Scientific Borehole Research Articles

Wireline log stratigraphy of the lower Cambrian Læså Formation, Bornholm, Denmark.

A detailed correlation of the lower Cambrian Læså Formation on southern Bornholm, Denmark, is based on gamma ray and formation resistivity wireline logs from 25 water supply wells and 5 scientific boreholes. The interpretation hinges on comparison with the wireline log suite obtained in the fully cored Borggård-1 borehole that penetrated the formation in its entirety. The Norretorp Member, 102.9 m thick in Borggård-1, consists predominantly of intensively bioturbated siltstone. Several levels are strongly glauconitic and usually also contain phosphorite nodules. Fine-grained sandstone beds, 0.5–20 cm thick and interpreted as tempestites, occur throughout the unit; a few thicker sandstone layers consist of stacked tempestites. However, many sandstone beds, primarily in the upper 2/3 of the member, have been partly or totally obliterated by the pervasive bioturbation. The overlying Rispebjerg Member, 3.5 m thick in Borggård-1, is dominated by well-cemented medium to coarse-grained quartz sandstone. The variable lithology of the Læså Formation is illustrated by photos of core samples from Borggård-1. The studied wells are located on different fault blocks with 18 km between the easternmost and westernmost well sites. The Norretorp Member is of almost similar thickness throughout the study area whereas the Rispebjerg Member is 2.2–5.6 m thick. The essentially unchanging thickness of the Læså Formation and the sheet like distribution of tempestites demonstrate that the intense faulting of southern Bornholm post-dates deposition. The Norretorp Member is divided into a lower log-unit (57 m thick in Borggård-1) characterized by a moderately variable gamma ray log pattern and an upper log-unit (46 m thick in Borggård-1) exhibiting a more uniform gamma radiation of overall lower intensity. The log-units reflect a more common occurrence of glauconite and phosphorite in the lower part of the member and a higher sand content in the upper part. These lithological differences are also reflected by a generally higher resistivity and P-wave velocity in the upper log-unit. Seven thicker sandstone horizons (15–80 cm thick), labelled S1 to S7, are laterally persistent within the Norretorp Member. Four additional horizons, referred to as MGL [multiple gamma low], MGH [multiple gamma high], MM [middle marker] and GH [gamma high], are also laterally widespread. A readily identifiable red-brown horizon is located at 4.4–5.9 m above the base of the Læså Formation in Borggård-1: it appears to be developed throughout the study area.

Deep-time Arctic climate archives: high-resolution coring of Svalbard's sedimentary record – SVALCLIME, a workshop report

Abstract. ​​​​​​​We held the MagellanPlus workshop SVALCLIME “Deep-time Arctic climate archives: high-resolution coring of Svalbard's sedimentary record”, from 18 to 21 October​​​​​​​ 2022 in Longyearbyen, to discuss scientific drilling of the unique high-resolution climate archives of Neoproterozoic to Paleogene age present in the sedimentary record of Svalbard. Svalbard is globally unique in that it facilitates scientific coring across multiple stratigraphic intervals within a relatively small area. The polar location of Svalbard for some of the Mesozoic and the entire Cenozoic makes sites in Svalbard highly complementary to the more easily accessible mid-latitude sites, allowing for investigation of the polar amplification effect over geological time. The workshop focused on how understanding the geological history of Svalbard can improve our ability to predict future environmental changes, especially at higher latitudes. This topic is highly relevant for the ICDP 2020–2030 Science Plan Theme 4 “Environmental Change” and Theme 1 “Geodynamic Processes”. We concluded that systematic coring of selected Paleozoic, Mesozoic, and Paleogene age sediments in the Arctic should provide important new constraints on deep-time climate change events and the evolution of Earth's hydrosphere–atmosphere–biosphere system. We developed a scientific plan to address three main objectives through scientific onshore drilling on Svalbard: a. Investigate the coevolution of life and repeated icehouse–greenhouse climate transitions, likely forced by orbital variations, by coring Neoproterozoic and Paleozoic glacial and interglacial intervals in the Cryogenian (“Snowball/Slushball Earth”) and late Carboniferous to early Permian time periods.b. Assess the impact of Mesozoic Large Igneous Province emplacement on rapid climate change and mass extinctions, including the end-Permian mass extinction, the end-Triassic mass extinction, the Jenkyns Event (Toarcian Oceanic Anoxic Event), the Jurassic Volgian Carbon Isotopic Excursion and the Cretaceous Weissert Event and Oceanic Anoxic Event 1a.c. Examine the early Eocene hothouse and subsequent transition to a coolhouse world in the Oligocene by coring Paleogene sediments, including records of the Paleocene–Eocene Thermal Maximum, the Eocene Thermal Maximum 2, and the Eocene–Oligocene transition. The SVALCLIME science team created plans for a 3-year drilling programme using two platforms: (1) a lightweight coring system for holes of ∼ 100 m length (4–6 sites) and (2) a larger platform that can drill deep holes of up to ∼ 2 km (1–2 sites). In situ wireline log data and fluid samples will be collected in the holes, and core description and sampling will take place at The University Centre in Svalbard (UNIS) in Longyearbyen. The results from the proposed scientific drilling will be integrated with existing industry and scientific boreholes to establish an almost continuous succession of geological environmental data spanning the Phanerozoic. The results will significantly advance our understanding of how the interplay of internal and external Earth processes are linked with global climate change dynamics, the evolution of life, and mass extinctions.

