Screw Insertion Angle Research Articles

Changes in nail position and antirotation blade angles on the risk of femoral head varus in PFNA fixed patients: a clinical review and comprehensive biomechanical research

BackgroundFemoral head varus triggers poor clinical prognosis in intertrochanteric fracture patients with proximal femoral nail antirotation (PFNA) fixation. Studies present that changes in nail position and screw insertion angles will affect fixation stability, but the biomechanical significance of these factors on the risk of femoral head varus has yet to be identified in PFNA fixed patients.MethodsClinical data in PFNA fixed intertrochanteric fracture patients have been reviewed, the relative position of intermedullary nail has been judged in the instant postoperative lateral radiography. Regression analyses have been performed to identify the effect of this factor on femoral head varus. Corresponding biomechanical mechanism has been identified by numerical mechanical simulations.ResultsA clinical review revealed that ventral side nail insertion can trigger higher risk of femoral head varus, corresponding numerical mechanical simulations also recorded poor fixation stability in models with ventral side nail insertion, and changes in the trajectory of anti-rotation blade will not obviously affect this tendency.ConclusionsVentral side insertion of intramedullary nail can trigger higher risk of femoral head varus in PFNA fixed patients by deteriorating the instant postoperative biomechanical environment, and changes in blade trajectory cannot change this tendency biomechanically. Therefore, this nail position should be adjusted to optimize patients’ prognosis.

Factors Affecting Postoperative Courses After Removal of Transphyseal Screws Inserted for Correction of Genu Valgum.

The aim of this study was to investigate factors determining the final outcomes of hemipercutaneous epiphysiodesis using transphyseal screw (PETS) for the genu valgum, especially focusing on postoperative courses after screw removal. Fifty-five patients with idiopathic genu valgum treated with hemi-PETS were included. The mechanical lateral distal femoral angle (mLDFA) and medial proximal tibial angle (MPTA) were measured to calculate the degree of correction and rebound. Regarding factors related to surgical techniques, the number of screw threads beyond the physis, the moment arm of the screw, and screw insertion angles were measured. In 54 femoral segments (randomly selected in bilateral cases), hemi-PETS was performed with a growth remaining of 2.0±0.6 years. The screw was removed after 6.5±2.1 months, and the degree of correction was 5.0±1.5 degrees. The mean rebound angle was -0.4±2.4 (the negative value means further correction after screw removal). A late time of surgery and an extreme peripheral position of a screw were associated with the growth inhibition. In 50 tibial segments (also randomly selected in bilateral cases), a screw was inserted with a growth remaining of 2.0±0.6 years and removed after 6.3±1.9 months. The degree of correction was 2.9±1.7 degrees during the interval, and the rebound angle was 0.8±1.7 degrees. An earlier time of surgery and a greater correction angle before screw removal were associated with the rebound phenomenon. Growth inhibition of >1.6 degrees was observed in about one-fourth of femoral segments. An extreme peripheral position of a screw should be avoided when performing hemi-PETS at the distal femur. We also recommend not performing hemi-PETS at distal femur with too short a period of growth remaining. Level III-retrospective comparative series.

Three-Dimensional Analysis of Polyaxial Volar Locking Plate Position for Distal Radius Fracture

Abstract Background To avoid screw penetration into the joint when using the polyaxial volar locking plate (VLP) for osteosynthesis of distal radius fractures, it is important to note that the optimal screw insertion angles depending on the plate positions. Purpose The purpose of this study was 2-fold: first, to evaluate the differences of the most distal plate position where the screw does not penetrate into the joint in the three-dimensional (3D) radius models; second, to evaluate the relationship between the plate position and the transverse diameter of the distal radius. Patients and Methods Thirty plain X-rays and computed tomography (CT) scans of healthy wrists were evaluated. The transverse diameter was measured on plain X-rays. 3D radius models were reconstructed from CT data. A 3D image of polyaxial VLP was used to investigate the most distal plate position at three different screw insertion angles. The linear distance between the volar articular edge and the plate edge was measured and compared among different screw insertion angles. The correlations between the plate positions and the transverse diameter were also evaluated. In addition, the relationship between the most distal screw place and articular surface was confirmed with one case of distal radius fracture. Results The optimal positions relative to the neutral were 2.7 mm proximal in the distal swing and 1.9 mm distal in the proximal swing. The linear distance was significantly correlated with the transverse diameter in each group. It was confirmed that the relationship between the most distal screw place and articular surface was applicable in the actual case. Conclusion The results showed that the most distal position of the polyaxial VLP differed depending on the screw insertion angle and became more proximal as the transverse diameter increased. These results may be useful as a reference for preoperative planning. Levels of Evidence III.

