Scanning Small-angle X-ray Scattering Research Articles

Solvent-Dependent Dynamics of Cellulose Nanocrystals in Process-Relevant Flow Fields.

Flow-assisted alignment of anisotropic nanoparticles is a promising route for the bottom-up assembly of advanced materials with tunable properties. While aligning processes could be optimized by controlling factors such as solvent viscosity, flow deformation, and the structure of the particles themselves, it is necessary to understand the relationship between these factors and their effect on the final orientation. In this study, we investigated the flow of surface-charged cellulose nanocrystals (CNCs) with the shape of a rigid rod dispersed in water and propylene glycol (PG) in an isotropic tactoid state. In situ scanning small-angle X-ray scattering (SAXS) and rheo-optical flow-stop experiments were used to quantify the dynamics, orientation, and structure of the assigned system at the nanometer scale. The effects of both shear and extensional flow fields were revealed in a single experiment by using a flow-focusing channel geometry, which was used as a model flow for nanomaterial assembly. Due to the higher solvent viscosity, CNCs in PG showed much slower Brownian dynamics than CNCs in water and thus could be aligned at lower deformation rates. Moreover, CNCs in PG also formed a characteristic tactoid structure but with less ordering than CNCs in water owing to weaker electrostatic interactions. The results indicate that CNCs in water stay assembled in the mesoscale structure at moderate deformation rates but are broken up at higher flow rates, enhancing rotary diffusion and leading to lower overall alignment. Albeit being a study of cellulose nanoparticles, the fundamental interplay between imposed flow fields, Brownian motion, and electrostatic interactions likely apply to many other anisotropic colloidal systems.

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Scanning Small-Angle X-ray Scattering of Injection-Molded Polymers: Anisotropic Structure and Mechanical Properties of Low-Density Polyethylene

Pore anisotropy in shale and its dependence on thermal maturity and organic carbon content: A scanning SAXS study

Pore orientation in shale governs the fluid transport properties that are key to hydrocarbon production and potential CO2 sequestration. The present work deals with the detailed study of nano-heterogeneities in shales, across the bedding plane, of varying thermal maturity and total organic carbon content using scanning small-angle X-ray scattering (SAXS) experiments. The complementary X-ray Micro-Computed Tomography (μCT) and functional group mapping elucidate the heterogeneity in micrometer resolution. 2D SAXS profiles of the shales show elliptical patterns indicating the nanoscale pore anisotropy in shale. The orientation of pores and their spatial variation is strongly dependent on the content of organic matter. The variance in the anisotropy parameter is validated with chemical mapping and high-resolution 3D imaging.

Beyond microplastics - investigation on health impacts of submicron and nanoplastic particles after oral uptake in vitro

The continuously increasing use of plastics is supposed to result in a rising exposure of MNPs to humans. Available data on human health risks of microplastics after oral uptake increased immensely in the past years and indicates very likely only low risks after oral consumption. Concerning nanoplastics, uptake, transport and potential adverse effects after oral uptake are less well understood. This study aims to investigate differences between microplastic particles and particles in the submicron- and nanoscaled size derived from food-relevant polymers with a particle size range consistent with higher potential for cellular uptake, fate, and effects when applied to human intestinal and liver cells. This work includes the development of cellular and subcellular detection methods for synthetic polymeric particles in the micro- and nanometer-range, using Scanning Electron Microscopy, Small-Angle X-ray and Dynamic Light Scattering methods, Asymmetric Flow Field Flow Fractionation, octanol-water fractionation, fluorescence microscopy and flow cytometry. Polylactic acid (250 nm and 2 μm (polydisperse)), melamine formaldehyde (366 nm) and polymethylmethacrylate (25 nm) were thoroughly characterized. The submicro- and nanoplastic test particles showed an increased uptake and transport quantity through intestinal cells. Both types of particles resulted in observed differences of uptake behavior, most likely influenced by different lipophilicity, which varied between the polymeric test materials. Toxic effects were detected after 24 h only in overload situations for the particles in the submicrometer range. This study provides further evidence for gastrointestinal uptake of submicro- and nanoplastics and points towards differences regarding bioavailability between microplastics and smaller plastic particles that may result following the ingestion of contaminated food and beverages. Furthermore, the results reinforce the importance for studying nanoplastics of different materials of varying size, surface properties, polymer composition and hydrophobicity.

