Sandwich Culture Research Articles

Flow pattern, particle capture and contractile behaviour in the demosponge Halichondria panicea

ABSTRACT In the aquiferous system of demosponges, the flow into inhalant canals is driven by the beating flagella of the choanocytes organized in chambers imbedded in the walls and the filtered water is discharged into exhalant canals. Our aim was to characterize the laminar flow pattern and fate of captured algal cells and microplastic beads in the inhalant canals in a sandwich culture of the demosponge Halichondria panicea in contact with the ‘mother sponge’ using microscope-video technique. Algal cells traced near the centreline of an inhalant canal moved with the highest speed and travelled the furthest, and when approaching the canal walls the flow speed decreased and the cells were captured to be subsequently digested. Microplastic particles accumulated also along the inhalant canal walls but were subsequently expelled into the exhalant canals. Adding a high concentration of 2–22 µm fragmented waste plastic particles triggered contractile behaviour. It started immediately with osculum closure in the ‘mother sponge’ lasting about 25 min and it was followed by delayed and temporary contractions of first inhalant and then exhalant canals in the sandwich culture. These results support the theory of how the sponge responds to ultimately ensure the ejection of the foul particles.

Comparison of Human Long-Term Liver Models for Clearance Prediction of Slowly Metabolized Compounds.

The accurate prediction of human clearance is an important task during drug development. The proportion of low clearance compounds has increased in drug development pipelines across the industry since such compounds may be dosed in lower amounts and at lower frequency. These type of compounds present new challenges to in vitro systems used for clearance extrapolation. In this study, we compared the accuracy of clearance predictions of suspension culture to four different long-term stable in vitro liver models, including HepaRG sandwich culture, the Hµrel stochastic co-culture, the Hepatopac micropatterned co-culture (MPCC), and a micro-array spheroid culture. Hepatocytes in long-term stable systems remained viable and active over several days of incubation. Although intrinsic clearance values were generally high in suspension culture, clearance of low turnover compounds could frequently not be determined using this method. Metabolic activity and intrinsic clearance values from HepaRG cultures were low and, consequently, many compounds with low turnover did not show significant decline despite long incubation times. Similarly, stochastic co-cultures occasionally failed to show significant turnover for multiple low and medium turnover compounds. Among the different methods, MPCCs and spheroids provided the most consistent measurements. Notably, all culture methods resulted in underprediction of clearance; this could, however, be compensated for by regression correction. Combined, the results indicate that spheroid culture as well as the MPCC system provide adequate in vitro tools for human extrapolation for compounds with low metabolic turnover. SIGNIFICANCE STATEMENT: In this study, we compared suspension cultures, HepaRG sandwich cultures, the Hµrel liver stochastic co-cultures, the Hepatopac micropatterned co-cultures (MPCC), and micro-array spheroid cultures for low clearance determination and prediction. Overall, HepaRG and suspension cultures showed modest value for the low determination and prediction of clearance compounds. The micro-array spheroid culture resulted in the most robust clearance measurements, whereas using the MPCC resulted in the most accurate prediction for low clearance compounds.

Adhesive Sulfabetaine Polymer Hydrogels for the Sandwich Cell Culture.

Sandwich culture systems are techniques that cultivate cells by sandwiching them between the top and bottom substrates. Since the substrates can be separated, the system is expected to be applied to the construct layering of patterned cells and to the isolation of stacked cells. In this study, we prepared hydrogels composed of zwitterionic sulfabetaine polymers, poly[2-(2-(methacryloyloxyethyl)dimethylammonio)ethyl-1-sulfate] (PZBMA). The ZBMA homopolymers have been shown to form aggregates in aqueous solutions due to their intermolecular interactions. The water content of the PZBMA hydrogels in water was ∼70% regardless of N,N'-methylenebis(acrylamide), BIS, content as the cross-linker. The results indicated that the intermolecular interaction contributed more to the swelling behaviors than the chemical cross-linker. However, PZBMA hydrogels with 0.1 mol % BIS showed not only high elongation (∼850%) properties but also high adhesiveness and self-healing properties. When this PZBMA hydrogel was impregnated with collagen and subjected to sandwich culture using Madin-Darby canine kidney (MDCK) cells, a three-dimensional morphology of MDCK cell aggregates was constructed. Such a sulfabetaine hydrogel is expected to be developed for regenerative medicine.

