Single-walled Carbon Nanotubes Samples Research Articles

UV-Vis quantification of the iron content in iteratively steam and HCl purified single-walled carbon nanotubes.

As-produced carbon nanotubes contain impurities which can dominate the properties of the material and are thus undesired. Herein we present a multi-step purification treatment that combines the use of steam and hydrochloric acid in an iterative manner. This allows the reduction of the iron content down to 0.2 wt. % in samples of single-walled carbon nanotubes (SWCNTs). Remarkably, Raman spectroscopy analysis reveals that this purification strategy does not introduce structural defects into the SWCNTs' backbone. To complete the study, we also report on a simplified approach for the quantitative assessment of iron using UV-Vis spectroscopy. The amount of metal in SWCNTs is assessed by dissolving in HCl the residue obtained after the complete combustion of the sample. This leads to the creation of hexaaquairon(III) chloride which allows the determination of the amount of iron, from the catalyst, by UV-Vis spectroscopy. The main advantage of the proposed strategy is that it does not require the use of additional complexing agents.

Review of: "bulk samples of single-walled carbon nanotubes as well as for multi-walled single nanotubes"

Review of: "bulk samples of single-walled carbon nanotubes as well as for multi-walled single nanotubes"

Электрохимические сенсоры на основе сеток из однослойных углеродных нанотрубок для вольтамперометрического определения аскорбиновой кислоты

Modern highly sensitive and selective sensors are able to determine biologically active substances, which makes this direction one of the most popular areas of analytical chemistry. The study featured the electrochemical properties of new fiber materials based on single-wall carbon nanotubes with prospects of using them in the voltammetry of ascorbic acid. 
 The authors developed a new technology to synthesize films from disordered single-wall carbon nanotubes by chemical vapor deposition. Fibers were produced from a solvent by wet-pulling of single-wall carbon nanotubes networks. Thin films of randomly oriented single-wall carbon nanotube bundles were deposited downstream of a floating aerosol CVD reactor, which included a high temperature furnace with a quartz tube. The synthesis of the single-wall carbon nanotube samples was performed at 825°C. Ethanol served as carbon source while ferrocene was used as catalyst precursor. The single-wall carbon nanotubes were collected on a nitrocellulose filter in the form of films with transmittances of 10% in the middle of the visible wavelength (550 nm). The method was optimized to involve air annealing at 300–320°C and a treatment with strong inorganic acids, i.e., HCl, HNO3 + H2SO4. The voltammetric curves recording included background electrolyte, scan rate, and preconditioning. These parameters were selected experimentally to obtain the maximal sensor response to ascorbic acid content. The anodic peak of ascorbic acid in the phosphate buffer electrolyte (pH 6.86) was observed at a potential of +0.2 V. The current and peak area of ascorbic acid oxidation depended neither on the time nor on the conditioning potential of the sensor. The linear dependences of these parameters on the concentration of ascorbic acid stayed within 50–500 μmol/L (8.8–90 mg/L) at a scan rate of 0.1 mV/s. The single-wall carbon nanotube microsensor had a length of 0.5 cm and an average width of 400 μm. Its sensitivity was two times as high as that of a disk glassy carbon electrode with a diameter of 5 mm. 
 The experimental sensors proved effective in determining ascorbic acid in food products, pharmaceuticals, and biological fluids.

Review of: "The results of laboratory experiments also indicate the presence of this feature in mass samples of single-walled carbon nanotubes"

Review of: "The results of laboratory experiments also indicate the presence of this feature in mass samples of single-walled carbon nanotubes"

Unified Quantification of Quantum Defects in Small-Diameter Single-Walled Carbon Nanotubes by Raman Spectroscopy.

The covalent functionalization of single-walled carbon nanotubes (SWCNTs) with luminescent quantum defects enables their application as near-infrared single-photon sources, as optical sensors, and for in vivo tissue imaging. Tuning the emission wavelength and defect density is crucial for these applications. While the former can be controlled by different synthetic protocols and is easily measured, defect densities are still determined as relative rather than absolute values, limiting the comparability between different nanotube batches and chiralities. Here, we present an absolute and unified quantification metric for the defect density in SWCNT samples based on Raman spectroscopy. It is applicable to a range of small-diameter semiconducting nanotubes and for arbitrary laser wavelengths. We observe a clear inverse correlation of the D/G+ ratio increase with nanotube diameter, indicating that curvature effects contribute significantly to the defect activation of Raman modes. Correlation of intermediate frequency modes with defect densities further corroborates their activation by defects and provides additional quantitative metrics for the characterization of functionalized SWCNTs.

