Routing Protocol For Low-Power Research Articles

Real-Time Monitoring and Control with Wireless Sensor and Actuator Technology

This paper explores the implementation of a smart monitoring system within a wireless sensor network, with a particular emphasis on developing a robust routing framework using the Routing Protocol for Low-power and Lossy Networks (RPL). This protocol, is designed to address the unique challenges of low-power and lossy environments. Our approach involves using a streamlined version of the Representational State Transfer (REST) architecture, implemented through a binary web service. This setup minimizes overhead and maximizes efficiency, which is critical for resource-constrained networks. Additionally, we use a publish/subscribe model, where each node in the network makes its resources—such as environmental sensors—available to other nodes interested in them. This model enhances the flexibility and responsiveness of the network. A significant part of our research involves a detailed performance evaluation of RPL. We conducted a series of experiments to understand how various parameters of the RPL protocol affect its performance in a smart grid scenario. Our analysis looks at key metrics such as routing efficiency, energy consumption, and overall network reliability. Through these experiments, we aim to provide valuable insights into how different configurations of RPL can impact its effectiveness. Our findings are intended to guide the optimization of RPL for specific applications, offering practical recommendations for deploying smart monitoring systems in similar low-power, lossy environments. This research not only sheds light on RPL’s performance but also contributes to the advancement of more efficient and reliable wireless sensor networks for smart grids and other related applications.

FL-DSFA: Securing RPL-Based IoT Networks against Selective Forwarding Attacks Using Federated Learning.

The Internet of Things (IoT) is a significant technological advancement that allows for seamless device integration and data flow. The development of the IoT has led to the emergence of several solutions in various sectors. However, rapid popularization also has its challenges, and one of the most serious challenges is the security of the IoT. Security is a major concern, particularly routing attacks in the core network, which may cause severe damage due to information loss. Routing Protocol for Low-Power and Lossy Networks (RPL), a routing protocol used for IoT devices, is faced with selective forwarding attacks. In this paper, we present a federated learning-based detection technique for detecting selective forwarding attacks, termed FL-DSFA. A lightweight model involving the IoT Routing Attack Dataset (IRAD), which comprises Hello Flood (HF), Decreased Rank (DR), and Version Number (VN), is used in this technique to increase the detection efficiency. The attacks on IoT threaten the security of the IoT system since they mainly focus on essential elements of RPL. The components include control messages, routing topologies, repair procedures, and resources within sensor networks. Binary classification approaches have been used to assess the training efficiency of the proposed model. The training step includes the implementation of machine learning algorithms, including logistic regression (LR), K-nearest neighbors (KNN), support vector machine (SVM), and naive Bayes (NB). The comparative analysis illustrates that this study, with SVM and KNN classifiers, exhibits the highest accuracy during training and achieves the most efficient runtime performance. The proposed system demonstrates exceptional performance, achieving a prediction precision of 97.50%, an accuracy of 95%, a recall rate of 98.33%, and an F1 score of 97.01%. It outperforms the current leading research in this field, with its classification results, scalability, and enhanced privacy.

Securing IoT: Mitigating Sybil Flood Attacks with Bloom Filters and Hash Chains

In the evolving landscape of the Internet of Things (IoT), ensuring the security and integrity of data transmission remains a paramount challenge. Routing Protocol for Low-Power and Lossy Networks (RPL) is commonly utilized in IoT networks to facilitate efficient data routing. However, RPL networks are susceptible to various security threats, with Sybil and flood attacks being particularly detrimental. Sybil attacks involve malicious nodes generating multiple fake identities to disrupt network operations, while flood attacks overwhelm network resources by inundating them with excessive traffic. This paper proposes a novel mitigation strategy leveraging Bloom filters and hash chains to enhance the security of RPL-based IoT networks against sybil and flood attacks. Extensive simulation and performance analysis demonstrate that this solution significantly reduces the impact of sybil and flood attacks while maintaining a low power consumption profile and low computational overhead.

Improved Cell Allocation Strategies Using K-Means Clustering in Congested 6TiSCH Environments.

