Rotational Constants Research Articles

Probing the Electronic Manifold of MgCl with Millimeter-Wave Spectroscopy and Theory: (3)2Σ+ and (4)2Σ+ States.

The millimeter/submillimeter spectrum of magnesium chloride (MgCl) has been observed in two new electronic excited states, (3)2Σ+ and (4)2Σ+, using direct absorption methods. The molecule was synthesized in a mixture of Cl2, argon, and magnesium vapor. For the (3)2Σ+ state, multiple rotational transitions were measured in the v = 0 level for all six isotopologues (24Mg35Cl, 24Mg37Cl, 25Mg35Cl, 25Mg37Cl, 26Mg35Cl, and 26Mg37Cl), as well as up to v = 13 for 24Mg35Cl. For the (4)2Σ+ state, less intense spectra were recorded for 24Mg35Cl (v = 0-2). Equilibrium rotational parameters were determined for both states for 24Mg35Cl, as well as rotational constants and 25Mg hyperfine parameters for the other isotopologues. A perturbation was observed between rotational levels of the two states due to an avoided crossing. Computations were also carried out at the CASPT2 and MRCISD+Q levels, and the resulting bond lengths for (3)2Σ+ and (4)2Σ+ states agree well with the experimental values of re = 2.536 and 2.361 Å. The computations show that the (3)2Σ+ state has a double-well potential; however, the state behaves as a single well with unperturbed vibrational levels up to v = 13 due to nonadiabatic interactions with the (4)2Σ+ state.

Micellar solubility and co-solubilization of fragrance raw materials in sodium dodecyl sulfate and polysorbate 20 surfactant systems.

The aim of this work was to investigate the solubility and co-solubilization of fragrance raw materials (FRMs) in sodium dodecyl sulfate (SDS) and polysorbate 20 (P20) surfactant micellar systems, which can advance our knowledge of multi-solute micellar solubilization and fragrance olfactory performance from product matrices containing the surfactants. The transfer of individual FRMs and binary FRM mixtures into micellar phases was quantified by UV-VIS differential spectroscopy and evaluated in terms of the standard Gibbs free energy change and micelle-water partition coefficient. Co-solubilization effects were further evaluated by the deviation ratio. Anionic SDS was found overall to be a more efficient solubilizer than nonionic P20. On an individual basis, micellar solubilization generally increased with solute lipophilicity but was additionally impacted by solute rigidity and steric effects. Micellar solubilization was favoured for more rigid structures and less favoured for FRMs that exhibited larger molecular rotation and steric hindrance. For multi-solute systems, three co-solubilization effects were observed: (i) inhibitive effect in which micellar partitioning of both solutes decreased, (ii) an inverse effect where partitioning of one solute increased while the other decreased and (iii) synergistic effect in which partitioning of both solutes increased. During co-solubilization in P20 micelles, many FRMs competed for solubilization between the polyoxyethylene chains in the outer layer of the micelle, thereby resulting in an inhibitory effect for both solutes. Co-solubilization of FRM binary mixtures in SDS micelles often resulted in a synergistic increase in micellar solubility, possibly due to micellar swelling, thereby facilitating partitioning of additional solutes into the micelle. An inverse effect in which the micellar solubility of one solute increased, while the other decreased was observed in both surfactant systems with varying degrees of partitioning depending on the composition of the FRM mixture. The results of this study provide valuable insights into the impact of FRM composition on multi-solute partitioning behaviour and the impact of surfactant type on co-solubilization in micellar solutions.

A simple approach to rotationally invariant machine learning of a vector quantity.

