Rosette Morphology Research Articles

Exploring the complexities of plant UV responses; distinct effects of UV-A and UV-B wavelengths on Arabidopsis rosette morphology

UV-B radiation can substantially impact plant growth. To study UV-B effects, broadband UV-B tubes are commonly used. Apart from UV-B, such tubes also emit UV-A wavelengths. This study aimed to distinguish effects of different UV-B intensities on Arabidopsis thaliana wildtype and UVR8 mutant rosette morphology, from those by accompanying UV-A. UV-A promotes leaf-blade expansion along the proximal–distal, but not the medio-lateral, axis. Consequent increases in blade length: width ratio are associated with increased light capture. However, petiole length is not affected by UV-A exposure. This scenario is distinct from the shade avoidance driven by low red to far-red ratios, whereby leaf blade elongation is impeded but petiole elongation is promoted. Thus, the UV-A mediated elongation response is phenotypically distinct from classical shade avoidance. UV-B exerts inhibitory effects on petiole length, blade length and leaf area, and these effects are mediated by UVR8. Thus, UV-B antagonises aspects of both UV-A mediated elongation and classical shade avoidance. Indeed, this study shows that accompanying UV-A wavelengths can mask effects of UV-B. This may lead to potential underestimates of the magnitude of the UV-B induced morphological response using broadband UV-B tubes.Graphical abstract

Rosetta gen. nov. (Chlorophyta): Resolving the identity of red snow algal rosettes.

Thick-walled rosette-like snow algae were long thought to be a life stage of various other species of snow algae. Rosette-like cells have not been cultured, but by manually isolating cells from 38 field samples in southern British Columbia, we assigned a variety of rosette morphologies to DNA sequence. Phylogenetic analysis of Rubisco large-subunit (rbcL) gene, ribosomal internal transcribed spacer 2 (ITS2) rRNA region, and 18S rRNA gene revealed that the rosette-like cells form a new clade within the phylogroup Chloromonadinia. Based on these data, we designate a new genus, Rosetta, which comprises five novel species: R. castellata, R. floranivea, R. stellaria, R. rubriterra, and R. papavera. In a survey of 762 snow samples from British Columbia, we observed R. floranivea exclusively on snow overlying high-elevation glaciers, whereas R. castellata was observed at lower elevations, near the tree line. The other three species were rarely observed. Spherical red cells enveloped in a thin translucent sac were conspecific with Rosetta, possibly a developmental stage. These results highlight the unexplored diversity among snow algae and emphasize the utility of single-cell isolation to advance the centuries-old problem of disentangling life stages and cryptic species.

Morphometric analysis of the elasmobranch olfactory rosette.

The olfactory rosettes of elasmobranchs vary in shape and structure among species, but the functional consequences of this diversity are unresolved. Our goal was to quantify rosette morphology on dissected as well as diffusible iodine-based contrast-enhanced computed tomography (diceCT)-imaged specimens to analyze the drivers of observed trends in a phylogenetic context and compare the methodologies. We hypothesized that lamellar count and rosette shape (fineness ratio) would not scale with animal size, but other rosette size variables would scale positively. We dissected rosettes from 14 elasmobranch species and collected morphometric data (fineness ratio, lamellar count, interlamellar distance, lamellar thickness, and raphe width). A subset of rosettes (five species) wasused to analyze the effects of body size, while all 14 species were used for a phylogenetic principal component analysis (pPCA). We found that fineness ratio and lamellar counts varied significantly among species, and were positively correlated. The first two principal components of the pPCA explained 82% of the variation, with fineness ratio and lamellar count contributing most to the loadings, respectively.DiceCTwas used for in situ imaging of four species of Carcharhiniformes. There were no significant differences between rosette structure or volume when comparing values from dissected specimens to values from in situ specimens obtained using diceCT. We also quantified the volume of the excurrent channel in the olfactory capsule. These data add to our understanding of how olfactory organ shape varies among species and can be used to create three-dimensional models for future olfactory hydrodynamic studies.

Genetic architecture of variation in Arabidopsis thaliana rosettes.

