Scanning Electrochemical Microscopy Probe Research Articles

Investigation of the Electrocatalytic Reduction of Peroxydisulfate Using Scanning Electrochemical Microscopy.

The elementary steps of the electrocatalytic reduction of S2O82- using the Ru(NH3)63+/2+ redox couple were investigated using scanning electrochemical microscopy (SECM) and steady-state voltammetry (SSV). SECM investigations were carried out in a 0.1 M KCl solution using a 3.5 μm radius carbon ultramicroelectrode (UME) as the SECM tip and a 25 μm radius platinum UME as the substrate electrode. Approach curves were recorded in the positive feedback mode of SECM by reducing Ru(NH3)63+ at the tip electrode and oxidizing Ru(NH3)62+ at the substrate electrode, as a function of the tip-substrate separation and S2O82- concentration. The one-electron reaction between electrogenerated Ru(NH3)62+ and S2O82- yields the unstable S2O83•-, which rapidly dissociates to produce highly oxidizing SO4•-. Because SO4•- is such a strongly oxidizing species, it can be further reduced at both the tip and the substrate, or it can react with Ru(NH3)62+ to regenerate Ru(NH3)63+. SECM approach curves display a complex dependence on the tip-substrate distance, d, due to redox mediation reactions at both the tip and the substrate. Finite element method (FEM) simulations of both SECM approach curves and SSV confirm a previously proposed mechanism for the mediated reduction of S2O82- using the Ru(NH3)63+/2+ redox couple. Our results provide a lower limit for dissociation rate constant of S2O83•- (∼1 × 106 s-1), as well as the rate constants for electron transfer between SO4•- and Ru(NH3)62+ (∼1 × 109 M-1 s-1) and between S2O82- and Ru(NH3)62+ (∼7 × 105 M-1 s-1).

Simultaneous Mapping of Electrocatalytic Activity and Selectivity via Hybrid Scanning Electrochemical Probe Microscopy.

Nanoscale scanning electrochemical probe microscopy started to elucidate the heterogeneity of electrocatalytic activity at electrode surfaces. However, understanding the heterogeneity in product selectivity, another crucial aspect of interfacial reactivity, remains challenging. Herein, we introduce a method combining scanning electrochemical microscopy (SECM) and scanning electrochemical cell microscopy (SECCM) to enable the spatially resolved mapping of both activity and selectivity in electrocatalysis. A dual-channel nanopipette probe was developed: one channel for activity mapping and the other for product detection with a high collection efficiency (>95%) and sensitivity. Simultaneous mapping of activity and selectivity in the oxygen reduction reaction (ORR) is demonstrated. Combined with colocalized crystal orientation mapping, we uncover the local electrocatalytic performance of ORR at different facets on polycrystalline Pt and Au. The high-resolution selectivity mapping enabled by our method with colocalized structural characterization can provide structure-activity-selectivity relationships that are often unavailable in ensemble measurement, holding promise for understanding key structural motifs controlling interfacial reactivity.

Imaging fibrinogen assembly on calcium-doped titanium by using scanning electrochemical microscopy

Fibrinogen adsorption is a critical host response to the insertions of various medical devices. Scanning electrochemical microscopy (SECM) has the power to probe the local interactions between proteins and bulk solids in liquid environments; however, our knowledge of the distribution or the assembly structures of protein adsorption is limited. Here, fibrinogen assembly behaviors on calcium-doped titanium are imaged by resolving the strength of the SECM probe’s negative feedback in two-dimensional micro-regions. By using ion implantation techniques, calcium and/or silver were doped into polished titanium surfaces. The calcium-doped titanium was capable of releasing calcium, while the clean titanium and silver-doped titanium did not release their constituents. The two-dimensional discontinuous distribution of the probe current/steady current (i/i0) values were only detectable in calcium-doped groups, and this was incubating duration dependent, showing the micro-regions preferential for fibrinogen assembly in calcium-doped groups. This was consistent with the fibrinogen adsorption morphologies on calcium-doped titanium examined by dye-assisted scanning electron microscopy. It is concluded that protein assembly behaviors on bulk solid surfaces in liquid environments can be imaged by resolving the distribution of the SECM probe currents in two-dimensional areas. The method is promising in illuminating the true surface-protein interactions and the protein adsorption structure–function relations.

