Rotary Technique Research Articles

A novel puzzle ring replacement technique of a lumen-apposing metal stent with a double-pigtail plastic stent to prevent walled-off necrosis recurrence (with video).

Replacing a lumen-apposing metal stent (LAMS) with a double-pigtail plastic stent (DPS) after treatment for walled-off necrosis contributes to the prevention of recurrence. However, the success rate is not very high. To overcome this issue, we devised a novel stent-replacement technique. In the final treatment procedure, a 7-F DPS was placed in the lumen of the LAMS. Subsequently, the walled-off necrosisshrank, and granulation formed over the pigtail portion, which fixed the DPS. The LAMS alone was removed with grasping forceps, leaving the DPS in the lumen of the LAMS (i.e., a puzzle-ring technique; direct or rotary removal technique). Between August 2021 and August 2023, 18 patients were evaluated for recurrence prevention using this novel technique (median duration of LAMS placement, 37 days). In 17 patients (94.4%), the LAMS was successfully replaced with a 7-F DPS (direct technique 14, rotary technique 3; median removal procedure time, 3 min). No recurrence was observed during the median observation period of 385 days. Before using this technique (April 2012 to August 2022), the technical success rate of replacement of LAMS with 7-F DPS was significantly lower (61.8% [42/68, p = 0.02]). Recurrence of pancreatic fluid collection occurred in 15.3% (4/26) of the patients who could not undergo replacement with a 7-F DPS. The novel puzzle ring technique, which improves the success rate of LAMS for DPS replacement, may be useful in reducing recurrence after walled-off necrosistreatment.

Comparative Assessment of Gutta-Percha Removal Techniques for Endodontic Retreatment: Efficiency and Clinical Implications

Background: Endodontic retreatment involves the removal of gutta-percha and sealer from root canals to address treatment failures and persistent infections. This study aimed to systematically evaluate and compare the effectiveness of different gutta-percha removal techniques.Methods: Sixty extracted human teeth with single canals were selected. The canals were initially treated, obturated with gutta-percha, and divided into six groups (n=10 each). Each group represented a distinct removal technique: rotary instrument-driven, Gates-Glidden drill-assisted, solvent-based dissolution, ultrasonic removal, heat-based softening, and a control group. Gutta-percha mass and canal wall cleanliness were assessed post-removal. Statistical analyses were performed using ANOVA and post hoc Tukey's HSD tests.Results: The solvent-based dissolution technique exhibited the most efficient removal, achieving the lowest mean remaining gutta-percha mass (0.89 ± 0.15 mg) and the highest canal wall cleanliness (95% ± 3%). The ultrasonic technique also showed effective removal capabilities with a mean remaining mass of 1.56 ± 0.22 mg and a cleanliness of 89% ± 4%. The rotary technique resulted in a mean mass of 2.47 ± 0.30 mg and cleanliness of 84% ± 5%. Gates-Glidden drill-assisted and heat-based techniques showed moderate performance with remaining masses of 3.18 ± 0.25 mg and 2.10 ± 0.20 mg, respectively, and cleanliness percentages of 78% ± 6% and 81% ± 5%. The control group had the highest remaining mass (9.88 ± 0.42 mg) and the lowest cleanliness (10% ± 2%), confirming the efficacy of the removal techniques.Conclusion: The solvent-based dissolution technique demonstrated superior efficacy in gutta-percha removal. Ultrasonic and rotary techniques were also effective choices. Clinicians should consider these findings when selecting gutta-percha removal methods for endodontic retreatment procedures.Keywords: Endodontic retreatment; Gutta-Percha removal; Canal wall cleanliness; Comparative efficacy; Removal techniques

A Comparative Evaluation of the Dissolving Abilities of Eucalyptus, Orange, and Castor Oils in Endodontic Retreatment Using Conventional and Rotary Techniques.

