Screen-printed Carbon Sensors Research Articles

A new screen-printed carbon sensor decorated gold nanoparticles/kaolinite mineral: electrochemical analysis of propyphenazone and the investigation of ds-DNA interaction

A new screen-printed carbon sensor decorated gold nanoparticles/kaolinite mineral: electrochemical analysis of propyphenazone and the investigation of ds-DNA interaction

Synthesis and Applications of Crown Ether-Linked Metal–Organic Framework Composite-Based Sensors for Stripping Voltammetric Determination of Lead

The present work demonstrates the construction and electrochemical characterization of novel disposable screen-printed carbon sensors integrated with functionalized MIL-53-NH2 metal–organic framework cross-linked with crown ethers and calixarene macrocyclic compounds for sensitive differential pulse voltammetric determination of lead ions in tap, surface water and biological fluid samples. The electroanalytical parameters were optimized regarding the nature of the electrode modifier, supporting electrolyte, the working pH value, scan rate, deposition potential, deposition time, reproducibility of measurement and the operational lifetime. Working electrodes dropcasted with MIL-53-NH2-dibenzo-24-crown-8-ether nanocomposite (MOFCE24) showed the proper performance within the lead concentration ranging from 13.75 to 217.83 ppb with LOD and LOQ values of 3.18 and 9.62 ppb, respectively. The synergistic effect of the metal–organic frameworks as transducer and dibenzo 24-crown-8-ether as sensing elements accelerates the electron transfer process at the electrode surface and improves the sensor selectivity through complexation of the lead ions with the crown ether moiety. The fabricated sensors showed high measuring reproducibility with long operational life time (60 days), which can be attributed to the formation of cross-linked ionophore/metal–organic framework with limited leaching of the sensing element in the measuring solution. The introduced sensors were utilized for the onsite voltammetric determination of lead in environmental and biological samples with acceptable average recoveries comparable with the graphite furnace atomic absorption spectrometric method.

A nanoporous screen-printed carbon sensor for environmental and clinical monitoring of the antibiotic ciprofloxacin

A very sensitive, fast and simple electrochemical procedure using a nanoporous screen-printed carbon electrode (NPSPCE) was developed for the determination of the fluoroquinolone antibiotic ciprofloxacin (CFX). Changes in the surface morphology and electrochemical properties of the SPCE before and after pre-anodization were examined using scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). CV studies also demonstrated unequivocally adsorption controlled and irreversible oxidation of CFX. Using optimized conditions, the developed procedure is characterized by excellent selectivity and high sensitivity, allowing to achieve a very low limit detection (6.3 × 10−11 mol/L). The measurements taken allow us to consider the NPSPCE as a very effective tool for direct determination of CFX in samples with a complex matrix such as sewage and body fluids. The developed environment friendly sensor and procedure meet the requirements of green chemistry (reduction of toxic chemicals/reagents, and generation of minimal waste).

Sensitive and Selective Voltammetric Sensor Based on Anionic Surfactant-Modified Screen-Printed Carbon for the Quantitative Analysis of an Anticancer Active Fused Azaisocytosine-Containing Congener

3-(4-Nitrophenyl)-8-(2,3-dimethylphenyl)-7,8-dihydroimidazo[2,1-c][1,2,4]triazin-4(6H)-one (NDIT) is one of the most promising candidates for anticancer agents. Hence, a sensitive and selective sodium dodecyl sulfate-modified screen-printed carbon sensor (SPCE/SDS) was used for its quantitative analysis. The SPCE/SDS, in contrast to the SPCE, showed excellent behavior in the electrochemical reduction of NDIT by differential-pulse adsorptive stripping voltammetry (DPAdSV). Cyclic voltammetric (CV) studies reveal an irreversible, two-stage and not purely diffusion-controlled reduction process in 0.01 M HNO3. The sensor was characterized by CV and electrochemical impedance spectroscopy (EIS). Under the optimized conditions (t 45 s, ΔE 175 mV, ν 150 mV/s, and tm 5 ms), the DPAdSV procedure with the SPCE/SDS presented a very wide linear range from 1 to 2000 nM and a low detection limit of 0.29 nM. A 1000-fold excess concentration of potential interferents commonly present in biological samples did not significantly alter the peak current of NDIT. The practical application of the proposed DPAdSV procedure with the SPCE/SDS was successfully checked by analyzing spiked human serum samples.

