Role Of Compression Research Articles

Longer term follow-up of a randomized controlled trial on the role of compression after radiofrequency ablation of varicose veins

ObjectiveSeveral studies have shown that, in the short term, treatment outcomes following endothermal ablation of varicose veins without the prescription of post procedural compression are not inferior to outcomes when compression is routinely prescribed. This follow-up to our randomized controlled trial (RCT) published in 2020 explores whether the non-inferiority persists into the medium to long term. MethodsAll 94 patients from the RCT were recalled at 27 months after their initial radiofrequency ablation (RFA) procedure. The procedural details, randomization, and inclusion and exclusion criteria were described in the original RCT paper. Consent was obtained for further venous duplex ultrasound scan at 27 to 61 months after the initial procedure. The successful target vein closure at this juncture represented our primary outcome. Secondary outcomes include disease severity, measured using the Aberdeen Varicose Vein Severity Score (AVSS) and the Revised Venous Clinical Severity Score (RVCSS), post-procedural pain measured using Likert scale, and number of days taken for patients to return to work or normal activities. ResultsThirty-one of 48 patients (64.6%) in the compression group and 29 of 46 patients (63%) in the no-compression group were evaluated. The mean duration of follow-up was 43 and 42 months in the compression and no-compression group, respectively. The target vein occlusion rate evaluated at this longer-term follow up were 80.7% and 79.3% in the compression and no-compression groups, respectively. There was no significant difference between the two groups (P = .37). Secondary outcomes of quality of life and disease severity measured using AVSS and RVCSS showed no significant difference between the two groups (post-procedural AVSS mean score 5.2 in the compression group vs 8.3 in the no-compression group [95% confidence interval (CI), −7.3 to 1.1; P = .14]; post-procedural RVCSS mean score 1.5 in the compression group vs 1.8 in the no-compression group [95% CI, −1.1 to 0.7; P = .59]). Patient satisfaction was similar in both groups (mean score 6.4 in the compression group vs 5.9 in the no-compression group [95% CI, −0.22 to 1.17; P = .18]), and the number of days taken for patients to return to work were also comparable (mean of 11.9 days in the compression group vs 12.6 days in the no-compression group [95% CI, −7.7 to 6.2; P = .83]). ConclusionsThis study provided some evidence to support no additional benefit of compression use after RFA at a longer term follow-up of 3 years. However, larger, suitably powered studies would be beneficial to confirm this.

Finite Element Analysis of Delamination Initiation in Wind Turbine Blade Spar Caps: Role of Compression, Strain Energy, and Principal Stresses

In wind turbine blades, utilizing the finite element method (FEM) to identify potential failure modes before production provides considerable value and cost savings in contrast to conventional structural tests. This paper focuses on examining the factors leading to delamination in spar caps and exploring the initiation of this delamination using the finite element method. Compression, total strain energy density, and principal stresses are significant among the variables examined to determine the effects on model deformation and crack formation. Examining these variables may contribute to understanding the mechanisms involved in initiating and progressing delamination. This study examined the effects of compression, total strain energy density, and principal stresses on model deformation and crack formation. This study focuses on the effects of principal stresses on displacement, the effects of compression on delamination and crack formation, and the effects of total strain energy density on fracture tendency and failure modes due to delamination.

Mechanical compression regulates tumor spheroid invasion into a 3D collagen matrix

Uncontrolled growth of tumor cells in confined spaces leads to the accumulation of compressive stress within the tumor. Although the effects of tension within 3D extracellular matrices (ECMs) on tumor growth and invasion are well established, the role of compression in tumor mechanics and invasion is largely unexplored. In this study, we modified a Transwell assay such that it provides constant compressive loads to spheroids embedded within a collagen matrix. We used microscopic imaging to follow the single cell dynamics of the cells within the spheroids, as well as invasion into the 3D ECMs. Our experimental results showed that malignant breast tumor (MDA-MB-231) and non-tumorigenic epithelial (MCF10A) spheroids responded differently to a constant compression. Cells within the malignant spheroids became more motile within the spheroids and invaded more into the ECM under compression; whereas cells within non-tumorigenic MCF10A spheroids became less motile within the spheroids and did not display apparent detachment from the spheroids under compression. These findings suggest that compression may play differential roles in healthy and pathogenic epithelial tissues and highlight the importance of tumor mechanics and invasion.

