Sabin Inactivated Poliovirus Vaccine Research Articles

Immuno-persistence of the different primary polio vaccine schedules and immunogenicity of the booster dose by sabin inactivated or bivalent oral poliovirus vaccine in children aged 4 years: an open-label, randomised, controlled phase 4 trial in China

Sabin inactivated and bivalent oral poliovirus vaccine (sIPV, bOPV) were commonly used in China since 2016. We conducted an open-label, randomised, controlled phase 4 trial to assess immune persistence following sequential immunisation with sIPV or bOPV, and immunogenicity and safety of a booster dose of poliovirus vaccine in children aged 4 years. Participants from a previous clinical trial with three different sequential schedules with sIPV (I) or bOPV (B) at ages 2, 3, and 4 months (Groups I-B-B, I-I-B, I-I-I) in 2017 were followed-up. The children were further divided into five subgroups after sIPV was given for Group I-B-B, and sIPV or bOPV randomly given for Group I-I-B and Group I-I-I (128 children in Groups I-B-B-I, 60 in Group I-I-B-B, 64 in Group I-I-B-I, 68 in Group I-I-I-B, 67 in Group I-I-I-I). Immune persistence and immunogenicity were assessed by measuring poliovirus type-specific antibodies, and safety were analysed in all children who received the booster dose. Between Dec 5, 2020 and Jun 30, 2021, we respectively enrolled 381 participants in the immune persistence analysis, and 352 participants in per protocol (PP) analysis of the immunogenicity of the booster immunisation. Seropositivity rates of antibodies against poliovirus types 1 and 3 were all >90% four years after primary immunisation, while for poliovirus type 2 were 46.83%, 75.41%, and 90.23% (χ2=60.948, P<0.001) for Groups I-B-B, I-I-B, and I-I-I, respectively. After the booster dose, seropositivity rates were 100% for all three serotypes in Group I-B-B-I, I-I-B-I and I-I-I-I; In Group I-I-B-B and I-I-I-B, the seropositivity rates for types 1 and 3 were all 100%, for type 2 were 92.59% and 98.46%. The geometric mean titres (GMTs) against poliovirus 1 and 3 were all high in five groups (>1860.73), and the GMTs against type 2 were significantly lower in groups booster with bOPV: Group I-I-B-B (50.60) and Group I-I-I-B (247.84). There was no significant difference in seropositivity rates or GMTs for all three serotypes (P>0.05) between Group I-I-B-I and I-I-I-I. No serious adverse events occurred during the study. Our findings suggest that at least two sIPV doses are needed in the current routine poliovirus immunisation schedule, and schedules containing 3 or 4 doses of sIPV provide better protection against poliovirus type 2 than the current sIPV-sIPV-bOPV-bOPV schedule in China. Medical and Health Science and Technology of Zhejiang Province (2021KY118). This trial was registered with ClinicalTrials.gov (NCT04576910).

Study of three kinds of primary immunization schedules with poliovirus vaccine

Objective: To compare the immunogenicity of three kinds immunization programs with poliovirus vaccine. Methods: Healthy infants aged 2 months or over were selected and divided into three groups by complete randomization method. Basic immunization with Sabin inactivated poliovirus vaccine(sIPV) and bivalent oral poliovirus vaccine(bOPV) were completed. Three kinds of basic immunization procedures were 1sIPV+2bOPV,2sIPV+1bOPV and 3sIPV, respectively.Two qualified serums that before basic immunization and 28-42 days later were collected, and measured the poliovirus neutralizing antibody with microcell neutralization method. To compare the difference by analysis of variance, rank test and χ2 test. Results: After the basic immunization, 205 subjects of the positive conversion rate of poliovirus neutralizing antibodies of types Ⅰ, Ⅱ and Ⅲwere all higher than 97.00%, and the positive rates were all higher than 98.00%, the geometric mean titer (GMT) of neutralizing antibody was significantly higher than that before basic immunization in three groups.There were significant differences in the positive rate and GMT before and after basic immunization of typeⅠ, Ⅱand Ⅲ in the three (P<0.05). The highest GMT in three groups after basic immunization were all typeⅠ, followed by type Ⅲ, and the lowest in type Ⅱ. The GMT of type Ⅱin 2sIPV+1bOPV and 3sIPV groups were both higher than that in sIPV+2bOPV group. Conclution: After three kinds of basic immunization, the poliovirus neutralizing antibodies of serum were all at high levels in three groups, which could form an effective immune barrier against poliovirus. The immunogenicity of three kinds of basic immunization programs were all well, but there were certain differences of neutralizing antibodies among three kinds basic immunization programs. The immunogenicity in 2sIPV+1bOPV and 3sIPV groups against typeⅡpoliovirus were better than that in 1sIPV+2bOPV group.

