Liquid Crystal Samples Research Articles

The Impact of Phospholipid-Based Liquid Crystals' Microstructure on Stability and Release Profile of Ascorbyl Palmitate and Skin Performance.

The drug delivery potential of liquid crystals (LCs) for ascorbyl palmitate (AP) was assessed, with the emphasis on the AP stability and release profile linked to microstructural rearrangement taking place along the dilution line being investigated by a set of complementary techniques. With high AP degradation observed after 56 days, two stabilization approaches, i.e., the addition of vitamin C or increasing AP concentration, were proposed. As a rule, LC samples with the lowest water content resulted in better AP stability (up to 52% of nondegraded AP in LC1 after 28 days) and faster API release (~18% in 8 h) as compared to the most diluted sample (29% of nondegraded AP in LC8 after 28 days, and up to 12% of AP released in 8 h). In addition, LCs exhibited a skin barrier-strengthening effect with up to 1.2-fold lower transepidermal water loss (TEWL) and 1.9-fold higher skin hydration observed in vitro on the porcine skin model. Although the latter cannot be linked to LCs' composition or specific microstructure, the obtained insight into LCs' microstructure contributed greatly to our understanding of AP positioning inside the system and its release profile, also influencing the overall LCs' performance after dermal application.

Analysing the Photo-Physical Properties of Liquid Crystals

Intrinsically fluorescent liquid crystals are highly sought after for a variety of applications. Most of the measurements of photo-physical properties of liquid crystals are made in dilute solutions, which is mainly due to the relative ease of both these measurements and the interpretation of data. The fluorescence spectra depend on a number of parameters including the concentration in liquid crystal solutions, the device geometry, and the mesophase in which the spectra have been measured. Working with neat, or concentrated, liquid crystal samples adds experimental complexities such as the inner filter effect (IFE), which affects the collection of data, interpretation of the results, and accuracy of the conclusions. In this paper, we present a systematic study of the photo-physical properties of both a model reference material, Nile red, and a nematic liquid crystal, 4-cyano-4′-pentylbiphenyl (5CB). The influence on the emission spectra of an increasing solute concentration is investigated and discussed. Moreover, a detailed investigation of the influence of the used device geometry, as well as the choice of appropriate data fitting methodologies, are presented.

Novel Schiff's base liquid crystalline trifluoromethoxy aniline derivatives of cinnamoyl ester

A novel homologous series of cinnamoyl ester encompassing of twelve homologues liquid crystal samples containing 4′-trifluoromethoxy aniline moiety have been designed and developed to understand their mesophase analysis using polarizing optical microscope, differential scanning calorimetry, spectral analysis and density functional theory approach. The prepared each samples show nematic-smectic A phase with good temperature range of mesophase affected by the variation of side alkyl chains. In addition, present LC samples of cinnamoyl ester trifluro derivatives were tested for their antimicrobial performance and the obtained results reveals a good biological potential for the studied LC homologous series.

Investigation of solute-solvent interactions of 4′-alkyl-4-cyanobiphenyl liquid crystals using Raman spectroscopy

Liquid crystal materials possess hybrid liquid and solid-like properties with high response to stimuli. The 4′-alkyl-4-cyanobiphenyls (nCB) are an important class of liquid crystals that are widely used for various applications. In this study, six alkylcyanobiphenyl liquid crystal samples (5CB to 10CB) were examined using Raman spectroscopy in a total of twelve solvents of various polarities. The distinctive bands contributed by the LC sample are from C≡N stretch, C–C aromatic ring breathing, C–C biphenyl linking stretch, and C–H in-plane deformation. These modes are found to be responsive to different solvent environments by shifting positions. For instance, the cyano stretching mode of 5CB is blue-shifted from 2229 cm−1 for the pure sample to 2233 cm−1 when measured in hexane due to the repulsive interaction between the mode and the solvent bath. On the other hand, this mode undergoes a red-shift to 2220 cm−1 in methanol due to hydrogen bond interaction between the mode and solvent molecules. Overall, the shift in the position of the vibrational modes of nCB molecules was correlated with solvent properties such as acceptor number, donor number, and Kamlet-Taft dipolarity constants, which are a measure of solvent polarity. In samples with longer alkyl chains (8CB, 9CB, and 10CB), the wavenumber of the stretching modes was generally shifted to around the same position in all the solvents. Such observations are related to the folding back effect and enhanced dimerization constant with an increase in the chain length.