Rosette morphology across Arabidopsis accessions exhibits considerable variation. Here we report a high-throughput phenotyping approach based on automatic image analysis to quantify rosette shape and dissect the underlying genetic architecture. Shape measurements of the rosettes in a core set of Recombinant Inbred Lines from an advanced mapping population (Multiparent Advanced Generation Inter-Cross or MAGIC) derived from inter-crossing 19 natural accessions. Image acquisition and analysis was scaled to extract geometric descriptors from time stamped images of growing rosettes. Shape analyses revealed heritable morphological variation at early juvenile stages and QTL mapping resulted in over 116 chromosomal regions associated with trait variation within the population. Many QTL linked to variation in shape were located near genes related to hormonal signalling and signal transduction pathways while others are involved in shade avoidance and transition to flowering. Our results suggest rosette shape arises from modular integration of sub-organ morphologies and can be considered a functional trait subjected to selective pressures of subsequent morphological traits. On an applied aspect, QTLs found will be candidates for further research on plant architecture.

Dissecting the Role of SAL1 in Metabolizing the Stress Signaling Molecule 3'-Phosphoadenosine 5'-Phosphate in Different Cell Compartments.

Plants possess the most highly compartmentalized eukaryotic cells. To coordinate their intracellular functions, plastids and the mitochondria are dependent on the flow of information to and from the nuclei, known as retrograde and anterograde signals. One mobile retrograde signaling molecule is the monophosphate 3′-phosphoadenosine 5′-phosphate (PAP), which is mainly produced from 3′-phosphoadenosine 5′-phosphosulfate (PAPS) in the cytosol and regulates the expression of a set of nuclear genes that modulate plant growth in response to biotic and abiotic stresses. The adenosine bisphosphate phosphatase enzyme SAL1 dephosphorylates PAP to AMP in plastids and the mitochondria, but can also rescue sal1 Arabidopsis phenotypes (PAP accumulation, leaf morphology, growth, etc.) when expressed in the cytosol and the nucleus. To understand better the roles of the SAL1 protein in chloroplasts, the mitochondria, nuclei, and the cytosol, we have attempted to complement the sal1 mutant by specifically cargoing the transgenic SAL1 protein to these four cell compartments. Overexpression of SAL1 protein targeted to the nucleus or the mitochondria alone, or co-targeted to chloroplasts and the mitochondria, complemented most aspects of the sal1 phenotypes. Notably, targeting SAL1 to chloroplasts or the cytosol did not effectively rescue the sal1 phenotypes as these transgenic lines accumulated very low levels of SAL1 protein despite overexpressing SAL1 mRNA, suggesting a possibly lower stability of the SAL1 protein in these compartments. The diverse transgenic SAL1 lines exhibited a range of PAP levels. The latter needs to reach certain thresholds in the cell for its impacts on different processes such as leaf growth, regulation of rosette morphology, sulfate homeostasis, and glucosinolate biosynthesis. Collectively, these findings provide an initial platform for further dissection of the role of the SAL1–PAP pathway in different cellular processes under stress conditions.

Effect of Rotating Magnetic Field on Microstructure in AlCuSi Alloys

The solidification of AlCuSi alloys with Mn and Fe was studied by rotating a magnetic field to understand the effect of melt flow. The specimens solidified with a forced convection, low cooling rate and low temperature gradient. Electromagnetic stirring generated by an electric coil around the specimens caused a transformation from equiaxed dendritic to rosette morphology, occasionally with spheroids and minor dendrites. The transformation was quantitatively observed with a specific surface Sv, that decreased for almost all alloys and marked the flow effect on α-Al. The computer coupling of phase diagrams and thermochemistry (CALPHAD) technique was applied for the calculation of phase diagrams and property diagrams. Forced convection decreased secondary dendrite arm spacing λ2 in almost all alloys, while it increased slightly in one studied alloy. The length of detrimental β-Al5FeSi phases decreased in the alloy, where β starts to precipitate in the presence of α-Al, while increasing in alloys where β starts as first and grows in the fully liquid melt. The average overall dimension of the Mn-rich phases increased in almost all alloys, and the number density decreased under flow. The modification of spacing for AlSi-eutectics and Al2Cu was analyzed. It was found that the occurrence of Al2Cu does not influence the fluid flow and vice versa.

Producing Enhanced Yield and Nutritional Pigmentation in Lollo Rosso Through Manipulating the Irradiance, Duration, and Periodicity of LEDs in the Visible Region of Light.