Safety and immunogenicity of 3 formulations of a Sabin inactivated poliovirus vaccine produced on the PER.C6® cell line: A phase 2, double-blind, randomized, controlled study in infants vaccinated at 6, 10 and 14 weeks of age

ABSTRACT An inactivated poliovirus vaccine candidate using Sabin strains (sIPV) grown on the PER.C6® cell line was assessed in infants after demonstrated immunogenicity and safety in adults. The study recruited 300 infants who were randomized (1:1:1:1) to receive one of 3 dose levels of sIPV or a conventional IPV based on Salk strains (cIPV). Poliovirus-neutralizing antibodies were measured before the first dose and 28 days after the third dose. Reactogenicity was assessed for 7 days and unsolicited adverse events (AEs) for 28 days after each vaccination. Serious AEs (SAEs) were recorded throughout the study. Solicited AEs were mostly mild to moderate. None of the SAEs reported in the study were judged vaccine related, including one fatal SAE due to aspiration of vomitus that occurred 26 days after the third dose of low-dose sIPV. After 3 sIPV vaccinations and across all dose levels, seroconversion (SC) rates were at least 92% against Sabin poliovirus types and at least 80% against Salk types, with a dose-response in neutralizing antibody geometric mean titers (GMTs) observed across the 3 sIPV groups. Compared to cIPV, the 3 sIPV groups displayed similar or higher SC rates and GMTs against the 3 Sabin types but showed a lower response against Salk types 1 and 2; this was most visible for Salk type 1. While the PER.C6® cell line-based sIPV showed an acceptable safety profile and immunogenicity in infants, lower seroprotection against type 1 warrants optimization of dose level and additional clinical evaluation.

The impact of different IPV-OPV sequential immunization programs on hepatitis A and hepatitis B vaccine efficacy

ABSTRACT In recent years, the Global Polio Eradication Initiative has gradually implemented a global shift in polio immunization programs. Few studies cover polio immunization program impacts on the efficacy of other vaccines. This study investigated whether polio immunization programs affected hepatitis A (HepA) and hepatitis B (HepB) vaccination efficacy. Serum samples were collected from 968 infants before the first dose of polio vaccine, 28 days after completing primary polio immunization, and at 24 months old. Infants were classified into six polio immunization program groups: 1sIPV+2bOPV, 2sIPV+1bOPV, 2sIPV+1tOPV, 1cIPV+2bOPV, 2cIPV+1bOPV, and 2cIPV+1tOPV (sIPV: Sabin inactivated poliovirus vaccine; cIPV: Salk inactivated poliovirus vaccine; b, bivalent; t, trivalent; OPV, oral polio vaccine). No significant differences existed in antibody titers against HepA virus (anti-HAV) among the polio immunization program groups at any of the three time points (pre-first dose [p = 0.412], 28 days after primary immunization [p = 0.676], 24 months old [p = 0.556]). Before the first dose (p = 0.178) and at age 24 months (p = 0.987), no significant differences existed in HepB surface antibody (HBsAb) titers between the six polio immunization program groups). Twenty-eight days after primary immunization, no significant difference existed in HBsAb titers between groups after Bonferroni correction. Following HepA and HepB immunization, anti-HAV and HBsAb positivity reached > 98% in all groups, reflecting effective immunization. Our data suggest that different polio immunization programs did not affect HepA and HepB vaccine efficacy; HepA and HepB vaccines maintained high effectiveness irrespective of polio immunization program. This trial was registered on Clinical Trials.gov: NCT03614702.