Unlike with the energy, which is a scalar property, machine learning (ML) prediction of vector or tensor properties poses the additional challenge of achieving proper invariance (covariance) with respect to molecular rotation. For the energy gradients needed in molecular dynamics (MD), this symmetry is automatically fulfilled when taking analytic derivative of the energy, which is a scalar invariant (using properly invariant molecular descriptors). However, if the properties cannot be obtained by differentiation, other appropriate methods should be applied to retain the covariance. Several approaches have been suggested to properly treat this issue. For nonadiabatic couplings and polarizabilities, for example, it was possible to construct virtual quantities from which the above tensorial properties are obtained by differentiation and thus guarantee the covariance. Another possible solution is to build the rotational equivariance into the design of a neural network employed in the model. Here, we propose a simpler alternative technique, which does not require construction of auxiliary properties or application of special equivariant ML techniques. We suggest a three-step approach, using the molecular tensor of inertia. In the first step, the molecule is rotated using the eigenvectors of this tensor to its principal axes. In the second step, the ML procedure predicts the vector property relative to this orientation, based on a training set where all vector properties were in this same coordinate system. As the third step, it remains to transform the ML estimate of the vector property back to the original orientation. This rotate-predict-rotate (RPR) procedure should thus guarantee proper covariance of a vector property and is trivially extensible also to tensors such as polarizability. The RPR procedure has an advantage that the accurate models can be trained very fast for thousands of molecular configurations, which might be beneficial where many training sets are required (e.g., in active learning). We have implemented the RPR technique, using the MLatom and Newton-X programs for ML and MD, and performed its assessment on the dipole moment along MD trajectories of 1,2-dichloroethane.

Dynamics of Water, CO₂, Ethane and Their Mixtures in ZSM-22 Zeolite: The Role of Polarity and Hydrogen Bonding

Abstract Understanding the interplay between confinement effects and intermolecular interactions is essential for predicting molecular diffusion in zeolites. In this study, we investigate the diffusion behavior of ethane, CO₂, and water in ZSM-22 molecular sieves, focusing on the effects of mixing these fluids. Our results reveal that while CO₂ has minimal impact on ethane diffusion, water significantly slows ethane’s motion by forming molecular bridges across the pore structure, reducing ethane's diffusion by up to 30%. Ethane, in turn, restricts water’s mobility, and reduces the water-water coordination number from 2.22 to 0.73 depending on concentration. The diffusion of CO₂ in mixtures shows a 40% increase in pure state under confinement. The role of polarity and hydrogen bonding is crucial, with water molecules exhibiting 1.2 hydrogen bonds in the confined state—much lower than the 3.4 bonds in bulk water. Molecular rotation in ZSM-22 of all fluids occurs at two distinct time scales: the short-time fast rotation dominated by molecular inertia and the long-time rotation hindered by fluid-zeolite interactions. For water, hydrogen bonding further restricts full rotational freedom. These findings provide a comprehensive understanding of how ethane, water, and CO₂ interact and diffuse in nanoporous materials.

Understanding solid nitrogen through molecular dynamics simulations with a machine-learning potential

We construct a fast, transferable, general purpose, machine-learning interatomic potential suitable for large-scale simulations of N2. The potential is trained only on high quality quantum chemical molecule-molecule interactions; no condensed phase information is used. Although there are no explicit or implicit many-molecule interaction terms, the potential reproduces the experimental phase diagram including the melt curve and the molecular solid phases of nitrogen up to 10GPa. This demonstrates that many-molecule interactions are unnecessary to explain the condensed phases of N2. With increased pressure, transitions are observed from cubic (α), which optimizes quadrupole-quadrupole interactions, through tetragonal (γ), which allows more efficient packing, to monoclinic (λ), which packs still more efficiently. On heating, we obtain the hcp three-dimensional (3D) rotor phase (β) and, at pressure, the cubic δ phase which contains both 3D and 2D rotors, tetragonal δ* phase with 2D rotors, and the rhombohedral ε. Molecular dynamics demonstrates where these phases are indeed rotors, rather than frustrated order. The model supports the metastability of the complex ι phase, but not the reported existence of the wide range of bond lengths. The thermodynamic transitions involve both shifts of molecular centers and rotations of molecules: the onset of rotation is rapid, whereas motion of molecular centers is inhibited and we suggest that this is the cause of the experimentally observed sluggishness of transitions. Routine density functional theory calculations give a similar picture to the potential. Published by the American Physical Society 2024