Pigmented food are an important part of the human diet, and anthocyanins have demonstrable protection against tumor production in mouse models and beneficial effects on human liver chemistry. As such, producing pigmented crops is important for a nutritionally diverse diet. Lollo rosso lettuce is a fast-growing pigmented plant, is rich in phenolic compounds, and represents a suitable system to test optimization strategies for yield and anthocyanin production. High-energy UV wavebands are often used to stimulate increased pigmentation; however, we hypothesized that optimizing visible wavebands would deliver both yield and quality improvements. Growing Lollo rosso under irradiances between 5 and 180 W m–2 using visible waveband LEDs produced 0.4 g fresh weight per W m–2 in the linear portion of the curve between 5 and 40 W m–2 and achieved an approximate asymptote of 20 g fresh weight at around 100–120 W m–2 for yield. Anthocyanin content increased linearly with irradiance. We attempted to optimize the visible wavebands by supplementing half the asymptotic energy for 15 days with supplemental red (R) or blue (B) wavebands in the peaks of photosynthetic activity (430–460 and 630–660 nm). R and B affected rosette morphology with no significant impact on yield, but B significantly increased anthocyanin content by 94% compared to R. We therefore focused on further optimizing B by shortening the daily duration of supplemental B. The minimum B treatment that lacked significant pigment induction was 1 h. We hypothesized that short durations would be more active at different times in the diurnal cycle. Supplemental B was applied for 2 h at four different times. A night-break with B produced the highest yield and anthocyanin content. Our research demonstrates new ways to efficiently use readily available LEDs within the PAR wavebands to increase both yield and crop quality in controlled environment agriculture.

Characterization of glycogen molecular structure in the worm Caenorhabditis elegans

Glycogen, a glucose homopolymer with many glucose chains, is the primary blood-sugar reservoir in many organisms. It comprises β particles (∼20 nm) which can bind together to form large α particles with a rosette morphology. When dimethyl sulfoxide (DMSO) is added to glycogen from diabetic livers, α particles break apart to β particles (‘fragility’), possibly due to H-bond disruption; this is not seen in healthy livers. Glycogen α and β particles, and α-particle fragility, are observed in mammals and bacteria, and are examined here in the worm Caenorhabditis elegans, with glycogen from two C. elegans strains, cultured in normal and high-glucose conditions. There were mainly β particles, with some large α particles. Most particles were fragile in DMSO. Growing in a high-glucose medium results in more long chains and more fragility, consistent with previous observations in diabetic animal models. Why high glucose levels facilitate fragility is worthy of further investigation.

Differentiation of neural rosettes from human pluripotent stem cells in vitro is sequentially regulated on a molecular level and accomplished by the mechanism reminiscent of secondary neurulation

Development of neural tube has been extensively modeled in vitro using human pluripotent stem cells (hPSCs) that are able to form radially organized cellular structures called neural rosettes. While a great amount of research has been done using neural rosettes, studies have only inadequately addressed how rosettes are formed and what the molecular mechanisms and pathways involved in their formation are. Here we address this question by detailed analysis of the expression of pluripotency and differentiation-associated proteins during the early onset of differentiation of hPSCs towards neural rosettes. Additionally, we show that the BMP signaling is likely contributing to the formation of the complex cluster of neural rosettes and its inhibition leads to the altered expression of PAX6, SOX2 and SOX1 proteins and the rosette morphology. Finally, we provide evidence that the mechanism of neural rosettes formation in vitro is reminiscent of the process of secondary neurulation rather than that of primary neurulation in vivo. Since secondary neurulation is a largely unexplored process, its understanding will ultimately assist the development of methods to prevent caudal neural tube defects in humans.

Modelling of the microstructure formation during solidification of binary alloy Al–Si under stirring