Immunochemical and biophysical characterization of inactivated Sabin poliovirus products: Insights into rapid quality assessment tools

The aim of this study was to demonstrate the strength of combining immunochemical and biophysical analysis tools for assessing the quality of Sabin inactivated poliovirus vaccine (Sabin-IPV) bulk products. We assessed Sabin-IPV serotypes 1, 2 and 3 from six different manufacturers and evaluated their comparability through biosensor analysis and biophysical characterization methods, including tryptophan fluorescence and asymmetrical flow field-flow fractionation – multi-angle light scattering analysis. These methods enabled us to assess antigenic as well as conformational and structural integrity profiles, respectively. Based on Sabin-IPV samples that were subjected to accelerated storage conditions, we revealed that existing immunochemical methods exhibit remarkably similar trends to the results obtained by the biophysical characterization methods. While the results underpin that the comparability of Sabin-IPV bulk products of different manufacturers is weak, information about their quality can rapidly be obtained by using both immunochemical and biophysical methods. Furthermore, the study highlights that quality assessment of Sabin-IPV can be obtained through biophysical techniques can complement the assessments performed with monoclonal antibodies and suggests that similar techniques could be employed to characterize other enteroviruses.

Comparison of the neutralizing activities of antibodies in clinical sera against both Sabin and wild-type polio pseudoviruses

The cost-effectiveness of the Sabin inactivated poliovirus vaccine derived from the Sabin strains (S-IPV) and its reduced biosecurity risks during its manufacture make it the vaccine of choice over the IPVs derived from wild-type polioviruses. However, it is difficult to evaluate whether S-IPVs can achieve wild-type poliovirus containment in China, making its development there less attractive. To facilitate the development and adoption of S-IPVs in China, the aim of this study was to develop an alternative neutralizing assay using either a polio pseudovirus derived from a Sabin strain (S-pNA) or one derived from a wild-type strain (w-pNA) to replace the conventional neutralizing assay which uses live polioviruses. A total of 100 sera were collected from children immunized with an oral poliovirus vaccine and their antibody titers were assessed by both the S-pNA and w-pNA. The results showed that this method was feasible for the quantification of neutralizing antibody activities in the sera of the vaccinated individuals. The Wilcoxon signed-rank sum test indicated that the neutralizing antibody titers obtained against the Sabin strains were higher than those obtained with the wild-type strains for types 1 and 3, while for type 2, the titers against the wild-type strains were higher than those against the Sabin strains (p < 0.001 for all three types). It is hoped that this assay could be used to assess whether immune sera by the S-IPV possess adequate neutralizing capacity against both attenuated and wild-type poliovirus strains.

Cross-neutralization Capacity of Immune Serum from Different Dosage of Sabin Inactivated Poliovirus Vaccine Immunization against Multiple Individual Polioviruses

ABSTRACT Introduction: Sabin strain inactivated poliovirus vaccine (sIPV) developed by Sinovac Biotech Co., Ltd., has shown good safety and immunogenicity against parental strains among infants in several finished pre-licensure clinical trials. Areas covered: To further study the neutralizing capacity of investigational sIPV immune serum against Sabin, Salk and recently circulating poliovirus strains, neutralization assay against ten individual strains was performed on backup serum collected from 250 infant participants of the finished phase II clinical trial. Expert commentary:: The sIPV can generate good immunogenicity against Sabin, Salk and recently circulating poliovirus strains. Taking into account its lower containment requirements and financial costs compared with the conventional Salk strain inactivated poliovirus vaccine, sIPV is an affordable and practical option for polio eradication.