Pull-out strength of screws in long bones at different insertion angles: finite element analysis and experimental investigations

Abstract Different types of plates are available to allow insertion of screws for internal fixation of long bone fractures. The aim of the study was to determine the effect of the insertion of screws at different angles on a long bone to the pull-out strength. Using 3D printed bone models, we tested the pull-out strength of screws in long bones at insertion angles between 0 and 40° with both finite element analysis and on printed models experimentally and compared the results. Test samples and cortical screws used were modeled with SolidWorks software and analyzed with Ansys software. As the screw insertion angle increases, the pull-out forces on the test specimens increase from 61.14 ± 3.5 N at 0° to 273 ± 6.8 N at 40° with an exception of a small drop between 15 and 20° from 235.4 ± 6.2 to 233 ± 6.9 N. Both methods showed an increase in the pull-out strength of screws as the insertion angle increases. This might be applicable in the clinical practice of bone fixation. Further studies on plate and screw fixation are needed to complement the findings.

Ten technical aspects of baseplate fixation in reverse total shoulder arthroplasty for patients without glenoid bone loss: a systematic review.

The aim of this systematic review was to collect evidence on the following 10 technical aspects of glenoid baseplate fixation in reverse total shoulder arthroplasty (rTSA): screw insertion angles; screw orientation; screw quantity; screw length; screw type; baseplate tilt; baseplate position; baseplate version and rotation; baseplate design; and anatomical safe zones. Five literature libraries were searched for eligible clinical, cadaver, biomechanical, virtual planning, and finite element analysis studies. Studies including patients >16 years old in which at least one of the ten abovementioned technical aspects was assessed were suitable for analysis. We excluded studies of patients with: glenoid bone loss; bony increased offset-reversed shoulder arthroplasty; rTSA with bone grafts; and augmented baseplates. Quality assessment was performed for each included study. Sixty-two studies were included, of which 41 were experimental studies (13 cadaver, 10 virtual planning, 11 biomechanical, and 7 finite element studies) and 21 were clinical studies (12 retrospective cohorts and 9 case-control studies). Overall, the quality of included studies was moderate or high. The majority of studies agreed upon the use of a divergent screw fixation pattern, fixation with four screws (to reduce micromotions), and inferior positioning in neutral or anteversion. A general consensus was not reached on the other technical aspects. Most surgical aspects of baseplate fixation can be decided without affecting fixation strength. There is not a single strategy that provides the best outcome. Therefore, guidelines should cover multiple surgical options that can achieve adequate baseplate fixation.

Effect of screw insertion angle and speed on the incidence of transcortical fracture development in a canine tibial diaphyseal model.

To assess the incidence of transcortical fracture (TCF) development based on screw insertion angle and screw insertion speed. Cadaveric experimental study. Sixty-six canine tibiae. Sixty-six cadaveric tibiae were randomly assigned to one of six groups that varied based on screw insertion angle relative to the pilot hole (0, 5, or 10°) and screw insertion speed (650 or 1350 revolutions per minute [rpm]). Each tibia was mounted in a custom jig. Locking self-tapping screws (3.5 mm) were inserted at varying speeds and insertion angles, based on group assignment. Orthogonal radiographs were evaluated for TCFs. Fisher's exact tests with a Bonferroni correction were performed to evaluate differences in the frequency of TCF between groups. In Group A (0°/650 rpm: control), a 0% TCF rate was observed (n = 0/80). Group B (5°/650 rpm) had a 3.75% TCF rate (n = 3/80). Group C (10°/650 rpm) had a 12.5% TCF rate (n = 10/80). Group D (10°/hand insertion) had a 3.75% TCF rate (n = 3/80). Group E (10°/1350 rpm) had a 17.5% TCF rate (n = 14/80). Group F (0°/1350 rpm) had a 0% TCF rate (n = 0/80). Groups C and E had the highest TCF rates with a difference in TCF rates observed between the control group and Group C (p = .001) and between the control group and Group E (p < .001). Increased screw insertion angle and insertion speed appear to be predisposing factors for TCF development in cadaveric bone. Ensuring screw insertion is coaxial with the pilot hole and using slower screw insertion speeds may help reduce the risk of TCF development.

