Hyperspectral Satellite Images Research Articles

Estimation of soil organic matter content by combining Zhuhai-1 hyperspectral and Sentinel-2A multispectral images

Hyperspectral satellite imagery has significant advantages in rapidly monitoring soil organic matter (SOM) content over a large area. However, limitations in the timely acquisition of site-specific data may affect its effectiveness due to weather influences and revisit cycles. This paper proposes a novel method for estimating SOM content that combines the high temporal resolution of the Zhuhai-1 hyperspectral satellite image and Sentinel-2A multispectral satellite image to broaden the spectral range of Zhuhai-1 images. Multisource features, including spectral bands, topographic features, textural features, and spectral indexes, are extracted from the combined image and digital elevation model. An improved genetic algorithm (IGA) is proposed to optimize feature selection and extreme gradient boosting (XGBoost) is then applied to estimate SOM content. The proposed method was validated using 197 topsoil samples and satellite images collected from a demonstration area in Lishu County, Jilin Province, China. The results indicate that the estimation accuracy using the combined image was greater than using one single image. Compared with only using the Sentinel-2A and Zhuhai-1 images, the coefficient of determination (R2) values improved from 0.61 and 0.73 to 0.82, the ratio of the prediction to the deviation (RPD) values improved from 1.62 and 1.93 to 2.35, and the ratio of performance to the interquartile distance (RPIQ) values improved from 2.16 and 2.58 to 3.15, respectively. Furthermore, the XGBoost algorithm outperformed the random forest algorithm in terms of model accuracy and mapping reliability. The use of multisource features improved the R2 value from 0.45 to 0.82 compared to only using 31 spectral bands of Zhuhai-1 and Sentinel-2A image, with contribution rates in descending order of spectral indexes (48.2%), topographic features (24.7%), spectral bands (19.9%), and textural features (7.2%). This paper thus presents a promising method for efficient periodic mapping of the SOM content by combining data from a hyperspectral satellite constellation and a multispectral satellite image.

Hyperspectral Reflectance Assessment for Preliminary Identification of Degraded Soil Zones in Industrial Sites, India

The study explores the potential of next-generation satellite hyperspectral imaging systems for screening and predicting surface‐soil contamination and degradation by exploiting various spectral indices and signature‐matching techniques at a heavily industrialized area in India. The soil moisture content, desertification and salinity status, clay or fine material content, heavy metal content, vegetation health status, and stress levels were assessed from continuum-removed spectral reflectance values. Results indicated the presence of water in two tailings ponds, high salinity, and desertification values in most of the tailings ponds and dump sites, clay boundary liner along four ponds, high heavy metal indices along three ponds and all dump sites, highly stressed vegetation near all tailings ponds and coal dump sites, and pollutants in nearby water channels. The results suggest a strategy for the initial identification of priority areas for ground-based investigations and an alternative rapid methodology to monitor large industrial hubs in India.

Developing a novel index for detection of optically shallow waters using multispectral satellite imagery and radiative transfer modelling

ABSTRACT Optical remote sensing of water quality has been problematic due to contamination of remote sensing observations by the sea-bottom effect over complex shallow or very clear waters. This has resulted in providing misleading information on the estimation of Water Constituent Concentrations (WCCs) retrieved from satellite images. In this research, we used Radiative Transfer (RT) Modelling to develop a simple and innovative index named the Sea-Bottom Effect Index (SEBEI) to readily determine water pixels contaminated by the sea-bottom effect, (hereafter named Optically Shallow Waters, (OSWs)) from remote sensing observations. To define the SEBEI, we initially assessed the influence of the sea-bottom on simulated water-leaving reflectance (R rs ) using RT Water-Sea-Bottom (WSB) modelling. This evaluation encompassed a range of water depths, seabed albedos, and WCCs (i.e. Chlorophyll-a (Chla) and Suspended Particulate Matter (SPM)). Next, we detected the most sensitive wavelengths (i.e. 750 nm, 810 nm, and 900 nm) to the seabed contribution on the simulated R rs spectra at the water surface level and developed the SEBEI. We validated the accuracy of the proposed SEBEI over a time series of MEdium Resolution Imaging Spectrometer (MERIS) and Ocean and Land Colour Instrument (OLCI) images captured during low and high tidal phases over shallow waters of the Dutch Wadden Sea, the Netherlands. The results indicate that the SEBEI effectively distinguishes between OSWs and Optically Deep Waters (ODWs) using satellite images (with an R2 value of ≥ 0.97 and a Root Mean Square Error (RMSE) of ≤ 0.65). The SEBEI can serve as an intermediate solution for detecting OSWs in multispectral and hyperspectral satellite images worldwide. It eliminates the need for ancillary datasets like bathymetry maps and significantly enhances the reliability of WCC maps produced over complex shallow coastal waters.