The decomposition process in high-purity Al-1.7\xa0at.% Cu alloys with trace elements: preservation of quenched-in vacancies by In, Sn and Pb influencing the theta , ' formation

Aluminium-copper alloys of the 2xxx type receive their excellent mechanical properties by the formation of copper-rich precipitates during hardening. Size, distribution and crystal structure of the formed precipitates determine the final strength of those alloys. Adding traces of certain elements, which bind to vacancies, significantly influences the decomposition behaviour, i.e. the diffusion of the copper atoms. For high-purity ternary alloys (Al-1.7 at.% Cu-X), we investigate the interaction of copper and trace element atoms (X=In, Sn, and Pb) with quenched-in vacancies by Positron Annihilation Lifetime Spectroscopy (PALS). By employing Vickers microhardness, Differential Scanning Calorimetry (DSC) and Small Angle X-Ray Scattering (SAXS) we obtain a comprehensive picture of the decomposition process: opposite to predicted binding energies to vacancies by ab-initio calculations we find during ageing at room and elevated temperature a more retarded clustering of copper in the presence of In rather than for Sn additions, while Pb, having the highest predicted binding to vacancies, shows nearly no retarding effect compared to pure Al-Cu. If the latter would be due to a limited solubility of lead, it had to be below 2 ppm. Transmission Electron Microscopy (TEM) as imaging method complements our findings. Annealing the quenched Al-1.7 at.% Cu-X-alloys containing 100 ppm In or Sn at 150,^circ {text {C}} leads to finely distributed theta , '-precipitates on the nanoscale, since due to the trace additions the formation temperature of theta , ' is lowered by more than 100,^circ {text {C}}. According to TEM small agglomerates of trace elements (In, Sn) may support the early nucleation for the theta , '-precipitates.

Plasmonic Supercrystals with a Layered Structure Studied by a Combined TEM‐SAXS‐XCCA Approach

AbstractSupercrystals composed of plasmonic nanoparticles constitute a promising material platform for tailored light‐matter interactions. The optimization of their optical properties requires precise syntheses and a detailed structural characterization that addresses not only the basic geometrical parameters but also the degree of order. Herein, plasmonic supercrystals with a well‐defined layered structure are studied by a combined transmission electron microscopy, small‐angle X‐ray scattering and X‐ray cross‐correlation analysis (TEM‐SAXS‐XCCA) approach. It is demonstrated that scanning small‐angle x‐ray scattering (SAXS) data can unambiguously be assigned to the number of crystalline layers by comparison with complementary transmission electron microscopy (TEM) experiments on the same regions of interest. A small but significant increase of the lattice constant with increasing number of layers and a high degree of orientational order irrespective of the number of layers is found. This points to specifics of the supercrystal formation mechanism that could be utilized to improve the control of self‐assembly for supercrystal geometries with subnanometer precision.

Mineralization of cortical bone during maturation and growth in rabbits.

The composite nature of bone as a material governs its structure and mechanical behavior. How the collagenous matrix mineralizes, in terms of both mineral deposition and structure of the mineral crystals, is highly interesting when trying to elucidate the complex structural changes that occur during bone growth and maturation. We have previously looked at mineral deposition and structural evolution of the collagenous matrix, linking both to changes in mechanics. The purpose of this study was to provide specific information on changes in crystal size and organization as a function of growth and maturation. Using micro-computed tomography (µCT) and micro-focused scanning small-angle X-ray scattering (SAXS) we investigated cortical bone in two orthogonal directions relative to the long axis of the humeri of New Zealand White rabbits spanning from new-born to 6-months of age. We also investigated the changes with tissue age by looking at radial profiles of osteonal structures in the 6-months old rabbits. The findings were compared to our previous compositional, structural and mechanical data on the same sample cohort. µCT showed a continuous mineral deposition up until 3-months of age, whilst the SAXS data showed an increase in both crystal thickness and degree of orientation up until 6-months of age. The osteonal profiles showed no statistically significant changes in crystal thickness. Comparison to previously collected mechanical data suggests that changes are not only explained by amount of mineral in the tissue but also by the crystal dimensions.