Enhanced liquid crystal performance through alkoxybenzoic acid doping

ABSTRACT This study investigates the impact of doping agents, 4-octyloxybenzoic acid (8OBA) and 4-octyloxy-3-fluoro benzoic acid (8OBAF), on the thermodynamic and electro-optical properties of the nematic liquid crystal 5CB. The differential scanning calorimetry, dielectric, and polarising optical microscopic measurements revealed intriguing properties. The doped liquid crystal samples exhibit higher phase transition temperatures, increasing birefringence, and order parameters. Dielectric measurements disclose reduced free ion concentration with 8OBA and increased concentration with 8OBAF in the liquid crystal matrix. The threshold voltage, switching time, and rotational viscosity were also diminished in the 5CB + 8OBA mixture, whereas these parameters were increased in the 5CB + 8OBAF mixture due to the strong intermolecular interaction with liquid crystals. The results presented here demonstrate that 8OBA dopant can be used to achieve high thermal stability of the nematic liquid crystal phase with fast response times and low threshold.

Enhanced dielectric, electrical and electro-optical properties: Towards understanding the interaction in mesophases of 8OCB liquid crystal dispersed with CdSe/ZnS quantum dots

The current advancements in developing new liquid crystalline materials for the next generation applications focus mainly on improving the physical characteristics of the liquid crystal (LC) systems. Recent progress has shown that the functionalized nanoparticles embedded in LC matrices can significantly alter the characteristics of the LC material based on the mutual interaction between the host molecules and guest particles. In this aspect, the present study reports the impact of dispersing core-shell type CdSe/ZnS quantum dots (QDs) on the dielectric, electrical and electro-optical properties of the 8OCB LC doped at various concentrations. The doped samples exhibit an ion releasing behavior and this effect becomes more evident as the doping concentration increases up to 0.2 wt% in the LC system. It is explained as a result of the growing tactoid-like ellipsoidal form acquired by QDs owing to the enhanced mutual interaction among QD ligands and rod-like LC molecules. The temperature variation of the diffusion constant, conductivity, ionic mobility and mean relaxation time of ions significantly follows each other in all the studied samples. Moreover, thermal profiles of the dielectric anisotropy, threshold voltage and splay elastic constant show a decreasing pattern with an increment in doping concentration. A dual-relaxation regime is experimentally investigated, corresponding to the contribution of nematic director and dimers, providing two kinds of rotational viscosity in the pristine and QDs dispersed LC samples. The transmittance-voltage curve reveals the presence of residual value in the dispersed samples and is related to the volatile memory effect. A slight enhancement is observed in the photoluminescence intensity for the lower doped sample and reduces further with increasing doping concentration in the pristine LC system. All these findings suggest the considerable contribution of functionalized QDs to the studied properties in terms of interaction between the LC and dopant material. This study will further elucidate the selection of optimal QDs concentration based on the required properties for their potential applications in futuristic devices based on LCs.

Mesophase analysis, DFT calculation and microbial activity of a novel mesomorphic homologous series with ethyl 4-aminobenzoate

A novel homologous series of cinnamoyl ester comprising of elven (C1 to C16) homologues liquid crystal (LC) samples have been synthesized and characterized using instrumental methods (spectral and thermal) of analysis and DFT approach. As results, middle ordered melting type of series with exhibition of nematic mesophase were observed. The observed mesogenic properties and transition temperature are affected by the size of alkyl chains that shows mesomorphism is susceptible to molecular structure. The prepared LCs of cinnamoyl ester derivatives were further examined for their biological activities and the obtained results indicates a good biological potential for the studied LC materials.

Morphology and line tension of twist disclinations in a nematic liquid crystal.

We deploy optical microscopy with and without an applied magnetic field to characterize the three-dimensional morphology and measure the line tension of twist disclinations in twisted nematic liquid crystal (LC) sample cells. Twist disclinations are generated by quenching the LC, 5CB (4-cyano-4'-pentylbiphenyl), into the nematic phase; 5CB is confined between substrates with in-plane anchoring directions perpendicular to one another. The disclinations form loops separating domains of opposite twist handedness. Many segments of these loops are pinned to the substrates, and the ends of some pinned segments connect to free disclination segments that penetrate into the bulk nematic. We use confocal microscopy to measure the profiles of these free disclinations and test theoretical predictions about their shape, yielding a lower bound of ∼32 nm for the disclination core radius. We then use an applied magnetic field to deform the free disclinations into circular arcs whose curvature increases with magnetic field strength and depends on the field-induced energy difference between opposite twist domains. The line tension of the disclinations is derived from an energy-balance equation that relates disclination curvature to magnetic field. The measured line tension increases logarithmically with sample cell thickness; it ranges from 75 to 200 pN in samples with thickness spanning from 6 to 27 μm. In total, the investigation introduces new non-invasive methodologies for studies of defects in LCs, and it provides new information about the line tension and character of isolated twist disclinations, thereby testing theory and laying experimental foundation for the study of ensembles of disclinations.

