Scanning Transmission X-ray Microscopy Research Articles

Microbial Surface Confined Growth Strategy for the Synthesis of Highly Loaded NiCoP Nanoparticles with Hollow Derived Carbon Shells for Sodium Ion Capture.

NiCoP is considered to be a very promising material for sodium ion (Na+) capturing, however, the volume expansion and poor cyclic stability of NiCoP during the storage limit its application. In response to these limitations, Finite element simulations are used to help in the rational design of the NiCoP structure. A novel microbial surface confined growth strategy is employed to synthesize highly loaded NiCoP nanoparticles (NiCoP NPs) supported on hollow derived carbon shells (NPC), constructing a stable composite structure known as NiCoP@NPC. The highly loaded and uniformly dispersed NiCoP NPs are anchored in-situ and fully exposed, enabling enhanced electron and ion transport efficiency and thereby boosting pseudocapacitance. The NPC from yeast played a crucial role in mitigating the volume expansion of NiCoP NPs, thereby enhancing the structural stability of the electrode. Consequently, NiCoP@NPC demonstrated a high Na+ storage capacity of 59.70 ± 1.51 mg g-1 at 1.6 V and maintained good cycling stability, retaining over 73.3% of its capacity after 80 cycles at 1.6 V. Scanning transmission X-ray microscopy (STXM) analysis confirmed the reversible conversion reaction mechanism and the robust structure of NiCoP@NPC before and after the reaction; Density function theory (DFT) and electrochemical quartz crystal microbalance (EQCM-D) further confirmed that the structural design of NiCoP@NPC promoted electron transport, Na+ adsorption as well as improved cycling stability. This study is intended to provide a new idea for the in-situ confined synthesis of metal phosphides electrodes with stable performance and structure.

Phase-separated polymer blends for controlled drug delivery by tuning morphology

Controlling drug release rate and providing physical and chemical stability to the active pharmaceutical ingredient are key properties of oral solid dosage forms. Here, we demonstrate a formulation strategy using phase-separated polymer blends where the morphology provides a route for tuning the drug release profile. By utilising phase separation of a hydrophobic and a hydrophilic polymer, the hydrophilic component will act as a channelling agent, creating a porous network upon dissolution that will dictate the release characteristics. With ptychographic X-ray tomography and scanning transmission X-ray microscopy we reveal how the morphology depends on both polymer fraction and presence of drug, and how the drug is distributed over the polymer domains. Combining X-ray imaging results with dissolution studies reveal how the morphologies are correlated with the drug release and showcase how tuning the morphology of a polymer matrix in oral formulations can be utilised as a method for controlled drug release.

Scanning Transmission Soft X-Ray Microscopy Probes Topical Drug Delivery of Rapamycin Facilitated by Microneedles.

Scanning Transmission X-ray microscopy (STXM) is a sensitive and selective probe for the penetration of rapamycin which is topically applied to human skin ex vivo and is facilitated by skin treatment with microneedles puncturing the skin. Inner-shell excitation serves as a selective probe for detecting rapamycin by changes in optical density as well as linear combination modeling using reference spectra of the most abundant species. The results indicate that mechanical damage induced by microneedles allows this drug to accumulate in the stratum corneum without reaching the viable skin layers. This is unlike intact skin which shows no drug penetration at all and underscores the mechanical impact of microneedle skin treatment. These results are compared to drug penetration profiles of other drugs highlighting the importance of skin barriers. High spatial resolution studies also indicate that the lipophilic drug rapamycin is observed in corneocytes. Attempts in data evaluation are reported to probe rapamycin also in the lipid layers between the corneocytes, which was not accomplished before. These results are compared to recent results on rapamycin uptake in skin where barrier impairment was induced by pre-treatment with the enzyme trypsin and drug formulations leading to occlusion.