The 6TiSCH protocol (IEEE 802.15.4e) is crucial for the Industrial Internet of Things (IIoT), utilizing a time-slotted channel hopping (TSCH) mode based on node distribution. In this study, we propose an innovative cell allocation strategy based on node position clustering using the K-means algorithm, specifically designed to address congestion and optimize resource distribution in the 6TiSCH network. Our mechanism effectively groups nodes into clusters, allowing for dynamic adjustment of cell capacities in congested areas by analyzing traffic patterns and the spatial distribution of nodes. This clustering approach enhances the efficiency of slot frame utilization and minimizes communication delays by reducing interference and improving routing stability. The proposed strategy leverages the clustering results to improve cell usage efficiency and reduce communication latency between nodes. By tailoring cell allocation to the specific traffic needs of each cluster, we significantly reduce packet loss, manage congestion more effectively, and enhance data transmission reliability. We evaluated the clustering method using the K-means algorithm through experiments with the 6TiSCH simulator. Additionally, we considered using objective functions in Routing Protocol for Low-Power and Lossy Networks (RPL), such as OF0 and MRHOF, to assess clustering results and their impact on throughput and packet delivery. Our method resulted in significantly improved average performance metrics. Under the OF0 routing protocol, we achieved a 30.01% latency reduction, a 15.95% faster joining time, an 8% higher packet delivery ratio, and a 13.82% throughput increase. Similarly, we observed a 12.34% improvement in packet delivery ratio, 21.06% latency reduction, 12.68% faster joining time, and 25.97% higher throughput speed with the MRHOF routing protocol. These findings highlight the effectiveness of the improved cell allocation strategy in congested 6TiSCH environments, offering a better solution for enhancing network performance in IIoT applications.

RPL-based attack detection approaches in IoT networks: review and taxonomy

The Routing Protocol for Low-Power and Lossy Networks (RPL) plays a crucial role in the Internet of Things (IoT) and Wireless Sensor Networks. However, ensuring the RPL protocol’s security is paramount due to its susceptibility to various attacks. These attacks disrupt data transmission and can substantially damage network topology by depleting critical resources. This paper presents a comprehensive survey addressing several key components in response to this challenge. Firstly, it categorizes potential attacks targeting the RPL protocol based on their impact on network performance and explores effective mechanisms to secure the protocol against them. The study identifies the most destructive and problematic threats affecting RPL functionality. Furthermore, it provides valuable insights into the security challenges of the RPL protocol and discusses their real-world implications for deploying and maintaining IoT and sensor networks. To underscore the uniqueness of the survey, we offer a qualitative comparison with other surveys in the same field. While this study acknowledges certain limitations, such as intentionally focusing only on reviewing RPL-specific attacks, it is a valuable reference for future researchers seeking to comprehend and mitigate attacks targeting RPL. It also suggests areas for further research in this domain.

Enhancing IoT Routing Security and Efficiency: Towards AI-Enabled RPL Protocol

In the rapidly evolving landscape of the Internet of Things (IoT), the security and efficiency of network routing are paramount. The standard Routing Protocol for Low-Power and Lossy Networks (RPL) faces challenges in the form of various cyber-attacks, impacting its reliability and performance. To address this problem, we propose a Novel Algorithm for Network Traffic Analysis and Response (NANTAR), a novel algorithm that optimizes the security and efficiency of RPL routing using AI-based techniques. Through evaluation against traditional RPL, NANTAR has demonstrated remarkable improvements in key performance metrics: a 20% increase in throughput, latency reductions of 20-30%, and more efficient resource utilization. Notably, NANTAR maintains robust network performance with scaling, evidenced by 15-20% lower false positive and negative rates. The algorithm’s efficacy is further highlighted by its high detection rates in the face of diverse attacks and its power consumption efficiency, which is crucial for IoT devices. NANTAR’s adaptability and seamless integration across various IoT platforms affirm its potential as a solution for securing IoT ecosystems, with results indicating significant improvements in key operational metrics.

Q-RPL: Q-Learning-Based Routing Protocol for Advanced Metering Infrastructure in Smart Grids.

Efficient and reliable data routing is critical in Advanced Metering Infrastructure (AMI) within Smart Grids, dictating the overall network performance and resilience. This paper introduces Q-RPL, a novel Q-learning-based Routing Protocol designed to enhance routing decisions in AMI deployments based on wireless mesh technologies. Q-RPL leverages the principles of Reinforcement Learning (RL) to dynamically select optimal next-hop forwarding candidates, adapting to changing network conditions. The protocol operates on top of the standard IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL), integrating it with intelligent decision-making capabilities. Through extensive simulations carried out in real map scenarios, Q-RPL demonstrates a significant improvement in key performance metrics such as packet delivery ratio, end-to-end delay, and compliant factor compared to the standard RPL implementation and other benchmark algorithms found in the literature. The adaptability and robustness of Q-RPL mark a significant advancement in the evolution of routing protocols for Smart Grid AMI, promising enhanced efficiency and reliability for future intelligent energy systems. The findings of this study also underscore the potential of Reinforcement Learning to improve networking protocols.