(Invited) Advanced Carbon Nanotube Fluorescence Spectrometry for Novel Applications

Instrumental advances in near-IR fluorescence spectroscopy are enabling new types of measurements involving single-wall carbon nanotubes (SWCNTs). Two unique systems will be described. The first is a two-dimensional fluorescence-detected circular dichroism (FDCD) spectrometer. In this, SWCNT samples are excited by a spectrally selected supercontinuum laser beam that is switched between left- and right-circular polarization in an electro-optic modulator. Near-infrared sample fluorescence emitted in the backward direction is captured and directed to a scanning monochromator with a cooled InGaAs single-channel detector. After amplification and high precision digitization, the modulated signal component is extracted by computer-based phase sensitive detection. The system can measure a sample’s E22 circular dichroism in four spectral modes: 1) conventional FDCD, with scanned visible excitation wavelength and spectrally integrated (zero-order grating) emission detection; 2) Emission-specific FDCD, with scanned visible excitation wavelengths and selected emission wavelength; 3) Emission-scanned FDCD, with selected visible excitation wavelength and scanned emission wavelengths; 4) Excitation-Emission FDCD, with excitation and emission wavelengths both scanned to give two-dimensional data sets. This instrument can spectroscopically resolve enantiomer signals from a single (n,m) species in a racemic SWCNT sample.In a parallel project, developments in SWCNT fluorescence spectrometry are advancing nanotube-based strain measurement technology toward commercialization. Because SWCNT emission wavelengths vary systematically with axial strain, nanotubes in a thin coating on a specimen can serve as optically interrogated strain gauges. We apply this effect to measure strain maps through hyperspectral imaging of SWCNT fluorescence. A rotated band pass filter is used to capture a set of images in multiple spectral slices, from which a custom computer program deduces strain at each of ~105 image pixels and compiles strain maps. We will describe how this apparatus has evolved from a lab prototype into a compact portable system that can make measurements in industrial settings.

(Invited) Diameter-Dependent Stacking of Squaraine Dye Molecules inside Chirality-Sorted Single-Wall Carbon Nanotubes

Filling of single-wall carbon nanotubes (SWCNTs) with organic dye molecules is a promising strategy to add new functionalities, for instance by aligning dipolar dyes in a one-dimensional (1D) head-to-tail coupled chain to obtain a giant enhancement of their nonlinear optical response,[1] or by photo-sensitizing the tubes in new wavelength ranges by excitation energy transfer (EET) from the dye to the SWCNTs, useful for photo-conversion applications.[2] The 1D stacking of molecules inside SWCNTs modulates both the properties of the molecules and of the SWCNTs. We found that the EET of squaraine-dye-filled SWCNTs reveals a pronounced SWCNT-diameter-dependence of the dye absorption, indicating a diameter-dependent stacking. By performing IR fluorescence excitation spectroscopy on a range of chirality-enriched samples of dye-filled SWCNTs with different chirality distributions, each shifted dye absorption wavelength observed through the EET can be unambiguously assigned to a specific encapsulating SWCNT chirality.[3] This reveals a systematic trend with diameter that can be associated with the J-aggregate- and H-aggregate-like interactions expected in close-packed single- and double-file stackings, as corroborated by a simple geometric model, and enables tuning of the optical properties of the 1D molecular arrays through the selection of proper SWCNT diameters.[1] S. Cambré, J. Campo, C. Beirnaert, C. Verlackt, P. Cool, W. Wenseleers, Nature Nanotechnol. 10(3) 248-252 (2015). [2] S. van Bezouw, D.H. Arias, R. Ihly, S. Cambré, A.J. Ferguson, J. Campo, J.C. Johnson, J. Defillet, W. Wenseleers, J.L. Blackburn, ACS Nano 12(7) 6881-6894 (2018). [3] S. Forel, H. Li, S. van Bezouw, J. Campo, L. Wieland, W. Wenseleers, B.S. Flavel, S. Cambré, Nanoscale 14, 8385-8397 (2022).

