Schiff Base Research Articles

Synthesis, spectroscopic characterization, density functional theory calculations and biological evaluation of novel Cu(II) and Zn(II) Schiff base complexes as antimicrobial agents

Synthesis, spectroscopic characterization, density functional theory calculations and biological evaluation of novel Cu(II) and Zn(II) Schiff base complexes as antimicrobial agents

Comparative Analysis of Tetravalent Actinide Schiff Base Complexes: Influence of Donor and Ligand Backbone on Molecular Geometry and Metal Binding.

A series of isostructural early actinide AnIV complexes was synthesized in order to investigate the influence of a conjugated framework in the ligand backbone on An bonding. Therefore, the AnIV complexes [An(pyrophen)2] (An = Th, U, Np, and Pu) with the pure N-donor ligand bis(2-pyrrolecarbonylaldehyde)-o-phenylenediamine referred to as pyrophen, were synthesized and characterized. Solid state analysis via single-crystal X-ray diffraction (SC-XRD) reveals two sets of ligands binding in an almost orthogonal arrangement to the actinide center. For the larger actinides Th and U, the coordination sphere allows for additional coordination by a solvent molecule. Nuclear magnetic resonance spectroscopy (NMR) studies show the presence of highly symmetrical complexes in solution in good agreement with the solvent-free solid structures. While SC-XRD suggests mainly ionic binding, an analysis of paramagnetic NMR contributions and quantum chemical bond analysis hint towards significant covalency in the U, Np, and Pu compounds. This series of An complexes allowed for a thorough structural and theoretical comparison of a conjugated system to a closely related N-donor ligand (pyren)[1] as well as to the mixed N,O Schiff base ligands salophen (conjugated) and salen (non-conjugated).

Two New Coordination Polymers: Crystal Structures and Fluorescence Properties.

A new Ni (II) metal-organic frameworks with the formula [Ni2(HL)2(H2O)4]∙3H2O (1) and a novel phenoxo-O bridged rare-earth dinuclear Schiff base complex with the formula [La2(dbm)4L·CH3OH] (2), where the HL2- is the partial deprotonated of the organic ligand H3L, and H2L is a bis-Schiff foundation ligand (H3L = 4,6-dioxo-1,4,5,6-tetrahydro-1,3,5-triazine-2-carboxylic acid, H2L = N, N'-bis (2-hydroxy-3-methoxybenzylidene) -propane-1,2-diamine, Hdbm = dibenzoylmethane), have been successfully generated under the solvothermal condition. The targeted product sample of 1 and 2 has been fully characterized by single-crystal X-ray data, elemental analysis, FT-IR, powder X-ray diffraction, and thermogravimetric analysis. Furthermore, fluorescence performance testing of the complexes revealed that in complex 1, H3L forms a rigid chain through coordination with Ni2+ ions and further forms a highly rigid three-dimensional framework within the hydrogen bond network, resulting in fluorescence enhancement of up to 13.7-fold, displaying deep blue fluorescence with CIE coordinates of (0.1626, 0.1375). In contrast, complex 2 forms only discrete zero-dimensional molecules and exhibits light blue fluorescence with CIE coordinates of (0.1744, 0.2306). This demonstrates their potential as fluorescent materials.

Design, Synthesis, ssDNA Binding Affinities, and Evaluation of Novel Metal‐Centered Ferrocene as an Effective Antimicrobial and DNA Cleavage Agent

ABSTRACTMetal (Co3+, Ni2+, and Pt2+)–centered and noncentered ferrocene–Schiff bases were prepared. They have been structurally characterized by spectroscopic methods, elemental analysis, conductivity, and magnetic moment. Electron spin resonance was used for the characterization of the Co3+‐centered complex. All synthesized compounds showed antibacterial activity against all tested Gram‐positive and Gram‐negative strains, as well as potent antifungal effect against Candida species. Remarkably, these compounds demonstrated greater efficacy against Gram‐positive bacteria than Gram‐negative. Without an additional oxidant or reductant, the compounds exhibited DNA cleavage capability in the dark. The development of synthesized novel chemical compounds having DNA cleavage and antimicrobial activity plays a profound role in the advancement of medical therapeutics.