Endodontic retreatment is essential for periapical healing, involving the removal of inadequate fillings, thorough cleaning, and new filling application to prevent leakage. This study compares the dissolving abilities of Eucalyptus, Orange, and Castor oils in the re-treatment of resin-based endodontic fillings using conventional and rotary techniques. Thirty single-rooted human teeth were prepared and filled with gutta-percha and AH Plus sealer. They were divided into three groups (n=10) based on the solvent used (Eucalyptus, Orange, or Castor oil) and further subdivided based on the techniques used (conventional and rotary). Standardised re-treatment procedures were performed, and the amount of residual material was measured. A significant difference (p<0.001) was found among the groups, indicating that both the type of solvent and the technique significantly affected the amount of residual material. The rotary technique generally left less residual material compared to the conventional technique for all solvents. Eucalyptus oil with the rotary technique showed the least residual material (mean = 5.8), while Castor oil with the conventional technique showed the most (mean = 10.2). Eucalyptus oil, especially when used with rotary techniques, is highly effective in removing resin-based endodontic fillings, providing a viable and safer alternative to traditional solvents. The study underscores the importance of selecting appropriate solvents and techniques for successful endodontic re-treatment.

Effect of different instrumentation techniques on students' performance and outcomes of nonsurgical root canal treatment.

This study compared, retrospectively, the incidence of clinical errors and effects on treatment outcomes, when students were exposed to two different instrumentation techniques: a hybrid rotary technique (HYB), consisting of both hand instrumentation with hand stainless steel and Ni-Ti files plus the use of a rotary system (Vortex Blue, Dentsply Sirona), versus a full reciprocation instrumentation technique (WaveOne Gold [WOG], Dentsply Sirona). A total of 368 endodontic cases (n=184) in anterior and premolar teeth, completed by dental students at the University of Michigan School of Dentistry from 2013 to 2022, were used for the study. The groups were evaluated by two calibrated clinicians, observing the incidence of clinical errors: file separations, over-instrumentation, ledges and transportations. Treatment outcomes were also observed. Data were analyzed statistically by Fisher's exact test and Mann-Whitney U test (p<0.05). No significant difference in file separations, ledges, and transportation was observed between the two groups. However, the WOG Group experienced significantly more over-instrumentation than HYB group, although this did not significantly affect tooth survival or periapical index (PAI). Cases with PAI scores of 5 were found to have significantly less tooth survival compared to the other PAI scores. It can be concluded that both techniques in our study are well suited to advancing the endodontic dental education of students and novice operators, anticipating relatively successful outcomes of tooth survival, as long as the cases selected are less severe in progression preoperatively.

Volumetric analysis after caries excavation with caries detecting dyes and chemomechanical caries removal agents using 3D scanner-a randomised clinical trial

AimThis research aimed to use an extra-oral 3D scanner for conducting volumetric analysis after caries excavation using caries-detecting dyes and chemomechanical caries removal agents in individuals with occlusal and proximal carious lesions.MethodsPatients with occlusal (A1, A2, A3) and proximal carious lesions (B1, B2, B3) were treated with the conventional rotary technique, caries detecting dyes (CDD) and chemomechanical caries removal (CMCR) method on 90 teeth (n = 45 for each). Group A1, B1: Excavation was performed using diamond points. Group A2, B2: CDD (Sable Seek™ caries indicator, Ultradent) was applied and left for 10 s, and then the cavity was rinsed and dried. For caries removal, diamond points or excavators were used. Group A3 and B3: BRIX3000 papain gel was applied with a micro-brush for 20 s and was activated for 2 min, and then the carious tissue was removed with a sharp spoon excavator. Post-excavation cavity volume analysis was performed using a 3D scanner. The time required and the verbal pain score (VPS) for pain were scored during excavation. Post-restoration evaluation was performed at 1, 3, and 6 months FDI (Federation Dentaire Internationale) criteria.ResultsComparison of age, time and volume with study groups were made using Independent Sample’ t’ test and one-way analysis of variance (ANOVA) for two and more than two groups, respectively. Using Cohen’s Kappa Statistics, evaluators 1 and 2 agreed on caries removal status aesthetic, functional and biological properties at different follow-ups. The chi-square test revealed that the rotary groups [A1(2.5 ± 0.4 min) B1(4.0 ± 0.4 min)] had significantly less (p = 0.000) mean procedural time than CDD [A2(4.5 ± 0.4 min) B2(5.7 ± 0.4 min)] and CMCR [A3(5.4 ± 0.7 min) B3(6.2 ± 0.6 min)] groups. The CMCR group showed better patient acceptance and less pain during caries excavation than the rotary and CDD groups. CMCR group showed significantly less mean caries excavated volume(p = 0.000). Evaluation of restoration after 1-, 3-, and 6-month intervals was acceptable for all the groups.ConclusionBrix3000 helps effectively remove denatured teeth with less pain or sensitivity. The time required for caries removal was lowest in the rotary method and highest in the brix3000 group, while the volume of caries removed was the lowest for brix3000 and highest for the rotary group.

