Scanning Transmission Electron Microscopy Mass Research Articles

Structural studies of the endogenous spliceosome - The supraspliceosome.

Pre-mRNA splicing is executed in mammalian cell nuclei within a huge (21MDa) and highly dynamic molecular machine - the supraspliceosome - that individually package pre-mRNA transcripts of different sizes and number of introns into complexes of a unique structure, indicating their universal nature. Detailed structural analysis of this huge and complex structure requires a stepwise approach using hybrid methods. Structural studies of the supraspliceosome by room temperature electron tomography, cryo-electron tomography, and scanning transmission electron microscope mass measurements revealed that it is composed of four native spliceosomes, each resembling an in vitro assembled spliceosome, which are connected by the pre-mRNA. It also elucidated the arrangement of the native spliceosomes within the intact supraspliceosome. Native spliceosomes and supraspliceosomes contain all five spliceosomal U snRNPs together with other splicing factors, and are active in splicing. The structure of the native spliceosome, at a resolution of 20Å, was determined by cryo-electron microscopy, and a unique spatial arrangement of the spliceosomal U snRNPs within the native spliceosome emerged from in silico studies. The supraspliceosome also harbor components for all pre-mRNA processing activities. Thus the supraspliceosome - the endogenous spliceosome - is a stand-alone complete macromolecular machine capable of performing splicing, alternative splicing, and encompass all nuclear pre-mRNA processing activities that the pre-mRNA has to undergo before it can exit from the nucleus to the cytoplasm to encode for protein. Further high-resolution cryo-electron microscopy studies of the endogenous spliceosome are required to decipher the regulation of alternative splicing, and elucidate the network of processing activities within it.

α-Synuclein Amyloid Fibrils with Two Entwined, Asymmetrically Associated Protofibrils

Parkinson disease and other progressive neurodegenerative conditions are characterized by the intracerebral presence of Lewy bodies, containing amyloid fibrils of α-synuclein. We used cryo-electron microscopy and scanning transmission electron microscopy (STEM) to study in vitro-assembled fibrils. These fibrils are highly polymorphic. Focusing on twisting fibrils with an inter-crossover spacing of 77 nm, our reconstructions showed them to consist of paired protofibrils. STEM mass per length data gave one subunit per 0.47 nm axial rise per protofibril, consistent with a superpleated β-structure. The STEM images show two thread-like densities running along each of these fibrils, which we interpret as ladders of metal ions. These threads confirmed the two-protofibril architecture of the 77-nm twisting fibrils and allowed us to identify this morphotype in STEM micrographs. Some other, but not all, fibril morphotypes also exhibit dense threads, implying that they also present a putative metal binding site. We propose a molecular model for the protofibril and suggest that polymorphic variant fibrils have different numbers of protofibrils that are associated differently.

Development and application of STEM for the biological sciences

The design of the scanning transmission electron microscope (STEM), as conceived originally by Crewe and coworkers, enables the highly efficient and flexible collection of different elastic and inelastic signals resulting from the interaction of a focused probe of incident electrons with a specimen. In the present paper we provide a brief review for how the STEM today can be applied towards a range of different problems in the biological sciences, emphasizing four main areas of application. (1) For three decades, the most widely used STEM technique has been the mass determination of proteins and other macromolecular assemblies. Such measurements can be performed at low electron dose by collecting the high-angle dark-field signal using an annular detector. STEM mass mapping has proven valuable for characterizing large protein assemblies such as filamentous proteins with a well-defined mass per length. (2) The annular dark-field signal can also be used to image ultrasmall, functionalized nanoparticles of heavy atoms for labeling specific amino-acid sequences in protein assemblies. (3) By acquiring electron energy loss spectra (EELS) at each pixel in a hyperspectral image, it is possible to map the distributions of specific bound elements like phosphorus, calcium and iron in isolated macromolecular assemblies or in compartments within sectioned cells. Near single atom sensitivity is feasible provided that the specimen can tolerate a very high incident electron dose. (4) Electron tomography is a new application of STEM that enables three-dimensional reconstruction of micrometer-thick sections of cells. In this technique a probe of small convergence angle gives a large depth of field throughout the thickness of the specimen while maintaining a probe diameter of <2 nm; and the use of an on-axis bright-field detector reduces the effects of beam broadening and thus improves the spatial resolution compared to that attainable by STEM dark-field tomography.

