Rotavirus Vaccine Candidates Research Articles

Evaluating the Compatibility of Three Aluminum Salt-Adjuvanted Recombinant Protein Antigens (Trivalent NRRV) Combined with a Mock Trivalent Sabin-IPV Vaccine: Analytical and Formulation Challenges.

In this work, we describe compatibility assessments of a recombinant, trivalent non-replicating rotavirus vaccine (t-NRRV) candidate with a mock trivalent Sabin inactivated polio vaccine (t-sIPV). Both t-sIPV and t-NRRV are incompatible with thimerosal (TH), a preservative commonly used in pediatric pentavalent combination vaccines (DTwP-Hib-HepB) distributed in low- and middle-income countries (LMICs), preventing the development of a heptavalent combination. The compatibility of t-NRRV with a mock DTwP-Hib-HepB formulation is described in a companion paper. This case study highlights the analytical and formulation challenges encountered when combining a mock t-sIPV vaccine (unadjuvanted) with Alhydrogel® (AH) adjuvanted t-NRRV. Selective and stability-indicating competition ELISAs were implemented to monitor antibody binding to each of the six antigens (±AH). Simple mixing caused the undesired desorption of t-NRRV from AH with the concomitant binding of t-sIPV to AH. Although the former effect was mitigated by dialyzing sIPV bulks, decreased sIPV storage stability was observed at accelerated temperatures in the bivalent combination with a rank-ordering of P[8] > P[6] > P[4] and sIPV3 > sIPV2 > sIPV1. The compatibility of AH-adsorbed t-sIPV with alternative preservatives was evaluated, and parabens (methyl, propyl) were identified for potential use in this multi-dose bivalent formulation. Along with a companion paper, the lessons learned are discussed to facilitate the future formulation development of pediatric combination vaccines with new antigens.

Wa-VP4* as a candidate rotavirus vaccine induced homologous and heterologous virus neutralizing antibody responses in mice, pigs, and cynomolgus monkeys

Group A rotavirus (RVA) is the primary etiological agent of acute gastroenteritis (AGE) in children under 5 years of age. Despite the global implementation of vaccines, rotavirus infections continue to cause over 120,000 deaths annually, with a majority occurring in developing nations. Among infants, the P[8] rotavirus strain is the most prevalent and can be categorized into four distinct lineages. In this investigation, we expressed five VP4(aa26-476) proteins from different P[8] lineages of human rotavirus in E. coli and assessed their immunogenicity in rabbits. Among the different P[8] strains, the Wa-VP4 protein, derived from the MT025868.1 strain of the P[8]-1 lineage, exhibited successful purification in a highly homogeneous form and significantly elicited higher levels of neutralizing antibodies (nAbs) against both homologous and heterologous rotaviruses compared to other VP4 proteins derived from different P[8] lineages in rabbits. Furthermore, we assessed the immunogenicity of the Wa-VP4 protein in mice, pigs, and cynomolgus monkeys, observing that it induced robust production of nAbs in all animals. Interestingly, there was no significant difference between in nAb titers against homologous and heterologous rotaviruses in pigs and mankeys. Collectively, these findings suggest that the Wa-VP4* protein may serve as a potential candidate for a rotavirus vaccine.

A Viral Protein 4-Based Trivalent Nanoparticle Vaccine Elicited High and Broad Immune Responses and Protective Immunity against the Predominant Rotaviruses.

The current live rotavirus (RV) vaccines show reduced effectiveness in developing countries, calling for vaccine strategies with improved efficacy and safety. We generated pseudovirus nanoparticles (PVNPs) that display multiple ectodomains of RV viral protein 4 (VP4), named S-VP4e, as a nonreplicating RV vaccine candidate. The RV spike protein VP4s that bind host receptors and facilitate viral entry are excellent targets for vaccination. In this study, we developed scalable methods to produce three S-VP4e PVNPs, each displaying the VP4e antigens from one of the three predominant P[8], P[4], and P[6] human RVs (HRVs). These PVNPs were recognized by selected neutralizing VP4-specific monoclonal antibodies, bound glycan receptors, attached to permissive HT-29 cells, and underwent cleavage by trypsin between VP8* and VP5*. 3D PVNP models were constructed to understand their structural features. A trivalent PVNP vaccine containing the three S-VP4e PVNPs elicited high and well-balanced VP4e-specific antibody titers in mice directed against the three predominant HRV P types. The resulting antisera neutralized the three HRV prototypes at high titers; greater than 4-fold higher than the neutralizing responses induced by a trivalent vaccine consisting of the S60-VP8* PVNPs. Finally, the trivalent S-VP4e PVNP vaccine provided 90-100% protection against diarrhea caused by HRV challenge. Our data supports the trivalent S-VP4e PVNPs as a promising nonreplicating HRV vaccine candidate for parenteral delivery to circumvent the suboptimal immunization issues of all present live HRV vaccines. The established PVNP-permissive cell and PVNP-glycan binding assays will be instrumental for further investigating HRV-host cell interactions and neutralizing effects of VP4-specific antibodies and antivirals.

