Scaffolds For Regenerative Medicine Research Articles

A Futuristic Development in 3D Printing Technique Using Nanomaterials with a Step Toward 4D Printing.

3D bioprinting has shown great promise in tissue engineering and regenerative medicine for creating patient-specific tissue scaffolds and medicinal devices. The quickness, accurate imaging, and design targeting of this emerging technology have excited biomedical engineers and translational medicine researchers. Recently, scaffolds made from 3D bioprinted tissue have become more clinically effective due to nanomaterials and nanotechnology. Because of quantum confinement effects and high surface area/volume ratios, nanomaterials and nanotechnological techniques have unique physical, chemical, and biological features. The use of nanomaterials and 3D bioprinting has led to scaffolds with improved physicochemical and biological properties. Nanotechnology and nanomaterials affect 3D bioprinted tissue engineered scaffolds for regenerative medicine and tissue engineering. Biomaterials and cells that respond to stimuli change the structural shape in 4D bioprinting. With such dynamic designs, tissue architecture can change morphologically. New 4D bioprinting techniques will aid in bioactuation, biorobotics, and biosensing. The potential of 4D bioprinting in biomedical technologies is also discussed in this article.

Osteosarcoma growth on trabecular bone mimicking structures manufactured via laser direct write

 This paper describes the direct laser write of a photocurable acrylate-based PolyHIPE (High Internal Phase Emulsion) to produce scaffolds with both macro- and microporosity, and the use of these scaffolds in osteosarcoma-based 3D cell culture. The macroporosity was introduced via the application of stereolithography to produce a classical “woodpile” structure with struts having an approximate diameter of 200 μm and pores were typically around 500 μm in diameter. The PolyHIPE retained its microporosity after stereolithographic manufacture, with a range of pore sizes typically between 10 and 60 μm (with most pores between 20 and 30 μm). The resulting scaffolds were suitable substrates for further modification using acrylic acid plasma polymerisation. This scaffold was used as a structural mimic of the trabecular bone and in vitro determination of biocompatibility using cultured bone cells (MG63) demonstrated that cells were able to colonise all materials tested, with evidence that acrylic acid plasma polymerisation improved biocompatibility in the long term. The osteosarcoma cell culture on the 3D printed scaffold exhibits different growth behaviour than observed on tissue culture plastic or a flat disk of the porous material; tumour spheroids are observed on parts of the scaffolds. The growth of these spheroids indicates that the osteosarcoma behave more akin to in vivo in this 3D mimic of trabecular bone. It was concluded that PolyHIPEs represent versatile biomaterial systems with considerable potential for the manufacture of complex devices or scaffolds for regenerative medicine. In particular, the possibility to readily mimic the hierarchical structure of native tissue enables opportunities to build in vitro models closely resembling tumour tissue.

Electrospun 3D multi-scale fibrous scaffold for enhanced human dermal fibroblasts infiltration

Electrospun polymeric nanofibrous scaffold possesses significant potential in the field of tissue engineering due to its extracellular matrix mimicking topographical features that modulate a variety of key cellular activities. However, traditional two-dimensional (2D) electrospun scaffolds are generally close-packed fiber mats which prohibit cell infiltration and proliferation. Consequently, the applications of electrospun scaffolds in regenerative medicine are limited. In this study, we detail the use of a needle collector to fabricate three-dimensional (3D) electrospun poly-ε-caprolactone (PCL) scaffolds with multi-scale fiber dimensions. The resultant pore size is 4 times larger than conventional 2D electrospun scaffolds with interweaving micro (3.3 ± 0.6 µm) and nano (240 ± 50 nm) fibers. The scaffold was surface modified by grafting with gelatin molecules. It was found that surface modification significantly improved human dermal fibroblasts (HDFs) cell infiltration throughout the 3D multi-scale scaffold. Even after an extended culture period of up to 28 days, cell proliferation was well supported in the surface-modified 3D multi-scale scaffold as confirmed by Ki67 staining. Extracellular matrix proteins secreted by the HDFs was evident on the 3D multi-scale PCL scaffold showing promising potential to facilitate tissue regeneration, in particular dermal tissue engineering.

From Tooth Adhesion to Bioadhesion: Development of Bioabsorbable Putty-like Artificial Bone with Adhesive to Bone Based on the New Material "Phosphorylated Pullulan".