Amyloid structure and assembly: Insights from scanning transmission electron microscopy

Amyloid fibrils are filamentous protein aggregates implicated in several common diseases such as Alzheimer's disease and type II diabetes. Similar structures are also the molecular principle of the infectious spongiform encephalopathies such as Creutzfeldt-Jakob disease in humans, scrapie in sheep, and of the so-called yeast prions, inherited non-chromosomal elements found in yeast and fungi. Scanning transmission electron microscopy (STEM) is often used to delineate the assembly mechanism and structural properties of amyloid aggregates. In this review we consider specifically contributions and limitations of STEM for the investigation of amyloid assembly pathways, fibril polymorphisms and structural models of amyloid fibrils. This type of microscopy provides the only method to directly measure the mass-per-length (MPL) of individual filaments. Made on both in vitro assembled and ex vivo samples, STEM mass measurements have illuminated the hierarchical relationships between amyloid fibrils and revealed that polymorphic fibrils and various globular oligomers can assemble simultaneously from a single polypeptide. The MPLs also impose strong constraints on possible packing schemes, assisting in molecular model building when combined with high-resolution methods like solid-state nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR).

Growth of Collagen Fibril Seeds from Embryonic Tendon: Fractured Fibril Ends Nucleate New Tip Growth

Collagen fibrils are the principal tensile element of vertebrate tissues where they occur in the extracellular matrix as spatially organised arrays. A major challenge is to understand how the mechanisms of nucleation, growth and remodelling yield fibrils of tissue-specific diameter and length. Here we have developed a seeding system whereby collagen fibrils were isolated from avian embryonic tendon and added to purified collagen solution, in order to characterise fibril surface nucleation and growth mechanisms. Fragmentation of tendon in liquid nitrogen followed by Dounce homogenisation generated fibril length fragments. Most (>94%) of the fractured ends of fibrils, which show an abrupt square profile, were found to act as nucleation sites for further growth by molecular accretion. The mechanism of this nucleation and growth process was investigated by transmission electron microscopy, atomic force microscopy and scanning transmission electron microscopy mass mapping. Typically, a single growth spur occurred on the N-terminal end of seed fibrils whilst twin spurs frequently formed on the C-terminal end before merging into a single tip projection. The surface nucleation and growth process generated a smoothly tapered tip that achieved maximum diameter when the axial extension reached ∼13 μm. Lateral growth also occurred along the entire length of all seed fibrils that contained tip projections. The data support a model of collagen fibril growth in which the broken ends of fibrils are nucleation sites for propagation in opposite axial directions. The observed fibril growth behaviour has direct relevance to tendon matrix remodelling and repair processes that might involve rupture of collagen fibrils.

Pentameric Assembly of Potassium Channel Tetramerization Domain-Containing Protein 5

We report the X-ray crystal structure of human potassium channel tetramerization domain-containing protein 5 (KCTD5), the first member of the family to be so characterized. Four findings were unexpected. First, the structure reveals assemblies of five subunits while tetramers were anticipated; pentameric stoichiometry is observed also in solution by scanning transmission electron microscopy mass analysis and analytical ultracentrifugation. Second, the same BTB ( bric-a-brac, tramtrack, broad complex) domain surface mediates the assembly of five KCTD5 and four voltage-gated K + (Kv) channel subunits; four amino acid differences appear crucial. Third, KCTD5 complexes have well-defined N- and C-terminal modules separated by a flexible linker that swivels by ∼ 30 o; the C-module shows a new fold and is required to bind Golgi reassembly stacking protein 55 with ∼ 1 μM affinity, as judged by surface plasmon resonance and ultracentrifugation. Fourth, despite the homology reflected in its name, KCTD5 does not impact the operation of Kv4.2, Kv3.4, Kv2.1, or Kv1.2 channels.

Quantitative STEM mass measurement of biological macromolecules in a 300 kV TEM

For almost four decades, the scanning transmission electron microscope (STEM) has made significant contributions to structural biology by providing accurate determinations of the molecular masses of large protein assemblies that have arbitrary shapes and sizes. Nevertheless, STEM mass mapping has been implemented in very few laboratories, most of which have employed cold field-emission gun (FEG) electron sources operating at acceleration voltages of 100 kV and lower. Here we show that a 300 kV commercial transmission electron microscope (TEM) equipped with a thermally assisted Shottky FEG can also provide accurate STEM mass measurements. Using the recently published database of elastic-scattering cross sections from the National Institute of Standards and Technology, we show that the measured absolute mass values for tobacco mosaic virus and limpet hemocyanin didecamers agree with the known values to within better than 10%. Applying the established approach, whereby tobacco mosaic virus is added to a specimen as a calibration standard, we find that the measured molecular weight of the hemocyanin assemblies agrees with the known value to within 3%. This accuracy is achievable although only a very small fraction ( approximately 0.002) of the incident probe current of 300 kV electrons is scattered onto the annular dark-field STEM detector. FEG TEMs operating at intermediate voltages (200-400 kV) are becoming common tools for determining the structure of frozen hydrated protein assemblies. The ability to perform mass determination with the same instrument can provide important complementary information about the numbers of subunits comprising the protein assemblies whose structure is being studied.