MRNA-based VP8* nanoparticle vaccines against rotavirus are highly immunogenic in rodents

Despite the availability of live-attenuated oral vaccines, rotavirus remains a major cause of severe childhood diarrhea worldwide. Due to the growing demand for parenteral rotavirus vaccines, we developed mRNA-based vaccine candidates targeting the viral spike protein VP8*. Our monomeric P2 (universal T cell epitope)-VP8* mRNA design is equivalent to a protein vaccine currently in clinical development, while LS (lumazine synthase)-P2-VP8* was designed to form nanoparticles. Cyro-electron microscopy and western blotting-based data presented here suggest that proteins derived from LS-P2-VP8* mRNA are secreted in vitro and self-assemble into 60-mer nanoparticles displaying VP8*. mRNA encoded VP8* was immunogenic in rodents and introduced both humoral and cellular responses. LS-P2-VP8* induced superior humoral responses to P2-VP8* in guinea pigs, both as monovalent and trivalent vaccines, with encouraging responses detected against the most prevalent P genotypes. Overall, our data provide evidence that trivalent LS-P2-VP8* represents a promising mRNA-based next-generation rotavirus vaccine candidate.

Characterization and immunogenicity of a novel chimeric hepatitis B core-virus like particles (cVLPs) carrying rotavirus VP8*protein in mice model

Given the efficacy and safety issues of the WHO for approved/prequalified live attenuated rotavirus (RV) vaccines, studies on alternative non-replicating modals and proper RV antigens are actively undertaken. Herein, we report the novel chimeric hepatitis B core-virus like particles (VLPs) carrying RV VP8*26-231 protein of a P [8] strain (cVLPVP8*), as a parenteral VLP RV vaccine candidate. SDS-PAGE and Western blotting analyses indicated the expected size of the E. coli-derived HBc-VP8* protein that self-assembled to cVLPVP8* particles. Immunization in mice indicated development of higher levels of IgG and IgA as well as higher IgG1/IgG2a ratios by cVLPVP8* vaccination compared to the VP8* alone. Assessment of neutralizing antibodies (nAbs) indicated development of heterotypic nAbs with cross-reactivity to a heterotypic RV strain by cVLPVP8* immunization compared to VP8* alone. The observed anti-VP8* cross-reactivity might indicate the possibility of developing a Pan-genomic RVA vaccine based on the cVLPVP8* formulation that deserves further challenge studies.

Comparison of IgA Antibody Titer Induced by Human-Bovine Rotavirus Candidate Vaccine with Bovine Rotavirus and Rotarix.

Rotavirus (RV) is the most common cause of acute gastroenteritis in early childhood worldwide. Gastroenteritis is a preventable disease by the vaccine, and vigorous efforts were made to produce attenuated oral rotavirus vaccines. In recent years, despite the existence of three types of live attenuated rotavirus vaccines, several countries, such as China and Vietnam, have intended to produce indigenous vaccines based on rotavirus serotypes circulating among their population. In this study, the immunogenicity of homemade human-bovine reassortant RV candidate vaccine was tested in an animal model. Rabbits were randomly distributed into eight experimental groups with three animals per group. Afterward, three rabbits in each test group designated as P1, P2, and P3 were experimentally inoculated with the 106, 107, and 108 tissue culture infectious dose 50 (TCID50) of the reassortant virus, respectively. The N1 group received the reassortant rotavirus vaccine containing 107 TCID50+zinc. The N2, N3, and N4 groups received rotavirus vaccine strain, RV4 human rotavirus, and bovine rotavirus strain, respectively, and the control group received phosphate-bufferedsaline. It is noteworthy that three rabbits have been included in each group. The IgA total antibody titer was measured and evaluated by non-parametric Mann-Whitney and Kruskal-Wallis tests. The antibody titer produced in the studied groups did not significantly differ. The candidate vaccine showed immunogenicity, protectivity, stability, and safety. The findings of this study indicated a critical role of IgA production, which can induce immunity against a gastroenteritis viral pathogen. Regardless of purification, candidate reassortant vaccine and cell adapted animal strains could be used as a vaccine candidate for production.