RPL*: An Explainable AI-based routing protocol for Internet of Mobile Things

The Internet of Mobile Things (IoMT) is an emerging paradigm of Internet of Things (IoT) with special focus on enabling mobility to the ‘things’. Several IoMT applications such as group of robots or drones performing collaborative search and rescue operation, identification of mines, warehouse management, goods delivery, etc can be considered as examples of IoMT systems. In the applications mentioned above, the nodes may send the information in a multi-hop manner to the root or coordinator node which may be static or mobile. While the Routing Protocol for Low Power and Lossy Networks (RPL) is extensively utilized in static IoT networks, it encounters significant limitations in handling mobility and providing resilience against routing attacks in mobile IoT networks. In this work, we propose a modified RPL, RPL* which is robust to handling mobility in nodes and is resilient towards routing attacks. In RPL*, any deviation from the normal behaviors of the network are identified as anomalies using an unsupervised Explainable Artificial Intelligence (XAI) strategy. In RPL*, we propose a novel mobility detection mechanism that will identify the mobility in the network in an energy efficient manner without incurring additional communication overhead. To maintain the connectivity with parent node, we propose a novel proactive connectivity management mechanism in RPL* which will ensure a smooth transition from one parent to another if required, thus avoiding the network partitioning due to mobility. The performance analysis of the system has demonstrated an improvement in packet delivery ratio of the mobile nodes by 40% due to the proposed RPL* when compared to RPL. Also, the proposed XAI strategy provided an F1-score of over 95% for the detection of sink hole and black hole attacks in the tested IoMT network scenarios. It was observed that RPL* improves the performance of the IoMT network when compared to RPL. However it may be noted that the mechanisms introduced to support mobility does not lead to a drop in PDR or increase in control packet overhead for static networks. Hence, RPL* can be considered as an alternative to RPL for IoT as well as IoMT networks.

ITRPL: An intelligent and trusted RPL protocol based on Multi-Agent Reinforcement Learning

Routing Protocol for Low Power and Lossy Networks (RPL) is the de-facto routing standard in IoT networks. It enables nodes to collaborate and autonomously build ad-hoc networks modeled by tree-like destination-oriented direct acyclic graphs (DODAG). Despite its widespread usage in industry and healthcare domains, RPL is susceptible to insider attacks. Although the state-of-the-art RPL ensures that only authenticated nodes participate in DODAG, such hard security measures are still inadequate to prevent insider threats. This entails a need to integrate soft security mechanisms to support decision-making. This paper proposes iTRPL, an intelligent and behavior-based framework that incorporates trust to segregate honest and malicious nodes within a DODAG. It also leverages multi-agent reinforcement learning (MARL) to make autonomous decisions concerning the DODAG. The framework enables a parent node to compute the trust for its child and decide if the latter can join the DODAG. It tracks the behavior of the child node, updates the trust, computes the rewards (or penalties), and shares them with the root. The root aggregates the rewards/penalties of all nodes, computes the overall return, and decides via its ϵ-Greedy MARL module if the DODAG will be retained or modified for the future. A simulation-based performance evaluation demonstrates that iTRPL learns to make optimal decisions with time.

Al‐based energy aware parent selection mechanism to enhance security and energy efficiency for smart homes in Internet of Things

AbstractThe growing ubiquity of Internet of Things (IoT) devices within smart homes demands the use of advanced strategies in IoT implementation, with an emphasis on energy efficiency and security. The incorporation of Artificial Intelligence (AI) within the IoT framework improves the overall efficiency of the network. An inefficient mechanism of parent selection at the network layer of IoT causes energy drain in the nodes, particularly near the sink node. As a result, nodes die earlier, causing network holes that further increase the control message overhead as well as the energy consumption of the network, compromising network security. This research introduces an AI‐based approach to parent selection of the Routing Protocol for Low Power and Lossy networks (RPL) at the network layer of IoT to enhance security and energy efficiency. A novel objective function, named Energy and Parent Load Objective Function (EA‐EPL), is also proposed that considers the composite metrics, including energy and parent load. Extensive experiments are conducted to assess EA‐EPL against OF0 and MRHOF algorithms. Experimental results show that EA‐EPL outperformed these algorithms in improving energy efficiency, network stability, and packet delivery ratio. The results also demonstrate a significant enhancement in the overall efficiency of IoT networks and increased security in smart home environments.