Early-Season Crop Mapping by PRISMA Images Using Machine/Deep Learning Approaches: Italy and Iran Test Cases

Despite its high importance for crop yield prediction and monitoring, early-season crop mapping is severely hampered by the absence of timely ground truth. To cope with this issue, this study aims at evaluating the capability of PRISMA hyperspectral satellite images compared with Sentinel-2 multispectral imagery to produce early- and in-season crop maps using consolidated machine and deep learning algorithms. Results show that the accuracy of crop type classification using Sentinel-2 images is meaningfully poor compared with PRISMA (14% in overall accuracy (OA)). The 1D-CNN algorithm, with 89%, 91%, and 92% OA for winter, summer, and perennial cultivations, respectively, shows for the PRISMA images the highest accuracy in the in-season crop mapping and the fastest algorithm that achieves acceptable accuracy (OA 80%) for the winter, summer, and perennial cultivations early-season mapping using PRISMA images. Moreover, the 1D-CNN algorithm shows a limited reduction (6%) in performance, appearing to be the best algorithm for crop mapping within operational use in cross-farm applications. Machine/deep learning classification algorithms applied on the test fields cross-scene demonstrate that PRISMA hyperspectral time series images can provide good results for early- and in-season crop mapping.

АНАЛІЗ МЕТОДІВ ЗНАХОДЖЕННЯ АНОМАЛІЙ У ЗОБРАЖЕННЯХ

Abstract. Automatic anomaly detection is of great importance in industry, remote sensing, and medicine. It is important to be able to automatically process large amounts of data to detect, for example, chemical objects in multispectral and hyperspectral satellite images, sea mines in side-scan sonar images, or defects in industrial monitoring applications. Automatic detection of anomalous structures on arbitrary images refers to the task of finding inappropriate patterns relative to the normal state of the image. This is a difficult task in computer vision, since there is no clear and straightforward definition of what is normal or not normal for a given arbitrary image. The practical importance is manifested in the development of algorithms and models that can automatically detect unusual or anomalous patterns in images. An analysis of methods for finding anomalies in images from the point of view of the possibility of application to arbitrary images has been carried out. The classification of anomaly detection methods according to the criteria of the involved approaches and models used for modeling the background is presented. Methods that use machine learning, such as one-class support vector method and variational autoencoder, nearest neighbor-based anomaly detection, clustering-based anomaly detection, statistical anomaly detection, spectral anomaly detection, anomaly detection using information theory are discussed. The main attention is paid to the methods classified according to the background modeling approach. Five categories of background modeling methods based on probability density function, global and local homogeneity, sparsity, and self-similarity are considered. For anomaly detection applications, it is recommended to use methods in which the background model best describes the expected anomaly-free background, as this generally results in the best performance. On the basis of research, it was established that an effective universal model for detecting anomalies in arbitrary images should: use only a self-similar or sparse background model; process the residual image as a stochastic process to detect anomalies, such as anomalies in color noise; preprocess the residual image before detecting the anomaly.

Improving the Spatiotemporal Transferability of Hyperspectral Remote Sensing for Estimating Soil Organic Matter by Minimizing the Coupling Effect of Soil Physical Properties on the Spectrum: A Case Study in Northeast China