Spatial variation in the crustal deformation pattern in the Koyna-Warna region, western India using shear wave splitting

SUMMARY This study investigates crustal anisotropy beneath the Koyna-Warna region (KWR) using waveforms of local earthquakes of magnitude ML ≥ 1.0, recorded at 24 surface and 6 borehole seismic stations during September 2005–February 2020. Waveforms of 1402 local earthquakes that fulfil the splitting criteria (ic < 45°) are used for shear wave splitting analysis, yielding 738 measurements. The study examines the spatial, temporal and depth variations in the fast polarization azimuths (FPAs) and delay times (δt). The average delay times in the Koyna and Warna regions are 0.035 and 0.050 s, respectively, which did not show any significant correlation with depth. The FPAs are predominantly oriented in the NNW–SSE direction in the KWR, commensurate with the in situ maximum horizontal stress (SHmax) obtained using data from a 3-km-deep scientific borehole and individual focal mechanism solutions. The anisotropy beneath KWR is due to the alignment of fluid-filled cracks and pore throats along the SHmax, and is attributed to stress-induced anisotropy. A considerable variation in the orientation of FPAs from NW to NNW–SSE beneath KWR could be associated with heterogeneity in the lithological properties due to variation in the fracture orientation under regional stress. The non-parallel orientation of FPAs with SHmax or faults at some stations is attributed to structure-induced anisotropy, which seems to be associated with surface topography. Measurements at stations, even near the reservoirs, did not show any significant temporal variation in the splitting parameters due to the fluctuation in the water levels.

Determination of the crustal friction and state of stress in deep boreholes using hydrologic indicators

We apply binary logistic regression to correlate fracture shear-slip criticality to hydraulic conductivity using data from four deep scientific boreholes in fractured crystalline rocks. In each borehole, an optimized decision boundary is obtained by maximizing the joint probability of classifying all fractures in consideration as critical or not. All four cases feature an optimized decision boundary close to the empirical rock friction (μ ​= ​0.6), corroborating the applicability of laboratory-derived friction coefficients to faults in situ. Utilizing this statistical technique, we demonstrate that one can determine the in situ stress orientation and relative magnitude based only on whether fractures of varied orientations are hydraulically conductive, or not. The stress inversion results are consistent with independent stress measurements in each of the four case studies.

Formation Waters Delineate Diverse Hydrogeologic Conditions at a Plate Scale: Eastern Flank of the Juan de Fuca Ridge

AbstractThe chemical composition of formation waters within the upper basaltic crust were calculated or measured at 24 sites on the northwest portion of the Juan de Fuca (JDF) Plate using data from sediment pore waters, scientific boreholes, and seafloor springs. Formation waters differ in composition across this ridge‐flank region because of variations in water‐rock reactions and residence times, exchange rates with overlying sediment pore waters, and microbial processes along flow paths. We interpret spatial variations in the solute composition of formation waters to resolve areas that are geochemically distinct or similar, lateral trends that result from water transport, areas where water‐rock reactions in the deeper crust are apparent, and sites of seawater recharge and formation water discharge. We provide evidence for large‐scale lateral flow associated with two (mostly) buried basement ridges on ∼1.4 and ∼3.5 Ma seafloor, which are subparallel to the JDF spreading axis to the west. Between these two ridges, where the seafloor and the sediment‐basement interface are relatively flat, formation waters have undergone extensive exchange with overlying sediment pore waters, consistent with a long residence time. Basaltic outcrops provide sites of seawater recharge and hydrothermal discharge, sometimes through the same feature, highlighting the heterogeneous nature of hydrogeologic conditions and processes. This work provides a blueprint for future plate‐scale studies to assess, for example, geologic controls of crustal age, spreading rate, and sedimentation on subsurface hydrologic patterns.