Bioabsorbable materials have a wide range of applications, such as scaffolds for regenerative medicine and cell transplantation therapy and carriers for drug delivery systems. Therefore, although many researchers are conducting their research and development, few of them have been used in clinical practice. In addition, existing bioabsorbable materials cannot bind to the body's tissues. If bioabsorbable materials with an adhesive ability to biological tissues can be made, they can ensure the mixture remains fixed to the affected area when mixed with artificial bone or other materials. In addition, if the filling material in the bone defect is soft and uncured, resorption is rapid, which is advantageous for bone regeneration. In this paper, the development and process of a new bioabsorbable material "Phosphorylated pullulan" and its capability as a bone replacement material were demonstrated. Phosphorylated pullulan, which was developed based on the tooth adhesion theory, is the only bioabsorbable material able to adhere to bone and teeth. The phosphorylated pullulan and β-TCP mixture is a non-hardening putty. It is useful as a new resorbable bone replacement material with an adhesive ability for bone defects around implants.

Amniotic miracle: Investigating the unique development and applications of amniotic membrane in wound healing.

The perfect repair of damaged skin has always been a constant goal for scientists; however, the repair and reconstruction of skin is still a major problem and challenge in injury and burns medicine. Human amniotic membrane (hAM), with its good mechanical properties and anti-inflammatory, antioxidant and antimicrobial benefits, containing growth factors that promote wound healing, has evolved over the last few decades from simple skin sheets to high-tech dressings, such as being made into nanocomposites, hydrogels, powders, and electrostatically spun scaffolds. This paper aims to explore the historical development, applications, trends, and research hotspots of hAM in wound healing. We examined 2660 publications indexed in the Web of Science Core Collection (WoSCC) from January 1, 1975 to July 12, 2023. Utilizing bibliometric methods, we employed VOSviewer, CiteSpace, and R-bibliometrix to characterize general information, identify development trends, and highlight research hotspots. Subsequently, we identified a collection of high-quality English articles focusing on the roles of human amniotic epithelial stem cells (hAESCs), human amniotic mesenchymal stem cells (hAMSCs), and amniotic membrane (AM) scaffolds in regenerative medicine and tissue engineering. Bibliometric analysis identified Udice-French Research Universities as the most productive affiliation and Tseng S.C.G. as the most prolific author. Keyword analysis, historical direct quotations network, and thematic analysis helped us review the historical and major themes in this field. Our examination included the knowledge structure, global status, trends, and research hotspots regarding the application of hAM in wound healing. Our findings indicate that contemporary research emphasizes the preparation and application of products derived from hAM. Notably, both hAM and the cells isolated from it - hADSCs and hAESCs are prominent and promising areas of research in regenerative medicine and tissue engineering. This research delivers a comprehensive understanding of the knowledge frameworks, global dynamics, emerging patterns, and primary research foci in the realm of hAM applications for wound healing. The field is rapidly evolving, and our findings offer valuable insights for researchers. Future research outcomes are anticipated to be applied in clinical practice, enhancing methods for disease prevention, diagnosis, and treatment.

Integrating classical and fractional calculus rheological models in developing hydroxyapatite-enhanced hydrogels

This study presents a novel method for comprehending the rheological behavior of biomaterials utilized in bone regeneration. The focus is on gelatin, alginate, and hydroxyapatite nanoparticle composites to enhance their mechanical properties and osteoconductive potential. Traditional rheological models are insufficient for accurately characterizing the behavior of these composites due to their complexity and heterogeneity. To address this issue, we utilized fractional calculus rheological models, such as the Scott-Blair, Fractional Kelvin-Voigt, Fractional Maxwell, and Fractional Kelvin-Zener models, to accurately represent the viscoelastic properties of the hydrogels. Our findings demonstrate that the fractional calculus approach is superior to classical models in describing the intricate, time-dependent behaviors of the hydrogel-hydroxyapatite composites. Furthermore, the addition of hydroxyapatite not only improves the mechanical strength of hydrogels but also enhances their bioactivity. These findings demonstrate the potential of these composites in bone tissue engineering applications. The study highlights the usefulness of fractional calculus in biomaterials science, providing new insights into the design and optimization of hydrogel-based scaffolds for regenerative medicine.

Synthesis and Physicochemical Characterization of Gelatine-Based Biodegradable Aerogel-like Composites as Possible Scaffolds for Regenerative Medicine.

