Salt Welds Research Articles

A primary evaporite weld revealed in the late Paleozoic Antigonish sub-basin of Nova Scotia

The Antigonish sub-basin lies within the late Paleozoic Maritimes Basin of Atlantic Canada. Late Devonian to early Carboniferous basin development resulted in a basin-and-range topography, within which the clastic Horton Group was deposited in grabens and half-grabens. The overlying Viséan Windsor Group contains substantial evaporite units; later basin development was accompanied by expulsion of these evaporites. In the Antigonish sub-basin, a significant stratigraphic omission surface initially described as a thrust was subsequently reinterpreted as the extensional Ainslie Detachment. This surface can be examined in drill-core, where the halite-bearing interval is reduced to 3.8 m of halite-cemented breccia of sedimentary rock fragments. The halite cement is sub-horizontally foliated and lineated. At Lakevale, an outcrop section of the Windsor Group is reduced in thickness to tens of metres. Above a basal limestone unit containing pseudomorphs of gypsum, most of the Windsor Group is represented by sedimentary-clast breccias that resemble those seen in core, but with the halite removed by solution in the near-surface environment. The stratigraphic record within the sub-basin implies that expulsion of lower Windsor salt was initially toward the edges of the basin where rising diapirs blocked the deposition of middle Windsor group, but in the basin centre a second salt unit was deposited. Subsequently, during contractional inversion of basin-bounding faults, the middle Windsor salt was expelled into diapirs near the centre of the basin. The Ainslie Detachment is reinterpreted as a primary salt weld: a boundary between units formerly above and below expelled lower Windsor evaporites. The resulting stratigraphic omissions and structures match those seen above expelled evaporite layers on continental margins.

Salt welding during canopy advance and shortening in the Green Canyon area, northern Gulf of Mexico

Salt welding during canopy advance and shortening in the Green Canyon area, northern Gulf of Mexico

Reconstructing the Iberian Salt‐Bearing Rifted Margin of the Southern Pyrenees: Insights From the Organyà Basin

AbstractReinterpretation of the Organyà Basin, based on new detailed field observations and subsurface data, emphasizes the key contribution of Upper Triassic evaporites in the tectono‐sedimentary evolution of the South‐Central Pyrenees. Results are integrated in a 65‐km long restored cross‐section through the Serres Marginals, Montsec and eastern Organyà salt‐related depocenters. The reconstructed part of the Jurassic–Cretaceous northern Iberian salt‐rich rifted margin shows a template characterized by inherited Permo‐Triassic basement normal faults and an initial salt thickness of 0.7 km to the south and 1.5 km to the north. The Organyà Basin is part of the South Pyrenean Diapiric Province, a large system of salt related depocenters and minibasins, that is limited to the north by the more than 120‐km long Senterada salt wall complex separating the supra‐salt and sub‐salt domains in the Southern Pyrenees. Three main stages of diapiric activity are recognized along the northern Iberian margin from Asturias to the Eastern Pyrenees: a Jurassic early salt mobilization; a latest Jurassic–middle Albian main diapiric evolution associated with rifting; and a Campanian–Miocene diapiric reactivation during basin inversion that produced salt welds and thrust welds and translated the salt province some 60 km to the south.

Stochastic velocity modeling for assessment of imaging uncertainty during seismic migration: Application to salt bodies