(Invited) Insights into Processes at the Electrode/Electrolyte Interface of Battery Electrodes Via Scanning (Electrochemical) Probe Microscopy

Scanning (electrochemical) probe microscopy (SEPM) techniques such as atomic force microscopy (AFM), scanning electrochemical microscopy (SECM), nano-pipette derived scanning probe methods like scanning electrochemical cell microscopy (SECCM) and hybrid methods have recently been used to study interfacial processes occurring at solid/electrolyte interfaces of battery electrodes [1]. So far, mainly Lithium-ion battery (LIB) electrodes have been studied, such as the solid-electrolyte interphase formation at graphite anodes [2,3]. Next generation battery chemistries, using earth abundant elements like sodium (Na), potassium (K), aluminum (Al) improving sustainability still suffer from insufficient knowledge of processes occurring during cycling at the electrode/electrolyte interface such as interphase formation, as gained insights from Li batteries cannot simply be transferred to post-Li chemistries.In this contribution, an overview of the potential of SEPM techniques to gain insight in interfacial process of post-Li battery chemistries will be given, focusing mainly on the SEI formation on hard carbon composite anodes for Na-ion batteries (SIBs) [4]. The influence of the electrolyte composition along with the effects of additives on the SEI formation and the nanomechanical properties of the electrode will be presented. In addition, given the abundance of Al and the high theoretical volumetric capacity, makes Al a highly attractive battery chemistry [5]. Despite these advantages, there are several challenges like the Al2O3 passivating layer and the mostly used acidic ionic liquid (IL)-based electrolyte AlCl3/1-ethyl-3-methylimidazolium chloride [EMIm]Cl that leads to corrosion, which determines the plating and stripping efficiency and therefore the overall performance. First correlative SECCM/EDX/EBSD studies on Al anodes will be presented. Acknowledgement This work contributes to the research performed at CELEST (Center for Electrochemical Energy Storage Ulm - Karlsruhe) and was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy – EXC 2154 – Project number 390874152 (POLiS Cluster of Excellence).

Electrochemical Scanning Probe Microscopy Evaluation of Li-Ion Battery Cathode Degradation through in Situ Oxygen Evolution Measurement and Interfacial Property Characterization

Degradation processes involving oxygen evolution significantly limit the performance, reversibility, and capacity of high energy density Li-ion battery (LiB) cathodes. In addition, oxygen evolution processes create hazardous conditions for LiB operation. Despite the importance of these processes, characterization of evolved O2 with sufficient spatial and temporal versatility is hampered by the complex setups required to perform electrochemical mass spectrometry, the gold standard for evaluating this process. Recently, we introduced a scanning electrochemical microscopy (SECM) approach that enables in-situ, real-time (i.e., few ms temporal resolution), chemically selective detection of O2.[1] Measurements were accomplished by positioning an SECM probe (i.e., an Au ultramicroelectrode) near operating cathode surfaces for detecting O2 via the oxygen reduction reaction (ORR). The superior signal-to-noise of this method enabled the observation of two peaks corresponding to a steady-state evolution at high voltage and a transient O2 evolution at low voltage on materials such as lithium cobalt oxide (LCO) and NMC electrodes.Here, we expand the capabilities of our technique by incorporating correlated measurements aimed at understanding how oxygen evolution profiles are related to surface electrochemical and mechanical properties. Specifically, we will focus on the use of feedback-mode SECM and the use of reactive mediators to evaluate the changes in the rates of electron transfer measured on materials undergoing O2 and after structural degradation. Furthermore, the use of electrochemical AFM allows us to measure the mechanical properties of these interfaces, in an attempt to tie the structural changes and the evolution of oxidizing species with the formation of cathode-electrolyte interfaces. Altogether, these multimodal SECM and AFM methods elucidate the manifold chemical, structural, and performance changes underpinning LiB cathode operation.[1] Mishra, A.; Sarbapalli, D.; Hossain, M.S.; Gossage, Z.T.; Li, Z.; Urban, A.; Rodríguez-López, J. Highly Sensitive Detection and Mapping of Incipient and Steady-State Oxygen Evolution from Operating Li-Ion Battery Cathodes via Scanning Electrochemical Microscopy. J. Electrochem. Soc., 2022, 169, 086501. Figure 1

Localized Tortuosity Determination of Li-Ion Battery Electrode Using SECM and SICM

