Scanning Method Research Articles

Impact of Digital Manufacturing Methods on the Accuracy of Ceramic Crowns.

The purpose of this study was to assess the accuracy of full coverage crowns produced by two manufacturing methods: additive 3D printing and subtractive milling utilizing three different predefined cement spaces. Six groups were allocated based on the manufacturing method and the predefined cement space: printed wax with a 20 µm space (PW1); printed wax with a 50 µm space (PW2); printed wax with a 100 µm space (PW3); milled wax with a 20 µm cement space (MW1); milled wax with a 50 µm cement space (MW2); milled wax with a 100 µm cement space (MW3); milled zirconia coping with a 20 µm cement space (MZ1); milled zirconia coping with a 50 µm cement space (MZ2); milled zirconia with a 100 µm cement space (MZ3). All fabricated specimens were scanned using an Identica Blue 3D scanner and saved as standard tessellation language (STL) files. A triple scan method was performed using 3-matic software to assess accuracy. The discrepancy values were recorded in micrometers, and the analysis was conducted using one-way ANOVA. The wax printing method, with a cement gap design of 100 μm, demonstrated a significant improvement in the accuracy compared to the other methods (P<.01). In contrast, the zirconia milling method exhibited significantly lower accuracy relative to the other techniques (P<0.01). Moreover, different cement spaces resulted in various accuracy levels but the only statistically significant difference was observed for the 100 µm cement space in the printed wax group. The additive 3D printing method exhibited greater accuracy than the subtractive milling approach. Furthermore, altering the cement gap was found to impact the accuracy of both techniques, albeit without statistical significance. The accuracy of each CAM technique was investigated in this study, highlighting the promising accuracy of 3D-printed patterns for the lost-wax technique over direct crown milling. However, all methods produced reliable and accurate crown restorations.

Automated repair of asphalt pavement cracks and potholes utilizing 3D printing and LiDAR scanning

This study introduces a method for automatic repair of asphalt pavement cracks and potholes using 3D printing and LiDAR scanning. A scanning method was developed to accurately detect and represent cracks and potholes in a 3D model. To address the limitations of LiDAR scanning, such as missing data points caused by the irregular shapes of cracks and potholes, the screened Poisson method was applied to reconstruct the missing data points. These models were validated through both theoretical calculations and sand test. In addition, the research focuses on optimizing key 3D printing parameters, such as printing temperature and printing speed, to enhance performance of crack repair throughout semi-circular bending test. Direct tensile strength test was employed to assess the impact of waste materials (e.g., rubber tire powder and waste glass) on the bond strength of filled sample. The results indicated a volume difference of 2–5 % between the scanning method and the sand test method, demonstrating high accuracy in detecting and reconstructing 3D cracks/potholes. Binders modified with 10 % rubber tire powder, or 20 % waste glass exhibited the highest tensile strength of 212 kPa and 207 kPa, respectively. However, using more than 30 % waste materials is not recommended due to a significant reduction in bond strength compared to conventional binders. An optimal 3D printing speed of 180 mm/min and a temperature of 117 °C are recommended for use in 3D printing in laboratory conditions. It was also noted that higher printing speeds decrease indirect tensile strength, highlighting the importance of balanced parameter settings.

Structure and Properties of the Electroexplosive Coating of the TiB2-Ag System after Electron Beam Treatment

A coating of the TiB2-Ag system was formed through the use of sequential operations of electroexplosive spraying and electron beam processing. The values of electrical conductivity (62.0 MS/m), Vickers microhardness (0.251-0.265 GPa at the point of measurement on a silver matrix and 25-32 GPa at the point of measurement at inclusions of boride phases), nanohardness (4.48 ± 0.76 GPa) were determined), Young’s modulus (116±29 GPa), wear parameter under dry friction-sliding conditions (1.2 mm3/N • m) and friction coefficient (0.5). Switching wear resistance during accelerated tests was 7000 on and off cycles with an electrical resistance of 10.01 - 11.76 LiOhm. The thickness of the coatings is 100 microns. The coatings are formed by a silver matrix with inclusions of titanium borides located in it with three types of sizes: nanocrystalline, submicrocrystalline and microcrystalline. Quantitatively, in the structural composition among titanium borides, titanium diboride and silver (56 wt. %) are formed predominantly (41 wt. %), while other titanium borides account for 3 wt. %. Structural transformations are described using complementary methods of X-ray phase analysis, scanning and transmission electron microscopy.