Examining the properties, behaviour in firing and potential application of coal mine overburden for stoneware ceramics

Purpose. A binary mixture of a ceramic body was studied, incorporating overburden from a coal mine site in Bontang, East Kalimantan, Indonesia. This overburden material has been tested for the manufacture of stone-ceramic body. Methods. The initial characterization of overburden materials includes testing the chemical composition by XRF analysis and mineral content by XRD analysis on raw materials and overburden exposed to high temperature. The composition of ceramic specimens is a mixture of 85% overburden material and 15% fine sand. Firing temperatures in the range of 900-1100°C were applied to the ceramic body specimen. Then, ceramic properties, such as physical color, plasticity, shrinkage, water absorption and density were analyzed. Findings. The results show that the ceramic specimen experiences densification when exposed to high temperature in this range, which in turn contributes to low water absorption and high flexural strength. This ultimately results in low water absorption below 1.0% at 1100°C, which is favorable for stoneware type of ceramics. The mechanical properties of specimen at 1000°C is in accordance with stoneware body standard. In addition to this, it is believed to be more energy efficient, since the low firing temperature is sufficient to achieve the stoneware specification. Originality. The binary clay-based ceramic have been tested using coal mine overburden and river sand with a high Fe2O3 content. Together with the presence of alkali oxides and calcium in the raw materials, this can potentially reduce the use of fluxing agent. A comprehensive study has been conducted on the characteristics, firing effect and application of stoneware. Practical implications. Some ceramic prototypes from this result were also made using a rotary technique and heated in this temperature range. Since overburden is generally considered to be backfill material, the selective clay material application for ceramics can provide the potential to stimulate local product innovation by utilizing easily available overburden materials.

Effect of Er:YAG Laser Exposure on the Amorphous Smear Layer in the Marginal Zone of the Osteotomy Site for Placement of Dental Screw Implants: A Histomorphological Study.

The placement of dental screw implants typically involves the use of rotary techniques and drills to create a bone bed. This study explores the potential benefits of combining this method with an Er:YAG laser. Split osteotomies were performed on 10 jaws of euthanized domestic pigs (Sus scrofa domestica), with 12 mandibular implant osteotomies in each jaw, divided into 4 groups. In order to make a comprehensive assessment of the effect of Er:YAG lasers, histomorphological techniques were used to measure the reduction in amorphous layer thickness after Er:YAG laser treatment, both with and without the placement of dental screw implants from different manufacturers. Following bone decalcification and staining, the thickness of the amorphous layer was measured in four groups: Group A-osteotomy performed without Er:YAG laser treatment-had amorphous layer thicknesses ranging from 21.813 to 222.13 µm; Group B-osteotomy performed with Er:YAG laser treatment-had amorphous layer thicknesses ranging from 6.08 to 64.64 µm; Group C-an implant placed in the bone without laser treatment-had amorphous layer thicknesses of 5.90 to 54.52 µm; and Group D-an implant placed after bone treatment with Er:YAG laser-had amorphous layer thicknesses of 1.29 to 7.98 µm. The examination and photomicrodocumentation was performed using a LEICA DM1000 LED microscope (Germany) and LAS V 4.8 software (Leica Application Suite V4, Leica Microsystems, Germany). When comparing group A to group B and group C to D, statistically significant differences were indicated (p-value = 0.000, p < 0.05). The study demonstrates the synergistic effects and the possibility of integrating lasers into the conventional implantation protocol. By applying our own method of biomodification, the smear layer formed during rotary osteotomy can be reduced using Er:YAG lasers. This reduction leads to a narrower peri-implant space and improved bone-to-implant contact, facilitating accelerated osseointegration.