Regenerative medicine is an interdisciplinary field aiming at restoring pathologically damaged tissues and whole organs by cell transplantation in combination with proper supporting scaffolds. Gelatine-based ones are very attractive due to their biocompatibility, rapid biodegradability, and lack of immunogenicity. Gelatine-based composite hydrogels, containing strengthening agents to improve their modest mechanical properties, have been demonstrated to act as extracellular matrices (ECMs), thus playing a critical role in "organ manufacturing". Inspired by the lysyl oxidase (LO)-mediated process of crosslinking, which occurs in nature to reinforce collagen, we have recently developed a versatile protocol to crosslink gelatine B (Gel B) in the presence or absence of LO, using properly synthesized polystyrene- and polyacrylic-based copolymers containing the amine or aldehyde groups needed for crosslinking reactions. Here, following the developed protocol with slight modifications, we have successfully crosslinked Gel B in different conditions, obtaining eight out of nine compounds in high yield (57-99%). The determined crosslinking degree percentage (CP%) evidenced a high CP% for compounds obtained in presence of LO and using the styrenic amine-containing (CP5/DMAA) and acrylic aldehyde-containing (CPMA/DMAA) copolymers as crosslinking agents. ATR-FTIR analyses confirmed the chemical structure of all compounds, while optical microscopy demonstrated cavernous, crater-like, and labyrinth-like morphologies and cavities with a size in the range 15-261 µm. An apparent density in the range 0.10-0.45 g/cm3 confirmed the aerogel-like structure of most samples. Although the best biodegradation profile was observed for the sample obtained using 10% CP5/DMAA (M3), high swelling and absorption properties, high porosity, and good biodegradation profiles were also observed for samples obtained using the 5-10% CP5/DMAA (M4, 5, 6) and 20% CPMA/DMAA (M9) copolymers. Collectively, in this work of synthesis and physicochemical characterization, new aerogel-like composites have been developed and, based on their characteristics, which fit well within the requirements for TE, five candidates (M3, M4, M5, M6, and M9) suitable for future biological experiments on cell adhesion, infiltration and proliferation, to confirm their effective functioning, have been identified.

Reinforcing ethyl cellulose aerogels with poly(lactic acid) for enhanced bone regeneration

Abstract Developing double porous biodegradable and biocompatible scaffolds that can incorporate and release drugs in a controlled manner holds immense potential in regenerative medicine. This study presents a synthesis method for preparing a macro-mesoporous scaffold, where poly(lactic acid) adds to the macroporous region and mechanical properties, and ethyl cellulose adds to the surface area (182 m2/g). High surface area enables the incorporation of model drug indomethacin with an entrapment efficiency of 17.0% and its later controlled release profile. The resulting scaffold has desirable mechanical properties in the range of a natural trabecular bone with a compressive modulus of 22.4 MPa. The material is stable in the simulated body fluids for 120 days before the slow degradation starts. In vitro studies demonstrate the material's ability to support bone cell adhesion, proliferation, and differentiation, promoting osteogenic activity. Overall, the unique combination of poly(lactic acid) and ethyl cellulose produces advanced materials with tailored macro and mesopore properties, remarkable mechanical properties, optimal degradation rate, and drug delivery potential, making it a promising candidate for bone scaffolds in regenerative medicine and tissue engineering.

Decellularized tissue exhibits large differences of extracellular matrix properties dependent on decellularization method: novel insights from a standardized characterization on skeletal muscle

Decellularized matrices are an attractive choice of scaffold in regenerative medicine as they can provide the necessary extracellular matrix (ECM) components, signals and mechanical properties. Various detergent-based protocols have already been proposed for decellularization of skeletal muscle tissue. However, a proper comparison is difficult due to differences in species, muscle origin and sample sizes. Moreover, a thorough evaluation of the remaining acellular matrix is often lacking. We compared an in-house developed decellularization protocol to four previously published methods in a standardized manner. Porcine skeletal muscle samples with uniform thickness were subjected to in-depth histological, ultrastructural, biochemical and biomechanical analysis. In addition, 2D and three-dimensional cytocompatibility experiments were performed. We found that the decellularization methods had a differential effect on the properties of the resulting acellular matrices. Sodium deoxycholate combined with deoxyribonuclease I was not an effective method for decellularizing thick skeletal muscle tissue. Triton X-100 in combination with trypsin, on the other hand, removed nuclear material but not cytoplasmic proteins at low concentrations. Moreover, it led to significant alterations in the biomechanical properties. Finally, sodium dodecyl sulphate (SDS) seemed most promising, resulting in a drastic decrease in DNA content without major effects on the ECM composition and biomechanical properties. Moreover, cell attachment and metabolic activity were also found to be the highest on samples decellularized with SDS. Through a newly proposed standardized analysis, we provide a comprehensive understanding of the impact of different decellularizing agents on the structure and composition of skeletal muscle. Evaluation of nuclear content as well as ECM composition, biomechanical properties and cell growth are important parameters to assess. SDS comes forward as a detergent with the best balance between all measured parameters and holds the most promise for decellularization of skeletal muscle tissue.