Compression Characteristics of Liquid Ring Compressors With Fixed and Freely Rotating Casings

Abstract Liquid ring compressors (LRC) are used for a wide range of compression and vacuum applications, including corrosive or flammable gases for which other compression technologies may not be feasible. The presence of a surrounding liquid ring may offer the possibility of polytropic compression due to incremental heat loss to the liquid. This aspect may play a critical role in compression (and expansion) processes of heat engine cycles toward approaching the targeted Carnot efficiencies. To date, published research addressing the physical phenomena behind LRC is highly limited. Experimentally studying these machines will result in a demonstration of aggregate performance. In order to improve our understanding of LRC with and without freely rotating casings and to be able to analyze the complex inner workings, a numerical approach using computational fluid dynamics (CFD) tools, supported by available experimental data for validation purposes, has been established. Physical parameters such as water–air interface, temperature, pressure, entropy production, vorticity, and shear strain rate are presented for a baseline geometry taken from the open literature. Finally, temperature-entropy paths and isothermal and isentropic efficiencies are presented. The significant performance gain from the freely rotating casing is highlighted. Detailed results present insights into work addition processes of such machines.

Compressibility effects on the flow past a T106A low-pressure turbine cascade

The present numerical investigation delves into the intricate interplay between Mach number (Ms), flow characteristics, and vorticity dynamics within a T106A low-pressure turbine (LPT) blade passage. The two-dimensional (2D) compressible Navier–Stokes equations are solved using a high-accuracy, dispersion relation preserving methodology, which is validated against benchmark direct numerical simulations. Four Ms ranging from 0.15 to 0.30 are computed in order to display the intricate response of compressibility on the separation-induced transition process. The emergence and evolution of unsteady separation bubbles along the suction surface of the T106A blade are explored, revealing a growing trend with Ms. The time-averaged boundary layer parameters evaluated along the suction surface display a delayed separation with a smaller streamwise extent with increasing Ms. However, an overall increase in the blade profile loss and a decrease in turbulent mixing are observed with increasing Ms, suggesting a detrimental effect on LPT performance. Applying the compressible enstrophy transport equation (CETE) to the flow in a T106A blade passage reveals that while a linear relationship exists between Ms and certain CETE budget terms, other terms have a nuanced dependency, which paves the way for future investigations into the role of compressibility on enstrophy dynamics.

The role of compression in large scale data transfer and storage of typical biomedical signals at hospitals.

In modern hospitals, monitoring patients' vital signs and other biomedical signals is standard practice. With the advent of data-driven healthcare, Internet of medical things, wearable technologies, and machine learning, we expect this to accelerate and to be used in new and promising ways, including early warning systems and precision diagnostics. Hence, we see an ever-increasing need for retrieving, storing, and managing the large amount of biomedical signal data generated. The popularity of standards, such as HL7 FHIR for interoperability and data transfer, have also resulted in their use as a data storage model, which is inefficient. This article raises concern about the inefficiency of using FHIR for storage of biomedical signals and instead highlights the possibility of a sustainable storage based on data compression. Most reported efforts have focused on ECG signals; however, many other typical biomedical signals are understudied. In this article, we are considering arterial blood pressure, photoplethysmography, and respiration. We focus on simple lossless compression with low implementation complexity, low compression delay, and good compression ratios suitable for wide adoption. Our results show that it is easy to obtain a compression ratio of 2.7:1 for arterial blood pressure, 2.9:1 for photoplethysmography, and 4.1:1 for respiration.

Computational diagnostics for flame acceleration and transition to detonation in a hydrogen/air mixture