Voltammetric Quantification of Anti-Cancer Antibiotic Bleomycin Using an Electrochemically Pretreated and Decorated with Lead Nanoparticles Screen-Printed Sensor.

In this paper, we report a highly sensitive voltammetric sensor for the determination of the anti-cancer antibiotic bleomycin (BLM) based on a screen-printed carbon sensor that is electrochemically pretreated and decorated with lead nanoparticles in the sample solution (pSPCE/PbNPs). These sensor surface manipulations contribute to significant amplification of the analytical signal and improvement of its shape and repeatability. The effect of the electrochemical behavior of BLM on the pSPCE/PbNPs was examined by electrochemical strategies. CV, EIS, and XPS were used to compare the sensor surface modifications. The effects of the type and pH of the supporting electrolyte and the procedure parameters were optimized. The features of the proposed procedure include: (a) very low limits of detection and quantification (2.8 × 10-11 and 9.3 × 10-11 M, respectively), (b) linear ranges (1.0 × 10-10-2.0 × 10-9 M and 2.0 × 10-9-2.0 × 10-8 M, and (c) a high sensitivity of 0.32 µA/nM. The electrochemical sensor was successfully applied for the determination of BLM in wastewater and reference material of human urine samples.

Immunoarray Measurements of Parathyroid Hormone-Related Peptides Combined with Other Biomarkers to Diagnose Aggressive Prostate Cancer.

Parathyroid hormone-related peptide (PTHrP) is related to bone metastasis and hypercalcemia in prostate and breast cancers and should be an excellent biomarker for aggressive forms of these cancers. Current clinical detection protocols for PTHrP are immunoradiometric assay and radioimmunoassay but are not sensitive enough to detect PTHrPs at early stages. We recently evaluated a prostate cancer biomarker panel, including serum monocyte differentiation antigen (CD-14), ETS-related gene protein, pigment epithelial-derived factor, and insulin-like growth factor-1, with promise for identifying aggressive prostate cancers. This panel predicted the need for patient biopsy better than PSA alone. In the present paper, we report an ultrasensitive microfluidic assay for PTHrPs and evaluate their diagnostic value and the value of including them with our prior biomarker panel to diagnose aggressive forms of prostate cancer. The immunoarray features screen-printed carbon sensor electrodes coated with 5 nm glutathione gold nanoparticles with capture antibodies attached. PTHrPs are bound to a secondary antibody attached to a polyhorseradish peroxidase label and delivered to the sensors to provide high sensitivity when activated by H2O2 and a mediator. We obtained an unprecedented 0.3 fg mL-1 limit of detection for PTHrP bioactive moieties PTHrP 1-173 and PTHrP 1-86. We also report the first study of PTHrPs in a large serum pool to identify aggressive malignancies. In assays of 130 human patient serum samples, PTHrP levels distinguished between aggressive and indolent prostate cancers with 83-91% clinical sensitivity and 78-96% specificity. Logistic regression identified the best predictive model as a combination of PTHrP 1-86 and vascular endothelial growth factor-D. PTHrP 1-173 alone also showed a high ability to differentiate aggressive and indolent cancers.

Electrochemically Pretreated Sensor Based on Screen-Printed Carbon Modified with Pb Nanoparticles for Determination of Testosterone.

Testosterone (TST), despite its good properties, may be harmful to the human organism and the environment. Therefore, monitoring biological fluids and environmental samples is important. An electrochemically pretreated screen-printed carbon sensor modified with Pb nanoparticles (pSPCE/PbNPs) was successfully prepared and used for the determination of TST. The surface morphology and electrochemical properties of unmodified and modified sensors were characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), scanning and transmission electron microscopy (SEM and TEM), and energy-dispersive X-ray spectroscopy (EDS). Selective determinations of TST at the pSPCE/PbNPs were carried out by differential pulse adsorptive stripping voltammetry (DPAdSV, EPb dep.and TST acc. of −1.1 V, t Pb dep.and TST acc. of 120 s, ΔEA of 50 mV, ν of 175 mV s−1, and tm of 5 ms) in a solution containing 0.075 mol L−1 acetate buffer of pH = 4.6 ± 0.1, and 7.5 × 10−5 mol L−1 Pb(NO3)2. The analytical signal obtained at the potential around −1.42 V (vs. silver pseudo-reference electrode) is related to the reduction process of TST adsorbed onto the electrode surface. The use of pSPCE/PbNPs allows obtaining a very low limit of TST detection (2.2 × 10−12 mol L−1) and wide linear ranges of the calibration graph (1.0 × 10−11–1.0 × 10−10, 1.0 × 10−10–2.0 × 10−9, and 2.0 × 10−9–2.0 × 10−8 mol L−1). The pSPCE/PbNPs were successfully applied for the determination of TST in reference material of human urine and wastewater purified in a sewage treatment plant without preliminary preparation.

