Saccharomyces Cerevisiae Centromere Research Articles

Reconstitution reveals two paths of force transmission through the kinetochore.

Partitioning duplicated chromosomes equally between daughter cells is a microtubule-mediated process essential to eukaryotic life. A multi-protein machine, the kinetochore, drives chromosome segregation by coupling the chromosomes to dynamic microtubule tips, even as the tips grow and shrink through the gain and loss of subunits. The kinetochore must harness, transmit, and sense mitotic forces, as a lack of tension signals incorrect chromosome-microtubule attachment and precipitates error correction mechanisms. But though the field has arrived at a 'parts list' of dozens of kinetochore proteins organized into subcomplexes, the path of force transmission through these components has remained unclear. Here we report reconstitution of functional Saccharomyces cerevisiae kinetochore assemblies from recombinantly expressed proteins. The reconstituted kinetochores are capable of self-assembling in vitro, coupling centromeric nucleosomes to dynamic microtubules, and withstanding mitotically relevant forces. They reveal two distinct pathways of force transmission and Ndc80c recruitment.

Saccharomyces cerevisiae Centromere RNA Is Negatively Regulated by Cbf1 and Its Unscheduled Synthesis Impacts CenH3 Binding.

Two common features of centromeres are their transcription into noncoding centromere RNAs (cen-RNAs) and their assembly into nucleosomes that contain a centromere-specific histone H3 (cenH3). Here, we show that Saccharomyces cerevisiae cen-RNA was present in low amounts in wild-type (WT) cells, and that its appearance was tightly cell cycle-regulated, appearing and disappearing in a narrow window in S phase after centromere replication. In cells lacking Cbf1, a centromere-binding protein, cen-RNA was 5–12 times more abundant throughout the cell cycle. In WT cells, cen-RNA appearance occurred at the same time as loss of Cbf1’s centromere binding, arguing that the physical presence of Cbf1 inhibits cen-RNA production. Binding of the Pif1 DNA helicase, which happens in mid–late S phase, occurred at about the same time as Cbf1 loss from the centromere, suggesting that Pif1 may facilitate this loss by its known ability to displace proteins from DNA. Cen-RNAs were more abundant in rnh1Δ cells but only in mid–late S phase. However, fork pausing at centromeres was not elevated in rnh1Δ cells but rather was due to centromere-binding proteins, including Cbf1. Strains with increased cen-RNA lost centromere plasmids at elevated rates. In cbf1Δ cells, where both the levels and the cell cycle-regulated appearance of cen-RNA were disrupted, the timing and levels of cenH3 centromere binding were perturbed. Thus, cen-RNAs are highly regulated, and disruption of this regulation correlates with changes in centromere structure and function.

The Ndc80 complex bridges two Dam1 complex rings.

Strong kinetochore-microtubule attachments are essential for faithful segregation of sister chromatids during mitosis. The Dam1 and Ndc80 complexes are the main microtubule binding components of the Saccharomyces cerevisiae kinetochore. Cooperation between these two complexes enhances kinetochore-microtubule coupling and is regulated by Aurora B kinase. We show that the Ndc80 complex can simultaneously bind and bridge across two Dam1 complex rings through a tripartite interaction, each component of which is regulated by Aurora B kinase. Mutations in any one of the Ndc80p interaction regions abrogates the Ndc80 complex's ability to bind two Dam1 rings in vitro, and results in kinetochore biorientation and microtubule attachment defects in vivo. We also show that an extra-long Ndc80 complex, engineered to space the two Dam1 rings further apart, does not support growth. Taken together, our work suggests that each kinetochore in vivo contains two Dam1 rings and that proper spacing between the rings is vital.