Structure of Halothiobacillus neapolitanus Carboxysomes by Cryo-electron Tomography

Carboxysomes are polyhedral bodies consisting of a proteinaceous shell filled with ribulose 1,5-bisphosphate carboxylase/oxygenase (RuBisCO). They are found in the cytoplasm of all cyanobacteria and some chemoautotrophic bacteria. Previous studies of Halothiobacillus neapolitanus and Nitrobacter agilis carboxysomes suggest that the structures are either icosahedral or dodecahedral. To determine the protein shell structure more definitively, purified H. neapolitanus carboxysomes were re-examined by cryo-electron tomography and scanning transmission electron microscopy (STEM). Due to the limited tilt angles in the electron microscope, the tomographic reconstructions are distorted. Corrections were made in the 3D orientation searching and averaging of the computationally extracted carboxysomes to minimize the missing data effects. It was found that H. neapolitanus carboxysomes vary widely in size and mass as shown by cryo-electron tomography and STEM mass measurements, respectively. We have aligned and averaged carboxysomes in several size classes from the 3D tomographic reconstruction by methods that are not model-biased. The averages reveal icosahedral symmetry of the shell, but not of the density inside it, for all the size classes.

Architecture of Ure2p Prion Filaments: THE N-TERMINAL DOMAINS FORM A CENTRAL CORE FIBER

The [URE3] prion is an inactive, self-propagating, filamentous form of the Ure2 protein, a regulator of nitrogen catabolism in yeast. The N-terminal "prion" domain of Ure2p determines its in vivo prion properties and in vitro amyloid-forming ability. Here we determined the overall structures of Ure2p filaments and related polymers of the prion domain fused to other globular proteins. Protease digestion of 25-nm diameter Ure2p filaments trimmed them to 4-nm filaments, which mass spectrometry showed to be composed of prion domain fragments, primarily residues approximately 1-70. Fusion protein filaments with diameters of 14-25 nm were also reduced to 4-nm filaments by proteolysis. The prion domain transforms from the most to the least protease-sensitive part upon filament formation in each case, implying that it undergoes a conformational change. Intact filaments imaged by cryo-electron microscopy or after vanadate staining by scanning transmission electron microscopy (STEM) revealed a central 4-nm core with attached globular appendages. STEM mass per unit length measurements of unstained filaments yielded 1 monomer per 0.45 nm in each case. These observations strongly support a unifying model whereby subunits in Ure2p filaments, as well as in fusion protein filaments, are connected by interactions between their prion domains, which form a 4-nm amyloid filament backbone, surrounded by the corresponding C-terminal moieties.

Mass distribution and spatial organization of the linear bacterial motor of Spiroplasma citri R8A2.

In the simple, helical, wall-less bacterial genus Spiroplasma, chemotaxis and motility are effected by a linear, contractile motor arranged as a flat cytoskeletal ribbon attached to the inner side of the membrane along the shortest helical line. With scanning transmission electron microscopy and diffraction analysis, we determined the hierarchical and spatial organization of the cytoskeleton of Spiroplasma citri R8A2. The structural unit appears to be a fibril, approximately 5 nm wide, composed of dimers of a 59-kDa protein; each ribbon is assembled from seven fibril pairs. The functional unit of the intact ribbon is a pair of aligned fibrils, along which pairs of dimers form tetrameric ring-like repeats. On average, isolated and purified ribbons contain 14 fibrils or seven well-aligned fibril pairs, which are the same structures observed in the intact cell. Scanning transmission electron microscopy mass analysis and sodium dodecyl sulfate-polyacrylamide gel electrophoresis of purified cytoskeletons indicate that the 59-kDa protein is the only constituent of the ribbons.

