation, which is an efficient, accurate, and safe surgical method.

Optimal screw orientation for fixation of coronal shear fractures: a biomechanical comparison

Coronal shear fractures of the capitellum are rare injuries which can be challenging to treat. The aim of this study was to compare the biomechanical properties of different internal screw fixation techniques for Dubberley type IA fractures of the capitellum. In this biomechanical study, Dubberley type IA fractures of the capitellum were created in 30 human fresh-frozen humeri. The specimens were then divided into 3 groups: fixation was either performed with 3×3.0mm headless cannulated compression screws (HCCSs) in anteroposterior (AP) orientation (AP group), 3×3.0mm HCCSs in posteroanterior (PA) orientation (PA group) or with 2×3.0mm HCCSs in PA orientation and 1×3.0mm HCCS in lateral orientation (LAT) group. Displacement under cyclic loading and ultimate load-to-failure were evaluated in all specimens. There was no significant difference in fragment displacement after 2000 cycles between AP and PA groups (0.8±0.5mm vs. 0.8±0.6mm; P=.987) or PA and LAT groups (0.8±0.6mm vs. 0.8±0.3mm; P=.966). LAT group showed the highest load-to-failure (548±250N) without reaching statistically significant difference to AP group (388±173N; P=.101). There was also no significant difference between AP and PA groups (388±173N vs. 422±114N; P=.649). Variations in screw placement had no statistically significant influence on cyclic displacement or load-to-failure in Dubberley Type IA fractures. However, fracture fixation in 2 planes-both the coronal and the sagittal plane-by adding a screw in a lateral to medial direction may be beneficial to increase primary stability.

Intraoperative slide rail CT assistance in percutaneous sacroiliac joint screws for the treatment of pelvic posterior ring injury

To compare the clinical efficacy of intraoperative slide rail CT combined with C-arm X-ray assistance and just C-arm for percutaneous screw in the treatment of pelvic posterior ring injury. A retrospective analysis was performed on the patient data of 76 patients with posterior pelvic ring injury admitted to the Department of Orthopedic Trauma from December 2018 to February 2022. Among them, 39 patients in the CT group were treated with C-arm combined with slide rail CT-assisted inline fixation including 23 males and 16 females with an average age of (44.98±7.33) years old;and the other 37 patients in the C-arm group were treated with intraline fixation treatment under only C-arm fluoroscopy including 24 males and 13 females with an average age of (44.37±10.82) years old. Among them, 42 patients with anterior ring fractures were treated with percutaneous inferior iliac spines with internal fixation (INFIX) or suprapubic support screws to fix the anterior pelvic ring. Postoperative follow-up time, operation time, complications of the two groups were compared. Results of Matta reduction criteria, Majed efficacy evaluation, the CT grading and the rate of secondary surgical revision were compared. The nailing time of (32.63±7.33) min in CT group was shorter than that of (52.95±10.64) min in C-arm group (t=-9.739, P<0.05). The follow-up time between CT group (11.97±1.86) months and C-arm group (12.03±1.71) months were not statistically significant(P>0.05). The postoperative complication rates between two groups were not statistically significant (χ2=0.159, P>0.05). Results of Matta reduction criteria (Z=2.79, P<0.05), Majeed efficacy evaluation(Z=2.79, P<0.05), CT grading (Z=2.83, P<0.05) in CT group were better than those in C-arm group(P<0.05); the secondary surgical revision rate in the CT group was significantly lower than that in the C-arm group (χ2=5.641, P<0.05). Compared with traditional C-arm fluoroscopy, intraoperative slide rail CT combined with C-arm assisted percutaneous sacroiliac joint screw placement surgery has the characteristics of short operation time, high accuracy and safety, and significant decrease in postoperative secondary revision rate, and is one of the effective methods for re-establishing the stability of the posterior ring of pelvic fracture.

Optimizing Subtalar Arthrodesis: A Human Cadaveric Evaluation of a Novel Partially-Threaded Screw Combination in the Delta Configuration.