Yeast Nkp2 is required for accurate chromosome segregation and interacts with several components of the central kinetochore

Kinetochores are macromolecular proteinaceous assemblies that are assembled on centromeres and attach chromosomes to the spindle fibres and regulate the accurate transmission of genetic material to daughter cells. Multiple protein sub-complexes within this supramolecular assembly are hierarchically assembled and contribute to the different aspects of kinetochore function. In this work we show that one of the components of the Saccharomyces cerevisiae kinetochore, Nkp2, plays an important role in ensuring accurate segregation of chromosomes. Although this protein is not conserved in higher organisms, we show that it interacts with highly conserved components of the kinetochore genetically and regulates chromosome segregation. We show that in kinetochore mutants like ctf19 and mcm21 the protein is mislocalized. Furthermore, removal of Nkp2 in these mutants restores normal levels of segregation.

Structural Integrity of Centromeric Chromatin and Faithful Chromosome Segregation Requires Pat1

The kinetochore (centromeric DNA and associated protein complex) is essential for faithful chromosome segregation and maintenance of genome stability. Here we report that an evolutionarily conserved protein Pat1 is a structural component of Saccharomyces cerevisiae kinetochore and associates with centromeres in a NDC10-dependent manner. Consistent with a role for Pat1 in kinetochore structure and function, a deletion of PAT1 results in delay in sister chromatid separation, errors in chromosome segregation, and defects in structural integrity of centromeric chromatin. Pat1 is involved in topological regulation of minichromosomes as altered patterns of DNA supercoiling were observed in pat1Δ cells. Studies with pat1 alleles uncovered an evolutionarily conserved region within the central domain of Pat1 that is required for its association with centromeres, sister chromatid separation, and faithful chromosome segregation. Taken together, our data have uncovered a novel role for Pat1 in maintaining the structural integrity of centromeric chromatin to facilitate faithful chromosome segregation and proper kinetochore function.

Nsl1p is essential for the establishment of bipolarity and the localization of the Dam-Duo complex.

We identified a physical complex consisting of Mtw1p, an established kinetochore protein, with Nnf1p, Nsl1p and Dsn1p and have demonstrated that Nnf1p, Nsl1p and Dsn1p localize to the Saccharomyces cerevisiae kinetochore. When challenged prior to metaphase, the temperature-sensitive mutants nsl1-16 and nsl1-42 as well as Nsl1p-depleted cells failed to establish a bipolar spindle-kinetochore interaction and executed monopolar segregation of sister chromatids. In contrast, an nsl1-16 defect could not be evoked after the establishment of bipolarity. The observed phenotype is characteristic of that of mutants with defects in the protein kinase Ipl1p or components of the Dam-Duo kinetochore complex. However nsl1 mutants did not exhibit a defect in microtubule-kinetochore untethering as the ipl1-321 mutant does. Instead, they exhibited a severe defect in the kinetochore localization of the Dam-Duo complex suggesting this to be the cause for the failure of nsl1 cells to establish bipolarity. Moreover the analysis of Nsl1p-depleted cells indicated that Nsl1p is required for the spindle checkpoint and kinetochore integrity.

Binding of the essential Saccharomyces cerevisiae kinetochore protein Ndc10p to CDEII.

Chromosome segregation at mitosis depends critically on the accurate assembly of kinetochores and their stable attachment to microtubules. Analysis of Saccharomyces cerevisiae kinetochores has shown that they are complex structures containing >/=50 protein components. Many of these yeast proteins have orthologs in animal cells, suggesting that key aspects of kinetochore structure have been conserved through evolution, despite the remarkable differences between the 125-base pair centromeres of budding yeast and the Mb centromeres of animal cells. We describe here an analysis of S. cerevisiae Ndc10p, one of the four protein components of the CBF3 complex. CBF3 binds to the CDEIII element of centromeric DNA and initiates kinetochore assembly. Whereas CDEIII binding by Ndc10p requires the other components of CBF3, Ndc10p can bind on its own to CDEII, a region of centromeric DNA with no known binding partners. Ndc10p-CDEII binding involves a dispersed set of sequence-selective and -nonselective contacts over approximately 80 base pairs of DNA, suggesting formation of a multimeric structure. CDEII-like sites, active in Ndc10p binding, are also present along chromosome arms. We propose that a polymeric Ndc10p complex formed on CDEII and CDEIII DNA is the foundation for recruiting microtubule attachment proteins to kinetochores. A similar type of polymeric structure on chromosome arms may mediate other chromosome-spindle interactions.