Cell-Material Interplay in Focal Adhesion Points.

The complex interplay between cells and materials is a key focus of this research, aiming to develop optimal scaffolds for regenerative medicine. The need for tissue regeneration underscores understanding cellular behavior on scaffolds, especially cell adhesion to polymer fibers forming focal adhesions. Key proteins, paxillin and vinculin, regulate cell signaling, migration, and mechanotransduction in response to the extracellular environment. This study utilizes advanced microscopy, specifically the AiryScan technique, along with advanced image analysis employing the Density-Based Spatial Clustering of Applications with Noise (DBSCAN) cluster algorithm, to investigate protein distribution during osteoblast cell adhesion to polymer fibers and glass substrates. During cell attachment to both glass and polymer fibers, a noticeable shift in the local maxima of paxillin and vinculin signals is observed at the adhesion sites. The focal adhesion sites on polymer fibers are smaller and elliptical but exhibit higher protein density than on the typical glass surface. The characteristics of focal adhesions, influenced by paxillin and vinculin, such as size and density, can potentially reflect the strength and stability of cell adhesion. Efficient adhesion correlates with well-organized, larger focal adhesions characterized by increased accumulation of paxillin and vinculin. These findings offer promising implications for enhancing scaffold design, evaluating adhesion to various substrates, and refining cellular interactions in biomedical applications.

Bone-Regeneration Therapy Using Biodegradable Scaffolds: Calcium Phosphate Bioceramics and Biodegradable Polymers.

Calcium phosphate-based synthetic bone is broadly used for the clinical treatment of bone defects caused by trauma and bone tumors. Synthetic bone is easy to use; however, its effects depend on the size and location of the bone defect. Many alternative treatment options are available, such as joint arthroplasty, autologous bone grafting, and allogeneic bone grafting. Although various biodegradable polymers are also being developed as synthetic bone material in scaffolds for regenerative medicine, the clinical application of commercial synthetic bone products with comparable performance to that of calcium phosphate bioceramics have yet to be realized. This review discusses the status quo of bone-regeneration therapy using artificial bone composed of calcium phosphate bioceramics such as β-tricalcium phosphate (βTCP), carbonate apatite, and hydroxyapatite (HA), in addition to the recent use of calcium phosphate bioceramics, biodegradable polymers, and their composites. New research has introduced potential materials such as octacalcium phosphate (OCP), biologically derived polymers, and synthetic biodegradable polymers. The performance of artificial bone is intricately related to conditions such as the intrinsic material, degradability, composite materials, manufacturing method, structure, and signaling molecules such as growth factors and cells. The development of new scaffold materials may offer more efficient bone regeneration.

Mesenchymal Stem Cell-based Scaffolds in Regenerative Medicine of Dental Diseases.

Biomedical engineering breakthroughs and increased patient expectations and requests for more comprehensive care are propelling the field of regenerative dentistry forward at a fast pace. Stem cells (SCs), bioactive compounds, and scaffolds are the mainstays of tissue engineering, the backbone of regenerative dentistry. Repairing damaged teeth and gums is a significant scientific problem at present. Novel therapeutic approaches for tooth and periodontal healing have been inspired by tissue engineering based on mesenchymal stem cells (MSCs). Furthermore, as a component of the MSC secretome, extracellular vesicles (EVs) have been shown to contribute to periodontal tissue repair and regeneration. The scaffold, made of an artificial extracellular matrix (ECM), acts as a supporting structure for new cell development and tissue formation. To effectively promote cell development, a scaffold must be non-toxic, biodegradable, biologically compatible, low in immunogenicity, and safe. Due to its promising biological characteristics for cell regeneration, dental tissue engineering has recently received much attention for its use of natural or synthetic polymer scaffolds with excellent mechanical properties, such as small pore size and a high surface-to-volume ratio, as a matrix. Moreover, as a bioactive material for carrying MSC-EVs, the combined application of scaffolds and MSC-EVs has a better regenerative effect on dental diseases. In this paper, we discuss how MSCs and MSC-derived EV treatment may be used to regenerate damaged teeth, and we highlight the role of various scaffolds in this process.

Decellularized extracellular matrix-based composite scaffolds for tissue engineering and regenerative medicine.