Li-ion batteries’ limited power represents a barrier to their application in the domain of renewable energy. To examine the origin of this limitation, the effect of microstructural parameters such as porosity and tortuosity on ionic transport, especially through the electrolyte within the electrode pores needs to be studied. In this work, we tried to determine the local tortuosity in Li4Ti5O12 (LTO) electrodes with various porosities using two scanning probe microscopic techniques: Scanning Ion Conductance Microscopy (SICM) and Scanning Electrochemical Microscopy (SECM). SICM measures the effective ionic conductivity of Li+ ions whereas SECM probes the diffusion of electroactive species like anthracene.1,2 We observed that in both cases, the normalized current increases with porosity as more ions reach the tip through the pores of the electrode. The MacMullin number calculated from SICM and SECM measurements for the LTO electrodes having porosities from 50% to 63% shows that these techniques are complementary. Improved transport through these porous electrodes is indicated by the lower tortuosity values obtained compared to those anticipated by the mass transport models like the Bruggeman relationship. Hence, the tortuosity values determined from these microscopic techniques can be used as a strong tool to improve the modeling of electrolyte transport within electrodes. In turn, this should be highly valuable in the design of batteries with high power density.

Probing passivity of corroding metals using scanning electrochemical probe microscopy

AbstractPassive films are essential for the longevity of metals and alloys in corrosive environments. A great deal of research has been devoted to understanding and characterizing passive films, including their chemical composition, uniformity, thickness, porosity, and conductivity. Many characterization techniques are conducted under vacuum, which do not portray the true in‐service environments passive films will endure. Scanning electrochemical probe microscopy (SEPM) techniques have emerged as necessary tools to complement research on characterizing passive films to enable the in situ extraction of passive film parameters and monitoring of local breakdown events of compromised films. Herein, we review the current research efforts using scanning electrochemical microscopy, scanning electrochemical cell microscopy (or droplet cell measurements), and local electrochemical impedance spectroscopy techniques to advance the knowledge of local properties of passivated metals. The future use of SEPM for quantitative extraction of local film characteristics within in‐service environments (i.e., with varying pH, solution composition, and applied potential) is promising, which can be correlated to nanostructural and microstructural features of the passive film and underlying metal using complementary microscopy and spectroscopy methods. The outlook on this topic is highlighted, including exciting avenues and challenges of these methods in characterizing advanced alloy systems and protective surface films.

An Integrated, Exchangeable Three-Electrode Electrochemical Setup for AFM-Based Scanning Electrochemical Microscopy.

Scanning electrochemical microscopy (SECM) is a versatile scanning probe technique that allows monitoring of a plethora of electrochemical reactions on a highly resolved local scale. SECM in combination with atomic force microscopy (AFM) is particularly well suited to acquire electrochemical data correlated to sample topography, elasticity, and adhesion, respectively. The resolution achievable in SECM depends critically on the properties of the probe acting as an electrochemical sensor, i.e., the working electrode, which is scanned over the sample. Hence, the development of SECM probes received much attention in recent years. However, for the operation and performance of SECM, the fluid cell and the three-electrode setup are also of paramount importance. These two aspects received much less attention so far. Here, we present a novel approach to the universal implementation of a three-electrode setup for SECM in practically any fluid cell. The integration of all three electrodes (working, counter, and reference) near the cantilever provides many advantages, such as the usage of conventional AFM fluid cells also for SECM or enables the measurement in liquid drops. Moreover, the other electrodes become easily exchangeable as they are combined with the cantilever substrate. Thereby, the handling is improved significantly. We demonstrated that high-resolution SECM, i.e., resolving features smaller than 250 nm in the electrochemical signal, could be achieved with the new setup and that the electrochemical performance was equivalent to the one obtained with macroscopic electrodes.

Mechanistic Assessment of Metabolic Interaction between Single Oral Commensal Cells by Scanning Electrochemical Microscopy.