Variations in the migration velocity model directly affect the position of the imaged reflectors in the subsurface, leading to structural imaging uncertainties. These uncertainties are not explicitly addressed when trying to deterministically build an adequate velocity model. This paper presents a new stochastic geology-controlled velocity modeling method that handles the possible presence of a salt weld. This permits the generation of a large set of geologic scenarios and associated velocity models. Each model is used to remigrate the seismic data. Then, a statistical analysis of the resulting seismic images is performed to quantify the local variability of the seismic responses. The approach is applied to the imaging of salt diapirs in an iterative scheme (migrate, pick, and update). The results indicate that similar to stacking common-midpoint gathers, the statistical analysis preferentially preserves recurrent features from one image to another. In particular, this analysis permits the distinction between the connected and detached diapirs without prior knowledge about their connectivity, highlighting the potential of the method to resolve important aspects of the basin and reservoir architecture. More generally, it provides quantitative information on the parts of the seismic image most sensitive to migration velocity variations, which opens an interesting perspective to quantitative interpretation uncertainty assessment. Finally, the presented application also suggests that it is possible to significantly improve the quality of the generated seismic images by sampling many possible geologic scenarios.

The role of the underburden at Elgin Franklin in the understanding of the overburden 4D signal

Elgin, Franklin, and West Franklin are high-pressure high-temperature fields located in the Central North Sea. The fields share a similar reservoir and overburden geology. During the life of the fields, they have undergone a similar depletion over time. However, each field shows a different 4D behavior in the overburden. The 4D signal on Elgin is the strongest and is located away from the wells. The Franklin 4D signal is in line with expectation as the strongest signal close to the wells. On West Franklin, the 4D signal is small and barely distinguishable from noise. To explain the differences in 4D signal between the fields, a detailed underburden salt interpretation is performed. The differences in underburden between Elgin (thick with an abundance of salt) and West Franklin (marginal underburden with proximal salt) show a strong correlation with the 4D signals of the overburden. The renewed salt interpretation is used to update a vintage geomechanical model, from which strains and stresses are computed. During the stress initialization of the geomechanical model, the underlying salt (thick sheet or salt weld) creates stress perturbations on the salt/rock interface. When the reservoir compaction is simulated, the 3D model simulates the vertical stretches differently in the overburden for the fields. The stretching varies according to the underburden thickness and presence of salt below the underburden. The results of the geomechanical modeling help explain the differences observed in the overburden 4D signal of the fields.

Interpreting the nature of the Aulet and Adons diapirs from sedimentologic and stratigraphic analysis of flanking minibasin strata, Spanish Pyrenees, Catalunya, Spain

ABSTRACT The Aulet and Adons diapirs are exposures of Triassic Keuper evaporites in the Ribagorça Basin in the south-central Pyrenees. The diapirs have been alternatively interpreted from mapped structural relationships as either passive salt diapirs or extensional salt rollers. Correspondingly, the associated diapir-flanking minibasins have been interpreted as either salt-withdrawal or extensional-rollover minibasins, respectively. New field mapping, stratigraphic sections, petrographic analysis, correlation diagrams, and drone photography characterize the depositional facies and stratal architecture of the flanking Sopeira, Sant Gervàs, and Faiada minibasins (upper Albian to lower Santonian synrift to postrift strata), which in turn, constrains the origin and evolution of each salt body and associated minibasins. Each minibasin displays unique facies patterns and stratal thicknesses that reflect depositional systems evolving in response to spatially and temporally variable extension, salt evacuation, and passive diapirism during the Pyrenean rift and postrift phases. The Sopeira minibasin developed in the late Albian with significant localized subsidence, but it remains inconclusive if the bounding Aulet diapir originated as a passive diapir or a salt roller. The Llastarri fault zone, previously interpreted as a salt weld, separates the Sopeira minibasin from the primarily extensional Sant Gervàs minibasin, and is reinterpreted here as a remnant salt ridge, as it lacks evidence for passive diapirism. The Sant Gervàs minibasin remained relatively uplifted until the middle to late Cenomanian, along with the Faiada minibasin. Evidence for passive diapirism in the Faiada minibasin, including diapir-derived detritus and composite halokinetic sequences, indicate salt evacuation into the bounding Adons passive diapir. Integration of detailed sedimentologic and stratigraphic analyses with interpretations of basin formation and structural development provides better resolution of the earlier phases of gravity-driven extension and loading-driven salt movement of the Aulet and Adons diapirs; these insights help constrain structural interpretations and reconstructions of Pyrenean shortening and megaflap development in the Ribagorça Basin. Sedimentological and stratigraphic evidence for or against passive diapirism need to be integrated into structural interpretations, especially when precursor salt structures are obscured by subsequent contraction. This well constrained basin framework demonstrates the effects of inherited extensional structures and passive diapirism on Pyrenean shortening and megaflap rotation.