Low molecular weight acids and OATP1B mediated hepatic clearance: In vitro and in vivo evaluation using novel hypoxia-inducible factor prolyl hydroxylase inhibitors (Dustats).

Organic anion transporting polypeptide (OATP1B) plays a key role in the hepatic clearance of a majority of high molecular weight (MW) acids and zwitterions. Here, we evaluated the role of OATP1B-mediated uptake in the clearance of novel hypoxia-inducible factor prolyl hydroxylase inhibitors ("Dustats"), which are typically low MW (300-400 daltons) aliphatic carboxylic acids. Five acid dustats, namely daprodustat, desidustat, enarodustat, roxadustat and vadadustat, showed specific transport by OATP1B1/1B3 in transporter-transfected HEK293 cells. Neutral compound, molidustat, was not a substrate to OATP1B1/1B3. None of the dustats showed transport by other hepatic uptake transporters, including NTCP, OAT2 and OAT7. In the primary human hepatocytes, uptake of all acids was significantly reduced by rifampin (OATP1B inhibitor); with an estimated fraction transported by OATP1B (ft ,OATP1B) of up to >80% (daprodustat). Molidustat uptake was minimally inhibited by rifampin; and low permeability acids (desidustat and enarodustat) also showed biliary efflux in sandwich culture human hepatocytes. In vivo, intravenous pharmacokinetics of all 5 acids was significantly altered by a single-dose rifampin (30 mg/kg) in Cynomolgus monkey. Hepatic clearance (non-renal) was about 4-fold (vadadustat) to >11-fod (daprodustat and roxadustat) higher in control group compared to rifampin-treated subjects. In vivo ft ,OATP1B was estimated to be ~70-90%. In the case of molidustat, rifampin had a minimal effect on overall clearance. Rifampin also considerably reduced volume of distribution of daprodustat and roxadustat. Overall, OATP1B significantly contribute to the hepatic clearance and pharmacokinetics of several dustats, which are low MW carboxylic acids. OATP1B activity should therefore by evaluated in this property space. Significance Statement Our in vitro and in vivo results suggest that OATP1B-mediated hepatic uptake play a significant role in the pharmacokinetics of low MW acidic dustats, which are being developed or approved for the treatment of anemia in chronic kidney disease. Significant active uptake mechanisms are not apparent for the neutral compound, molidustat. Characterization of uptake mechanisms is therefore important in predicting human pharmacokinetics and evaluating drug-drug interactions for low MW acids.

Patient-Derived Lung Cancer "Sandwich Cultures" with a Preserved Tumor Microenvironment.

In the past, different spheroid-, organotypic-, and three-dimensional (3D) bioprinting lung cancer models were established for in vitro drug testing and personalized medicine. These tissue models cannot depict the tumor microenvironment (TME) and, therefore, research addressing tumor cell-TME interactions is limited. To overcome this hurdle, we applied patient-derived lung tumor samples to establish new in vitro models. To analyze the tissue model properties, we established two-dimensional (2D) and 3D coculture tissue models exposed to static and dynamic culture conditions that afforded tissue culture for up to 28 days. Our tissue models were characterized by hematoxylin eosin staining, M30 enzyme-linked immunosorbent assay, and immunofluorescence staining against specific lung cancer markers (TTF-1 and p40/p63), cancer-associated fibroblast (CAF) markers (α-SMA and MCT4), and fibronectin (FN). The 3D models were generated with higher success rate than the corresponding 2D model. The cell density of the static 3D model increased from 21 to 28 days, whereas the apoptosis decreased. The dynamic 3D model possessed an even higher cell density than the static 3D model. We identified lung cancer cells, CAFs, and FN. Therefore, a novel in vitro 3D lung cancer model was established, which simulated the TME for 28 days and possessed a structural complexity.

Determining the biocontrol capacities of Trichoderma spp. originating from Turkey on Fusarium culmorum by transcriptional and antagonistic analyses.