Background and Objectives: Despite the established role of subtalar joint arthrodesis (SJA) for treatment of subtalar osteoarthritis, achieving bone union remains challenging, with up to 46% non-union rates. Adequate compression and stable fixation are crucial for successful outcomes, with internal screw fixation being the gold standard for SJA. The delta configuration, featuring highly divergent screws, offers stability, however, it can result in hardware irritation in 20-30% of patients. Solutions to solve this complication include cannulated compression screw (CCS) countersinking or cannulated compression headless screw (CCHS) application. The aim of this biomechanical study was to investigate the stability of a delta configuration for SJA utilizing either a combination of a posterior CCHS and an anterior CCS or a standard two-CCS combination. Materials and Methods: Twelve paired human cadaveric lower legs were assigned pairwise to two groups for SJA using either two CCSs (Group 1) or one posterior CCHS and one anterior CCS (Group 2). All specimens were tested under progressively increasing cyclic loading to failure, with monitoring of the talocalcaneal movements via motion tracking. Results: Initial stiffness did not differ significantly between the groups, p = 0.949. Talocalcaneal movements in terms of varus-valgus deformation and internal-external rotation were significantly bigger in Group 1 versus Group 2, p ≤ 0.026. Number of cycles until reaching 5° varus-valgus deformation was significantly higher in Group 2 versus Group 1, p = 0.029. Conclusions: A delta-configuration SJA utilizing a posterior CCHS and an anterior CCS is biomechanically superior versus a standard configuration with two CCSs. Clinically, the use of a posterior CCHS could prevent protrusion of the hardware in the heel, while an anterior CCS could facilitate less surgical time and thus less complication rates.

Biomechanical study of a biplanar double support screw (BDSF) technique based on Pauwels angle in femoral neck fractures: finite element analysis.

The objective of the present study is to conduct a comparative analysis of the biomechanical advantages and disadvantages associated with a biplanar double support screw (BDSF) internal fixation device. Two distinct femoral neck fracture models, one with a 30° angle and the other with a 70° angle, were created using a verified and effective finite element model. Accordingly, a total of eight groups of finite element models were utilized, each implanted with different configurations of fixation devices, including distal screw 150° BDSF, distal screw 165° BDSF, 3 CLS arranged in an inverted triangle configuration, and 4 CLS arranged in a "α" configuration. Subsequently, the displacement and distribution of Von Mises stress (VMS) in the femur and internal fixation device were assessed in each fracture group under an axial load of 2100N. At Pauwels 30° Angle, the femur with a 150°-BDSF orientation exhibited a maximum displacement of 3.17mm, while the femur with a 165°-BDSF orientation displayed a maximum displacement of 3.13mm. When compared with the femoral neck fracture model characterized by a Pauwels Angle of 70°, the shear force observed in the 70° model was significantly higher than that in the 30° model. Conversely, the stability of the 30° model was significantly superior to that of the 70° model. Furthermore, in the 70° model, the BDSF group exhibited a maximum femur displacement that was lower than both the 3CCS (3.46mm) and 4CCS (3.43mm) thresholds. The biomechanical properties of the BDSF internal fixation device are superior to the other two hollow screw internal fixation devices. Correspondingly, superior biomechanical outcomes can be achieved through the implementation of distal screw insertion at an angle of 165°. Thus, the BDSF internal fixation technique can be considered as a viable closed reduction internal fixation technique for managing femoral neck fractures at varying Pauwels angles.

Hidden blood loss and the influential factors after minimally invasive treatment of posterior pelvic ring injury with sacroiliac screw

BackgroundTo analyze the perioperative bleeding and hidden blood loss (HBL) of sacroiliac screw minimally invasive treatment of pelvic posterior ring injury and explore the influential factors of HBL after operation for providing reference for clinical treatment.MethodA retrospective analysis was conducted on data from 369 patients with posterior pelvic ring injuries treated with sacroiliac screws internal fixation at our hospital from January 2015 to January 2022. The research was registered in the Chinese Clinical Trial Registry in July 2022 (ChiCTR2200061866). The total blood loss (TBL) and HBL of patients were counted, and the factors such as gender, age, and surgical duration were statistically analyzed. The influential factors of HBL were analyzed by multiple linear regression.ResultsThe TBL was 417.96 ± 98.05 ml, of which the visible blood loss (VBL) was 37.00 ± 9.0 ml and the HBL was 380.96 ± 68.8 ml. The HBL accounted for 91.14 ± 7.36% of the TBL. Gender, surgical duration, fixed position, and fixed depth had significant effects on the HBL (P < 0.05).ConclusionsThe HBL was the main cause of anemia after minimally invasive treatment of posterior pelvic ring injury with a sacroiliac screw. Gender, surgical duration, fixed position, and fixed depth were closely related to the occurrence of HBL. In clinical treatment, we should consider these influential factors and take effective measures to reduce the impact of HBL on patients.