The growth of primary crystals from a supercooled binary melt is modeled on the basis of the phase-field method with an approximate consideration for melt stirring. Changes in the concentration of the solute in the melt near the solidification region due to stirring are considered as the main reason for modifying the dendritic morphology of the crystals. The stirring effect results in a partial removal of the melt with an increased solute concentration from the region near the interface, which is called washout in the work. This effect is approximately modeled as a forced periodic replacement of the current high solute concentration in this region either at the initial concentration or at the averaged concentration in the melt. In this paper, we propose a new algorithm for choosing such a correction region, which can be used for a small intensity of stirring. A value is introduced to describe the washout intensity-the washout parameter. It is shown that when washed away dendritic morphology passes into a rosette morphology, depending on the intensity of stirring. A numerical analysis of the growth of perturbations on the surface of the initial embryo of a circular crystal is carried out. The main differences in the development of such perturbations are shown, which leads to a non-dendritic morphology of the crystal. The growth of additional branches is demonstrated due to a decrease in the solute concentration near the center of the crystal. Calculations have been performed for the case of crystal growth with a decrease in washout intensity with growth time. For this case, the secondary arms grow on additional branches growing from the center of the crystal. It is shown that at a constant value of the washout intensity near the surface of a growing crystal, only two types of morphology are possible from a small round embryo, dendritic and rosette. At the same time, if the crystal already has a rosette morphology, it is retained and with its further growth with a decrease in the washout intensity.

A kinase-dead version of FERONIA receptor-like kinase has dose-dependent impacts on rosette morphology and RALF1-mediated stomatal movements.

The receptor-like kinase FERONIA (FER) pleiotropically affects plant reproduction, development, and stress tolerance. We recently showed that the FER ligand RALF1 promotes stomatal closure and inhibits stomatal opening in a G-protein-dependent manner. FER responses have been designated as kinase-dependent or kinase-independent, based largely on fer complementation assays employing a kinase-dead FERK565R. Our quantification of FERK565R-GFP transcript and FERK565R-GFP protein in fer complementation lines reveal that, even within individual complementation lines, different levels of FERK565R expression prevail. FERK565R-GFP expression comparable to that of FER in Col-0 plants fail to elicit complementation of either fer rosette phenotypes or RALF1-elicited stomatal movements, whereas overexpression levels of FERK565R-GFP result in complementation. These results suggest possible alternative interpretations of previous conclusions regarding kinase-independent FER signaling.

Effects of natural solar UV-B radiation on three Arabidopsis accessions are strongly affected by seasonal weather conditions

Large numbers of studies have reported on the responses of plants that are exposed to a specific dose of ultraviolet-B (UV-B) radiation. However, in the natural environment UV-B is a highly dynamic variable with UV-B intensities depending on, amongst others, geographic, temporal, weather and climatic factors. Furthermore, UV-B effects on plants can potentially be modulated by other environmental variables, and vice versa. This study aimed to characterize UV-B effects on plant morphology and accumulation of UV-screening pigments within the context of an oceanic climate and to assess the potential seasonality of plant UV-B responses. Arabidopsis thaliana was grown outdoors under UV-blocking or transmitting filters. Genotypic differences in the adaptive response to UV-B were assessed at seven time-points over a 12 month period and involved the Arabidopsis accessions Ler, Col-0, and Bur-0. Strong seasonal effects were found on rosette morphology and total UV-screening pigment concentrations across the three accessions. Low temperatures were the main determinant of accumulation of UV-absorbing pigments, with no clear UV-B effect observed at any time throughout the year. There was a significant UV effect on morphology during the summer months, and this was most likely associated with stress. This study shows that UV-effects need to be analysed in the context of weather, and other co-occurring natural factors, and emphasizes the importance of a holistic, multifactorial approach for the investigation of environmentally relevant UV-effects.

Development of strategies for genetic manipulation and fine-tuning of a chloroplast retrograde signal 3'-phosphoadenosine 5'-phosphate.

Homeostasis of metabolism and regulation of stress‐signaling pathways are important for plant growth. The metabolite 3′‐phosphoadenosine‐5′‐phosphate (PAP) plays dual roles as a chloroplast retrograde signal during drought and high light stress, as well as a toxic by‐product of secondary sulfur metabolism, and thus, its levels are regulated by the chloroplastic phosphatase, SAL1. Constitutive PAP accumulation in sal1 mutants improves drought tolerance but can impair growth and alter rosette morphology. Therefore, it is of interest to derive strategies to enable controlled and targeted PAP manipulation that could enhance drought tolerance while minimizing the negative effects on plant growth. We systematically tested the potential and efficiency of multiple established transgenic manipulation tools in altering PAP levels in Arabidopsis. Dexamethasone (dex)‐inducible silencing of SAL1 via hpRNAi [pOpOff:SAL1hpRNAi] yielded reduction in SAL1 transcript and protein levels, yet failed to significantly induce PAP accumulation. Surprisingly, this was not due to insufficient silencing of the inducible system, as constitutive silencing using a strong promoter to drive hpRNAi and amiRNA targeting the SAL1 transcript also failed to increase PAP content or induce a sal1‐like plant morphology despite significantly reducing the SAL1 transcript levels. In contrast, using dex‐inducible expression of SAL1 cDNA to complement an Arabidopsis sal1 mutant successfully modulated PAP levels and restored rosette growth in a dosage‐dependent manner. Results from this inducible complementation system indicate that plants with intermediate PAP levels could have improved rosette growth without compromising its drought tolerance. Additionally, preliminary evidence suggests that SAL1 cDNA driven by promoters of genes expressed specifically during early developmental stages such as ABA‐Insensitive 3 (ABI3) could be another potential strategy for studying and optimizing PAP levels and drought tolerance while alleviating the negative impact of PAP on plant growth in sal1. Thus, we have identified ways that can allow future dissection into multiple aspects of stress and developmental regulation mediated by this chloroplast signal.