Characterization of Schiff base self-healing hydrogels by dynamic speckle pattern analysis.

Self-healing hydrogels are emerging materials capable of restoring functionality after damage, making them highly suitable for biomedical applications, such as tissue engineering, wound healing, and drug delivery. In this study, we synthesize and characterize a novel biodegradable, conductive, and self-healing hydrogel. The synthesis is based on a Schiff base formed between gelatin and hyaluronic acid, and the dynamic reversible Schiff base bond provides the self-healing property. To characterize and assess the self-healing behavior of the hydrogel, dynamic speckle pattern (DSP) analysis is introduced as a non-destructive, non-contact, and easy-to-implement method. Speckle patterns are formed upon scattering of laser light from a diffusive matter and includes a huge overall information about the sample, to be extracted by statistical processing. DSP analysis is employed to monitor the self-healing process of the hydrogel at both macroscopic and microscopic scales. Experimental procedure involve in situ acquisition of speckle patterns over time under controlled environmental conditions, followed by statistical analysis to evaluate the internal dynamics of the healing process. Several statistical parameters are computed for real-time monitoring of the self-healing property of the hydrogel. The findings, on the one hand, underscore the potential of Schiff base hydrogels in advanced biomedical applications where self-healing properties are critical for sustained performance and longevity. On the other hand, the introduced analysis method shows its potential to serve as an effective approach for biomaterial characterization.

Synthesis and evaluation of vanillin Schiff bases as potential antimicrobial agents against ESBL-producing bacteria: towards novel interventions in antimicrobial stewardship.

The escalating challenge of antimicrobial resistance necessitates the development of novel antibacterial agents. In this study, a series of five vanillin Schiff bases (SB-1 to SB-5) were synthesized from vanillin and various aromatic amines. The chemical structures of these compounds were characterized using Thin Layer Chromatography (TLC), Fourier Transform Infrared Spectroscopy (FT-IR), proton nuclear magnetic resonance ( -NMR), carbon-13 NMR ( -NMR), and mass spectrometry techniques. Antibacterial efficacy was evaluated against strains of bacteria producing extended-spectrum beta-lactamases (ESBL), including Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae using the disc diffusion method. Cytotoxic effects were assessed through haemocompatibility and brine shrimp lethality assays. The Schiff bases demonstrated notable antibacterial activities, with SB-1, SB-2, SB-4, and SB-5 exhibiting zones of inhibition up to 16.0, 16.5, 16.6, and 15.5 mm against ESBL E. coli, respectively. SB-3 showed a maximum inhibition zone of 15.0 mm against ESBL K. pneumoniae. In cytotoxicity assays, the compounds exhibited IC values against red blood cells (RBCs) greater than 200 μg/mL and ranging from 45.7 to 50.5 μg/mL for the brine shrimp assay. While demonstrating potent antibacterial properties, the toxicity towards human RBCs suggests that further toxicity evaluations and structural modifications are essential for developing safer therapeutic agents based on vanillin Schiff bases.

Introducing the SNW-1 Covalent Organic Framework to the Polyamide Layer of the TFC-RO Membrane with Enhanced Permeability and Desalination Performance.

This study investigates the synthesis and characterization of Schiff base network-1 (SNW-1) covalent organic framework (COF) nanomaterials and their application in the fabrication of thin-film nanocomposite (TFN) membranes. The embedding of SNW-1 COF in reverse osmosis (RO) membranes with a polysulfone (PSf) substrate was done using the interfacial polymerization method. The result of the study demonstrated that the porous and hydrophilic structure of the COF increased the hydrophilic properties of the produced RO membranes. When the COF was embedded with a concentration of 0.02 wt %, the hydrophilicity of the RO membrane was higher than that of the other membranes, with a contact angle value of 45.2°. Pure water flux, saline solution flux, and humic acid (HA)/sodium chloride (NaCl) foulant solution flux were measured to determine the membrane performance, and it was found that as the COF ratio increased, the fluxes increased up to a certain concentration rate. The RO membrane with a SNW-1 concentration of 0.005 wt % had the highest values of pure water flux and saline solution flux with high salt rejection (34.2 and 32.2 LMH, 97.1%, respectively) and was the most resistant membrane against fouling. This study presents the potential of the SNW-1 COF with precise design capabilities and controlled unique properties as an additive for desalination applications.