Comparison of effectiveness of three surgical methods in treatment of Pauwels type Ⅲ femoral neck fracture in young and middle-aged patients

To compare the effectiveness of three surgical methods in the treatment of Pauwels type Ⅲ femoral neck fracture in young and middle-aged patients, in order to provide reference for clinical selection of appropriate surgical methods. The clinical data of 103 patients with Pauwels type Ⅲ femoral neck fracture who met the selection criteria between June 2018 and December 2021 were retrospectively analyzed. The fractures were fixed with hollow screws in an inverted triangular shape (37 cases, hollow screw group), hollow screws in an inverted triangular shape combined with eccentric shaft screw (34 cases, eccentric shaft screw group), and hollow screws in an inverted triangular shape combined with medial support plate (32 cases, support plate group). There was no significant difference in age, gender, cause of injury, body mass index, time from injury to operation, side of the fracture, and Garden classification, whether they were in traction preoperatively, and other baseline data between groups ( P>0.05). The operation time, intraoperative blood loss, the number of fluoroscopy, the length of hospital stay, early postoperative complication and postoperative weight-bearing time of the three groups were recorded. Harris score was used to evaluate joint function at 6 and 12 months after operation, and the difference between the two time points (change value) was calculated for comparison between groups. X-ray films were reviewed to evaluate the quality of fracture reduction (Garden index) and healing, as well as the occurrence of internal fixation failure and femoral head necrosis. The patients of the three groups were successfully completed. Compared with the hollow screw group and the eccentric shaft screw group, the operation time and intraoperative blood loss of the support plate group significantly increased, the number of fluoroscopy reduced, and the quality of fracture reduction was better, the differences were significant ( P<0.05). The operation time, intraoperative blood loss, and the number of fluoroscopy of the hollow screw group were less than those of the eccentric shaft screw group, the differences were significant ( P<0.05). There was no significant difference in the length of hospital stay between groups ( P>0.05). All patients in the three groups were followed up 21-52 months, with an average follow-up time of 36.0 months, and there was no significant difference between groups ( P>0.05). The incisions of all patients healed by first intention. Imaging reexamination showed that there was no significant difference in the incidence of fracture nonunion between groups ( P>0.05). The fracture healing, partial weight-bearing, and full weight-bearing were significantly earlier in the eccentric shaft screw group and the support plate group than in the hollow screw group ( P<0.05). There was no significant difference in change value of Harris score, the incidence of postoperative deep venous thrombosis and femoral head necrosis between groups ( P>0.05); however, the incidence of internal fixation failure in the support plate group and the eccentric shaft screw group was significantly lower than that in the hollow screw group ( P<0.05). The incidence of postoperative lateral thigh irritation in the support plate group was significantly lower than that in the hollow screw group ( P<0.05); there was no significant difference between the eccentric shaft screw group and the other two groups ( P>0.05). The overall incidences of postoperative complications in the eccentric shaft screw group and the support plate group were significantly lower than that in the hollow screw group ( P<0.05). For young and middle-aged patients with Pauwels type Ⅲ femoral neck fracture, compared with simple hollow screw fixation in an inverted triangular shape, combined with medial support plate or eccentric shaft screw internal fixation can shorten the fracture healing time, reduce the incidences of postoperative complication, more conducive to early functional exercise of the affected limb; at the same time, the operation time and blood loss of combined eccentric shaft screw internal fixation are less than those of combined medial support plate internal fixation, so the hollow screw in an inverted triangular shape combined with eccentric shaft screw fixation may be a better choice.

Correlation between combined deflection angle classification adduction typing and complications after internal fixation of adduction femoral neck fracture