Hierarchical assembly of the budding yeast kinetochore from multiple subcomplexes.

Kinetochores are multiprotein complexes that assemble on centromeric DNA and attach chromosomes to spindle microtubules. Over the past six years, the number of proteins known to localize to the Saccharomyces cerevisiae kinetochore has increased from around 10 to over 60. However, relatively little is known about the protein-protein interactions that mediate kinetochore assembly or about the overall structure of microtubule-attachment sites. Here we used biophysical techniques, affinity purification, mass spectrometry, and in vivo assays to examine the state of association of 31 centromere-binding proteins, including six proteins newly identified as kinetochore subunits. We found that yeast kinetochores resemble transcriptional enhancers in being composed of at least 17 discrete subcomplexes that assemble on DNA to form a very large structure with a mass in excess of 5 MD. Critical to kinetochore assembly are proteins that bridge subunits in direct contact with DNA and subunits bound to microtubules. We show that two newly identified kinetochore complexes, COMA (Ctf19p-Okp1p-Mcm21p-Ame1p) and MIND (Mtw1p including Nnf1p-Nsl1p-Dsn1p) function as bridges. COMA, MIND, and the previously described Ndc80 complex constitute three independent and essential platforms onto which outer kinetochore proteins assemble. In addition, we propose that the three complexes have different functions with respect to force generation and MT attachment.

A system for deletion and complementation of Candida glabrata genes amenable to high-throughput application

We describe a method for deleting or modifying genes from the pathogenic fungus Candida glabrata as well as a companion vector for complementation or ectopic expression experiments. A linear deletion fragment generated by polymerase chain reaction was used to replace a gene of interest with the C. glabrata gene encoding imidazoleglycerol-phosphate dehydratase (HIS3). As test cases, the chromosomal loci of the C. glabrata genes encoding aminoimidazole ribonucleotide carboxylase (ADE2) and encoding isopropylmalate dehydrogenase (LEU2) were deleted. To facilitate application of the deletion technique to essential genes, we also contructed vectors to allow expression of a complementing copy of the wildtype gene under control of the copper-inducible C. glabrata metallothionein I (MT-1) promoter. One version of the vector carried the Saccharomyces cerevisiae centromere (CEN) and autonomously-replicating sequence (ARS) regions. The C. glabrataADE2 and LEU2 genes and a transposon-derived neomycin/kanamycin resistance gene were successfully expressed from this vector, with expression of the ADE2 and LEU2 genes complementing the ADE2 and LEU2 deletion mutations, respectively. However, this vector showed regulated expression only for the ADE2 gene. A second version of the vector, which carried an additional C. glabrataCEN and ARS region for stable plasmid maintenance, did show regulated expression for the LEU2 and neomycin/kanamycin resistance genes. This deletion and expression system is potentially applicable to any C. glabrata gene and is amenable to high-throughput application. We anticipate that these tools will have broad utility in deletion or modification of specific C. glabrata genes. This approach is also applicable to other yeast fungi.

A putative protein complex consisting of Ctf19, Mcm21, and Okp1 represents a missing link in the budding yeast kinetochore.