In this study aiming to investigate potential fungal biocontrol agents for Fusarium culmorum, several isolates of Trichoderma spp. were evaluated for their antagonistic effects by means of transcriptional analyses. At first, 21 monosporic Trichoderma spp. isolates were obtained from natural wood debris and wood area soils in Manisa, Turkey. Trichoderma spp. Isolates were identified as belonging to four different species (T. atroviride, T. harzianum, T. koningii, and T. brevicompactum) by tef1-α sequencing. Then, the linear growth rate (LGR) of each species was calculated and determined to be in a range between 13.22 ± 0.71 mm/day (T. atroviride TR2) and 25.06 ± 1.45 mm/day (T. harzianum K30). Inter-simple sequence repeat (ISSR) genotyping validated the tef1-α sequencing results by presenting two sub-clusters in the dendrogram. We determined the genetically most similar (TR1 & TR2; 97.77%) and dissimilar (K9 & K17; 40.40%) individuals belonging to the same and different species, respectively. Dual sandwich culture tests (which are useful for antagonism studies) revealed that T. harzianum K21 (the least suppressive) and T. brevicompactum K26 (the most suppressive) isolates suppressed F. culmorum with growth rates of 3% and 46%, respectively. Expressions of genes previously associated with mycoparasitism-plant protection-secondary metabolism (nag1, tgf-1, and tmk-1) were tested by quantitative real-time polymerase chain reaction (qRT-PCR) in both those isolates. While there were no significant differences (p>0.05) in expression that were present in the K21 isolate, those three genes were upregulated with fold change values of 2.69 ± 0.26 (p<0.001), 2.23 ± 0.16 (p<0.001), and 5.38 ± 2.01 (p<0.05) in K26, meaning that the presence of significant alteration in the physiological processes of the fungus. Also, its mycoparasitism potential was tested on Triticum aestivum L. cv Basribey in planta, which was infected with the F. culmorum FcUK99 strain. Results of the trials, including specific plant growth parameters (weight or length of plantlets), confirmed the mycoparasitic potential of the isolate. It can be concluded that (i) nag1, tgf-1, and tmk-1 genes could be approved as reliable markers for evaluation of BCA capacities of Trichoderma spp. and (ii) the T. brevicompactum K26 strain can be suggested as a promising candidate for combating in F. culmorum diseases following the necessary procedures to ensure it is non-hazardous and safe.

Choanocyte dimensions and pumping rates in the demosponge Halichondria panicea

The individual choanocyte pumping rate in choanocyte chambers (CCs) is important for understanding the hydrodynamics in sponges and has hitherto been based on measured volume-specific filtration rate and estimated CC density. However, the CC density may vary in different regions of the sponge and to circumvent this uncertainty and to get precise measurements of the individual choanocyte pumping rate, a new experimental approach was developed. Here the aim was to measure the individual pumping rate of choanocytes based on live dimensions of CC elements and particle tracking to measure the speed of small particles entering into the CCs. This was done by using combined live-cell imaging in sandwich cultures of the marine demosponge Halichondria panicea and video-tracking of particles. Small 2 μm-beads and cyanobacteria (Cyanobium bacillare) in the incurrent canal enter the CCs via a 3.3 ± 0.9 μm diameter prosopyle to be subsequently captured by the choanocytes whereas larger algal cells (Rhodomonas salina) and 10 μm-beads are captured in the incurrent canals. CC diameters were positively correlated to the diameter of choanocytes, indicating a total of 84 choanocytes per CC with mean diameter 22.9 ± 6.2 μm. The pumping rate per choanocyte (Qc) was estimated to be between 54 and 68 μm3 s−1. Regardless of demosponge species and based on data in the literature, a choanocyte is suggested to pump between 50 and 100 μm3 s−1.

Development of lumen-based perfusable 3D liver in vitro model using single-step bioprinting with composite bioinks.

Hepatic sinusoids are uniquely organized structures that help maintain a spectrum of hepatic functions. Although several in vitro liver models have been developed to replicate liver sinusoids, most of these platforms require complex, multi-step fabrication methods making it difficult to achieve truly three-dimensional (3D) channel geometries. In this study, a single-step bioprinting technique was demonstrated to simultaneously print a chip platform and develop a perfusable vascularized liver sinusoid in vitro model. The integrated system uses a co-axial-based bioprinting approach to develop a liver sinusoid-like model that consists of a sacrificial core compartment containing a perfusable pre-vascular structure and an alginate-collagen-based shell compartment containing hepatocytes. The lumen-based perfusable 3D liver sinusoid-on-a-chip (LSOC-P) demonstrated significantly better hepatocyte viability, proliferation, and liver-specific gene and protein expression compared to a 3D hepatocyte-based core/shell model with static media and the standard hepatocyte-based 2D sandwich culture system. A drug toxicity evaluation of hepatotoxins highlighted the comparatively higher sensitivity of the LSOC system with a close estimation of the therapeutic range of safe drug concentrations for humans. In conclusion, the current findings indicate that the combinatorial single-step co-axial bioprinting technique is a promising fabrication approach for the development of a perfusable LSOC platform for drug screening applications.

