Scots Pine Trees Research Articles

Properties of ions may explain elemental stoichiometry in late- and early-wood: a case study in Scots pine tree rings

Properties of ions may explain elemental stoichiometry in late- and early-wood: a case study in Scots pine tree rings

Mobile laser scanning as reference for estimation of stem attributes from airborne laser scanning

The acquisition of high-quality reference data is essential for effectively modelling forest attributes. Incorporating close-range Light Detection and Ranging (LiDAR) systems into the reference data collection stage of remote sensing-based forest inventories can not only increase data collection efficiency but also increase the number of attributes measured with high quality. Therefore, we propose a model-based forest inventory method that uses reference data collected by a car-mounted mobile laser scanning (MLS) system along boreal forest roads. This approach is used for the estimation of diameter at breast height (DBH) and stem volume at the individual tree-level from airborne laser scanning (ALS) data. In addition, we compare the estimates obtained using the proposed method with the ones derived from reference data collected by traditional field inventory of 265 field plots systematically distributed over the study area. The accuracy of the estimates remained comparable regardless of the reference dataset used for estimation of DBH and stem volume. When using the field inventory dataset for model training, the root mean square error (RMSE) of DBH estimates were 4.06 cm (18.8 %) for Norway spruce trees, 6.3 cm (29.6 %) for Scots pine and 8.61 cm (55.9 %) for deciduous trees. Similarly, when evaluating predictions based on the MLS dataset as reference, RMSEs were equal to 3.97 cm (18.4 %) for Norway spruce, 6.12 cm (28.8 %) for Scots pine, and 8.98 cm (58.3 %) for deciduous trees. In general, biases were below 1 cm for most species classes, with the exception of deciduous trees. The accuracy of stem volume also had RMSEs varying across different tree species. For the estimates based on traditional field inventory, the RMSEs were 0.176 m3 (38.8 %) for Norway spruce, 0.228 m3 (52.4 %) for Scots pine and 0.246 m3 (158 %) for deciduous trees. When using the MLS dataset as a reference, the RMSEs were equal to 0.176 m3 (38.8 %), 0.228 m3 (52.4 %), and 0.246 m3 (158 %) for Norway spruce, Scots pine, and deciduous trees, respectively. Car-mounted MLS demonstrated its potential as an efficient alternative for collecting reference data in remote sensing-based forest inventories, which could complement traditional methods.

Bark Thickness of Forest-forming Species: Modeling and Comparative Analysis

The need to assess the carbon-depositing capacity of a stand, an individual tree and its components is constantly emphasized in the world literature, since mitigation of the effects of climate change has become the highest priority. Since the carbon concentration differs in different tree species and in different components of the tree, including in the stem wood and bark, it is necessary to develop species-specific mathematical models for estimating the proportion of bark in trunks to improve the accuracy of knowledge about the carbon balance of forests. The relationship of bark thickness with both age and diameter of the tree trunk is known, but with respect to its regional variability, the data are contradictory. According to the actual data from 1100 model trees of five forest-forming species, allometric models of a mixed type have been developed. They include as independent variables the age and diameter of the trunk, as well as a binary variable characterising the influence of the growing area itself on the bark thickness of Scots pine, silver birch and Siberian larch, as well as the difference in the thickness of the bark between Siberian spruce and Siberian fir in case of joint growth in mature stands of the taiga zone. At a statistically significant level, it was found that the bark thickness of Scots pine and silver birch trees in the steppe zone is significantly greater compared to the taiga zone, and the bark thickness of Siberian larch trees in the forest-tundra is significantly greater compared to the steppe zone. The bark thickness of Siberian spruce trees is significantly less than that of Siberian fir trees. The ranking of species by bark thickness is included in the paper.