Soft X-ray spectromicroscopic proof of a reversible oxidation/reduction of microbial biofilm structures using a novel microfluidic in situ electrochemical device

In situ electrochemistry on micron and submicron-sized individual particles and thin layers is a valuable, emerging tool for process understanding and optimization in a variety of scientific and technological fields such as material science, process technology, analytical chemistry, and environmental sciences. Electrochemical characterization and manipulation coupled with soft X-ray spectromicroscopy helps identify, quantify, and optimize processes in complex systems such as those with high heterogeneity in the spatial and/or temporal domain. Here we present a novel platform optimized for in situ electrochemistry with variable liquid electrolyte flow in soft X-ray scanning transmission X-ray microscopes (STXM). With four channels for fluid control and a modular design, it is suited for a wealth of experimental conditions. We demonstrate its capabilities by proving the reversible oxidation and reduction of individual microbial biofilm structures formed by microaerophilic Fe(II)-oxidizing bacteria, also known as twisted stalks. We show spectromicroscopically the heterogeneity of the redox activity on the submicron scale. Examples are also provided of electrochemical modification of liquid electrolyte species (Fe(II) and Fe(III) cyanides), and in situ studies of electrodeposited copper nanoparticles as CO2 reduction electrocatalysts under reaction conditions.

Unraveling chemical origins of dendrite formation in zinc-ion batteries via in situ/operando X-ray spectroscopy and imaging

To prevent zinc (Zn) dendrite formation and improve electrochemical stability, it is essential to understand Zn dendrite growth, particularly in terms of morphology and relation with the solid electrolyte interface (SEI) film. In this study, we employ in-situ scanning transmission X-ray microscopy (STXM) and spectro-ptychography to monitor the morphology evolution of Zn dendrites and to identify their chemical composition and distribution on the Zn surface during the stripping/plating progress. Our findings reveal that in 50 mM ZnSO4, the initiation of moss/whisker dendrites is chemically controlled, while their continued growth over extended cycles is kinetically governed. The presence of a dense and stable SEI film is critical for inhibiting the formation and growth of Zn dendrites. By adding 50 mM lithium chloride (LiCl) as an electrolyte additive, we successfully construct a dense and stable SEI film composed of Li2S2O7 and Li2CO3, which significantly improves cycling performance. Moreover, the symmetric cell achieves a prolonged cycle life of up to 3900 h with the incorporation of 5% 12-crown-4 additives. This work offers a strategy for in-situ observation and analysis of Zn dendrite formation mechanisms and provides an effective approach for designing high-performance Zn-ion batteries.

Synergistic ultra-high adsorption and oxidation of arsenic in groundwater by iron-modified biochar: Mechanisms and potential application

This study explores the potential of low-cost biochar modified with ferrihydrite and goethite for the remediation of heavily As-polluted groundwater. Combining batch experiments and synchrotron radiation-based characterization, we investigated the mechanisms of As(III) adsorption and oxidation. The modified biochars exhibited significant adsorption capacities, achieving fitted qmax of 45.7 ± 3.9 mg/g for ferrihydrite-modified biochar (FhGM) and 20.2 ± 1.5 mg/g for goethite-modified biochar (GtGM) at a dosage of 1.0 g/L and an initial concentration of 10 mg/L As(III) over 24 h. Biochar facilitated approximately 30 % As(V) generation from As(III) due to enhanced electron transfer. Moreover, over 90 % of As(III) was oxidized to As(V) following the addition of H2O2, with scanning transmission X-ray microscopy revealing the distribution of As(III), and As(V) on the solid phase. In the GtGM-H2O2 system, reactive oxidation species, primarily O2•–, served as the main oxidant. In the FhGM-H2O2 system, Fe(IV) likely acted as the primary oxidizing agent. Column experiments with 0.64 g of FhGM demonstrated that, when treating 50 mg/L As-contaminated groundwater, the effluent total As concentration remained below the maximum allowable limit of 10 μg/L after 21 h. Furthermore, in the presence of H2O2, the system managed to treat 200 mg/L As-contaminated groundwater, and the effluent total As concentration exceeded 10 μg/L after 11 h. This study provides valuable insights and practical results for the remediation of high-concentration arsenic-contaminated groundwater, highlighting the effectiveness of iron-modified biochar in this application.