Exploring and mitigating hybrid rank attack in RPL-based IoT networks

Abstract Despite the widespread adoption of the Routing Protocol for Low-power and Lossy Networks (RPL) in IoT environments, its inherent limitations in addressing security vulnerabilities have left IoT networks vulnerable to ongoing attacks. This paper introduces a novel intrusion detection system tailored specifically for IoT networks, with a focus on mitigating attacks at the network’s edge. The study presents the Hybrid Rank Attack (HRA), a sophisticated threat exploiting RPL vulnerabilities by alternately advertising decreased and increased rank values in control messages. Extensive experimentation evaluates the detrimental effects of HRA on critical network metrics including exchanged messages, energy consumption, PDR, latency, and memory footprint. Additionally, a lightweight and distributed countermeasure algorithm is proposed to effectively mitigate the impact of HRA. Simulation-based evaluations demonstrate significant reductions in control overhead (68.7%) and energy consumption (61.83%), with minimal additional RAM utilization (1.05%). This lightweight solution enhances the resilience of RPL-based IoT networks against HRA threats.

Advancing Healthcare Networks: Optimizing Multi-Objective RPL for Diverse Traffic in Low-Power, Lossy Environments

RPL: Powering modern healthcare IoT Networks. The Routing Protocol for Low Power and Lossy Networks(RPL) is a protocol specifically designed for routing in networks characterized by low power and lossy connections built on IPv6. It is specifically designed for the growing use of Instantaneous IoT (Internet of Things) applications. These networks cater to the specialized requirements of Low Power (resource-constrained) and Lossy Networks(unstable networks), also known as LLNs, where routing data smoothly and prioritizing traffic types are the significant challenges. Studies have shown that standard RPL, which makes use of a set of routing rules, struggles to provide the level of performance that many IoT applications in modern-day healthcare demand. This limits RPL’s potential in scenarios where we have a mix of data traffic, which is very common in healthcare settings. To handle the diverse data traffic found in healthcare settings, our method involves distributing several instances of RPL settings throughout the network. The main objective of this strategy is to improve the effectiveness of important and critical healthcare applications. We have developed and thoroughly tested our system using Contiki, which is an open-source IoT operating system. We have three instances in our MultiInstance RPL setup, each of which is intended to handle different kinds of network traffic and provide varying Quality of Service (QoS) measures. Different sets of Objective Function (OF) rules are used by each instance to decide which route is optimal for the data it processes. We have made use of OF0 (Objective Function 0) and MRHOF (Minimum Rank with Hysteresis Objective Function). We have rigorously tested our solution. Our focus has been on metrics like delay, average energy consumption and Packet Delivery Ratio (PDR). Compared to standard RPL, our approach improved packet delivery rates and significantly reduced delays for high priority data packets. This research shows how to better address the complex data traffic needs of real-time healthcare IoT networks.

An Intrusion Detection System against RPL-based Routing Attacks for IoT Networks

<span lang="EN-US">The significant improvement in the Internet, Internet of Things (IoT), communication, and cloud computing have created considerable challenges in providing security for data and devices. In IoT networks, “Routing Protocol for Low power and Lossy networks”- (RPL) is a communication protocol that enables devices to exchange information and communicate with limited resources like low processing capabilities, less memory and energy. Through the Internet, unauthorised users can access RPL-based IoT networks, making these networks susceptible to routing attacks. Therefore, it is crucial to design Intrusion Detection System-(IDS) to address attacks from IoT communication devices. In this paper, we have proposed GCNConv, a Graph Neural Network (GNN) method that allows capturing the edge and node features of a graph to identify routing attacks. The proposed system has experimented on the RADAR dataset and experimental findings proved that, our approach performs well compared to state-of-the-art method with reference to precision, F1-score, accuracy and recall.</span>

Design of a load balancing Objective Function for RPL

Routing protocols for Internet of Things (IoT) play a major role in the performance of the network. The standard Routing Protocol for Low-Power and Lossy Networks (RPL) suffers from a number of limitations including congestion of higher-level nodes and unbalanced topology. This paper proposes a novel Objective Function called Load Balanced Minimum Rank with Hysteresis Objective Function (LB_MRHOF), which assigns child nodes to the most suitable parent in the topology. The Objective Function utilizes a weight of the Expected Transmission Count (ETX) and number of children to calculate the Composite ETX and Number of Children (CENOC) which estimates the load on each node. The attained CENOC is used to select the optimum parent for each node in the topology, where nodes with high CENOC are avoided in the parent selection process. The proposed Objective Function has been evaluated under random and hierarchical network topologies. In addition, the evaluation has investigated the influence of the number of nodes by testing for small, medium and large-scale networks. Results have shown that the proposed Objective Function outperforms MRHOF, OF_FUZZY and OF-EC in terms of Packet Delivery Ratio (PDR) and reduces nodal hop-count under all tested scenarios, with no compromise in energy consumption. They have also revealed that the best performance achieved by LB_MRHOF is attained under large-scale networks. The resulting network topology which is formed by the proposed Objective Function has shown improved balance and more depth.