Secondary minibasins in orogens: Examples from the Sivas Basin (Turkey) and the sub-Alpine fold-and-thrust belt (France)

Inherited and syn-compressional salt-controlled structures in orogens are difficult to distinguish from compressional features because classical salt features (halokinetic growth strata, salt welds) can be misinterpreted as shortening-related structures (syn-kinematic growth strata, tectonic unconformities). In the Sivas basin in Turkey, syn-kinematic salt diapirism entirely shaped the architecture of the foreland and allowed the development of primary and secondary minibasins. One of the most impressive, the Tuzlagözü minibasin, formed by sinking into a salt feeder while being upturned due to compression. This minibasin has been nicknamed the “Turkish Vélodrome” because of its similarity with the well-known Vélodrome structure in the French Alps which shows growth strata and successive unconformities, commonly interpreted as foreland growth syncline features. Based on structural field descriptions and geometric analogies with the Tuzlagözü minibasin, we revisit the Vélodrome as a salt-related minibasin. We argue that the Vélodrome developed as a secondary minibasin above an Oligocene aerial salt glacier: sheet of Upper Triassic evaporites extruded during Alpine orogeny. This new interpretation enables to propose a revised evolution of the sub-Alpine fold-and-thrust belt. In line with other recent works, this study emphasises once again the important role of salt tectonics in the evolution of the sub-Alpine fold-and-thrust belt.

Salt control on the kinematic evolution of the Southern Basque-Cantabrian Basin and its underground storage systems (Northern Spain)

Underground gas storage is one of the solutions required for reducing CO2 emissions and ensure the transition to a renewable power supply. The Hontomín pilot-plant in N-Spain is a well-studied CO2 facility located in the Burgalesa Platform, a fold belt in the Southern Basque-Cantabrian Basin. Previous works agree that crustal extension and evaporite migration controlled the subsidence in the area. The discrepancies lie in the salt expulsion models proposed during syn-rift and post-rift stages and the basin deformation during Cenozoic contraction. The models range from thin-skinned tectonics, basement-involved thrusting, strike-slip faulting, and interference between thick- and thin-skinned thrusting with lateral extrusion. There is multiple working hypothesis often with contradictory predictions of the underground structure. Understanding these structural styles is critical for identify the main salt structures suitable for gas storage in the Burgalesa Platform. We integrate multidisciplinary data from 2D seismic to wellbore, gravity and field data, allowing us to construct three restored cross-sections that illustrate the process of progradational loading and salt expulsion towards the SW during the Early Cretaceous, which led to the development of the Hontomín and other trap structures within the salt overburden. Differential loading occurred diachronously along strike during the Cenozoic, younging to the SE by evacuation of the remaining salt, which caused diapirism and salt welding. We found that most of the structures in the cover were formed by salt migration, whereas Cenozoic shortening caused the rejuvenation of salt-structures and local diapir squeezing. Shortening in the basement is consumed in the frontal thrust that overrides the Duero foreland and in the partial reactivation of the former Mesozoic transfer faults as transpressional faults. The results of this work have implications for a further understanding of the tectonic evolution of the external area of rift structures, and as tectonic analogues in other salt-bearing basins.