Veteranising Scots pine trees by initiating tree hollowing: Inoculation with the fungal keystone species Porodaedalia pini

Hollow trees are crucial for forest biodiversity but are becoming increasingly rare in many ecosystems, including the Scots pine forests of northern Europe. Here, we inoculated heartwood of live Scots pine trees with the fungal keystone species Porodaedalia pini to initiate tree hollowing. The fungus was inoculated in 50-, 110- and 170-year old stands, using wood dowels containing mycelia. Three different strains were used to test for intraspecific variation. Molecular analysis of samples from inoculated trees seven years after treatment showed that 67% were successfully colonised, with no differences between stands. Fungal strain had no effect on colonisation success. Our findings suggest that inoculation with P. pini has the potential to be an efficient method to restore a key ecological process, tree hollowing, in degraded Scots pine forests. The possibility of initiating the process even in young trees may be a way to accelerate the formation of hollow pines in younger forests.

Estimation of phloem conductance at tree level in young, middle-aged and old-aged Scots pine trees growing in different climatic conditions in boreal forests.

In forests, a significant proportion of the carbon fixed by trees during photosynthesis is transported belowground along the conducting phloem, so variations in phloem anatomy can lead to variations in transport capacity. Phloem conductance at tree level (Ktree) is also affected by tree height. Both the phloem anatomy and the tree size change during ontogeny, and also differ under different environmental conditions. The goal of our work was to identify the main drivers of variation in Ktree in Scots pine trees growing in natural boreal forests. We conducted a phloem anatomical study and calculated Ktree in trees of three age groups growing in different climatic conditions along a latitudinal gradient from south to north. We found that Ktree was maintained at the same level in actively growing pine trees (25-80-years-old) but increased in old-aged trees (180-190-years-old), possibly reflecting the shift in source-sink relationships of aboveground and belowground parts of trees. Trees of the same age group growing in different climatic conditions demonstrated similar values of Ktree due to coordinated changes in the phloem anatomy and the tree height. In general, the negative influence of tree height on Ktree is offset by the positive influence of phloem width (or trunk diameter) and sieve cell diameter. The exception was young trees growing in the transition zone of the northern taiga subzone to the tundra, where Ktree was the highest in its age group and even exceeded Ktree of middle-aged trees.

Sap Flow Density of the Prevailing Tree Species in a Hemiboreal Forest under Contrasting Meteorological and Growing Conditions

This study aimed to assess the adaptive capacity of the dominant tree species in Lithuania, namely Scots pine, Norway spruce, and silver birch, to current climate conditions based on their changes in transpiration expressed through the tree sap flow intensity. The species-specific responses were investigated at two typical edaphically different forest sites with water-limited and water-saturated soils. Contrasting events like overflow in 2017 and drought in 2019 provided an opportunity to detect the adaptative capacity of the monitored tree species to these meteorological extremes. Norway spruce trees, due to having both the most intense sap flow at the beginning of the growing season and the longest period of active transpiration, demonstrated the highest annual transpiration rate, regardless of the hydrological regime of the site. Their decreased resilience to subsequent biogenic damage caused by pests due to a significant decrease in sap flow density during intense and prolonged droughts may reduce their importance in Lithuanian forestry. Silver birch trees, which demonstrated a reduction in sap flow after a drought following the untimely drop of their leaves and the end of active vegetation, even at the end of a prolonged warm period, can be seen to not have appropriate adaptations to current climate conditions. Scots pine trees are the best adapted to mitigating the recent threats of climate change.

THE REMEDIATION METHOD AS A FACTOR SHAPING THE PIGMENT PROFILE OF SCOTS PINE ON TECHNOGENIC LAND

Background. It is important to study how the remediation method influences the formation of the pigment complex in Scots pine, Pinus sylvestris L., growing on technogenic land. Thorough understanding of the influence produced by a heterogeneous environment on the content and distribution of pigments in conifers enables us to study the adaptive mechanisms of the species more comprehensively. In turn, information about these mechanisms can be used to create new methods for improving the quality and stability of tree stands. Purpose. The study was designed to explore the effect of the remediation method on the pigment complex forming in Scots pine during a post-technogenic succession in southern Karelia. Material and methods. Surveys were carried out in adjacent sample plots located in a decommissioned sand-and-gravel quarry and in a natural lingonberry-type pine forest site in July 2021 and 2022. The study objects were Scots pine trees growing in a natural forest site and in quarry sites remediated by forest planting. The optical density of the solutions was determined using SF-2000 spectrophotometer. Statistical data processing was done using Statistica 10 software (StatSoft Inc., USA). Results. During the two years of the study, the pigment content was the highest in needles of the trees growing on more fertile soils compared to those on poor man-made soils. The of Cl a /Cl b ratio in the needles of trees growing on poor soil was higher than in the fertilized area of the quarry or in the natural forest site in both years of the study, indicating that the plants’ pigment complex adapted to the unfavorable environmental conditions by increasing the proportion of Cl a among green pigments. Conclusions. The findings prove that the remediation method has a significant shaping effect on the pigment profile of Scots pine during post-technogenic successions.