Voltammetric Determination of Levodopa Using Mesoporous Carbon-Modified Screen-Printed Carbon Sensors.

Levodopa is a precursor of dopamine, having important beneficial effects in the treatment of Parkinson’s disease. In this study, levodopa was accurately detected by means of cyclic voltammetry using carbon-based (C-SPCE), mesoporous carbon (MC-SPCE) and ordered mesoporous carbon (OMC-SPCE)-modified screen-printed sensors. Screen-printed carbon sensors were initially used for the electrochemical detection of levodopa in a 10−3 M solution at pH 7.0. The mesoporous carbon with an organized structure led to better electroanalysis results and to lower detection and quantification limits of the OMC-SPCE sensor as compared to the other two studied sensors. The range of linearity obtained and the low values of the detection (0.290 µM) and quantification (0.966 µM) limit demonstrate the high sensitivity and accuracy of the method for the determination of levodopa in real samples. Therefore, levodopa was detected by means of OMC-SPCE in three dietary supplements produced by different manufacturers and having various concentrations of the active compound, levodopa. The results obtained by cyclic voltammetry were compared with those obtained by using the FTIR method and no significant differences were observed. OMC-SPCE proved to be stable, and the electrochemical responses did not vary by more than 3% in repeated immersions in a solution with the same concentration of levodopa. In addition, the interfering compounds did not significantly influence the peaks related to the presence of levodopa in the solution to be analyzed.

Electrochemically Activated Screen-Printed Carbon Sensor Modified with Anionic Surfactant (aSPCE/SDS) for Simultaneous Determination of Paracetamol, Diclofenac and Tramadol.

In this work, an electrochemically activated screen-printed carbon electrode modified with sodium dodecyl sulfate (aSPCE/SDS) was proposed for the simultaneous determination of paracetamol (PA), diclofenac (DF), and tramadol (TR). Changes of surface morphology and electrochemical behaviour of the electrode after the electrochemical activation with H2O2 and SDS surface modification were studied by scanning electron microscopy (SEM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The influence of various parameters on the responses of the aSPCE/SDS such as pH and concentration of the buffer, SDS concentration, and techniques parameters were investigated. Using optimised conditions (Eacc. of −0.4 V, tacc. of 120 s, ΔEA of 150 mV, ν of 250 mV s−1, and tm of 10 ms), the aSPCE/SDS showed a good linear response in the concentration ranges of 5.0 × 10−8–2.0 × 10−5 for PA, 1.0 × 10−9–2.0 × 10−7 for DF, and 1.0 × 10−8–2.0 × 10−7 and 2.0 × 10−7–2.0 × 10−6 mol L−1 for TR. The limits of detection obtained during the simultaneous determination of PA, DF, and TR are 1.49 × 10−8 mol L−1, 2.10 × 10−10 mol L−1, and 1.71 × 10−9 mol L−1, respectively. The selectivity of the aSPCE/SDS was evaluated by examination of the impact of some inorganic and organic substances that are commonly present in environmental and biological samples on the responses of PA, DF, and TR. Finally, the differential pulse adsorptive stripping voltammetric (DPAdSV) procedure using the aSPCE/SDS was successfully applied for the determination of PA, DF, and TR in river water and serum samples as well as pharmaceuticals.