A new posterosuperior screw placement strategy to avoid in-out-in screws in femoral neck fractures.

The inverted triangle configuration of the three cannulated screws is the classic fixation method most commonly performed for undisplaced femoral neck fractures in young and geriatric patients. However, the posterosuperior screw has a high incidence of cortical breach, known as an in-out-in (IOI) screw. In this study, we present a novel posterosuperior screw placement strategy to prevent the screw from becoming IOI. Using computed tomography data and image-processing software, 91 undisplaced femoral neck fractures were reconstructed. The anteroposterior (AP), lateral, and axial radiographs were simulated. To simulate the intraoperative screw placement process, participants used three screw insertion angles (0°, 10°, and 20°) to place the screw on the AP and lateral views of the radiograph according to the three established strategies. On the AP radiograph, a screw was placed abutting (strategy 1), 3.25 mm away from (strategy 2), or 6.5 mm away from (strategy 3) the superior border of the femoral neck. On the lateral radiograph, all the screws were placed abutting the posterior border of the femoral neck. Axial radiographs were used to evaluate the screw position. In strategy 1, all the placed screws were IOI regardless of the screw insertion angle. In strategy 2, 48.3% (44/91) of IOI screws occurred at a 0° screw insertion angle, 41.7% (38/91) of IOI screws occurred at a 10° screw insertion angle, and 42.9% (39/91) of IOI screws occurred at a 20° screw insertion angle situation. In strategy 3, no IOI screw occurred, and the screw insertion angles did not affect the safety and accuracy of screw placement. Screws placed according to strategy 3 are safe. The reliability of this screw placement strategy is unaffected by a screw insertion angle of less than 20 degrees.

Computed Tomography-Based Occipital Condyle Morphometric Analysis in the Turkish Population: A Trajectory Analysis for Optimal Screw Selection.

To provide a comprehensive analysis for accurate screw size selection and insertion angle during surgical procedures. In this retrospective study, a total of 120 patients participated, resulting in the analysis of 240 occipital condyles using coronal, sagittal, and axial planes on CT scans. Statistical evaluation was performed using the Wilcoxon rank-sum test, with p < 0.05 considered statistically significant. The mean sagittal length and height were measured at 17.2 ± 1.7 mm and 9.1 ± 1.5 mm, respectively. The average condyle angle, a crucial factor for screw insertion, was assessed at 38.0 ± 5.5 mm in length, 19.6 ± 2.6 mm in width, and 9.5 ± 1.0 mm in height. Condyle height in the anterior and posterior hypoglossal canals was measured at 10.8 ± 1.4 mm and 9.0 ± 1.4 mm, respectively. Screw angle and condyle width were statistically smaller in females compared to the male population. The OC is a significant anatomical structure in the craniovertebral junction, playing a crucial role in stability. The obtained morphological values are applicable to the Turkish population and offer statistically significant findings for preoperative planning involving occipital condyle screw instrumentation.