Fault associated with the 1967 M 6.3 Koyna earthquake, India: A review of recent studies and perspectives for further probing

The Koyna region in western India, characterized by recurrent seismic activity over more than five decades and confined largely within a 20 km × 30 km area and ∼10 km in depth, is a classical site to study earthquake processes. The largest earthquake in the region, the M 6.3 Koyna earthquake of December 1967, formed a ∼NNE-SSW trending surface rupture, known as Donichawadi fissure zone. The fissure zone, mapped originally over a length of ∼4 km and width of ∼200 m between Nanel and Kadoli by the Geological Survey of India (GSI) in the wake of the earthquake, comprises en-echelon fractures, near-vertical fissures, oblique or diagonal tensional cracks, mole tracks, soil lumps and laterite boulders in paddy cultivated land. We review the Donichawadi fissure zone in the light of extensive seismological data acquired in the past five decades, surface mapping studies, recent geophysical studies, soil-gas helium studies over the fissure zone during 1996–1997, chemical and noble gas isotope compositions of formation gases, and subsurface fracture data from downhole image logs in a 3 km - deep scientific borehole drilled in 2017. Integration of the datasets provide clinching evidence that the Donichawadi fissure zone is the surface manifestation of a deeper crustal fault (referred as Donichawadi fault) that has been active for more than 55 years and yield critical new insights on the geometry, distribution and possible subsurface disposition of the fissures and the associated fractures in the subsurface. We conclude that the Donichawadi fault offers a potential target for further deep probing through scientific drilling, downhole measurements and long-term monitoring to gain new insights into the genesis of triggered earthquakes in the area.

Mid-latitude precipitation in East Asia influenced by a fluctuating greenhouse climate during the latest Cretaceous through the earliest Paleogene

Deep-time records from greenhouse climate periods (e.g., the Late Cretaceous) provide a reference point for understanding how high atmospheric CO 2 concentrations influence precipitation in the mid-latitude Northern Hemisphere (e.g., East Asia). In this study, we quantitatively reconstruct mean annual precipitation (MAP) in East Asia during the latest Cretaceous through the earliest Paleogene (~76–65.5 Ma), based on a well-studied paleosol sequence from the Sifangtai and Mingshui Formations from the SK-1n scientific borehole in the Songliao Basin, northeastern China. We use several proxies, including sedimentary-based observational proxies (e.g., depth to the calcic horizon, DTC) and elemental geochemistry proxies in the paleosol B horizon (e.g., the chemical index of alteration minus potassium, CIA-K; the calcium‑magnesium weathering index, CALMAG), which show the consistency with weathering proxies and previously published isotopic records. Changes in the MAP are associated with warming and cooling events. In the warciaming period (e.g., at ~69.5–68.5 Ma), an increase in the land-sea thermal contrast led to an expanded, enhanced, poleward-shifted thermal low-pressure system over the East Asian continent, which triggered an enhanced hydrological cycle and increasing MAP in the Songliao Basin. During the cooling period (e.g., at ~72.5–69.5 Ma and ~68.5–66.5 Ma), weakened East Asian monsoon and strengthened equatorward-shifted westerlies allowed for colder and arid air masses to encroach upon the Songliao Basin, which led to decreased MAP. Changes in MAP across the K-Pg boundary coincide with climate fluctuations and catastrophic geological events. Furthermore, our work compares three warming intervals in deep-time (middle Maastrichtian, late Maastrichtian and earliest Paleogene) with Shared Socio-economic Pathway scenarios used by the IPCC for the end of the 21st century, and indicates MAP increases in East Asia with ongoing anthropogenic CO 2 emissions. • The first high-resolution quantitative precipitation record in mid-latitude East Asia during ~76−65.5 Ma.. • Changes in the mean annual precipitation (MAP) associated with climate fluctuations and catastrophic geological events. • Geological records suggest MAP in East Asia will likely increase under ongoing anthropogenic CO 2 emissions.