Deformation of soft sediments and evaporites in a tectonically active basin: Bay St. George sub-basin, Newfoundland, Canada

The Bay St. George sub-basin of SW Newfoundland, part of the larger late Paleozoic Maritimes basin, formed under the influence of strike-slip faulting and the movement of evaporites. New stratigraphic correlations between Newfoundland and other late Paleozoic sub-basins illustrate the effects of both basement and salt movement. Coastal outcrops show complex combinations of synsedimentary, salt-related, and tectonic structures. Map relationships and dramatic thickness contrasts in the Tournaisian Anguille Group indicate that a large, concealed, NE–striking normal growth fault (Ship Cove fault) controlled sedimentation; the exposed Snakes Bight fault originated as a hanging-wall splay. Structures formed during, or soon after deposition include soft-sediment folds, boudins, clastic dykes, and millimetre-scale diapiric bulb structures, formed by overpressuring and liquidization of sediment. These suggest that the sub-basin was tectonically active throughout deposition. Evaporite-related deformation is recorded in the Visean Codroy Group and overlying strata. Comparisons between outcrop and subsurface suggests that significant amounts of evaporite were removed from exposed sections by halokinesis and solution. Complex outcrop relationships indicate salt welds, and suggest that units of the upper Codroy and overlying Barachois groups represent fills of minibasins that subsided into thick evaporites. Field relationships suggest tectonic inversion deposition related to E-W dextral strike slip motion that affected the entire Maritimes basin in the Serpukhovian, producing reverse-sense offsets and contractional folds. Many of the structures in the Bay St. George sub-basin, previously interpreted as post-depositional and purely tectonic, were formed by deformation of unlithified sediment and ductile evaporites during basin development.

Kinematic interaction between stratigraphically discrete salt layers; the structural evolution of the Corrib gas field, offshore NW Ireland

The kinematic interaction of thin salt layers during basin evolution has received little attention to date, despite there being several basins which contain multiple thin salt layers across NW Europe. This study utilises high-quality 3D seismic reflection data coupled with borehole data to investigate the evolution of the structure containing the Corrib gas field which is composed of two distinct salt structures. Located in the Slyne Basin offshore NW Ireland, the structure consists of a NE-SW oriented Permian salt anticline which folds the overlying Mesozoic stratigraphy. Upper Triassic salt acts as a second mechanical detachment and forms an elongate salt roller parallel to the crest of the Permian salt anticline. The Upper Triassic salt roller forms the footwall of a listric fault which downthrows the anticlinal crest of the folded Jurassic section to the SE. The Permian salt anticline began rising during the Late Triassic and Early Jurassic driven by low-strain regional extension. During the main phase of rifting, a combination of basement tilting, gravity gliding, and salt welding resulted in a steep increase in the amplitude of the Permian salt anticline. The relief on the salt-cored fold resulted in gravity gliding on the Triassic salt, forming the parallel salt roller and listric fault. The throw distribution on the listric fault is driven by the combined mechanisms of gravity sliding on the Triassic salt and by inflation of Triassic salt in the footwall of the fault. The listric fault is reactivated post-rift, suggesting modification of the Permian and Triassic salt structures. This study improves the understanding of the kinematic interaction of thin salt layers during syn-rift and post-rift deformation, with implications for hydrocarbon exploration on the Irish Atlantic margin and further afield.

Impacts of vertical salt welding on pore pressure, stresses, and deformation near the weld

We use a forward finite-element model to explore pore pressure, stresses, and deformation near a vertical weld. Dipping layers of mudrocks interbedded with a mixture of basin-center and basin-wide sand layers are deposited sequentially over a salt layer. After a salt wall rises at the downdip end of the model and emerges at the basin surface, shortening is imposed on the system until the salt wall almost welds where the wall feeder is narrowest (waist). Welding causes a significant increase in horizontal stress, which results in increased pore pressure near the weld. The pore-pressure increase adversely affects hydrocarbon accumulation and drilling near the weld because it: 1) causes remigration of pore water downdip along sand beds cresting near the weld, 2) decreases the hydrocarbon-column capacity of these beds, and 3) narrows the mud-weight window for drilling wellbores near the weld. The least principal stress near the weld is almost vertical and equal to the overburden stress in mudrocks, but horizontal and significantly lower in sand beds. Welding of the salt wall causes steepening of flanking strata and shortening of the weld wall rocks. The impacts of welding begin at a waist width of 1.35 km, long before the salt wall welds.