Failure analysis of a locking compression plate with asymmetric holes and polyaxial screws

Locking compression plates (LCP) with asymmetrical holes and polyaxial screws are effective for treating mid-femoral fractures, but are prone to failure in cases of bone nonunion. To understand the failure mechanism of the LCP, this study assessed the material composition, microhardness, metallography, fractography and biomechanical performance of a retrieved LCP used for treating a bone fracture of AO type 32-A1. For the biomechanical assessment, a finite element surgical model implanted with the intact fixation-plate system was constructed to understand the stresses and structural stiffness on the construct. Also, to avoid positioning screws around the bone fracture, different working lengths of the plate (the distance between the two innermost screws) and screw inclinations (±5°, ±10° and ±15°) were investigated. The fracture site of the retrieved LCP was divided into a narrow side and broad side due to the asymmetrical distribution of holes on the plate. The results indicated that the chemical composition and microhardness of the LCP complied with ASTM standards. The fatigue failure was found to originate on the narrow side of the hole, while the broad side showed overloading characteristics of crack growth. When the screws were inserted away from the region of the bone fracture by increasing the working length, the stress of the fixation-plate system decreased. Regardless of the screw insertion angle, the maximum stress on the LCP always appeared on the narrow side, and there was little change in the structural stiffness. However, angling the screws at −10° resulted in the most even stress distribution on the fixation-plate system. In conclusion, the LCP assessed in this study failed by fatigue fracture due to bone nonunion and stress concentration. The narrow side of the LCP was vulnerable to failure and needs to be strengthened. When treating an AO type 32-A1 fracture using an LCP with asymmetrical holes and polyaxial screws, inserting the screws at −10° may reduce the risk of implant failure and positing screws around the fractured area of the bone should be avoided.

Accuracy of Lateral Mass Screw Insertion during Cervical Spine Surgery without Fluoroscopic Guidance and Comparison of Postoperative Screw Loosening Rate among Unicortical and Bicortical Screws Using Computed Tomography.

Pedicle screws (PSs) or lateral mass screws (LMSs) are used in posterior cervical spine fixation. The former are more firmly fixed but are associated with the risk of neurovascular injury and should be inserted using intraoperative imaging or navigation, which may prolong the surgical duration and is not feasible in all hospitals. This prospective clinical study aimed to evaluate the outcomes of LMS insertions without fluoroscopic guidance and screw loosening rates at 6 months postoperatively using computed tomography (CT). We examined 38 patients who underwent posterior cervical spine fusion using 206 LMSs in the C3-C6 range between January 2018 and July 2021. The direction of screw insertion followed the Magerl method, and we inserted screws as bicortically as possible without intraoperative imaging. The screw position was examined using CT at 1 week postoperatively. Screw insertion angles, bicortical insertion rate, facet violation, and neurovascular injury were evaluated. Screw loosening with unicortical and bicortical screws (US and BS, respectively) was investigated using CT at 6 months postoperatively. The average LMS length was 14.1 mm. The average axial and sagittal angles were 33.9° and 29.2°, respectively. Among the 206 LMSs inserted, 167 were BS; of these, 94.6% had screw length protrusion of 0-2 mm. Facet violation was observed in 3.4% of all screws but without neurovascular injury. Six months postoperatively, loosening of 25 screws (12.1%) occurred, including 17 (18.3%) USs and 8 (8.39%) BSs. The screw loosening rate was significantly higher in US than for BS (43.6% [17/39] vs. 4.8% [8/167], P<0.01). Over 80% of LMSs were inserted bicortically without intraoperative imaging. By devising the screw length selection process, we inserted for screw loosening was more common in US and more likely at the fixed end.

Comparison of the Accuracy and Safety of TiRobot-Assisted and Fluoroscopy-Assisted Percutaneous Pedicle Screw Placement for the Treatment of Thoracolumbar Fractures.