To analyze the correlation between postoperative complications and combined deflection angle classification adduction type (CDAC-ADT) of femoral neck fractures after cannulated screw internal fixation. The clinical data of 121 patients with CDAC-ADT femoral neck fracture admitted between January 2018 and December 2021 and met the selected criteria were retrospectively analyzed. There were 69 males and 52 females, the age ranged from 19 to 79 years (mean, 48.1 years). The causes of injury included 52 cases of traffic accident, 24 cases of falling from height, and 45 cases of fall. The time from injury to operation ranged from 2 to 12 days, with an average of 6.0 days. Among them, there were 18 cases of CDAC-ADT type Ⅰ, 46 cases of type Ⅱ, and 57 cases of type Ⅲ; 6 cases of Garden type Ⅱ, 103 cases of type Ⅲ, and 12 cases of type Ⅳ; and according to the location of the fracture line, there were 26 cases of subcapitate type, 88 cases of transcervical type, and 7 cases of basal type. All patients were treated with cannulated screw internal fixation. The occurrence of complications (including internal fixation failure, fracture nonunion, and osteonecrosis of the femoral head) was recorded, and the correlation between complications and CDAC-ADT typing, Garden typing, and fracture line location were analyzed. The patients were followed up 8-44 months, with a mean of 24.9 months. There were 10 cases of internal fixation failure, 7 cases of fracture nonunion, and 30 cases of osteonecrosis of the femoral head after operation. Correlation analysis showed that patients' CDAC-ADT typing was significantly correlated with the overall incidence of complication and the incidence of internal fixation failure, fracture nonunion, and osteonecrosis of the femoral head ( P<0.05), and the Pearson coefficient of contingency were 0.435, 0.251, 0.254, and 0.241, respectively. Garden typing did not correlate with the overall incidence of complication and the incidence of internal fixation failure and fracture nonunion ( P>0.05), but correlated with the incidence of osteonecrosis of the femoral head ( P<0.05), and the Pearson coefficient of contingency was 0.251. Fracture line position typing had no correlation with the overall incidence of complication and the incidence of internal fixation failure, fracture nonunion, and osteonecrosis of the femoral head ( P>0.05). CDAC-ADT typing has obvious correlation with postoperative complications of femoral neck fracture and can be used to predict complications of femoral neck fracture.

Forces required to dynamize sliding screws in gamma nail and selfdynamizable internal fixator.

Single limb support phase of the gait-cycle in patients who are treated for a pertrochanteric fracture is characterized by transversal loads acting on the lag screw, tending to block its dynamization. If the simultaneous axial force overcomes transversal loads of the sliding screw, the dynamization can still occur. Biomechanical investigation was performed for three types of dynamic implants: Gamma Nail, and two types of Selfdynamizable Internal Fixators (SIF) - SIF-7 (containing two 7mm non-cannulated sliding screws), and SIF-10 (containing one 10mm cannulated sliding screw). Contact surface between the stem and the sliding screws is larger in SIF implants than in Gamma Nail, as the stem of Gamma Nail is hollow. A special testing device was designed for this study to provide simultaneous application of a controlled sliding screws bending moment and a controlled transversal load on sliding screws (Qt) without using of weights. Using each of the implants, axial forces required to initiate sliding screws dynamization (Qa) were applied and measured using a tensile testing machine, for several values of sliding screws bending moment. Standard least-squares method was used to present the results through the linear regression model. Positive correlation between Qt and Qa was confirmed (p < 0.05). While performing higher bending moments in all the tested implants, Qa was higher than it could be provided by the body weight. It was the highest in Gamma Nail, and the lowest in SIF-10. A larger contact surface between a sliding screw and stem results in lower forces required to initiate dynamization of a sliding screw. Patients treated for a pertrochanteric fracture by a sliding screw internal fixation who have longer femoral neck or higher body weight could have different programme of early postoperative rehabilitation than lighter patients or patients with shorter femoral neck.

Experimental Study of Strain Measurement using 2D Digital Image Correlation on Fixation Plate and Calcaneus Bone Fracture

The plate and screw internal fixation technique is widely used for the treatment of fractured bones. Determining the mechanical behavior of bone plates under load conditions remains challenging, as it is anisotropic, non-linear, and inhomogeneous. Bone strain is frequently measured using strain gages, but they can only measure the strain at a single point. The optical method known as digital image correlation (DIC) provides the displacement and consequently the strain over the entire region of interest on the bone surface. The objective of this study was to investigate the strain changes in the surface of a calcaneus plate fixation during load compression using the digital image correlation method. In this study, a two-dimensional digital image correlation (2D-DIC) and strain gauges-based experimental methodology for calculating calcaneal plate strains is presented. A 500 N static load was applied to a synthetic calcaneus that was both plate-covered and intact. A Sanders type II fractured calcaneus was stabilized with stainless steel (316L) plate. At the same locations on the calcaneus plate, displacement and strains were recorded. According to the results of the DIC method, the maximum strain values along the x, y, and shear directions were 0.008, 0.010, and 0.012 mm, respectively, while the measurement result for the strain gauge was 0.0015 mm. The experimental result had a slightly lower strain gauge than the DIC method’s output. The results of the experiment and the DIC were thought to be in good agreement.