Soil organic matter (SOM) is important for the global carbon cycle, and hyperspectral remote sensing has proven to be a promising method for fast SOM content estimation. However, because of the neglect of the spectral response of soil physical properties, the accuracy and spatiotemporal transferability of the SOM prediction model are poor. This study aims to improve the spatiotemporal transferability of the SOM prediction model by alleviating the coupling effect of soil physical properties on spectra. Based on satellite hyperspectral images and soil physical variables, including soil moisture (SM), soil surface roughness (root-mean-square height, RMSH), and soil bulk weight (SBW), a soil spectral correction model was established based on the information unmixing method. Two important grain-producing areas in Northeast China were selected as study areas to verify the performance and transferability of the spectral correction model and SOM content prediction model. The results showed that soil spectral corrections based on fourth-order polynomials and the XG-Boost algorithm had excellent accuracy and generalization ability, with residual predictive deviations (RPDs) exceeding 1.4 in almost all the bands. In addition, when the soil spectral correction strategy was adopted, the accuracy of the SOM prediction model and the generalization ability after the model migration were significantly improved. The SOM prediction accuracy based on the XG-Boost-corrected spectrum was the highest, with a coefficient of determination (R2) of 0.76, a root-mean-square error (RMSE) of 5.74 g/kg, and an RPD of 1.68. The prediction accuracy, R2 value, RMSE, and RPD of the model after the migration were 0.72, 6.71 g/kg, and 1.53, respectively. Compared with the direct migration prediction of the model, adopting the soil spectral correction model based on fourth-order polynomials and XG-Boost reduced the RMSE of the SOM prediction results by 57.90% and 60.27%, respectively. This performance comparison highlighted the advantages for considering soil physical properties in regional-scale SOM predictions.

Estimation of soil organic carbon by combining hyperspectral and radar remote sensing to reduce coupling effects of soil surface moisture and roughness

Soil organic carbon (SOC) is important in the global carbon cycle. Accurate estimation of SOC content in cultivated land is a prerequisite for evaluating the carbon sequestration potential and quality of soils. However, existing SOC prediction studies based on hyperspectral remote sensing neglect the spectral response of the physical properties of surface soil, leading to inadequate model generalization. With the exponential growth of remote sensing data, the development of pixel-level soil spectral correction methods based on multi-source remote sensing data has become an interesting and challenging topic. This method aims to minimize the effect of soil physical properties on spectra, thus addressing the poor spatiotemporal transferability of SOC prediction models due to uncertain variations in surface soil physical properties. In this study, a soil spectral correction strategy is constructed using satellite hyperspectral image (HSI) and synthetic aperture radar (SAR) images through multi-order polynomial regression and convolutional neural networks. This strategy considers soil physical variables such as soil moisture (SM) content and root mean square height (RMSH) of soil surface roughness. The soil spectral correction model and SOC content prediction model were established using 80 soil samples collected from Site 1. Afterward, the performance and transferability of both models were verified using the remaining 25 samples from Site 1 and 50 samples from Site 2. The results showed that: 1) The effect of SM and RMSH on the soil pixel spectrum can be significantly reduced after correcting HSI using soil spectral correction strategy. The correlation coefficients between the corrected pixel spectrum and the ground-based spectrum increase by over 60 % compared with those between the original spectrum and the ground-based spectrum. 2) Soil spectral correction improves the prediction accuracy and mapping capability of HSI for SOC content, with the highest RP2 of 0.743 and RMSEP of 3.455 g/kg at Site 1. 3) Compared with the original HSI-based SOC prediction model, the soil spectral correction strategy based on multi-order polynomial and convolutional neural network reduced the RMSEP of SOC prediction results at Site 2 by 5.082 g/kg and 5.454 g/kg, and the RP2 increased by 0.390 and 0.409, respectively. 4) When predicting SOC content from raw HIS, SM and RMSH contribute to more than 60 % of the bias, with SM having a larger bias than RMSH. The findings of this study emphasize the influence of soil physical properties on SOC prediction and contribute to the existing research on SOC mapping using HSI and SAR data.

Fusion of GaoFen-5 and Sentinel-2B data for lithological mapping using vision transformer dynamic graph convolutional network

Lithological identification and mapping using remote sensing (RS) imagery are challenging. Traditional lithological mapping relies mainly on multispectral data and machine learning methods. However, inadequate spectral information and inappropriate classification algorithms are major problems for RS geological applications. Moreover, satellite hyperspectral images (HSI) at low spatial resolution and convolutional neural network (CNN)-based methods with incomplete feature extraction remain challenging because of the limitations of sensor imaging and convolutional kernels for lithological mapping. To address the above issues, in this study, smoothing filter-based intensity modulation (SFIM) fusion technology is first employed to fuse GaoFen-5 hyperspectral images and Sentinel-2B multispectral images. This approach significantly improves spatial details and enriches spectral information. Subsequently, a novel Vision Transformer Dynamic Graph Convolutional Network (ViT-DGCN) is proposed for lithological mapping of the Cuonadong dome, Tibet, China. ViT-DGCN is a joint model consisting of a transformer and a dynamic graph convolution module that enhances feature extraction capabilities by exploring long-range interaction sequence features and dynamic graph structure information in a targeted manner. The proposed algorithm exhibits superior performance compared to the others, achieving an overall accuracy of 97% for the Cuonadong dome using only 1% of the available training samples.