The Effect of MiR320a on Lung Cancer.

Lung cancer has a high mortality rate among cancers in both women and men. Currently, lung cáncer diagnosis is made with clinical examination, low-dose CT scan and molecular-based methods and its treatment options include chemotherapy, surgery, radiotherapy or immunotherapy. However, the life expectancy of lung cancer is not very high, and still it is usually diagnosed very lately, which leads to poorer prognosis. MicroRNAs [miRNAs] are small noncoding RNAs that regulate many diverse activities in the cell that can affect tumorigenesis by regulating many cell functions related to cancer, such as cell cycle, metastasis, angiogenesis, me-tabolism, and apoptosis. Also, it can have a potential diagnostic, therapeutic, and prognostic value for lung cancer. MiR320a is a promising microRNA that may help us in the diagnosis, treatment and prognosis of lung cancer, but some aspects of its clinical application are still vague, especially its effect on heavy smokers, delivery mechanism, toxicity and lack of reliable critical value. In this paper, we examined its comprehensive molecular interactions that lead to its tumor suppres-sor effect, and we reviewed its clinical application until now.

Empirical Error Field Control at JET in preparation of ITER start-up

This work reports on error field identification and control studies carried out at JET and insights on the development of the empirical EF controller for ITER. The empirical EF controller has been included in the JET real-time central controller following the execution of the non-disruptive compass scan method (Paz-Soldan C. et al, Nuclear Fusion 62 (2022) 126007), which allowed the identification of the EF source and the currents for error field compensation. When testing the empirical EF controller, born locked n=1 modes have been observed to spin-up and a lower density regime has been explored in the 1.8 MA plasma current, 2.1 T toroidal magnetic field scenario than otherwise achievable. These experimental results demonstrate the benefits of EF correction. In preparation of EF correction studies in ITER, the empirical EF controller for ITER has been developed and integrated in the plasma control system database.

Microscopic Remaining Oil Classification Method and Utilization Based on Kinetic Mechanism

In reality, the remaining oil in the ultra-high water cut period is highly dispersed, so a thorough investigation is required to understand the microscopic remaining oil. This will directly influence the technological direction and allow for countermeasures such as enhanced oil recovery (EOR). Therefore, this study aims to investigate the state, classification method and utilization mechanism of the microscopic remaining oil in the late period of the ultra-high water cut. To achieve this, the classification of microscopic remaining oil based on mechanical mechanism was developed using displacement CT scan and micro-scale flow simulation methods. Three carefully selected mechanical characterization parameters were used: oil–water connectivity, oil–mass specific surface and oil–water area ratio. These give five types of microscopic remaining oil, which are as follows: A (capillary and viscous oil cluster type), B (capillary and viscous oil drop type), C (viscous oil film type), D (capillary force control throat type), and E (viscous control blind end type). The state of the microscopic remaining oil in classified oil reservoirs was defined after high-expansion water erosion. Based on micro-flow simulation and analysis of different forces during the displacement process, the main microscopic remaining oil recognized is in class-I, class-II and class-III reservoirs. Within the Eastern sandstone oilfields in China, the ultra-high water-cut stage is a good indicator that the class-I oil layer is dominated by capillary and viscous oil drop types distributed in large connected holes. The class-II oil layer has capillary and viscous force-controlled clusters distributed in small and medium pores with high connectivity. In the case of the class-III oil layer, it enjoys the support of capillary force control throats that are mainly distributed in small holes with high connectivity. Integrating mechanisms of different types of micro-remaining oil indicates that, enhancing utilization conditions requires increasing pressure gradient and shear force while reducing capillary resistance. An effective way to improve the remaining oil utilization is to increase the pressure gradient and change the flow direction during the water-drive development process. Hence, this forms a theoretical basis and a guide for the potential exploitation of remaining oil. Likewise, it provides a strategy for optimizing enhanced oil recovery in the ultra-high water-cut stage of mid-high permeability oil reservoirs worldwide.

Automated Attendance System with GPS-Integrated with Enhanced Navigation Tracking

With the rise of automation and smart technologies in educational institutions, efficient and reliable attendancetracking methods have become increasingly essential. Traditional attendance systems, which often involve manual or barcode scanning methods, are time-consuming and prone to inaccuracies. This research paper presents an innovative approach to student attendance tracking, utilising GPS-integrated barcode identification with wireless data transmission. The proposed system is designed to improve attendance accuracy and streamline student identification without the need for students to physically interact with scanning devices. By integrating GPS and barcode systems into the door panel, this attendance solution detects student presence in classrooms, records attendance, and transmits data in real time.