Geoscience Poster G15: Seismic, petrophysical and petrological constraints on the alteration of igneous rocks in the Northern Carnarvon Basin, Western Australia: implications for petroleum exploration and drilling operations

Poster G15 The Northern Carnarvon Basin (NCB) hosts an extensive record of Jurassic–Cretaceous rift-related igneous activity, manifested by a >45 000 km2 intrusive complex and series of volcanic centres constrained by seismic mapping. However, there are relatively few well penetrations of these igneous rocks (<1% of ~1500 exploration wells) in comparison to other basins that witness extensive magmatism, and thus, their lithological and petrophysical characteristics are poorly understood. Here, we describe the properties of igneous rocks encountered in nine petroleum exploration wells and scientific boreholes in the NCB and evaluate their impacts on exploration and development issues. Igneous rocks in the NCB are characterised by pervasive alteration, with ramifications for seismic imaging and drilling. For example, low acoustic velocities in mafic lavas altered to clays in Toro-1 were mistaken for overpressure, whilst intrusive rocks in Palta-1 were initially unrecorded and only recognised due to subsequent post-drilling thermal history analysis. The alteration of mafic igneous rocks to clays reduces acoustic impedance contrasts relative to sedimentary host rocks, making their identification prior to drilling more challenging. Whilst the preferential emplacement of intrusive rocks in Triassic strata deeper than reservoir targets is primarily responsible for the paucity of well penetrations, our findings of extensive alteration of igneous rocks in the NCB suggests that additional wells may intersect as yet unrecognised intrusive or extrusive sequences. To access the poster click the link on the right. To read the full paper click here

Seismic, petrophysical and petrological constraints on the alteration of igneous rocks in the Northern Carnarvon Basin, Western Australia: implications for petroleum exploration and drilling operations

The Northern Carnarvon Basin (NCB) hosts an extensive record of Jurassic–Cretaceous rift-related igneous activity, manifested by a >45 000 km2 intrusive complex and series of volcanic centres constrained by seismic mapping. However, there are relatively few well penetrations of these igneous rocks (<1% of ~1500 exploration wells) in comparison to other basins that witness extensive magmatism, and thus, their lithological and petrophysical characteristics are poorly understood. Here, we describe the properties of igneous rocks encountered in nine petroleum exploration wells and scientific boreholes in the NCB and evaluate their impacts on exploration and development issues. Igneous rocks in the NCB are characterised by pervasive alteration, with ramifications for seismic imaging and drilling. For example, low acoustic velocities in mafic lavas altered to clays in Toro-1 were mistaken for overpressure, whilst intrusive rocks in Palta-1 were initially unrecorded and only recognised due to subsequent post-drilling thermal history analysis. The alteration of mafic igneous rocks to clays reduces acoustic impedance contrasts relative to sedimentary host rocks, making their identification prior to drilling more challenging. Whilst the preferential emplacement of intrusive rocks in Triassic strata deeper than reservoir targets is primarily responsible for the paucity of well penetrations, our findings of extensive alteration of igneous rocks in the NCB suggests that additional wells may intersect as yet unrecognised intrusive or extrusive sequences.

Abnormally low heat flow in Southeast China resulted from remnant slab subducted beneath the east Asian lithosphere

AbstractSubducted remnant slabs play an important role in the geodynamics and evolution of the Earth, but their behaviour in the mantle is not well understood. Terrestrial heat flow and thermal lithosphere structure provide crucial constraints on lithospheric dynamics. Based on whole‐well steady‐state temperature logs and conductivity measurements of core samples from a scientific borehole, we obtained a new high‐quality terrestrial heat flow values for East Asia. The heat flow was calculated at 60.6 ± 16.0 mW/m2 with a high crust/mantle heat flow ratio of 1.41, suggesting a hot‐crust‐cold‐mantle lithospheric structure. The thermal lithospheric thickness of eastern Fujian is estimated to be 152–166 km, indicating a thick and cold lithosphere. We demonstrate that the cooling of the lithosphere is caused by a remnant palaeo‐slab of the Palaeo‐Pacific plate subducted beneath SE China. The remnant slab blocked heat convection into the bottom of the lithosphere of the Eurasian Plate.