Assessing lesion malignancy by scanning small-angle x-ray scattering of breast tissue with microcalcifications

Scanning small-angle x-ray scattering (SAXS) measurements were performed on 36 formalin-fixed breast tissue biopsies obtained from two patients. All samples contained microcalcifications of type II, i.e. formed by hydroxyapatite. We demonstrate the feasibility of classifying breast lesions by scanning SAXS of tissues containing microcalcifications with a resolution of 35 m 30 m. We report a characteristic Bragg peak found around q = 1.725 nm−1 that occurs primarily for malignant lesions. Such a clear SAXS fingerprint is potentially linked to structural changes of breast tissue and corresponds to dimensions of about 3.7 nm. This material property could be used as an early indicator of malignancy development, as it is readily assessed by SAXS. If this fingerprint is combined with other known SAXS features, which also indicate the level of malignancy, such as lipid spacing and collagen periodicity, it could complement traditional pathology-based analyses. To confirm the SAXS-based classification, a histopathological workup and a gold standard histopathological diagnosis were conducted to determine the malignancy level of the lesions. Our aim is to report this SAXS fingerprint, which is clearly related to malignant breast lesions. However, any further conclusion based on our dataset is limited by the low number of patients and samples. Running a broad study to increase the number of samples and patients is of great importance and relevance for the breast-imaging community.

A beamline-compatible STED microscope for combined visible-light and X-ray studies of biological matter.

A dedicated stimulated emission depletion (STED) microscope had been designed and implemented into the Göttingen Instrument for Nano-Imaging with X-rays (GINIX) at the synchrotron beamline P10 of the PETRA III storage ring (DESY, Hamburg). The microscope was installed on the same optical table used for X-ray holography and scanning small-angle X-ray scattering (SAXS). Scanning SAXS was implemented with the Kirkpatrick-Baez (KB) nano-focusing optics of GINIX, while X-ray holography used a combined KB and X-ray waveguide optical system for full-field projection recordings at a defocus position of the object. The STED optical axis was aligned (anti-)parallel to the focused synchrotron beam and was laterally displaced from the KB focus. This close proximity between the STED and the X-ray probe enabled in situ combined recordings on the same biological cell, tissue or any other biomolecular sample, using the same environment and mounting. Here, the instrumentation and experimental details of this correlative microscopy approach are described, as first published in our preceding work [Bernhardt et al. (2018), Nat. Commun. 9, 3641], and the capabilities of correlative STED microscopy, X-ray holography and scanning SAXS are illustrated by presenting additional datasets on cardiac tissue cells with labeled actin cytoskeleton.

Combined scanning X-ray diffraction and holographic imaging of cardiomyocytes

This article presents scanning small-angle X-ray scattering (SAXS) experiments on the actomyosin assemblies in freeze-dried neo-natal rat cardiac muscle cells. By scanning the cells through a sub-micrometre focused beam, the local structure and filament orientation can be probed and quantified. To this end, SAXS data were recorded and analyzed directly in reciprocal space to generate maps of different structural parameters (scanning SAXS). The scanning SAXS experiments were complemented by full-field holographic imaging of the projected electron density, following a slight rearrangement of the instrumental setup. It is shown that X-ray holography is ideally suited to complete missing scattering data at low momentum transfer in the structure factor, extending the covered range of spatial frequencies by two orders of magnitude. Regions of interest for scanning can be easily selected on the basis of the electron density maps. Finally, the combination of scanning SAXS and holography allows for a direct verification of possible radiation-induced structural changes in the cell.