Conventional Rotary Technique and Piezosurgical Technique in the Removal of Impacted Mandibular Third Molar: A Comparative Study.

To compare the operating time, postoperative pain, edema, trismus, and patient acceptance following surgical removal of impacted third molar using piezosurgery and conventional rotary technique. About 42 patients with impacted mesioangular mandibular third molars were included in this study. Subjects are divided into two groups: group I (treated with conventional rotary technique) and group II (treated with piezosurgery). Duration of surgery, pain, trismus, and swelling were assessed. The patients were evaluated on the 1st, 3rd, and 7th postoperative days. Postoperative pain, trismus, and edema were reduced with piezosurgery compared with conventional technique. Even though the duration of time was longer with piezosurgery, patient comfort was found to be better. Piezosurgery is a meticulous and innovative ultrasonic technique with selective bone cutting and better postoperative outcomes. However, it is expensive, and the operating time is prolonged. Piezosurgery is an alternative in the surgical removal of third molars as it ensures precise and selective cutting, with no injury to the surrounding soft tissues. Postoperative outcome and patient acceptance are improved with piezosurgery.

Exploring a Paradigm Shift in Primary Teeth Root Canal Preparation: An Ex Vivo Micro-CT Study.

Traditional hand instrumentation is a commonly used technique to perform pulpectomy in deciduous teeth by most specialists in pedodontics. Lately, dentists have embraced rotary instrumentation as a safe and effective alternative. This study aimed to compare the efficacy of root canal preparation in extracted primary molars between manual and two rotary file systems using micro-CT. Thirty-six extracted human second primary mandibular molars were divided into three groups according to the instrumentation method: (1) Manually instrumented (MI) group (n = 9) in which the teeth were treated using K-files up to size 30; (2) Kedo-Ssystem (KS) group (n = 9); (3) ProTaper Gold system (PTG) group (n = 10) and control group (n-8). Each tooth was scanned before and after the retrograde root canal preparation. Residual dentin volume was calculated using micro-CT scans to evaluate the technique's efficacy. Additionally, the preparation time and procedural errors were recorded for each tooth preparation. A one-way ANOVA test was carried out to compare the groups' dentin volume and preparation time. The mean preparation time using the manual method (13.14 min) was more than two times longer than that of the rotary techniques (4.62 min and 6.45 min). The manual preparation method using a K-file removed almost half the root canal material when compared with the rotor method (p = 0.025). Conclusion: our results suggest that rotary instrumentation is more efficient for root canal preparation in primary teeth than the traditional manual method. This finding may call for a paradigm shift in current clinical practices, where manual instrumentation is still commonly preferred.

Diagnosis and Assessment of Dental Caries Using Novel Bioactive Caries Detecting Dye Solution.

The goal of materials should be early caries detection, removal of carious lesions, and reduction of dentin hypersensitivity. Thus, the study aims to determine the efficacy of a bioactive caries detecting dye (BCD) for the diagnosing and mechanical removal of occlusal and proximal dental caries. Patients with occlusal (A1, A2) and proximal carious lesions (B1, B2) were treated with the rotary technique and BCD solution on 120 teeth (n = 60 for each). Group 1: Excavation was performed using diamond points. Group 2: 0.5 mL of BCD solution was scrubbed for 20 sec and excavation was performed with a sharp spoon excavator. Post-excavation cavity volume analysis was performed using a 3D scanner. The time required, VAS for pain, VAS for facial expression, and sound eye motor scoring were scored during excavation. Post-restoration evaluation was performed at 3, 6, and 12 months (FDI criteria). The chi-square test revealed that the A1 (197.90 30.97 s) and B1 (273.06 69.95 s) had significantly less mean procedural time than the A2 (292.13 44.87 s) and B2 (411.86 88.34 s). BCD (A2, B2) group showed good patient acceptance, less pain during caries excavation VAS (p = 0.001, FACE (p = 0.001), and SEM (p < 0.001) analysis than the rotary group. There was a statistically insignificant difference between groups immediately (p = 0.235), (p = 0.475) and after 24 h (p = 0.561), (p = 0.688). Color score, hardness of excavated surface, and caries removal score for occlusal and proximal groups showed insignificant differences between the groups. BCD group showed significantly less mean caries excavated volume for the occlusal group (p = 0.003) as compared to the proximal group (p = 0.417) evaluated by 3D scanner. Evaluation of restoration after 3-, 6-, and 12 months intervals (Occlusal caries group (p = 0.247), (p = 0.330), and (0.489) and Proximal caries group (p = 0.299), (p = 0.594), and (0.494)) was acceptable for both the groups. BCD helps in identification of dental caries clinically, radiographically, and in effective removal of denatured teeth with less pain or sensitivity.