A composite film of oxidized levan crosslinked with gelatin: strong hydrophobic and mechanical properties and effective preservation of fresh Mozzarella cheese.

The fructosan levan was synthesized in vitro using a recombinant levansucrase. The levan was oxidized with sodium periodate to prepare oxidized levan (OLevan) with three oxidation degrees. OLevan, gelatin (Gel), and gallic acid (GA) were used to prepare the composite films by the method of plate pouring. The analytical results of FT-IR and XPS indicated that OLevan and gelatin were covalently crosslinked through a Schiff base reaction. The crosslinked films had better properties compared to the non-crosslinked films, especially the Gel/GA/50%OLevan film. The film had the lowest swelling degree (44.4 %), while that of Gel/GA/Levan film was 352.6 %. Gel/GA/50%OLevan film also had the highest tensile strength (25.48 MPa), while that of Gel/GA film was 9.48 MPa. Also, Gel/GA/50%OLevan film was used as a packaging material of Mozzarella cheese. The film effectively slowed down changes in the texture and color of the cheese. On the first day, the coliform in the control and PE groups had already exceeded the maximum acceptable limit of cheese (2.0 Log CFU/g). However, that of Gel/GA/50%OLevan group reached the limit on the fifth day. The results show that the new film prepared by crosslinking and composite of natural edible materials has good potential as a safe food packaging material.

Pyrene Based Schiff Base for Cascade Fluorescent "On-Off" Detection of Aluminium(III) and Fluoride Ions and its Applications in Live Cells Imaging.

An easy-to-prepare pyrene-based Schiff base PNZ was synthesized by condensing equimolar amount of 1-pyrenebutyric hydrazide with 2-hydroxy-naphthaldehyde, and employed as a fluorescent chemosensor for in-situ cascade detection of aluminium (Al3+) and fluoride (F-) ions. In DMSO:H2O (1 : 1, v/v), the weakly emissive PNZ showed a significant fluorescence enhancement at 455 nm selectively upon the addition of Al3+ due to the complexation-induced formation of a pyrene excimer. Schiff base PNZ and Al3+ formed a complex in 2 : 1 binding ratio with the estimated binding constants of K1:1=9826.01 M-1 and K2:1=3188.49 M-1. The sensing mechanism was explored by performing quantum mechanical calculations and 1H-NMR titration of PNZ with Al3+. The in-situ formed PNZ-Al3+ complex species enabled the fluorescent turn-off detection of F-. Using PNZ and PNZ-Al3+, the concentrations of Al3+ and F- ions can be detected down to 2.89×10-7 M and 1.88×10-7 M, respectively. The cytotoxicity of the PNZ and its ability to bioimage Al3+ and F- ions was examined in the human cervical cancer cell line. Finally, the receptor PNZ was applied for the quantification of Al3+ and F- ions in various real samples, such as tap water, river water, rainwater, mouthwash, and toothpaste.

Synthesis of Ferrocene‐Containing Schiff Bases Based on 3‐Aminopropyltriethoxysilane Oligomers for Covalent Modification of Glass Surfaces and Creation of Soft Magnetic Materials

