Changes In Salt Concentration Research Articles

An extended bio-electrochemical model for wastewater treatment and water desalination: Insights into the performance of microbial desalination cells

This paper presents an extended mathematical model for a microbial desalination cell (MDC), integrating Haldane kinetics for substrate inhibition and proton translocation theory for substrate dissociation under dynamic flow. The model is capable of predicting exoelectrogenic and methanogenic biomass dynamics, acetate removal efficiencies, salt concentration changes, and current production. Notably, it can be used to explore the influence of operational parameters such as dilution rates, temperatures, and external resistances. Our simulations reveal the optimal conditions for maximizing exoelectrogen concentration (500 mg/L) with minimal methanogen presence (50 mg/L) in the anode chamber at an anolyte dilution rate of 0.5 d−1, a temperature of 20 °C, and an influent acetate concentration of 1500 mg/L. The model accurately predicts the salt reduction in the middle chamber (from 0.2 to 0.09 mol/L) with a salt dilution rate of 0.5 d−1 and an external resistance of 20 Ohm. The model predicts a peak power output of 2.5 mW at external resistances between 20 and 50 Ohm. The model was validated against a suite of experimental literature data, including our previously published lab-scale studies, verifying its accuracy in predicting organic and salt removal rates, current production, and desalination efficiency. This extended model is a valuable tool for understanding the complex interactions between factors that influence MDC performance and can guide the optimization of MDC design for wastewater treatment and desalination.

Stimuli-Responsive Polymers for Engineered Emulsions.

Emulsions are complex. Dispersing two immiscible phases, thus expanding an interface, requires effort to achieve and the resultant dispersion is thermodynamically unstable, driving the system toward coalescence. Furthermore, physical instabilities, including creaming, arise due to presence of dispersed droplets of different densities to a continuous phase. Emulsions allow the formulation of oils, can act as vehicles to solubilize both hydrophilic and lipophilic molecules, and can be tailored to desirable rheological profiles, including "gel-like" behavior and shear thinning. The usefulness of emulsions can be further expanded by imparting stimuli-responsive or "smart" behaviors by inclusion of a stimuli-responsive emulsifier, polymer or surfactant. This enables manipulation like gelation, breaking, or aggregation, by external triggers such as pH, temperature, or salt concentration changes. This platform generates functional materials for pharmaceuticals, cosmetics, oil recovery, and colloid engineering, combining both smart behaviors and intrinsic benefit of emulsions. However, with increased functionality comes greater complexity. This review focuses on the use of stimuli-responsive polymers for the generation of smart emulsions, motivated by the great adaptability of polymers for this application and their efficacy as steric stabilizers. Stimuli-responsive emulsions are described according to the trigger used to provide the reader with an overview of progress in this field.

Novel PANI:Borophene/Si Schottky device for the sensitive detection of illumination and NaCl salt solutions

Metal/semiconductor structures, particularly Schottky diodes, play a crucial role in semiconductor identification and the production of electronic devices, like solar cells, photodetectors, photodiodes, and field-effect transistors (FETs). These structures are of great interest due to their ability to modify electrical and optical properties, responding to external factors such as illumination and temperature. However, despite extensive research in this field, there has been limited exploration of silicon-based metal/semiconductor structures incorporating PANI:Borophene interfacial materials. In this study, we prepared PANI:Borophene/p-Si and PANI:Borophene/n-Si structures and examined their photodiode properties using various measurements. The unoccupied trap levels (m) obtained 0.44 and 0.33 for Al/PANI:Borophene/p-Si and Au/PANI:Borophene/n-Si device, respectively. Our investigation revealed that both structures exhibited rectification behavior, with linear characteristics in the forward bias region, and deviations attributed to series resistance effects at higher voltages. Moreover, the presence of borophene in the interfacial layer led to improvements in the devices’ electrical properties. Finally, the PANI:Borophene/Si Schottky diodes was tested for salt detection and the Al/PANI:Borophene/p-Si diode has the characteristics of salt (NaCl) concentration detection sensor and it successfully detected salt concentration changes with respect to current flow.

