Role In Protein Adsorption Research Articles

Chirality and Curvature on Protein Adsorption and Osteogenesis

AbstractHere we designed enantiomeric lipid‐mimetic glutamic acid derivatives (L/D‐UG) and investigated their self‐assembled chiral nanostructures’ interaction with the protein adsorption as well as the osteogenesis. It was found that L or D‐UG molecules can self‐assemble into vesicle bilayers and two‐dimensional (2D) nanocrystals via a kinetic and thermodynamic control, respectively. These chiral vesicles and 2D crystals showed differentiated adsorption of proteins, determined by their curvature and chirality. Specifically, fibronectin constituted by L‐amino acids adsorbed preferentially on L‐UG 2D crystal in a semi‐random pattern and L‐2D nanocrystal show as the most effective structures to promote bone regeneration. The controlled vesicle and 2D crystal assemblies with different chirality and curvature helps to clarify their determine roles in protein adsorption and osteogenesis.

Chirality and Curvature on Protein Adsorption and Osteogenesis.

Here we designed enantiomeric lipid-mimetic glutamic acid derivatives (L/D-UG) and investigated their self-assembled chiral nanostructures' interaction with the protein adsorption as well as the osteogenesis. It was found that L or D-UG molecules can self-assemble into vesicle bilayers and two-dimensional (2D) nanocrystals via a kinetic and thermodynamic control, respectively. These chiral vesicles and 2D crystals showed differentiated adsorption of proteins, determined by their curvature and chirality. Specifically, fibronectin constituted by L-amino acids adsorbed preferentially on L-UG 2D crystal in a semi-random pattern and L-2D nanocrystal show as the most effective structures to promote bone regeneration. The controlled vesicle and 2D crystal assemblies with different chirality and curvature helps to clarify their determine roles in protein adsorption and osteogenesis.

Computational Characterization of Mechanical, Hemodynamic, and Surface Interaction Conditions: Role of Protein Adsorption on the Regenerative Response of TEVGs.

Currently available small diameter vascular grafts (<6 mm) present several long-term limitations, which has prevented their full clinical implementation. Computational modeling and simulation emerge as tools to study and optimize the rational design of small diameter tissue engineered vascular grafts (TEVG). This study aims to model the correlation between mechanical-hemodynamic-biochemical variables on protein adsorption over TEVG and their regenerative potential. To understand mechanical-hemodynamic variables, two-way Fluid-Structure Interaction (FSI) computational models of novel TEVGs were developed in ANSYS Fluent 2019R3® and ANSYS Transient Structural® software. Experimental pulsatile pressure was included as an UDF into the models. TEVG mechanical properties were obtained from tensile strength tests, under the ISO7198:2016, for novel TEVGs. Subsequently, a kinetic model, linked to previously obtained velocity profiles, of the protein-surface interaction between albumin and fibrinogen, and the intima layer of the TEVGs, was implemented in COMSOL Multiphysics 5.3®. TEVG wall properties appear critical to understand flow and protein adsorption under hemodynamic stimuli. In addition, the kinetic model under flow conditions revealed that size and concentration are the main parameters to trigger protein adsorption on TEVGs. The computational models provide a robust platform to study multiparametrically the performance of TEVGs in terms of protein adsorption and their regenerative potential.

Superamphiphilic TiO2 Composite Surface for Protein Antifouling.

Unwanted protein adsorption deteriorates fouling processes and reduces analytical device performance. Wettability plays an important role in protein adsorption by affecting interactions between proteins and surfaces. However, the principles of protein adsorption are not completely understood, and surface coatings that exhibit resistance to protein adsorption and long-term stability still need to be developed. Here, a nanostructured superamphiphilic TiO2 composite (TiO2 /SiO2 ) coating that can effectively prevent nonspecific protein adsorption on water/solid interfaces is reported. The confined water on the superamphiphilic surface enables a low adhesion force and the formation of an energy barrier that plays a key role in preventing protein adsorption. This adaptive design protects the capillary wall from fouling in a harsh environment during the bioanalysis of capillary electrophoresis and is further extended to applications in multifunctional microfluidics for liquid transportation. This facile approach is not only perfectly applied in channels with complicated configurations but may also offer significant insights into the design of advanced superwetting materials to control biomolecule adhesion in biomedical devices, microfluidics, and biological assays.