Bivalent rotavirus VP4∗ stimulates protective antibodies against common genotypes of human rotaviruses

SummaryNon-replicating rotavirus vaccines are an alternative strategy to improve the efficacy and safety of rotavirus vaccines. The spike protein VP4, which could be enzymatically cleaved into VP8∗ and VP5∗, is an ideal target for the development of recombinant rotavirus vaccine. In our previous studies, we demonstrated that the truncated VP4 (aa26-476, VP4∗) could be a more viable vaccine candidate compared to VP8∗ and VP5∗. Here, to develop a human rotavirus vaccine, the VP4∗ proteins of P[4], P[6], and P[8] genotype rotaviruses were expressed. All VP4∗ proteins can stimulate high levels of neutralizing antibodies in both guinea pigs and rabbits when formulated in aluminum adjuvant. Furthermore, bivalent VP4∗-based vaccine (P[8] + P[6]-VP4∗) can stimulate high levels of neutralizing antibodies against various genotypes of rotavirus with no significant difference as compared to the trivalent vaccines. Therefore, bivalent VP4∗ has the potential to be a viable rotavirus vaccine candidate for further development.

Concordance of in vitro and in vivo measures of non-replicating rotavirus vaccine potency

Rotavirus infections remain a leading cause of morbidity and mortality among infants residing in low- and middle-income countries. To address the large need for protection from this vaccine-preventable disease we are developing a trivalent subunit rotavirus vaccine which is currently being evaluated in a multinational Phase 3 clinical trial for prevention of serious rotavirus gastroenteritis. Currently, there are no universally accepted in vivo or in vitro models that allow for correlation of field efficacy to an immune response against serious rotavirus gastroenteritis. As a new generation of non-replicating rotavirus vaccines are developed the lack of an established model for evaluating vaccine efficacy becomes a critical issue related to how vaccine potency and stability can be assessed. Our previous publication described the development of an in vitro ELISA to quantify individual vaccine antigens adsorbed to an aluminum hydroxide adjuvant to address the gap in vaccine potency methods for this non-replicating rotavirus vaccine candidate. In the present study, we report on concordance between ELISA readouts and in vivo immunogenicity in a guinea pig model as it relates to vaccine dosing levels and sensitivity to thermal stress. We found correlation between in vitro ELISA values and neutralizing antibody responses engendered after animal immunization. Furthermore, this in vitro assay could be used to demonstrate the effect of thermal stress on vaccine potency, and such results could be correlated with physicochemical analysis of the recombinant protein antigens. This work demonstrates the suitability of the in vitro ELISA to measure vaccine potency and the correlation of these measurements to an immunologic outcome.

Potential impact and cost-effectiveness of injectable next-generation rotavirus vaccines in 137 LMICs: a modelling study

ABSTRACT While current live, oral rotavirus vaccines (LORVs) are reducing severe diarrhea everywhere, their effectiveness is lower in high burden settings. Alternative approaches are in advanced stages of clinical development, including injectable next-generation rotavirus vaccine (iNGRV) candidates, which have the potential to better protect children, be combined with existing routine immunizations and be more affordable than current LORVs. In an effort to better understand the real public health value of iNGRVs and to help inform decisions by international agencies, funders, and vaccine manufacturers, we conducted an impact and cost-effectiveness analysis examining 20 rotavirus vaccine use cases. We evaluated several currently licensed LORVs, one neonatal oral NGRV (oNGRV), one iNGRV, and one iNGRV-DTP (iNGRV comprising part of a DTP-containing combination) over a ten-year timeframe in 137 low- and middle-income countries. The most promising use case identified was a high efficacy iNGRV-DTP, predicted to have the lowest vaccine program cost (US$1.4 billion), the highest vaccine benefit (750,000 rotavirus deaths averted, 13 million rotavirus hospital admissions averted, US$ 2.7 billion health-care cost averted), and most favorable cost-effectiveness (cost-saving). iNGRV-DTP vaccine remained the most affordable, safe, and cost-effective option even when it was assumed to have equivalent efficacy to the current LORVs. This study shows that while the development of iNGRVs with superior efficacy to currently licensed LORVs would be ideal, iNGRVs with similar efficacy to LORVs would offer substantial public health value. It also highlights the economic value of accelerating the development of DTP-based combination vaccines that include iNGRV to provide rotavirus protection.

