Ruthenium Benzylidene Research Articles

Tuning the Latency by Anionic Ligand Exchange in Ruthenium Benzylidene Phosphite Complexes

Recently discovered cis-dichloro benzylidene phosphite complexes are latent catalysts at room temperature and exhibit exceptional thermal and photochemical activation behavior in olefin metathesis reactions. Most importantly, the study of these catalysts has allowed their introduction in efficient 3-D printing applications of ring-opening metathesis derived polymers and the control of chromatically orthogonal chemical processes. Moreover, their combination with plasmonic Au-nanoparticles has given rise to novel smart materials that are responsive to light. Given the importance of the ligand shell in the initiation and reactivity behavior of this family of complexes, we set out to investigate the effect of anionic ligand exchange. Thus, we report herein two new ruthenium benzylidene benzylphosphite complexes where the chloride anionic ligands have been replaced by bromide and iodide anions (cis-Ru-Phos-Br2 & cis-Ru-Phos-I2). The thermal and photochemical activations of these dormant catalysts in a variety of ring-closing and ring-opening metathesis polymerization (RCM and ROMP) reactions were thoroughly studied and compared with the previously known chloride precatalyst. Photochemical RCM studies provided similar results, especially in non-hindered reactions, with the UV-A wavelength being the best in all cases. On the other hand, the thermal activation profile exposed that the anionic ligand significantly affects reactivity. Notably, cis-Ru-Phos-I2 disclosed particularly impressive initiation efficiency compared to the other members of the family.

Ancillary Ligand Lability Improves Control in Cyclic Ruthenium Benzylidene Initiated Ring-Expansion Metathesis Polymerizations.

The synthesis of well-defined cyclic polymers is crucial to exploring applications spanning engineering, energy, and biomedicine. These materials lack chain-ends and are therefore imbued with unique bulk properties. Despite recent advancements, the general methodology for controlled cyclic polymer synthesis via ring-expansion metathesis polymerization (REMP) remains challenging. Low initiator activity leads to high molar mass polymers at short reaction times that subsequently "evolve" to smaller polymeric products. In this work, we demonstrate that in situ addition of pyridine to the tethered ruthenium-benzylidene REMP initiator CB6 increases ancillary ligand lability to synthesize controlled and low dispersity cyclic poly(norbornene) on a short time scale without relying on molar mass evolution events.

Ruthenium Metathesis Catalysts with Imidazole Ligands

Phosphine-free ruthenium benzylidene complexes containing imidazole ligands are reported. These catalysts are effective for ring-closing metathesis (RCM) and cross-metathesis (CM) reactions at high temperatures, where the more widely used phosphine-containing N-heterocyclic carbene-based ruthenium catalysts show side reactions. This discovery opens up a pathway to develop more selective ruthenium metathesis catalysts for reactions requiring harsh conditions.

Coordinating Additives as Activity Modulators in Diiodo Latent Olefin Metathesis Catalysts

AbstractThe ruthenium alkylidene catalyzed ring‐closing metathesis (RCM) of 5‐membered rings is an intramolecular reaction that is highly favored due to entropic and enthalpic contributions. Counterintuitively, by using trifluoromethyl sulfur‐chelated ruthenium benzylidene (Ru−SCF3−I), RCM of a diene with a hindered dimethyl terminus, diethyl 2‐allyl‐2‐(3‐methylbut‐2‐en‐1‐yl) malonate (S1), could be achieved at high concentrations but not at low concentrations. This finding led to the discovery that several additives, including ethyl acetate, significantly enhance the latent catalyst's activity. DFT computations and NMR control experiments suggest that additive coordination influences the catalytic cycle. Moreover, the “ethyl acetate effect” was studied in ring‐opening metathesis polymerizations (ROMP), providing a more efficient initiation when the reactions are run in environmentally friendly ethyl acetate as the solvent. The strong influence of simple coordinating additives (sometimes present in the substrate itself) on the activation of latent catalysts provides important insights into the reaction mechanism and opens a doorway towards improving the efficiency of these types of catalysts.

A tunable family of CAAC-ruthenium olefin metathesis catalysts modularly derived from a large-scale produced ibuprofen intermediate.