Comparison of soft X-ray spectro-ptychography and scanning transmission X-ray microscopy

Over the past decade advances in instrumentation and software have enabled development of spectro-ptychography (SP) as a higher spatial resolution extension of scanning transmission X-ray microscopy (STXM). Direct comparisons are made of same-area chemical state imaging of Cu nanoparticles using STXM and SP in order to compare and contrast the two approaches. We show that SP gives very similar chemical state information as STXM with significantly better spatial resolution and much higher quality images and chemical maps, on account of finer pixels in the reconstructed images. When defocused spot sizes are used (i.e., 1–3 μm, as opposed to full-focus 30–50 nm) SP data acquisition is faster and the radiation dose delivered to the sample is smaller than the corresponding STXM measurement. The limitations of SP are primarily related to the time and complexity of the ptychographic reconstruction. We argue that these documented advantages mean that SP rather than STXM should be used for more complex studies such as tomography and in situ studies, especially when radiation damage is a concern. The main point of this manuscript is to illustrate, with scientifically relevant samples, the significant advantages of SP relative to conventional STXM, with the goal of encouraging greater use of SP.

Reduced CO2 Release from Arctic Soils Due to CO2 Binding to Calcium Forming Aragonite.

Arctic soils are the largest pool of organic carbon compared with other soils globally and serve as a main source for greenhouse gases, especially in the course of the predicted future temperature increase. With increasing temperatures, substantial thawing of the permafrost layer of soils is expected, altering the availability of calcium in those soils, with an increase by ∼5 mg Ca g-1 DW predicted for Alaska. Here we show for two representative soils in Alaska (initially Ca-poor or Ca-rich) that this increase in Ca availability will lead to decreases in CO2 release by 50% and 57%. It is already well-known that the cation bridging of Ca ions to organic carbon renders this carbon unavailable for microbial respiration and that Ca is altering the transformation of Corg by microbes. Here we show that the decrease of the soil CO2 release may be also due to enhanced aragonite formation (by 300% for Ca-poor and 90-200% for Ca-rich soils), as revealed by synchrotron-based scanning transmission X-ray microscopy. We therefore call upon field experiments for validation of this process and inclusion of this process in global and local carbon budget models.

Investigation of the spatial distribution of sodium in bread microstructure using X-ray, light and electron microscopy

The sodium consumption in many countries is too high, which results in increased risk for hypertension, cardiovascular diseases, stroke and premature death. Inhomogeneous sodium distribution using layering is a viable way to reduce sodium in bread that normally contains a lot of sodium. Prevention of sodium migration during production and storage is important for the function of this approach. Furthermore, the distribution of sodium between starch and gluten influences their properties. The spatial distribution of sodium was investigated at high resolution using combinations of X-ray fluorescence microscopy (XFM), scanning transmission X-ray microscopy (STXM), light microscopy (LM), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX) and image analysis. Reference breads and layered bread samples were baked with one salt-free layer and one layer containing 3.6 wt% sodium chloride salt. The obtained results showed that the concentration of sodium is higher in the starch phase than in the gluten phase and that sodium migrates across the layer interface from the salt-containing to the salt-free layer. The ratios between the sodium concentration in the starch and gluten phases were dependent on the sodium concentration across the interfaces. Furthermore, magnesium and phosphor signals in bread yeast cells were observed using XFM.