A new computational diagnostic method for pressure-induced compressibility is proposed by projecting its local contribution to the chemical explosive mode (CEM) in the chemical explosive mode analysis (CEMA) framework. The new method is validated for the study of detonation development during the deflagration-to-detonation transition (DDT) process. The flame characteristics are identified through the quantification of individual CEM contributions of chemical reaction, diffusion, and pressure-induced compressibility. Numerical simulations are performed to investigate the DDT processes in a stoichiometric hydrogen-air mixture. A Godunov algorithm, fifth-order in space, and third-order in time are used to solve the fully compressible Navier-Stokes equations on a dynamically adapting mesh. A single-step, calibrated chemical diffusive model (CDM) described by Arrhenius kinetics is used for energy release and conservation between the fuel and the product. The new diagnostic method is first applied to one-dimensional (1D) canonical flame configurations followed by two-dimensional (2D) simulations of DDT in an obstructed channel where different detonation initiation scenarios are examined using the new CEMA projection formulation. Detailed examinations of the idealized configuration of detonation initiation through shock focusing mechanism at a flame front are also studied using the new formulation. A comparison of the currently proposed CEMA projection and the original formulation by the authors suggests that including the pressure-induced compressibility is essential for the use of CEMA in DDT process. The results also show that the new formulation of CEMA projection can successively capture the detonation initiation through either a gradient mechanism or a direct initiation mechanism, and therefore can be used as an effective local analytical tool for the computational diagnostics of detonation initiation in a DDT process. It was found that detonation development is characterized by a strong contribution of chemistry role to the CEM which is pivotal to the initiation of detonation. The role of compressibility is found enhanced at the edge of the detonation front where diffusion was found to have minimal effects on detonation development. Novelty and Significance StatementA new computational diagnostic method for pressure-induced compressibility is proposed by projecting its local contribution to the chemical explosive mode (CEM) in the chemical explosive mode analysis (CEMA) framework. The proposed method is tested and validated for the study of detonation development during the deflagration to detonation transition (DDT) process. The new method is found to be an effective local analytical tool for the computational diagnostics of detonation initiation in a DDT process. The proposed method is versatile and can be used on various different platforms which makes this study more impactful.

Molecular dynamics simulation of tension and compression deformation behavior in CoCrCuFeNi high-entropy alloy: Effects of temperature and orientation

This study utilizes molecular dynamics (MD) simulations to investigate the uniaxial tensile and compressive deformation behavior of the face-centered cubic (FCC) CoCrCuFeNi high-entropy alloy (HEA) with varying orientations at different temperatures. The results indicate that the material experiences temperature-induced softening in all simulation cases. In addition, it has been observed that the mechanical properties of the CoCrCuFeNi HEA exhibit orientation dependence and tension-compression asymmetry. Analysis of the Schmid factor of the leading and trailing partial dislocations suggests that the yield asymmetry is contingent upon the leading Schmid factor asymmetry. Microstructure evolution analysis and quantitative statistics of deformation defects indicate that the plastic deformation mechanisms of uniaxial tensile deformation along the [001], [111], and [112] orientations and compressive deformation along the [110], [111], and [112] orientations can be characterized by the formation and annihilation of intrinsic stacking fault (ISF), extrinsic stacking fault (ESF), and a few twins resulting from the gliding of Shockley partial dislocations. Twins play a crucial role in compression along the [001] direction and tension along the [110] direction due to the proliferation of twin boundaries (TBs)-assisted dislocations. The interactions between stacking faults (SF) and abundant TBs cause an increase in dislocation density in the later stage of plastic deformation in the aforementioned models. A comparison with low-entropy materials and theoretical calculations reveals that alloying reduces the stacking fault energy (SFE) of the CoCrCuFeNi crystal and enhances its twinnability.

Necrobiosis lipoidica: a review of management and the role of compression

Necrobiosis lipoidica: a review of management and the role of compression

Quantifying the compressibility of complex networks

Many complex networks depend upon biological entities for their preservation. Such entities, from human cognition to evolution, must first encode and then replicate those networks under marked resource constraints. Networks that survive are those that are amenable to constrained encoding-or, in other words, are compressible. But how compressible is a network? And what features make one network more compressible than another? Here, we answer these questions by modeling networks as information sources before compressing them using rate-distortion theory. Each network yields a unique rate-distortion curve, which specifies the minimal amount of information that remains at a given scale of description. A natural definition then emerges for the compressibility of a network: the amount of information that can be removed via compression, averaged across all scales. Analyzing an array of real and model networks, we demonstrate that compressibility increases with two common network properties: transitivity (or clustering) and degree heterogeneity. These results indicate that hierarchical organization-which is characterized by modular structure and heterogeneous degrees-facilitates compression in complex networks. Generally, our framework sheds light on the interplay between a network's structure and its capacity to be compressed, enabling investigations into the role of compression in shaping real-world networks.