Probing the Acid-Induced Packing Structure Changes of the Molten Globule Domains of a Protein near Equilibrium Unfolding.

Using simultaneously scanning small-angle X-ray scattering (SAXS) and UV-vis absorption with integrated online size exclusion chromatography, supplemental with molecular dynamics simulations, we unveil the long-postulated global structure evolution of a model multidomain protein bovine serum albumin (BSA) during acid-induced unfolding. Our results differentiate three global packing structures of the three molten globule domains of BSA, forming three intermediates I1, I2, and E along the unfolding pathway. The I1-I2 transition, overlooked in all previous studies, involves mainly coordinated reorientations across interconnected molten globule subdomains, and the transition activates a critical pivot domain opening of the protein for entering into the E form, with an unexpectedly large unfolding free energy change of -9.5 kcal mol-1, extracted based on the observed packing structural changes. The revealed local packing flexibility and rigidity of the molten globule domains in the E form elucidate how collective motions of the molten globule domains profoundly influence the folding-unfolding pathway of a multidomain protein.

Molecular motifs for additives that retard PEO crystallization

We investigate the influence of several bifunctional phenol additives (resorcinol: RES, hydroquinone: HYD, p-hydroxybenzoic acid: PHBA, and p-nitrophenol: PNP) on the crystallization of matrix polymer, polyethyleneoxide. We employ solid state Nuclear Magnetic Resonance spectroscopy (NMR), Differential Scanning Calorimetry (DSC), optical microscopy, and Small Angle X-ray Scattering (SAXS) to investigate crystallization of the additivated PEO and compare with Density Functional Theory (DFT) calculations of additive-PEO interactions. Additive-polymer interactions are a function of the functional groups on the additive. Temperature-dependent spherulitic growth rate measurements from optical microscopy and SAXS lamellar long spacings indicate a distinct trend in the effect of additives on PEO crystallization. Change in PEO crystallization is most pronounced with PNP, followed by PHBA and finally RES and HYD. This trend correlates qualitatively with the binding energies of additive-PEO interactions from DFT studies. Our results suggest that DFT calculations might be a useful screening tool to evaluate the influence of additives on polymer crystallization. POLYM. ENG. SCI., 2016. © 2016 Society of Plastics Engineers

Interfibrillar packing of bovine cornea by table-top and synchrotron scanning SAXS microscopy.

Bovine cornea was studied with scanning small-angle X-ray scattering (SAXS) microscopy, by using both synchrotron radiation and a microfocus laboratory source. A combination of statistical (adaptive binning and canonical correlation analysis) and crystallographic (pair distribution function analysis) approaches allowed inspection of the collagen lateral packing of the supramolecular structure. Results reveal (i) a decrease of the interfibrillar distance and of the shell thickness around the fibrils from the periphery to the center of the cornea, (ii) a uniform fibril diameter across the explored area, and (iii) a distorted quasi-hexagonal arrangement of the collagen fibrils. The results are in agreement with existing literature. The overlap between laboratory and synchrotron-radiation data opens new perspectives for further studies on collagen-based/engineered tissues by the SAXS microscopy technique at laboratory-scale facilities.

A hierarchical view on material formation during pulsed-laser synthesis of nanoparticles in liquid.

Pulsed-laser assisted nanoparticle synthesis in liquids (PLAL) is a versatile tool for nanoparticle synthesis. However, fundamental aspects of structure formation during PLAL are presently poorly understood. We analyse the spatio-temporal kinetics during PLAL by means of fast X-ray radiography (XR) and scanning small-angle X-ray scattering (SAXS), which permits us to probe the process on length scales from nanometers to millimeters with microsecond temporal resolution. We find that the global structural evolution, such as the dynamics of the vapor bubble can be correlated to the locus and evolution of silver nanoparticles. The bubble plays an important role in particle formation, as it confines the primary particles and redeposits them to the substrate. Agglomeration takes place for the confined particles in the second bubble. Additionally, upon the collapse of the second bubble a jet of confined material is ejected perpendicularly to the surface. We hypothesize that these kinetics influence the final particle size distribution and determine the quality of the resulting colloids, such as polydispersity and modality through the interplay between particle cloud compression and particle release into the liquid.