Energy storage chemistry: Atomic and electronic fundamental understanding insights for high-performance supercapacitors

The scarcity of fuels, high pollution levels, climate change, and other major environmental issues are critical challenges that modern societies are facing, mostly originating from fossil fuels-based economies. These challenges can be addressed by developing green, eco-friendly, inexpensive energy sources and energy storage devices. Electrochemical energy storage materials possess high capacitance and superior power density. To engineer highly efficient next-generation electrochemical energy storage devices, the mechanisms of electrochemical reactions and redox behavior must be probed in operational environments. They can be studied by investigating atomic and electronic structures using in situ x-ray absorption spectroscopy (XAS) analysis. Such a technique has attracted substantial research and development interest in the field of energy science for over a decade. The mechanisms of charge/discharge, carrier transport, and ion intercalation/deintercalation can be elucidated. Supercapacitors generally store energy by two specific mechanisms—pseudocapacitance and electrochemical double-layer capacitance. In situ XAS is a powerful tool for probing and understanding these mechanisms. In this Review, both soft and hard x rays are used for the in situ XAS analysis of various representative electrochemical energy storage systems. This Review also showcases some of the highly efficient energy and power density candidates. Furthermore, the importance of synchrotron-based x-ray spectroscopy characterization techniques is enlightened. The impact of the electronic structure, local atomic structure, and electronically active elements/sites of the typical electrochemical energy storage candidates in operational conditions is elucidated. Regarding electrochemical energy storage mechanisms in their respective working environments, the unknown valence states and reversible/irreversible nature of elements, local hybridization, delocalized d-electrons spin states, participation of coordination shells, disorder, and faradaic/non-faradaic behavior are thoroughly discussed. Finally, the future direction of in situ XAS analysis combined with spatial chemical mapping from operando scanning transmission x-ray microscopy and other emerging characterization techniques is presented and discussed.

Nanoscale synchrotron x-ray analysis of intranuclear iron in melanised neurons of Parkinson’s substantia nigra

Neuromelanin-pigmented neurons of the substantia nigra are selectively lost during the progression of Parkinson’s disease. These neurons accumulate iron in the disease state, and iron-mediated neuron damage is implicated in cell death. Animal models of Parkinson’s have evidenced iron loading inside the nucleoli of nigral neurons, however the nature of intranuclear iron deposition in the melanised neurons of the human substantia nigra is not understood. Here, scanning transmission x-ray microscopy (STXM) is used to probe iron foci in relation to the surrounding ultrastructure in melanised neurons of human substantia nigra from a confirmed Parkinson’s case. In addition to the expected neuromelanin-bound iron, iron deposits are also associated with the edge of the cell nucleolus. Speciation analysis confirms these deposits to be ferric (Fe3+) iron. The function of intranuclear iron in these cells remains unresolved, although both damaging and protective mechanisms are considered. This finding shows that STXM is a powerful label-free tool for the in situ, nanoscale chemical characterisation of both organic and inorganic intracellular components. Future applications are likely to shed new light on incompletely understood biochemical mechanisms, such as metal dysregulation and morphological changes to cell nucleoli, that are important in understanding the pathogenesis of Parkinson’s.

Effect of Oxidation on Vivianite Dissolution Rates and Mechanism.

The interest in the mineral vivianite (Fe3(PO4)2·8H2O) as a more sustainable P resource has grown significantly in recent years owing to its efficient recovery from wastewater and its potential use as a P fertilizer. Vivianite is metastable in oxic environments and readily oxidizes. As dissolution and oxidation occur concurrently, the impact of oxidation on the dissolution rate and mechanism is not fully understood. In this study, we disentangled the oxidation and dissolution of vivianite to develop a quantitative and mechanistic understanding of dissolution rates and mechanisms under oxic conditions. Controlled batch and flow-through experiments with pristine and preoxidized vivianite were conducted to systematically investigate the effect of oxidation on vivianite dissolution at various pH-values and temperatures. Using X-ray absorption spectroscopy and scanning transmission X-ray microscopy techniques, we demonstrated that oxidation of vivianite generated a core-shell structure with a passivating oxidized amorphous Fe(III)-PO4 surface layer and a pristine vivianite core, leading to diffusion-controlled oxidation kinetics. Initial (<1 h) dissolution rates and concomitant P and Fe release (∼48 h) decreased strongly with increasing degree of oxidation (0-≤ 100%). Both increasing temperature (5-75 °C) and pH (5-9) accelerated oxidation, and, consequently, slowed down dissolution kinetics.