The human oral microbiome heavily influences the status of oral and systemic diseases through different microbial compositions and complex signaling between microbes. Recent evidence suggests that investigation of interactions between oral microbes can be utilized to understand how stable communities are maintained and how they may preserve health. Herein, we investigate two highly abundant species in the human supragingival plaque, Streptococcus mitis and Corynebacterium matruchotii, to elucidate their real-time chemical communication in commensal harmony. Specifically, we apply nanoscale scanning electrochemical microscopy (SECM) using a submicropipet-supported interface between two immiscible electrolyte solutions as an SECM probe not only to image the permeability of S. mitis and C. matruchotii membranes to tetraethylammonium (TEA+) probe ions but also to real-time visualize the metabolic interaction between two microbes via lactate production/consumption at a single-cell level. The metabolic relationship between two strains is quantitatively assessed by determining (1) the passive permeability of both bacterial membranes of 2.4 × 10-4 cm/s to the free diffusion of TEA+, (2) 0.5 mM of the lactate concentration produced by a single S. mitis strain at a rate of 2.7 × 10-4 cm/s, and (3) a lactate oxidation rate ≥5.0 × 106 s-1 by an individual C. matruchotii strain. Significantly, this study, for the first time, describes a mechanism of in situ metabolic interaction between oral commensals at the single-cell level through quantitative analysis, which supports the observed in vivo spatial arrangements of these microbes.

Spatially Resolved Optical Spectroscopic Measurements with Simultaneous Photoelectrochemical Mapping Using Scanning Electrochemical Probe Microscopy

A deep understanding of the properties of semiconductor films at the micro-/nanoscale level is fundamental toward designing effective photoelectrocatalysts. Here, we integrated spatially resolved optical spectroscopy (SR-OS) with scanning photoelectrochemical microscopy (SPECM) to collect UV/vis spectra and quantify photocurrents of localized sites on a nanostructured BiVO4 thin film. Direct measurement of absorbance allowed for the determination of band gap energy at each location. Absorbance and photocurrent maps were obtained and used to investigate heterogeneities on the films. Scanning electrochemical cell microscopy (SECCM) was also coupled with SR-OS to acquire quantitative photoelectrochemical data at the FTO/BiVO4 film interface, revealing higher photocurrents at the boundary regions. As a droplet-based technique, SECCM was employed to estimate the wetted area by measuring the maximum height of droplet stretch at each point, allowing for the calculation of photocurrent density. This novel approach provides an advantageous mean to correlate localized photocatalytic activities and band gap energies.

Operando Scanning Electrochemical Probe Microscopy during Electrocatalysis.

Scanning electrochemical probe microscopy (SEPM) techniques can disclose the local electrochemical reactivity of interfaces in single-entity and sub-entity studies. Operando SEPM measurements consist of using a SEPM tip to investigate the performance of electrocatalysts, while the reactivity of the interface is simultaneously modulated. This powerful combination can correlate electrochemical activity with changes in surface properties, e.g., topography and structure, as well as provide insight into reaction mechanisms. The focus of this review is to reveal the recent progress in local SEPM measurements of the catalytic activity of a surface toward the reduction and evolution of O2 and H2 and electrochemical conversion of CO2. The capabilities of SEPMs are showcased, and the possibility of coupling other techniques to SEPMs is presented. Emphasis is given to scanning electrochemical microscopy (SECM), scanning ion conductance microscopy (SICM), electrochemical scanning tunneling microscopy (EC-STM), and scanning electrochemical cell microscopy (SECCM).

Colocalized Raman spectroscopy – scanning electrochemical microscopy investigation of redox flow battery dialkoxybenzene redoxmer degradation pathways

Non-aqueous redox flow batteries offer high voltages for grid-level energy storage technologies. However, decomposition of the redoxmers – redox-active molecules that make up the anolyte and catholyte in the negative and positive cell compartments – is an important challenge to overcome for long-term storage. Here, we present a spectroelectrochemical study of the catholyte candidate 2,3-dimethyl-1,4-dialkoxybenzene (C7) and its decomposition mechanisms in the presence of a model nucleophilic base, pyridine. We utilize colocalized Raman microscopy and scanning electrochemical microscopy (Raman-SECM) to quantify the chemical rates of decomposition and qualitatively identify the reaction intermediates and products. A detailed study on how the Raman-SECM parameters (electrode distance, substrate electrode, and laser focal height) influence the Raman signal of the charged catholyte C7•+ is presented. Using optimized conditions, we monitored the deprotonation of C7•+ via Raman spectroscopy and the subsequent hydrogen abstraction from solvent molecules to regenerate C7 via electrochemistry. Finite element modeling was used to fit electrochemical and spectroscopic data, quantifying the deprotonation rates as kdep = 2000 and 700 L mol−1s−1 and abstraction rates as kabs = 0.5 and 0.2 s−1 in propylene carbonate and acetonitrile solvents, respectively. Our results show the value of spatiotemporal resolution in evaluating the chemical and electrochemical behavior of materials for redox flow batteries.