(Invited) Stochasticity in the Number of Quantum Defects in Fluorescent Carbon Nanotubes

Single wall carbon nanotubes (SWCNTs) display chirality dependent near infrared (NIR) fluorescence. Their optoelectronic properties can be further tuned by incorporating quantum defects/organic color centers (OCC) via reactions with diazonium salts. The absolute number of defects per SWCNT determines the properties but is not exactly known. Measuring it is complicated because typical SWCNT samples contain multiple chiralities, that congest the spectra and prevents to distinguish defects from different chiralities. Aqueous two-phase extraction (APTE) is a powerful technique to isolate specific chiralities. Here, we show that quantum defects do not affect APTE, which indicates that the chemical potential is not substantially affected and pinpoints to low numbers of defects. The purity of (6,5)-SWCNTs allows us to image the NIR fluorescence contributions (E11 below 1050 nm, and E11 * above 1050 nm) on the single SWCNT level and defect incorporation itself on the single molecule level. Interestingly, one observes a stochastic distribution of the numbers of defects, which can be explained by a Poisson distribution. We find a mean number of defects of 0-3 per SWCNT. These results indicate the large variance between ensemble and single particle picture. In summary, we show that single quantum defects can be counted by NIR imaging and that stochasticity plays a crucial role for their optical properties.

DNA-Surfactant Exchange and Quantifying Interactions of Pure (n,m) Single-Enantiomer SWCNTs Towards Biohybrid Self-Assembly

Self-assembled biohybrid nanostructures made from single-wall carbon nanotubes (SWCNTs) and DNA are a promising model system for studying fundamental photo physics phenomena, and have significant potential as building blocks for applications such as biosensing and photovoltaics devices. Precise control of SWCNT bandgap and length in these biohybrid assemblies is highly desirable, but scalable production of such samples often benefits from processing in aqueous polymer and surfactant solutions that are then typically incompatible with DNA-directed assembly. DNA exchange is a promising route for replacing surfactants with self-assembling DNA sequences after these purification steps. Unfortunately, despite advances, DNA exchange remains a challenging technique with limitations due to uncontrolled aggregation and low yields. In this work we focus on improving the process for several well-defined SWCNT samples that are both single chirality and single enantiomer refined through aqueous two-phase separation as well as length sorted to a narrow distribution. With these, we demonstrate improvements in DNA exchange in both yield and control of the aggregation state by modifying DNA exchange processing parameters. We also show that the exchanged DNA-wrapped SWCNTs can be linked together by the addition of a complementary DNA bridge to form self-assembled biohybrid nanostructures for energy transfer studies. We use analytical ultracentrifugation and absorbance and photoluminescence spectroscopies to measure and quantify changes in as these biohybrid structures self-assemble. These developments pave the way for high yield assembly of precise biohybrid nanostructures for energy transfer studies and open potential applications in photovoltaics and biosensing.

(Invited) Efficient Inner-to-Outer Wall Energy Transfer in Highly Pure Double-Wall Carbon Nanotubes Revealed by Detailed Spectroscopy

The coaxial stacking of two single-wall carbon nanotubes (SWCNTs) into a double-wall carbon nanotube (DWCNT), forming a so-called one-dimensional van der Waals structure, leads to synergetic effects that dramatically affect the optical and electronic properties of both layers [1]. In this work, we explore these effects in purified DWCNT samples by combining absorption, wavelength-dependent infrared fluorescence−excitation (PLE), and wavelength-dependent resonant Raman scattering (RRS) spectroscopy. Purified DWCNTs are obtained by careful solubilization that strictly avoids ultrasonication [2] or by electronic-type sorting [3], both followed by a density gradient ultracentrifugation to remove unwanted SWCNTs that could obscure the DWCNT characterization [2]. Chirality-dependent shifts of the radial breathing mode vibrational frequencies and transition energies of the inner and outer DWCNT walls with respect to their SWCNT analogues are determined by advanced two-dimensional fitting of RRS and PLE data of DWCNT and their reference SWCNT samples. This exhaustive data set verifies that fluorescence from the inner DWCNT walls of well-purified samples is severely quenched, as previously evidenced in single-tube experiments [4]. Moreover, we find that this quenching occurs through efficient energy transfer from the inner to the outer DWCNT walls [5]. Combined analysis of the PLE and RRS results further reveals that this transfer is dependent on the inner and outer wall chirality, and we identify the specific combinations dominant in our DWCNT samples. These obtained results demonstrate the necessity and value of a combined structural characterization approach including PLE and RRS spectroscopy for bulk DWCNT samples.[1] S. Cambré et al, Small 2021, 17, 2102585[2] M. Erkens et al, Carbon 2021, 185, 113[3] H. Li et al, Nature Nanotechnol. 2017, 12, 1176[4] D. Levshov et al, Phys. Rev. B 2017, 96, 195410[5] M. Erkens et al, ACS Nano 2022, 16, 16038