Studies have compared the safety and accuracy of robot-assisted techniques for inserting conventional open pedicle screws for spinal surgery. However, no relevant studies have confirmed that robot-assisted percutaneous screw placement is better than fluoroscopic percutaneous screw placement for the treatment of thoracolumbar fractures. This study compared the accuracy and safety of TiRobot-assisted percutaneous pedicle screw placement with those of the fluoroscopy-assisted percutaneous technique for the treatment of thoracolumbar fractures. This retrospective study included 126 patients with thoracolumbar fractures who underwent percutaneous pedicle screw placement. Sixty-five patients were treated with the TiRobot-assisted technique and 61 patients were treated with the fluoroscopy-assisted technique. Patient demographics, accuracy of screw placement (according to the Gertzbein and Robbins scale of grades A to E), screw insertion angle, radiation exposure, surgical time, intraoperative blood loss, length of hospital stay, incision length, hospital expenses, surgical site infection, and neurological injury of the TiRobot-assisted and fluoroscopy-assisted groups were compared using Student's t-test, Pearson χ2 test, or Fisher's exact test. A total of 729 screws were placed (TiRobot-assisted group: 374 screws; fluoroscopy-assisted group: 355 screws). In the TiRobot-assisted group, 82.8% of screws were optimally positioned (grade A); however, the placement grades of the remaining screws were categorized as grade B (13.3%), grade C (3.2%), and grade D (0.5%). In the fluoroscopy-assisted group, 66.7% of the screws were optimally positioned (grade A); however, the placement grades of the remaining screws were categorized as grade B (21.4%), grade C (7.6%), grade D (3.6%), and grade E (0.5%). The proportion of clinically acceptable screws (grade A or B) was greater in the TiRobot-assisted group than in the fluoroscopy-assisted group. Additionally, the TiRobot-assisted group had a significantly larger mean screw insertion angle (22.27° ± 5.48° vs 20.55° ± 5.15°), larger incision length (13.86 ± 1.24 cm vs 12.77 ± 1.43 cm), and higher hospital expenses (69061.55 ± 7166.60 yuan vs 59383.85 ± 5019.64 yuan) than the fluoroscopy-assisted group. There were no significant differences in the intraoperative blood loss, length of hospital stay, and rates of surgical site infection and neurological injury in both groups (p > 0.05). However, the TiRobot-assisted group had significantly better surgical times, radiation times, and radiation exposure than the fluoroscopy-assisted group (p < 0.05). Percutaneous TiRobot-assisted pedicle screw placement is a safe, useful, and potentially more accurate alternative to the percutaneous fluoroscopy-assisted technique for treating thoracolumbar fractures.

Mechanical and Geometric Analysis of Fenestration Design for Polymethylmethacrylate-Augmented Pedicle Screw Fixation.

The practice of cement augmentation in pedicle screw fixation is well established. However, there is a lack of consensus regarding the optimal screw design or cement type. This remains a clinically important question given the incidence of cement augmentation-associated complications. While fenestrated screws have become widely used in clinical practice, the relationship between fenestration placement along the screw axis and cement plume geometry and pullout strength have yet to be clarified. This study was designed to evaluate the mechanical and geometric properties of different fenestrated screw designs and cement viscosities in pedicle screw fixation. Three different screw fenestration configurations and 2 different cement viscosities were examined in this study. Axial pullout tests were conducted in both foam blocks and cadaveric vertebrae. All vertebral specimens underwent tests of bone mineral density. In the foam blocks, 6 tests were conducted for each augmentation combination and also for nonaugmented controls. In the cadaveric testing, 36 lumbar vertebrae were instrumented with a cemented and uncemented control screw to compare features of fixation. Computed tomography (CT) images were taken to assess the geometric profile of the cement plumes in both the foam blocks and the cadaveric vertebrae. In both foam blocks and vertebral specimens, cementation was shown to confer a significant increase in pullout strength. Significant correlations existed between the anterior-posterior and lateral cement plume diameters and pullout strength in cadaveric vertebra and foam blocks, respectively. Within instrumented vertebra, variables such as the width of the vertebral body and screw insertion were found to significantly correlate with enhanced fixation. CT analysis of the instrumented vertebra demonstrated that a centrally distributed pattern of fenestrations was found to result in a cement plume with consistently predictable distribution within the vertebral body, without evidence of leak. Cementation of fenestrated pedicle screws increases overall pullout forces; however, there is an unclear relationship between the geometric properties of the cement plume and the overall strength of the screw-bone interface. This study demonstrates that the plume diameter, vertebral body width, and angle of screw insertion are correlated with enhanced pullout strength. Furthermore, varying the fenestration design of injectable screws resulted in a set of predictable plume patterns, which may be associated with fewer complications. Further investigation is required to clarify the optimal geometric and biomechanical properties of injectable pedicle screws and their role in establishing the cement-bone interface. This study is relevant to currently practicing spinal surgeons and biomechanical engineers.