Thermal and electric field effects on the nonlinear optical response of a cyanobiphenyl liquid crystal doped with carbon dots

The present study is devoted to the investigation of the nonlinear optical response of a cyanobiphenyl liquid crystal (8CB) doped with carbon dots derived from dansyl chloride (CD-DsCl). Using the time-resolved z-scan technique, it is investigated how the CD-DsCl addition affects the nonlinear refractive coefficient of planar liquid crystal samples. The temperature dependence of nonlinear optical responses of pristine and doped samples are analyzed close to smectic-A - nematic and nematic - isotropic phase transitions. Furthermore, the effects of an external electric field are analyzed. Our results show that doped 8CB samples may exhibit an enhanced nonlinear optical response, which depends on the strength of the external field.

Effect of doping of organo-soluble carbon dots on ionic relaxation and conductivity of planar anchored cyanobiphenyl based nematic liquid crystal

We demonstrate here the striking effect of organo-soluble carbon dots (CDs, diameter ∼7- 8 nm) on the tunability of ionic relaxation and conductivity of the host, planar anchored thermotropic nematic liquid crystal (5CB, 4-Cyano-4′-pentylbiphenyl). The optical texture, frequency, temperature, and concentration dependent dielectric studies of pristine 5CB and CDs-5CB composites have been performed using the polarising optical microscope and high-resolution dielectric spectroscopy, respectively. The doping of 0.5 wt% CDs into planar anchored 5CB is resulted into the vertical alignment confirmed through the cross-polarised optical microscope. The doping of CDs in 5CB liquid crystal is resulted into an unprecedented faster ionic relaxation with an abatement of the ionic amplitude at room temperature. The shift in the relaxation frequency for 0.5 wt% CDs-5CB composite (induced vertical alignment) as compared to pristine 5CB (planar aligned) at 28 °C (nematic) is found to be ∼13 folds which is further increased to ∼18 folds at 38 °C (isotropic). A similar trend in the conductivity curve is also observed which further confirms the significant enhancement in conductivity value with increase in temperature and concentration of dopant CDs. The observation of enhanced ionic conductivity and faster ionic relaxation in CDs-5CB composites as compared to pristine 5CB are attributed to the complete change of planar to vertical alignment by doping of CDs on planar anchored liquid crystal sample cells. It appears that the plausible strong interaction between hydrocarbon chains of CDs and 5CB molecules through anchored substrate surfaces with increasing concentration of CDs and decrease in rotational viscosity of host 5CB with increasing temperature certainly plays a pivotal role in the tuning of ionic relaxation and conductivity in the liquid crystal sample cells. We certainly believe that our results would catalyze the cognizance of the ionic relaxation and conductivity in CDs-5CB composites and other related systems. Moreover, such composites with tunable ionic relaxation/conductivity would be certainly helpful in the fabrication of various tuneable devices such as wave front corrector, low frequency oscillation generators, dynamic light scattering, and so on.

Effect of Azo Dye on Electro-Optic and Optical Band Gap Characteristics in ZnO Nanoparticles Induced Vertically Aligned Liquid Crystal Cells

Alignment of liquid crystal (LC) molecules in vertical direction is the most promising and interesting aspect for display devices in view of scientific and technological growth. Moreover, in accordance with the photovoltaic device applications, liquid crystals (LCs) show numerous applications. In the present work, the impact of dye as dopant with appropriate amount, over the electro-optic (E-O) and band gap properties as well as phase behaviour of vertically aligned liquid crystals (VALCs) has been studied and discussed. Initially, zinc oxide (ZnO) nanoparticles (NPs) were mixed to induce the vertical alignment (VA) in confined cell. Then, to prepare the dye doped LC sample, 0.125% of azo dye as dopant was uniformly mixed in the host sample. The results showed enhanced E-O characteristics with reduction in optical band gap as calculated using UV Visible study in 0.125% dye doped cell as compared to host sample cell.