Sandwich Culture Platforms to Investigate the Roles of Stiffness Gradients and Cell–Matrix Adhesions in Cancer Cell Migration

Given the key role of cell migration in cancer metastasis, there is a critical need for in vitro models that better capture the complexities of in vivo cancer cell microenvironments. Using both two-dimensional (2D) and three-dimensional (3D) culture models, recent research has demonstrated the role of both matrix and ligand densities in cell migration. Here, we leveraged our previously developed 2.5D sandwich culture platform to foster a greater understanding of the adhesion-dependent migration of glioblastoma cells with a stiffness gradient. Using this model, we demonstrated the differential role of stiffness gradients in migration in the presence and absence of adhesion moieties. Furthermore, we observed a positive correlation between the density of cell adhesion moieties and migration, and a diminished role of stiffness gradients at higher densities of adhesion moieties. These results, i.e., the reduced impact of stiffness gradients on adhesion-dependent migration relative to adhesion-independent migration, were confirmed using inhibitors of both mechanotransduction and cell adhesion. Taken together, our work demonstrates the utility of sandwich culture platforms that present stiffness gradients to study both adhesion-dependent and -independent cell migration and to help expand the existing portfolio of in vitro models of cancer metastasis.

Study on drug screening multicellular model for colorectal cancer constructed by three-dimensional bioprinting technology.

The existing in vitro models for antitumor drug screening have significant limitations. Many compounds that inhibit two-dimensional (2D) cultured cells do not exhibit the same pharmacological effects in vivo, thereby wasting human and material resources and time during drug development. Therefore, it is crucial to develop new models. Three-dimensional (3D) bioprinting technology has greater advantages in constructing human tissues than sandwich culture and organoid construction. We used 3D bioprinting technology to construct a 3D multicellular model of SW480 cells, tumor-associated macrophages, and endothelial cells. The biological activities of the model were evaluated by immunofluorescence, hematoxylin and eosin staining of frozen pathological sections, and transcriptome sequencing. Compared with 3D bioprinted single-cell model (3D printing-S), 3D bioprinted multicellular models (3D printing-M) showed significantly improved expression of tumor-related genes, including hub genes IL1B, FCGR2A, FCGR3A, CYBB, SPI1, CCL2, ITGAM, and ITGB2. Antitumor drug screening experiment showed that the IC50 values of 5-FU, oxaliplatin, and irinotecan in 3D printing-S group/2D culture group were 31.13 μM/12.79 μM, 26.79 μM/0.80 μM, and 16.73 μM/10.45 μM, respectively. Compared with the 3D printing-S group, 3D printing-M group was significantly more resistant to chemotherapy.

Primary Hepatocyte Isolation and Cultures: Technical Aspects, Challenges and Advancements.

Hepatocytes are differentiated cells that account for 80% of the hepatic volume and perform all major functions of the liver. In vivo, after an acute insult, adult hepatocytes retain their ability to proliferate and participate in liver regeneration. However, in vitro, prolonged culture and proliferation of viable and functional primary hepatocytes have remained the major and the most challenging goal of hepatocyte-based cell therapies and liver tissue engineering. The first functional cultures of rat primary hepatocytes between two layers of collagen gel, also termed as the "sandwich cultures", were reported in 1989. Since this study, several technical developments including choice of hydrogels, type of microenvironment, growth factors and culture conditions, mono or co-cultures of hepatocytes along with other supporting cell types have evolved for both rat and human primary hepatocytes in recent years. All these improvements have led to a substantial improvement in the number, life-span and hepatic functions of these cells in vitro for several downstream applications. In the current review, we highlight the details, limitations and prospects of different technical strategies being used in primary hepatocyte cultures. We discuss the use of newer biomaterials as scaffolds for efficient culture of primary hepatocytes. We also describe the derivation of mature hepatocytes from other cellular sources such as induced pluripotent stem cells, bone marrow stem cells and 3D liver organoids. Finally, we also explain the use of perfusion-based bioreactor systems and bioengineering strategies to support the long-term function of hepatocytes in 3D conditions.