ABSTRACTA ferrocene‐containing oligoorganosiloxane with a number‐average degree of polymerization of 8.8 and a number‐average molecular weight of 3200 is synthesized by hydrolytic condensation of 3‐aminopropyltriethoxysilane followed by chemical modification of the resulting oligomer with acetylferrocene. Its structure is characterized by MALDI‐TOF, NMR and IR spectroscopy. 1H NMR spectroscopy shows the predominance of more thermodynamically stable units containing anti‐configuration Schiff bases. Using IR spectroscopy as well as experimental determination of surface energy and its polar (acid–base) and dispersion components, the covalent immobilization of ferrocene‐containing oligoorganosiloxane on a glass surface after heating at 110°C is shown. The formed coating provides hydrophobization, acid–base indifference of the glass surface and serves as a precursor for the formation of magnetically soft materials after pyrolysis in argon already at 350°C. The main stages of ferrocene‐containing oligoorganosiloxane thermal destruction in an inert atmosphere and the formation of a mixture of iron and silicon oxides during its thermal oxidative destruction are established by combination of TGA/DTA, IR spectroscopy and elemental analysis. The proposed approach opens up new possibilities for functionalizing silicates surfaces, creating magnetic glasses, as well as regulating surface energy and its components.

Sustainable production of BioAIE materials from biomass

The research of aggregation‐induced emission (AIE) materials has aroused extensive interests during the past 20 years. Until recently, biomass‐inspired AIE (BioAIE) materials have become highly attractive owing to the advantages of natural structural diversity, renewability, biocompatibility, and biodegradability of the biomass. In this concept, we focus on the sustainable production of BioAIE materials from biomass resources (biomacromolecules and small natural products) through extraction, chemical conversion, and physical conversion. Chemical conversion is especially stated, including catalytic conversion, Schiff base reaction, “in water” reaction, and other chemical modifications. The luminescence mechanism of AIE behaviors along with their structure‐property relationships is emphasized, and the applications are addressed as well. An outlook is provided to highlight the challenges and opportunities associated with the future development trend in this field.

Design, Synthesis, and Anti-Mycobacterial Evaluation of Triclosan-Isoniazid Hybrids.

A series of Triclosan-based hybrids and their Schiff base derivatives with isoniazid were designed through in silico modelling and synthesized using copper-catalysed azide-alkyne cycloaddition (CuAAC) reaction. These compounds were then evaluated against both Mycobacterium tuberculosis (Mtb) and Mycobacterium abscessus (Mab). However, none of the synthesized hybrids exhibited significant growth inhibition, with minimum inhibitory concentration (MIC) values consistently exceeding 100 µg/mL. To further investigate these findings, we conducted mechanistic studies including thermogravimetric analysis (TGA) and UV-Vis stability tests. TGA demonstrated thermal stability of the Schiff bases up to 270 °C, while UV-Vis analysis confirmed their chemical resilience across a wide pH spectrum, showing resistance to hydrolysis under acidic and basic conditions. The lack of observed antimicrobial activity may be attributed to the high lipophilicity of these molecules, as indicated by LogP values exceeding 5, which could limit their bioavailability. These findings suggest that although combining triclosan and isoniazid holds potential, further optimization of this hybrid strategy is necessary to improve efficacy.

Enhanced corrosion protection of copper in saline environments using bio-nanocomposite coatings based on chitosan and chitosan Schiff base

An in-depth study focuses on developing new environmentally friendly bio-nanocomposites, by incorporating SrTiO3 (STO) ceramic nanoparticles into matrices of chitosan and its derivatives, aiming to use them as protective coatings against corrosion. The various stages of this study include the cross-linking of chitosan, the synthesis of Schiff base chitosan, the cross-linking of Schiff base chitosan, and the preparation of nanocomposite coatings. The coatings' structure and composition were analyzed using different methods, including Fourier Transform Infrared Spectroscopy - Attenuated Total Reflectance (FTIR-ATR), X-ray Diffraction (XRD), Transmission Electron Microscopy coupled with Energy Dispersive X-ray Spectroscopy (TEM-EDX), and Scanning Electron Microscopy (SEM). In addition, Electrochemical Impedance Spectroscopy (EIS) and Potentiodynamic Polarization (PDP) measurements were carried out to assess the inhibitory efficacy of chitosan crosslinked with epichlorohydrin (Cs-Ep), epichlorohydrin-crosslinked chitosan-salicylaldehyde Schiff base (CS-S-Ep) and CS-Ep-STO and CS-S-Ep-STO nanocomposite coatings, as well as the long-term protection durability of CS-S-Ep-STO. These techniques revealed a significant reduction in corrosion current density after chemical modification of chitosan and incorporation of SrTiO3 (STO) nanoparticles into CS-Ep and CS-S-Ep matrices, confirming a notable improvement in the inhibitory efficiency of these coatings against copper corrosion in a saline environment. Computational modeling methods like Density Functional Theory (DFT), Molecular Dynamics (MD), and Monte Carlo (MC) simulations reinforced these results by demonstrating efficient adsorption of CS-S-Ep-STO nanocomposites on metal surfaces through the interaction with heteroatoms present in the functional groups (-C=N-, -C-O-, -OH) and STO nanoparticles. The present study's findings provide key information for developing innovative protective coatings, highlighting the potential of chitosan-based nanocomposites and derivatives, particularly with SrTiO3 incorporation, in mitigating metal surface corrosion in aggressive environments.