Despite the considerable advancements in fabricating polymeric-based scaffolds for tissue engineering, the clinical transformation of these scaffolds remained a big challenge because of the difficulty of simulating native organs/tissues' microenvironment. As a kind of natural tissue-derived biomaterials, decellularized extracellular matrix (dECM)-based scaffolds have gained attention due to their unique biomimetic properties, providing a specific microenvironment suitable for promoting cell proliferation, migration, attachment and regulating differentiation. The medical applications of dECM-based scaffolds have addressed critical challenges, including poor mechanical strength and insufficient stability. For promoting the reconstruction of damaged tissues or organs, different types of dECM-based composite platforms have been designed to mimic tissue microenvironment, including by integrating with natural polymer or/and syntenic polymer or adding bioactive factors. In this review, we summarized the research progress of dECM-based composite scaffolds in regenerative medicine, highlighting the critical challenges and future perspectives related to the medical application of these composite materials.

Optimization of decellularization methods using human small intestinal submucosa for scaffold generation in regenerative medicine.

Porcine small intestinal submucosa, despite its successful use as a scaffold in regenerative medicine, has innate biomechanical heterogeneity. In this study, we hypothesized that human small intestinal submucosa could be a viable alternative bio-scaffold. For the first time, we characterize submucosal extraction from human small intestine and examine appropriate decellularization methods. In total, 16 human small intestinal submucosal samples were obtained and decellularized using three reported methods of porcine decellularization: Abraham, Badylak, and Luo. For each method, four specimens were decellularized. The remaining four specimens were designated as non-decellularized. We measured the amount of residual DNA and growth factors in decellularized human intestinal samples. Additionally, decellularized human small intestinal submucosa was co-cultured with mouse bone marrow-derived mesenchymal stem cells to examine mesenchymal stem cell survival and proliferation. The reference value for the amount of residual DNA deemed appropriate in decellularized tissue was established as 50 ng/mg of extracellular matrix dry weight or less. Abraham's method most successfully met this criterion. Measurement of residual growth factors revealed low levels observed in samples decellularized using the Abraham and Badylak methods. Co-culture of each small intestinal submucosal sample with mouse bone marrow-derived mesenchymal stem cells confirmed viable cell survival and proliferation in samples derived using protocols by Abraham and Badylak. Abraham's method most successfully met the criteria for efficient tissue decellularization and cell viability and proliferation. Thus, we consider this method most suitable for decellularization of human small intestinal submucosa.

Rapid Prototyping Technologies: 3D Printing Applied in Medicine.

Three-dimensional printing technology has been used for more than three decades in many industries, including the automotive and aerospace industries. So far, the use of this technology in medicine has been limited only to 3D printing of anatomical models for educational and training purposes, which is due to the insufficient functional properties of the materials used in the process. Only recent advances in the development of innovative materials have resulted in the flourishing of the use of 3D printing in medicine and pharmacy. Currently, additive manufacturing technology is widely used in clinical fields. Rapid development can be observed in the design of implants and prostheses, the creation of biomedical models tailored to the needs of the patient and the bioprinting of tissues and living scaffolds for regenerative medicine. The purpose of this review is to characterize the most popular 3D printing techniques.

Local elasticity evaluation of acid-denatured collagen by photoacoustic spectroscopy.

While there are various analytical methods for elasticity evaluation, those with micrometer-order spatial resolution are still under developing. As some of biological tissues such as capillary vessels and cochlea are very small and/or highly heterogeneous, development of analytical techniques with such high spatial resolution has been desired for biological and medical purposes. Especially, the elasticity of capillary vessels (several micrometer in diameter) would be an important indicator to find out early diseases. To measure the local elasticity for such small and/or heterogeneous samples, we have proposed an approach based on a temporal waveform of photoacoustic (PA) signal, i.e., time-domain PA. As the time-domain PA contains both the vibrating frequency and the sound propagation time after the excitation, itprovides the information on the local elasticity (from the frequency) at a specific depth (from the propagation time) of samples. In the present study, the signal from collagen sheets were obtained and analyzed as models of blood vessel walls and scaffolds for regenerative medicine. In contrast to previous studies using the agarose gel which showed a single frequency peak, the signal from the collagen sheets was mainly composed of two frequency peaks, assignable to surface and bulk vibration. Further, the bulk vibration was found to sensitively reflect the elasticity of the samples. Since the PA effect can be induced only at the position where the light absorber exists, the analytical method proposed here would allow us to measure the local elasticity and its spatial distribution in blood vessels and other tissues.