Immunogenicity of two-dose and three-dose vaccination schedules with Sabin inactivated poliovirus vaccine in China: An open-label, randomized, controlled trial

BackgroundWe assessed immunogenicity of three-dose and two-dose immunization schedules with a Sabin-strain inactivated poliovirus vaccine (sIPV) produced by one Chinese vaccine manufacturer. MethodsThis was an open label, randomized, controlled trial conducted in 16 vaccination clinics in Shandong province. Infants were allocated randomly to either a 3-dose study arm (sIPV administered at 2, 3, and 4 months of age) or a 2-dose arm (sIPV administered at 4 and 8–11 months of age). Poliovirus neutralizing antibodies were measured in sera collected prior to the first sIPV dose and one month after the last dose. FindingsWe enrolled 560 infants; 536 (95.7%) completed the study. Final seropositivity rates were >98% for all three serotypes in both study arms. There were no statistically significant differences in seropositivity between the 2-dose and the 3-dose schedule. Final median reciprocal titres of polio antibodies were high overall (>1:768 for all serotypes) and statistically significantly higher in 2-dose recipients compared with 3-dose recipients (p < 0.001). InterpretationThis study offers evidence that two doses of sIPV administered at 4 and 8–11 months of age and three doses of sIPV administered at 2, 3, and 4 months of age both provide serological protection against poliomyelitis. Median reciprocal titres of polio antibodies were high overall, and were more related to the interval between doses than the number of doses, with the longer interval of the 2-dose schedule producing higher reciprocal titres than the shorter-interval 3-dose schedule. The protection provided by the 3-dose schedule is achieved earlier in life than the protection with the 2-dose schedule. Countries planning to use an IPV-only schedule in the post-eradication era can consider this 2-dose sIPV option as an immunogenic and dose-sparing strategy. FundingWorld Health Organization (from a grant from International PolioPlus Committee, Rotary International, Evanston, IL, USA).

Physicochemical Characterization of Sabin Inactivated Poliovirus Vaccine for Process Development.

Upscaling the production capacity of inactivated poliovirus vaccines (IPV) is urgently needed to eradicate polio worldwide. For the development of a robust manufacturing process for IPV, the impact of stresses on the properties of the poliovirus during manufacturing needs to be carefully evaluated. In this study, the physicochemical properties of Sabin poliovirus after low pH exposure were analyzed by asymmetrical flow field-flow fractionation coupled to multi-angle laser light scattering (AF4-MALS), sedimentation velocity analytical ultracentrifugation (SV-AUC), transmission electron microscopy (TEM), dynamic light scattering (DLS) and surface plasmon resonance (SPR). Low pH stress caused structural changes and aggregation of inactivated poliovirus virions, whereas degraded virion particles would not revert to native virions even after neutralization. Importantly, a complete loss of the D-antigenicity of IPV by low pH stress, followed by neutralization, was observed in SPR. These results suggest that the exposure of poliovirus particle to low pH stress would induce irreversible denaturation and aggregation of virus particles and lead to the loss of D-antigenicity; thus, low pH stress during the manufacturing of poliovirus vaccine should be minimized. The analytical methods above can be efficiently utilized in the development of high-integrity manufacturing processes and high-quality vaccines.

Safety and immunogenicity of a new Sabin inactivated poliovirus vaccine candidate produced on the PER.C6® cell-line: a phase 1 randomized controlled trial in adults

ABSTRACT This first-in-human study (NCT03032588), conducted in Belgium, evaluated a new inactivated poliovirus vaccines (IPV) candidate based on Sabin poliovirus strains grown on the high-yield PER.C6® cell line. Healthy adults (N = 32) were randomized (1:1) to receive a single dose of PER.C6-based Sabin-IPV (sIPV, 15:35:112.5 DU/dose) or conventional Salk-IPV (cIPV, 40:8:32 DU/dose). Reactogenicity was assessed up to 7 days after vaccination, immunogenicity 28 days after vaccination, and safety up to 6 months after vaccination. Solicited adverse events (AEs) were mild to moderate, no changes of concern in vital signs or safety laboratory values were observed, and no severe AEs (SAEs) or vaccine-related unsolicited AEs were reported after vaccination. A trend to more frequent solicited AEs after sIPV than after cIPV administration was observed. Most participants had preexisting neutralizing antibodies against poliovirus types (titer ≥8), which were strongly boosted by sIPV. Post-vaccination geometric mean titers were high (≥12,000) and similar across the two vaccination groups. Only participants with very high preexisting antibody levels did not show a vaccine-induced response, defined in seropositive participants as a 4-fold titer increase. The 10 initially seronegative (titer <8) participants (n = 5 in each study group) seroconverted and all participants had seroprotective antibody levels post-vaccination. The antibodies elicited by sIPV neutralized both Sabin and Salk poliovirus strains. In conclusion, the PER.C6®-based sIPV was well tolerated and highly immunogenic in adults with preexisting antibodies to poliovirus.