Correlation analysis between combined deflection angle and osteonecrosis of femoral head after femoral neck fracture

To evaluate the correlation between pelvic incidence (PI) angle, hip deflection angle (HDA), combined deflection angle (CDA) and osteonecrosis of the femoral head (ONFH) after femoral neck fracture, in order to explore early predictive indicators for ONFH occurrence after femoral neck fracture. A study was conducted on patients with femoral neck fractures who underwent cannulated screw internal fixation between December 2018 and December 2020. Among them, 208 patients met the selection criteria and were included in the study. According to the occurrence of ONFH, the patients were allocated into ONFH group and non-NOFH group. PI, HDA, and CDA were measured based on the anteroposterior X-ray films of pelvis and axial X-ray films of the affected hip joint before operation, and the differences between the two groups were compared. The receiver operating characteristic curve (ROC) was used to evaluate the value of the above imaging indicators in predicting the occurrence of ONFH. Among the 208 patients included in the study, 84 patients experienced ONFH during follow-up (ONFH group) and 124 patients did not experience ONFH (non-ONFH group). In the non-ONFH group, there were 59 males and 65 females, the age was 18-86 years (mean, 53.9 years), and the follow-up time was 18-50 months (mean, 33.2 months). In the ONFH group, there were 37 males and 47 females, the age was 18-76 years (mean, 51.6 years), and the follow-up time was 8-45 months (mean, 22.1 months). The PI, HDA, and CDA were significantly larger in the ONFH group than in the non-ONFH group ( P<0.05). ROC curve analysis showed that the critical value of PI was 19.82° (sensitivity of 40.5%, specificity of 86.3%, P<0.05); the critical value of HDA was 20.94° (sensitivity of 77.4%, specificity of 75.8%, P<0.05); and the critical value of CDA was 39.16° (sensitivity of 89.3%, specificity of 83.1%, P<0.05). There is a correlation between PI, HDA, CDA and the occurrence of ONFH after femoral neck fracture, in which CDA can be used as an important reference indicator. Patients with CDA≥39.16° have a higher risk of ONFH after femoral neck fracture.

Effectiveness of unilateral biportal endoscopy combined with percutaneous pedicle screw fixation in treatment of lumbar burst fractures with neurological symptoms

To evaluate the effectiveness of spinal canal decompression assisted by unilateral biportal endoscopy (UBE) and percutaneous uniplanar pedicle screw internal fixation in the treatment of lumbar burst fractures with neurological symptoms. Between June 2021 and December 2022, 10 patients with single level lumbar burst fracture with neurological symptoms were treated with spinal canal decompression assisted by UBE and percutaneous uniplanar pedicle screw internal fixation. There were 7 males and 3 females with an average age of 43.1 years (range, 21-57 years). The injured vertebrae located at L 1 in 2 cases, L 2 in 4 cases, L 3 in 3 cases, and L 4 in 1 case. There were 7 cases of AO type A3 fractures and 3 cases of AO type A4 fractures. The total operation time, the time of operation under endoscopy, and complications were recorded. Pre- and post-operative visual analogue scale (VAS) score and American Spinal Injury Association (ASIA) scale (grading A-E corresponding to assigning 1-5 points for statistical analysis) were used to evaluate effectiveness. X-ray film and CT were performed to observe the fracture healing, and the ratio of anterior vertebral body height, Cobb angle, and rate of spinal canal invasion were measured to evaluate the reduction of fracture. All operations was successfully completed, and the spinal canal decompression and the bone fragment in spinal canal reduction completed under the endoscopy. Total operation time was 119 minutes on average (range, 95-150 minutes), and the time of operation under endoscopy was 46 minutes on average (range, 35-55 minutes). There was no complication such as dural sac, nerve root, or blood vessel injury during operation. All incisions healed by first intention. All patients were followed up 18.7 months on average (range, 10-28 months). The VAS score after operation significantly decreased when compared with that before operation ( P<0.05), and further improved at last follow-up ( P<0.05). The ASIA scale after operation significantly improved when compared with that before operation ( P<0.05), and there was no significant difference ( P>0.05) in the ASIA scale between at 1 week after operation and at last follow-up. The imaging examination showed that the screw position was good and the articular process joint was preserved. During follow-up, there was no loosening, fracture, or fixation failure of the internal fixation. The ratio of anterior vertebral body height and Cobb angle significantly improved, the rate of spinal canal invasion significantly decreased after operation ( P<0.05), and without significant loss of correction during the follow-up ( P>0.05). Spinal canal decompression assisted by UBE and percutaneous uniplanar pedicle screw fixation is a feasible minimally invasive treatment for lumbar burst fractures with neurological symptoms, which can effectively restore the vertebral body sequence, as well as relieve the compression of spinal canal, and improve the neurological function.