Técnicas endodônticas com instrumentos de Níquel Titânio: análise da qualidade e eficiência da instrumentação em molares decíduos

ABSTRACT Objective: The purpose of the present in vitro study was to evaluate the efficiency of three different instruments in the root canals of artificial primary molars as well as the quality of the fillings. Methods: Sixty artificial primary molars were divided into three groups of 20 teeth. Each group was submitted to a different technique: Group 1 - conventional manual technique using Kerr files; Group 2 - manual technique with nickel-titanium files; Group 3 - NiTi rotary technique. The root canals were filled with calcium hydroxide paste. Aspects such as homogeneity of the fillings, taper and flowability of the preparations were considered comparatively to assess the quality of the instrumentations. The non-parametric Kruskal-Wallis and Mann-Whitney tests were used to compare the efficiency of the preparation of the root canal considering the preparation times of them. Results: All three techniques were equally effective at shaping the root canals of primary teeth. The working time was shorter with the rotary instrument (p=0.000). In the pairwise comparisons, working time was shorter with the rotary instrument compared to the manual techniques with steel files (p=0.000) and NiTi files (p=0.000). Comparing the manual techniques, the working time was shorter with NiTi files compared to steel files (p=0.011). Moreover, less variability in the preparation time was found when the rotary instrument was used. Conclusions: The mechanized rotary method led to a shorter operating time in comparison to the manual techniques and is therefore a preferable option for the preparation of the root canals of primary teeth.

Rotary systems in root canal treatment of primary teeth

Introduction: Root therapy in primary teeth aims to remove the necrotic pulp, to prevent premature tooth loss, and to maintain the primary teeth until exfoliation. Rotary systems allow for more effective root canal treatments. Objective: To analyze the literature for the characteristics of the rotary systems such as root canal preparation, obturation time, post-operative pain and clinical success.Methodology: A exhaustive research was performed in PUBMED, to find relevant studies about the use of rotary systems in pediatric dentistry. Results: Rotary files provide a greater root canal preparation, show more conservation of tooth structure with less mistakes in comparison with other techniques. This technique simplifies the procedure, shows less post operative pain, and is reflected in the cooperation of the pediatric patient. Rotary files exhibit a significant cleaning efficacy and a greater bacterial removal that led to a significant clinical success. Conclusion: due to the complexity of the primary roots and how precise the root canal treatment must be. The use of rotary techniques can improve root canal treatment of primary teeth.

Quality of Root Canal Filling in Manually and Rotary-Filed Single-Rooted Teeth

Objective: This study aimed to determine if there was a significant difference in root canal obturation quality between single-rooted teeth produced using a manual approach and those prepared using a rotational method, as determined by intraoral periapical radiographs. Study Design: Randomized control trial Place and Duration: This randomized study was conducted at Bakhtawaramin Medical and Dental College during in the period from April, 2022 to September, 2022. Methods: Total 80 patients of both genders were presented. All the included cases had single rooted teeth. Age, gender, and residence were some of the detailed demographic information that was documented after getting informed written consent. Patients were equally divided in two groups. Group I underwent manual root canal treatment in 40 cases while in group II rotary endodontic preparation. Outcomes among both groups were recorded in terms of quality of root canal filling. SPSS 23.0 was used to analyze all data. Results: There were 45 (56.3%) females and 35 (43.7%) males. Mean age of the patients in group I was 33.3±8.35 years and in group II mean age was 34.9±7.23 years. We did not find any significant difference in root canal filling and homogeneity among both groups. Group II showed a significantly good results of T score as compared to group I with p value &lt;0.005. Conclusion: According to the results of this research, the rotary approach yielded higher quality obturations in terms of taper and overall quality than did the traditional method. Despite this, there was no difference between rotary and manual instrumentation in terms of the radiographic technical quality of the root canal obturation with respect to length and density. Keywords: obturation quality, Root Canal Treatment, Manual technique, Rotary Technique