Comparative Study on NDT Techniques for Evaluation of Concrete Quality Exposed to Marine Environment

Concrete, the primary material used in quay walls, is directly exposed to saline environments. Coping concrete, particularly in areas where periodic berthing and loading/unloading occur, is prone to rapid quality deterioration. Current facility safety and maintenance guidelines assess concrete durability at specific points through sampling, which are intended to represent the entire inspection unit. This paper explores quality management strategies from an areal perspective by applying various non-destructive scanning methods to extensive areas of coping concrete. Ultrasonic array imaging and ground-penetrating radar scanning images revealed significant quality degradation in berthing operation areas, whereas sampling-based ultrasonic pulse velocity and rebound hardness values were less effective in detecting this degradation.

Direct Measurement of the Ciliary Sulcus Diameter Using Optical Coherence Tomography—Inter-Rater Variability

The determination of sulcus-to-sulcus measurements has been challenging due to the limitations of current approaches. Ultrasound methods are highly operator-dependent and require extensive training, while traditional optical devices cannot visualize structures posterior to the iris. However, modern optical anterior segment coherence tomography (AS-OCT) devices are changing this paradigm by identifying some anatomical landmarks posterior to the iris. This study evaluates the reproducibility of optical sulcus measurements in the context of sizing a novel accommodative intraocular lens (IOL). Preoperative OCT scans of patients scheduled for cataract surgery were analyzed regarding the dimensions of the ciliary sulcus using a custom scan method with a clinically available anterior segment optical coherence tomographer. Measurements were compared between two different readers, and various derived parameters were compared. The measurements by both readers were highly correlated (R2 &gt; 0.96), and their agreement was excellent (mean difference 0.02 mm with 95% limits of agreement from −0.11 to 0.15 mm). In contrast, the sulcus diameter measurement did not agree well with automatically calculated values, such as the anterior chamber width or white-to-white. This leads to the conclusion that modern swept-source AS-OCT measurements of the ciliary sulcus dimensions are feasible, reproducible, and may be a clinically useful tool.

A simple mechanical model of turbulence

This work examines the control and stabilization problems of vibrations in a hierarchical chain of oscillators with hysteresis couplings. Hysteresis coupling is formalized within the Bouc — Wen phenomenological model. The mass, stiffness, and damping properties of the oscillators are set to follow a specific scaling rule and decrease exponentially along the chain, thus forming a hierarchy. The model is verified using Kolmogorov’s hypotheses. To do this, energy spectra are constructed under hysteresis in coupling and without it at different amplitudes of the external excitation. As a result of computational experiments, it is shown that for a chain with hysteresis couplings at a high amplitude of excitation, the energy spectrum curve sufficiently corresponds to Kolmogorov’s hypotheses. The amplitude-frequency characteristics of the system are calculated under hysteresis in coupling using the frequency scanning method. In numerical experiments, frequency ranges of external excitation are identified, which correspond to the chaotic behavior of oscillators and their synchronization.

CT measurement of blood perfusion in hepatocellular carcinoma: from basic principle, measurement methods to clinical application

Hepatocellular carcinoma (HCC) is one of the common and fatal malignant tumors worldwide, and the burden of HCC is particularly severe in China. Physiologically, the blood supply to healthy liver is mainly from the portal vein, supplemented by the hepatic artery. While in the development of HCC, the main source of blood supply to HCC is changed from the portal vein to the hepatic artery. The characteristics of HCC vascularization are important for imaging, surgery, interventional therapy, targeted therapy, etc. Even in the future, with the development of radiation therapy technology, such as proton and heavy ion therapy and artificial intelligence technology, the dynamic changes in HCC blood perfusion can be used as a new biomarker of tumor activity to provide accurate information on the intensity modulation of radiotherapy, so that accurate measurements of HCC blood perfusion is of great significance in guiding the diagnosis and treatment of HCC. The technologies for measurement of HCC blood perfusion have developed from invasive techniques, such as inert gas scavenging, electromagnetic flowmeter, and radionuclide-labeled erythrocyte elution in the middle of the last century to the present non-invasive techniques of CT. With the development of CT imaging technology in the last 30 years, the CT-based imaging technology can assess the status of organ and tissue perfusion relatively easily and accurately. In this paper, the various CT measurement techniques of blood perfusion in HCC were categorized into three types: semi-quantitative technique, relative quantitative technique, and absolute quantitative technique. Their basic principle, scanning methods, and clinical applications were discussed to provide a reference for the diagnosis and treatment of HCC.