Interaction of graphene oxide with cell culture medium: Evaluating the fetal bovine serum protein corona formation towards in vitro nanotoxicity assessment and nanobiointeractions

The interaction of single-layer graphene oxide (SLGO) and multi-layered graphene oxide (MLGO) with a cell culture medium (i.e. DMEM) was studied by evaluating fetal bovine serum (FBS) protein corona formation towards in vitro nanotoxicity assessment and nanobiointeractions. SLGO and MLGO exhibited different colloidal behavior in the culture medium, which was visualized by cryogenic transmission electron microscopy in situ analysis. Exploring proteomics and bioinformatics tools, 394 and 290 proteins were identified on the SLGO and MLGO hard corona compositions, respectively. From this amount, 115 proteins were exclusively detected on the SLGO and merely 11 on MLGO. SLGO enriched FBS proteins involved in metabolic processes and signal transduction, while MLGO enriched proteins involved in cellular development/structure, and lipid transport/metabolic processes. Such a distinct corona profile is due to differences on surface chemistry, aggregation behavior and the surface area of GO materials. Hydrophilic interactions were found to play a greater role in protein adsorption by MLGO than SLGO. Our results point out implications for in vitro studies of graphene oxide materials concerning the effective dose delivered to cells and corona bioactivity. Finally, we demonstrated the importance of integrating conventional and modern techniques thoroughly to understand the GO-FBS complexes towards more precise, reliable and advanced in vitro nanotoxicity assessment.

Role of protein adsorption in the bio corrosion of metallic implants – A review

Implants are exposed to a complex physiological environment that contains various organic compounds, especially proteins. The adsorption of proteins has an immense influence on the corrosion, biocompatibility and wear properties of implantable metals. Proteins engage in multiple processes that could potentially inhibit or promote metal degradation, depending on the type of proteins, their concentration and the properties of the implant material. In the bio corrosion process, proteins are denatured and transform into a film on the metal surface, inhibiting corrosion. This film is found on many retrieved artificial joints, especially on worn areas, and can protect the passive film from scrapping due to its lubricating effect, thus decreasing tribocorroion. On the other hand, the interactions of metal ions with proteins (and amino acids) create colloidal organometallic complexes. Transport of the complex compounds away from the interface increases dissolution rates; thus, it accelerates the corrosion of metallic implants. The influence of protein adsorption on the corrosion behaviour of metallic biomaterials is presented in this review. Biocompatible metals that are favourably used as implants such as stainless steel, Co-Cr alloys, Ti alloys and biodegradable Mg and Fe alloys are specifically addressed. We have highlighted the adsorption phenomenon of protein on metallic implants, the interaction of proteins with metallic implants and the role of protein adsorption on implant biocorrosion behaviour as well as their wear resistance.

Controllable immobilization of proteins in quenched spherical polyelectrolyte brushes as observed by fluorescence spectroscopy and small angle X‐ray scattering

ABSTRACTThe immobilization of lysozymes (pI = 11) onto anionic spherical polyelectrolyte brushes (SPB) which consist of a solid polystyrene core and a densely grafted poly(styrene sulfonate) (PSS) shell was systematically studied by fluorescence spectroscopy and small angle X‐ray scattering. Results show that the capture of lysozyme by PSS brush is a dynamic process, which involves a quick agglomeration stage and a slow rearrangement one. And lysozyme inclines to immobilize in the inner layer of the brush, and saturation of lysozyme adsorption onto the SPB is gradually reached as the protein concentration increases, proceeding from the inside to the outside of the brush layers. As increasing the pH and ionic strength, the lysozyme previously adsorbed will be partially released and migrate from the inner to the outer layer of SPB. Last competitive adsorption tests between lysozyme and BSA or β‐glucosidase were performed, indicating that besides electrostatic interaction counterion release force also plays an important role in protein adsorption. SPB was proved to be ideal candidate for controllable immobilization of protein, which can be extended into various applications, such as drug delivery and protein separation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018, 56, 1577–1588

Effect of Oil Hydrophobicity on the Adsorption and Rheology of β-Lactoglobulin at Oil-Water Interfaces.