Development of a Precise Tree Structure from LiDAR Point Clouds

Abstract. A precise tree structure that represents the distribution of tree stem, branches, and leaves is crucial for accurately capturing the full representation of a tree. Light Detection and Ranging (LiDAR)-based three-dimensional (3D) point clouds (PCs) capture the geometry of scanned objects including forests stands and individual trees. PCs are irregular, unstructured, often noisy, and contaminated by outliers. Researchers have struggled to develop methods to separate leaves and wood without losing the tree geometry. This paper proposes a solution that employs only the spatial coordinates (x, y, z) of the PC. The new algorithm works as a filtering approach, utilizing multi-scale neighborhood-based geometric features (GFs) e.g., linearity, planarity, and verticality to classify linear (wood) and non-linear (leaf) points. This involves finding potential wood points and coupling them with an octree-based segmentation to develop a tree architecture. The main contributions of this paper are (i) investigating the potential of different GFs to split linear and non-linear points, (ii) introducing a novel method that pointwise classifies leaf and wood points, and (iii) developing a precise 3D tree structure. The performance of the new algorithm has been demonstrated through terrestrial laser scanning PCs. For a Scots pine tree, the new method classifies leaf and wood points with an overall accuracy of 97.9%.

Partitioning seasonal stem carbon dioxide efflux into stem respiration, bark photosynthesis, and transport-related flux in Scots pine.

Stem CO2 efflux is an important component of the carbon balance in forests. The efflux is considered to principally reflect the net result of two dominating and opposing processes: stem respiration and stem photosynthesis. In addition, transport of CO2 in xylem sap is thought to play an appreciable role in affecting the net flux. This work presents an approach to partition stem CO2 efflux among these processes using sap-flux data and CO2-exchange measurements from dark and transparent chambers placed on mature Scots pine (Pinus sylvestris) trees. Seasonal changes and monthly parameters describing the studied processes were determined. Respiration contributed most to stem net CO2 flux, reaching up to 79% (considering the sum of the absolute values of stem respiration, stem photosynthesis, and flux from CO2 transported in xylem sap to be 100%) in June, when stem growth was greatest. The contribution of photosynthesis accounted for up to 13% of the stem net CO2 flux, increasing over the monitoring period. CO2 transported axially with sap flow decreased towards the end of the growing season. At a reference temperature, respiration decreased starting around midsummer, while its temperature sensitivity increased during the summer. A decline was observed for photosynthetic quantum yield around midsummer together with a decrease in light-saturation point. The proposed approach facilitates modeling net stem CO2 flux at a range of time scales.

The economic evaluation of timber obtained from Norway spruce and scots pine grown under different thinning regimes in Lithuania

ABSTRACT In Lithuania, no studies have determined the relationship between the quality and economic benefits of Norway spruce and Scots pine wood based on age, stand density, and various forest management technologies. This study aims to assess and compare the economic benefits of Norway spruce and Scots pine in stands of different initial densities, depending on different forest management measures. This study calculated different pre-commercial thinning intensities 4 times, 3 times, and 2 times and final thinning profitability by stand volume and wood quality parameters modulus of elasticity and bending strength. Moreover, thinning intensities included three initial stand densities of 3000–3100, 2000–2100, and 1000–1100 trees per hectare, and different thinning regimes when the stand was thinned from below at the age of 8–9, 15, 21, and 35 years. The results showed higher profitability in the pre-commercial thinning of low-intensity with higher frequency − 4 thinning operations over the 40 years. However, the high-thinning intensity − 2 thinning operations over 40 years – applied in young Norway spruce and Scots pine stands will reduce wood quality and profitability in the future. The study found that stand thinning of low intensity tends to improve wood quality and the profitability that depends on it. After assessing the wood quality, it turned out that the 40-year-old Scots pine trees were too young to harvest because of low wood quality. However, the timber from Norway spruce trees could be used profitably if there is a market demand.