Modeling the long-term 2-8 °C stability profiles of a live, rotavirus vaccine candidate (RV3-BB) in various liquid formulations via extrapolations of real-time and accelerated stability data

To accelerate the formulation development of live-virus vaccine (LVV) candidates, more rapid approaches to rank-order formulations and estimate their real-time storage stability losses are needed. In this case-study, we utilize new and previously described stability data of a live, rotavirus vaccine candidate (RV3-BB) in three different liquid formulations to model and compare predicted vs. experimental RV3-BB stability profiles. Linear-regression extrapolations of limited real-time (2-8 °C) stability data and Arrhenius modeling of accelerated (15, 25, 37 °C) stability data provided predictions of RV3-BB real-time stability profiles (2-8 °C, 24 months). Good correlations of modeled versus experimental stability data to rank-order the RV3-BB formulations were achieved by employing (1) a high-throughput RT-qPCR assay to measure viral titers, (2) additional assay replicates and stability time-points, and (3) a −80 °C control for each formulation to benchmark results at each stability time-point and temperature. Instead of accumulating two-year, 2–8 °C storage stability data, the same rank-ordering of the three RV3-BB formulations could have been achieved by modeling 37°, 25°, 15° (and 2–8 °C) stability data over 1, 3 and 12 months, respectively. The results of this case-study are discussed in the context of accelerating LVV formulation development by expeditiously identifying stable formulations, estimating their shelf-lives, and determining vaccine vial monitoring (VVM) designations.

National stakeholder preferences for next-generation rotavirus vaccines: Results from a six-country study

BackgroundCurrently available live, oral rotavirus vaccines (LORVs) have significantly reduced severe rotavirus hospitalizations and deaths worldwide. However, LORVs are not as effective in low- and middle-income countries (LMIC) where rotavirus disease burden is highest. Next-generation rotavirus vaccine (NGRV) candidates in development may have a greater public health impact where they are needed most. The feasibility and acceptability of possible new rotavirus vaccines were explored as part of a larger public health value proposition for injectable NGRVs in LMICs. ObjectiveTo assess national stakeholder preferences for currently available LORVs and hypothetical NGRVs and understand rationales and drivers for stated preferences. MethodsInterviews were conducted with 71 national stakeholders who influence vaccine policy and national programming. Stakeholders from Ghana, Kenya, Malawi, Peru, Senegal, and Sri Lanka were interviewed using a mixed-method guide. Vaccine preferences were elicited on seven vaccine comparisons involving LORVs and hypothetical NGRVs based on information presented comparing the vaccines’ attributes. Reasons for vaccine preference were elicited in open-ended questions, and the qualitative data were analyzed on key preference drivers. ResultsNearly half of the national stakeholders interviewed preferred a highly effective standalone, injectable NGRV over current LORVs. When presented as having similar efficacy to the LORV, however, very few stakeholders preferred the injectable NGRV, even at substantially lower cost. Similarly, a highly effective standalone injectable NGRV was generally not favored over an equally effective oral NGRV following a neonatal-infant schedule, despite higher cost of the neonatal option. An NGRV-DTP-containing combination vaccine was strongly preferred over all other options, whether delivered alone with efficacy similar to current LORVs or co-administered alongside an LORV (LORV + NGRV-DTP) to increase efficacy. ConclusionResults from these national stakeholder interviews provide valuable insights to inform ongoing and future NGRV research and development.