A series of tunable CAAC-based ruthenium benzylidene complexes with increased lipophilicity derived from a ketone being a large-scale produced key substrate for a popular nonsteroidal anti-inflammatory drug-ibuprofen was obtained and tested in various olefin metathesis transformations. As a group, these catalysts exhibited higher activity than their known analogues containing a smaller and less lipophilic phenyl substituent on the α-carbon atom, but in individual reactions, the size of the N-aryl moiety was revealed as a decisive factor. For example, in the cross-metathesis of methyl oleate with ethylene (ethenolysis)-a reaction with growing industrial potential-the best results were obtained when the N-aryl contained an isopropyl or tert-butyl substituent in the ortho position. At the same time, in the RCM, CM, and self-CM transformations involving larger olefinic substrates, the catalysts with smaller aryl-bearing CAAC ligands, where methyl and ethyl groups occupy ortho, ortho' positions performed better. This offers a great deal of tunability and allows for selection of the best catalyst for a given reaction while keeping the general structure (and manufacturing method) of the ibuprofen-intermediate derived CAAC ligand the same.

A Single Functionalization Agent for Heterotelechelic ROMP Polymers.

Heterotelechelic polymers are an important class of materials finding applications in bioconjugation, imaging, sensing, and synthesis of organic/inorganic hybrid systems with interesting features. However, the synthesis of such polymers is challenging. Here, we report a mechanistically unique and most efficient method based on a single functionalization agent to prepare heterotelechelic polymers by a ring-opening metathesis polymerization. Different functionalization agents can be synthesized in one simple step from inexpensive commercial starting materials. The functionalization agents initially generate a functional initiator from commercial Grubbs' first-generation ruthenium benzylidene catalyst. During this process, a functional dihydrofuran derivative is produced. After functional initiation and propagation of a suitable monomer, the dihydrofuran derivative functionally terminates the polymerization yielding a primary alcohol-terminated heterotelechelic polymer. Molecular weight control is achieved by varying the ratio between monomer and Grubbs' first-generation catalyst. This method may emerge as a popular choice to prepare heterotelechelic polymers due to its simplicity and efficiency.

Highly Substrate‐Selective Macrocyclic Ring Closing Metathesis

AbstractA selective ring‐closing metathesis (RCM) reaction for the formation of large macrocycles by using latent sulfur chelated ruthenium iodide benzylidenes, readily activated by thermal and photochemical (UV‐A and visible light) stimuli, is reported. For dienes having one terminal alkene and one internal double bond, the specific affinity of diiodo ruthenium alkylidenes for the unhindered terminus, combined with their reluctance to react with internal olefins, favors RCM over oligomerization, providing high macrocyclic yields even at relatively high concentrations. Alternatively, for substrates containing two internal double bonds, a sacrificial methylene donor can be used to obtain the desired products. With this methodology, lactones, lactams, and macrocyclic ketones ranging from 13‐ to 22‐membered rings could be synthesized in moderate to high yields. In addition, synthetic applications for a one‐pot cyclization/reduction sequence to produce Exaltolide, a natural macrolide (commercial musk), Dihydrocivetone, and other saturated macrocycles have been explored. Thus, we disclose herein an important advantage for diiodo ruthenium benzylidene catalysts over their less selective dichloro counterparts and provide a more profound understanding of the mechanisms that provide the enhanced cyclization outcome.magnified image

Synthesis and Catalytic Properties of a Very Latent Selenium-Chelated Ruthenium Benzylidene Olefin Metathesis Catalyst.

Herein, we describe a study of the synthesis, characterization, and catalytic properties of a cis-dichlorido seleno-chelated Hoveyda–Grubbs type complex (Ru8). Such a complex has been obtained through a straightforward and high-yielding synthetic protocol in three steps from the commercially available 2-bromobenzaldehyde in good overall yield (54%). The catalytic profile, especially the latency of this complex, has been probed through selected olefin metathesis reactions such as ring-closing metathesis (RCM), self-cross-metathesis (self-CM) and ring-opening metathesis polymerization (ROMP). In addition to its high latency, the selenium Hoveyda-type complex Ru8 exhibits a switchable behavior upon thermal activation. Of interest, while the corresponding sulfur-chelated Hoveyda type catalyst is reported to be only activated by heat, the selenium analogue was found to be active upon both heat and light irradiation.