We have established a one-hybrid screen that allows the in vivo localization of proteins at a functional Saccharomyces cerevisiae centromere. Applying this screen we have identified three proteins-Ctf19, Mcm21, and the product of an unspecified open reading frame that we named Okp1-as components of the budding yeast centromere. Ctf19, Mcm21, and Okp1 most likely form a protein complex that links CBF3, a protein complex directly associated with the CDE III element of the centromere DNA, with further components of the budding yeast centromere, Cbf1, Mif2, and Cse4. We demonstrate that the CDE III element is essential and sufficient to localize the established protein network to the centromere and propose that the interaction of the CDE II element with the CDE III localized protein complex facilitates a protein-DNA conformation that evokes the active centromere.

Chapter 8 In Vitro Assays for Studying Saccharomyces cerevisiae Kinetochore Activity

This chapter describes the development of two assays to monitor Saccharomyces cerevisiae kinetochore function in vitro. The first assay is a bead-binding assay for studying the interaction of S. cerevisiae kinetochores with microtubules in vitro. In this assay, either wild-type CEN3 or CEN3 with the 3-bp deletion is attached to fluorescent beads. The beads are incubated with yeast extract in the presence of nonspecific carrier DNA and added to microtubules. While the beads with wild-type CEN3 bind to microtubules, the beads carrying CEN3 with 3-bp deletion fail to interact with microtubules. The second assay is a band shift assay for studying the interaction of the kinetochore complex with the CEN3.

Probing the Architecture of a Simple Kinetochore Using DNA–Protein Crosslinking

In budding yeast, accurate chromosome segregation requires that one and only one kinetochore assemble per chromosome. In this paper, we report the use of DNA-protein crosslinking and nondenaturing gel analysis to study the structure of CBF3, a four-protein complex that binds to the essential CDEIII region of Saccharomyces cerevisiae centromeres. We find that three subunits of CBF3 are in direct contact with CDEIII over a region of DNA that spans 80 bp. A highly asymmetric core complex containing p58(CTF13) p64(CEP3) and p110(NDC10) in direct contact with DNA forms at the genetically defined center of CDEIII. This core complex spans approximately 56 bp of CEN3. An extended complex comprising the core complex and additional DNA-bound p110(NDC10) also forms. It spans approximately 80 bp of DNA. CBF3 makes sequence-specific and -nonspecific contacts with DNA. Both contribute significantly to the energy of CBF3-DNA interaction. Moreover, important sequence-specific contacts are made with bases that are not conserved among yeast centromeres. These findings provide a foundation for understanding the organization of the CBF3-centromere complex, a structure that appears to initiate the formation of microtubule attachment sites at yeast kinetochores. These results also have implications for understanding centromere-binding proteins in higher cells.

Structural analysis of a Candida glabrata centromere and its functional homology to the Saccharomyces cerevisiae centromere.

A 451-bp fragment exhibiting centromere activity had been previously isolated from Candida glabrata genomic DNA. It contains three elements, CgCDEI, CgCDEII and CgCDEIII, highly homologous to those of Saccharomyces cerevisiae. In this study, the requirement of each element for centromere function was analyzed in detail. Deletion analysis identified a small fragment of 153 bp, which included all three elements, to be sufficient for centromere activity. Linker substitution analysis of CgCDEI and CgCDEIII revealed that both elements are required for centromere function. Some of the substitution mutations in CgCDEIII caused a complete loss of centromere activity. These results suggested a functional similarity of centromeres between C. glabrata and S. cerevisiae. However, the C. glabrata centromere did not function in S. cerevisiae cells, suggesting species specificity of the C. glabrata centromere. To examine whether species specificity of the centromeres between these two yeasts does exist, chimeric centromeres between the two species were constructed. Exchange of CgCDEII or CgCDEIII with CDEII or CDEIII of S. cerevisiae, respectively, increased C. glabrata centromere activity in S. cerevisiae, indicating participation of the two elements in determining the species specificity of centromere function.

The Saccharomyces cerevisiae kinetochore contains a cyclin-CDK complexing homologue, as identified by in vitro reconstitution.