Economic analysis of the different endodontic instrumentation techniques used in the Unified Health System

BackgroundTo assess the financial impact of incorporating a new (reciprocal) technology into endodontic treatments in the public health system (SUS).MethodsThis was a economic evaluation study (comparing the 3 different endodontic instrumentation techniques—manual, rotary and reciprocating), allocative efficiency analysis to optimize existing resources in the SUS, and financial contribution impact analysis of incorporation of a new technology. Thirty-one (31) 12 years-old volunteers were evaluated.ResultsThe incremental cost-effectiveness ratio (ICER) was calculated at R$1.34/min, − R$0.60/min and BRL 0.10/min for the single-rooted, bi-rooted and tri-rooted teeth, respectively, when the rotary technique was compared with the manual type. In turn, the ICER was R$ 21.04/min, − R$ 0.73/min and − R$ 2.81/min for the 3 types of teeth, respectively, when the reciprocating technique was compared with the manual type. The incremental financial impact of replacing manual endodontic with rotary endodontic treatments would be − R$ 2060963.66 in the case of single-rooted teeth, but the number of treatments would also be reduced (− 19,379). In the case of two-rooted teeth, the incremental financial impact would be BRL 34921540.62 with the possibility of performing an additional 204,110 treatments. In turn, BRL 11523561.50 represented the incremental financial impact for teeth with 3 or more roots and with an increase of 72,545 procedures. When we analyzed the incremental financial impact of replacing manual endodontic with reciprocating endodontic treatments, it would be − R$ 730227.80 in the case of single-rooted teeth, allowing for an additional 2538 treatments. In turn, R$ 21674853.00 represented the incremental financial impact for bi-radicular teeth, with an increase of 121,700 procedures. In the case of two-rooted teeth, the incremental financial impact would be BRL 13591742.90 with the possibility of performing an additional 40,670 treatments.ConclusionsThe reciprocating technique could improve access to endodontic treatment in the SUS as it allowed a simultaneous reduction in clinical time and associated costs. However, the higher number of endodontic treatments performed would have a financial impact.

Rotary versus Manual Instrumentation for Root Canal Preparation in Primary Teeth: A Systematic Review and Meta-Analysis of Clinical Trials.

Objectives:The aim of this systematic review was to assess the scientific evidence on the effect of rotary versus manual instrumentation for root canal preparation in primary teeth.Materials and Methods:Search terms were selected based on Medical Subject Headings (MeSH) and non-MeSH terms. Electronic database search of English published literature was performed in March 2020 within the following databases: Scopus, Cochrane, PubMed, and Embase. The risk of bias of selected studies was assessed by means of Cochrane collaboration tool. The heterogeneity level among the included studies was measured by I2 index. For statistical analysis of instrumentation time, standard mean difference (SMD) of continuous data was analyzed with 95% confidence intervals (95% CIs) using the fixed-effects model. A random-effects model was used for analysis of odds ratio (OR) to assess the probability of optimal fill, underfill, and overfill obturations. Forest plots were applied to show the results and to estimate the effectiveness of rotary instrumentation.Results:Seven articles were selected for this review. The SMD in rotary techniques was 1.79 min less than manual techniques (95% CI: −2.56–−1.03 min) and had a significant P = 0.001. The OR of optimum quality was calculated to be 3.53 (95% CI: 1.79–6.97) in the rotary technique at P = 0.254.Conclusions:Within the limitations of this review, it can be asserted that rotary files decrease the instrumentation time and increase the rates of optimally filled canals in primary teeth. However, these files do not decrease the risk of underfilling and overfilling compared to manual files.