To Design a Routing Module for IoT Routing Protocols to Address Modification and Manipulation Attacks

Internet of Things devices have become increasingly prevalent in various domains, including smart homes, healthcare, transportation, and industrial automation. As the number of IoT devices continues to grow, so does the potential for security challenges. Routing protocols play a critical role in IoT networks by determining the path for packet transmission. However, their susceptibility to modification and manipulation attacks can have far-reaching consequences. These attacks can lead to unauthorized access to sensitive data, disruption of critical services, and even physical harm in certain applications such as healthcare and industrial automation. This paper presents the design and implementation of a security-enhanced routing module aimed at protecting Internet of Things networks from modification and manipulation attacks, particularly focusing on the challenges within the IPv6 Routing Protocol for Low-Power and Lossy Networks. Acknowledging the increasing pervasiveness of IoT devices and their susceptibility to routing disruptions, this work contributes a novel approach to augment RPL's Lamport’s Keyed Hash Chain scheme security posture without impinging on the protocol's inherent resource-efficiency. Through a comprehensive simulation-based system verification process, the module demonstrates its effectiveness in mitigating common routing attacks, its adaptability in dynamic network conditions, and its fidelity to established RPL performance metrics

Trust-Based Optimized Reporting for Detection and Prevention of Black Hole Attacks in Low-Power and Lossy Green IoT Networks.

The Internet of Things (IoT) is empowering various sectors and aspects of daily life. Green IoT systems typically involve Low-Power and Lossy Networks (LLNs) with resource-constrained nodes. Lightweight routing protocols, such as the Routing Protocol for Low-Power and Lossy Networks (RPL), are increasingly being applied for efficient communication in LLNs. However, RPL is susceptible to various attacks, such as the black hole attack, which compromises network security. The existing black hole attack detection methods in Green IoT rely on static thresholds and unreliable metrics to compute trust scores. This results in increasing false positive rates, especially in resource-constrained IoT environments. To overcome these limitations, we propose a delta-threshold-based trust model called the Optimized Reporting Module (ORM) to mitigate black hole attacks in Green IoT systems. The proposed scheme comprises both direct trust and indirect trust and utilizes a forgetting curve. Direct trust is derived from performance metrics, including honesty, dishonesty, energy, and unselfishness. Indirect trust requires the use of similarity. The forgetting curve provides a mechanism to consider the most significant and recent feedback from direct and indirect trust. To assess the efficacy of the proposed scheme, we compare it with the well-known trust-based attack detection scheme. Simulation results demonstrate that the proposed scheme has a higher detection rate and low false positive alarms compared to the existing scheme, confirming the applicability of the proposed scheme in green IoT systems.

Towards an IoT based secured framework for smart cities

<p>Cities are evolving into smart urban environments, where various devices, technologies, services, connections, blocks, and storage systems are transforming to embrace smart solutions, departing from traditional counterparts. This intricate network of interconnected devices collectively constitutes the Internet of Things (IoT), promising users a life of enhanced convenience. However, this transformation also introduces challenges, particularly in managing loosely linked devices and transmitting information across networks. This study conducts a comprehensive review of the various components contributing to the formation of a smart city, scrutinizing the challenges and factors that influence them. The overarching objective is to identify specific areas within smart cities grappling with cybersecurity challenges and ascertain the relative significance of each area. Data for this research is gathered through questionnaires, expert opinions, and paired comparisons drawn from previous studies, and employs the Fuzzy Analytic Hierarchy Process approach to determine the weight of each factor and sub-factor, subsequently ranking them. Among the nine identified factors, the "Smart Security" factor is the most critical, with a weight of 0.198, signifying its paramount importance. To overcome the security challenges in smart cities, we introduce an advanced secure framework (ARPL) for detecting security threats, using the Routing Protocol for Low Power and Lossy Networks (RPL) as its foundation. The advanced framework is adept at identifying a variety of attacks. Performance assessments of the proposed framework encompass several key parameters, such as ADA, TPR, FPR, and end-to-end delay. The positive outcomes observed strongly endorse the effectiveness of the proposed framework, positioning it as an optimal solution for RPL-based smart environments.</p>