Pure rotational spectroscopic measurements on a uranium-containing polyatomic compound: SUO2

Ground-state rotational constants were determined from the rotational spectra of two isotopologues (S-32 and S-34) of SUO2. For 32SUO2 it was determined that A0= 5150.34(17) MHz, B0= 2950.302(12) MHz, and C0= 1872.933(13) MHz. The SUO2 molecules were produced using a laser ablation nozzle inside of a chirped pulse Fourier transform microwave spectrometer operating between 8 GHz and 18 GHz. The obtained rotational constants and Kraitchman substitution coordinates for sulfur are in very good agreement with those obtained from quantum chemical calculations.

Experimental and Computational Study of Ethanolamine Ices under Astrochemical Conditions

Ethanolamine (NH2CH2CH2OH) has recently been identified in the molecular cloud G+0.693-0.027, situated in the SgrB2 complex in the Galactic center. However, its presence in other regions, and in particular in star-forming sites, is still elusive. Given its likely role as a precursor to simple amino acids, understanding its presence in the star-forming region is required. Here, we present the experimentally obtained temperature-dependent spectral features and morphological behavior of pure ethanolamine ices under astrochemical conditions in the 2–12 μm (MIR) and 120–230 nm (VUV) regions for the first time. These features would help in understanding its photochemical behavior. In addition, we present the first chemical models specifically dedicated to ethanolamine. These models include all the discussed chemical routes from the literature, along with the estimated binding energies and activation energies from quantum chemical calculations reported in this work. We have found that surface reactions CH2OH + NH2CH2 → NH2CH2CH2OH and NH2 + C2H4OH → NH2CH2CH2OH in warmer regions (60–90 K) could play a significant role in the formation of ethanolamine. Our modeled abundance of ethanolamine complements the upper limit of ethanolamine column density estimated in earlier observations in hot core/corino regions. Furthermore, we provide a theoretical estimation of the rotational and distortional constants for various species (such as HNCCO, NH2CHCO, and NH2CH2CO) related to ethanolamine that have not been studied in existing literature. This study could be valuable for identifying these species in the future.

Autodetachment of Diatomic Carbon Anions from Long-Lived High-Rotation Quartet States.

We show that strong molecular rotation drastically modifies the autodetachment of C_{2}^{-} ions in the lowest quartet electronic state a^{4}Σ_{u}^{+}. In the strong-rotation regime, levels of this state only decay by a process termed "rotationally assisted" autodetachment, whose theoretical description is worked out based on the nonlocal resonance model. For autodetachment linked with the exchange of six rotational quanta, the results reproduce a prominent, hitherto unexplained electron emission signal with a mean decay time near 3ms, observed on stored C_{2}^{-} ions from a hot ion source.

Encasing Triaryltriazine with a Bulky Chiral Cap: Luminescent Chiral Crystalline Molecular Rotors with Modulation of Solid-State Chiroptical Properties Mediated by Molecular Rotation.

A novel structural motif for luminescent chiral crystalline molecular rotors with chiroptical properties correlated with the rotational motion in crystalline media is presented. This scaffold incorporates bulky chiral caps consisting of a homochiral binaphthyl moiety with a triisopropylsilyl (TIPS) group into triaryltriazine, as confirmed by single-crystal X-ray diffraction (XRD) analysis. Variable-temperature solid-state 2H NMR studies revealed a 4-fold rotation of the phenylenes occurred in the rotor crystal between 263 and 333 K, while a steric rotor analogue shows no rotational motion. Notably, a reduction in the dihedral angle of the binaphthyl moiety upon heating was observed in the chiral rotors, and a corresponding alteration of the circular dichroism (CD) signal was detected in the solid-state, while those of the steric rotors showed no alteration by the temperature change. We propose that the fast rotation of the phenyl rings affects the motion of neighboring isopropyl groups, leading to steric repulsion with the binaphthyl moieties and thereby inducing its conformational change. Furthermore, the chiral rotors exhibited circularly polarized phosphorescence in the solid-state at low temperature, originating from rotational displacement of the phenylene on triphenyltriazine during structural relaxation in the excited state. Meanwhile, the steric rotors showed significant circularly polarized fluorescence induced by the suppressed molecular motion via a sterically hindered lattice environment in the excited state. These results indicate that the bulky chiral cap introduced into the triaryltriazines, acting as a luminescent chiral crystalline molecular rotor, can be a useful scaffold for the modulation of solid-state chiroptical properties via molecular rotational motions.