Additive Manufacturing of Polymer/Bioactive Glass Scaffolds for Regenerative Medicine: A Review.

Tissue engineering (TE) is a branch of regenerative medicine with enormous potential to regenerate damaged tissues using synthetic grafts such as scaffolds. Polymers and bioactive glasses (BGs) are popular materials for scaffold production because of their tunable properties and ability to interact with the body for effective tissue regeneration. Due to their composition and amorphous structure, BGs possess a significant affinity with the recipient's tissue. Additive manufacturing (AM), a method that allows the creation of complex shapes and internal structures, is a promising approach for scaffold production. However, despite the promising results obtained so far, several challenges remain in the field of TE. One critical area for improvement is tailoring the mechanical properties of scaffolds to meet specific tissue requirements. In addition, achieving improved cell viability and controlled degradation of scaffolds is necessary to ensure successful tissue regeneration. This review provides a critical summary of the potential and limitations of polymer/BG scaffold production via AM covering extrusion-, lithography-, and laser-based 3D-printing techniques. The review highlights the importance of addressing the current challenges in TE to develop effective and reliable strategies for tissue regeneration.

Novel Developments in Advanced Materials Fields: Porous and Non-Porous Biomaterials Used in Regenerative Medicine and Tissue Engineering

Abstract In this brief review, porous and non-porous biomaterials used as scaffolds in regenerative medicine and tissue engineering and new innovative techniques to obtain biomaterials were discussed. Various methods have been presented to obtain advanced materials used as scaffolds, such as (i) 3D printed biomineral composites obtained with bacteria-loaded ink (bactoInk), (ii) the use of vegetable waste, such as rice husks, parsley, spinach or cocoa in the development of bioplastics, (iii) the use of natural biological materials of animal origin (such as bovine bones, corals, snail shells or eggshells) from waste, or (iv) the creation of new biomaterials that can reduce or combat the infection of scaffolds after implantation.

Dual-drug loaded polysaccharide-based self-healing hydrogels with multifunctionality for promoting diabetic wound healing

Diabetic chronic wound healing still faces huge clinical challenge. The arrangement and coordination of healing processes are disordered in diabetic wound caused by the persistent inflammatory response, microbial infection, impaired angiogenesis, resulting in the delayed and even non-healing wounds. Here, the dual-drug loaded nanocomposite polysaccharide-based self-healing hydrogels (OCM@P) with multifunctionality were developed to promote diabetic wound healing. Curcumin (Cur) loaded mesoporous polydopamine nanoparticles (MPDA@Cur NPs) and metformin (Met) were introduced into the polymer matrix formed by the dynamic imine bonds and electrostatic interactions between carboxymethyl chitosan and oxidized hyaluronic acid to fabricate OCM@P hydrogels. OCM@P hydrogels show homogeneous and interconnected porous microstructure, which possess good tissue adhesiveness, enhanced compression strength, great anti-fatigue behavior, excellent self-recovery capacity, low cytotoxicity, rapid hemostatic ability and robust broad-spectrum antibacterial activity. Interestingly, OCM@P hydrogels exhibit rapid release of Met and long-term sustained release of Cur, thereby to effectively scavenge extracellular and intracellular free radicals. Significantly, OCM@P hydrogels remarkably promote re-epithelization, granulation tissue formation, collagen deposition and arrangement, angiogenesis as well as wound contraction in diabetic wound healing. Overall, the multifunctional synergy of OCM@P hydrogels greatly contributes to accelerating diabetic wound healing, which demonstrate promising application as scaffolds in regenerative medicine.

Recent advances in nano-scaffolds for tissue engineering applications: Toward natural therapeutics.

Among the promising methods for repairing or replacing tissue defects in the human body and the hottest research topics in medical science today are regenerative medicine and tissue engineering. On the other hand, nanotechnology has been expanded into different areas of regenerative medicine and tissue engineering due to its essential benefits in improving performance in various fields. Nanotechnology, a helpful strategy in tissue engineering, offers new solutions to unsolved problems. Especially considering the excellent physicochemical properties of nanoscale structures, their application in regenerative medicine has been gradually developed, and a lot of research has been conducted in this field. In this regard, various nanoscale structures, including nanofibers, nanosheets, nanofilms, nano-clays, hollow spheres, and different nanoparticles, have been developed to advance nanotechnology strategies with tissue repair goals. Here, we comprehensively review the application of the mentioned nanostructures in constructing nanocomposite scaffolds for regenerative medicine and tissue engineering. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Diagnostic Tools > Biosensing.