The effect of maternal poliovirus antibodies on the immune responses of infants to poliovirus vaccines

BackgroundMaternal poliovirus antibodies could provide passive immunity to the newborns from poliovirus infection during their first few months of life, but they may impair the immune responses of infants to the poliovirus vaccine as well. In our study, we pooled the data from three clinical trials of the inactivated poliovirus vaccine (IPV) based on Sabin strains to investigate the effect of maternal poliovirus antibodies on the immune responses of infants to poliovirus vaccines.MethodsThere were five groups in the pooled analysis, including low-dose Sabin IPV, medium-dose Sabin IPV, high-dose Sabin IPV, control Sabin IPV, and control Salk IPV groups. We reclassified the infants in different groups according to their maternal poliovirus antibodies by two methods, the first one included maternal antibody negative (< 1:8) and maternal antibody positive (≥1:8), and the second one included maternal antibody titer < 1:8, 1:8 ~ < 1:32 and ≥ 1:32. Then, we compared the geometric mean titers (GMTs), geometric mean antibody fold increases (GMIs) and seroconversion rates of poliovirus type-specific neutralizing antibodies after vaccination among participants with different maternal poliovirus antibody levels.ResultsThe GMTs and GMIs of three types of poliovirus antibodies after vaccination in maternal antibody negative participants were significantly higher than those in maternal antibody positive participants. The seroconversion rates of type II and type III poliovirus antibodies in maternal antibody positive participants were significantly lower than those in maternal antibody negative participants. Among participants with maternal antibody titer < 1:8, 1:8 ~ < 1:32 and ≥ 1:32, the GMTs and GMIs of three types of poliovirus antibodies after vaccination showed a tendency to decline with the increasing of maternal antibody levels. The seroconversion rates of three types of poliovirus antibodies in participants with maternal antibody titer ≥1:32 were significantly lower than those in participants with maternal antibody titer < 1:8 and 1:8 ~ < 1:32.ConclusionsMaternal poliovirus antibodies interfered with the immune responses of infants to poliovirus vaccines, and a high level of maternal antibodies exhibited a greater dampening effect.Trial registrationClinicalTrials.govNCT04264598 February 11, 2020; ClinicalTrials.govNCT04264546 February 11, 2020; ClinicalTrials.govNCT03902054 April 3, 2019. Retrospectively registered.

Immunogenicity of three sequential schedules with Sabin inactivated poliovirus vaccine and bivalent oral poliovirus vaccine in Zhejiang, China: an open-label, randomised, controlled trial