A semi-analytical approach for estimating inland water inherent optical properties and chlorophyll a using airborne hyperspectral imagery

The inversion of inherent optical properties (IOPs) and chlorophyll a (Chla) is one of the key objectives in water color remote sensing, and hyperspectral remote sensing with rich spectral information makes precise inversion possible. In this study, we developed a semi-analytical estimation method for inland water IOPs based on the quasi-analytical algorithm (QAA). Considering the complex optical characteristics of inland waters, empirical parameter regional optimization was conducted. Furthermore, a dual-band joint inversion strategy and Gaussian function fitting method were utilized to optimize the solution processes for the backscattering coefficient of particles (bbp) and the absorption coefficient of phytoplankton pigments (aph), respectively. This approach overcomes the limitations of single-band bbp inversion in inland waters. In addition, it directly decomposes the absorption coefficient to obtain aph using a Gaussian function, which can reduce the intermediate steps and errors caused by indirect inversion. For Chla, we constructed a binary inversion model using aph(677) and remote sensing reflectance (Rrs), where the coefficient of determination (R2) exceeded 0.8. We also constructed an airborne hyperspectral image correction process, including vicarious calibration, atmospheric correction, and bidirectional reflectance distribution function (BRDF) correction, obtaining high-precision Rrs images. The ground models were successfully applied to the airborne hyperspectral images, mapping the spatial distribution of IOPs and Chla concentration in the study area. The experiments demonstrated that the proposed semi-analytical method using airborne hyperspectral imagery exhibits a good performance in terms of modeling accuracy and mapping analysis, and successfully applied to long-term monitoring using satellite hyperspectral images, highlighting the significant potential of hyperspectral remote sensing for high-precision monitoring of regional water bodies.

Appraisal of EnMAP hyperspectral imagery use in LULC mapping when combined with machine learning pixel-based classifiers

The recent availability of satellite hyperspectral imaging combined with the developments in the classification techniques have paved the way towards improving our ability to obtain information on the spatiotemporal distribution of land use/land cover (LULC) at improved accuracy. In this context, the present study aims at evaluating the combined use of the recently launched Environmental Mapping and Analysis Program (EnMAP) hyperspectral satellite mission with two powerful machine learning (ML) classifiers. In particular, the Support Vector Machines (SVM) and Random Forest (RF) are used synergistically with EnMAP imagery in performing LULC mapping at a typical Mediterranean setting located in northern Greece. Evaluation of the derived LULC maps is based on the computation of a series classification accuracy metrics. The McNemar's chi-square statistical significance testing was also computed to confirm the statistical significance of the differences between the classifiers. In overall, results showed that SVM slightly outperformed RF, exhibiting a higher overall accuracy, of 92.6% and 88.1%, respectively, whereas the statistical significance of the findings was also attested by the McNemar's statistical test results. To our knowledge, this study is one of the first published so far focusing on exploring the capabilities of ENMAP imagery when combined with different ML pixel-based classifiers in the context of LULC mapping. Our results, indeed provided useful insights on the potential of EnMAP datasets in deriving information on the spatiotemporal distribution of LULC at a highly fragmented Mediterranean landscape, evidencing the EnMAP promising potential in this field.