Photoluminescence of Tetra(benzimidazole)phenylethene Derivatives and Their Carbene Metallacycles in Aggregates and Langmuir-Blodgett Films.

Molecular structure, external stimuli, and environmental factors all have a strong effect on the internal molecular rotation and vibration of aggregate-induced emission (AIE) luminogens. Here, we report the AIE effect for several newly synthesized amphiphilic tetra(benzimidazole)phenylethene (TBiPE) derivatives and their binuclear N-heterocyclic carbene silver (NHC-Ag) metallacycles in solutions, aggregates, and Langmuir-Blodgett (LB) films. Monolayer behaviors and microscopic images indicate that introducing alkyl chains and binuclear NHC-Ag metallacycles can facilitate the formation of a well-defined insoluble monomolecular layer at the air-water interface. Absorption and luminescence spectral features suggest that both the TBiPEs' cyclization structure and binuclear NHC-Ag metallacycles can provide additional driving forces to restrict the internal molecular motion of the tetraphenylethene (TPE) unit, thus enhancing the AIE effects. Further, external stimuli and environmental factors such as poor solvent addition and LB film deposition also play important roles in the photoluminescent intensity, maximum wavelength, and lifetime. These internal and external factors can result in around 30-40 nm blue-shift for the maximum luminescence wavelength and 2-3 times shorter for the luminescent lifetime. These phenomena can be attributed to the reason that the nonradiative energy transfer efficiency is weakened because of the enhanced hydrophobic interaction and metal-carbene coordination as well as the closely packed arrangement of AIEgens in the LB films; consequently, the radiation energy transfer efficiency increased.

Elastic differential neutron-scattering cross section on even Neodymium isotopes

In this paper, we present an analytical formula for the neutron scattering cross section on even-even heavy nuclei, employing the rotational model and making certain assumptions, such as the use of the Yukawa potential shape for the neutron-nucleon interaction, the rigid rotor approximation, and the assumption of a uniformly distributed nuclear matter within the nucleus. Notably, a significant aspect of this study is the avoidance of any approximation of a central potential, in contrast to the commonly employed methods of expanding the potential based on the power of , utilizing the Legendre polynomial basis, or employing Fourier-Bessel analysis. Despite the simplicity of the chosen model (rigid rotor model and the two-parameter potential), our results yield satisfying and encouraging outcomes. This suggests the effectiveness of our approach in analyzing neutron scattering on even-even heavy nuclei. It is important to note that further investigations are warranted to deepen our understanding and refine the assumptions utilized in this study. Future research should explore the applicability of the proposed analytical formula to diverse nuclei and consider more complex models to expand our comprehension of neutron-nucleus interactions.

In-plane orientational motions of the functional groups of molecules at the air/water interface by time-resolved vibrational sum frequency generation.

The movements of molecules at interfaces and surfaces are restricted by their asymmetric environments, leading to anisotropic orientational motions. In this work, in-plane orientational motions of the -C=O and -CF3 groups of coumarin 153 (C153) at the air/water interface were measured using time-resolved (TR) vibrational sum frequency generation (SFG). The in-plane orientational time constants of the -C=O and -CF3 groups of C153 are found to be 41.5 ± 8.2 and 36.0 ± 4.5ps. These values are over five-times faster than that of 198 ± 15ps for the permanent dipole of the whole C153molecule at the interface, which may indicate that the two groups experience different interfacial friction in the plane. These differences could also be the result of the permanent dipole of C153 being almost five times those of the -C=O and -CF3 groups. The difference in orientational motions reveals the microscopic heterogeneous environment that molecules experience at the interface. While the interfacial dynamics of the two functional groups are similar, our TR-SFG experiments allowed the quantification of the in-plane dynamics of individual functional groups for the first time. Our experimental findings about the interfacial molecular motion have implications for molecular rotations, energy transfer, and charge transfer at material interfaces, photocatalysis interfaces, and biological cell/membrane aqueous interfaces.