What Is the Cost of Off-Axis Insertion of Locking Screws? A Biomechanical Comparison of a 3.5 mm Fixed-Angle and 3.5 mm Variable-Angle Stainless Steel Locking Plate Systems.

The aim of this study was to evaluate the effect of screw insertion angle and insertion torque on the mechanical properties of a 3.5 fixed-angle locking plate locking compression plate (LCP) and 3.5 variable-angle locking plate polyaxial locking system (PLS). In the LCP group, screws were placed abaxially at 0, 5 and 10 degrees. In the PLS group, screws were placed at 0, 5, 10, 15 and 20 degrees abaxially. The insertion torque was set to 1.5 and 2.5 Nm in the LCP and PLS groups respectively. A load was applied parallel to the screw axis, and the screw push-out force was measured until the locking mechanism was loosened. The 3.5 LCP showed higher push-out strength than the 3.5 PLS when the screws were placed at 0 degree regardless of the insertion torque. The off-axis insertion of 3.5 LCP locking screws resulted in a significant decrease in push-out strength (p < 0.05). A higher insertion torque value significantly increased the screw holding strength for the 3.5 LCP (p < 0.05). The 3.5 PLS system had a significantly higher push-out force when the screws are at 0 degree than at 5, 10 and 15 degrees, and 20 degrees (p < 0.05) at any given insertion torque. An increase in the insertion torque did not have a significant effect on the push-out strength of the 3.5 PLS locking system. The 3.5 PLS is more sensitive to the screw insertion angle than to the insertion torque, whereas the 3.5 LCP is affected by both factors. Placing 3.5 LCP locking screws off-axis significantly reduces the screw holding strength; therefore, this approach has to be avoided. The findings of our research indicate that a 1.5 Nm torque can be used for a 3.5 PLS.

Evaluating the Stability of Locking Screw on Locking Compression Plate According to Various Screw Insertion Angles

Evaluating the Stability of Locking Screw on Locking Compression Plate According to Various Screw Insertion Angles

Reducing the Risk of Neurovascular Injury With Posteromedial Plating and Laterally Directed Screw Insertion During Opening-Wedge High Tibial Osteotomy.

Background:Neurovascular injury is a serious complication after opening-wedge high tibial osteotomy (OWHTO).Purpose:To evaluate (1) how neurovascular injuries during fixation can be prevented and (2) whether a lateral hinge–directed posteromedial fixation system provides comparable neurovascular safety during OWHTO to conventional and custom-made locking plate systems.Study Design:Cohort study; Level of evidence, 3.Methods:Included were 275 knees that underwent OWHTO from March 2014 to May 2018. The knees were divided into 4 groups based on the type of fixation system used: (1) lateral hinge–directed system (LCfit HTO; LCfit group), (2) TDM decisive wedge locking plate (TDM group), (3) OhtoFix anatomic locking metal block plate (OhtoFix group), and (4) TomoFix titanium locking plate (TomoFix group). Using postoperative computed tomography, the following variables among the groups were compared: screw insertion angle relative to the tibia posterior cortex in the axial plane, length, proximity to neurovascular structures, and safety angle of screw fixation (angle between the most proximal posterior screw insertion line and a line tangent to the popliteal artery from the screw hole). Radiological and clinical outcomes were also compared between groups.Results:The screw angle was significantly smaller and the distance from neurovascular structures to the screw extension line was significantly farther in the LCfit group compared with the other 3 groups (P < .001 for both). The safety angle was also wider in the LCfit group than in the other groups (P < .001). There were no significant differences in radiologic or clinical outcomes between the groups during follow-up.Conclusion:The distance from the neurovascular structures to the screw extension line was significantly farther, and the safety angle was also significantly wider with the laterally directed posteromedial plate system compared with the other systems. There were no neurovascular injuries in any group or significant differences in clinical outcomes or radiological parameters between the LCfit and the other locking plate systems.