Colloidal Nanoparticle Interaction Transition during Solvent Evaporation Investigated by in-Situ Small-Angle X-ray Scattering.

In-situ scanning small-angle X-ray scattering (SAXS) experiments have been performed to probe the drying of a single suspended droplet of silica colloids. It has been demonstrated that the formation of a nanoparticle shell during drying can be confirmed just by measuring the temporal evolution of the spatial transmission profile across the drying droplet. The shrinkage of the droplet stops once the shell is formed. The temporal dependence of the shell thickness and droplet radius has been estimated by quantitative analysis of the functionality of the transmission profiles. It is revealed that the position of the correlation peak originating from interactions between silica nanoparticles evolves linearly during the initial stage of drying and exhibits sigmoidal growth behavior in later stages. The interaction between colloidal particles in different drying stages has been investigated. We provide experimental confirmation of the transition from repulsive interaction to a capillary-driven short-range attraction during shell formation. The present work demonstrates that in-situ scanning SAXS on a suspended droplet is an invaluable technique for monitoring the dynamic self-organization of colloids as it probes the drying of complex fluids without the interference of a substrate.

A customizable software for fast reduction and analysis of large X-ray scattering data sets: applications of the new DPDAK package to small-angle X-ray scattering and grazing-incidence small-angle X-ray scattering.

X-ray scattering experiments at synchrotron sources are characterized by large and constantly increasing amounts of data. The great number of files generated during a synchrotron experiment is often a limiting factor in the analysis of the data, since appropriate software is rarely available to perform fast and tailored data processing. Furthermore, it is often necessary to perform online data reduction and analysis during the experiment in order to interactively optimize experimental design. This article presents an open-source software package developed to process large amounts of data from synchrotron scattering experiments. These data reduction processes involve calibration and correction of raw data, one- or two-dimensional integration, as well as fitting and further analysis of the data, including the extraction of certain parameters. The software, DPDAK (directly programmable data analysis kit), is based on a plug-in structure and allows individual extension in accordance with the requirements of the user. The article demonstrates the use of DPDAK for on- and offline analysis of scanning small-angle X-ray scattering (SAXS) data on biological samples and microfluidic systems, as well as for a comprehensive analysis of grazing-incidence SAXS data. In addition to a comparison with existing software packages, the structure of DPDAK and the possibilities and limitations are discussed.

Nanostructure of carious tooth enamel lesion

Carious lesions exhibit a complex structural organization composed of zones of higher and lower mineralization, formed by successive periods of cyclic de- and re-mineralization. A thorough understanding of the lesion morphology is necessary for the development of suitable treatments aiming to repair rather than replace the damaged tissue. This detailed understanding includes the entire lesion down to individual crystallites and nanopores within the natural organization of the crown. A moderate lesion, with surface loss and reaching dentin, and a very early lesion were studied. Scanning small-angle X-ray scattering (SAXS) with a pixel size of 20×20μm2 was used to characterize these lesions, allowing for the identification of distinct zones with varied absorption and scattering behavior, indicative of varied porosity and pore morphology. Despite these differences, the overall orientation and anisotropy of the SAXS signal was unaltered throughout both lesions, indicating that an anisotropic scaffold is still present in the lesion. The finding that crystallite orientation is preserved throughout the lesions facilitates the identification of preventive re-mineralizing strategies with the potential to recreate the original nanostructure.