SECM investigation on pH changes in cellular environment induced by caffeine

This work shows the results of the fabrication and application of a potentiometric microsensor for real-time pH monitoring in the vicinity of C2C12 cell line muscle cells using Scanning Electrochemical Microscopy (SECM). This was achieved by electrodeposition of an iridium oxide film onto the surface of a dual sensor containing two microelectrodes (Au and Pt). The Au microelectrode was coated with an iridium oxide film and used as a potentiometric pH sensor. The sensor exhibited a super Nernstian response (around 70 mV pH−1), and its precise positioning above a single C2C12 cell was accomplished by means of an approach curve recorded with the Pt microelectrode. pH changes were induced by changing the cellular metabolism through the addition of caffeine to the culture medium, and an average decrease of up to 0.5 units in pH was noticed by measuring the pH at 10 µm from the cell surface. Much smaller pH changes were observed in control experiments, confirming that caffeine induces acidosis and that such a phenomenon can be monitored using the fabricated dual sensor coupled to SECM.

An isolated single-particle-based SECM tip interface for single-cell NO sensing

As a key factor in cellular metabolic processes, nitric oxide (NO) is a challenging target for in situ real-time monitoring due to its transient property and short diffusion distance. Scanning electrochemical microscopy (SECM) has unique advantages in single-cell analysis, which can obtain the electrochemical current by scanning the cell surface with a tip microelectrode. In particular, it can further improved the electrochemical response by enhancing the interface properties of its tip. Here, an interface design strategy based on platinum single nanoparticle (Pt NP) was developed, and fluorinated self-assembled monolayers (SAMs) were used to further improve its performance. This modified tip was used as an SECM probe for NO concentration monitoring and morphological imaging of single MCF-7 cells. It has the high sensitivity (164.7 μA/μM·cm2) and good selectivity for NO detection, which benefits from the efficient catalytic properties of Pt NPs and high mass transport and hydrophobic antifouling properties of the interface. Notably, it shows a superior performance in detecting the fluctuation of NO released by a single MCF-7-cell under the stimulation of cadmium (Cd), which demonstrates a promising method for using a single-particle-based tip in SECM applications.

Micro-Sized pH Sensors Based on Scanning Electrochemical Probe Microscopy.

Monitoring pH changes at the micro/nano scale is essential to gain a fundamental understanding of surface processes. Detection of local pH changes at the electrode/electrolyte interface can be achieved through the use of micro-/nano-sized pH sensors. When combined with scanning electrochemical microscopy (SECM), these sensors can provide measurements with high spatial resolution. This article reviews the state-of-the-art design and fabrication of micro-/nano-sized pH sensors, as well as their applications based on SECM. Considerations for selecting sensing probes for use in biological studies, corrosion science, in energy applications, and for environmental research are examined. Different types of pH sensitive probes are summarized and compared. Finally, future trends and emerging applications of micro-/nano-sized pH sensors are discussed.

Scanning Electrochemical Cell Microscopy: A Tool for Nanoscopic Deposition of Light-Driven Photocatalysts

Single and multi-barrel nanopipettes and nanopipette-based scanning electrochemical probe microscopy techniques like scanning electrochemical cell microscopy (SECCM) have gained significant attention as tools for localized, maskless, three-dimensional surface modifications [1,2]. The nanometer-sized orifices of nanopipettes allow delivering molecules to solution inducing concentration-confined electrodepositions. Also, electroless nanoscale depositions like the fountain pen technique [3] can be achieved by this technique.In this study, we present the deposition of various cobaloxime-based earth-abundant Co catalysts for light-driven hydrogen evolution reaction (HER) [4]. Arrays of different cobalt(III) complexes were deposited via SECCM and investigated in respect with their HER activity using scanning electrochemical microscopy (SECM) in combination of Pd-microsensors [5] for in situ hydrogen (H2) measurements under illumination. In addition, AFM studies revealed possible degradation of the commercially available neutral benchmark complex [Co(dmgH)2(py)Cl] in these studies. First results will also be presented in respect with the deposition of nanowires via co-deposition of HER catalyst and Ruthenium photosensitizer. First spatially resolved photocatalytic studies at such nanowires, which are characterized by high surface area, will be presented. Also, the influence of the substrate will also be discussed.