Synthesis, Corrosion Inhibition, In Silico ADME, DFT, and Antibacterial Activity of Pyridine‐Based Schiff Base and Its Cu (II) Complex

ABSTRACTHerein, we report the synthesis of an (E)‐N‐(pyridine‐3‐ylmethylene)pyridine‐2‐amine Schiff base (ENppa) and its Cu (II) complex (Cu‐ENppa) using 2‐aminopyridine (2APy) and pyridine‐3‐carbaldehyde (P3C). This study aimed to investigate the ADMET profiles, electronic features, antibacterial and anticorrosion activities of the synthesized ligand, and its Cu (II) complex. The compounds were characterized using various techniques, including CHN analysis, FT‐IR, 1H and 13C NMR, MALDI‐TOF MS, ICP‐MS, SEM, TGA/DTA, UV–visible spectroscopy, and powder X‐ray diffraction (PXRD). The Cu (II) ion exhibited tetrahedral geometry in the complex by coordinating with two nitrogen atoms, one from an imine group and the other from a pyridine ring. UV–visible spectroscopy and magnetic moment data also supported this geometry. TGA/DTA revealed three stages of decomposition at 141°C°C–255°C, 255°C°C–367°C, and 549°C°C–659°C, with CuO as the final residue. PXRD analysis identified ENppa and Cu‐ENppa as nanocrystallites, with crystallinities of 82% and 49%, respectively. Both compounds were highly effective in inhibiting mild steel corrosion in acidic media, with inhibition efficiencies of 97% and 98%, respective for Cu‐ENppa and ENppa. They also exhibited favorable ADME profiles, indicating potential as drug candidates for in silico ADME studies. The antibacterial activity results demonstrated promising efficacy, with Cu‐ENppa showing higher activity than ENppa.

Synthesis, Urease Inhibitory Activity, Molecular Docking, Dynamics, MMGBSA and DFT Studies of Schiff Bases Bearing Benzimidazole Scaffold.

In this study, eleven hydrazone-Schiff bases bearing benzimidazole moiety were synthesized successfully via three step reactions and structures of these products were deduced by HR-ESI-MS, 1H-, and 13C-NMR spectroscopic techniques. Lastly, these derivatives were tested for their in vitro urease inhibitory potential. Six compounds among the series attributed excellent inhibition with IC50 values of 7.20 ± 0.59 to 19.61 ± 1.10 µM better than the reference drug thiourea (IC50 = 22.12 ± 1.20 µM). Similarly, three derivatives showed significant while two compounds showed less inhibitory effects against the urease enzyme. The molecular docking analysis was carried out to reveal the binding modes and types of interaction taking place between protein (urease) and synthesized compounds. The Density Functional Theory (DFT) calculations were performed at B3LYP/6-311++G(d,p) to check the structure stability. For the account of intramolecular interaction, the DFT-D3 and Reduced Density Gradient (RDG) analysis were performed. Furthermore, the chemical nature of all compounds was explored by TD-DFT method using CAM-B3LYP functional with 6-311++G(d,p) basis set. The dynamic simulation as well as MMGBSA studies validated the binding affinity and stability of the ligand receptor complex, displaying main interactions contributing in the biological activity of the product derivatives.