Chloride hydrogeochemistry of the finger lakes in Central and Western New York, USA

Road deicing salts have impacted the hydrogeochemistry of lakes throughout the snow-belt region of the globe. This paper advances our understanding of the historical change in salt concentrations in, and sources to, the Finger Lakes of western and central New York state, and compares the results to other lakes across the globe. Surface water samples from Honeoye, Canandaigua, Keuka, Seneca, Cayuga, Owasco, Skaneateles and Otisco lakes were analyzed for chloride (Cl) concentrations, and augmented with published and unpublished decade, and for the first time, century-scale Cl data for these lakes and Hemlock Lake. A mass-balance model estimated the Cl flux required to match the measured Cl concentrations in each lake. Cl concentration and flux trends defined two groups of lakes. Group 1: A mid-1900′s peak in Cl concentrations was detected in Seneca and Cayuga lakes, that resulted from a short but significant spike of Cl, most likely from salt mine wastes during pre-Environmental Protection Agency times. Group 2: Hemlock, Honeoye, Canandaigua, Keuka, Owasco, Skaneateles and Otisco lakes, revealed smaller yet increasing concentrations and fluxes over time that were interpreted to reflect increasing use of road deicing salts in their watersheds and supported by correlations to their state and federal road lengths, percentage of impervious surfaces, water residence times in each watershed and the production of road salt in the US, but not to their trophic status, nor their percentage of agricultural land. Estimated Cl inputs from municipal wastewater treatment facilities, individual septic systems and the atmosphere (precipitation) were also insignificant in the Finger Lakes region. These results help clarify the processes responsible for increasing Chloride concentrations in lakes globally.

Towards spatiotemporal-resolved spectroscopic measurement of freezing desalination using femtosecond laser filaments

Freezing desalination can produce freshwater from seawater or industrial wastewater by ice crystallization with low energy consumption and less corrosion, and is promising for alleviating current stress on the world's water supply. However, the salt rejection dynamics during the freezing process is less understood due to the lack of real-time, high spatiotemporal-resolved detection methods. Here we present a proof-of-principle, quantitative, and simultaneous multi-salt detection approach for the measurement of salt rejection dynamics in salt-contaminated water at the ppm level using an ultrashort-pulsed femtosecond laser propagating in the filamentation regime. We show that this approach of filament-induced plasma spectroscopy possesses the abilities for both monitoring the change of salt concentration in the remaining unfrozen water during the freezing process and imaging the spatial concentration distributions of metal contaminants on the resultant ice surface. With this approach, we find that the initial salt concentration in water plays an essential role in the efficiency of the freezing desalination process, which shows a metal-species-dependent characteristic. Our results pave the way towards real-time, online, and high spatiotemporal-resolved detection of salt rejection dynamics of freezing desalination by ultrashort-pulsed lasers.

Plant-on-a-chip: continuous, soilless electrochemical monitoring of salt uptake and tolerance among different genotypes of tomato.

Tomatoes (Solanum lycopersicum), a high-value crop, exhibit a unique relationship with salt, where increased levels of NaCl can enhance flavor, aroma and nutritional quality but can cause oxidative damage and reduce yields. A drive for larger, better-looking tomatoes has reduced the importance of salt sensitivity, a concern considering that the sodium content of agricultural land is increasing over time. Currently, there are no simple ways of comparing salt tolerance between plants, where a holistic approach looking at [Na+] throughout the plant typically involves destructive, single time point measurements or expensive imaging techniques. Finding methods that collect rapid information in real time could improve the understanding of salt resistance in the field. Here we investigate the uptake of NaCl by tomatoes using TETRIS (Time-resolved Electrochemical Technology for plant Root environment In situ chemical Sensing), a platform used to measure chemical signals in the root area of living plants. Low-cost, screen-printed electrochemical sensors were used to measure changes in salt concentration via electrical impedance measurements, facilitating the monitoring of the uptake of ions by roots. We not only demonstrated differences in the rate of uptake of NaCl between tomato seedlings under different growth conditions, but also showed differences in uptake between varieties of tomato with different NaCl sensitivities and the relatively salt-resistant "wild tomato" (Solanum pimpinellifolium) sister species. Our results suggest that TETRIS could be used to ascertain physiological traits of salt resistance found in adult plants but at the seedling stage of growth. This extrapolation, and the possibility to multiplex and change sensor configuration, could enable high-throughput screening of many hundreds or thousands of mutants or varieties.