Peculiarities of the effect of different types of SOR nanoimpurities on the value of ionic component of the electrical conductivity of the homeotropically aligned nematic liquid crystal 6 СВ

In this paper, the effects of SOR5, SOR10, and SOR15 nanoimpurities on the value of the ionic conductivity of the homeotropically aligned nematic liquid crystal 6CB are reported. Electrical measurements are carried out within a wide frequency range (from 6 Hz to 106 Hz) at room temperature (293 K). The largest changes in the electrical conductivity occur in the low-frequency range (less than 103 Hz) and depend on the type of nanoimpurity and on its concentration. Despite the similarity in the chemical composition of SOR5, SOR10, and SOR15, the measured dependences of the electrical conductivity of the studied samples on the concentration of nanoimpurities are substantially different. In the case of the SOR10 impurity, the ionic component of the electrical conductivity depends on the concentration of SOR10 according to a power law with an exponent approximately equal to 0.5, which is typical for the bimolecular recombination of charge carriers (i.e., the behavior of a weak electrolyte). Liquid crystal samples containing SOR5 and SOR15 nanoimpurities behave in a similar way in a low concentration region (between 0.01 and 0.05 mass %). Interestingly, further increase in the concentration of nanodopants (>0.05 mass %) results in a dramatically different behavior. The electrical conductivity of liquid crystals doped with SOR5 undergoes a sharp increase whereas the electrical conductivity of samples containing SOR15 decreases.

Neural networks determination of material elastic constants and structures in nematic complex fluids

Supervised machine learning and artificial neural network approaches can allow for the determination of selected material parameters or structures from a measurable signal without knowing the exact mathematical relationship between them. Here, we demonstrate that material nematic elastic constants and the initial structural material configuration can be found using sequential neural networks applied to the transmmited time-dependent light intensity through the nematic liquid crystal (NLC) sample under crossed polarizers. Specifically, we simulate multiple times the relaxation of the NLC from a random (qeunched) initial state to the equilibirum for random values of elastic constants and, simultaneously, the transmittance of the sample for monochromatic polarized light. The obtained time-dependent light transmittances and the corresponding elastic constants form a training data set on which the neural network is trained, which allows for the determination of the elastic constants, as well as the initial state of the director. Finally, we demonstrate that the neural network trained on numerically generated examples can also be used to determine elastic constants from experimentally measured data, finding good agreement between experiments and neural network predictions.

NMR Relaxation by Redfield equation in a spin system [formula omitted

The Redfield master equation was solved analytically for a nuclear system with spin I=7/2. Using the irreducible tensor operator basis, the solutions of each density matrix element were computed. The experimental setup consisted of the 133Cs nuclei of the cesium-pentadecafluorooctanoate molecule in a lyotropic liquid crystal sample in the nematic phase at room temperature. Experimental longitudinal and transverse magnetization dynamics of the 133Cs nuclei were monitored, and the theoretical approach was used to generate valuable mathematical expressions with the highest accuracy through numerical procedures. This methodology can be extended to other nuclei with minimal difficulties.

Enhancement in Photoluminescence of Nematic Liquid Crystals Doped with CsPbBr3 Quantum Dots

We report the enhancement in photoluminescence (PL) of nematic liquid crystals (NLCs) doped with CsPbBr3 (perovskite) quantum dots (QDs). QDs play a vital role to enhance the PL intensity, which has been attributed to the increase in the planar alignment of NLC molecules by reducing light leakage centres and intrinsic defects. QDs were synthesized by the hot injection chemical method. The structural properties of QDs were examined by X-ray Diffraction (XRD) and Transmission Electron Microscopic (TEM) measurements. Orthorhombic crystallite structure of CsPbBr3 QDs without secondary phase formation was confirmed from XRD pattern. The particle size of QDs was calculated by TEM and found to be 7.3 (± 1.1) nm. The optical properties of QDs were studied by recording UV-Visible absorption and PL spectra at room temperature. The absorption spectrum reveals the excitonic peak at 509 nm and PL emission is observed at 514 nm. The chemically prepared QDs were further used to enhance the emission of NLC. Firstly, liquid crystal sample cells were fabricated by conventional polyimide technique. NLC doped with CsPbBr3 QDs were inserted into the sample cell via the capillary action. The filled sample cells were characterized by polarising optical microscope (POM) images and PL spectra measurements. The dark and bright state images of POM demonstrate the uniform alignment and homogeneous texture of liquid crystal molecules in both cells. The molecular alignment is further improved while the light leakage centres and defects were reduced after doping QDs in the host NLC material. This leads to a significant enhancement in absorption and hence the emission of NLC. We found the enhancement in PL intensity by 11% compared to pure NLC. The improved emission of NLC is attributed to modified molecular alignment in presence of QDs. Results based on present work will help to fabricate QDs based display devices with improved the optical contrast and lower the operating voltage

Novel graphene oxide derivatives and its effect in broad-band reflectors

ABSTRACT n-Octylyamine (CA) was chemically grafted onto carboxylic groups of graphene oxide (GO) via amidation reaction. The resultant modified GO sheets (GO-CA) were easily redispersed in common organic solvents or liquid crystals (LCs), facilitating the structure characterisation and the device fabrication by solution processing. Broadband reflectors could be obtained by doping different contents of GO-CA nanosheets into chiral nematic liquid crystalline (N*-LCs) media to a photo-polymerisation. Experimental results showed that both the bandwidth of the reflection spectra and the location of the reflection band of the GO-CA-doped composite films were better than the N*-LCs sample without GO-CA. Effects of polymerisation temperatures and doped contents of GO-CA on the broadband reflection of N*-LC composite films were investigated.