New Screen-Printed Carbon Sensor for Trace Analysis of Thallium(I)

Thallium is an element classified as a heavy metal. In chemical compounds it occurs on +1 and +3 oxidation levels. In the context of the toxicity of this element, Tl(I) is most often referred to. The similarity of Tl+ ions to K+ ions is the basis of the mechanism of toxic action of Tl(I) on the human body. The main features of thallium poisoning in humans are gastroenteritis, polyneuropathy and alopecia Thallium in the environment comes from both natural and anthropogenic sources. Due to the high toxicity of thallium and its easy absorption by the human and animal organisms, it is extremely important to monitor the amount of this element, including in water. The purpose of this work is to present a new method for determination of thallium in water samples using a screen-printed sensor with carbon working electrode modified with multiwalled carbon nanotubes and in-situ plated bismuth film. The measurements were carried out using square wave anodic stripping voltammetry (SWASV) method. Simultaneous deposition of bismuth and thallium took place at a potential of -0.9 V for 180 s. Under optimized conditions a linear calibration curve was obtained in the range of Tl(I) concentrations from 1·10-8 to 1·10-6 mol L-1. The procedure allows to achieve the limits of detection and quantification of Tl(I), 2.8 × 10-9 and 9.3 × 10-9 mol L-1 respectively. The method was applied for determination of Tl(I) in spiked water samples from Vistula river. [1] Kozak, J., Tyszczuk-Rotko, K., Rotko, M. Physicochemical Problems of Mineral Processing 2019 , 55(6), 1422-1428.

A Screen-Printed Sensor Coupled with Flow System for Quantitative Determination of a Novel Promising Anticancer Agent Candidate.

A carbon nanofibers modified screen-printed carbon sensor (SPCE/CNFs) was applied for the determination of a novel promising anticancer agent candidate (ethyl 8-(4-methoxyphenyl)-4-oxo-4,6,7,8-tetrahydroimidazo[2,1-c][1,2,4]triazine-3-carboxylate, EIMTC) using square-wave voltammetry (SWV). It is the first method for the quantitative determination of EIMTC. The modified screen-printed sensor exhibited excellent electrochemical activity in reducing EIMTC. The peak current of EIMTC was found to be linear in two concentration ranges of 2.0 × 10−9 – 2.0 × 10−8 mol L−1 and 2.0 × 10−8 – 2.0 × 10−7 mol L−1, with a detection limit of 5.0 × 10−10 mol L−1. The connection of flow-cell for the SPCE/CNFs with SWV detection allowed for the successful determination of EIMTC in human serum samples. Ultra-high-performance liquid chromatography coupled to electrospray ionization triple quadrupole mass spectrometry (UHPLC-ESI-MS/MS) acted as a comparative method in the serum samples analysis.

Voltammetric screen-printed carbon sensor modified with multiwalled carbon nanotubes and bismuth film for trace analysis of thallium(I)

Voltammetric screen-printed carbon sensor modified with multiwalled carbon nanotubes and bismuth film for trace analysis of thallium(I)

Electrochemical detection of 8-hydroxyguanine using screen-printed carbon electrodes modified with carboxy-functionalized multi-walled carbon nanotubes

The paper presents the findings of an optimization and validation results of electrochemical detection of 8-hydroxyguanine, a major marker of oxidative stress, using disposable screen-printed carbon electrode (SPCE) modified with carboxy-functionalized multi-walled carbon nanotubes (MWCNTs-COOH). Several types of bare and modified SPCEs were tested and modification with MWCNTs-COOH was found superior in terms of measured current response, level of background currents, and sensitivity in oxidation of 8-hydroxyguanine. The effect of pH and composition of supporting electrolyte on current response and peak potential were also evaluated. Validation parameters were calculated for optimum pH 7 of 0.01 mol dm−3 phosphate buffer. The sensor showed the highest sensitivity of 0.0625 µA dm3 μmol−1 within the linear range 0.3–12 μmol dm−3 with a limit of detection as low as 0.57 μmol dm−3. Extended linear range 0.3–240 μmol dm−3 is feasible with a sensitivity of 0.0523 µA dm3 μmol−1. Intra-day and inter-day assays within 3 days were performed to verify the repeatability of modified screen-printed carbon sensors. Finally, the sensor was utilized for electrochemical monitoring of stability of 8-hydroxyguanine when stored in room temperature, in the refrigerator, or frozen and thawed.