(Invited) In Situ x-Ray Spectroscopy for Energy Materials

In response to the worldwide surge in energy demand, the materials scientists devote themselves to the search for clean and sustainable energy. Without the development of cutting-edge renewable energy materials, going green has never been simple. The zero-emission future requires a multifaceted approach. Advanced functional materials for more effective energy conversion, storage, and conservation are the universal focus of energy research. Although the ideas for increasing the efficiency of current energy materials in terms of energy conversion, storage, or conservation are clear and straightforward, they are technically challenging. It is difficult to better engineer materials in an efficient manner for a practical use without knowing the fundamental atomic and electronic structures, particularly how they respond under operating conditions. Synchrotron x-ray spectroscopies, including x-ray absorption and emission spectroscopies are powerful tools to study the local unoccupied and occupied electronic states. In addition, employing the in situ technique permits us to monitor the atomic and electronic structure modulations of the energy material at work. An emerging x-ray spectro-microscopic technique, scanning transmission x-ray microscopy, which provides spatially resolved x-ray spectroscopy. The significance of utilizing x-ray spectroscopy for the atomic and electronic structure characterization of several significant energy material systems, such as advanced nanocatalysts, artificial photosynthesis materials, and smart materials, will be discussed in this presentation. Recent developments of in situ technique, a number of recent studies, and energy science-related Tamkang University (TKU) end-stations at the BL45A and BL27A of TPS will also be presented.

(Battery Student Slam 8 Award Winner) Multi-Clustered Lithium Diffusion in Single-Crystalline NMC Battery Particles

Understanding the diffusion dynamics of lithium within solid-state electrodes is pivotal for developing high-performance batteries. In this context, layered oxides were utilized as a promising cathode material due to their high energy density and fast intraparticle lithium diffusivity. Despite advancements in material composition, coating, and doping, the understanding of intraparticle lithium diffusion has long been described by Fick's law. Conventionally, lithium diffusion is assumed to generate a monotonic lithium concentration gradient within solid-solution single-crystalline battery materials during cycling. This raises fundamental questions about diffusion in layered oxides; (1) Can the diffusion of Li in solids be interpreted as Fickian diffusion, similar to diffusion in gases or liquids, even though it involves structural and phase evolution throughout the battery cycle? and, (2) Does the fast diffusivity (10-11-10-9 cm2/s) support the homogenization of Li?In this study, we address these questions surrounding lithium diffusion in layered oxide by utilizing operando scanning transmission X-ray microscopy. We revealed the formation of mobile Li-dense/-dilute nano-domains within individual single-crystalline LiNi1/3Mn1/3Co1/3O2 (scNMC) during battery cycles. We term this phenomenon ‘multi-clustered lithium diffusion’, distinguishing our findings from the conventionally suggested Fickian diffusion model in solid-solution materials. These domains persist for at least 4 hours during relaxation, accompanied by locally residing strained domains, as confirmed by Bragg coherent diffraction imaging (BCDI), within a single particle. We believe these domains arise due to the compensation of localized chemical potential gradients that are generated by the sustained presence of strain within the battery particles during cycling.While maintaining integrity of Li-dense/-dilute domain at various C-rates, STXM result further show that Li-dilute domains maintain during the discharging. Given the lower concentration of Li at insertion boundaries, which could lower the surface charge transfer impedance of the system, Li-dilute domains facilitate lithium transport by functioning as low-resistance pathways. Through a comprehensive analysis of electrical impedance spectroscopy (EIS), STXM imaging and finite element analysis (FEA), we showed that controlling the local domain fraction is crucial for controlling the overpotential during subsequent charging. Our study introduces new insights into nanoscale solid-state diffusion, thereby enabling the fabrication of high-performance batteries. Figure 1