What controls salt‐detached contraction in the translational domain of the outer Kwanza Basin, offshore Angola?

AbstractIt is now well‐established that base‐salt relief drives complex deformation patterns in the mid‐slope domain of salt‐bearing passive margins, in a location classically thought to be dominated by simple horizontal translation. However, due to a lack of detailed studies drawing on high‐quality, 3D seismic reflection data, our understanding of how base‐salt relief controls four‐dimensional patterns of salt‐related deformation in natural systems remains poor. We here use 3D seismic reflection data from, and structural restorations of the Outer Kwanza Basin, offshore Angola to examine the controls on the evolution of variably oriented salt anticlines, rollers, and walls, and related normal and reverse faults. We show that the complex geometries and kinematics of predominantly contractional salt structures reflect up to 22 km of seaward flow of salt and its overburden across prominent base‐salt relief. More specifically, this contractional deformation occurs where the seaward flow of salt is inhibited due to: (a) it flowing being forced to flow up, landward‐dipping ramps; (b) it encountering thicker, slower‐moving salt near the base of seaward‐dipping ramps; or (c) the formation of primary salt welds at the upper hinge of seaward‐dipping ramps. The rate at which salt and its overburden translates seaward varies along strike due to corresponding variations in the magnitude of base‐salt relief and, at a larger, more regional scale, primary salt thickness. As a result of these along‐strike changes in translation rate, overburden rotation accompanies bulk contraction. Our study improves our understanding of salt‐related deformation on passive margins, highlighting the key role of base‐salt relief, and showing contraction, extension and rotation are fundamental processes controlling the structural style of the mid‐slope translational domains of salt basins.

Characterization and origin of large Campanian depressions within the Chalk Group of the Danish Central Graben – implications for hydrocarbon exploration and development

Abstract This study re-examines large and deep U-shaped reflections (2–4 km wide and 100–200 m deep) within the Upper Cretaceous–Danian Chalk Group in the inverted Roar Basin of the Danish North Sea, previously interpreted as a moat associated with a contour-parallel current system and/or erosive channels formed by gravity-driven turbidites. Improved 3D seismic data quality and seismic interpretation techniques helped to identify overlooked reflection terminations, which suggest that rather than a linear depression, the U-shaped reflections outline several bowl-shaped depressions. In addition, vertical high-amplitude columns and vertical discontinuity zones within and below the depressions were recognized and interpreted to indicate the presence of small fluid pipes, suggesting that the formation of the depressions is more complex. Carbon isotope analysis of high acoustic impedance beds within the underlying Lower Cretaceous chalk showed negative δ 13 C values down to −20‰, and are interpreted to indicate sediments influenced by methane-derived authigenic carbonates. Permo-Triassic half-grabens seem to have been a major source of gas-bearing fluids, as evidenced by hydrocarbon leakage phenomena within Triassic–Lower Cretaceous strata. In areas where Zechstein salt is present, the leakage root lies at salt welds, causing the formation of focused seismic reflection wipe-out and dim zones. In areas where salt was absent, the leakage root comprises a much more diffuse zone across the fault boundaries of the Permo-Triassic half-graben, and gas chimneys are characterized seismically as broad vertical dim zones up to 10 km wide. Campanian inversion tectonics caused fault reactivation and several hundreds of metres of uplift in the Roar Basin, which created an instability for the trapped gas-bearing fluids. Gentle fluid venting through observed pipes caused sediment suspension and entrainment, which could be carried away by bottom-current activity, causing localized zones of non-deposition and the formation of individual depressions. This model thus does not disregard the role of bottom-current activity in the formation of the depressions, yet it includes a fluid-venting element that fits better with the architecture and overall evidence for fluid-venting features in pre-chalk strata, as well as in the Chalk Group. Importantly, it shows that prior to the thermogenic maturation of the main source rock (i.e. the Bo Member of the Farsund Formation in the Late Miocene), fluid venting had already occurred on the Late Cretaceous seafloor from deeper source rocks that are at present overmature.