Raman Characterization of Guanine Functionalized SWCNTs

Single-walled carbon nanotubes (SWCNTs) have unique photophysical properties that render them an important class of materials for future nanoelectronics and bio-nano sensor applications. A method was recently discovered for making spatially patterned modifications to SWCNT band gaps and thereby modulating their electronic and optical properties in a controlled manner. The reaction used for this is called guanine functionalization.1 It is achieved by generating singlet oxygen in a dispersion of SWCNTs coated with single-stranded DNA, resulting in covalent bond formation between the guanine nucleobases in the DNA coatings and the nanotube sidewalls. Each of the many covalently bonded guanine sites acts as a weak exciton trap, causing red-shifted SWCNT emission and absorption spectra. Fluorescence spectroscopy shows that the extent of guanine functionalization can depend strongly on SWCNT structure, but spectral broadening can hamper the precise deconvolution of emission features of different (n,m) species. To track such covalent functionalization through Raman scattering, the D to G band ratios are commonly used as a measure of sp3 defect density and therefore of the functionalization extent. However, this conventional Raman method cannot show which (n,m) species in unsorted samples have been functionalized, because they all contribute to the D and G band signals. We will describe a novel Raman analysis based on the relative intensities of bands that have shifts located between the RBM and D regions. These Raman features are found to be diameter-specific, allowing estimation of (n,m)-resolved functionalization extents in unsorted SWCNT samples. In addition, we will present an assignment and interpretation of the relevant Raman features. Zheng, Y.; Bachilo, S. M.; Weisman, R. B., Controlled patterning of carbon nanotube energy levels by covalent DNA functionalization. ACS Nano 2019, 13, 8222-8228.

Stochastic Formation of Quantum Defects in Carbon Nanotubes.

Small perturbations in the structure of materials significantly affect their properties. One example is single wall carbon nanotubes (SWCNTs), which exhibit chirality-dependent near-infrared (NIR) fluorescence. They can be modified with quantum defects through the reaction with diazonium salts, and the number or distribution of these defects determines their photophysics. However, the presence of multiple chiralities in typical SWCNT samples complicates the identification of defect-related emission features. Here, we show that quantum defects do not affect aqueous two-phase extraction (ATPE) of different SWCNT chiralities into different phases, which suggests low numbers of defects. For bulk samples, the bandgap emission (E11) of monochiral (6,5)-SWCNTs decreases, and the defect-related emission feature (E11*) increases with diazonium salt concentration and represents a proxy for the defect number. The high purity of monochiral samples from ATPE allows us to image NIR fluorescence contributions (E11 = 986 nm and E11* = 1140 nm) on the single SWCNT level. Interestingly, we observe a stochastic (Poisson) distribution of quantum defects. SWCNTs have most likely one to three defects (for low to high (bulk) quantum defect densities). Additionally, we verify this number by following single reaction events that appear as discrete steps in the temporal fluorescence traces. We thereby count single reactions via NIR imaging and demonstrate that stochasticity plays a crucial role in the optical properties of SWCNTs. These results show that there can be a large discrepancy between ensemble and single particle experiments/properties of nanomaterials.

Acid-modified CNT/Zinc Oxide nanowires based high performance broadband photodetector

In this study, the authors have reported the impact of post-treatment via exposure to acid on single walled carbon nanotubes (SWNTs) thin film (TF) based SWNT/ZnO Nanowire (NW) broad band photodetector. The ZnO NWs were deposited on SWNT (with and without acid-treated) using a simple catalytic free process called glancing angle deposition (GLAD) technique. Acid-treated SWNT samples warranted the growth of high quality ZnO NWs over them. On fabricating photodetectors with the acid-treated ZnO NW/SWNT TF heterostructure (HS) gave better device performance as compared to the as-deposited ZnO NW/SWNT TF HS (without acid-treatment) sample. The acid-treated device showed a large responsivity (85.45 A/W), specific detectivity (0.859 × 1012 Jones) and with a low noise equivalent power of 3.9101 pW values. Moreover, the oxygen adsorption–desorption mechanism in SWNTs impacted the electrical resistance of the nanotubes which affected nanotube conductivity. The acid-treatment favoured relatively faster charge separation at the ZnO NW/SWNT heterojunction thus providing a fast device response (trise = 0.11 s, tfall = 0.39 s at + 5 V). The fabricated acid-treated device showed good broad band detection (250 nm-750 nm) which was explained with respect to the optical absorption profile of the sample.