Study of immunogenicity and safety of a candidate rotavirus vaccine based on a recombinant hybrid protein

BACKGROUND: Rotaviruses are the main cause of acute gastroenteritis in children in both developed and developing countries. Vaccination is the only way to prevent severe and fatal course of this disease. Live attenuated viruses-based vaccines currently available can have a number of side effects. A candidate rotavirus vaccine reported is based on a hybrid recombinant protein FliCVP6VP8, which includes a VP6 protein fragment, a rotavirus A VP8 protein fragment, and S. typhimurium FliC flagellin components. AIM: The aim was to evaluate the immunogenicity and safety of а preparation Rotavirus vaccine, recombinant in preclinical studies. MATERIALS AND METHODS: The immunogenicity of vaccine (blood antibody titers, antigen-specific proliferative response of spleen cells) was evaluated in BALB/c mice. The acute and subchronic toxicity, the possible irritating effect, pyrogenicity and the anaphylactic effect and delayed type hypersensitivity were evaluated in laboratory mice, rats, Guinea pigs, and rabbits. RESULTS: Double immunization of mice with the candidate vaccine demonstrated a significant increase in antibody titers in mouse sera compared to that in control mice. Evaluation of antigen-specific proliferative response after double immunization with a candidate vaccine demonstrated a significant increase in the values of stimulated proliferation. Evaluation of safety through acute and chronic toxicity studies demonstrated no toxicity. The immunostimulatory effect of vaccine was demonstrated when evaluating the number of antibody-producing cells with sheep red blood cells as antigens. The number of white blood cells was demonstrated to increase after the prolonged vaccine administration. CONCLUSIONS: The preclinical studies have demonstrated safety of the candidate rotavirus vaccine and its capability to produce the immune response.

Perspectives for the optimization and utility of the rotavirus reverse genetics system

Following Kobayashi and colleagues’ seminal paper in 20171, in the past four years the rotavirus (RV) field has witnessed a burst in research and publications based on the use of a fully plasmid-based RV reverse genetics systems and subsequent modifications2,3. However, in most cases, the rotaviral strain under interrogation has been the prototypic simian RV SA11-L2 strain (G3P[2]). Of note, a variety of other weakly-to-modestly replication-competent animal and human RV strains, bioluminescent and fluorescent reporter viruses, and clinical isolates of human RVs have proved hard or impossible to rescue using the original reverse genetics system2,4, highlighting a critical need to further enhance the recovery efficiency and expand the rescue tool kit. A number of further modifications of the initial reverse genetics system have enabled the rescue of other RV strains such as the human RV KU and CDC-9 strains, and a murine RV D6/2-like strain4,5. Here, we discuss future possible modifications of existing RV reverse genetics systems to further increase efficiency based on past experience with the improvement of influenza A virus recovery. The development of RV to accommodate the insertion and expression of heterologous sequences has substantial potential in the design of next-generation RV vaccine candidates and enteric viral vectors.

Molecular engineering improves antigen quality and enables integrated manufacturing of a trivalent subunit vaccine candidate for rotavirus

BackgroundVaccines comprising recombinant subunit proteins are well-suited to low-cost and high-volume production for global use. The design of manufacturing processes to produce subunit vaccines depends, however, on the inherent biophysical traits presented by an individual antigen of interest. New candidate antigens typically require developing custom processes for each one and may require unique steps to ensure sufficient yields without product-related variants.ResultsWe describe a holistic approach for the molecular design of recombinant protein antigens—considering both their manufacturability and antigenicity—informed by bioinformatic analyses such as RNA-seq, ribosome profiling, and sequence-based prediction tools. We demonstrate this approach by engineering the product sequences of a trivalent non-replicating rotavirus vaccine (NRRV) candidate to improve titers and mitigate product variants caused by N-terminal truncation, hypermannosylation, and aggregation. The three engineered NRRV antigens retained their original antigenicity and immunogenicity, while their improved manufacturability enabled concomitant production and purification of all three serotypes in a single, end-to-end perfusion-based process using the biotechnical yeast Komagataella phaffii.ConclusionsThis study demonstrates that molecular engineering of subunit antigens using advanced genomic methods can facilitate their manufacturing in continuous production. Such capabilities have potential to lower the cost and volumetric requirements in manufacturing vaccines based on recombinant protein subunits.