Comparative and clinical evaluation between piezoelectric and conventional rotary techniques for mandibular impacted third molar extraction.

The aim of this study was to evaluate and compare the operative and postoperative outcomes of the mandibular impacted third molar removal using piezoelectric technique and conventional rotary bur technique. The study was conducted in the department of oral and maxillofacial surgery between January 1, 2019, and January 1, 2020. Thirty patients, with an age of 18-40 years, with asymptomatic bilateral impacted mandibular third molars, were selected for the study and randomly surgical extraction was done either using piezoelectric or the conventional rotary bur technique on each site. The intraoperative time taken, postoperative pain, swelling, and trismus were assessed over a follow-up period of 7 days postoperatively. Study and control groups were compared using paired t-test. There was statistical significance in reduction of pain and swelling in the study group where the duration of surgery was increased in the study group. Even if piezoelectric technique takes more time but can be used safely as another technique to conventional surgical method with surgical bur and handpiece for removal of impacted mandibular third molars.

Bio-efficacy of Karu Nochi, Vitex negundo L. (Lamiaceae) against the dengue vector, Aedes aegypti (L.)

The dengue vector, Aedes aegypti (L.) is one of the world's deadliest species and it spreads diseases like Zika, chikungunya, dengue, and yellow fever. In this present investigation, we attempt to evaluate the larvicidal toxicity of different solvent extracts and essential oil of Karunochi, Vitex negundo (L.) on third instar larvae of the dengue vector, A. aegypti. The crude extracts were prepared by using soxhlet apparatus and rotary vacuum evaporator technique. The highest mortality was observed in essential oil and ethanolic extract followed by hexane and acetone extracts, the lethal concentrations LC50 (LC90) values were obtained from noticed, for Vn-EO- 218.46 (517.10), Vn-EE 268.37 (592.56), Vn-HE 309.59 (667.33), and Vn-AE 327.88 (748.47), respectively and nil mortality observed in the control treatment. Karunochi, V. negundo essential oil, and ethanolic extract (Vn-EE) were more efficient against A. aegypti than crude extracts of Vn-AE (acetone) and Vn-HE (hexane). Therefore, from our studies the formulations are promising for a low-cost larvicide without isolating an active ingredient, EO’s were tested. The goal of this study is to promote the use of plant-based larvicides in public health programmes.

Anti-blastocystosis activity of antioxidant coated ZIF-8 combined with mesoporous silicas MCM-41 and KIT-6

The biocompatible hybrid Zeolitic imidazolate framework-8 (ZIF-8)/structured silica nanocomposite can be loaded with antioxidants such as curcumin and resveratrol to offer multiple advantages of drug functionalization and structural stability. blastocystosis, an enteric parasite, has various outcomes and its treatment includes drugs which have side effects and do not result in a full cure. We aimed to design novel biocompatible nanocomposites containing natural antioxidant, resveratrol or curcumin and ZIF-8/mesoporous silica. We also assessed their anti-blastocystosis activities as bioactive novel nanocomposites. The nano-silica (MCM-41 and KIT-6) was synthesized using a hydrothermal technique and made composite with ZIF-8 using an ultrasonic technique. The antioxidants, curcumin and resveratrol, were loaded over ZIF-8/MCM-41 and ZIF-8/KIT-6 using a rotary evaporator technique to form novel nanocomposites with bioactive properties. The formulated nanocomposites were characterized. To test their biological activity, suspension of cultured blastocystosis cysts (subtype 3) were exposed to increasing concentrations of nanocomposites and the minimal lethal concentration of each nanocomposite was calculated. The bioactive nanocomposites (ZIF-8/KIT-6, ZIF-8/KIT-6/Resveratrol and ZIF-8/MCM-41/Curcumin) were formulated. Anti-blastocystosis activity of the tested nanocomposites was both dose and time dependent. ZIF-8/KIT-6/Resveratol showed the maximum percentage of growth inhibition (~ 100%) at a concentration of 500 µg/ml after 5 h of exposure. More than 90% of blastocystosis cysts’ growth was significantly inhibited at all concentrations of ZIF-8/MCM-41/Curcumin, with different times of exposure, while it occurred only at the highest concentration of ZIF-8/KIT-6 (800 µg/ml). Using cheap, simple, reproducible and scalable techniques, we nano-formulated innovative bioactive nanocomposites, by incorporating the bioactive ZIF-8 (Zn2+ with imidazole), structured mesosilica and natural antioxidant compounds, curcumin or resveratrol, to generate multifunctional modalities. These eco-friendly, naturally based, safe, economical, biocompatible, and bioavailable nanocomposites are potential nanotherapeutics. The anti-blastocystosis results of these three nanocomposites indicate their potentially promising innovative and safe use as alternative Blastocystosis therapies.