Hypophosphatemic rickets is associated with disruption of mineral orientation at the nanoscale in the flat scapula bones of rachitic mice with development

Metabolic bone disorders such as rickets are associated with altered in vivo muscular force distributions on the skeletal system. During development, these altered forces can potentially affect the spatial and temporal dynamics of mineralised tissue formation, but the exact mechanisms are not known. Here we have used a murine model of hypophosphatemic rickets (Hpr) to study the development of the mineralised nanostructure in the intramembranously ossifying scapulae (shoulder bone). Using position-resolved scanning small angle X-ray scattering (SAXS), we quantified the degree and direction of mineral nanocrystallite alignment over the width of the scapulae, from the load bearing lateral border (LB) regions to the intermediate infraspinous fossa (IF) tissue. These measurements revealed a significant (p<0.05) increase in mineral nanocrystallite alignment in the LB when compared to the IF region, with increased tissue maturation in wild-type mice; this was absent in mice with rickets. The crystallites were more closely aligned to the macroscopic bone boundary in the LB when compared to the IF region in both wild type and Hpr mice, but the degree of alignment was reduced in Hpr mice. These findings are consistent with a correlation between the nanocrystallites within fibrils and in vivo muscular forces. Thus our results indicate a relevant mechanism for the observed increased macroscopic deformability in rickets, via a significant alteration in the mineral particle alignment, which is mediated by an altered spatial distribution of muscle forces.

Synchrotron 3D SAXS analysis of bone nanostructure

The complex structure of bone requires a structural description of the material at different hierarchical levels. At the micrometer level, collagen fibril orientation and osteocyte network architecture can be described by different light microscopy methods. However, further investigation of the nanostructure of bone requires high-resolution techniques such as electron microscopy as well as x-ray scattering methods. The basic building blocks at the nanometer level are organic type I collagen fibrils reinforced by nanoparticles of carbonated apatite mineral. Most commonly, these fibrils aggregate into lamellae of about 5 µm width, in both compact and spongy bone. The architecture of the mineral platelets and the collagen fibrils influences the mechanical properties. Models of twisted and rotated plywood motifs have been proposed, although detailed quantitative characterization at length scales comparable to typical tissue unit sizes are still lacking. Here, we describe a scanning small-angle x-ray scattering (SAXS) method to reconstruct the variation of the three-dimensional habit of mineral platelets within osteonal bone. We find that the platelets change their orientation at micrometer resolution and are organized structurally by a repeating unit of about 5 µm, which is in agreement with previous wide-angle x-ray diffraction microtexture measurements. At the spatial resolution of the microbeam used (1 µm), we observe fiber geometry. The presented SAXS reconstruction technique could also be applied to the analysis of nanoparticle orientation in highly textured biomaterials.

Multi-Incident Beam Compact Time-Of-Flight SANS Instrument with 1 Millimeter Diameter beams

Although scanning small-angle x-ray scattering (SAXS) instruments are available, almost no attempt has been made to realize scanning small-angle neutron scattering (SANS) instruments because of rather low flux available in the case of neutron scattering. We propose the use of a multi-pinhole collimator–pinhole combination to reduce the beam size to about 1–2-mm diameter immediately in front of a sample. With such small pinholes, we can produce a rather short instrument, on the order of 1–2 m, to have access to conventional minimum Q of about 0.03 nm−1. Because multiple beams hit the same detector at different parts of the detector, the obtained SANS patterns mutually overlap. However, using a wavelength-dependent SANS pattern, we were able to resolve the overlap in theory. We conducted a proof-of-principle type of experiment at the Hokkaido University electron linear accelerator based pulsed cold neutron source (HUNS) facility. We made several multi-pinhole plates with thin beam holes arranged in hexagonal patterns. By changing the moderator and detector pixel size and the instrument overall size, we can optimize the pinhole size and their layout. We conducted experiments using welded steel samples and seek the difference in SANS pattern in the welded and non-welded parts, as well as the heat-affected zone between them. We demonstrated the principle of resolving overlapped SANS patterns from the adjacent beams using wavelength-dependent scattering.