Multi-physical distributed fiber optic observation in a 3211-m-deep scientific borehole at Jiajika lithium mine, western Sichuan

川西甲基卡锂矿3211m科学深钻位于青藏高原东缘鲜水河断裂及川藏铁路附近，是目前青藏高原上最深的科学钻孔. 利用此深钻观测深部物理场和浅部环境变化过程，对于研究青藏高原地壳活动、川藏铁路场地稳定性和生态环境保护等均具有重要意义. 采用分布式光纤传感（DFOS）技术，课题组研发了高强度、耐高温特种传感光缆，成功植入甲基卡锂矿深钻中，建成了世界上海拔最高和深度最大的光纤观测孔，实现了应变、温度、振动、水分等多物理量的分布式原位观测. 本文是甲基卡光纤观测孔第一阶段的成果，包括岩体热导率的原位测定、钻孔回填过程的DAS观测、地震监测与地震成像等方面的初步进展. 研究结果表明：DFOS应用于深钻全断面多物理量观测是可行的，它完全能适应深钻高温和高压的观测环境，并具有长距离、实时、连续分布式观测的优势；将分布式温度传感光纤、应变传感光纤和声波传感光纤集于一根传感光缆的设计思路保障了深钻传感光缆的安装质量，并为DFOS技术应用于地球物理和地质工程的多物理场观测开辟了广阔的应用空间.

S-wave anisotropy from two dipole sonic data processing methods, confronted with fracture permeability, logs and cores

The present paper consists in two parts, determined by the historical emerging production of Dipole Sonic Imager (DSI) measurements and results in the early 1990’s. The DSI data were processed following two methods simultaneously developed in France and in USA by Schlumberger. In the first part the early dipole sonic S-wave velocity results obtained in late 1993 are confronted with the other borehole data obtained in the scientific borehole MM-1, entirely cored and extensively logged, as part of the comprehensive scientific project named Géologie Profonde de la France (GPF), conducted by the Bureau de Recherches Géologiques et Minières (BRGM, i.e. the French Geological Survey), in Ardèche, southern France. In 1994, José Perrin summarized and integrated all the borehole information including the preliminary results from an azimuthal “rotation scan” of S-wave sonic slowness determination method quickly developed in Schlumberger-France and aiming at detecting only the presence of S-wave velocity anisotropy in a first step. The initial results were presented to the French industrial logging community in April 1994, prior to the commercialization of any S-wave splitting computer detection routine applied to dipole sonic data. The second part focuses on the comparison of the dipole sonic S-wave anisotropy detection results from two methods produced at a later time by Schlumberger, namely: a) results from the commercial S-wave anisotropy detection routine based on cross energy minimization, obtained in October 1994, and b) principal S-wave azimuth results sorted from the “rotation scan” azimuthal method, produced in 1995 and further improved in July 1997. After discussing the discrepancies of the principal fast S-wave azimuth derived from the two methods with diverse specialists in Schlumberger, over several years, and on a spare time basis, the authors expose constructive explanations in the present paper. A limited overview of the latest dipole sonic data processing developments has also been attempted to better understand the differing S-wave birefringence results obtained in MM-1, suggesting that the rock formation in the immediate borehole vicinity, up to three times the borehole radius, may not be homogeneous along the borehole depth depending on the local geological context. Besides, the Fast Azimuth split S-wave (FAZ) fits with the strike of major regional faults and parallel to the maximal horizontal palaeo-stress, which happens to be nearly orthogonal to the local present stress direction accepted by the geologists! The present case study suggests that the S-wave anisotropy results ought to become more reliable, mainly on the accuracy and precision of the FAZ. Additionally, the efficiency of the semblance parameter for S-wave attenuation anisotropy detection is pondered, where no S-wave velocity anisotropy is detected over the dipole sonic receiver array.

Microbial diversity and function in crystalline basement beneath the Deccan Traps explored in a 3 km borehole at Koyna, western India.