Homobimetallic Ruthenium(II) Complexes Catalysed Selective Transfer Hydrogenation of Aldehydes in Water.

Herein we report chemoselective transfer hydrogenation (TH) of aldehydes in aqueous medium using a series of homobimetallic Ru(II) catalysts. Two homobimetallic complexes (Ru1 and Ru3) and one monometallic complex (Ru2) have been employed in the catalytic reduction of aldehydes. Bimetallic complex [(p-cymene)2(RuCl)2L3] (Ru3) is obtained from the reaction of Schiff base ligand 2,2'-((1E,1'E)-((3,3',5,5'-tetraisopropyl-[1,1'-biphenyl]-4,4'diyl)bis(azaneylylidene))bis(methaneylylidene))bis(4-bromophenol) (H2L3) and characterized by various spectroscopic and analytical techniques. The use of formic acid/formate buffer as the hydride source and a catalyst loading of 0.01 mol% of Ru1 or Ru3 resulted in the conversion of various aldehydes to the corresponding alcohols in good to excellent yield. This method is very efficient for selective reduction of aldehydes in the presence of other reducible functional groups. A loading of 0.0001 mol% of Ru1 catalyst is sufficient to achieve a turnover frequency (TOF) of 5.5× 105 h-1. Furthermore, the catalyst can been recycled and reused for six consecutives cycles without sacrificing the efficiency. A comparison of results obtained between bimetallic and monometallic complexes offers valuable insights into the distinct reactivity patterns of the bimetallic complexes, presumably originating from a cooperative effect. We have explored the mechanistic pathway using DFT methods.

Synthesis, enzyme inhibition, and docking studies of new schiff bases of disalicylic acid methylene-based derivatives as dual-target antibacterial agents

IntroductionBacteria have acquired resistance to almost all antibiotics currently in use due to their extensive, broad, and improper utilization over a prolonged period. DNA gyrase and DHFR exhibit significant promise as targets for antibacterial therapeutics.MethodsWe have developed a series of disalicylic acid methylene/Schiff bases hybrids (6a-l) that function as antibacterial agents by targeting DNA gyrase and DHFR.Results and discussionThe findings showed that 6a-l have significant antibacterial activity against both Gram-positive and Gram-negative bacteria, with inhibition zones (IZ) comparable to or even higher than the reference Ciprofloxacin. MIC testing revealed that 6h and 6l were 1.5 times as effective than ciprofloxacin against S. aureus. Compounds 6h and 6l had MBC values of 28 and 33 nM for S. aureus, compared to Ciprofloxacin’s 45 nM, indicating that they are more potent bactericidal agents. The MIC values for compounds 6c, 6e, 6h, 6j, and 6l against A. flavus were between 14.50 and 19.50 µM, while the MIC value for fluconazole was 11.50 µM. Also, the studied compounds had MIC values between 18.20 and 22.90 µM against C. albicans, while Fluconazole had a MIC value of 17.50 µM. Compound 6h showed a MIC value of 1.70 µM against the clinical strain S. aureus (ATCC 43300) (MRSA), making it an effective antibacterial agent. Compounds 6h, 6j, and 6l inhibited E. coli DNA gyrase with IC50 values of 79, 117, and 87 nM, respectively, compared to the reference novobiocin (IC50 = 170 nM). Additionally, compounds 6h and 6l, the most potent E. coli gyrase inhibitors, showed encouraging results on DHFR. Compounds 6h and 6l exhibit IC50 values of 3.80 µM and 4.25 µM, respectively. These values are significantly lower and hence more effective than Trimethoprim’s IC50 of 5.20 µM.

Physicochemical characteristics and inhibition effect of curcumin-based Schiff bases on industrially important mild steel corrosion in acidic medium

Physicochemical characteristics and inhibition effect of curcumin-based Schiff bases on industrially important mild steel corrosion in acidic medium

Removal of As(V) and Cr(VI) using quinoxaline chitosan schiff base: synthesis, characterization and adsorption mechanism.