Формирование морфологии деревьев культивируемых сосновых древостоев

The aim of this study is to assess the qualitative characteristics of the crowns, stems and growth of Scots pine (Pinus sylvestris L.) trees in cultivated stands of a dry forest on gently sloping hills thinned in a regular-uniform manner, as well as to develop proposals for production based on the data obtained. The stands under study grow in the southwestern part of the ribbon forests of the Altai Territory in the territory of the Klyuchevskoye forestry. The thinning was carried out in 2016 as part of the planned forest maintenance activities. The field stage of the research was completed in 2022. The sample plots laid had a rectangular shape and a square of at least 0.25 ha. The assessment of the qualitative characteristics of the trees has been carried out in accordance with the classification proposed by G.A. Chibisov et al. The significance of differences (or their absence) in the tree distribution by quality categories in the plots has been established using the χ2 test for comparing two distributions. The article presents the taxation characteristics of the main forest element of the stands under study, the quality indices for the assessed tree indicators, and the graphs of tree distribution by diameter and quality classes. It has been found that most of the trees have poor crowns (27–45 %) and growth (14–41 %). Such indicators are a consequence of an excessively high density of the stands and the lack of timely thinning. Regular-uniform thinning of moderate and moderately high intensity has contributed to an increase in the quality class of the trees. The impact of high and very high intensity thinning on the stands has been negative. Based on the conducted research, it is recommended to carry out thinning at an earlier age of the stand, abandon the regular-uniform thinning in favor of selective thinning using the grassroots method (if possible) and carry out thinning along the largest exploitable diameter of 10 cm in the studied forest stands and similar ones. The study can be continued by establishing the optimal exploitable diameter in younger plantations and in other types of forests, as well as determining the intervals of optimal density of pine stands of different ages and different types of forest. The results obtained can be useful in designing economic activities in the study area.

Особенности генетической структуры популяции Pinus sylvestris L. в степной зоне Европейской России

The article presents the results of studу of the genetic structure of Scots pine (Pinus sylvestris L.) growing in the ecologically favorable territory of the steppe zone of European Russia. 35–year-old pine forest plantations (the Voronezh Region, Kantemirovskiy District, the 3rd bonitet class, forest site type – A1, a random sample, 60 trees) have been chosen as the object of the study. Genetic diversity has been examined on the basis of the microsatellite analysis of 18 SSR-loci (14 EST-SSR-loci and 4 nSSR-loci) and two isozymic loci (shikimate dehydrogenase and glutamate dehydrogenase – or Skdh and Gdh, respectively). It has been revealed that in the studied population, all the used microsatellite loci, with the exception of lw_isotig02842, are polymorphic. The average values of genetic variability calculated from the microsatellite loci have been obtained: the proportion of the polymorphic loci – 94.44 %, the average number of alleles per locus – 3.500, the average effective number of alleles – 2.466, the observed and expected heterozygosity – 0.209 and 0.493 respectively; the Wright fixation index – 0.577. In terms of the level of allelic diversity, the plantation is characterized by relatively lower values of genetic and statistical population parameters (the average observed and expected heterozygosity) compared to the natural forest-steppe populations of the Central Chernozem Region. A high positive Wright fixation index indicates the presence of an increased proportion of inbreeding in the steppe population trees. The reasons and possible nature of the revealed phenomenon are discussed. Based on the isoenzyme analysis, the genetic structure of the Skdh and Gdh loci is examined. The results of the analysis indicate a high frequency of the rapid allele Skdh-11 (82 %) and the embryonic semi-lethal allele Gdh-11 (22 %), which, apparently, can be considered as one of the mechanisms of the population adaptation to the conditions of a warmer and drier climate of the steppe region. A deficiency of glutamate dehydrogenase heterozygotes has been established. It has also been noted that the groups of EST-SSR-loci and nSSR-loci differ in the level of genetic variability and population structure. It has been shown that the combined use of different types of genetic markers makes it possible to obtain more complete and objective information on the distinctive features of the genetic structure of pine forests in the optimal and pessimal zones of the range. The studied 18 microsatellite loci can be used to assess the genetic diversity of Scots pine populations and trees in the steppe region of European Russia.