Deep terrestrial subsurface represents a huge repository of global prokaryotic biomass. Given its vastness and importance, microbial life within the deep subsurface continental crust remains under-represented in global studies. We characterize the microbial communities of deep, extreme and oligotrophic realm hosted by crystalline Archaean granitic rocks underneath the Deccan Traps, through sampling via 3000 m deep scientific borehole at Koyna, India through metagenomics, amplicon sequencing and cultivation-based analyses. Gene sequences 16S rRNA (7.37× 106 ) show considerable bacterial diversity and the existence of a core microbiome (5724 operational taxonomic units conserved out of a total 118,064 OTUs) across the depths. Relative abundance of different taxa of core microbiome varies with depth in response to prevailing lithology and geochemistry. Co-occurrence network analysis and cultivation attempt to elucidate close interactions among autotrophic and organotrophic bacteria. Shotgun metagenomics reveals a major role of autotrophic carbon fixation via the Wood-Ljungdahl pathway and genes responsible for energy and carbon metabolism. Deeper analysis suggests the existence of an 'acetate switch', coordinating biosynthesis and cellular homeostasis. We conclude that the microbial life in the nutrient- and energy-limited deep granitic crust is constrained by the depth and managed by a few core members via a close interplay between autotrophy and organotrophy.

Hydraulic Modeling of Induced and Propagated Fractures: Analysis of Flow and Pressure Data From Hydromechanical Experiments in the COSC‐1 Deep Borehole in Crystalline Rock Near Åre, Sweden

AbstractTo characterize the coupled hydromechanical behavior of rock fractures, the step‐rate injection method for fracture in‐situ properties (SIMFIP) was conducted with a specialized downhole probe developed by Guglielmi et al. (2014, https://doi.org/10.1007/s00603-013-0517-1). In June 2019, a field campaign was carried out near Åre, Sweden, where the SIMFIP probe was applied in the Collisional Orogeny in the Scandinavian Caledonides‐1 scientific borehole to understand the dynamics of injection‐induced fracture initiation, fracture opening, and shearing due to water injection‐withdrawal in a borehole interval isolated by two packers. Three intervals were investigated at ∼500 m depth: (a) an unfractured section (intact rock), (b) a section with non‐conductive fractures, and (c) a section with hydraulically conductive fractures. Pressure, injection flow rate, and borehole wall displacement were simultaneously measured during the tests. In the present study, the geometry of the induced fracture and deformation of existing fractures at different time stages of the tests are determined based on a hydrologic model by using the measured pressure and flow data during each time stage of the experiment. A numerical model for the fluid flow within the fracture and the packed‐off borehole interval is implemented within COMSOL Multiphysics. By matching model simulations with observed data for all three sections, estimates of the induced and propagated fractures' radius and aperture at successive time stages have been obtained in each case. We could also determine the non‐linear relationship between fracture aperture and pressure for values above fracture opening pressures. The model results provide insights for the understanding of pressure‐induced fracture initiation and propagation in crystalline rock.

Thermal and Physical Properties of Deccan Basalt and Neoarchean Basement Cores From a Deep Scientific Borehole in the Koyna−Warna Seismogenic Region, Deccan Volcanic Province, Western India: Implications on Thermal Modeling and Seismogenesis

AbstractWe have investigated 78 core samples of basaltic trap and Neoarchean basement in the laboratory from a 981 m deep scientific borehole KBH‐05, in the Koyna−Warna seismic zone, in order to characterize their thermal and physical properties and present a probable crustal thermal model. The Koyna−Warna, located in the Deccan Volcanic Province (DVP), is globally one of the most prominent Reservoir Triggered Seismicity (RTS) regions. Thermal conductivity, density, and porosity vary widely (1.0–1.7 Wm−1K−1, 2,400–3,000 kg m−3, 0.2%–10%) for the basalt due to their lithological heterogeneities, i.e., massive/amygdaloidal/vesicular. In comparison, the basement, which dominantly consists of gneiss/migmatite gneiss (granodiorite to tonalite to quartz monzodiorite in composition) and amphibolite, have shown a wider range in thermal conductivity (2.2–3.4 Wm−1K−1) but constricted range in density and porosity (2,600–2,800 kg m−3, 0.01%–0.15%). Based on gamma and sonic logs, as well as radioelements (Th, U, K), the 499 m thick basaltic trap can be divided into two thick layers (325, 174 m) and five sub‐layers, which can be correlated with different basaltic formations. Similarly, the underlying basement can also be divided into two layers (93, 384 m). The upper basement layer has two times higher concentrations of Th and U than the lower layer, with heat production of 2.0, 0.8 μWm−3. Further, the study provides a robust temperature estimate of 165°C–250°C at 10 km depth, considerably higher than reported earlier for the DVP, and reveals that in addition to thermal parameters, RTS also plays an important role in the seismogenesis of the region.