Equilibrium Structures of Propane and 2,2-Difluoropropane and Comparison with Other Two-Top Molecules

The Born–Oppenheimer ab initio equilibrium structures of propane (CH3)2CH2 and 2,2-difluoropropane (CH3)2CF2 were computed at the CCSD(T) level of theory using a basis set of quadruple zeta quality. The semiexperimental structure of propane was also determined from the ground state rotational constants corrected for rovibrational corrections calculated at the MP2 level of theory. Structural comparisons are made with other molecules and are discussed in terms of the quantum theory of atoms in molecules.

Identification in a Magnetically Levitated Rigid Rotor System Integrated with Misaligned Sensors and Active Magnetic Bearings

Identification in a Magnetically Levitated Rigid Rotor System Integrated with Misaligned Sensors and Active Magnetic Bearings

High-Resolution Spectroscopy and Structure of Heavy Carbon Subchalcogenides: Tricarbon Selenide, C3Se.

Linear tricarbon selenide, C3Se, has been studied spectroscopically for the first time using a combination of high-resolution infrared and microwave techniques. Probing laser ablation products from carbon-selenium targets in a free jet expansion with He, initial spectroscopic detection was accomplished in the infrared at a wavelength of 5 μm in search of the ν1 vibrational fundamental. Along with the band of the most abundant isotopic species C380Se found centered at about 2039 cm-1, the corresponding bands of the C382Se, C378Se, C376Se, and C377Se isotopologues were also detected. Pure rotational spectra of the five C3Se isotopologues in the 8-18 GHz frequency range were observed in a supersonic jet expansion using chirped-pulse microwave spectroscopy of the discharge products of selenophene, c-C4H4Se. Spectroscopic analyses were guided by results from high-level quantum-chemical calculations carried out at the coupled-cluster level of theory using large correlation-consistent basis sets. Using the experimentally derived ground-state rotational constants of five isotopologues and calculated zero-point vibrational corrections, an accurate semiexperimental equilibrium carbon-selenium bond length is derived.

Revealing the Structure of Sheer N-Acetylglucosamine, an Essential Chemical Scaffold in Glycobiology.

We explored the conformational landscape of N-acetyl-α-d-glucosamine (α-GlcNAc), a fundamental chemical scaffold in glycobiology. Solid samples were vaporized by laser ablation, expanded in a supersonic jet, and characterized by broadband chirped pulse Fourier transform microwave spectroscopy. In the isolation conditions of the jet, three different structures of GlcNAc have been discovered. These are conclusively identified by comparing the experimental values of the rotational constants with those predicted by theoretical calculations. The conformational preferences are controlled by intramolecular hydrogen bond networks formed between the polar groups in the acetamido group and the hydroxyl groups and dominated in all cases by a strong OH···O═C interaction. We reported an exception to the gauche effect due to the enhanced stability observed for the Tg+ conformer. All the structures present the same disposition of the acetamido group, which explains the highly selective binding of N-acetylglucosamine with different amino acid residues. Thus, the comprehensive structural data provided here shall help to shed some light on the biological role of this relevant amino sugar.