Engineering Thin Films of Silicon Phthalocyanines for Organic Thin Film Transistors

Metal phthalocyanines (MPc) show great promise as semiconductors due to their exceptional optoelectronic properties, high thermal and photochemical stability, and ability to be easily synthesized and functionalized for specific applications. The metal/metalloid ion in the center of the MPc ring can significantly influence the electronic, optical, and magnetic properties of the compound, as well as its solubility and stability. The majority of MPc, such as copper phthalocyanine (CuPc) are used as hole-transport materials (p-type) in organic electronics. Silicon phthalocyanines (R2-SiPc) are emerging semiconductors which predominantly moves electrons and have led to high performance n-type organic thin-film transistors (OTFTs). Their low synthetic complexity paired with their versatile axial group facilitates the finetuning of their chemical properties, solution properties and processing characteristics without significantly affecting their frontier orbital levels or their absorption properties. The crystal engineering and film forming characteristics of R2-SiPc semiconductors can be tuned through appropriate axial group functionalization, therefore facilitating their integration into both OTFTs and OPVs by solution processing or vapor deposition.Our group has developed families of R2-SiPc and integrated them into OTFTs with an emphasis on thin film processing and engineering of the interfaces for improved device performance. We have established structure property relationships of the final device performance as a function of 1) R2-SiPc axial groups and peripheral groups, 2) surface chemistry and composition and 3) thin film deposition conditions. I will also be discussing our recent work using advanced film characterization such as polarized Raman microscopy and synchrotron based scanning transmission x-ray microscopy to evaluate the resulting films and optimize the OTFT performance. Figure 1

Clustering Methods for the Characterization of Synchrotron Radiation X‐Ray Fluorescence Images of Human Carotid Atherosclerotic Plaque

This study employs computational algorithms to automatically identify and classify features in X‐Ray fluorescence (XRF) microscopy images. Principal component analysis (PCA) and unsupervised machine learning algorithms, such as Gaussian mixture (GM) clustering, are implemented to label features on a collection of XRF maps of human atherosclerotic plaque samples. The investigation involves the hard X‐Ray nanoprobe (NanoMAX) at MAX IV synchrotron radiation facility, utilizing scanning transmission X‐Ray microscopy (STXM) and XRF techniques. The analysis covers regions of interest scanned by the beam with a step size of 200 nm, yielding XRF maps of elements like calcium, iron, and zinc. These maps reveal intricate structures unsuitable for manual labeling. However, they can be accurately classified in an automated fashion using GM. Prior to clustering, PCA is used to deal with repeated patterns and background areas. The resulting clusters are associated with different types of features, which can be identified as specific tissues confirmed by histology. Regions of high concentrations of phosphorus, sulfur, calcium, and iron are found in the samples. These regions are also observed in the STXM results as spots of low transmission that typically are associated with calcium deposits only.

Direct evidence from STXM analysis of enhanced oxygen storage capacity in ceria through the addition of Cu and Mg: Correlation of HT-WGS reaction performance

Here, scanning transmission X-ray microscopy (STXM) analysis was utilized to directly present visual evidence of changes in oxygen storage capacity (OSC) when small amounts of an additive were incorporated into CeO2. Specifically, the chemical map measured by STXM analysis differentiated between Cu-rich and Ce-rich areas to derive the proportion of Ce3+. Additionally, we found that the dispersion of Cu significantly influenced the formation of OSC. The findings were applied to the high-temperature water–gas shift reaction for producing high-purity hydrogen from waste-derived syngas, establishing a correlation with catalyst performance. Consequently, the CCM75 (Ce/Mg = 75/25) catalyst demonstrated the highest Cu dispersion and OSC values (6.9 %, 800.3 μmolO/gcat), and it also showed the highest CO conversion (79 % at 450 °C) and stability (−7.7 % at 450 °C after 50 h), attributed to the significant presence of active Cu. This study confirms previously reported interactions between Cu and CeO2 and uncovers the significant roles of Cu and Mg in this catalysis system, providing new understanding of the mechanisms that facilitate OSC improvement.