English

BACKGROUND Arcade of Frohse (AF) is a tendinous superior margin of superficial layer of supinator muscle which was first described by Frohse and Frankel in 1908. Since then it has been studied by many authors and held accountable as one of the essential components for compression of deep branch of radial nerve (DBRN) which leads to radial tunnel syndrome. Considering AF as an important element of compression, we made an attempt to classify it on the basis of its shape and to find out if any particular shape has a predominant role in compression of the nerve. We also observed the structure of superior and inferior margin of the supinator muscle. METHODS This study was conducted among 80 (70 males and 10 females) formalin fixed upper limbs present in the Department of Anatomy. The limbs were maintained in supine with slightly flexed position and dissection was performed to expose the supinator muscle. The proximal and distal borders of supinator muscles were examined meticulously with the help of magnified lens. The morphometric measurements were taken with the help of a digital caliper. RESULTS The FA is classified into four categories as loop, high arc, low arch and linear shaped. The most frequent shape observed was arch shaped (high and low arch) about 66%, followed by loop shaped (30%) and least was linear shaped (2.5%). On the basis of structure, the proximal and distal margin of supinator muscle was reported to be tendinous in majority of the cases. The distance of the AF from the fixed reproducible anatomical landmark like inter epicondylar line (IEL) was measured and the average distance found was 3.36 cm. CONCLUSIONS Knowledge of different shapes would aid surgeons and radiologists for better approach towards diagnosis and management of supinator syndrome. The morphometric finding can be useful for surgeons to locate the superior margin of supinator (AF) in surgical procedures for decompression of DBRN in supinator syndrome. KEY WORDS Arcade of Frohse, Inter Epicondylar Line, Supinator Muscle, Deep Branch of Radial Nerve and Radial Tunnel Syndrome

Delineation of the flow and mixing induced by Rayleigh–Taylor instability through tracers

Rayleigh–Taylor-instability (RTI) induced flow and mixing are of great importance in both nature and engineering scenarios. To capture the underpinning physics, tracers are introduced to make a supplement to discrete Boltzmann simulation of compressible RTI flows. By marking two types of tracers with different colors, the tracer distribution provides a clear boundary of two fluids during the evolution. Fine structures of RTI flow and thermodynamic non-equilibrium behavior around the interface in a miscible two-fluid system are delineated. Distribution of tracers in their velocity phase space makes a charming pattern showing quite dense information on the flow behavior, which opens a new perspective for analyzing and accessing significantly deep insights into the flow system. RTI mixing is further investigated via tracer-defined local mixedness. The appearance of Kelvin–Helmholtz instability is quantitatively captured by the abrupt increase in mixedness averaged along the direction of acceleration. The role of compressibility and viscosity on mixing are investigated separately, both of which show a two-stage effect. The underlying mechanism of the two-stage effect is interpreted as the development of large structures at the initial stage and the generation of small structures at the late stage. At the late stage, for a fixed time, a saturation phenomenon of viscosity is found that a further increase in viscosity cannot lead to an evident decline in mixedness. The mixing statues of heavy and light fluids are not synchronous and the mixing of an RTI system is heterogeneous. The results are helpful for understanding the mechanism of flow and mixing induced by RTI.

Editor's Choice - Role of Compression After Radiofrequency Ablation of Varicose Veins: A Randomised Controlled Trial

This randomized controlled trial of 100 consecutive patients with symptomatic venous insufficiency underwent RFA for mostly C3 to C4 disease. Randomization was done at the end of the procedures, 80% had RFA of saphenous veins, with patients opening a sealed envelope. Patients who wore compression stockings following radiofrequency ablation (RFA) did not have better outcomes than those who did not wear compression. Class 2 (23-32 mm Hg) compression was applied to the compression cohort who wore the hose for 2 weeks. Multiple satisfaction questionnaires were completed by all participants. At 12 weeks, there were no differences in occlusion rates (98% both groups), mean Aberdeen Varicose Vein Severity Scores and Revised Venous Clinical Severity Scores, satisfaction and pain scores, and deep venous thrombosis events. Although this relatively small clinical trial showed that there was no added benefit to compression following RFA for venous insufficiency, it is interesting that compression was only worn for 2 weeks. It is good to know that patients who cannot tolerate compression or in whom lighter compression is used will not have decreased occlusion rates as a result. But we also know that recanalization is not always accompanied by recurrent symptoms. My take home message is not to decline treatment to a patient who cannot tolerate long-term compression.