The adsorption of protein layers at oil-water interfaces is critical to the formation and stability of various emulsions in, for example, technical applications as well as in biological lipid storage. Effects of ionic strength, pH, temperature, and pretreatments of the proteins are well-known. However, the oil phase has been regarded as exchangeable and its role in protein adsorption has been widely ignored. Herein, the influence of systematically selected oil interfaces of high purity on the formation and properties of β-lactoglobulin (β-lg) adsorption layers was evaluated. Droplet profile tensiometry and interfacial rheometry were employed to determine the adsorption kinetics and dilatational and interfacial shear moduli. We show that depending on the molecular size, flexibility, hydrophobicity, polarity, and polarizability of the oils, globular proteins adsorb distinctively. Stronger interactions of polar oils with the hydrophilic exterior of the native β-lg lead to decelerated protein unfolding. This results in lower surface pressures and slower formation of viscoelastic networks. In addition, polar oils interact stronger with the protein network by hydrophilic bonding and thereby act as softening agents. The observed effects of hydrophobic subphases on the adsorbed protein layers provide knowledge, which promotes higher reproducibility in rheological studies and precise tailoring of interfacial films for enhanced formation and stability of emulsions.

Protein-Glass Surface Interactions and Ion Desalting in Electrospray Ionization with Submicron Emitters.

Theta glass electrospray emitters can rapidly mix solutions to investigate fast reactions that occur as quickly as 1μs, but emitters with submicron tips have the unusual properties of desalting protein ions and affecting the observed abundances of some proteins as a result of protein-surface interactions. The role of protein physical properties on ion signal was investigated using 1.7 ± 0.1 μm and 269 ± 7 nm emitters and 100 mM aqueous ammonium acetate or ammonium bicarbonate solutions. Protein ion desalting occurs for both positive and negative ions. The signal of a mixture of proteins with the 269 nm tips is time-dependent and the order in which ions of each protein is observed is related to the expected strengths of the protein-surface interactions. These results indicate that it is not just the high surface-to-volume ratio that plays a role in protein adsorption and reduction or absence of initial ion signal, but the small diffusion distance and extremely low flow rates of the smaller emitters can lead to complete adsorption of some proteins and loss of signal until the adsorption sites are filled and the zeta potential is significantly reduced. After about 30 min, signals for a protein mixture from the two different size capillaries are similar. These results show the advantages of submicron emitters but also indicate that surface effects must be taken into account in experiments using such small tips or that coating the emitter surface to prevent adsorption should be considered. Graphical Abstract.

Characterization of poly(allylamine) as a polymeric ligand for ion-exchange protein chromatography

This work reports poly(allylamine) (PAA), as a polymeric ion-exchange ligand for protein chromatography. Sepharose FF was modified with PAA, and six anion exchangers with ionic capacities (ICs) from 165 to 618mmol/L were prepared. Inverse size exclusion chromatography, adsorption equilibrium, uptake kinetics and column elution were performed. It was found that both the adsorption capacity and effective diffusivity maintained low values in the IC range of 165–373mmol/L, but they started to increase beyond 373mmol/L, and increased by 80% and 23 times, respectively, when the IC reached 618mmol/L. Interestingly, a drastic decrease of pore size was observed around the IC of 373mmol/L. The results suggest that the PAA chains played an important role in protein adsorption by altering the inner pore structure of the gels. It is considered that, PAA chains turn from inextensible states with multipoint-grafting on the pore surface at low coupling densities (IC<373mmol/L) to closer, extended and flexible grafting states with less coupling points at higher coupling densities (IC>373mmol/L). These characters of the grafted chains at higher IC values benefit in protein adsorption by three-dimensional binding and encouraged the happening of “chain delivery” of bound proteins on the chains. Besides, the ion exchangers showed favorable adsorption and uptake properties in a wide ionic strength range, 0–500mmol/L NaCl, indicating much better salt tolerance feature than the so-far reported ion exchangers. Moreover, a mild condition of pH 5.0 offered effective recovery of bound proteins in elution chromatography. The results indicate that the PAA-based anion exchanger of a high IC value is promising for high-capacity protein chromatography dealing with feedstock of a wide range of ionic strengths.

Engineered, Robust Polyelectrolyte Multilayers by Precise Control of Surface Potential for Designer Protein, Cell, and Bacteria Adsorption.