Optimization of extracellular matrix for primary human hepatocyte cultures using mixed collagen-Matrigel matrices.

Loss of differentiation of primary human hepatocytes (PHHs) ex vivo is a known problem of in vitro liver models. Culture optimizations using collagen type I and Matrigel reduce the dedifferentiation process but are not able to prevent it. While neither of these extracellular matrices (ECMs) on their own correspond to the authentic hepatic ECM, a combination of them could more closely resemble the in vivo situation. Our study aimed to systematically analyze the influence of mixed matrices composed of collagen type I and Matrigel on the maintenance and reestablishment of hepatic functions. Therefore, PHHs were cultured on mixed collagen-Matrigel matrices in monolayer and sandwich cultures and viability, metabolic capacity, differentiation markers, cellular arrangement and the cells' ability to repolarize and form functional bile canaliculi were assessed by reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR), functional assays and immunofluorescence microscopy. Our results show that mixed matrices were superior to pure matrices in maintaining metabolic capacity and hepatic differentiation. In contrast, Matrigel supplementation can impair the development of a proper hepatocytic polarization. Our systematic study helps to compose an optimized ECM to maintain and reestablish hepatic differentiation on cellular and multicellular levels in human liver models.

The effects of hexabromocyclododecane on the transcriptome and hepatic enzyme activity in three human HepaRG-based models

The disruption of thyroid hormone homeostasis by hexabromocyclododecane (HBCD) in rodents is hypothesized to be due to HBCD increasing the hepatic clearance of thyroxine (T4). The extent to which these effects are relevant to humans is unclear. To evaluate HBCD effects on humans, the activation of key hepatic nuclear receptors and the consequent disruption of thyroid hormone homeostasis were studied in different human hepatic cell models. The hepatoma cell line, HepaRG, cultured as two-dimensional (2D), sandwich (SW) and spheroid (3D) cultures, and primary human hepatocytes (PHH) cultured as sandwich were exposed to 1 and 10 µM HBCD and characterized for their transcriptome changes. Pathway enrichment analysis showed that 3D models, followed by SW, had a stronger transcriptome response to HBCD, which is explained by the higher expression of hepatic nuclear receptors but also greater accumulation of HBCD measured inside cells in these models. The Pregnane X receptor pathway is one of the pathways most upregulated across the three hepatic models, followed by the constitutive androstane receptor and general hepatic nuclear receptors pathways. Lipid metabolism pathways had a downregulation tendency in all exposures and in both PHH and the three cultivation modes of HepaRG. The activity of enzymes related to PXR/CAR induction and T4 metabolism were evaluated in the three different types of HepaRG cultures exposed to HBCD for 48 h. Reference inducers, rifampicin and PCB-153 did affect 2D and SW HepaRG cultures’ enzymatic activity but not 3D. HBCD did not induce the activity of any of the studied enzymes in any of the cell models and culture methods. This study illustrates that for nuclear receptor-mediated T4 disruption, transcriptome changes might not be indicative of an actual adverse effect. Clarification of the reasons for the lack of translation is essential to evaluate new chemicals’ potential to be thyroid hormone disruptors by altering thyroid hormone metabolism.

Cold Preservation of Human Hepatocytes with High Viability.