Stem elongation of ornamental bromeliad in tissue culture depends on the temperature even in the presence of gibberellic acid

Acanthostachys strobilacea Link, Klotzsch, & Otto is an ornamental bromeliad native to Brazilian Atlantic Forest that naturally exhibits a rosette growth pattern. According to the temperature conditions of the in vitro culture, this species can exhibit stem elongation, facilitating the isolation of the nodal segments to be applied in its micropropagation. The rosette morphology is reestablished when this species is maintained under low temperature, thus allowing the maintenance of a germplasm collection (slow growth storage). Gibberellins (GA) are usually applied to stimulate stem elongation in micropropagated plants. Thus, our aim here was to verify the influence of temperature over the stem elongation of A. strobilacea when GA3 is applied to the medium, thus estimating the use of this phytoregulator in slow growth cultures at low temperatures. Physiological and anatomical studies were performed on plants obtained from nodal segments maintained at 10, 15, 20, and 25 °C. Regardless of the applied treatment, no segments developed at 10 °C. Stem elongation occurred at 25 and 30 °C, and was not seen for plants grown under 15 and 20 °C. The application of 50 µM of GA3 restored stem elongation in plants at 20 but not at 15 °C. The influence of gibberellins on stem elongation of this tropical bromeliad depends on the cultivation temperature, in which low temperature preponderates over the stem elongation effects of GA3. In addition, the optimum temperature for the slow growth of this species depends on the starting temperature of the explant used in the micropropagation.

Microstructural Evolution in AlMgSi Alloys during Solidification under Electromagnetic Stirring

Equiaxed solidification of AlMgSi alloys with Fe and Mn was studied by electromagnetic stirring to understand the effect of forced flow. The specimens solidified with a low cooling rate, low temperature gradient, and forced convection. Stirring induced by a coil system around the specimens caused a transformation from equiaxed dendritic to rosette morphology with minor dendrites and, occasionally, spheroids. This evolution was quantitatively observed with specific surface Sv. The precipitation sequence of the phases was calculated using the CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry) technique. Melt flow decreased secondary dendrite arm spacing λ2 in the AlSi5Fe1.0 alloy, while λ2 increased slightly in Mg-containing alloys. The length of detrimental β-Al5FeSi phases decreased only in AlSi5Fe1.0 alloy under stirring, whereas in Mg-containing alloys, changes to the β-Al5FeSi phase were negligible; however, in all specimens, the number density increased. The modification of Mn-rich phases, spacing of eutectics, and Mg2Si phases was analyzed. It was found that the occurrence of Mg2Si phase regions reduced fluid flow in the late stages of solidification and, consequentially, reduced shortening of β-Al5FeSi, diminished secondary arm-ripening caused by forced convection, and supported diffusive ripening. However, the Mg2Si phase was found to have not disturbed stirring in the early stage of solidification, and transformation from dendrites to rosettes was unaffected.