Nanoscale surface modification via scanning electrochemical probe microscopy

Micro- and nanoscale surface modification using scanning probe microscopy techniques in combination with electrochemically induced surface structuring provides a maskless in situ fabrication strategy enabling deposition or etching of three-dimensional nanostructures. This current opinion article focuses on scanning electrochemical probe microscopy techniques highlighting recent progress in nanoscale 3D surface modification along with a spotlight on approaches of practical relevance.

Scanning electrochemical cell microscopy: High-resolution structure−property studies of mono- and polycrystalline electrode materials

Scanning electrochemical cell microscopy (SECCM) is a nanopipette-based scanning electrochemical probe microscopy technique that utilises a mobile droplet cell to measure and visualise electrode activity with high spatiotemporal resolution. This article spotlights the use of SECCM for studying the electrochemistry of crystalline electrode materials, ranging from well-defined monocrystals (e.g., transition metal dichalcogenides: MoS2, WS2 and WSe2) to structurally/compositionally heterogeneous polycrystals (e.g., polycrystalline Pt, Au, Pd, Cu, Zn, low carbon steel, boron-doped diamond) and covering the diverse areas of (photo)electrocatalysis, corrosion science, surface science and electroanalysis. In particular, it is emphasised how nanoscale-resolved information from SECCM is readily related to electrode structure and properties, collected at a commensurate scale with complementary, co-located microscopy/spectroscopy techniques, to allow structure–property relationships to be assigned directly and unambiguously.

(Invited) Photo-SECM Measurements of Water Splitting at Single Semiconductor Particles

Understanding and improving the properties of photocatalysts can have important implications for energy conversion and storage. Because the activity of heterogeneous catalysts depends strongly on local atomic structures, probing (photo)catalytic reactions at specific local sites is critically important. We have recently reported the use of scanning electrochemical microscopy (SECM) for nanoscale imaging of photoelectrochemical processes at semiconductor surfaces. To illuminate a microscopic portion of the substrate surface facing the SECM probe, a glass-sealed, polished Pt tip simultaneously serves as a nanoelectrode and a light guide. In this paper, we present the results of first nanoscale SECM and photo-SECM experiments with single BiVO4 and SrTiO3 particles. Local mapping of oxygen and hydrogen fluxes produced by water splitting at single semiconductor particles was carried out using chemically modified SECM nanotips.

Development of a Versatile, Low-Cost Electrochemical System to Study Biofilm Redox Activity at the Micron Scale

ABSTRACTSpatially resolving chemical landscapes surrounding microbial communities can provide insight into chemical interactions that dictate cellular physiology. Electrochemical techniques provide an attractive option for studying these interactions due to their robustness and high sensitivity. Unfortunately, commercial electrochemical platforms that are capable of measuring chemical activity on the micron scale are often expensive and do not easily perform multiple scanning techniques. Here, we report development of an inexpensive electrochemical system that features a combined micromanipulator and potentiostat component capable of scanning surfaces while measuring molecular concentrations or redox profiles. We validate this experimental platform for biological use with a two-species biofilm model composed of the oral bacterial pathogen Aggregatibacter actinomycetemcomitans and the oral commensal Streptococcus gordonii. We measure consumption of H2O2 by A. actinomycetemcomitans biofilms temporally and spatially, providing new insights into how A. actinomycetemcomitans responds to this S. gordonii-produced metabolite. We advance our platform to spatially measure redox activity above biofilms. Our analysis supports that redox activity surrounding biofilms is species specific, and the region immediately above an S. gordonii biofilm is highly oxidized compared to that above an A. actinomycetemcomitans biofilm. This work provides description and validation of a versatile, quantitative framework for studying bacterial redox-mediated physiology in an integrated and easily adaptable experimental platform.IMPORTANCE Scanning electrochemical probe microscopy methods can provide information of the chemical environment along a spatial surface with micron-scale resolution. These methods often require expensive instruments that perform optimized and highly sensitive niche techniques. Here, we describe a novel system that combines a micromanipulator that scans micron-sized electrodes across the surface of bacterial biofilms and a potentiostat, which performs various electrochemical techniques. This platform allows for spatial measurement of chemical gradients above live bacteria in real time, and as proof of concept, we utilize this setup to map H2O2 detoxification above an oral pathogen biofilm. We increased the versatility of this platform further by mapping redox potentials of biofilms in real time on the micron scale. Together, this system provides a technical framework for studying chemical interactions among microbes.