OPTIMASI PRODUKSI ECOPRINT FABRIC DENGAN TEKNIK ROTARY PRINTING

Abstract Ecoprint is a process of transferring colors and shapes to the fabric through direct contact between the leaves and the fabric. Ecoprint technique is an advancement technique in ecofashion that produces environmentally friendly fashion products. The coloring that are often used by the techniques are iron blanket technique and pounding technique. Furthermore, another technique used for coloring ecoprint fabric is using the leaves as ecoprint stamps. It works by coloring the leaf sheet with natural or synthetic dye and followed by adhering the leaf onto the fabric. By pressing the leaves that have been covered in dye, a leaf motif with its tissue will appear on the fabric. The ecoprint stamp technique is easier than other techniques. In the implementation, this technique is still considered taking a long time in the process that an eco-rotary printing technique needs to be developed. Its technique is expected to solve problems that ecoprint stamp techniques have. The engineering of eco rotary print tool as a medium on cap rotary printing technique is resulting 2 prototypes. i.e., 2 roll model, and 3 roll model. The eco-rotary printing method is inspired by a motif roll paint that are able to give color motif on the walls in a relatively fast time. Thus, the leaves are affixed to the roll combined with natural dyes to create a leaf motif on the surface of the fabric. The test results from the two prototypes of the tool are presented. The 3 roll model gives the result of leaf motif color on the fabric with better quality than the 2 roll model. This makes production more effective and efficient in terms of the time of the production process. And, finally, the results of this study are very possible to be utilized in the production of large-scale ecoprint fabric. Key word : Ecoprint, Ecofashion, Eco Rotary Print

Liposome-Fe3 O4-Doxorubicin Mediated Treatment of Melanoma Tumors.

Purpose: Magnetic hyperthermia is a treatment method based on eddy currents, hysteresis, and relaxation mechanisms of magnetic nanoparticles (MNPs). MNPs such as Fe3 O4 have the ability to generate heat under an alternating magnetic field. Heat sensitive liposomes (Lip) convert from lipid layer to liquid layer through heat generated by MNPs and can release drugs. Methods: In this study, different groups of doxorubicin (DOX), MNPs and liposomes were evaluated. The MNPs were synthesized by co-precipitation method. The MNPs, DOX and a combination of MNPs and DOX were efficiently loaded into the liposomes using the evaporator rotary technique. Magnetic properties, microstructure, specific absorption rate (SAR), zeta potential, loading percentage of the MNPs and DOX concentration in liposomes, in vitro drug release of liposomes were studied. Finally, the necrosis percentage of cancer cells in C57BL/6J mice bearing melanoma tumors was assessed for all groups. Results: The loading percentages of MNPs and concentration of DOX in the liposomes were 18.52 and 65% respectively. The Lip-DOX-MNPs at the buffer citrate solution, showed highly SAR as the solution temperature reached 42°C in 5 minutes. The release of DOX occurred in a pH-dependent manner. The volume of tumor in the therapeutic groups containing the MNPs significantly decreased compared to the others. Numerical analysis showed that the tumor volume in mice receiving Lip-MNPs-DOX was 9.29% that of the control and a histological examination of the tumor section showed 70% necrosis. Conclusion: The Lip-DOX-MNPs could be effective agents which reduce malignant skin tumors growth and increase cancer cell necrosis.