Freshly isolated human hepatocytes are an important model for translational research, validation of experiments done in animals, and preclinical studies. Human hepatocyte isolation often cannot be carried out easily on demand in common research laboratories, and researchers often collaborate to share hepatocytes or outsource hepatocyte isolations. As a prerequisite for such a strategy, hepatocytes have to maintain their phenotypes after transport. Therefore, this study aimed to determine if overnight storage or shipment of hepatocytes affects their quality when viability, adherence, and cytochrome P450 (CYP) activities are considered. Hepatocytes were stored overnight or shipped to a collaborator in a cold storage solution on wet ice. On the next day, viability of hepatocytes was assessed before plating the cells to determine adherence. Hepatocytes were also cultured in a sandwich culture to determine CYP activities and inducibility. The results showed that although viability (79% ± 0.7% on isolation) was significantly decreased by overnight storage or shipment by 11% (p < 0.001) or 15% (p < 0.001), respectively, the viability of hepatocytes the next day at above 64% ± 2.2% remained sufficiently high for further experiments. In addition, hepatocytes stored for 18 or 24 hours were adherent the next day, and a high confluence of 81% ± 10% to 91% ± 4% was achieved after 48 hours in culture when hepatocytes were adhered on collagen-coated plates. Furthermore, CYP enzyme activities were inducible and not affected by variables such as fibrosis, age, type of operation, steatosis, and body mass index. However, our data would suggest that the type of cancer (primary/secondary), sex (male/female), hypertension, glutamic oxaloacetic transaminase activity, partial thromboplastin time, and size of perfused liver had significant effects (p < 0.05) on induction of some CYP enzymes. In conclusion, human hepatocyte isolation can be carried out at a centralized site and shared between multiple researchers, increasing flexibility and access to a representative human liver in vitro model.

Evaluation of Metabolism of a Defined Pesticide Mixture through Multiple In Vitro Liver Models.

The evaluation of exposure to multiple contaminants in a mixture presents a number of challenges. For example, the characterization of chemical metabolism in a mixture setting remains a research area with critical knowledge gaps. Studies of chemical metabolism typically utilize suspension cultures of primary human hepatocytes; however, this model is not suitable for studies of more extended exposures and donor-to-donor variability in a metabolic capacity is unavoidable. To address this issue, we utilized several in vitro models based on human-induced pluripotent stem cell (iPSC)-derived hepatocytes (iHep) to characterize the metabolism of an equimolar (1 or 5 µM) mixture of 20 pesticides. We used iHep suspensions and 2D sandwich cultures, and a microphysiological system OrganoPlate® 2-lane 96 (MimetasTM) that also included endothelial cells and THP-1 cell-derived macrophages. When cell culture media were evaluated using gas and liquid chromatography coupled to tandem mass spectrometry methods, we found that the parent molecule concentrations diminished, consistent with metabolic activity. This effect was most pronounced in iHep suspensions with a 1 µM mixture, and was lowest in OrganoPlate® 2-lane 96 for both mixtures. Additionally, we used ion mobility spectrometry–mass spectrometry (IMS-MS) to screen for metabolite formation in these cultures. These analyses revealed the presence of five primary metabolites that allowed for a more comprehensive evaluation of chemical metabolism in vitro. These findings suggest that iHep-based suspension assays maintain higher metabolic activity compared to 2D sandwich and OrganoPlate® 2-lane 96 model. Moreover, this study illustrates that IMS-MS can characterize in vitro metabolite formation following exposure to mixtures of environmental contaminants.

2D and 3D liver models

2D and 3D liver models

Brief Research Report: Effect of Triiodothyronine on Hepatic Growth Hormone Receptor Expression in Primary Bovine Hepatocytes.

In previous studies, triiodothyronine (T3) was found to be lower in cows with ketosis and an effect of T3 on Growth Hormone Receptor (GHR) expression is described, e. g., in a human hepatoma cell line. Therefore, this study aimed to test whether T3 affects GHR messenger RNA (mRNA) expression in a well-established bovine hepatocyte model. Hepatocytes were kept in a sandwich culture and stimulated for 6 days with constant (10 μg/ml) or decreasing (from 10 to 5 μg/ml) T3 concentrations, and GHR, as well as IGF-1 mRNA expression, was measured using real-time polymerase chain reaction (RT-PCR). We could confirm in vitro that T3 has a stimulatory effect on GHR1A mRNA expression.

Promotion of Cyst Formation from a Renal Stem Cell Line Using Organ-Specific Extracellular Matrix Gel Format Culture System.