3D mapping of intruding salt bodies in the subsurface of the Gulf of Mexico using 3D seismic data

Salt tectonics has important implications for hydrocarbon exploration in salt-bearing basins since salt deformation can directly or indirectly form hydrocarbon traps, influence hydrocarbon migration, and can control deepwater depositional systems. In various basins around the globe, extensive research has been conducted on initiation of salt mobilization, subsequent deformation, and eventual cessation, typically from subsurface two-dimensional (2D) sections. However, 3D seismic data has dominated the petroleum industry for the last 30 years. Despite the plethora of 3D seismic data acquired in salt-bearing basins, there has been hardly any published work displaying the 3D geometries of complex salt bodies. 3D salt mapping in the subsurface can reveal true distribution of salt bodies and their detailed intricacies of geometrical variations, aiding in the overall salt system interpretation. Using a large 3D seismic survey (3,350 km2), this study presents the first 3D salt mapping in the Gulf of Mexico, demonstrating how 3D visualization of the entire Louann Salt system within the Middle Jurassic to present-day stratigraphy can improve interpretation of salt feeder geometries, allochthonous salt canopies, initial salt distribution, and salt weld locations in the study area.

Diapir kinematics in a multi-layer salt system from the eastern Persian Gulf

The eastern Persian Gulf hosts several salt structures sourced from two different evaporite layers, the Neoproterozoic-Cambrian Hormuz Salt and the Oligocene-Miocene Fars Salt. Based on seismic interpretation, we discuss the kinematics and dynamics of this autochthonous multi-layer salt system for three case studies: the Tunb and Hengam diapirs, and the Taftan salt anticline. Halokinetic sequences related to Hormuz salt evacuation suggest three main stages of evolution: i) onset of Hormuz Salt diapirism (Paleozoic), ii) diapir squeezing, and emplacement of allochthonous Hormuz Salt (Late Cretaceous to Oligocene-Miocene), and iii) development of secondary and tertiary salt welds (Upper Miocene). Since Fars Salt structures are absent in areas devoid of allochthonous Hormuz Salt, our structural model interprets that the driving mechanism for Fars Salt diapirism is directly related to the emplacement of allochthonous Hormuz Salt during the Zagros-Oman contractional event. The related halokinetic sequences suggest that the Fars Salt diapir kinematic style depends on to the timing of Hormuz Salt extrusion with regards to Fars Salt deposition. Our results provide new insight into the interaction between salt structures sourced from two distinct autochthonous salt layers.

Impact of tectonic rafts’ gravitational instability on fault reactivation and geometry