Optimization of Locking Plate Screw Angle Used to Treat Two-Part Proximal Humerus Fractures to Maintain Fracture Stability

Proximal humerus fractures increase with the aging of the population. Due to the high failure rates of surgical treatments such as open reduction and internal fixation (ORIF), biomechanical studies seek to optimize the treatments and intervening factors to improve the quality of life of people undergoing these treatments. The aim of the present study was to determine the optimal insertion angle configuration of screws used in a two-part proximal humerus fracture-locking plate osteosynthesis treatment based on finite element analysis (FEA). A series of 3D models of PHILOS locking plates with different screw insertion angle configurations were designed using a matrix system for screw angulation. The locking plate models were evaluated in a two-part proximal humerus fracture with surgical neck fracture under bending and compressive loading conditions using FEA and statistically analyzed using a design of experiments (DOE). The optimal screw insertion angle setting showed an improvement in relation to the interfragmentary strain value of the fracture. Moreover, calcar screws were the most significant feature in fracture stability throughout the tests, followed by the divergence of the most proximal screws and the proximal–distal alignment of the locking plate.

Extended Intraoperative Longitudinal 3-Dimensional Cone Beam Computed Tomography Imaging With a Continuous Multi-Turn Reverse Helical Scan.

Cone beam computed tomography (CBCT) imaging is becoming an indispensable intraoperative tool; however, the current field of view prevents visualization of long anatomical sites, limiting clinical utility. Here, we demonstrate the longitudinal extension of the intraoperative CBCT field of view using a multi-turn reverse helical scan and assess potential clinical utility in interventional procedures. A fixed-room robotic CBCT imaging system, with additional real-time control, was used to implement a multi-turn reverse helical scan. The scan consists of C-arm rotation, through a series of clockwise and anticlockwise rotations, combined with simultaneous programmed table translation. The motion properties and geometric accuracy of the multi-turn reverse helical imaging trajectory were examined using a simple geometric phantom. To assess potential clinical utility, a pedicle screw posterior fixation procedure in the thoracic spine from T1 to T12 was performed on an ovine cadaver. The multi-turn reverse helical scan was used to provide postoperative assessment of the screw insertion via cortical breach grading and mean screw angle error measurements (axial and sagittal) from 2 observers. For all screw angle measurements, the intraclass correlation coefficient was calculated to determine observer reliability. The multi-turn reverse helical scans took 100 seconds to complete and increased the longitudinal coverage by 370% from 17 cm to 80 cm. Geometric accuracy was examined by comparing the measured to actual dimensions (0.2 ± 0.1 mm) and angles (0.2 ± 0.1 degrees) of a simple geometric phantom, indicating that the multi-turn reverse helical scan provided submillimeter and degree accuracy with no distortion. During the pedicle screw procedure in an ovine cadaver, the multi-turn reverse helical scan identified 4 cortical breaches, confirmed via the postoperative CT scan. Directly comparing the screw insertion angles (n = 22) measured in the postoperative multi-turn reverse helical and CT scans revealed an average difference of 3.3 ± 2.6 degrees in axial angle and 1.9 ± 1.5 degrees in the sagittal angle from 2 expert observers. The intraclass correlation coefficient was above 0.900 for all measurements (axial and sagittal) across all scan types (conventional CT, multi-turn reverse helical, and conventional CBCT), indicating excellent reliability between observers. Extended longitudinal field-of-view intraoperative 3-dimensional imaging with a multi-turn reverse helical scan is feasible on a clinical robotic CBCT imaging system, enabling long anatomical sites to be visualized in a single image, including in the presence of metal hardware.