Dynamic sequential cross-sectional scanning increases detection rate of congenital heart disease in sonographers: a prenatal ultrasound training program

BackgroundPrenatal ultrasound is the preferred modality for diagnosing fetal congenital heart disease. Given issues of physician proficiency and hospital distribution, we propose a dynamic sequential cross-sectional scanning (SCS) to explore the feasibility of cardiac screening by sonographers with less than 5 years of experience in ultrasound.Materials and methodsTwenty residents were randomly divided into two groups, receiving training in the American Institute of Ultrasound in Medicine (AIUM) fetal echocardiography and the SCS method. According to the needs of training, the professional staff developed the theoretical knowledge question bank, the CHD ultrasonic video disease bank, and the assessment scale. Trainees completed the pre-training examination, theory and skill operation training, and post-training assessment. For the two groups, the theoretical knowledge, skill operation and disease diagnosis were analyzed statistically before and after training.ResultsAfter training, the trainees in both groups had significantly improved knowledge and diagnostic abilities, their diagnostic thinking about CHD was clear, and they could identify major or even all structural abnormalities and make a definite diagnosis. In terms of skill operation, both groups could complete all required scanning within the specified time. The scanning time of the SCS group was significantly lower than that of the AIUM group, and the effect of the receptor site in the AIUM group was significantly higher than that in the SCS group.ConclusionSCS can be used as a new rapid fetal cardiac scanning method and try to popularize among echocardiographer.

Multiscale scanning with nuisance parameters

Abstract We develop a multiscale scanning method to find anomalies in a d-dimensional random field in the presence of nuisance parameters. This covers the common situation that either the baseline-level or additional parameters such as the variance are unknown and have to be estimated from the data. We argue that state of the art approaches to determine asymptotically correct critical values for multiscale scanning statistics will in general fail when such parameters are naively replaced by plug-in estimators. Instead, we suggest to estimate the nuisance parameters on the largest scale and to use (only) smaller scales for multiscale scanning. We prove a uniform invariance principle for the resulting adjusted multiscale statistic, which is widely applicable and provides a computationally feasible way to simulate asymptotically correct critical values. We illustrate the implications of our theoretical results in a simulation study and in a real data example from super-resolution STED microscopy. This allows us to identify interesting regions inside a specimen in a pre-scan with controlled family-wise error rate.

Laser welding of dissimilar TiAl/Ti6-Al-4V materials: Effects of rapid in-situ laser pre-heating on microstructure and mechanical properties of the welding joint

TiAl alloy has broad application prospects in the aerospace field. In practical working environments, connecting with other materials is considered an important means of fully utilizing their excellent properties. This study employed a laser in-situ pre-scanning method to preheat the weld seam, achieving the connection between TiAl alloy and Ti-6Al-4V. On this basis, the microstructural evolution of the fusion zone (FZ), fusion line (FL), and heat-affected zone (HAZ) of the welded joint was analyzed in detail. By comparing with traditional welding processes, the effects of laser in-situ preheating on the microstructure and properties of the welded joints were studied. The results showed that the FZ area consists of α2 and martensitic α-Ti, while the FL on the TiAl side features a transition layer of β/B2 phases, providing plasticity and toughness to the welded joint. The in-situ scanning method reduced the cracks generated during welding, resulting in a more uniform distribution of the transition layer. The obtained FZ exhibited higher microhardness. The room temperature tensile strength of the welded joint reached 650 MPa. As the temperature increased, at 400 °C, the tensile strength and elongation reached 571 MPa and 3 %, respectively, significantly higher than the 450 MPa and 1.5 % achieved by conventional welding at the same temperature. When the temperature further increased to 500 °C and 600 °C, Ti-6Al-4V experienced significant softening, becoming the weak point of the welded joint.

Three-Dimensional Planimetry Assessment of Dental Plaque-Covered Area Reduction after Rinsing with 0.2% Sodium Hypochlorite Solution as Part of a Guided Biofilm Therapy® Protocol-Pilot Longitudinal Study.