Elevation-dependent tree growth response to climate in a natural Scots pine/downy birch forest in northern Sweden.

Forests dominate the landscape at high latitudes in the boreal regions and contribute significantly to the global carbon stock. Large areas are protected and provide possibilities to analyze natural forest dynamics including resilience to climate change. In Fennoscandia, Scots pine (Pinus sylvestris L.) and downy birch (Betula pubescens Ehrh.) often coexist in natural forests close to the limits of their ecological ranges. Tree growth in these forests is generally thought to be limited by temperature, and changes in growth trends can therefore serve as early indicators of the impact of global warming on natural ecosystems. We sampled 592 Scots pine and downy birch trees along two elevational gradients spanning the transition from the forest zone to the coniferous treeline in Tjeggelvas nature reserve, northern Sweden. Based on the tree-ring data, we compared annual basal area increment (BAI) trends from 1902 to 2021, analyzed the ring-width indices (RWI) in relation to local climate data, and investigated trends in climate-growth relationships. We found that the mean annual growth of both species was higher in more recent years than at the beginning of the 20th century. The RWI were positively correlated with summer temperatures, however, we found a much stronger relationship for Scots pine than downy birch. We noticed a decrease in the importance of summer temperature for Scots pine growth, whereas the importance of late spring temperatures increased over the 120-year-long study period. Due to strongly positive BAI trends combined with a decrease in temperature sensitivity, the overall conclusion of our study is that the influence of increasing temperatures is still positive and outweighs the negative impacts of climate change on Scots pine growth in natural forests in northern Sweden, particularly at higher elevations. Natural forests are important natural experiments that contrast the managed forests and are key to understanding the latter.

Finding balance: Tree-ring isotopes differentiate between acclimation and stress-induced imbalance in a long-term irrigation experiment.

Scots pine (Pinus sylvestris L.) is a common European tree species, and understanding its acclimation to the rapidly changing climate through physiological, biochemical or structural adjustments is vital for predicting future growth. We investigated along-term irrigation experiment at a naturally dry forest in Switzerland, comparing Scots pine trees that have been continuously irrigated for 17 years (irrigated) with those for which irrigation was interrupted after 10 years (stop) and non-irrigated trees (control), using tree growth, xylogenesis, wood anatomy, and carbon, oxygen and hydrogen stable isotope measurements in the water, sugars and cellulose of plant tissues. The dendrochronological analyses highlighted three distinct acclimation phases to the treatments: irrigated trees experienced (i) a significant growth increase in the first 4 years of treatment, (ii) high growth rates but with a declining trend in the following 8 years and finally (iii) a regression to pre-irrigation growth rates, suggesting the development of a new growth limitation (i.e. acclimation). The introduction of the stop treatment resulted in further growth reductions to below-control levels during the third phase. Irrigated trees showed longer growth periods and lower tree-ring δ13 C values, reflecting lower stomatal restrictions than control trees. Their strong tree-ring δ18 O and δ2 H (O-H) relationship reflected the hydrological signature similarly to the control. On the contrary, the stop trees had lower growth rates, conservative wood anatomical traits, and a weak O-H relationship, indicating a physiological imbalance. Tree vitality (identified by crown transparency) significantly modulated growth, wood anatomical traits and tree-ring δ13 C, with low-vitality trees of all treatments performing similarly regardless of water availability. We thus provide quantitative indicators for assessing physiological imbalance and tree acclimation after environmental stresses. We also show that tree vitality is crucial in shaping such responses. These findings are fundamental for the early assessment of ecosystem imbalances and decline under climate change.