Electrochemical strategies for gallic acid detection: Potential for application in clinical, food or environmental analyses

Polyphenols are important to human health thus making it interesting and necessary to identify and assess methods for their detection. Gallic acid (GA) is a well-known antioxidant compound, found in tea leaves, various fruits, fruit seeds and in fruit-derived foods and beverages. In this study, to electrochemically detect this compound and assess the potential for GA detection, different analytical conditions at pH values of 5.8, 7 and 8 were tried. Two types of device were used for GA detection: (1) Lazar ORP-146C reduction-oxidation microsensors, coupled with a Jenco device, for estimation of antioxidant capacities of different electroactive media, and (2) screen-printed carbon sensors coupled with a mobile PalmSens device using differential pulse voltammetry (qualitative and quantitative GA determination). These proposed methods were validated by analysing some real samples: wine, green tea, apple juice and serum fortified with GA. Detection was evaluated in terms of specific calibration curves, with low limit of detection (LOD) and limit of quantification (LOQ), low response time, and high sensitivities. The analytical characteristics obtained recommend these methods to be tested on more other types of real samples. Our proposed methods, used in the established conditions of pH, may have further application in other clinical, food or environmental samples analyses in which the results of total antioxidants contents are usually expressed in GA equivalents.

A novel electroanalytical approach to the measurement of B vitamins in food supplements based on screen-printed carbon sensors

This paper describes the development of a novel electrochemical assay for the measurement of water-soluble vitamins in food and pharmaceutical products. The optimum conditions for the determination of vitamin B1 (thiamine), B2 (riboflavin) and B6 (pyridoxine) in phosphate buffer were established using cyclic voltammetry in conjunction with screen printed carbon electrodes (SPCEs). The optimum current response for all three vitamins was achieved in 0.1M phosphate buffer pH 11 using an initial potential of −1.0V. Using square wave voltammetry, the linear ranges for thiamine, riboflavin, and pyridoxine were found to be: 15–110µg/ml, 0.1–20µg/ml, and 2–80µg/ml respectively. The application of the method to a commercial food product yielded a recovery of 95.78% for riboflavin, with a coefficient of variation (CV) of 3.38% (n = 5). The method was also applied to a multi-vitamin supplement for the simultaneous determination of thiamine, riboflavin and pyridoxine. In both cases only simple dilution with buffer followed by centrifugation was required prior to analysis. The resulting square wave voltammetric signals were completely resolved with Ep values of −0.7V, +0.2V, and +0.6V respectively. The recoveries determined for the vitamin B complex in a commercial supplement product were found to be 110%, 114%, and 112% respectively (CV = 7.14%, 6.28%. 5.66% respectively, n = 5).

Fe3O4 nanoparticles on graphene oxide sheets for isolation and ultrasensitive amperometric detection of cancer biomarker proteins

Ultrasensitive mediator-free electrochemical detection for biomarker proteins was achieved at low cost using a novel composite of Fe3O4 nanoparticles loaded onto graphene oxide (GO) nano-sheets (Fe3O4@GO). This paramagnetic Fe3O4@GO composite (1µm size range) was decorated with antibodies against prostate specific antigen (PSA) and prostate specific membrane antigen (PSMA), and then used to first capture these biomarkers and then deliver them to an 8-sensor detection chamber of a microfluidic immunoarray. Screen-printed carbon sensors coated with electrochemically reduced graphene oxide (ERGO) and a second set of antibodies selectively capture the biomarker-laden Fe3O4@GO particles, which subsequently catalyze hydrogen peroxide reduction to detect PSA and PSMA. Accuracy was confirmed by good correlation between patient serum assays and enzyme-linked immuno-sorbent assays (ELISA). Excellent detection limits (LOD) of 15 fg/mL for PSA and 4.8 fg/mL for PSMA were achieved in serum. The LOD for PSA was 1000-fold better than the only previous report of PSA detection using Fe3O4. Dynamic ranges were easily tunable for concentration ranges encountered in serum samples by adjusting the Fe3O4@GO Concentration. Reagent cost was only $0.85 for a single 2-protein assay.

Graphene/conducting polymer nano-composite loaded screen printed carbon sensor for simultaneous determination of dopamine and 5-hydroxytryptamine

A novel and sensitive electrochemical method has been developed for the simultaneous determination of dopamine (DA) and 5-hydroxytryptamine (5-HT) using graphene (GR) and poly 4-amino-3-hydroxy-1-naphthalenesulfonic acid modified screen printed carbon sensor. The electrochemical measurements were studied using cyclic voltammetry, square wave voltammetry, whereas the surface morphology of the modified sensor was characterized by Electrochemical Impedance Spectroscopy and Field Emission scanning electron microscopy. The fabricated sensor facilitated the analysis of DA and 5-HT in the concentration range 0.05–100μM and 0.05–150μM with the detection limit of 2nM and 3nM respectively. The fabricated sensor has been explored for the determination of 5-HT in the plasma samples and the selectivity of the proposed work has been proved by the analysis of DA and 5-HT in the presence of common metabolites present in biological fluids. The analytical applicability of the fabricated sensor has also been successfully demonstrated for the simultaneous detection of DA and 5-HT in the pharmacological formulations, human urine and blood samples.