Probing shapes of microbes using liquid crystal textures

We propose a novel technique to probe shape of a single microbe embedded in a nematic liquid crystal (NLC) sample by observing geometry of dark brushes with optical microscope using a cross-polarizer set up. Assuming certain anchoring conditions for the NLC director at the surface of the microbe, we determine the resulting shapes of brushes using numerical simulations. Our results suggest that for asymmetrical microbes (such as cylindrical shaped bacteria/viruses), resulting brushes may carry the imprints of this asymmetry (e.g. the aspect ratio of cylindrical shape) at relatively large distances to be able to be seen using simple optical microscopy even for microbe sizes in few tens to few hundred nanometer range.

Electric field induced buckling of inversion walls in lens-shape liquid crystal droplets

Lens-shaped liquid crystal samples have the potential for their use in tunable multifocal optical lenses. In previous observations (Phys. Rev. Research, 2, 023261 (2020) and J. Mol. Liq., 334, 116085 (2021)) plano-convex spherical lens-shaped liquid crystal sessile droplets were studied either in magnetic or AC electric fields, and the formation of an inversion wall (a one-dimensional soliton) moving toward the periphery was observed and explained.Here we present experimental observations of the structure of plano-convex lens-shaped nematic liquid crystal droplets subjected to simultaneous competing magnetic and electric fields. It is found that above a threshold electric field the initially straight defect wall buckles to form a zig-zag shape. This phenomenon is compared to those observed in sandwich cells with uniform thickness and the differences in their theoretical description are discussed.

Enhanced electro-optical nonlinear responses of doped nematic liquid crystals: Towards optoelectronic devices

Liquid crystals with high electro-optical responses play significant roles in optics and photonics. Providing a simple method for increasing the electro-optical behaviors of liquid crystals can be considered one of the most important and challenging research areas. In this work, left-handed chiral dopants and temperature effects on the electro-optical properties of pure and doped nematic liquid crystals with different percentages of chiral dopants were investigated. Despite decreasing the Kerr constant by increasing the percentage of chiral dopants, and temperature, the maximum values were observed for 4% of chiral dopants near the transition temperature. In this case, the value of Kerr constant is approximately 20 times that of a pure liquid crystal sample. This interesting result can be related to the changes in molecular polarizability due to molecular interactions. Hence, doped liquid crystals with high and controllable responses can be a good candidate for designing optoelectronic devices.

Application of TiO2 nanoparticle and polyimide blend alignment layer in liquid crystal lens

Suspension of colloidal nanoparticles (NPs) in liquid crystals (LCs) is a common technology to modify the electro-optical characteristics of a LC device. Unfortunately, NP aggregation spontaneously proceeds over time through the dipolar attractive interaction between NPs and results in the light scattering and distortion of the nematic order, which degrades the performance of the LC device. Here, rutile titanium dioxide (TiO2) NPs were suspended in the alignment layer rather than LCs to prevent the proceeding NP aggregation. During the deposition of the alignment layer, the NPs were hardened in the alignment layer with a hard bake process. The blend alignment layer was utilized to develop a hole-patterned liquid crystal (HLC) lens. This layer enhances the polar anchoring of LCs because of the intermolecular interaction between NP and LC and reduces the ion density and rotational viscosity of the LC mixture through harvested effect of free-ions. It also assists in spreading the fringing electric field toward lens center by TiO2 NP contribution. These results speed up the dynamic response of the HLC lens. The introduction of blend alignment layer decreases the focus and defocus times of the HLC lens by 15% and 34%, respectively. Moreover, the operation voltage of the HLC lens for achieving the shortest focal length is reduced by ∼40%. The decreased switching time is verified by calculating the transient phase conversions of HLC lenses with various viscosities. The calculated results correspond to the experimental results. The blend alignment layer did not degrade the lens and focusing qualities of the HLC lens. Long-term observation revealed that the NP aggregation state remained similar for the LC sample with NPs suspended in the alignment layer. By contrast, NP aggregation spontaneously proceeded and connected networks appeared with time for the LC sample with NPs suspended in LCs. The blend alignment layer can improve the operation voltage and dynamic response of a LC device and prevent device deterioration over time.