Electrochemical Characterization of Salt-in-Water and Water-in-Salt Zinc Sulfate and Zinc Acetate Electrolytes

The electrochemical properties of Zn(OAc)2 or ZnSO4 with water at different concentrations are investigated. The electrochemical stability window follows Pt < Au < glassy carbon electrodes, and expands with increasing concentration of electrolytes. The change in salt concentration does not significantly change the double layer capacitance, and the potential of zero charge of Pt, Au and glassy carbon electrodes are estimated to be 0.25–0.35 VSCE, 0.05 VSCE, and –0.20 VSCE, respectively. With hydroquinone as the redox probe, the redox electrochemistry, ion transport and electron transport kinetics in these electrolytes are studied. The apparent redox potential of hydroquinone increases with the electrolyte concentration, and the diffusion coefficients of hydroquinone in Zn(OAc)2 and ZnSO4 electrolytes decrease with the increase of electrolyte concentration. The electron transfer rate constants (k) between the electrode and hydroquinone in Zn(OAc)2 and ZnSO4 electrolytes range in 1.28–1.46 cm s−1 and 0.29–0.81 cm s−1, respectively. The lower k in ZnSO4 electrolytes is related to the lower solvent reorganization energy, the interaction of electroactive ions with water, and the interaction of electrolyte cations.

Parameter control, characterization and stability of soy protein emulsion prepared by microfluidic technology.

A flow-focusing microfluidic device driven by pressure was employed in soy protein emulsions with uniform droplet size and good morphology. The results suggested that pressure was an essential factor for droplet formation. The optimum parameter was at a continuous phase pressure of 140mbar and dispersed phase pressure of 80mbar. Under this condition, the droplet formation time was shortened to 0.20s, with average sizes of 39-43μm and coefficient of variation of about 2%. Emulsion stability was improved with increasing soy protein isolate (SPI) concentrations. At SPI concentrations higher than 20mg/mL, the emulsions exhibited improved stability against changes in temperature, pH and salt concentration. Emulsions prepared in this manner exhibited superior oxidative stability than those prepared by conventional methods utilizing homogenizers. This study showed that microfluidic technology can be applied to soy protein emulsions as an effective tool for preparing droplets with uniform size and enhanced stability.

Rationally designed chitosan-interpenetrated cryobeads functionalized with polyacrylamide chains: Comparative analysis by Hertzian model and rubber elasticity

Optimization of the synthesis of polymer microspheres and millimeter-sized gel beads has gained importance due to efficiency and design advantages in applications. A systematic study is presented to allow for a molecular-based understanding of elasticity of crosslinked-chitosan (CS) beads. Unique results were obtained examining the effect of polymerization temperature and gel-preparation form on physico-mechanical properties of CS-incorporated poly (N-isopropylacrylamide‑sodium acrylate)/polyacrylamide, PNIPA/PAAm-CS, beads. ATR-FTIR, and thermogravimetric analysis results confirmed the successful preparation and enhanced thermal stability of CS-based gel beads in the form of semi-IPN. The structural changes of semi-IPN gels were studied based on powder X-ray diffraction analysis. After being incorporated with CS, the cryopolymerization was carried out under cryo-conditions, and PNIPA/PAAm structure became much more resistant to mechanical load. Addition of CS to semi-IPN structure caused a 2-fold increase in compressive elastic modulus, while the gel preparation under cryoconditions also improved the mechanical properties considerably by lowering the polymerization temperature. The scaling parameter calculations estimated by Hertz model for PNIPA/PAAm-CS semi-IPN cryobeads are related to displacement of compression force with an exponent of 1.63 ± 0.19. As cryobead diameter increased, swelling degree tendency increased, while a decrease in modulus was observed with increasing swelling. The presence of CS in semi-IPNs improved pH-response in an acidic environment, but stiffness of CS reduced the shrinkage ability of cryobeads upon increasing swelling temperature. Based on the interaction between semi-IPN structure and salt solutions, an improvement in elastic modulus was observed in various ammonium salts and sodium tripolyphosphate solution. On-off switching of cryobeads was a reversible process that was consistent with changes in ammonium salt concentration. Qualitative comparisons with experimental results showed that the prepared cryobeads can be designed as drug release carriers by ionic strength-switching modulation.

Polyampholyte Polymers‐Based Sensors: A Review on Stimuli and Applications

AbstractPolyampholytes are a specific type of zwitterionic materials composed of monomers with both positive and negative charges. These materials can be synthesized through various methods, such as free radical, anionic, or cationic polymerization, or by modifying existing polymers through postpolymerization processes. Polyampholytes possess unique properties that make them attractive for a wide range of applications, particularly in sensor technology. They can undergo conformational changes in response to external stimuli like pH variations, temperature fluctuations, or changes in salt concentration. These properties have led to their application in biosensors, salt and ion sensors, pH sensors, fluorescence‐based sensors, strain sensors, and thermosensitive sensors. It is worth noting that in some cases polyampholytes can respond to multiple stimuli simultaneously. Overall, polyampholytes are drawing great attention for their excellent mechanical properties including self‐healing, high toughness, and fatigue resistance. Thus, this review is focused on advances that are made to develop polyampholyte polymer‐based sensors in different applications.