The globally synchronised introduction of inactivated poliovirus vaccine (IPV) and replacement of trivalent oral poliovirus vaccine (OPV) with bivalent OPV (bOPV) were successfully implemented in China's routine immunisation programme in May, 2016. In response to the global shortage of Salk-strain IPV, Sabin-strain IPV production was encouraged to develop and use in low-income and middle-income countries. We assessed the immunogenicity of the current routine poliovirus vaccination schedule in China and compared it with alternative schedules that use Sabin-strain IPV (sIPV) and bOPV. This open-label, randomised, controlled trial recruited healthy infants aged 60-75 days from two centres in Zhejiang, China. Eligible infants were full-term, due for their first polio vaccination, weighed more than 2·5 kg at birth, were healthy on physical examination with no obvious medical conditions, and had no contraindications to vaccination. Infants were randomly assigned (1:1:1) using permuted block randomisation (block size of 12) to one of three polio vaccination schedules, with the first, second, and third doses given at ages 2 months, 3 months, and 4 months, respectively: sIPV-bOPV-bOPV (1sIPV+2bOPV group; current regimen), sIPV-sIPV-bOPV (2sIPV+1bOPV group), or sIPV-sIPV-sIPV (3sIPV group). The primary endpoint was the proportion of infants with seroconversion to each of the three poliovirus serotypes 1 month after the third dose. Serious and medically important adverse events were monitored for up to 30 days after each vaccination. We assessed immunity in the per-protocol population (all children who completed all three vaccinations and had pre-vaccination and post-vaccination laboratory data) and safety in all children who received at least one dose of study vaccine. This trial is registered with Clinicaltrials.gov, NCT03147560. Between May 1, 2016, and Dec 1, 2017, we enrolled and randomly assigned 528 eligible infants to one of the three treatment groups (176 in each group); 473 infants (158 in the 1sIPV+2bOPV group, 152 in the 2sIPV+1bOPV group, and 163 in the 3sIPV group) were included in the per-protocol population. 100% seroconversion against poliovirus types 1 and 3 was observed in all three groups. Infants who received an immunisation schedule containing bOPV had significantly higher antibody titres against poliovirus types 1 and 3 than did the sIPV-only group (2048 in all three treatment groups; p<0·0001). Seroconversion against type 2 poliovirus was observed in 98 (62%) infants in the 1sIPV+2bOPV group, 145 (95%) infants in the 2sIPV+1bOPV group, and 161 (99%) infants in the 3sIPV group. No serious adverse events occurred during the study; 14 minor, transient adverse events were observed, with no significant differences across study groups. All three study schedules were well tolerated and highly immunogenic against poliovirus types 1 and 3. Schedules containing two or three sIPV doses had higher seroconversion rates against poliovirus type 2 than did the schedule with a single dose of sIPV. Our findings support inclusion of two sIPV doses in the routine poliovirus vaccination schedule in China to provide better protection against poliovirus type 2 than provided by the current regimen. Chinese Center for Disease Control and Prevention and China National Biotec Group Company.

Potency of the Sabin inactivated poliovirus vaccine (sIPV) after exposure to freezing temperatures in cold chains

ABSTRACT With more demand for Sabin inactivated poliovirus vaccines (sIPVs) to support the global polio eradication effort worldwide, data regarding the potency characteristics of sIPV after exposure to freezing temperatures are urgently required. In the present study, the sIPVs were stored at −20°C for 24 h, 1 week, and 2 weeks in the freezer or in a vaccine carrier for 1 or 3 freeze-thaw cycle to evaluate the effect mediated by freezing temperatures that may be encountered during routine storage and transfer. The in vitro potency was then determined by a D-antigen enzyme-linked immunosorbent assay, and the in vivo potency was evaluated in Wistar rats. In the in vitro study for freezer storage groups, the D-antigen contents for all three types decreased and were lower than the release specifications after storing at −20°C for 2 weeks. After storing at −20°C for 1 week, the D-antigen contents for types I and III in combined group of a total of 45 vials, and for type II in the specific lot groups containing 15 vials decreased, but were within the release specifications. Moreover, no significant change in in vivo potency was observed. For vaccine carrier transfer groups, the D-antigen contents did not decrease after 1 freeze-thaw cycle; in contrast, it decreased, but no significant in vivo potency loss was observed after 3 freeze-thaw cycles. These results suggest that it may be possible to retain sufficient sIPV potency after short periods of freezing or freeze-thawing during transport.