Background/Objectives: Less often employed as a rinsing solution for controlling oral biofilms, NaOCL was used in oral rinses at various concentrations in steps 1 and 4 of periodontal therapy. The aim of this study was to quantitatively evaluate the biofilm-disruptive properties of a 0.2% NaOCl solution in standardized oral rinses using dedicated plaque-disclosing agents and 3D scanning methods in patients undergoing the regular Guided Biofilm Therapy® protocol. Methods: Eight patients with at least 20 teeth present evenly distributed between the two arches were included. After 24 h of refraining from oral hygiene, dental arches were stained with a disclosing agent, the subjects rinsed for 20 s, clinical photographs and 3D scans were performed, subjects rinsed again for 20 s, photographs and 3D scans were performed again, and then the GBT® protocol was resumed as usual. Data representing areas covered with dental plaque were acquired using the "Medit Scan for Clinics" software and then underwent a post-processing and rendering process. The outcome variable was the percent reduction in the plaque-covered areas. Results: For the upper jaw, the estimated mean percent reduction in the biofilm-covered area was 39.65%, while for the mandible, it was 38.26%. The analysis of individual photographs revealed changes in the plaque-covered areas and reductions in the color intensity of the residual plaque-covered areas under identical lighting conditions. Conclusions: When analyzed using 3D intraoral scanning, the 0.2% NaOCl rinsing solution seems to be a clinically efficient disruptor/dissolvent of the oral biofilm, both when integrated into modern protocols of periodontal therapy like GBT® and for home self-care.

The influence of pore throat heterogeneity and fractal characteristics on reservoir quality: A case study of chang 8 member tight sandstones, Ordos Basin

The Chang 8 member of the Yanchang Formation in the Ordos Basin exhibits extensive development of tight sandstone reservoirs. In comparison to conventional reservoirs, these tight sandstone reservoirs demonstrate smaller pore-throat systems and stronger heterogeneity due to interactions between inherent sedimentary components and various diagenetic processes. To further investigate the influence of microscopic pore throat structure on macroscopic physical properties and oil content within the reservoir, a comprehensive study was conducted utilizing high pressure mercury injection, nuclear magnetic resonance, X-CT scanning, and other pore throat testing methods. This study was complemented by observation techniques such as polarizing microscope, scanning electron microscopy, and laser confocal imaging, to study the pore throat system of reservoirs under the influence of different sedimentary components and diagenesis. By comparison, it is observed that the radius of the primary pore throat system in the tight sandstone reservoir ranges from 0.01 to 1 μm. The structural characteristics of the pore throat system significantly impact the macroscopic physical properties of the reservoir. Due to variations in testing methods, high pressure mercury injection, nuclear magnetic resonance (NMR), and X-ray computed tomography (X-CT) reveal different fractal dimensions of the reservoir's pore throat system. Therefore, it is better to respectively utilize fractal dimension Df2, Df2-NMR, Df2-CT, and pore throat parameters to characterize the microscopic pore throat system with a radius ranging from 0.01 to 1 μm. The decrease in the average pore throat radius and the increased irregularity of pore shape contribute to heightened heterogeneity in the micro-pore throat structure within the reservoir. This negatively impacts its physical properties and oil content. Furthermore, it is important to note that the minimum threshold of pore throat radius plays a crucial role as a primary factor determining the fluid seepage capacity within this reservoir. Moreover, when isolated pores exist, reduced fluid mobility ensues, which further worsens the seepage conditions of the reservoir. The chlorite rims development reservoir shows a low fractal dimension in its micro-pore throats, contributing to superior macroscopic petrophysical properties and oil content. However, compression, siliceous cementation, and calcite cementation negatively impact the average pore throat radius by increasing micropores, inaccessible pores, and narrow throat content. This results in a stronger heterogeneity of the pore throat structure, leading to poor seepage conditions and lower oil content.