Spatial–Spectral Interaction Super-Resolution CNN–Mamba Network for Fusion of Satellite Hyperspectral and Multispectral Image

Spatial–Spectral Interaction Super-Resolution CNN–Mamba Network for Fusion of Satellite Hyperspectral and Multispectral Image

ESTIMATION OF MANGROVE FRACTIONAL COVER FROM MULTISPECTRAL AND HYPERSPECTRAL DATA USING MIXTURE TUNED MATCHED FILTERING

Abstract. Mangroves provide various ecosystem services and contribute to climate change adaptation being one of the blue carbon ecosystems. The extents of mangroves are mapped and monitored using commonly available multispectral images, such as Landsat and Sentinel-2, to detect and assess gains and losses. However, this presence or absence per pixel based on crisp classification or index thresholding offers limited information on the dynamics of mangrove growth or decline. In this paper, we evaluated the use of Mixture Tuned Matched Filtering (MTMF) in estimating mangrove fractional cover (MFC) from multispectral (Landsat-8) and hyperspectral (PRISMA) satellite images. We also examined the utility of the mangrove vegetation index (MVI) and enhanced MVI (EMVI) for this purpose. The images were first denoised using Minimum Noise Fraction (MNF). MTMF was then separately applied to the sets of MNF bands, excluding noise bands, to generate Matched Filtering (MF) Score and Infeasibility layers. The endmember (mangrove) spectrum was extracted from a pixel identified using pixel purity index (PPI) and examination of high-resolution Google Earth base image, from which detailed mangrove extents were also delineated. A 30-m vector grid file was created and populated with MFC, MF Score, and Infeasibility values using zonal analysis. Correlation analysis, exploratory regression, and ordinary least squares (OLS) regression were performed. MF Score is moderately and positively correlated with MFC. In contrast, Infeasibility, MVI, and EMVI are uncorrelated or very weakly correlated with MFC. MFC can be estimated using an OLS model with MF Score and Infeasibility as explanatory variables. The performance of the PRISMA-based model (R2Adj=0.30, AIC=98643.20) was found to be better than the Landsat-8-based model (R2Adj=0.36, AIC=97428.89).

Removal of environmental influences for estimating soil texture fractions based on ZY1 satellite hyperspectral images

Soil texture is one of the important factors affecting the physical and chemical properties of soil, and is generally divided into sand, silt, and clay. Understanding its spatial distribution is crucial for agricultural and environmental decision-making. Estimation of soil texture fractions (STFs) can be achieved through visible, near-infrared, and shortwave infrared (VNIR-SWIR) spectra, making hyperspectral imaging technology particularly promising for low-cost and large-scale monitoring of STFs. However, the process of image acquisition is inevitably affected by soil environmental factors. In this study, a soil texture fractions estimation method for hyperspectral images was proposed based on Orthogonal Signal Correction (OSC). Firstly, the OSC algorithm was applied to eliminate the impact of soil environmental factors on the image spectra. Then, the spectral feature was enhanced by Fractional Order Derivative (FOD). Subsequently, a Partial Least Squares Regression (PLSR) model was established based on the optimal bands selected by Competitive Adaptive Reweighted Sampling (CARS). A total of 107 soil samples were obtained from the agricultural area in Lishu County, Jilin Province, China. The hyperspectral images of the ZY1-02D and ZY1-02E satellites were acquired simultaneously in this area. The results showed that the OSC algorithm effectively reduced the influence of soil environmental factors on image spectra, and significantly improved the accuracy of STFs estimation. After applying OSC to the original image spectra, the estimation accuracies (R2) for sand, silt, and clay content were improved from 0.52, 0.51, 0.50 to 0.81, 0.65, and 0.70 respectively. Compared to External Parameter Orthogonalization (EPO) correction, the model accuracy and stability were higher with OSC correction. The selected results from CARS indicated that the characteristic spectral bands of soil texture are concentrated around 500 nm, 750 nm, 900 nm, and 2200 nm. Further analysis indicates that the distribution trends of the soil texture fractions in this study were consistent with previous studies, demonstrating the good applicability of the estimation method.

Regional Inversion of Soil Heavy Metal Cr Content in Agricultural Land Using Zhuhai-1 Hyperspectral Images.