Polar and dispersive surface tension components of water-guanidinium chloride (Gdmcl) binary mixtures

Interfacial interaction of water with guanidinium chloride (GdmCl) is crucial to understanding protein solubility and denaturing mechanism. However, molecularly resolved parameters such as polar and dispersive surface energy components of water-GdmCl mixtures remain unknown. Here, we developed a method to determine water-GdmCl mixture surface tension and its components using four different substrates including polydimethylsiloxane (PDMS), silicone, polyethylene, and polystyrene. Results show all six combinations, PDMS-silicone, PDMS-polystyrene, PDMS-polyethylene, silicone-polyethylene, silicone-polystyrene, and polyethylene-polystyrene can estimate similar trend of total surface tension, polar and dispersive components with respect to salt concentration changes. Silicone-polyethylene pairs yield the most accurate surface tension compared to others because silicone and polyethylene have large distinctive surface energy differences. Results show that polar components increase from 51 mJ/m2 to 64 mJ/m2 when salt concentration increases; dispersive components decrease from 21 mJ/m2 to 15 mJ/m2 when salt concentration increases. Total surface tension increases from 72.8 mJ/m2 to 78.1 mJ/m2 when GdmCl increases from 0% to 40 wt%. The results of this study can elucidate molecular interaction between water and GdmCl.

Lab in tube: comparing different morphological dependent gold nanomaterials towards naked eye and optical sensing of dopamine using aptamer

ABSTRACT Dopamine is a major catecholamine neuro-transmitter that plays important function in the human central nervous system’s function. Dopamine release disorders are linked to neurological illnesses and depression. To comprehend dopamine’s physiological roles, it is vital to monitor dopamine levels at early stage or in regular basis. Many diagnostic procedures are accessible, but they have limitations, thus low-cost and simple ways to test dopamine were needed like colorimetric biosensors. Such biosensors were built with nanoparticles (gold) as a label to help identify targets and the results may be viewed with the naked eye. These gold nanomaterials are available in a range of morphologies, including nanoparticles, nanorods, and others. The present method reported the use of gold nanoparticles (GNPs) and gold nanorods (GNRs) for effective aptamer-based sensing of dopamine. Herein a comparison study was conducted between GNPs and GNRs based apta-sensing of dopamine. Both AuNPs (gold nanoparticles) and AuNRs (gold nanorods) were characterised by SEM (Scanning electron microscope), XRD (X-Ray diffraction) and UV-Vis spectrophotometer (Ultraviolet-Visible spectroscopy). The result claimed that GNRs are more sensitive as they were detecting low concentration of dopamine which was confirmed via UV analysis. Various other parameters such as change in salt concentration, incubation time and interferents were also studied which proved that utilising aptamer and gold-nanorods can be a promising material in the neurotransmitter based diagnosis.

Conformational Analysis of Charged Homo-Polypeptides.

Many proteins have intrinsically disordered regions (IDRs), which are often characterized by a high fraction of charged residues with polyampholytic (i.e., mixed charge) or polyelectrolytic (i.e., uniform charge) characteristics. Polyelectrolytic IDRs include consecutive positively charged Lys or Arg residues (K/R repeats) or consecutive negatively charged Asp or Glu residues (D/E repeats). In previous research, D/E repeats were found to be about five times longer than K/R repeats and to be much more common in eukaryotes. Within these repeats, a preference is often observed for E over D and for K over R. To understand the greater prevalence of D/E over K/R repeats and the higher abundance of E and K, we simulated the conformational ensemble of charged homo-polypeptides (polyK, polyR, polyD, and polyE) using molecular dynamics simulations. The conformational preferences and dynamics of these polyelectrolytic polypeptides change with changes in salt concentration. In particular, polyD and polyE are more sensitive to salt than polyK and polyR, as polyD and polyE tend to adsorb more divalent cations, which leads to their having more compact conformations. We conclude with a discussion of biophysical explanations for the relative abundance of charged amino acids and particularly for the greater abundance of D/E repeats over K/R repeats.