Safety and Immunogenicity of a Sabin Inactivated Poliovirus Vaccine

Safety and Immunogenicity of a Sabin Inactivated Poliovirus Vaccine

Safety and Immunogenicity of a Sabin Inactivated Poliovirus Vaccine (Phase Ib)

Safety and Immunogenicity of a Sabin Inactivated Poliovirus Vaccine (Phase Ib)

Skin delivery of trivalent Sabin inactivated poliovirus vaccine using dissolvable microneedle patches induces neutralizing antibodies

The cessation of the oral poliovirus vaccine (OPV) and the inclusion of inactivated poliovirus (IPV) into all routine immunization programmes, strengthens the need for new IPV options. Several novel delivery technologies are being assessed that permit simple yet efficacious and potentially dose-sparing administration of IPV. Current disadvantages of conventional liquid IPV include the dependence on cold chain and the need for injection, resulting in high costs, production of hazardous sharps waste and requiring sufficiently trained personnel. In the current study, a dissolvable microneedle (DMN) patch for skin administration that incorporates trivalent inactivated Sabin poliovirus vaccine (sIPV) was developed. Microneedles were physically stable in the ambient environment for at least 30 min and efficiently penetrated skin. Polio-specific IgG antibodies that were able to neutralize the virus were induced in rats upon administration using trivalent sIPV-containing microneedle patches. These sIPV-patch-induced neutralizing antibody responses were comparable to higher vaccine doses delivered intramuscularly for type 1 and type 3 poliovirus serotypes. Moreover, applying the patches to the flank elicited a significantly higher antibody response compared to their administration to the ear. This study progresses the development of a skin patch-based technology that would simplify vaccine administration of Sabin IPV and thereby overcome logistic issues currently constraining poliovirus eradication campaigns.

Accelerating bioprocess development by analysis of all available data: A USP case study

Bioprocess development generates extensive datasets from different unit operations and sources (e.g. time series, quality measurements). The development of such processes can be accelerated by evaluating all data generated during the experimental design. This can only be achieved by having a clearly defined data logging and analysis strategy. The latter is described in this manuscript. It consists in a combination of a feature based approach along with principal component analysis and partial least square regression.Application of this combined strategy is illustrated by applying it in an upstream processing (USP) case study. Data from the development and optimization of an animal component free USP of Sabin inactivated poliovirus vaccine (sIPV) was evaluated. During process development, 26 bioreactor runs at scales ranging from 2.3 to 16 L were performed. Several operational parameters were varied, and data was routinely analyzed following a design of experiments (DoE) methodology.With the strategy described here, it became possible to scrutinize all data from the 26 runs in a single data study. This included the DoE response parameters, all data generated by the bioreactor control systems, all offline data, and its derived calculations. This resulted in a more detailed, reliable and exact view on the most important parameters affecting bioreactor performance.In this case study, the strategy was applied for the analysis of previously produced data. Further development will use this data analysis methodology for continuous enhancing and accelerating process development, intensified DoE and integrated process modelling.

Immunogenicity of Three Sequential Schedules with Sabin Inactivated Poliovirus Vaccine and Bivalent Oral Poliovirus Vaccine: An Open-Label, Randomized, Controlled Trail in Zhejiang, China