Chirality Dependence of Triplet Excitons in (6,5) and (7,5) Single-Wall Carbon Nanotubes Revealed by Optically Detected Magnetic Resonance.

The excitonic structure of single-wall carbon nanotubes (SWCNTs) is chirality dependent and consists of multiple singlet and triplet excitons (TEs) of which only one singlet exciton (SE) is optically bright. In particular, the dark TEs have a large impact on the integration of SWCNTs in optoelectronic devices, where excitons are created electrically, such as in infrared light-emitting diodes, thereby strongly limiting their quantum efficiency. Here, we report the characterization of TEs in chirality-purified samples of (6,5) and (7,5) SWCNTs, either randomly oriented in a frozen solution or with in-plane preferential orientation in a film, by means of optically detected magnetic resonance (ODMR) spectroscopy. In both chiral structures, the nanotubes are shown to sustain three types of TEs. One TE exhibits axial symmetry with zero-field splitting (ZFS) parameters depending on SWCNT diameter, in good agreement with the tighter confinement expected in narrower-diameter nanotubes. The ZFS of this TE also depends on nanotube environment, pointing to slightly weaker confinement for surfactant-coated than for polymer-wrapped SWCNTs. A second TE type, with much smaller ZFS, does not show the same systematic trends with diameter and environment and has a less well-defined axial symmetry. This most likely corresponds to TEs trapped at defect sites at low temperature, as exemplified by comparing SWCNT samples from different origins and after different treatments. A third triplet has unresolved ZFS, implying it originates from weakly interacting spin pairs. Aside from the diameter dependence, ODMR thus provides insights in both the symmetry, confinement, and nature of TEs on semiconducting SWCNTs.

High Sensitivity Near-Infrared Imaging of Fluorescent Nanosensors.

Biochemical processes are fast and occur on small-length scales, which makes them difficult to measure. Optical nanosensors based on single-wall carbon nanotubes (SWCNTs) are able to capture such dynamics. They fluoresce in the near-infrared (NIR, 850-1700nm) tissue transparency window and the emission wavelength depends on their chirality. However, NIR imaging requires specialized indium gallium arsenide (InGaAs) cameras with a typically low resolution because the quantum yield of normal Si-based cameras rapidly decreases in the NIR. Here, an efficient one-step phase separation approach to isolate monochiral (6,4)-SWCNTs (880nm emission) from mixed SWCNT samples is developed. It enables imaging them in the NIR with high-resolution standard Si-based cameras (>50× more pixels). (6,4)-SWCNTs modified with (GT)10 -ssDNA become highly sensitive to the important neurotransmitter dopamine. These sensors are 1.7× brighter and 7.5× more sensitive and allow fast imaging (<50ms). They enable high-resolution imaging of dopamine release from cells. Thus, the assembly of biosensors from (6,4)-SWCNTs combines the advantages of nanosensors working in the NIR with the sensitivity of (Si-based) cameras and enables broad usage of these nanomaterials.

Исследование процесса гидрогенизации одностенных углеродных нанотрубок с помощью индукционно-связанной аргон-водородной плазмы

In this article it was demonstrated the possibility of partial hydrogenation of single-walled carbon nanotubes using an inductively coupled argon-hydrogen plasma. It was studied the changes in the Raman spectrum of samples of single-walled carbon nanotubes during plasma hydrogen intercalation with depending on the treatment time, the discharge power, the substrate material on which the nanotubes were deposited, and the control external voltage. The predominant role of hydrogen ions in the hydrogenation of single-walled carbon nanotubes has been demonstrated.

Diameter-Dependent Semiconducting Carbon Nanotube Network Transistor Performance

Single-walled carbon nanotube (SWCNT) network based devices show application potentials due to their extraordinary electric and optical properties, and the device performance is largely determined by the network morphology and tube–tube junction interactions. In this work, five SWCNT samples with narrow bandgap distributions covering a wide diameter range of 0.7–1.6 nm were purified by the conjugated polymer extraction (CPE) process. Both chirality distribution and semiconducting purity of these samples were systematically characterized by optical methods. Uniform high density network based thin film transistors (TFTs) were fabricated, and their performance can be related to tube bandgap/diameter and defects density or tube length. The diameter-dependent tube–tube junction resistance, the most important parameter for nanowire network devices, was extracted using a network predictive model. It was found that junction resistance inversely scales with tube diameter and is about 2 orders of magnitude higher than tube intrinsic resistance. The impacts of network morphology, tube diameter, and length on their network TFT performance were further discussed. We hope these results can provide some guideline to address various application challenges for SWCNT network based devices.