With the development of hyperspectral imaging technology, the potential for utilizing hyperspectral images to accurately estimate heavy metal concentrations in regional soil has emerged. Currently, soil heavy metal inversion based on laboratory hyperspectral data has demonstrated a commendable level of accuracy. However, satellite images are susceptible to environmental factors such as atmospheric and soil background, presenting a significant challenge in the accurate estimation of soil heavy metal concentrations. In this study, typical chromium (Cr)-contaminated agricultural land in Shaoguan City, Guangdong Province, China, was taken as the study area. Soil sample collection, Cr content determination, laboratory spectral measurements, and hyperspectral satellite image collection were carried out simultaneously. The Zhuhai-1 hyperspectral satellite image spectra were corrected to match laboratory spectra using the direct standardization (DS) algorithm. Then, the corrected spectra were integrated into an optimal model based on laboratory spectral data and sample Cr content data for regional inversion of soil heavy metal Cr content in agricultural land. The results indicated that the combination of standard normal variate (SNV)+ uninformative variable elimination (UVE)+ support vector regression (SVR) model performed best with laboratory spectral data, achieving a high accuracy with an R2 of 0.97, RMSE of 5.87, MAE of 4.72, and RPD of 4.04. The DS algorithm effectively transformed satellite hyperspectral image data into spectra resembling laboratory measurements, mitigating the impact of environmental factors. Therefore, it can be applied for regional inversion of soil heavy metal content. Overall, the study area exhibited a low-risk level of Cr content in the soil, with the majority of Cr content values falling within the range of 36.21-76.23 mg/kg. Higher concentrations were primarily observed in the southeastern part of the study area. This study can provide useful exploration for the promotion and application of Zhuhai-1 image data in the regional inversion of soil heavy metals.

Enhancement and analysis of hyperspectral satellite images for Soil Study and Behavior

Enhancement and analysis of hyperspectral satellite images for Soil Study and Behavior

Improvement of Algal Bloom Identification Using Satellite Images by the Algal Spatial Monitoring and Machine Learning Analysis in a New Dam Reservoir

Algal blooms are major issues and an ongoing cause of water quality problems in inland waters globally. In the case of harmful algal blooms, the water temperature rises after nitrogen and phosphorus inflow, which occurs in the summer, is the main cause of the algae bloom. In South Korea, algae monitoring methods have been performed by collecting water in point monitoring stations. Recently, in order to overcome the limitations of these existing monitoring methods, spatial monitoring methods using hyperspectral images and satellite images has been researched. We used satellite images for analysis of the spatial algal variation. The accuracy of algal identification is imperative for effective spatial monitoring of algal blooms in the context of ecological health and assessment. In this study, we generated algal big-data with simultaneously observed chlorophyll-a concentrations based on fluorescence measurement and predicted chlorophyll-a concentrations using 13- band satellite images derived from Sentinel-2. In order to validate the values from the satellite images, we compared them with simultaneously observed chlorophyll-a concentrations based on fluorescence measurement. The goal of this study is to improve the accuracy of predictions induced from satellite images. The analytical techniques were comparatively evaluated. The results showed that Artificial Neural Networks exhibited the best performance among them, improving more than 30% accuracy compared to that of multiple linear regression. Furthermore, the accuracy of identifying algal blooms has been shown to increase at high algal concentrations. In the end, it was successful to create algal bloom maps using a new algorithm to analyze algal bloom management.

Bathymetry Inversion Using Attention-Based Band Optimization Model for Hyperspectral or Multispectral Satellite Imagery

Satellite-derived bathymetry enables the non-contact derivation of large-scale shallow water depths. Hyperspectral satellite images provide more information than multispectral satellite images, making them theoretically more effective and accurate for bathymetry inversion. This paper focuses on the use of hyperspectral satellite images (PRISMA) for bathymetry inversion and compares the retrieval capabilities of multispectral satellite images (Sentinel-2 and Landsat 9) in the southeastern waters of Molokai Island in the Hawaiian Archipelago and Yinyu Island in the Paracel Archipelago. This paper proposes an attention-based band optimization one-dimensional convolutional neural network model (ABO-CNN) to better utilize the increased spectral information from multispectral and hyperspectral images for bathymetry inversion, and this model is compared with a traditional empirical model (Stumpf model) and two deep learning models (feedforward neural network and one-dimensional convolutional neural network). The results indicate that the ABO-CNN model outperforms the above three models, and the root mean square errors of retrieved bathymetry using the PRISMA images are 1.43 m and 0.73 m in the above two study areas, respectively. In summary, this paper demonstrates that PRISMA hyperspectral imagery has superior bathymetry inversion capabilities compared to multispectral images (Sentinel-2 and Landsat 9), and the proposed deep learning model ABO-CNN is a promising candidate model for satellite-derived bathymetry using hyperspectral imagery. With the increasing availability of ICESat-2 bathymetric data, the use of a combination of the proposed ABO-CNN model and the ICEsat-2 data as the training data provides a practical approach for bathymetric retrieval applications.