The downslope gravitational instability of tectonic rafts can deform large volumes of supra-salt strata on continental margins. Detailed mapping of fault throw and geometry using three-dimensional (3D) seismic reflection data from the salt-rich Espírito Santo Basin (SE Brazil) shows that the complex fault geometries observed are primarily due to downslope gravitational instability of tectonic rafts. Three main tiers of faults were identified and their geometry analysed in detail. Tier 1 faults are associated with the initial stage of fragmentation of supra-salt strata into individual blocks, or rafts, which are separated by listric (roller) faults and associated minibasins. These faults comprise closely spaced normal faults that resulted from outer-arc stretching of strata overlaying discrete tectonic rafts. The faults accommodate a significant part of the bending strain occurring in the hanging-wall blocks of roller faults, thus forming a curved-polygonal planform geometry adjacently to large roller faults. Tier 2 faults are associated with a renewed stage of downslope gravitational gliding of tectonic rafts. The progressive bending of overburden strata during this stage led to the progressive faulting of overburden strata by these faults. The faults comprise closely spaced normal faults with a restricted range in fault strikes, forming a rectangular-polygonal planform geometry over rollover anticlines. Tier 3 faults are associated with a later stage of diachronous grounding of tectonic rafts. Differences in the degree of diachronous grounding of tectonic rafts are responsible for the development of these faults and subsequent shortening of the overburden strata. These faults comprise densely spaced set of normal faults with diverse range of fault strikes, forming an irregular-polygonal planform geometry over rollover anticlines. The interpreted fault tiers show fault throw maxima ranging from 50 m to 60 m, spacings of 180–420 m and trace lengths of 120–650 m. The interpreted fault tiers were reactivated and their growth is characterized by fault segment linkage. The diachronous downslope translation and grounding (welding) of tectonic rafts on sub-salt strata was an important process controlling the degree of deformation off Espírito Santo. Successive episodes of fault reactivation, and the subsequent generation of salt welds below tectonic rafts, potentially formed large conduits favouring fluid migration and the generation of hydrocarbon traps in supra-salt strata.

Minibasin depocentre migration during diachronous salt welding, offshore Angola

AbstractSalt tectonics is an important part of the geological evolution of many continental margins, yet the four‐dimensional evolution of the minibasins, the fundamental building block of these and many other salt basins, remains poorly understood. Using high‐quality 3D seismic data from the Lower Congo Basin, offshore Angola we document the long‐term (>70 Myr) dynamics of minibasin subsidence. We show that, during the Albian, a broadly tabular layer of carbonate was deposited prior to substantial salt flow, diapirism, and minibasin formation. We identify four subsequent stages of salt‐tectonics and related minibasin evolution: (i) thin‐skinned extension (Cenomanian to Coniacian) driven by basinward tilting of the salt layer, resulting in the formation of low‐displacement normal faults and related salt rollers. During this stage, local salt welding led to the along‐strike migration of fault‐bound depocentres; (ii) salt welding below the eastern part of the minibasin (Santonian to Paleocene), causing a westward shift in depocentre location; (iii) welding below the minibasin centre (Eocene to Oligocene), resulting in the formation of a turtle and an abrupt shift of depocentres towards the flanks of the bounding salt walls; and (iv) an eastward shift in depocentre location due to regional tilting, contraction, and diapir squeezing (Miocene to Holocene). Our study shows that salt welding and subsequent contraction are key controls on minibasin geometry, subsidence and stratigraphic patterns. In particular, we show how salt welding is a protracted process, spanning > 70 Myr of the salt‐tectonic history of this, and likely other salt‐rich basins. The progressive migration of minibasin depocentres, and the associated stratigraphic architecture, record weld dynamics. Our study has implications for the tectono‐stratigraphic evolution of minibasins.