Development of a nanometre scale X-ray speckle-based CT technique through the 3-D histological assessment of an acute respiratory distress syndrome model

The study of biological soft tissue structures at the micron scale details the function of healthy and pathological tissues, which is vital in the diagnosis and treatment of diseases. Speckle based X-ray phase contrast tomographic scans at a nanometer scale have the potential to thoroughly analyse such tissues in a quantitative and qualitative manner. Diamond light source, the UKs national synchrotron facility developed and refined a 1-D X-ray speckle-based imaging technique, referred to as Fly scan mode. This novel image acquisition technique was used to perform a rapid structural composition scan of rodent lung histology samples. The rodent samples were taken from healthy and Staphylococcus aureus induced acute respiratory distress syndrome models. The analysis and cross comparison of the fly scan method, absorption-based tomography and conventional histopathology H&E staining microscopy are discussed in this paper. This analysis and cross comparison outline the ways the speckle-based technique can be of benefit. These advantages include improved soft tissue contrast, 3-D volumetric rendering, segmentation of specific gross tissue structures, quantitative analysis of gross tissue volume. A further advantage is the analysis of cellular distribution throughout the volumetric rendering of the tissue sample. The study also details the current limitations of this technique and points to ways in which future work on this imaging modality may progress.

Contribution of spatially variable pitting corrosion on fatigue life prediction of RC beams

Pitting corrosion induces stress concentration in steel bars, significantly reducing the fatigue life of reinforced concrete (RC) beams. Moreover, spatially variable pitting corrosion can cause fatigue fractures in tensile steel bars at various cross-sections of beams, not just at the mid-span section. This will further increase the failure probability of beams but is rarely considered by existing studies. Thus, this study proposes a fatigue life prediction method for RC beams experiencing spatially variable pitting corrosion. First of all, the spatial variability of pitting corrosion in tensile steel bars in RC beams is simulated through the three-dimensional laser scanning method and the spectral representation method, in which the steel bar diameter, length, distance, corrosion level, and the correlation between corrosion pits are systematically considered. Subsequently, the fatigue crack initiation and propagation of pitting corroded steel bars are modeled based on fracture mechanics. The spatial analysis is then conducted on corroded RC beams until fatigue failure occurs. The proposed prediction method is verified with results from existing references. The findings highlight that neglecting the spatial variability of pitting corrosion leads to an overestimation of the fatigue life of corroded RC beams, especially under uniformly distributed loadings and high corrosion levels. This study provides a reasonable prediction for the lifespan of corroded RC beams.

Numerical simulation and experimental analysis of thermal conduction and stress in laser cladding repair of thin-walled parts

To minimize the deformation of thin-walled parts during the laser cladding process and enhance the quality of the repaired parts, the Finite Element Abaqus software was used to develop a thermal conduction and 3D stress model, the heat source used in the experiments was a double ellipsoid heat source model. This model simulates the thermal process and the deformation resulting from residual stresses in the laser cladding process on a titanium alloy substrate with a thickness of 2 mm. Through the simulation, the temperature field of the substrate at the end of each pass was obtained, and the cladding sequence with the smallest temperature gradient during the multi-pass laser melting process was determined. By combining simulation and practice, the multilayer stacking pattern was optimized to achieve deformation control. Analog simulation experiments indicate that the optimized single-layer multi-pass laser cladding method results in less heat accumulation and thermal stress compared to the unidirectional sequential scanning method. The flatness test results show that the specimens have less deformation with the optimized multilayer stacking method. In addition, the metallographic organisation of the two cladding specimens is analysed in this paper, and the results show that the optimised specimens exhibit excellent microstructures and properties.

Single-fibre tensile testing of plant fibres: Set-up compliance as a key parameter for reliable assessment of their mechanical behaviour

The use of plant fibres as reinforcements in engineering applications requires reliable determination of their mechanical properties. This work focuses on single-fibre longitudinal tensile testing and the significance of the tensile system compliance for obtaining reliable results. Four types of fibre are tested, namely basalt, aramid, elementary flax fibres and flax fibre bundles. An automated laser scanning method is used to determine their cross-sectional area (CSA) based on circular and elliptical morphological models. The compliance of the tensile system is evaluated by standard and photomechanical analyses, and its influence on the assessment of mechanical properties of the fibres is discussed. Our results show that the evaluation of the compliance is highly dependent on fibre type, but also on the choice of CSA morphological model. The resulting correction on maximum tensile moduli ranges from 6.5 % to 37.6 % for small-diameter fibres, and can reach 55.1 % for large-diameter fibres as flax fibre bundles. Moreover, we evidence that the tensile system compliance is not necessarily constant and evolves with the force range covered during the tensile test. This can have a significant impact on the shape of the stress-strain curves, and hence on the analysis of the overall mechanical behaviour of the fibres.