RT-Ranked: Towards Network Resiliency by Anticipating Demand in TSCH/RPL Communication Environments

Time-slotted Channel Hopping (TSCH) Media Access Control (MAC) was specified to target the Industrial Internet of Things needs. This MAC balances energy, bandwidth, and latency for deterministic communications in unreliable wireless environments. Building a distributed or autonomous TSCH schedule is arduous because the node negotiates cells with its neighbours based on queue occupancy, latency, and consumption metrics. The Minimal TSCH Configuration defined by RFC 8180 was specified for bootstrapping a 6TiSCH network and detailed configurations necessary to be supported. In particular, it adopts Routing Protocol for Low Power and Lossy networks (RPL) Non-Storing mode, which reduces the node’s network awareness. Dealing with unpredicted traffic far from the forwarding node is difficult due to limited network information. Anticipating this unexpected flow from multiple network regions is essential because it can turn the forwarding node into a network bottleneck leading to high latency, packet discard or disconnection rates, forcing RPL to change the topology. To cope with that, this work proposes a new mechanism that implements an RPL control message option for passing forward the node’s cell demand, allowing the node to anticipate the proper cell allocation for supporting the traffic originating by nodes far from the forwarding point embedded in Destination-Oriented Directed Acyclic Graph (DODAG) Information Object (DIO) and Destination Advertisement Object (DAO) RPL control messages. Implementing this mechanism in a distributed TSCH Scheduling developed in Contiki-NG yielded promising results in supporting unforeseen traffic bursts and has the potential to significantly improve the performance and reliability of TSCH schedules in challenging network environments.

An efficient secure and energy resilient trust-based system for detection and mitigation of sybil attack detection (SAN).

In the modern digital market flooded by nearly endless cyber-security hazards, sophisticated IDS (intrusion detection systems) can become invaluable in defending against intricate security threats. Sybil-Free Metric-based routing protocol for low power and lossy network (RPL) Trustworthiness Scheme (SF-MRTS) captures the nature of the biggest threat to the routing protocol for low-power and lossy networks under the RPL module, known as the Sybil attack. Sybil attacks build a significant security challenge for RPL networks where an attacker can distort at least two hop paths and disrupt network processes. Using such a new way of calculating node reliability, we introduce a cutting-edge approach, evaluating parameters beyond routing metrics like energy conservation and actuality. SF-MRTS works precisely towards achieving a trusted network by introducing such trust metrics on secure paths. Therefore, this may be considered more likely to withstand the attacks because of these security improvements. The simulation function of SF-MRTS clearly shows its concordance with the security risk management features, which are also necessary for the network's performance and stability maintenance. These mechanisms are based on the principles of game theory, and they allocate attractions to the nodes that cooperate while imposing penalties on the nodes that do not. This will be the way to avoid damage to the network, and it will lead to collaboration between the nodes. SF-MRTS is a security technology for emerging industrial Internet of Things (IoT) network attacks. It effectively guaranteed reliability and improved the networks' resilience in different scenarios.

Machine learning for QoS and security enhancement of RPL in IoT-Enabled wireless sensors

Internet of Things (IoT) networks rely on wireless sensors for data collection and transmission, making them vulnerable to security threats that undermine their Quality of Service (QoS). The Routing Protocol for Low-Power and Lossy Networks (RPL) is crucial for efficient data transmission in IoT networks, but its performance can be significantly degraded by attacks such as Rank, Sinkhole and Wormhole attacks. These threats disrupt network integrity by manipulating routing information, attracting traffic through malicious nodes and tunneling data to malicious endpoints. This paper presents a novel machine learning-based framework to enhance RPL's security and QoS. Our approach integrates a random forest model for precise traffic classification, a reinforcement learning module for dynamic and adaptive routing, and a modified RPL objective function that incorporates classification outcomes into routing decisions. Simulations demonstrate that our framework significantly improves network throughput, reduces latency, and enhances packet delivery ratios while maintaining low jitter. Furthermore, it achieves a high detection rate, minimal false positives, and swift response to security incidents, thereby robustly securing the RPL protocol and enhancing QoS in IoT-enabled wireless sensor networks. The findings of this research offer substantial contributions to the field, providing a comprehensive solution to strengthen RPL against prevalent security threats.