We have developed methods to reconstitute the centromere DNA (CEN)-bound Saccharomyces cerevisiae kinetochore complex, CBF3, from isolated CBF3 components in vitro. This revealed that cooperation of at least three CBF3 components is imperatively required to form an activity that specifically binds to the centromere DNA in vitro. Two of the CBF3 proteins, Cbf3a and Cbf3b, that were used in the reconstitution were obtained from heterologous systems. In contrast, Cbf3c, the third CBF3 component known, had to be purified from S. cerevisiae to obtain a Cbf3c preparation that was competent to reconstitute the CBF3-CEN complex in combination with Cbf3a and Cbf3b. This led to the identification of a 29 kDa protein that co-purified with Cbf3c. The 29 kDa protein was shown to be a fourth component of CBF3 and therefore was named Cbf3d. Analysing the Cbf3d gene revealed that Cbf3d exhibits strong homology to p19SKP1, a human protein that is part of active cyclin A-CDK2 complexes. Therefore, Cbf3d is the only CBF3 protein that has a known homologue in higher eukaryotes and may provide the anchor that directs cell cycle-regulated proteins to the kinetochore.

Two-hybrid interaction of a human UBC9 homolog with centromere proteins of Saccharomyces cerevisiae.

Using a two-hybrid system, we cloned a human cDNA encoding a ubiquitin-conjugating enzyme (UBC), hUBC9, which interacts specifically with all three subunits of the Saccharomyces cerevisiae centromere DNA-binding core complex, CBF3. The hUBC9 protein shows highest homology to a new member of the UBC family: 54% identity to S. cerevisiae Ubc9p and 64% identity to Schizosaccharomyces pombe (Sp) hus5. Overexpression of hUBC9 partially suppresses a S. cerevisiae ubc9 temperature-sensitive mutation, indicating that the UBC9 gene family is also functionally conserved. Like hUBC9, Sphus5 also interacts specifically with all three subunits of the CBF3 complex. However, S. cerevisiae Ubc9p interacts only with the Cbf3p subunit (64 kDa) of the CBF3 complex, indicating the specificity of the interaction between S. cerevisiae Ubc9 and Cbf3p proteins. The function of Ubc9p in the G2/M phase of S. cerevisiae could be related to regulation of centromere proteins in chromosome segregation in mitosis. Therefore, the ubiquitination process and centromere function may be linked to chromosome segregation. We also provide further in vivo evidence that Mck1p, a protein kinase, is specifically associated with the centromere proteins Cbf2p and Cbf5p, which were previously shown to interact in vitro.

Two genes required for the binding of an essential Saccharomyces cerevisiae kinetochore complex to DNA.

Kinetochores are DNA-protein structures that assemble on centromeric DNA and attach chromosomes to spindle microtubules. Because of their simplicity, the 125-bp centromeres of Saccharomyces cerevisiae are particularly amenable to molecular analysis. Budding yeast centromeres contain three sequence elements of which centromere DNA sequence element III (CDEIII) appears to be particularly important. cis-acting mutations in CDEIII and trans-acting mutations in genes encoding subunits of the CDEIII-binding complex (CBF3) prevent correct chromosome transmission. Using temperature-sensitive mutations in CBF3 subunits, we show a strong correlation between DNA-binding activity measured in vitro and kinetochore activity in vivo. We extend previous findings by Goh and Kilmartin [Goh, P.-Y. & Kilmartin, J.V. (1993) J. Cell Biol. 121, 503-512] to argue that DNA-bound CBF3 may be involved in the operation of a mitotic checkpoint but that functional CBF3 is not required for the assembly of a bipolar spindle.

A zinc finger protein, essential for chromosome segregation, constitutes a putative DNA binding subunit of the Saccharomyces cerevisiae kinetochore complex, Cbf3.