The stratigraphic record of minibasin subsidence, Precaspian Basin, Kazakhstan

AbstractMinibasins are fundamental components of many salt‐bearing sedimentary basins, where they may host large volumes of hydrocarbons. Although we understand the basic mechanics governing their subsidence, we know surprisingly little of how minibasins subside in three‐dimensions over geological timescales, or what controls such variability. Such knowledge would improve our ability to constrain initial salt volumes in sedimentary basins, the timing of salt welding and the distribution and likely charging histories of suprasalt hydrocarbon reservoirs. We use 3D seismic reflection data from the Precaspian Basin, onshore Kazakhstan to reveal the subsidence histories of 16, Upper Permian‐to‐Triassic, suprasalt minibasins. These minibasins subsided into a Lower‐to‐Middle Permian salt layer that contained numerous relatively strong, clastic‐dominated minibasins encased during an earlier, latest Permian phase of diapirism; because of this, the salt varied in thickness. Suprasalt minibasins contain a stratigraphic record of symmetric (bowl‐shaped units) and then asymmetric (wedge‐shaped units) subsidence, with this change in style seemingly occurring at different times in different minibasins, and most likely prior to welding. We complement our observations from natural minibasins in the Precaspian Basin with results arising from new physical sandbox models; this allows us to explore the potential controls on minibasin subsidence patterns, before assessing which of these might be applicable to our natural example. We conclude that due to uncertainties in the original spatial relationships between encased and suprasalt minibasins, and the timing of changes in style of subsidence between individual minibasins, it is unclear why such complex temporal and spatial variations in subsidence occur in the Precaspian Basin. Regardless of what controls the observed variability, we argue that vertical changes in minibasin stratigraphic architecture may not record the initial (depositional) thickness of underlying salt or the timing of salt welding; this latter point is critical when attempting to constrain the timing of potential hydraulic communication between sub‐salt source rocks and suprasalt reservoirs. Furthermore, temporal changes in minibasin subsidence style will likely control suprasalt reservoir distribution and trapping style.

Structural evolution and deformation near a tertiary salt weld, Willouran Ranges, south Australia

Abstract We combine insights from subsurface studies and published numerical models to propose a three-phase conceptual model that considers the potential deformation patterns that form during the emplacement, evacuation and welding, and post-welding phases of tertiary weld formation. The proposed model aims to: 1) help establish the timing of deformation adjacent to a tertiary weld based on the geometry of deformation patterns, and 2) serve as a guide for future work that examines deformation adjacent to tertiary welds and beneath allochthonous salt. We apply the model, along with new, 1:10,000 scale geological mapping and mesostructural analysis of deformation patterns along the Kingston tertiary salt weld and contiguous Witchelina-Breaden Hill salt canopy in the Willouran Ranges of South Australia to constrain the evolution of the allochthonous salt system and the style, extent, and timing of adjacent deformation. Deformation near the weld is dominated by opening mode fractures that exhibit spatial heterogeneity in their orientation both along the strike of allochthonous salt and in suprasalt versus subsalt strata. A halokinetic drape fold, decimeter to decameter scale folding, and localized debris flow deposits are present in subsalt strata, whereas no evidence of thrust imbricates, or laterally continuous shear and/or rubble zones was observed anywhere below the canopy-weld complex. We hypothesize that remnant evaporite distribution and the juxtaposition of units exert the primary, largest-scale control on the hydrological behavior of tertiary welds. The influence of deformation occurs at a much smaller scale and is more heterogeneous and difficult to predict. Higher resolution models and additional field studies are required to identify and rank the many variables that control this deformation.

Structural styles in fold-and-thrust belts involving early salt structures: The Northern Calcareous Alps (Austria)

Shortened salt-withdrawal minibasins and associated salt welds are exposed in the Mesozoic strata of the Northern Calcareous Alps fold-and-thrust belt (Austria). Geological mapping and sequential restoration of a balanced cross section have indicated that these salt and salt-related structures developed during the postrift stage of the Neo-Tethys continental margin by evacuation and inflation/deflation of uppermost Permian to lowermost Triassic salt. Middle to Late Triassic minibasins were formed by down-building and downslope translation, flanked by megaflaps and salt walls. Salt and salt structures were rejuvenated by salt-wall fall and formation of bowl minibasins as a response to Penninic rifting since Rhaetian times. Complex structural styles, including younger-on-older contacts, tight folds, and kilometer-scale fully overturned panels resulted from the shortening of early salt structures upon the onset of Jurassic regional convergence. Salt tectonics can reconcile the stratigraphic development and internal structure of the long-debated Northern Calcareous Alps. Our work also provides a new line of research for understanding other fold-and-thrust belts developed from the Neo-Tethys continental margin (i.e., the Carpathian Mountains, the Southern Alps in Europe, the Dinaric Alps) and sets guidelines for other salt-influenced fold belts.