Influence of Charge Regulation on the Performance of Shock Electrodialysis.

In order to understand the ion transport in a continuous cross-flow shock electrodialysis process better, numerous theoretical studies have been carried out. One major assumption involved in these models has been that of a constant surface charge. In this work, we considered the influence of charge regulation, caused by changes in salt concentration, on the performance of a shock electrodialysis cell. Our results show that, by including charge regulation, much higher potentials need to be applied to reach the same degree of desalination, compared to the constant surface charge model. Furthermore, we found that operating at higher potentials could lead to substantial Joule heating and therefore temperature increases. Although somewhat lower potentials were required in the nonisothermal case versus the isothermal case with charge regulation, the required energy input for desalination is still much higher than the thermodynamic minimum. This works highlights the important role charge regulation can play in a shock electrodialysis process.

Mathematical modeling of salt concentration change process in two-layer aqueous media

A mathematical model was developed to monitor and predict changes in salt concentration in groundwater in a two-layer environment, representing the process of salinization and swamping. A qualitative analysis of scientific research on the problem is provided. Since the process is represented by a differential equation, effective numerical computational algorithms were developed to solve the problem of salt concentration change in groundwater based on a stable disclosure scheme with high-order accuracy relative to time and spatial variables. Mathematical models of salt transport during geo-filtration processes were improved, and computational algorithms were developed, taking into account such important parameters as the physical and mechanical properties: water loss coefficient, diffusion coefficients, and filtration rates depending on the water level. The results obtained based on these developed numerical algorithms were analyzed. Before introducing new technologies, recommendations were developed to predict changes in salt content in water using an effective numerical algorithm. Based on the laws of motion of wastewater flows, it was noted that it is possible to conduct experiments using algorithms to determine the changes in distance and velocity of wastewater propagation with water-soluble chemicals and active properties in soil layers.

The relationship between bacterial outer membrane vesicles and halophilic adaptation.

Many cells are known to actively release nano-sized outer membrane vesicles (OMVs) that contain bioactive proteins, lipids, and nucleic acids into the extracellular environment. These vesicles have been associated with adaptation to environmental stress in other species, but their role in halophilic salt stress adaptation is not known. This study aimed to isolate and characterize the OMVs of Halomonas caseinilytica KB2 at various salt concentrations [6% (KB2-6), 12% (KB2-12), and 18% (KB2-18)] and to identify the patterns of adaptations to increasing salinity in its structure, protein composition, and expression. Also, a comparison with the composition of OMVs of E. coli, a mesophilic bacterium, was performed. Bioinformatics and statistical analysis were carried out to elucidate the underlying proteome differences that may exist as a result of increasing salinity. The results show that OMV production in H. caseinilytica KB2 is promoted by a decrease in salinity. OMVs also revealed possible structural and metabolic changes happening in the cells which led to the deduction that cells become more stable with increasing salt concentrations. Cell wall integrity, protein expression and folding are important. Although H. caseinilytica KB2 OMVs show cellular changes with changing salt concentration, they may not play a direct role in adaptation to changing salinity.

Suspended phospholipid bilayers: A new biological membrane mimetic

HypothesisThe attractive interaction between a cationic surfactant monolayer at the air–water interface and vesicles, incorporating anionic lipids, is sufficient to drive the adsorption and deformation of the vesicles. Osmotic rupture of the vesicles produces a continuous lipid bilayer beneath the monolayer. ExperimentalSpecular neutron reflectivity has been measured from the surface of a purpose-built laminar flow trough, which allows for rapid adsorption of vesicles, the changes in salt concentration required for osmotic rupture of the adsorbed vesicles into a bilayer, and for neutron contrast variation of the sub-phase without disturbing the monolayer. FindingsThe neutron reflectivity profiles measured after vesicle addition are consistent with the adsorption and flattening of the vesicles beneath the monolayer. An increase in the buffer salt concentration results in further flattening and fusion of the adsorbed vesicles, which are ruptured by a subsequent decrease in the salt concentration. This process results in a continuous, high coverage, bilayer suspended 11 Åbeneath the monolayer. As the bilayer is not constrained by a solid substrate, this new mimetic is well-suited to studying the structure of lipid bilayers that include transmembrane proteins.