Researchers have long awaited the technology to develop an in vitro kidney model. Here, we establish a rapid fabricating technique for kidney-like tissues (cysts) using a combination of an organ-derived extracellular matrix (ECM) gel format culture system and a renal stem cell line (CHK-Q cells). CHK-Q cells, which are spontaneously immortalized from the renal stem cells of the Chinese hamster, formed renal cyst-like structures in a type-I collagen gel sandwich culture on day 1 of culture. The cysts fused together and expanded while maintaining three-dimensional structures. The expression of genes related to kidney development and maturation was increased compared with that in a traditional monolayer. Under the kidney-derived ECM (K-ECM) gel format culture system, cyst formation and maturation were induced rapidly. Gene expressions involved in cell polarities, especially for important material transporters (typical markers Slc5a1 and Kcnj1), were restored. K-ECM composition was an important trigger for CHK-Q cells to promote kidney-like tissue formation and maturation. We have established a renal cyst model which rapidly expressed mature kidney features via the combination of K-ECM gel format culture system and CHK-Q cells.

FEK self-assembled peptide hydrogels facilitate primary hepatocytes culture and pharmacokinetics screening.

A FEFEFKFK (FEK, F, phenylalaninyl; E, glutamyl; K, lysinyl)-based self-assembling peptide hydrogel (FEK-SAPH) was developed to replace sandwich culture (SC) for improved culture of primary hepatocytes in vitro. Under neutral conditions, FEK self-assembles to form β-sheet nanofibers, which in turn form FEK-SAPH. For the culture of rat primary hepatocytes (RPH), the use of FEK-SAPH simplified operation steps and promoted excellent cell-cell interactions while maintaining the SC-related RPH polarity trend. Compared with SC, FEK-SAPH cultured RPH for 14 days, the bile duct network was formed, the secretion of albumin and urea was improved, and the metabolic clearance rate based on cytochrome P450 (CYPs) was comparable. In FEK-SAPH culture, the expression level of the biliary efflux transporter bile salt export pump increased by 230.7%, while the biliary excretion index value of deuterium-labeled sodium taurocholate (d8-TCA) differed slightly from the SC value (72% and 77%, respectively, p= .0195). The inhibitory effect of cholestasis drugs on FEK-SAPH was significantly higher than that of SC. In FEK-SAPH, hepatoprotective drugs were more effective in antagonizing hepatotoxicity induced by lithocholic acid (LCA). FEK-SAPH cultured RPH with hepatoprotective drugs can better recover from LCA-induced damage. In summary, FEK-SAPH can be used as a substitute for SC for pharmacokinetic screening to evaluate the drug absorption, disposition, metabolism, excretion, and toxicity (ADMET) in hepatocytes.

Spatially arranged encapsulation of stem cell spheroids within hydrogels for the regulation of spheroid fusion and cell migration

Mesenchymal stem cell spheroids have been encapsulated in hydrogels for various applications because spheroids demonstrate higher cell activity than individual cells in suspension. However, there is limited information on the effect of distance between spheroids (inter-spheroid distance) on fusion or migration in a hydrogel. In this study, we developed temperature-responsive hydrogels with surface microwell patterns to culture adipose-derived stem cell (ASC) spheroids and deliver them into a Matrigel for the investigation of the effect of inter-spheroid distance on spheroid behavior. The ASC spheroids were encapsulated successfully in a Matrigel, denoted as sandwich culture, with a specific inter-spheroid distance ranging from 100 to 400 µm. Interestingly, ASCs migrated from the host spheroid and formed a bridge-like structure between spheroids, denoted as a cellular bridge, only when the inter-spheroid distance was 200 µm. Thus, we performed a sandwich culture of human umbilical vein endothelial cells (HUVECs) and ASCs in co-cultured spheroids in the Matrigel to create a homogeneous endothelial cell network in the hydrogel. The HUVECs sprouted through the ASC cellular bridge and directly interacted with the adjacent spheroid when the inter-spheroid distance was 200 µm. Similar results were obtained from an in vivo study. Thus, our study suggests the appropriate inter-spheroid distance for effective spheroid encapsulation in a hydrogel. Statement of significanceRecently, spheroid-based 3D tissue culture techniques such as spheroid encapsulation or 3D printing are being intensively investigated for various purposes. However, there is limited research regarding the effect of the inter-spheroid distance on spheroid communication. Here, we demonstrate a spatially arranged spheroid encapsulation method within a Matrigel by using a temperature-responsive hydrogel. Human adipose-derived stem cell spheroids are encapsulated with a precisely controlled inter-spheroid distance from 100 to 400 µm and show different tendencies in cell migration and spheroid fusion. Our results suggest that the inter-spheroid distance affects spheroid communication, and thus, the inter-spheroid distance needs to be considered carefully according to the purpose.