Cross-linked layer-by-layer (LbL) assemblies with a precisely tuned surface ζ-potential were fabricated to control the adsorption of proteins, mammalian cells, and bacteria for different biomedical applications. Two weak polyions including a synthesized polyanion and polyethylenimine were assembled under controlled conditions and cross-linked to prepare three robust LbL films as model surfaces with similar roughness and water affinity but displaying negative, zero, and positive net charges at the physiological pH (7.4). These surfaces were tested for their abilities to adsorb proteins, including bovine serum albumin (BSA) and lysozyme (LYZ). In the adsorption tests, the LbL films bind more proteins with opposite charges but less of those with like charges, indicating that electrostatic interactions play a major role in protein adsorption. However, LYZ showed higher nonspecific adsorption than BSA, because of the specific behavior of LYZ molecules, such as stacked multilayer formation during adsorption. To exclude such stacking effects from experiments, protein molecules were covalently immobilized on AFM colloidal probes to measure the adhesion forces against the model surfaces utilizing direct protein molecule-surface contacts. The results confirmed the dominating role of electrostatic forces in protein adhesion. In fibroblast cell and bacteria adhesion tests, similar trends (high adhesion on positively charged surfaces, but much lower on neutral and negatively charged surfaces) were observed because the fibroblast cell and bacterial surfaces studied possess negative potentials. The cross-linked LbL films with improved stability and engineered surface charge described in this study provide an excellent platform to control the behavior of different charged objects and can be utilized in practical biomedical applications.

Effect of Physicochemical Surface Modifications on Bovine Serum Albumin Adsorption to Tetragonal Zirconia Polycrystal in vitro Through the change of the Zeta Potential.

The technology of physicochemical surface modification is available for enhancing the bioactivity and osseointegration capability of tetragonal zirconia polycrystal (TZP). Hydrophobicity index and electrical charge play important roles in protein adsorption. We previously studied the mechanism underlying the adsorption of bovine serum albumin (BSA) on the surfaces of dental materials and hydroxyapatite in vitro. The aim of the present study was to clarify the correlation among the adsorption of BSA to TZP and physicochemically modified TZP surfaces and the zeta potential of BSA and TZP. We used TZP that was sintered at 1350°C for 2 h in air because this kind of TZP is widely applied in the field of dentistry. Surface physicochemistry was modified with ultraviolet light (UV) and atmospheric-pressure plasma treatment. The zeta potentials were measured with ELSZ-1000 and ELSZ-2000 analyzers (Otsuka Electronics, Hirakata, Japan). All experiments were conducted in 10 mM NaCl (pH 7.0). The zeta potentials of as-received TZP and BSA were negative, but those of UV- and plasma-treated TZP were positive. The reason the zeta potentials of TZP changed positive by physicochemical modification is due to an increase in the amount of basic hydroxyl groups. The zeta potentials of UV- and plasma-treated TZP after BSA adsorption were negative. These results suggested that electrostatic interactions play an important role in BSA adsorption to TZP and modified TZP surfaces, so that this modified surface may control the adsorption of protein.

Role of Interfacial Water in Protein Adsorption onto Polymer Brushes as Studied by SFG Spectroscopy and QCM

The adsorption of large biomolecules such as proteins is of high relevance in medicine; adsorbed proteins can initiate undesirable biological reactions such as blood coagulation or immune responses, which adversely affect the human body and the functioning of medical devices. Thus, the suppression of protein adsorption onto material surfaces is essential for medical and biomedical applications. Interfacial water molecules may play a key role in protein adsorption. In this context, in this study, we prepare various types of surfaces (hydrophobic, hydrophilic, anionic, cationic, and zwitterionic) using polymer brushes with different molecular structures. We analyze the adsorption of negatively and positively charged proteins using a quartz crystal microbalance (QCM) to quantitatively investigate protein adsorption onto the polymer brush surfaces. The structure of the interface between the polymer brushes and water media is investigated using sum frequency generation (SFG) spectroscopy. Our comparison of the...

Protein adsorption to poly(ethylenimine)-modified Sepharose FF: III. Comparison between different proteins