3D morphology of a glacially overdeepened trough controlled by underlying bedrock geology

Subglacial overdeepenings are common elements of mountain forelands and have considerable implications for human infrastructure. Yet, the processes of overdeepening by subglacial erosion and especially the role of bedrock geology are poorly understood. We present a case study of the Gebenstorf-Stilli Trough in northern Switzerland, a foreland overdeepening with a regionally unique, complex underlying bedrock geology: in contrast to other Swiss foreland overdeepenings, it is incised not only into Cenozoic Molasse deposits, but also into the underlying Mesozoic bedrock. In order to constrain the trough morphology in 3D, it was targeted with scientific boreholes as well as with seismic measurements acquired through analysis of surface waves. Our results reveal an unexpectedly complex trough morphology that appears to be closely related to the bedrock geology. Two sub-basins are incised into calcareous marls and Molasse deposits, and are separated by a distinct ridge of Jurassic limestones, indicating strong lithological control on erosional efficiency. We infer generally relatively low glacial erosion efficiency sensu stricto (i.e. quarrying and abrasion) and suggest that the glacier's basal drainage system may have been the main driver of subglacial erosion of the Gebenstorf-Stilli Trough.

Evaluating the segmented post-rift stratigraphic architecture of the Guyanas continental margin

Segmentation of the Guyanas continental margin of South America is inherited from the dual-phase Mesozoic rifting history controlling the first-order post-rift sedimentary architecture. The margin is divided into two segments by a transform marginal plateau (TMP), the Demerara Rise, into the Central and Equatorial Atlantic domains. This paper investigates the heterogeneities in the post-rift sedimentary systems at a mega-regional scale (>1000 km). Re-sampling seven key exploration wells and scientific boreholes provides new data (189 analysed samples) that have been used to build a high-resolution stratigraphic framework using multiple biostratigraphic techniques integrated with organic geochemistry to refine the timing of 10 key stratigraphic surfaces and three megasequences. The results have been used to calibrate the interpretation of a margin-scale two-dimensional seismic reflection dataset, and to build megasequence isochore maps, structural restorations and gross depositional environment maps at key time intervals of the margin evolution. Our findings revise the dating of the basal succession drilled by the A2-1 well, indicating that the oldest post-rift sequence penetrated along the margin is late Tithonian age (previously Callovian). Early Central Atlantic carbonate platform sediments passively infilled subcircular-shaped basement topography controlled by the underlying basement structure of thinned continental crust. Barremian–Aptian rifting in the Equatorial Atlantic, caused folding and thrusting of the Demerara Rise, resulting in major uplift, gravitational margin collapse, transpressional structures and peneplanation of up to 1 km of sediment capped by the regional angular Base Albian Unconformity. Equatorial Atlantic rifting led to margin segmentation and the formation of the TMP, where two major unconformities developed during the intra Late Albian and base Cenomanian. These two unconformities are time synchronous with oceanic crust accretion offshore French Guiana and in the Demerara–Guinea transform, respectively. A marine connection between the Central and Equatorial Atlantic is demonstrated by middle Late Albian times, coinciding with deposition of the organic-rich source rock of the Canje Formation (average total organic carbon 4.21%). The succession is variably truncated by the Middle Campanian Unconformity. Refining the stratigraphic framework within the context of the structural evolution and segmentation of the Guyanas margin impacts the understanding of key petroleum system elements. Supplementary material : Photographs of sandstone petrography thin sections (Fig. S1); calcareous nannofossil plates (Fig. S2); palynology reports for A2-1 and FG2-1 (Fig. S3); taxonomy description of new species; sample table and organic geochemistry results (Table S1); and nannofossil distribution charts (Table S2) are available at https://doi.org/10.6084/m9.figshare.c.5280490

Upper Cretaceous paleoenvironmental changes and petrophysical responses in lacustrine record (Songliao Basin, NE China) and marine sedimentary deposit (Goban Spur Basin, NW Europe)