Karpal Tünel Sendrom Cerrahisinde Tenosinovektominin Hasta Sonuçlarina Etkisi

INTRODUCTION: Carpal tunnel syndrome (CTS) is estimated to be the most frequently seen mononeuropathy, needing surgical intervention. Its prevalence is known to range between 1, and 3 percent. The components contained in this tunnel are the median nerve, four deep digital flexor tendons, as well as four superficial flexors and the tendon of flexor pollicis longus. Between the tendons and bursae an anatomical structure is present called subsynovial connective tissue (SSCT). SSCT absorbs and transmits stress between tendons and the median nerve and it functions as a scaffold for vascular elements. To find out the role of compression or pathologic proliferation of SSCT in the pathogenesis of CTS, we aimed to conduct a study about the surgical technique of this pathology and compared the long- term results of patients operated with or without SSCT excision in our neurosurgery clinic. METHODS: Between 2003 and 2019 we operated 1279 patients at our neurosurgery clinic. Among them 250 patients who had SSCT excision (syn+) were chosen and they were compared with other 250 patients operated without SSCT excision (Syn-). RESULTS: All patients were evaluated preoperatively and 12 months postoperatively based on the results of Boston Carpal Tunnel Syndrome Questionnaire. When pre-, and post-operative results were compared, we didn’t observe a statistically significant intergroup difference. DISCUSSION AND CONCLUSION: Although our primary goal in patients in whom we performed excision of tenosynovium is to relieve the median nerve by increasing decompression, we observed that there was no difference between the two groups in this large-scale study. We think that only liberation of the transverse carpal ligament during surgery will be sufficient.

THE CENOZOIC CRUSTAL STRESS STATE OF MONGOLIA ACCORDING TO GEOLOGICAL AND STRUCTURAL DATA (REVIEW)

This article gives a chronological review of the main published research results concerning the Cenozoic crustal stress-strain state in Mongolia and adjacent territories. The studies commenced in the southern Baikal rift zone in the 1970s and were extended further southwards to cover mobile regions neighbouring the Siberian platform. Geological, structural and morphostructural data were collected and analysed to define the crustal stress types and spatial characteristics. The authors have consolidated their reconstructions of the crustal stress-strain state of Mongolia, which were based on tectonic fracturing data and displacements along fractures in fault zones active in the Cenozoic. We consolidated a database of reconstructed stress tensors, which now contains more than 750+ solutions. The Late Cenozoic stress field was mapped. The map shows domains differing in types of the paleostress state of the crust. The reconstructions were compared to our calculations of the present-day crustal stress state, which were based on earthquake focal mechanisms, and to calculations by other authors. At the Late Cenozoic and current stages, the maximum horizontal compression axis (S Hmax ) has varying orientations, from submeridional (Western Mongolia) to NE and ENE (Eastern Mongolia). The role of compression increases from the northern domains, where the reconstructions show shear and transtension, to the southern domains with prevailing transpression and compression. Regular changes occur in the stress state and rupture parageneses along the largest latitudinal faults, North Khangai and Dolinoozersky; such changes are related to left-lateral strike-slip faulting. We analysed the sequence of the occurrence of stress fields differing in types and spatial characteristics, and revealed the main regularities in the evolution of the crustal stress-strain state in time. In the Cenozoic history of crust deformation in Mongolia, we can distinguish several episodes that differ in the dominant impacts of various tectonic force sources or combinations of such impacts. At the beginning of the Cenozoic, tectonic structures developed mainly under the influence of the interaction of East Asia and the Pacific Plate, which was manifested in the southeastern domains of the study area. The long-term SE-trending asthenospheric flow caused crustal stretching, which initiated the formation of tectonic structures comprising the Baikal rift system. Starting from the Pliocene, crustal stretching took place in combination with NNE compression caused by the India–Eurasia convergence. As a result, shearing occurred along the large faults. At this background, the Khangai and Khentei uplifts (including crust extension zones at their crests) are large structures that developed due to the dynamic effect of local mantle anomalies.

Secondary Synostosis After Posterior Vault Distraction in Craniosynostosis: Possible Role of Compression From Distraction

Secondary Synostosis After Posterior Vault Distraction in Craniosynostosis: Possible Role of Compression From Distraction

Venous leg ulcer management in Australian primary care: Patient and clinician perspectives