Previously, we studied bovine serum albumin (BSA) uptake to poly(ethylenimine) (PEI)-grafted Sepharose resins, and an ionic capacity (IC) range (600–740mmol/L) for steep increases of both protein capacity (qm) and effective pore diffusion coefficient (De) was found. In this work, seven PEI-grafted Sepharose FF resins at IC range of 270–1030mmol/L were synthesized to investigate the effect of protein properties on the adsorption and uptake kinetics using BSA and γ-globulin as two model proteins. For BSA, the change trends of qm and De values with IC were well consistent with the previous results. For γ-globulin, the qm values increased slowly till reaching a maximum value at IC=560mmol/L and then decreased rapidly at IC>560mol/L. The De values nearly kept unchanged at low ICs (IC<460mmol/L), and increased steeply at IC>460mmol/L till reaching a maximum at 680mmol/L (De/D0=0.48±0.01). After that increase, the De values for γ-globulin dropped quickly at IC>680mol/L, which was not observed for BSA. It is interesting to note that in the narrow IC range of 460–680mmol/L, the De values of γ-globulin increased dramatically for more than four folds. Moreover, it is notable that the IC range where the hopping of De values occurred for γ-globulin was earlier than that for BSA (460 vs. 560mmol/L). The earlier hopping of γ-globulin uptake rate was attributed to its larger size and less net charge, which facilitated the happenings of the “chain delivery” effect. The quick drops of both qm and De values for γ-globulin at IC>680mmol/L were considered due to its large size, which led to the significant decrease of its effective pore volume. The results indicate that both PEI layer and protein size played important roles in protein adsorption to PEI-grafted resins, and further prove the “chain delivery” effect did contributed significantly to the uptake rate hopping in the PEI-grafted resins. This work could also help the design and selection of resins based on protein characteristics and benefit optimization of practical chromatographic processes for therapeutic proteins with PEI-grafted anion exchangers.

Protein adsorption to poly(ethylenimine)-modified Sepharose FF: I. A critical ionic capacity for drastically enhanced capacity and uptake kinetics

To explore the details of protein uptake to polymer-grafted ion exchangers, Sepharose FF was modified with poly(ethylenimine) (PEI) to prepare anion exchanger of 10 different ionic capacities (ICs, 100–1220mmol/L). Adsorption equilibria and kinetics of bovine serum albumin (BSA) were then studied. It is found that ionic capacity, i.e., the coupling density of PEI, had significant effect on both adsorption capacity (qm) and effective protein diffusivity (De). With increasing ionic capacity, the qm value increased rapidly at IC<260mmol/L and then increased slowly till reaching a plateau at IC=600mmol/L. In the IC range of 100–600mmol/L, however, the De values kept at a low level (De/D0<0.07); it first decreased from 0.05±0.01 at IC=100mmol/L to 0.01±0.01 at IC=260mmol/L and then increased to 0.06±0.01 at IC=600mmol/L. Thereafter, sharp increases of the qm and De values [36% (from 201 to 273mg/mL) and 670% (from 0.06±0.01 to 0.49±0.04), respectively] were observed in the narrow range of IC from 600 to 740mmol/L. Finally, at IC>740mmol/L, the qm value decreased significantly while the De value increased moderately with increasing the IC. The results indicate that PEI chains played an important role in protein adsorption and transport. In brief, there was a critical IC (cIC) or PEI chain density, above which protein adsorption and transport behaviors changed drastically. The cIC was identified to be about 600mmol/L. Estimation of PEI grafting-layer thickness suggests that PEI chains formed an extended three-dimensional grafting-layer at IC>cIC, which provided high flexibility as well as accessibility of the chains for protein binding. Therefore, at IC>cIC, the adjacent PEI chains became close and flexible enough, leading to facilitated transport of adsorbed protein molecules by the interactions of neighboring chains mediated by the bound molecules. It is regarded as “chain delivery” effect. At the same time, improved accessibility of binding sites led the significant increase of binding capacity. The decrease of qm value at IC>740mmol/L is considered due to the decrease of effective porosity. The research has thus provided new insight into protein adsorption and transport in polymer-grafted ion-exchange media.

Cell adhesion on chiral surface: The role of protein adsorption

Chirality is one of the basic, unique, and most appealing features of biological molecules; however, many intriguing chiral phenomena in biological world remains insufficiently revealed yet. In this research, we fabricated chiral surfaces by assembling natural chiral amino acids-cysteine of opposite configurations (D- and L-) onto gold surfaces, respectively, and investigated the adhesion of the L929 fibroblast on them. No significant differences were observed in the density of adherent cells under serum-free culture condition; while in serum-containing condition, significantly more cells adhered on the L-Cys assembled surfaces. This phenomenon suggested that serum protein might play an important role in mediating the selective adhesion of cells on chiral surfaces. Hence, we adopted both radiolabeling and surface plasmon resonance (SPR) techniques to monitor protein adsorption onto the above surfaces. The results evidently showed more proteins adsorbed onto surfaces assembled with L-Cys. We propose that the difference in protein adsorption on chiral surfaces as demonstrated in this paper might not only shed light on the ensuing investigation of bio-related chirality phenomena, but also provide a novel strategy for the rational design and fabrication of novel biomaterials and bio-related devices based on chiral effects.