A multisubunit protein complex, Cbf3, is a component of the Saccharomyces cerevisiae kinetochore. Cbf3 was recently shown to be essential for chromosome segregation in vivo and for movement of centromere DNA (CEN) along microtubules in vitro. Cbf3 contains three proteins, Cbf3a, Cbf3b and Cbf3c. Here the characterization of Cbf3b is described. Cbf3b contains an N-terminal Zn2Cys6 type zinc finger domain, a C-terminal acidic domain and a putative coiled coil dimerization domain. Cbf3b is essential for growth. Mutations within the zinc finger domain result in cells that exhibit a G2-M cell cycle delay and increased chromosome loss in each mitotic cell division. Therefore, Cbf3b has an essential function in chromosome segregation and the zinc finger domain executes part of this function presumably by providing the specific interaction between Cbf3 and CEN. Finally, data are provided to show that Cbf3c is encoded by CTF13, a gene that had been cloned recently by complementing a temperature sensitive mutant that exhibits chromosome loss as a result of a defective centromere.

Chromatin structure modulation in Saccharomyces cerevisiae by centromere and promoter factor 1.

CPF1 is an abundant basic-helix-loop-helix-ZIP protein that binds to the CDEI motif in Saccharomyces cerevisiae centromeres and in the promoters of numerous genes, including those encoding enzymes of the methionine biosynthetic pathway. Strains lacking CPF1 are methionine auxotrophs, and it has been proposed that CPF1 might positively influence transcription at the MET25 and MET16 genes by modulating promoter chromatin structure. We test this hypothesis and show that the regions surrounding the CDEI motifs in the MET25 and MET16 promoters are maintained in a nucleosome-free state and that this requires the entire CPF1 protein. However, the chromatin structure around the CDEI motifs does not change on derepression of transcription and does not correlate with the methionine phenotype of the cell. An intact CDEI motif but not CPF1 is required for transcriptional activation from a region of the MET25 upstream activation sequence. Our results suggest that CPF1 functions to modulate chromatin structure around the CDEI motif but that these changes at the MET25 and MET16 promoters do not explain how CPF1 functions to maintain methionine-independent growth. The presence of CPF1-dependent chromatin structures at these promoters leads to a weak repression of transcription.

Chromatin structure modulation in Saccharomyces cerevisiae by centromere and promoter factor 1.

CPF1 is an abundant basic-helix-loop-helix-ZIP protein that binds to the CDEI motif in Saccharomyces cerevisiae centromeres and in the promoters of numerous genes, including those encoding enzymes of the methionine biosynthetic pathway. Strains lacking CPF1 are methionine auxotrophs, and it has been proposed that CPF1 might positively influence transcription at the MET25 and MET16 genes by modulating promoter chromatin structure. We test this hypothesis and show that the regions surrounding the CDEI motifs in the MET25 and MET16 promoters are maintained in a nucleosome-free state and that this requires the entire CPF1 protein. However, the chromatin structure around the CDEI motifs does not change on derepression of transcription and does not correlate with the methionine phenotype of the cell. An intact CDEI motif but not CPF1 is required for transcriptional activation from a region of the MET25 upstream activation sequence. Our results suggest that CPF1 functions to modulate chromatin structure around the CDEI motif but that these changes at the MET25 and MET16 promoters do not explain how CPF1 functions to maintain methionine-independent growth. The presence of CPF1-dependent chromatin structures at these promoters leads to a weak repression of transcription.

Constant and variable parts of the 155-bp centromeric repeat in Camptochironomus

Centromeres in dipteran insects belonging to the subgenus Camptochironomus (C. tentans and C. pallidivittatus) contain tandem repeats of a 155-bp repeat. A special structural feature of the 155-bp unit is a region with two palindromes connected by a short piece of DNA with only AT base pairs, which has at least a superficial similarity to a functionally important part of the Saccharomyces cerevisiae centromere. As a parameter for functional importance we have measured frequencies of mutations along the unit in samples of repeats from the two species. We find that it consists of about equal parts of highly conserved and considerably less-conserved DNA. The palindromes are localized in the conserved part of the repeat.