Visualizing alpha-synuclein and iron deposition in M83 mouse model of Parkinson's disease in vivo.

Abnormal alpha-synuclein (αSyn) and iron accumulation in the brain play an important role in Parkinson's disease (PD). Herein, we aim to visualize αSyn inclusions and iron deposition in the brains of M83 (A53T) mouse models of PD in vivo. The fluorescent pyrimidoindole derivative THK-565 probe was characterized by means of recombinant fibrils and brains from 10- to 11-month-old M83 mice. Concurrent wide-field fluorescence and volumetric multispectral optoacoustic tomography (vMSOT) imaging were subsequently performed in vivo. Structural and susceptibility weighted imaging (SWI) magnetic resonance imaging (MRI) at 9.4 T as well as scanning transmission x-ray microscopy (STXM) were performed to characterize the iron deposits in the perfused brains. Immunofluorescence and Prussian blue staining were further performed on brain slices to validate the detection of αSyn inclusions and iron deposition. THK-565 showed increased fluorescence upon binding to recombinant αSyn fibrils and αSyn inclusions in post-mortem brain slices from patients with PD and M83 mice. Administration of THK-565 in M83 mice showed higher cerebral retention at 20 and 40 min post-intravenous injection by wide-field fluorescence compared to nontransgenic littermate mice, in congruence with the vMSOT findings. SWI/phase images and Prussian blue indicated the accumulation of iron deposits in the brains of M83 mice, presumably in the Fe3+ form, as evinced by the STXM results. In conclusion, we demonstrated in vivo mapping of αSyn by means of noninvasive epifluorescence and vMSOT imaging and validated the results by targeting the THK-565 label and SWI/STXM identification of iron deposits in M83 mouse brains ex vivo.

Revisiting Li-CO2/O2 battery chemistry through the spatial distributions of discharge products and their oxidation behaviors

Li-CO2/O2 batteries present a promising strategy for CO2 conversion and energy storage, yet the complexity of discharge products poses challenges for revealing their oxidation. Here, we simulate the influences of various properties of Li2CO3 and/or Li2O2 on the decomposition pathway by comprehensively analyzing the singlet O2 (1O2) and gas components (O2 and CO2) generated during electrochemical oxidation. Our results show that no matter Li2CO3 or Li2O2, the decomposition of samples with small size and poor crystallinity produces less 1O2 and more gas product. Especially, small and poorly crystalline Li2CO3 triggers the concurrent decomposition of Li2CO3 and C, while large and highly crystalline Li2CO3 favors the solo decomposition pathway. Furthermore, the 1O2 yield can be most inhibited at a Li2CO3/Li2O2 ratio of 50 %. After clarifying the nature of Li2CO3 and/or Li2O2 oxidation, the spatial distributions of the oxygen discharge product in Li-CO2/O2 batteries were observed by scanning transmission X-ray microscopy (STXM). Li2CO3 is mainly distributed in the interior of large aggregates with high crystallinity. Poorly crystalline Li2O2 appears as small particles or coats on the surface of Li2CO3. Combined with multi-dimensional information of the discharge products and simulation results, the oxidation behaviors of the discharge products in Li-CO2/O2 batteries are reacquainted.

In Situ Studies of Cu Catalyzed CO2 Electro-Reduction by Soft X-ray Scanning Transmission X-ray Microscopy and Soft X-ray Spectro-Ptychography

In Situ Studies of Cu Catalyzed CO2 Electro-Reduction by Soft X-ray Scanning Transmission X-ray Microscopy and Soft X-ray Spectro-Ptychography