Olefin Metathesis, p‐Cresol, and the Second Generation Grubbs Catalyst: Fitting the Pieces

Abstractp‐Cresol as additive to the Grubbs second generation catalyst (GII) allows the cross‐metathesis of acrylates with prop‐1‐en‐1‐ylbenzenes under conditions that only give the prop‐1‐en‐1‐ylbenzene self‐metathesis product in the absence of cresol. NMR and IR spectroscopy, MALDI‐TOF MS and XPS supported the formation of a ruthenium benzylidene with hydrogen bonds between p‐cresol and the chloride ligands of GII. XPS furthermore confirmed p‐cresol to increase the binding energies of the GII Ru 3d5/2, 3d3/2, 3p3/2 and 3p1/2 photoelectron lines, whereas 1H NMR spectroscopy indicated the carbene carbon and hydrogen to be shielded. It is thus postulated that p‐cresol allows for more facile interaction between electron‐deficient compounds and the ruthenium benzylidene by decreasing the electron density on the metal center and increasing the electron density on the carbene.

Reactivity and Selectivity in Ruthenium Sulfur‐Chelated Diiodo Catalysts

AbstractA trifluoromethyl sulfur‐chelated ruthenium benzylidene, Ru‐S‐CF3‐I, was synthesized and characterized. This latent precatalyst provides a distinct activity and selectivity profiles for olefin metathesis reactions depending on the substrate. For example, 1,3‐divinyl‐hexahydropentalene derivatives were efficiently obtained by ring‐opening metathesis (ROM) of dicyclopentadiene (DCPD). Ru‐S‐CF3‐I also presented a much more effective photoisomerization process from the inactive cis‐diiodo to the active trans‐diiodo configuration after exposure to 510 nm (green light), allowing for a wide scope of photoinduced olefin metathesis reactions. DFT calculations suggest a faster formation and enhanced stability of the active trans‐diiodo species of Ru‐S‐CF3‐I compared with Ru‐S‐Ph‐I, explaining its higher reactivity. In addition, the photochemical release of chloride anions by irradiation of Cl‐BODIPY in the presence of DCPD derivatives with diiodo Ru benzylidenes, led to in situ generation of chloride complexes, which quickly produced the corresponding cross‐linked polymers. Thus, novel selective pathways that use visible light to guide olefin metathesis based synthetic sequences is presented.

Reactivity and Selectivity in Ruthenium Sulfur-Chelated Diiodo Catalysts.

A trifluoromethyl sulfur-chelated ruthenium benzylidene, Ru-S-CF3 -I, was synthesized and characterized. This latent precatalyst provides a distinct activity and selectivity profiles for olefin metathesis reactions depending on the substrate. For example, 1,3-divinyl-hexahydropentalene derivatives were efficiently obtained by ring-opening metathesis (ROM) of dicyclopentadiene (DCPD). Ru-S-CF3 -I also presented a much more effective photoisomerization process from the inactive cis-diiodo to the active trans-diiodo configuration after exposure to 510 nm (green light), allowing for a wide scope of photoinduced olefin metathesis reactions. DFT calculations suggest a faster formation and enhanced stability of the active trans-diiodo species of Ru-S-CF3 -I compared with Ru-S-Ph-I, explaining its higher reactivity. In addition, the photochemical release of chloride anions by irradiation of Cl-BODIPY in the presence of DCPD derivatives with diiodo Ru benzylidenes, led to in situ generation of chloride complexes, which quickly produced the corresponding cross-linked polymers. Thus, novel selective pathways that use visible light to guide olefin metathesis based synthetic sequences is presented.

Light-Activated Olefin Metathesis: Catalyst Development, Synthesis, and Applications.