AbstractThe Cretaceous interval is marked by several important geological changes whose prints are buried in both continental and marine sytems. Although significant paleoenvironmental details of this period have been inferred from biological and geochemical indicators, little is known about the physical proxies. Through scientific borehole data, petrophysical properties of Upper Cretaceous Songliao Basin (SB) in NE China and Goban Spur Basin (GSB) in NW Europe were intercorrelated to investigate the critical geological paleoenvironmental shifts and their petrophysical responses, through statistical, wavelet and spectral approaches. The results demonstrated that petrophysical features, particularly gamma-ray and resistivity reactivities, were responsive to past environmental changes in both terrestrial and marine systems. Shifts in organic-rich shale deposition and brine bearing shale showed a correlation to a probable period of seawater incursion in SB, while the gamma log, resistivity and density reactivities were interrelated to the basin paleo-structuration. At GSB, the gamma-ray and resistivity reactivities are tied-up to the Mid-Atlantic seabed motion, marine-water level shifts and paleoceanographic instabilities. In both paleo-basins, a decrease in the gamma-ray reactivity occurred from Turonian to Maastrichtian and is consistent with a regional or global increase in hydrodynamic energy. The oceanic/lacustrine anoxic events related to low sedimentation rate occurred in both basins and are associated with high gamma-ray and resistivity signals (SB); high gamma-ray and low resistivity signals (GSB). These changes correlated with geochemical evidence, suggesting that gamma-ray and resistivity can represent alternative means for marine and continental paleoenvironmental comparison.

Borehole research in New York State can advance utilization of low-enthalpy geothermal energy, management of potential risks, and understanding of deep sedimentary and crystalline geologic systems

Abstract. In January 2020, a scientific borehole planning workshop sponsored by the International Continental Scientific Drilling Program was convened at Cornell University in the northeastern United States. Cornell is planning to drill test wells to evaluate the potential to use geothermal heat from depths in the range of 2700–4500 m and rock temperatures of about 60 to 120 ∘C to heat its campus buildings. Cornell encourages the Earth sciences community to envision how these boreholes can also be used to advance high-priority subsurface research questions. Because nearly all scientific boreholes on the continents are targeted to examine iconic situations, there are large gaps in understanding of the “average” intraplate continental crust. Hence, there is uncommon and widely applicable value to boring and investigating a “boring” location. The workshop focused on designing projects to investigate the coupled thermal–chemical–hydrological–mechanical workings of continental crust. Connecting the practical and scientific goals of the boreholes are a set of currently unanswered questions that have a common root: the complex relationships among pore pressure, stress, and strain in a heterogeneous and discontinuous rock mass across conditions spanning from natural to human perturbations and short to long timescales. The need for data and subsurface characterization vital for decision-making around the prospective Cornell geothermal system provides opportunities for experimentation, measurement, and sampling that might lead to major advances in the understanding of hydrogeology, intraplate seismicity, and fluid/chemical cycling. Subsurface samples could also enable regional geological studies and geobiology research. Following the workshop, the U.S. Department of Energy awarded funds for a first exploratory borehole, whose proposed design and research plan rely extensively on the ICDP workshop recommendations.

A new high-temperature borehole fluid sampler: the Multi-Temperature Fluid Sampler

Abstract. Deep (>1 km depth) scientific boreholes are unique assets that can be used to address a variety of microbiological, hydrologic, and biogeochemical hypotheses. Few of these deep boreholes exist in oceanic crust. One of them, Deep Sea Drilling Project Hole 504B, reaches ∼190 ∘C at its base. We designed, fabricated, and laboratory-tested the Multi-Temperature Fluid Sampler (MTFS), a non-gas-tight, titanium syringe-style fluid sampler for borehole applications that is tolerant of such high temperatures. Each of the 12 MTFS units collects a single 1 L sample at a predetermined temperature, which is defined by the trigger design and a shape memory alloy (SMA). SMAs have the innate ability to be deformed and only return to their initial shapes when their activation temperatures are reached, thereby triggering a sampler at a predetermined temperature. Three SMA-based trigger mechanisms, which do not rely on electronics, were tested. Triggers were released at temperatures spanning from 80 to 181 ∘C. The MTFS was set for deployment on International Ocean Discovery Program Expedition 385T, but hole conditions precluded its use. The sampler is ready for use in deep oceanic or continental scientific boreholes with minimal training for operational success.