Stronger genetic differentiation among within-population genetic groups than among populations in Scots pine provides new insights into within-population genetic structuring

We investigated the presence of spatial genetic groups within forest tree populations and determined if the genetic divergence among these groups is greater than that between populations using Scots pine (Pinus sylvestris) as a model species. We genotyped 890 adult trees of Scots pine in six natural populations in Lithuania at 11 nuclear microsatellite loci. We used a Bayesian clustering approach to identify the within-population genetic groups within each of the six populations. We calculated the differentiation indexes among the genetic groups within each population and among the six populations by ignoring the genetic groups. The Bayesian clustering revealed 2 to 6 distinct genetic groups of varying size as the most likely genetic structures within populations. The genetic differentiation indexes among the genetic groups within populations were nearly tenfold greater (FST = 0.012–0.070) than those between the populations (FST = 0.003). We conclude on the existence of markedly stronger structuring of genetic variation within populations than between populations of Scots pine in large forest tracts of northern Europe. Such genetic structures serve as a contributing factor to large within population genetic diversity in northern conifers. We assume that within population mating in Scots pine is not completely random but rather is stratified into genetic clusters. Our study provides pioneering novel key insights into structuring of genetic variation within populations. Our findings have implications for examining within-population genetic diversity and genetic structure, conservation, and management of genetic resources.

Effect of water stress on the accumulation of dehydrins in callus culture cells from Pinus sylvestris L.

Intraspecific differences in the level of stress tolerance in woody plants remain understudied, even though this characteristic is important for tree breeding. Dehydrins are intracellular defense proteins that protect other proteins, as well as membranes, from damage caused by intracellular dehydration under water stress. The present paper aims to examine the possibility of detecting dehydrins produced in response to water stress, as well as interindividual differences in dehydrin accumulation in Pinus sylvestris L. (Scots pine) under in vitro conditions. In this work, callus culture derived from the branch and bud tissues of two Scots pine trees (T3 and T4) was used; for these trees, quantitative and qualitative differences in the composition of dehydrins were found. Interindividual differences in callus cultures were expressed as variations in the frequency of callus formation events and callus culture growth index. With the addition of 5 or 8% polyethylene glycol to the culture medium, the effect of water stress on the callus culture was expressed in a dose-dependent decrease of water content in callus cells, as well as the accumulation of shock protein Hsp70 and dehydrins having masses of 47, 42, and 27 kDa. The composition of dehydrins and the level of their accumulation differed between calluses derived from T3 and T4, suggesting different levels of water stress tolerance in the cells of these callus cultures. The existence of such differences may provide a basis for detecting dehydrins in Scots pine produced in response to water stress.

Measuring the Canopy Architecture of Young Vegetation Using the Fastrak Polhemus 3D Digitizer.

In the context of climate change conditions, addressing the shifting composition of forest stands and changes in traditional forest management practices are necessary. For this purpose, understanding the biomass allocation directly influenced by crown architecture is crucial. In this paper, we want to demonstrate the possibility of 3D mensuration of canopy architecture with the digitizer sensor Fastrak Polhemus and demonstrate its capability for assessing important structural information for forest purposes. Scots pine trees were chosen for this purpose, as it is the most widespread tree species in Europe, which, paradoxically, is very negatively affected by climate change. In our study, we examined young trees since the architecture of young trees influences their growth potential. In order to get the most accurate measurement of tree architecture, we evaluated the use of the Fastrak Polhemus magnetic digitizer to create a 3D model of individual trees and perform a subsequent statistical analysis of the data obtained. It was found that the stand density affects the number of branches in different orders and the heights of the trees in the process of natural regeneration. Regarding the branches, in our case, the highest number of branch orders was found in the clear-cut areas (density = 0.0), whereas the lowest branching was on-site with mature stands (density = 0.8). The results showed that the intensity of branching (assessed as the number of third-order branches) depends on the total number of branches of the tree of different branch orders but also on stand density where the tree is growing. An important finding in this study was the negative correlation between the tree branching and the tree height. The growth in height is lower when the branching expansion is higher. Similar data could be obtained with Lidar sensors. However, the occlusion due to the complexity of the tree crown would impede the information from being complete when using the magnetic digitizer. These results provide vital information for the creation of structural-functional models, which can be used to predict and estimate future tree growth and carbon fixation.