Weed response and crop growth in winter wheat–lucerne intercropping: a comparison of conventional and reduced soil-tillage conditions in northern France

Changing agricultural practices from conventional to conservation tillage generally leads to increased weed populations and herbicide use. To gain information about the possible use of lucerne (Medicago sativa L.) cover crop as an alternative and sustainable weed-control strategy for winter wheat (Triticum aestivum L.), an experiment was performed at Thiverval-Grignon, France, from 2008 to 2010. We compared conventional and reduced tillage as well as the presence and absence of living mulch (i.e. lucerne) on weeds and wheat production. Percentage soil coverage and aboveground biomass of wheat, lucerne and weeds were measured at the end of grain filling. Weed communities were analysed in terms of composition and diversity. During both seasons, wheat biomass did not significantly decrease in reduced-till trials compared with conventional ones (7.0 and 7.2 t ha–1, respectively, in 2008–09; 6.9 and 7.1 t ha–1 in 2009–10). Regardless of soil management, the percentage soil coverage by wheat significantly decreased when it was intercropped, although wheat biomass was not significantly reduced compared with the sole crop. To minimise cash-crop losses, we studied the competition between wheat, lucerne and weeds, testing various herbicide strategies. Early control of lucerne allowed better balance between weed control and wheat development. In addition, weed communities varied among treatments in terms of abundance and composition, being reduced but more varied in plots associated with lucerne. A functional group analysis showed that grasses benefited from reduced-till conditions, whereas problematic weeds such as annuals with creeping and climbing morphologies were substantially reduced. In addition, annual and perennial broad-leaf species with rosette morphology were also significantly decreased when lucerne was used as living mulch. Wheat production in reduced-till conditions intercropped with lucerne living mulch may be useful for integrated weed management, reducing the need for herbicides.

Unraveling deformation mechanisms around FCC and BCC nanocontacts through slip trace and pileup topography analyses

Nanocontact loadings offer the potential to investigate crystal plasticity from surface slip trace emissions and distinct pileup patterns where individual atomic terraces arrange into hillocks and symmetric rosettes. Our MD simulations in FCC Cu and Al nanocontacts show development of specific dislocation interception, cross-slip and twin annihilation mechanisms producing traces along characteristic <011> and <112> directions. Although planar slip is stabilized through subsurface dislocation interactions, highly serrated slip traces always predominate in Al due to the advent of cross-slip of the surfaced population of screw dislocations, leading to intricate hillock morphologies. We show that the distinct wavy hillocks and terraces in BCC Ta and Fe nanocontacts are due to dislocation double-kinking and outward spreading of surfaced screw segments, which originate from dislocation loops induced by twin annihilation and twin-mediated nucleation processes in the subsurface. Increasing temperature favors terrace formation in BCCs whereas the enhancement of surface decorations in FCCs limits hillock definition. It is found that material bulging against the indenter-tip is a distinctive feature in nanocontact plasticity associated with intermittent defect bursts. Bulging is enhanced by recurrent slip traces introduced throughout the contact surface, as in the case of the strongly linear defect networks in FCC Al, and by specific twin arrangements at the vicinity of BCC nanocontacts. Defect patterning also produces surface depressions in the form of vertexes around FCC nanoimprints. While the rosette morphologies are consistent with those assessed experimentally in greater FCC and BCC imprints, local bulging promoted during tip removal becomes more prominent at the nanoscale.

Characterisation of lead barium zirconate thin films for utilisation of the electrocaloric effect

Characterisation of a composition of Lead Barium Zirconate thin films deposited by a spin coating sol-gel process onto platinised silicon substrates has been undertaken to investigate a potential application utilising the reported electrocaloric properties of the material. Xray diffraction studies revealed that above 700 °C the presence of pyrochlore phase was replaced by ferroelectric phase but the identification of antiferroelectric phases previously reported could not be identified. Wet etching of the films produced an insoluble residue containing only evidence of zirconium out of the original three metals, which resembled a skeletal structure similar to the original rosette morphology of the annealed films. Elemental analysis of the annealed films using EDX indicated a non-target Pb:Ba:Zr ratio, which suggested a reduced Zr content of the films. “Solution-like” rather than “sol-like” nature of the spin coated sol and phase boundary proximity are proposed for reported observations, and a mechanism is proposed to account for the unusual observed trend in dielectric constant.

A recipe for the synthesis of diorganotin(iv) phosphonates in a colloidal regime by a solution based approach

Tin(iv) based coordination polymers bearing silaalkyl substituted phosphonate ligands adopt rod, rosette and spherical-shaped morphologies. The particle size can be modulated into a nano/colloidal regime by a solution based approach.

Direct reprogramming of porcine fibroblasts to neural progenitor cells

Direct reprogramming of porcine fibroblasts to neural progenitor cells