Background: The globally-synchronized introduction of inactivated poliovirus vaccine (IPV) and replacement of trivalent oral poliovirus vaccine (tOPV) with bivalent oral poliovirus vaccine (bOPV) was successfully implemented in China's routine immunization system in April and May of 2016. We assessed the immunogenicity of the current routine poliovirus vaccination schedule and compared it to alternative schedules that use Sabin-strain IPV (sIPV) and bOPV. Methods: We conducted an open-label, randomized, controlled trial among healthy infants in Zhejiang province, China. After obtaining informed consent, infants were randomly allocated to receive three polio vaccinations at age 2, 3 and 4 months in one of three sequential schedules: sIPV-bOPV-bOPV (Group 1), sIPV-sIPV-bOPV (Group 2), or sIPV-sIPV-sIPV (Group 3). We assessed immunogenicity in the three groups by measuring poliovirus type-specific antibody levels in sera immediately before the first dose and one month after the third dose. We assessed immunity in a per-protocol (PP) analysis (among subjects with no protocol deviations), and assessed safety in an intention-to-treat analysis (among subjects receiving at least one dose of study vaccine). Results: We enrolled and assigned 528 eligible infants to one of the three treatment groups (176 in each group); 473 infants (158 in Group 1, 152 in Group 2, and 163 in Group 3) completed the PP requirements. Three doses of sIPV or bOPV elicited seroconversion in 100% of subjects against poliovirus types 1 and 3 regardless of study group. Infants who received sIPV followed by bOPV had significantly higher antibody titers against poliovirus types 1 and 3 than did the sIPV-only group. Seroconversion against type 2 polio was observed in 62.03% of Group 1 infants, 95.39% of Group 2 infants, and 98.77% of Group 3 infants. The percentages of children with seroprotective antibody titers to poliovirus type 2 after vaccination were 63.29%, 96.05%, and 98.77% in Groups 1, 2, and 3. No serious adverse events occurred during the study; 14 minor, transient adverse events were observed with no significant differences across study groups. Conclusion: All three study schedules were well tolerated and highly immunogenic against poliovirus types 1 and 3. Schedules containing 2 or 3 sIPV doses had higher seroconversion rates against poliovirus type 2 than the schedule with a single dose of sIPV. Our findings support using a two-sIPV-dose routine poliovirus vaccination schedule in China to provide better protection against poliovirus type 2. Clinical Trial Number: The study is registered with ClinicalTrials.gov, number NCT03147560, and has been completed. Funding Statement: The study was funded by Chinese Center for Disease Control and Prevention (funds number: 131031001000150001) and China National Biotec Group Company (CNBG). Declaration of Interests: Yan Liu received grants from Zhejiang provincial basic public welfare research projects (LGF18H260002) and Hangzhou research projects for agricultural and social development (20180533B94). Ethics Approval Statement: The study protocol was approved by the ethics committee of Zhejiang Provincial Center for Disease Control and Prevention. Written informed consent was obtained from legal guardians of the subjects before enrollment.

Safety and Immunogenicity of a Sabin Inactivated Poliovirus Vaccine.

Safety and Immunogenicity of a Sabin Inactivated Poliovirus Vaccine.

Development of Thermostable Lyophilized Sabin Inactivated Poliovirus Vaccine.

As oral poliovirus vaccine (OPV) causes vaccine-associated paralytic poliomyelitis, the polio endgame strategy introduced by the Global Polio Eradication Initiative calls for a phased withdrawal of OPV and an introduction of inactivated poliovirus vaccine (IPV). The introduction of IPV creates challenges in maintaining the cold chain for vaccine storage and distribution. Recent advances in lyophilization have helped in finding a temperature-stable formulation for multiple vaccines; however, poliovirus vaccines have yet to capture a stable, safe formula for lyophilization. In addition, efficient in vitro methods for antigen measurement are needed for screening stable vaccine formulations. Here, we report size exclusion high-performance liquid chromatography (SE-HPLC) as a reliable means to identify the leading lyophilized formulation to generate thermostable Sabin inactivated poliovirus vaccine (sIPV). High-throughput screening and SE-HPLC determined the leading formulation, resulting in 95% D-antigen recovery and low residual moisture content of sIPV following lyophilization. Furthermore, the lyophilized sIPV remained stable after 4 weeks of incubation at ambient temperature and induced strong neutralizing antibodies and full protection of poliovirus receptor transgenic mice against the in vivo challenge of wild-type poliovirus. Overall, this report describes a novel means for the high-throughput evaluation of sIPV antigenicity and a thermostable lyophilized sIPV with in vivo vaccine potency.IMPORTANCE Poliomyelitis is a highly contagious disease caused by the poliovirus. While the live attenuated OPV has been the vaccine of choice, a major concern is its ability to revert to a form that can cause paralysis, so-called vaccine-associated paralytic poliomyelitis. Therefore, the new endgame strategy of the Global Polio Eradication Initiative includes the introduction of an IPV. However, the feasibility of the use of current IPV formulations in developing countries is limited, because IPV is insufficiently stable to be purified, transported, and stored under unrefrigerated conditions. We successfully designed the sIPV for use in the dry state that maintains the full vaccine potency in animal models after incubation at ambient temperature. This report provides, for the first time, candidate formulations of sIPV that are stable at elevated temperatures.