Radiation and temperature drive diurnal variation of aerobic methane emissions from Scots pine canopy.

Methane emissions from plant foliage may play an important role in the global methane cycle, but their size and the underlying source processes remain poorly understood. Here, we quantify methane fluxes from the shoots of Scots pine trees, a dominant tree species in boreal forests, to identify source processes and environmental drivers, and we evaluate whether these fluxes can be constrained at the ecosystem-level by eddy covariance flux measurements. We show that shoot-level measurements conducted in forest, garden, or greenhouse settings; on mature trees and saplings; manually and with an automated CO2-, temperature-, and water-controlled chamber system; and with multiple methane analyzers all resulted in comparable daytime fluxes (0.144 ± 0.019 to 0.375 ± 0.074 nmol CH4 g-1 foliar d.w. h-1). We further find that these emissions exhibit a pronounced diurnal cycle that closely follows photosynthetically active radiation and is further modulated by temperature. These diurnal patterns indicate that methane production is associated with diurnal cycle of sunlight, indicating that this production is either a byproduct of photosynthesis-associated biochemical reactions (e.g., the methionine cycle) or produced through nonenzymatic photochemical reactions in plant biomass. Moreover, we identified a light-dependent component in stand-level methane fluxes, which showed order-of-magnitude agreement with shoot-level measurements (0.968 ± 0.031 nmol CH4 g-1 h-1) and which provides an upper limit for shoot methane emissions.

Fertilisation with potato starch wastewater effect on the growth of Scots pine (Pinus sylvestris L.) forest in Poland

Fertilisation is often used to increase plant productivity in agriculture but has also been used in forestry. In our study, Scots pine forest growing in a nitrogen-poor environment was fertilised with NPK post-production wastewater from a potato starch factory. Our research aimed to investigate the dependence of tree growth on different NPK concentrations. Cell characteristics such as cell wall thickness (CWT), lumen diameter (LD) and tree-ring features such as ring width (RW), total number of cells in annual growth (nTotal), earlywood (EW) and latewood (LW) were investigated. Twenty-six years of regular fertilisation of the forest with different doses of wastewater rich in NPK elements have affected the anatomical structure of Scots pine trees. It is presumed that the reduction in CWT and LD on the fertilised site was due to deficiencies in plant water conductivity, which may have occurred due to physiological drought. The influence of nitrogen on unfertilised site from the wastewater area could contribute to the CWT thickening. The results confirm that the use of NPK in excessive doses is detrimental to trees' conductive system.

Cambial Age Influences PCD Gene Expression during Xylem Development and Heartwood Formation

Heartwood formation is an important ontogenetic stage in Scots pine (Pinus sylvestris L.). The amount of heartwood determines the proportion of functionally active sapwood in the total trunk biomass as well as the quality of wood. The key criterion for heartwood formation is the death of xylem ray parenchyma cells. Previously, models that described the patterns of heartwood formation, depending on the cambial age, were derived from Scots pine trees of different ages. The cambial age is the number of annual xylem layers at the core sampling site at a certain trunk height. We studied the features of the occurrence of programmed cell death (PCD) processes during the xylem differentiation and heartwood formation of 80-year-old Scots pine trees, depending on the cambial age, under the lingonberry pine forest conditions in the transition area of the northern taiga subzone and tundra. We have shown that the distance from the cambial zone to the heartwood boundary does not change significantly with stem height. As the cambial age increases, the lifespan of the formed xylem ray parenchyma cells increases and the activity of PCD genes decreases during the formation of both (1) xylem (in the outer layers of sapwood) and (2) heartwood (in the inner layers of sapwood and transition zone). We hypothesized that the decisive factor in the PCD initiation during heartwood formation is the distance of the xylem ray parenchyma cells from the cambial zone. The younger cambium forms wider annual increments, and therefore the xylem ray parenchyma cells in these parts of the trunk reach the distance from the cambial zone earlier, which is necessary for PCD initiation.