Titin and the sarcomere symmetry paradox

Titin is thought to play a major role in myofibril assembly, elasticity and stability. A single molecule spans half the sarcomere and makes interactions with both a thick filament and the Z-line. In the unit cell structure of each half sarcomere there is one thick filament with 3-fold symmetry and two thin filaments with approximately 2-fold symmetry. The minimum number of titin molecules that could satisfy both these symmetries is 12. We determined the actual number of titin molecules in a unit cell from scanning transmission electron microscopy mass measurements of end-filaments. One of these emerges from each tip of the thick filament and is thought to be the in-register aggregate of the titin molecules associated with the filament. The mass per unit length of the end-filament (17.1 kDa/nm) is consistent with six titin molecules not 12. Thus the number of titin molecules present is insufficient to satisfy both symmetries. We suggest a novel solution to this paradox in which four of the six titin molecules interact with the two thin filaments in the unit cell, while the remaining two interact with the two thin filaments that enter the unit cell from the adjacent sarcomere. This arrangement would augment mechanical stability in the sarcomere.

Structural Characterization of Two Aquaporins Isolated from Native Spinach Leaf Plasma Membranes

Two members of the aquaporin family, PM28A and a new one, PM28C, were isolated and shown to be the major constituents of spinach leaf plasma membranes. These two isoforms were identified and characterized by matrix-assisted laser desorption ionization-mass spectrometry. Edman degradation yielded the amino acid sequence of two domains belonging to the new isoform. PM28B, a previously described isoform, was not found in our preparations. Scanning transmission electron microscopy mass analysis revealed both PM28 isoforms to be tetrameric. Two types of particles, a larger and a smaller one, were found by transmission electron microscopy of negatively stained solubilized proteins and by atomic force microscopy of PM28 two-dimensional crystals. The ratio of larger to smaller particles observed by transmission electron microscopy and single particle analysis correlated with the ratio of PM28A to PM28C determined by matrix-assisted laser desorption ionization-mass spectrometry. The absence of PM28B and the ratio of PM28A to PM28C indicate that these plasma membrane intrinsic proteins are differentially expressed in spinach leaves. These findings suggest that differential expression of the various aquaporin isoforms may regulate the water flux across the plasma membrane, in addition to the known mechanism of regulation by phosphorylation.

STEM mass mapping of type VI collagen microfibrils: Implications for chain composition and alternative splicing

Type VI collagen is a major structural interactive extracellular matrix macromolecule which forms double-beaded microfibrils in the extracellular space. These microfibrils can be isolated in native form from collagenase digest of skin fibroblast cell layers by chromatography on Sepharose CL-2B. Scanning transmission electron microscope (STEM) mass mapping showed a periodicity of 104 nm and a mass/bead of 1500 kDa. In addition, there was an uneven mass distribution along the bead. Microfibrils arise by end-to-end aggregation of tetramers which should produce microfibrils with bead mass of ≈2000 kDa and homogeneous mass distribution across the bead. Reduction in the mass across the bead implies either altered chain composition, alternative splicing or proteolytic degradation. The pattern of splicing of type VI chains in human tissues and their biological implications are poorly defined. In this study, we have examined the abundance of alternatively spliced forms of theα2(VI) andα3(VI) chains in human skin fibroblasts. BothαC2 andα2C2a variants, but not theα2C2a′ form, were expressed in these although theα2C2 form appeared more abundant. Theα3(VI) N7 domain was frequently spliced out of transcripts present in skin fibroblasts, whereas theα3(VI) N9 domain was always present. No consistent pattern of splicing was observed and splicing is unlikely to account for the reduced mass observed in type VI collagen microfibrils.

Reconstitution, characterisation and mass analysis of the pentacylindrical allophycocyanin core complex from the cyanobacterium Anabaena sp. PCC 7120

The phycobilisome (PBS) of Anabaena sp. PCC 7120 was allowed to dissociate into its constituents and the resulting allophycocyanin (AP) fraction was purified. Its reconstitution yielded a complex which according to negative stain electron microscopy and spectral analysis was identical to the native pentacylindrical PBS core domain. Each cylinder of the central tricylindric unit was comprised of four AP (αβ)3 disks. Mass analysis using the scanning transmission electron microscope (STEM) showed the presence of 16 AP trimers in the intact reconstitute, which had a total mass of 1966(±66) kDa. Composition analysis indicated an AP trimer distribution of (AP-II):(AP-LCM):(AP-B):(AP-I)=6:2:2:6, i.e. an addition of two AP-I and two AP-II complexes compared to a tricylindrical PBS core domain. Therefore, we suggest that each supplementary half-core cylinder found in pentacylindrical AP core domains is comprised of one AP-I and one AP-II trimer, in agreement with the current model.The structural significance of the 127 kDa core membrane linker polypeptide was further investigated by subjecting the AP core reconstitute to mild chymotryptic degradation. After isolation, the digested complex exhibited a tricylindrical appearance while STEM mass analysis confirmed the presence of only 12 AP complexes. Polypeptide analysis by SDS-PAGE and Edman degradation related the half-cylinder loss to cleavage of the Rep4 domain of the core membrane linker polypeptide. On the basis of these data, a general model for the assembly of the three hemidiscoidal PBS types known to date is discussed.