ConspectusThe most important means for tuning and improving a catalyst’s properties is the delicate exchange of the ligand shell around the central metal atom. Perhaps for no other organometallic-catalyzed reaction is this statement more valid than for ruthenium-based olefin metathesis. Indeed, even the simple exchange of an oxygen atom for a sulfur atom in a chelated ruthenium benzylidene about a decade ago resulted in the development of extremely stable, photoactive catalysts. This Account presents our perspective on the development of dormant olefin metathesis catalysts that can be activated by external stimuli and, more specifically, the use of light as an attractive inducing agent.The insight gained from a deeper understanding of the properties of cis-dichlororuthenium benzylidenes opened the doorway for the systematic development of new and efficient light-activated olefin metathesis catalysts and catalytic chromatic-orthogonal synthetic schemes. Following this, ways to disrupt the ligand-to-metal bond to accelerate the isomerization process that produced the active precatalyst were actively pursued. Thus, we summarize herein the original thermal activation experiments and how they brought about the discoveries of photoactivation in the sulfur-chelated benzylidene family of catalysts. The specific wavelengths of light that were used to dissociate the sulfur–ruthenium bond allowed us to develop noncommutative catalytic chromatic-orthogonal processes and to combine other photochemical reactions with photoinduced olefin metathesis, including using external light-absorbing molecules as “sunscreens” to achieve novel selectivities. Alteration of the ligand sphere, including modifications of the N-heterocyclic carbene (NHC) ligand and the introduction of cyclic alkyl amino carbene (CAAC) ligands, produced more efficient light-induced activity and special chemical selectivity. The use of electron-rich sulfoxides and, more prominently, phosphites as the agents that induce latency widened the spectrum of light-induced olefin metathesis reactions even further by expanding the colors of light that may now be used to activate the catalysts, which can be used in applications such as stereolithography and 3D printing of tough metathesis-derived polymers.

Imposing Latency in Ruthenium Sulfoxide-Chelated Benzylidenes: Expanding Opportunities for Thermal and Photoactivation in Olefin Metathesis

Herein we show the design and synthesis of an electron rich, sulfoxide-chelated, ruthenium benzylidene. In contrast to previously reported sulfoxide-chelated ruthenium benzylidenes, this complex is...

A Relay Strategy Actuates Pre-Existing Trisubstituted Olefins in Monoterpenoids for Cross-Metathesis with Trisubstituted Alkenes.

A retrosynthetic disconnection–reconnection analysis of epoxypolyenes—substrates that can undergo cyclization to podocarpane-type tricycles—reveals relay-actuated Δ6,7-functionalized monoterpenoid alcohols for ruthenium benzylidene catalyzed olefin cross-metathesis with homoprenyl benzenes. Successful implementation of this approach provided several epoxypolyenes as expected (E/Z, ca. 2–3:1). The method is further generalized for the cross-metathesis of pre-existing trisubstituted olefins in other relay-actuated Δ6,7-functionalized monoterpenoid alcohols with various other trisubstituted alkenes to form new trisubstituted olefins. Epoxypolyene cyclization of an enantiomerically pure, but geometrically impure, epoxypolyene substrate provides an enantiomerically pure, trans-fused, podocarpane-type tricycle (from the E-geometrical isomer).

Unprecedented Selectivity of Ruthenium Iodide Benzylidenes in Olefin Metathesis Reactions.

The development of selective olefin metathesis catalysts is crucial to achieving new synthetic pathways. Herein, we show that cis-diiodo/sulfur-chelated ruthenium benzylidenes do not react with strained cycloalkenes and internal olefins, but can effectively catalyze metathesis reactions of terminal dienes. Surprisingly, internal olefins may partake in olefin metathesis reactions once the ruthenium methylidene intermediate has been generated. This unexpected behavior allows the facile formation of strained cis-cyclooctene by the RCM reaction of 1,9-undecadiene. Moreover, cis-1,4-polybutadiene may be transformed into small cyclic molecules, including its smallest precursor, 1,5-cyclooctadiene, by the use of this novel sequence. Norbornenes, including the reactive dicyclopentadiene (DCPD), remain unscathed even in the presence of terminal olefin substrates as they are too bulky to approach the diiodo ruthenium methylidene. The experimental results are accompanied by thorough DFT calculations.