NISIN and gilaburu (Viburnum opulus L.) combination is a cost-effective way to control foodborne Staphylococcus aureus

This study aims to elucidate the inhibitory activity of nisin alone or in combination with gilaburu ( Viburnum opulus L.) against the foodborne Staphylococcus aureus . The effect of nisin and gilaburu on the growth of S. aureus was investigated under different pH (5–7) and salt concentrations (NaCl, 0.5–4.5% w/v) at 30 °C. Nisin exhibited the best antibacterial activity at pH 5 with a minimum inhibitory concentration (MIC) of 25 μg/mL, while its MIC was 50 μg/mL in all salt concentrations when the pH was kept constant at pH 7. The MIC of gilaburu was found to be 50% in all conditions studied. The minimum bactericidal concentrations (MBC) of nisin and gilaburu were 100 μg/mL and >50%, respectively. Changes in pH and salt concentrations did not affect MBC. According to checkboard assay results, a synergy was found between gilaburu and nisin (FIC = 0.25) for both 2.5% and 4.5% w/v salt concentrations at pH 5. The synergistic interaction between nisin and gilaburu was also studied using an agar disk diffusion assay where nisin concentration was kept constant at 3.125 μg/ml, while gilaburu concentration varied between 3.125 and 100%. The positive effect of gilaburu on nisin activity was further confirmed by time-kill assay, flow cytometry, and measurement of relative TTC dehydrogenase activity and conductivity as well as DNA and protein leakage. In conclusion, nisin combined with gilaburu exerted the same inhibitory effect on S. aureus at a concentration approximately 8 times lower than that of MIC of nisin alone (25 μg/mL). This study shows the potential use of nisin and gilaburu in combination to control S. aureus in food. • S. aureus can be controlled with 8 times less nisin in the presence of gilaburu. • Synergy was found between gilaburu and nisin (FIC = 0.25) according to checkboard assay. • Synergistic effect of nisin and gilaburu on S. aureus was proven by different methods. • Nisin and gilaburu combination is an effective strategy to control S. aureus in food.

Fouling prediction of heat exchanger surface under alternating magnetic field based on IGWO–SVR

Crystallization fouling of a heat exchanger surface under an alternating magnetic field was studied by using a self-designed annular channel electromagnetic anti-fouling experiment platform to obtain experimental data including conductivity, induced current and fouling resistance in various magnetic induction intensities. The magnetic induction intensity of 300 Gs exhibited the best fouling inhibition effect, and the fouling inhibition rate was 78.89%. The induced current (first proposed in the research) was related to the change of magnetic induction intensity and salt concentration, which could directly reflect the characteristics of fouling resistance and alternating magnetic field. Based on the strong correlation between conductivity, induced current and fouling resistance, support vector regression (SVR) optimized by improved grey wolf algorithm (IGWO) was proposed to predict fouling resistance with conductivity and induced current as input variables, fouling resistance as output variable. Keeping other experimental conditions constant, the fouling resistance on the heat exchanger surface under the same and different magnetic induction intensities was predicted. Prediction results indicated that, the mean absolute percentage error was 3.24% for the former, 7.88% (300 Gs) and 4.04% (100 Gs) for the latter. IGWO–SVR had the highest prediction accuracy and the strongest generalization capability compared with support vector regression (SVR) and SVR optimized by genetic algorithm (GA–SVR), which demonstrated that IGWO–SVR was highly adaptable to predict fouling resistance in various situations.

Importance of Micromilieu for Pathophysiologic Mineralocorticoid Receptor Activity-When the Mineralocorticoid Receptor Resides in the Wrong Neighborhood.

The mineralocorticoid receptor (MR) is a member of the steroid receptor family and acts as a ligand-dependent transcription factor. In addition to its classical effects on water and electrolyte balance, its involvement in the pathogenesis of cardiovascular and renal diseases has been the subject of research for several years. The molecular basis of the latter has not been fully elucidated, but an isolated increase in the concentration of the MR ligand aldosterone or MR expression does not suffice to explain long-term pathologic actions of the receptor. Several studies suggest that MR activity and signal transduction are modulated by the surrounding microenvironment, which therefore plays an important role in MR pathophysiological effects. Local changes in micromilieu, including hypoxia, ischemia/reperfusion, inflammation, radical stress, and aberrant salt or glucose concentrations affect MR activation and therefore may influence the probability of unphysiological MR actions. The surrounding micromilieu may modulate genomic MR activity either by causing changes in MR expression or MR activity; for example, by inducing posttranslational modifications of the MR or novel interaction with coregulators, DNA-binding sites, or non-classical pathways. This should be considered when developing treatment options and strategies for prevention of MR-associated diseases.