Morphometric Analysis of Odontoid in Nepalese Individuals of Eastern Nepal

IntroductionThere is ethnic variation in the morphometry of odontoid and it is always mandatory to know the anatomy of odontoid before surgery to achieve the success of the surgery either with 1 or 2 screws fixation. There is no literature on the morphometry of odontoids in the Nepalese population. MethodsTwo hundred and ten consecutive patients whose CT-scan of the head or cervical spine were done without any evidence of cervical injury or fracture were included in the study. Morphometric measurements were done using Horos software in axial, coronal, and sagittal planes. ResultsThe mean age was 42.32 ± 16.16 (range 17-76) years including 104 males and 106 females. The mean screw length was 36.52 ± 3.14 mm and the screw insertion angle in relation to the inferior endplate of C2 vertebrae is 55.66 ± 4.74 degrees. The anteroposterior diameter of the odontoid was significantly more than the transverse diameter at the base and at the waist of the odontoid. A total of 97 (46.1%) individuals had their transverse waist diameter between 7.4 -9 mm and 31 (14.76%)had their dimension below 7.4 mm. ConclusionsAlmost 2/3rd of the Nepalese population has an inadequate diameter of odontoid for two 3.5 mm screws since the transverse waist diameter is less than 9 mm. Hence, either two 2.7 mm screws or a single 4.5 mm screw fixation should be considered in the majority of the cases but only after preoperative CT-scan-based morphometric measurement.

Efficiency of Long Lateral Mass Screws.

Introduction: Lateral mass screws (LMS) have been widely used for the posterior fusion of the cervical spine. Even though LMS are safe, the screws are short and postoperative fixation is uncertain. Therefore, we measured and reported a technique using long lateral mass screws (LLMS), a new method of screw insertion, using a Zed spine from LEXI (Tokyo, Japan). Materials and Methods: In this study, we evaluated the outcomes of 35 patients who underwent surgery using LLMS at our hospital from 2019 to 2021. Operative time, blood loss, complications, inserted screw length, screw length based on gender differences, and screw deviation rate were evaluated. The Mann–Whitney U test was used to determine the gender differences in screw length. Screw deviation was evaluated by postoperative CT and a Zed spine to determine the screw insertion angle. Results: The mean operative time was 185 ± 51 min (120–327 min), and the mean blood loss was 236 ± 316 g (10–1720 g). The total number of screws was 183. The screw length was 22.2 (16–28) mm for males and 20.8 (16–28) mm for females, with an average length of 21 ± 2.7 mm. No gender differences were observed in terms of screw length (p > 0.01 NS). The number of deviated screws above G3 was one in the third cervical vertebra, three in the fourth cervical vertebra, one in the fifth cervical vertebra, and one in the sixth cervical vertebra. The number of deviated screws was 6 out of 183, and the deviation rate was 3.2%. Conclusions: In this study, the LLMS deviation rate was 3.2%, and strong fixation was possible without any complications. We measured the screw length and screw deviation rate in cases in which LLMS were actually inserted.

Optimal screw positioning in cervical pedicles to avoid complications.

Cervical instability can be caused by a variety of factors, including trauma, tumors, or infection. The cervical transpedicular screw (CPS) is one of the most modern procedures for treating cervical instability. Despite the fact that numerous innovative techniques for CPS have been proposed, the appropriate screw entry points and screw directions have yet to be thoroughly established. The aim of this study is to determine the screw insertion angles and screw entry point distances based on reference points, pedicle axis lengths, and pedicle axis intersections for each vertebra from cervical (C) C2 to C7 in both right and left by gender and age groups. In this study, computed tomography (CT) images of patients who underwent cervical examination for any reason were evaluated retrospectively. A total of 100 patients (59 men and 41 females), ranging in age from 18 to 79 years (mean 43 years), were randomly selected for the study. Patients with a history of cervical pathology or surgery were excluded. CT images turned into 3D reconstructed images and density settings were made so that bone tissue could be best observed using OsiriX software. Pedicle axis length (PAL), pedicle transverse angle (PTA), pedicle sagittal angle (PSA), distance of screw entry point to lateral notch (DLN), distance of screw entry point to inferior articular process (DIAP), and pedicle axis intersections were measured. According to our findings, the optimal entry point should be 2-4 mm medial to the lateral notch and 8-12 mm superior to inferior articular process. PTA ranges between 30 to 45°, while PSA ranges between 11 to 15°. Except for the C2 pedicles, which were slightly shorter, the pedicle axis lengths (PAL) were similar from C3 to C7 in the total group. The intersection of the right and left pedicle axes was determined to be the most in C4 (51.21% in females and 72.88% in males). This study has shown that intersections of the pedicle axis must be considered in both genders, especially in C4. Standardizing optimal entry points and trajectories is crucial for improving the CPS technique's safety and effectiveness.