A DFT study of the effect of hydrostatic pressure on the structure and electronic properties of sarcosine crystal

ContextWe perform density functional theory calculations to study the dependence of the structural and electronic properties of the amino acid sarcosine crystal structure on hydrostatic pressure application. The results are analyzed and compared with the available experimental data. Our findings indicate that the crystal structure and properties of sarcosine calculated using the Grimme dispersion-corrected PBE functional (PBE-D3) best agree with the available experimental results under hydrostatic pressure of up to 3.7 GPa. Critical structural rearrangements, such as unit cell compression, head-to-tail compression, and molecular rotations, are investigated and elucidated in the context of experimental findings. Band gap energy tuning and density of state shifts indicative of band dispersion are presented concerning the structural changes arising from the elevated pressure. The calculated properties indicate that sarcosine holds great promise for application in electronic devices that involve pressure-induced structural changes.MethodsThree widely used generalized gradient approximation functionals—PBE, PBEsol, and revPBE—are employed with Grimme’s D3 dispersion correction. The non-local van der Waals density functional vdW-DF is also evaluated. The calculations are performed using the projector-augmented wave method in the Quantum Espresso software suite. The geometry optimization results are visualized using VMD. The Multiwfn and NCIPlot programs are used for wavefunction and intermolecular interaction analyses.

Hunting for Sulfur-containing Molecules in Space: A Spectroscopic Characterization of Cyclopropenethione Based on High-level Ab Initio Calculations

Cyclopropenethione falls into the class of complex organic molecules but has not yet been observed in the interstellar medium or any circumstellar disks. However, its existence is very likely, and thus this study provides high-level ab initio predictions, which may serve as reference data for future observations or experimental work. Rovibrational configuration interaction theory based on multidimensional potential energy surfaces being obtained from explicitly correlated coupled-cluster calculations has been used to predict the fundamental vibrational modes, the microwave spectrum, and low-lying rovibrational transitions. Rotational constants as well as quartic and sextic centrifugal distortion constants were obtained from vibrational perturbation theory.

Enhanced mitochondrial fluorescence imaging through confinement fluorescence effect within a rigid silicon suboxide network

Fluorescence imaging technology has emerged as a powerful tool for studying intricate mitochondrial morphology within living cells. However, the need for fluorophores with stable fluorescence intensity and low phototoxicity poses significant challenges, particularly for long-term live-cell mitochondrial monitoring. To address this, we introduce the confinement fluorescence effect (CFE) into the design of fluorophores. This strategy involves confining small-molecule fluorophores within a silicon suboxide network structure of nanoparticles (CEF-NPs), which restricts molecular rotation, resulting in the suppression of non-radiative transition and the isolation of encapsulated fluorophores from surrounding quenching factors. CFE-NPs (SY2@SiOx) exhibit exceptional properties, such as high fluorescence intensity (80-fold) and reduced phototoxicity (0.15-fold). Furthermore, the TPP + -functionalized CFE-NPs (SY2@SiOxTPP) demonstrated efficacy in mitochondrial imaging and mitochondrial dynamics monitoring. Biochemistry assays indicated that SY2@SiOxTPP exhibits significantly lower phototoxicity to mitochondrial functions compared to both small-molecule fluorophore and commercial Mito Tracker. This approach allows for the long-term dynamic monitoring of mitochondrial morphological changes through fluorescence imaging, without impairing mitochondrial functionality.

Molecular influence on nuclear-quadrupole-coupling effects in laser induced alignment.

We computationally studied the effect of nuclear-quadrupole interactions on the field-free impulsive alignment of different asymmetric-top molecules. Our analysis is focused on the influence of the hyperfine- and rotational-energy-level structures. These depend on the number of nuclear spins, the rotational constants, and the symmetry of the tensors involved in the nuclear spin and external field interactions. Comparing the prototypical large-nuclear-spin molecules iodobenzene, 1,2-diiodobenzene, 1,3-diiodobenzene, and 2,5-diiodobenzonitrile, we demonstrate that the magnitude of the hyperfine splittings compared to the rotational-energy splittings plays a crucial role in the spin-rotational dynamics after the laser pulse. Moreover, we point out that the impact of the quadrupole coupling on the rotational dynamics decreases when highly excited rotational states dominate the dynamics.