Formulation development of a live attenuated human rotavirus (RV3-BB) vaccine candidate for use in low- and middle-income countries

ABSTRACT Formulation development was performed with the live, attenuated, human neonatal rotavirus vaccine candidate (RV3-BB) with three main objectives to facilitate use in low- and middle- income countries including (1) a liquid, 2–8°C stable vaccine, (2) no necessity for pre-neutralization of gastric acid prior to oral administration of a small-volume dose, and (3) a low-cost vaccine dosage form. Implementation of a high-throughput RT-qPCR viral infectivity assay for RV3-BB, which correlated well with traditional FFA assays in terms of monitoring RV3-BB stability profiles, enabled more rapid and comprehensive formulation development studies. A wide variety of different classes and types of pharmaceutical excipients were screened for their ability to stabilize RV3-BB during exposure to elevated temperatures, freeze-thaw and agitation stresses. Sucrose (50–60% w/v), PEG-3350, and a solution pH of 7.8 were selected as promising stabilizers. Using a combination of an in vitro gastric digestion model (to mimic oral delivery conditions) and accelerated storage stability studies, several buffering agents (e.g., succinate, adipate and acetate at ~200 to 400 mM) were shown to protect RV3-BB under acidic conditions, and at the same time, minimize virus destabilization during storage. Several optimized RV3-BB candidate formulations were identified based on negligible viral infectivity losses during storage at 2–8°C and −20°C for up to 12 months, as well as by relative stability comparisons at 15°C and 25°C (up to 12 and 3 months, respectively). These RV3-BB stability results are discussed in the context of stability profiles of other rotavirus serotypes as well as future RV3-BB formulation development activities.

Crystallization of a nonreplicating rotavirus vaccine candidate.

Nonreplicating rotavirus vaccine (NRRV) candidates are being developed with the aim of serving the needs of developing countries. A significant proportion of the cost of manufacturing such vaccines is the purification in multiple chromatography steps. Crystallization has the potential to reduce purification costs and provide new product storage modality, improved operational flexibility, and reduced facility footprints. This communication describes a systematic approach for the design of the crystallization of an NRRV candidate, VP8 subunit proteins fused to the P2 epitope of tetanus toxin, using first‐principles models and preliminary experimental data. The first‐principles models are applied to literature data to obtain feasible crystallization conditions and lower bounds for nucleation and growth rates. Crystallization is then performed in a hanging‐drop vapor diffusion system, resulting in the nucleation and growth of NRRV crystals. The crystals obtained in a scaled‐up evaporative crystallization contain proteins truncated in the P2 region, but have no significant differences with the original samples in terms of antibody binding and overall conformational stability. These results demonstrate the promise of evaporative crystallization of the NRRV.

Combined use of lactic-acid-producing bacteria as probiotics and rotavirus vaccine candidates expressing virus-specific proteins.

Due to the lower efficacy of currently approved live attenuated rotavirus (RV) vaccines in developing countries, a new approach to the development of safe mucosally administered live bacterial vectors is being considered, using probiotic bacteria as an efficient delivery platform for heterologous RV antigens. Lactic acid bacteria (LAB), which are considered food-grade bacteria and normal microbiota, have been utilized throughout history as probiotics and developed since the 1990s as a delivery system for recombinant heterologous proteins. Over the last decade, LAB have frequently been used as a platform for the delivery of various RV antigens to the mucosa. Given the appropriate safety profile for neonates and providing the benefits of probiotics, recombinant LAB-based vaccines could potentially address the need for a subunit RV vaccine. The present review focuses mainly on different recombinant LAB vaccine constructs for RV and their potential as an alternative recombinant vaccine against RV disease.

Reverse Genetics Approach for Developing Rotavirus Vaccine Candidates Carrying VP4 and VP7 Genes Cloned from Clinical Isolates of Human Rotavirus.