Scanning transmission electron microscopy mass analysis of fibrillin-containing microfibrils from foetal elastic tissues

We have applied scanning transmission electron microscopy to intact native fibrillin-containing microfibrils isolated from foetal bovine elastic tissues in order to derive new insights into microfibril organisation. This technique provides quantitative data on the mass per unit length and axial mass distribution of unstained, unshadowed macromolecules. Scanning transmission electron microscopy of microfibrils from aorta, skin and nuchal ligament revealed that the beads corresponded to peaks of mass and the interbead regions to troughs of mass. These major features of axial mass distribution were characteristic of all microfibrils examined. Tissue-specific and age-dependent variations in mass were identified in microfibrils that were structurally comparable by rotary shadowing electron microscopy. Increased microfibril mass correlated with increasing gestational age. The additional mass was associated predominantly at, or close to, the bead. Some microfibril populations exhibited pronounced assymetry in their axial mass distribution. These data indicate that intact native microfibrillar assemblies from developing elastic tissues are heterogeneous in composition. Loss of mass following chondroitinase ABC or AC lyase treatment confirmed the presence of chondroitin sulphate in nuchal ligament microfibrillar assemblies.

Chapter 8 Scanning Transmission Electron Microscopy of Nuclear Structures

Publisher Summary The unique power of the scanning transmission electron microscopy (STEM) technique is its ability to examine isolated unstained structures in projection by mapping boundaries, internal mass distribution, and site-specific cluster labels, and measuring total mass. The digital STEM image can be compared directly to a computed projection of a model structure assembled from known or postulated components. If any feature of the proposed model is incorrect, the STEM image will provide direct statistical evidence as to the extent and significance of the discrepancy. STEM mass measurement, mass mapping, and heavy atom cluster labeling are widely known and accepted in the biophysics and biochemistry communities. The feasibility of the STEM portion of any proposed study provides the basic parameters of a possible model. It is similarly easy to assess how close the sample preparation is to the point of useful data collection with a simple pilot study. Therefore, the current approach is to try as many pilot studies of potentially feasible projects as possible and proceed as quickly as possible with those having the fewest practical problems.

The Role of the Dodecamer Subunit in the Dissociation and Reassembly of the Hexagonal Bilayer Structure of Lumbricus terrestris Hemoglobin

The dissociation of the approximately 3500-kDa hexagonal bilayer (HBL) hemoglobin (Hb) of Lumbricus terrestris upon exposure to Gdm salts, urea and the heteropolytungstates [SiW11O39]8- (SiW), [NaSb9W21O86]18- (SbW) and [BaAs4W40O140]27- (AsW) at neutral pH was followed by gel filtration, SDS-polyacrylamide gel electrophoresis, and scanning transmission electron microscopy. Elution curves were fitted to sums of exponentially modified gaussians to represent the peaks due to undissociated oxyHb, D (approximately 200 kDa), T+L (approximately 50 kDa), and M (approximately 25 kDa) (T = disulfide-bonded trimer of chains a c, M = chain d, and L = linker chains). OxyHb dissociation decreased in the order Gdm*SCN > Gdm.Cl > urea > Gdm.OAc and AsW > SbW > SiW. Scanning transmission electron microscopy mass mapping of D showed approximately 10-nm particles with masses of approximately 200 kDa, suggesting them to be dodecamers (a+b+c)3d3. OxyHb dissociations in urea and Gdm.Cl and at alkaline pH could be fitted only as sums of 3 exponentials. The time course of D was bell-shaped, indicating it was an intermediate. Dissociations in SiW and upon conversion to metHb showed only two phases. The kinetic heterogeneity may be due to oxyHb structural heterogeneity. Formation of D was spontaneous during HBL reassembly, which was minimal (</= 10%) without Group IIA cations. During reassembly, maximal (approximately 60%) at 10 mM cation, D occurs at constant levels (approximately 15%), implying the dodecamer to be an intermediate.