Unprecedented Selectivity of Ruthenium Iodide Benzylidenes in Olefin Metathesis Reactions

AbstractThe development of selective olefin metathesis catalysts is crucial to achieving new synthetic pathways. Herein, we show that cis‐diiodo/sulfur‐chelated ruthenium benzylidenes do not react with strained cycloalkenes and internal olefins, but can effectively catalyze metathesis reactions of terminal dienes. Surprisingly, internal olefins may partake in olefin metathesis reactions once the ruthenium methylidene intermediate has been generated. This unexpected behavior allows the facile formation of strained cis‐cyclooctene by the RCM reaction of 1,9‐undecadiene. Moreover, cis‐1,4‐polybutadiene may be transformed into small cyclic molecules, including its smallest precursor, 1,5‐cyclooctadiene, by the use of this novel sequence. Norbornenes, including the reactive dicyclopentadiene (DCPD), remain unscathed even in the presence of terminal olefin substrates as they are too bulky to approach the diiodo ruthenium methylidene. The experimental results are accompanied by thorough DFT calculations.

Latent Ruthenium Benzylidene Phosphite Complexes for Visible-Light-Induced Olefin Metathesis

Herein we report two ruthenium benzylidene complexes with benzylphosphite ligands for olefin metathesis. Unlike the previously reported benzylidene phosphite complexes, the benzylphosphite complexe...

Influence of Anionic Ligand Exchange in Latent Sulfur-Chelated Ruthenium Precatalysts.

Four new cis-dianionic S-chelated ruthenium benzylidenes were synthesized by chloride ligand exchange. The special cis-dianionic conformation of these complexes contributed to a particularly facile anion exchange process, producing room-temperature-latent precatalysts. Their catalytic activity was strongly influenced by the solvent used. The latent iodide complex very efficiently promoted ring-closing metathesis by heating in toluene. Conversely, carboxylate ligands produced quite poor catalysts, but could abstract chlorides from chlorinated solvents to transform into active precatalysts. In tetrahydrofuran (THF), the S-chelated dichloro complex was shown to promote cycloisomerization instead of metathesis; however, the metathesis activity in THF could be recovered in the presence of phenylacetylene as a cocatalyst. Under the same conditions, all the other complexes required addition of LiCl to mimic this dichotomous behavior.

Synthesis of poly(ethyl methacrylate-co-methyl methacrylate) obtained via ATRP using ruthenium benzylidene complexes

Abstract Atom-Transfer Radical Copolymerization (ATRP) of methyl methacrylate (MMA) and ethyl methacrylate (EMA) under different reaction conditions was conducted using Grubbs 1st ( 1) and 2nd (2) generation catalysts. Initially, the study focused on the reactivity of the catalysts in ATRP of EMA individually, then the syntheses of poly(MMA-co-EMA) were also conducted in different mixtures of monomers ([MMA]/[EMA] = 100/200 and [MMA]/[EMA] = 200/100). Conversion and semilogarithmic kinetic plots as a function of time were related to the different catalysts and reaction conditions. The values of Mn and PDI also changed when different catalysts were used in the presence of Al(OiPr)3, and more controlled polymerizations were achieved using 1. In the syntheses of poly(MMA)-co -(EMA), conversion of 60% was reached for both catalysts at different [MMA]/[EMA] ratios for 16 h; however, for shorter time, 4 h, better conversion values were obtained using 1 as catalyst for both [MMA]/[EMA] = 100/200 or 200/100.

New latent metathesis catalysts equipped with exchangeable boronic ester groups on the NHC

Latent metathesis catalysts equipped with boronate esters of diols as exchangeable end-groups on their NHC ligands and an S-chelated ruthenium-benzylidene core were synthesized. The stable S-chelated ruthenium complexes underwent hydrolysis under mild acidic conditions, allowing easy exchange of terminal units by several 1,2- and 1,3-diols, without degrading the central ruthenium benzylidene. Using this strategy, we also prepared metathesis catalysts equipped with diallyl substrates at the termini that showed concentration dependency on RCM reactions. Notably, the larger dendritic catalysts were more efficient at the more dilute condition.