Energy-Efficient Chemiresistive Sensor Array Based on SWCNT Networks, WO3 Nanochannels and SWCNT-Pt Heterojunctions for NH3 Detection against the Background Humidity

Recently, promising results have been achieved in improving the sensitivity to ammonia in gas sensors through the use of structures composed of heterojunctions or nanochannels. However, their sensitivity is highly dependent on the background humidity under air conditions. The sensor structures which could ensure selective ammonia detection with a low detection limit, despite interference from changing background humidity, remain highly demanded. In this work, we consider sensing units containing (i) nanochannels formed by a continuous tungsten oxide nanolayer to appear in contact between single-walled carbon nanotubes (SWCNTs) and a Pt sublayer and (ii) SWCNT-Pt junctions in frames of mass-scale microelectronic technologies. SWCNTs were deposited by spray-coating on a thin WO3/Pt/W sublayer formed by a photolithographic pattern to be accompanied by satellite samples with just SWCNTs for reference purposes. We elucidate the specific differences that appeared in the response of sensors based on SWCNT-Pt junctions and WO3 nanochannels relative to satellite SWCNT samples with a similar SWCNT network density. Particularly, while a similar response to NH3 vapors mixed with dry air is observed for each sensor type, the response to NH3 is reduced significantly in the presence of background humidity, of 45 rel.%, especially in the case of WO3 nanochannel structures even at room temperature. A multisensor array based on the four various sensing structures involving SWCNT-Pt junctions, WO3 nanochannels, and their satellite-only-SWCNT ones allowed us to determine a correct ammonia concentration via utilizing the linear discriminant analysis despite the presence of background air humidity. Thus, such an energy-efficient multisensor system can be used for environmental monitoring of ammonia content, health monitoring, and other applications.

Compositional Analysis of ssDNA-Coated Single-Wall Carbon Nanotubes through UV Absorption Spectroscopy.

Aqueous suspensions of single-wall carbon nanotubes (SWCNTs) coated by ssDNA are analyzed using UV absorption and total carbon measurements. The results give absolute average concentrations of both components in samples without free ssDNA. From those values, the average mid-UV SWCNT absorptivity is deduced for three different batches of relatively small diameter nanotubes: two HiPco and one CoMoCAT. The absorptivity values enable the use of simple spectrophotometry to measure absolute concentrations of similar SWCNT samples in aqueous SDS. The results also quantify the mass ratio of ssDNA to SWCNT, defining the average number of nanotube carbon atoms suspended by one ssDNA strand of T15GT15 or T30G. Comparing this experimental parameter with results from replica exchange molecular dynamics simulations of one ssDNA strand freely adsorbed on a (6,5) segment shows close agreement between the computed number of SWCNT atoms covered per strand and the measured number of SWCNT atoms suspended per strand.

Optimization of ssDNA-SWCNT Ultracentrifugation via Efficacy Measurements

Photoluminescent single-walled carbon nanotubes (SWCNT) hold substantial potential for a variety of applications in biology and medicine. Improved preparation of such materials requires optimization of various parameters, including those pertaining to ultracentrifugation techniques for removing non-photoluminescent carbonaceous materials. In this work, we investigated single-stranded DNA (ssDNA)-SWCNT preparations, which are widely used and exhibit strong photoluminescence (PL). We found, however, that total PL is not well-described by SWCNT concentration, and that it is much more sufficiently described by a comparison of SWCNT E22 transition peaks with surrounding baseline absorbance from non-fluorescent carbonaceous material. We used this metric, defined as efficacy, in optimizing techniques for centrifugation and subsequent fractionation. We found that increased centrifugal forces removed substantial non-photoluminescent material, but also more SWCNT mass, yielding less-concentrated but more-pure fluorescent SWCNT samples. Thus, a tradeoff exists between decreased sensor material and increased sensor quality, one which might be considered for each novel SWCNT-based nanosensor construct. We anticipate these studies serving as a basis for improved applied nanosensor development.