The Multi-hemoglobin System of the Hydrothermal Vent Tube Worm Riftia pachyptila: I. REEXAMINATION OF THE NUMBER AND MASSES OF ITS CONSTITUENTS

The deep-sea tube worm Riftia pachyptila Jones possesses a well developed circulatory system and a large coelomic compartment, both containing extracellular hemoglobins. Fresh vascular blood is heterogeneous and contains two different hemoglobins (V1 and V2), whereas the coelomic fluid is homogeneous and comprises only one hemoglobin (C1). Their molecular weights have been determined by scanning transmission electron microscopy mass mapping (STEM) and by multi-angle laser light scattering (MALLS). Both methods yielded approximately the same molecular weights with masses significantly higher than the literature data for V1. V1, V2, and C1 had Mr of 3396 +/- 540 x 10(3), 393 +/- 71 x 10(3), and 410 +/- 51 x 10(3) by STEM, and 3503 +/- 13 x 10(3), 433 +/- 8 x 10(3), and 380 +/- 4 x 10(3) by MALLS, respectively. Transmission electron micrographs of V1 are typical of an hexagonal bilayer hemoglobin (HBL Hb). When submitted to dilution or osmotic shock, V1 dissociates into halves and one-twelfth subunits like annelid HBL Hbs. V1 is resistant to urea treatment, indicating that hydrophobic interactions play a small role in its quaternary structure. Conversely, V1 Hb is rather unstable in solution without denaturant, a property which seems to be characteristic of vestimentiferan HBL Hbs and could be explained by an important number of hydrogen bonds.

Mass analysis of biological macromolecular complexes by STEM

Scanning transmission electron microscopy (STEM) provides a superbly versatile method of measuring the masses of macromolecular complexes ranging in size from single protein subunits to large virus particles. The physical basis of the method is the elastic scattering of electrons by the component atoms of the specimen. Unstained molecules yield a dark-field signal that is proportional to their local mass density, thus allowing direct measurements of the total mass of an individual particle, as well as of the masses of its resolved domains by integrating over appropriate regions of the image. In this review, we present an introduction to the STEM method of mass analysis from a practical standpoint, stressing the essential points of specimen preparation, as well as the scope and current limitations of the method. Its potentialities are illustrated by applications to several classes of macromolecules: isolated oligomeric proteins (the envelope glycoprotein of HIV), nucleoprotein complexes (SV40 minichromosome, transcription factor TFIIIC), membranous specimens (clathrin-coated membranes, the VDAC channel), and viruses (vesicular stomatitis virus; herpes simplex virus). In the case of multicomponent complexes, STEM mass measurements of both the intact complex and of defined biochemical derivatives (for instance, after extraction of specific components), allow one to compile complete and precise molecular inventories. Finally, we briefly anticipate future advances that should allow even more precise and detailed mass mappings, the labelling of specific sites with heavy atom clusters, and elemental mapping based on weak inelastic signals acquired in parallel with the relatively intense dark-field signals that have been so successfully exploited to date.

Mass analysis of biological macromolecular complexes by STEM.

Scanning transmission electron microscopy (STEM) provides a superbly versatile method of measuring the masses of macromolecular complexes ranging in size from single protein subunits to large virus particles. The physical basis of the method is the elastic scattering of electrons by the component atoms of the specimen. Unstained molecules yield a dark-field signal that is proportional to their local mass density, thus allowing direct measurements of the total mass of an individual particle, as well as of the masses of its resolved domains by integrating over appropriate regions of the image. In this review, we present an introduction to the STEM method of mass analysis from a practical standpoint, stressing the essential points of specimen preparation, as well as the scope and current limitations of the method. Its potentialities are illustrated by applications to several classes of macromolecules: isolated oligomeric proteins (the envelope glycoprotein of HIV), nucleoprotein complexes (SV40 minichromosome, transcription factor TFIIIC), membranous specimens (clathrin-coated membranes, the VDAC channel), and viruses (vesicular stomatitis virus; herpes simplex virus). In the case of multicomponent complexes, STEM mass measurements of both the intact complex and of defined biochemical derivatives (for instance, after extraction of specific components), allow one to compile complete and precise molecular inventories. Finally, we briefly anticipate future advances that should allow even more precise and detailed mass mappings, the labelling of specific sites with heavy atom clusters, and elemental mapping based on weak inelastic signals acquired in parallel with the relatively intense dark-field signals that have been so successfully exploited to date.