Species A rotaviruses (RVs) are a leading cause of severe acute gastroenteritis in infants and children younger than 5 years. Currently available RV vaccines were adapted from wild-type RV strains by serial passage of cultured cells or by reassortment between human and animal RV strains. These traditional methods require large-scale screening and genotyping to obtain vaccine candidates. Reverse genetics is a tractable, rapid, and reproducible approach to generating recombinant RV vaccine candidates carrying any VP4 and VP7 genes that provide selected antigenicity. Here, we developed a vaccine platform by generating recombinant RVs carrying VP4 (P[4] and P[8]), VP7 (G1, G2, G3, G8, and G9), and/or VP6 genes cloned from human RV clinical samples using the simian RV SA11 strain (G3P[2]) as a backbone. Neutralization assays using monoclonal antibodies and murine antisera revealed that recombinant VP4 and VP7 monoreassortant viruses exhibited altered antigenicity. However, replication of VP4 monoreassortant viruses was severely impaired. Generation of recombinant RVs harboring a chimeric VP4 protein for SA11 and human RV gene components revealed that the VP8* fragment was responsible for efficient infectivity of recombinant RVs. Although this system must be improved because the yield of vaccine viruses directly affects vaccine manufacturing costs, reverse genetics requires less time than traditional methods and enables rapid production of safe and effective vaccine candidates.IMPORTANCE Although vaccines have reduced global RV-associated hospitalization and mortality over the past decade, the multisegmented genome of RVs allows reassortment of VP4 and VP7 genes from different RV species and strains. The evolutionary dynamics of novel RV genotypes and their constellations have led to great genomic and antigenic diversity. The reverse genetics system is a powerful tool for manipulating RV genes, thereby controlling viral antigenicity, growth capacity, and pathogenicity. Here, we generated recombinant simian RVs (strain SA11) carrying heterologous VP4 and VP7 genes cloned from clinical isolates and showed that VP4- or VP7-substituted chimeric viruses can be used for antigenic characterization of RV outer capsid proteins and as improved seed viruses for vaccine production.

Effects of rotavirus NSP4 protein on the immune response and protection of the SR69A-VP8* nanoparticle rotavirus vaccine

Rotavirus causes severe diarrhea and dehydration in young children. Even with the implementation of the current live vaccines, rotavirus infections still cause significant mortality and morbidity, indicating a need for new rotavirus vaccines with improved efficacy. To this end, we have developed an SR69A-VP8*/S60-VP8* nanoparticle rotavirus vaccine candidate that will be delivered parenterally with Alum adjuvant. In this study, as parts of our further development of this nanoparticle vaccine, we evaluated 1) roles of rotavirus nonstructural protein 4 (NSP4) that is the rotavirus enterotoxin, a possible vaccine target, and an immune stimulator, and 2) effects of CpG adjuvant that is a toll-like receptor 9 (TLR9) ligand and agonist on the immune response and protection of our SR69A-VP8*/S60-VP8* nanoparticle vaccine. The resulted vaccine candidates were examined for their IgG responses in mice. In addition, the resulted mouse sera were assessed for i) blocking titers against interactions of rotavirus VP8* proteins with their glycan ligands, ii) neutralization titers against rotavirus replication in cell culture, and iii) passive protection against rotavirus challenge with diarrhea in suckling mice. Our data showed that the Alum adjuvant appeared to work better with the SR69A-VP8*/S60-VP8* nanoparticles than the CpG adjuvant, while an addition of the NSP4 antigen to the SR69A-VP8*/S60-VP8* vaccine may not help to further increase the immune response and protection of the resulted vaccine.

Effect of Formulation Variables on the Stability of a Live, Rotavirus (RV3-BB) Vaccine Candidate using invitro Gastric Digestion Models to Mimic Oral Delivery.

In this work, two different in vitro gastric digestion models were used to evaluate the stability of a live attenuated rotavirus vaccine candidate (RV3-BB) under conditions designed to mimic oral delivery in infants. First, a forced-degradation model was established at low pH to assess the buffering capacity of formulation excipients and to screen for RV3-BB stabilizers. Second, a sequential-addition model was implemented to examine RV3-BB stability under conditions more representative of oral administration to infants. RV3-BB rapidly inactivated at < pH 5.0 (37 °C, 1 h) as measured by an infectivity RT-qPCR assay. Pre-neutralization with varying volumes of infant formula (Enfamil®) or antacid (Mylanta®) conferred partial to full protection of RV3-BB. Excipients with sufficient buffering capacity to minimize acidic pH inactivation of RV3-BB were identified (e.g., succinate, acetate, adipate), however, they concomitantly destabilized RV3-BB in accelerated storage stability studies. Both effects were concentration dependent, thus excipient optimization was required to design candidate RV3-BB formulations which minimize acid-induced viral inactivation during oral delivery while not destabilizing the vaccine during long-term 2–8 °C storage. Finally, a statistical Design -of-Experiments (DOE) study examining RV3-BB stability in the in vitro sequential-addition model identified key formulation parameters likely affecting RV3-BB stability during in vivo oral delivery.