Shotgun proteomic analytical approach for studying proteins adsorbed onto liposome surface

The knowledge about the interaction between plasma proteins and nanocarriers employed for in vivo delivery is fundamental to understand their biodistribution. Protein adsorption onto nanoparticle surface (protein corona) is strongly affected by vector surface characteristics. In general, the primary interaction is thought to be electrostatic, thus surface charge of carrier is supposed to play a central role in protein adsorption. Because protein corona composition can be critical in modifying the interactive surface that is recognized by cells, characterizing its formation onto lipid particles may serve as a fundamental predictive model for the in vivo efficiency of a lipidic vector. In the present work, protein coronas adsorbed onto three differently charged cationic liposome formulations were compared by a shotgun proteomic approach based on nano-liquid chromatography-high-resolution mass spectrometry. About 130 proteins were identified in each corona, with only small differences between the different cationic liposome formulations. However, this study could be useful for the future controlled design of colloidal drug carriers and possibly in the controlled creation of biocompatible surfaces of other devices that come into contact with proteins into body fluids.

Chemical and Biological Properties of Polysaccharide-Coated Titania Nanoparticles: The Key Role of Proteins

In this study, we investigated the physicochemical and biological properties of naked and coated titania nanoparticles. The aim of this study was to verify the effect of the biopolymer coatings (hyaluronic acid and its biphosphonated derivative) and the role of protein adsorption from a cell culture medium on the citotoxicity of nanoparticles. Infrared spectroscopy (FT-IR) was used to investigate the interactions between the nanoparticles and the polysaccharides. The ζ potentials and the average hydrodynamic diameters of naked and coated nanoparticles dispersed in deionized water, medium with and without fetal bovine serum, were measured by means of dynamic light scattering (DLS). FT-IR and DLS measurements indicate that serum proteins are adsorbed on the NPs' surface. The biological tests show that naked and coated TiO(2) NPs do not induce an acute toxic effect on fibroblast cell cultures. This result shows that protein adsorption on NPs is an important factor in explaining the effect of NPs on cellular behavior.

Biomacromolecular affinity: Interactions between lysozyme and regioselectively sulfated chitosan

It is well known that the sulfate groups on different positions in polysaccharides play important roles in protein adsorption. However, the interactions between sulfated chitosans and lysozyme have not been clearly elucidated. In this study, the regioselectively sulfated chitosans, 6-O-sulfated chitosan (C6S), 2-N-6-O-sulfated chitosan (C26S) and 3,6-O-sulfated chitosan (C36S), were chosen to investigate the possible mechanisms determining the interaction between lysozyme and the sulfated chitosans. It has been found that the selectively sulfated products of chitosan (CS), C6S, C26S and C36S all exhibit lysozyme binding activity. However, the maximum binding ratios of lysozyme/polysaccharide are significantly different for C6S, C26S and C36S. In addition, though C6S possesses the lowest sulfur content among the three sulfated chitosans, it exhibits the highest binding activity with lysozyme. Furthermore, in the protein mixtures, C6S shows the highest selective binding activity with lysozyme among the three sulfated chitosans in the presence of γ-globulin and bovine serum albumin (BSA). The results indicate that 6-O-sulfate groups may be responsible for the high affinity and specific interaction of sulfated chitosan with lysozyme, while 2-O-sulfate and 3-O-sulfate groups are unfavorable to this interaction.

Protein adsorption and zeta potentials of a biphasic calcium phosphate ceramic under various conditions

An investigation on the relationship between protein adsorption and zeta potentials of a biphasic calcium phosphate (BCP) ceramic was carried out. Zeta potentials of the BCP ceramic particles were measured at various aqueous solutions. Bovine serum album (BSA) and its competitive adsorption with lysozyme (LSZ) on BCP were investigated using conventional protein adsorption and polyacrylamide gel electrophoresis (PAGE) methods. The results showed that zeta potential and the amount of adsorbed BSA were both influenced by pH, ionic strength, Ca2+ and PO4(3-) concentrations in the buffers. The variation tendencies of BSA adsorption were consistent with that of zeta potentials to some extent. The co-adsorption of BSA and LSZ on BCP was confirmed by the PAGE gel pattern. The semi-quantitative analysis for the detected protein bands proved that LSZ had higher affinity for BCP than BSA and would preferentially bind to the surface. Electrostatic interaction played an important role in protein adsorption on the surface of the BCP ceramic particles.