Development of a voltammetric assay, using screen-printed electrodes, for clonazepam and its application to beverage and serum samples

This paper describes the development of an electrochemical assay based on screen-printed carbon sensors for the determination of clonazepam in serum and in wine. The cyclic voltammetric behaviour of the drug was investigated and the effects of pH and scan rate on the peak current and peak potential determined. Two reduction peaks were recorded on the initial negative going scan, which were considered to result from the 2e–, 2 H+ reduction of the 4,5-azomethine and from the 4e–, 4 H+ reduction of the 7-NO2 to a hydroxylamine. On the return positive going scan an oxidation peak was seen, which was considered to result from the 2e–, 2 H+ oxidation (O1) of the hydroxylamine to the corresponding nitroso species. At pH 11 the solution of clonazepam was found to turn from clear to yellow in colour and the voltammetric signal of the O1 oxidation process was found to be adsorptive in nature, this was exploited in the development of an adsorptive stripping voltammetric assay. Experimental conditions were then optimised for the differential pulse adsorptive voltammetric measurement of clonazepam in wine and serum samples. It was shown that these analyses could be performed on only 100µL of sample which was deposited on the sensor surface. Mean recoveries of 79.53% (%CV=9.88%) and 88.22% (%CV=14.1%) were calculated for wine fortified with 3.16µg/mL and serum fortified with 12.6µg/mL.

3D-printed supercapacitor-powered electrochemiluminescent protein immunoarray.

Herein we report a low cost, sensitive, supercapacitor-powered electrochemiluminescent (ECL) protein immunoarray fabricated by an inexpensive 3-dimensional (3D) printer. The immunosensor detects three cancer biomarker proteins in serum within 35 min. The 3D-printed device employs hand screen printed carbon sensors with gravity flow for sample/reagent delivery and washing. Prostate cancer biomarker proteins, prostate specific antigen (PSA), prostate specific membrane antigen (PSMA) and platelet factor-4 (PF-4) in serum were captured on the antibody-coated carbon sensors followed by delivery of detection-antibody-coated Ru(bpy)3(2+) (RuBPY)-doped silica nanoparticles in a sandwich immunoassay. ECL light was initiated from RuBPY in the silica nanoparticles by electrochemical oxidation with tripropylamine (TPrA) co-reactant using supercapacitor power and ECL was captured with a CCD camera. The supercapacitor was rapidly photo-recharged between assays using an inexpensive solar cell. Detection limits were 300-500f gmL(-1) for the 3 proteins in undiluted calf serum. Assays of 6 prostate cancer patient serum samples gave good correlation with conventional single protein ELISAs. This technology could provide sensitive onsite cancer diagnostic tests in resource-limited settings with the need for only moderate-level training.

Simultaneous analysis of dopamine and 5-hydroxyindoleacetic acid at nanogold modified screen printed carbon electrodes

A convenient, low cost, and sensitive electrochemical method, based on a disposable gold nanoparticles modified screen printed carbon sensor (AuNPs/SPCs), is described for the simultaneous determination of dopamine (DA) and 5-hydroxyindole acetic acid (5-HIAA). The presence of the excess of ascorbic acid and uric acid did not interfere in the determination. Field emission scanning electron microscopy (FE-SEM) and electrochemical impedance spectroscopy (EIS) were used to characterize the surface morphology of the AuNPs modified SPCs. The modified electrode exhibited good electrocatalytic properties toward the oxidation of DA and 5-HIAA. A peak potential difference of 230mV between DA and HIAA was large enough to determine DA and 5-HIAA individually and simultaneously. The anodic peak currents of DA and 5-HIAA were found to be linear in the concentration range of 0.2–100μM and 0.5–200μM with the detection limit of 8nM and 22nM, respectively. The analytical utility of method was checked by determining the DA in various pharmacological dosage forms. The utility of AuNPs/SPCs was also demonstrated successfully for the simultaneous determination of DA and 5-HIAA in human plasma and urine samples.