Elevated Arsenic and Chromium levels in surface and ground waters are a significant health concern in several parts of the world. Chitosan quinoxaline Schiff base (CsQ) and cross-linked chitosan quinoxaline Schiff base (CsQG) were prepared to adsorb both Arsenate [As(V)] and Chromium [Cr(VI)] ions. The thermo-gravimetric analysis (TGA), X-ray diffraction analysis (XRD), and Fourier-transform infrared spectroscopy (FTIR) were used to investigate the prepared Schiff bases (CsQ) and (CsQG). The UV-VIS spectra showed a shift in the wavelength area of the modified polymer, indicating the reaction occurrence, besides the variation of the shape and intensity of the peaks. The XRD patterns showed the incensement of the amorphous characteristic. On the other hand, the thermal stability of the modified polymers is better according to TGA studies; also, the morphology of the modified chitosan was investigated before and after crosslinking (CsQ and CsQG) using a scanning electron microscope (SEM) where the surface was fall of wrinkles and pores, which then were decreased after cross-linking. Contact time, temperature, pH, and initial metal ion concentration were all studied as factors influencing metal ion uptake behavior. The Langmuir, Temkin, Dubinin-Radushkevich, and Freundlich isotherm models were used to describe the equilibrium data using metal concentrations of 10-1000 mg/L at pH = 7 and 1 g of adsorbent. The pseudo-first-order and pseudo-second-order kinetic parameters were evaluated. The experimental data revealed that the adsorption kinetics follow the mechanism of the pseudo-second-order equation with R2 values (0.9969, 0.9061) in case of using CsQ and R2 values (0.9989, 0.9999) in case of using CsQG, demonstrating chemical sorption is the rate-limiting step of the adsorption mechanism. Comparing the adsorption efficiency of the synthesized Schiff base and the cross-linked one, it was found that CsQ is a better adsorbent than CsQG in both cases of As(V) and Cr(VI) removal. This means that cross-linking doesn't enhance the efficiency as expected, but on the contrary, in some cases, it decreases the removal. In addition, the newly modified chitosan polymers work better in As(V) removal than Cr(VI); the removal is 22.33% for Cr(VI) and 98.36% for As(V) using CsQ polymer, whereas using CsQG, the values are 6.20% and 91.75% respectively. On the other hand, the maximum adsorption capacity (Qm) for As(V) and Cr(VI) are 8.811 and 3.003 mg/g, respectively, using CsQ, while in the case of using CsQG, the Qm value reaches 31.95 mg/g for As(V), and 103.09 mg/g for Cr(VI).

PH-Responsive Modified HAMA Microspheres Regulate the Inflammatory Microenvironment of Intervertebral Discs.

Currently, intervertebral disc (IVD) degeneration is believed to lead to local accumulation of lactic acid in the IVD, a decrease in pH, activation of the inflammatory pathway, and continued destruction of homeostasis of the IVD. To address these issues, the intelligent and accurate release of drugs is particularly important. In this study, acid-sensitive release methacrylated hyaluronic acid (HAMA) microspheres were constructed by using microfluidic technology, which can be used as a targeted drug delivery system for intervertebral disc degeneration (IVDD) through Schiff base chemical bonding on the surface of the microspheres to achieve intelligent drug release. Interleukin-1 receptor antagonist (IL-1 Ra) is a naturally occurring anti-inflammatory antagonist of the interleukin-1 family of pro-inflammatory cytokines. Despite its outstanding broad-spectrum anti-inflammatory effects, IL-1 Ra has a short biological half-life (4-6 h). The slow-release performance of IL-1 Ra can be greatly improved using bovine serum albumin nanoparticles (BNP). In addition, the modified HAMA microspheres exhibited good injectability and porosity, and efficient and uniform loading of nanoparticles was achieved via the Schiff base bond. The inflammatory microenvironment can be significantly reversed by transporting the modified HAMA microspheres-BNPs (Modified MS) to the degenerative nucleus pulposus.