BackgroundVenous leg ulcers are the most common chronic wound seen in Australian primary care. Healing outcomes are protracted due to suboptimal use of clinical practice guideline recommendations. A better understanding of the differences between patients and clinicians may optimise management in primary care and improve healing and health outcomes for patients and healthcare spend in society. ObjectiveWe explored venous leg ulcer management from patients’ and primary care clinicians’ perspective, including assessment, diagnosis, treatment, referral, and health education as outlined in the clinical practice guidelines. DesignWe conducted a qualitative secondary analysis of data obtained from the qualitative face-to-face and telephone interviews with the primary care clinicians and telephone interviews with patients with venous leg ulcers. SettingClinicians were recruited from urban and rural primary health practices across Victoria, Australia. Patients were recruited from two specialist care wound clinics in Victoria. ParticipantsWe analysed data from interviews with 66 participants, including 31 patients with venous leg ulcers, 15 general practitioners and 20 practice nurses. MethodsSecondary analysis of qualitative data was carried out using thematic analysis. Interview transcripts were coded and analysed for common themes. ResultsWe found patients and clinicians reported differing perspectives related to venous leg ulcer management. Patients reported the need for earlier referral to specialist wound care clinics from primary care, emphasizing the need for vascular assessment and compression therapy. Clinicians discussed clinical judgements about when to refer rather than follow guideline recommendations. Clinicians frequently discussed managing venous leg ulcers using only topical dressing treatments, without compression therapy. Patients reported inadequate pain management for wound pain. Meanwhile, clinicians reported that they generally did not discuss wound pain management as part of overall venous leg ulcer management. Clinicians reported patients lacked an understanding about the role of compression in management of and subsequent healing outcomes. Patients stated they wanted more information about how to care for venous leg ulcers and how best to prevent recurrence, and needed more information than was already provided by clinicians. Conversely, clinicians reported less information is given to ensure patients were not overwhelmed with health information. ConclusionThere are discrepancies between what patients want and what clinicians do. These data suggest that patients’ preferences are aligned with venous leg ulcer clinical practice guideline recommendations. Greater awareness of the guidelines by health professional may not only reduce discrepancies they may improve health and healing outcomes.Tweetable abstract: Patients and primary care clinicians have different perspectives about venous leg ulcer management.

Prospective study of clavicle fractures treated with precontoured locking compression plate

Background and Objectives: Clavicle fracture is one of the most common fracture in human body. From past many years its been treated conservatively with good results. This study is conducted to know role of compression locking plate plate in unstable comminuted clavicle fracture. Materials and Methods: We included 20patients in our study. All were subjected for surgical treatment with LCP and followed up for 1 year. Study is conducted in period between January 2018 and January 2019. Result: 17 patients out of 20 who were treated with Anatomic locking compression plate shows union at average duration of 3 months (12 weeks). Delayed union was seen in 3 patients, plate loosening in one patient and 3 patients had plate prominence. According to Constant and Murley score after fracture union, 15 patients show excellent functional outcome, 4 patients shown good outcome and fair outcome was seen in 1 patient. Conclusion: Our study concluded that precontoured locking compression plates in unstable displaced comminuted fractures in middle third of clavicle give fracture stability, allows early mobility and there by prevents shoulder stiffness. Keywords: Unstable, LCP (locking compression plate), Delayed unionUnstable.

Gaussian Hermite polynomial based lossless medical image compression

The role of compression is inevitable in the storage and transmission of medical images. The polynomial based image compression is proposed in this work for the compression of abdomen CT medical images. The input images are preprocessed by min–max normalization; the pixels are scanned and subjected to polynomial approximation. The polynomial approximated coefficients are subjected to llyods quantization and encoded by arithmetic coder. The medical image compression using Gaussian Hermite polynomial gives superior results when compared with the legendre polynomial based image compression and JPEG lossless compression techniques in terms of Peak to signal noise ratio (PSNR), Mean square Error (MSE) and other picture quality metrics. The algorithms are tested on real-time DICOM abdomen CT image and can be used for data transfer in teleradiology application.

Combined Viscoplasticity-Embedded Discontinuity Model for 3D Description of Rock Failure Under Dynamic Loading

This paper presents a combined viscoplasticity-embedded discontinuity model for 3D analyses of rock failure processes under dynamic loading. Capabilities of a rate-dependent embedded discontinuity model, implemented with the linear tetrahedral element, for mode I (tension) loading induced fractures is extended to compressive (shear) failure description by viscoplastic softening model with the Drucker–Prager yield criterion. The return mapping update formulas are derived for the corner plasticity case exploiting the consistency conditions for both models simultaneously. The model performance is demonstrated in 3D numerical simulations of uniaxial tension and compression test on a heterogeneous rock at various loading rates. These simulations corroborate the conception that the rate sensitivity of rock is a genuine material property in tension while structural (inertia) effects play the major role in compression at high loading rates (up to 1000 s−1). Finally, the model is validated with predicting the experiments of dynamic Brazilian disc test on granite.