Band-Optimized Bidirectional LSTM Deep Learning Model for Bathymetry Inversion

Shallow water bathymetry is of great significance in understanding, managing, and protecting coastal ecological environments. Many studies have shown that both empirical models and deep learning models can achieve promising results from satellite imagery bathymetry inversion. However, the spectral information available today in multispectral or/and hyperspectral satellite images has not been explored thoroughly in many models. The Band-optimized Bidirectional Long Short-Term Memory (BoBiLSTM) model proposed in this paper feeds only the optimized bands and band ratios to the deep learning model, and a series of experiments were conducted in the shallow waters of Molokai Island, Hawaii, using hyperspectral satellite imagery (PRISMA) and multispectral satellite imagery (Sentinel-2) with ICESat-2 data and multibeam scan data as training data, respectively. The experimental results of the BoBiLSTM model demonstrate its robustness over other compared models. For example, using PRISMA data as the source image, the BoBiLSTM model achieves RMSE values of 0.82 m (using ICESat-2 as the training data) and 1.43 m (using multibeam as the training data), respectively, and because of using the bidirectional strategy, the inverted bathymetry reaches as far as a depth of 25 m. More importantly, the BoBiLSTM model does not overfit the data in general, which is one of its advantages over many other deep learning models. Unlike other deep learning models, which require a large amount of training data and all available bands as the inputs, the BoBiLSTM model can perform very well using equivalently less training data and a handful of bands and band ratios. With ICESat-2 data becoming commonly available and covering many shallow water regions around the world, the proposed BoBiLSTM model holds potential for bathymetry inversion for any region around the world where satellite images and ICESat-2 data are available.

Assessment of water quality parameters in Muthupet estuary using hyperspectral PRISMA satellite and multispectral images.

The continuous availability of spatial and temporal distributed data from satellite sensors provides more accurate and timely information regarding surface water quality parameters. Remote sensing data has the potential to serve as an alternative to traditional on-site measurements, which can be resource-intensive due to the time and labor involved. This present study aims in exploring the possibility and comparison of hyperspectral and multispectral imageries (PRISMA) for accurate prediction of surface water quality parameters. Muthupet estuary, situated on the south side of the Cauvery River delta on the Bay of Bengal, is selected as the study area. The remote sensing data is acquired from the PRISMA hyperspectral satellite and the Sentinel-2 multispectral instrument (MSI) satellite. The in situ sampling from the study area is performed, and the testing procedures are carried out for analyzing different water quality parameters. The correlations between the water sample results and the reflectance values of satellites are analyzed to generate appropriate algorithmic models. The study utilized data from both the PRISMA and Sentinel satellites to develop models for assessing water quality parameters such as total dissolved solids, chlorophyll, pH, and chlorides. The developed models demonstrated strong correlations with R2 values above 0.80 in the validation phase. PRISMA-based models for pH and chlorophyll displayed higher accuracy levels than Sentinel-based models with R2 > 0.90.

BIF-hosted high-grade magnetite iron ore targeting by hyperspectral wavelength mapping of chlorite: case study of Qidashan Iron Mine, northeast China

There are two kinds of chlorites occurred in Anshan area, among which the hydrothermal Fe-chlorite with longer Fe-OH wavelength is spatially related to the high-grade magnetite ore, meaning that wavelength mapping of chlorites can be used to target the BIF-hosted high grade iron ore. In this article, quadratic polynomial, cubic spline, and quartic polynomial method were used to interpolate the absorption wavelength near 2250 nm of China ZY1-02D satellite hyperspectral image. The result of quadratic polynomial is continuous without data overlapping or intervals, thus most suitable for discrimination of the chlorites. The field truth shows that the spatial distribution of Fe-chlorite, validated by XRD analysis, is not only in accordance with that of high grade magnetite ore bodies, but also consistent with the recently discovered concealed iron bonanza. The study shows that hyperspectral remote sensing techniques can play significant role in the exploration of magnetite iron ore in east Liaoning Province.