Role In Bioflocculation Research Articles

Involvement of Acinetobacter sp. in the floc-formation in activated sludge process

The coaggregation behavior of Acinetobacter johnsonii S35 isolate with sewage bacteria was assessed by a spectrophotometric assay using different samples from a municipal wastewater treatment plant and a community plant. A. johnsonii S35 coaggregated well with other free bacteria and microflocs at the mixing ratios of 0.2:1-0.6:1 of A. johnsonii S35 and sewage samples. In addition, the size of coaggregates became larger (100 μm or more) under the same conditions. A. johnsonii S35 cells were highly adsorbed (adsorption=93-99%) onto sludge samples. Microbial adhesion to hydrocarbon (MATH) test and adsorption to octyl-Sepharose CL-4B showed that A. johnsonii S35 cells and sludge samples had a hydrophobic character. The population of Acinetobacter spp. in sewage treatment plants was 2-7% and its role in bioflocculation was discussed. The present study revealed that A. johnsonii S35 isolate can play as a bridging organism and contribute in floc-formation in activated sludge process.

Effects of temperature and dissolved oxygen on sludge properties and their role in bioflocculation and settling

Effects of temperature (mesophilic (35 °C) vs. thermophilic (55 °C)) and dissolved oxygen (DO) concentration (under thermophilic conditions) on sludge properties and their role in bioflocculation and settling were studied using well-controlled sequencing batch reactors fed with a synthetic wastewater comprised of glucose and inorganic nutrients. Under a similar DO level, thermophilic sludge had a poorer bioflocculating ability and settleability than that of mesophilic sludge. Under a thermophilic condition, an increase in DO level led to a poorer settleability and a slightly improved bioflocculating ability. A poorer settleability was related to a higher level of filaments. Analysis of bound extracellular polymeric substances (EPS) indicates that thermophilic sludge had a higher level of total bound EPS content than that of mesophilic sludge under a similar DO level, and an increase in DO resulted in an increase in total bound EPS content in thermophilic sludge. Surface analysis of sludge by X-ray photoelectron spectroscopy (XPS) suggests that significant differences in the surface concentrations of elements N, C, O were observed between thermophilic and mesophilic sludge, implying significant differences in bound EPS composition. The results of gel permeation chromatography indicate that the weight-averaged molecular weight (Mw) of bound EPS covered a range of 1159 Da to 13220 Da. The distribution of EPS “species” at floc surfaces was shown by transmission electron microscopy (TEM) to be uneven; different kinds of nanoscale materials were distributed in a patchy manner at the floc–water interface. The results suggest that it is the role of specific EPS molecules rather than the quantity of bound EPS that determine the difference in bioflocculation behavior between thermophilic and mesophilic sludge. The strategy of increasing the DO level could not solve the biomass separation problems associated with thermophilic sludge.

Effects of floc aluminum on activated sludge characteristics and removal of 17-α-ethinylestradiol in wastewater systems

The effects of floc aluminum (Al) on activated sludge performance and 17-α-ethinylestradiol (EE2) removal were studied using bench-scale activated sludge systems. The results showed that higher Al-fed activated sludge led to better settling, dewatering, and effluent quality with better EE2 removal. EE2 concentrations in the effluent revealed correlations with effluent suspended solids and large particulate/colloidal effluent biopolymer (protein + polysaccharide). Furthermore, a significant correlation existed between effluent proteins and EE2 for all size fractions, indicating that hydrophobic proteinaceous colloids provide binding sites for EE2 and washout together into the effluent. These results suggest that aluminum plays a crucial role in bioflocculation of activated sludge and the efficacy of flocculation influences the removal of endocrine disrupting compounds (EDCs) from wastewater treatment systems.

The Effect of Wastewater Cations on Activated Sludge Characteristics: Effects of Aluminum and Iron in Floc

Wastewater samples collected from seven wastewater treatment plants (WWTPs) were characterized to assess the impacts of wastewater cations on the activated sludge process. The cations included in this study were sodium (Na+), potassium, ammonium, calcium, magnesium, aluminum (Al), and iron (Fe). Among the selected cations, Al and Fe were of most interest to this study because their role in bioflocculation has not been extensively studied and remains largely unknown. The data showed that WWTPs contained highly varying concentrations of Na+, Al, and Fe in the wastewater and that these cations were responsible for differences between WWTPs as to sludge dewatering rates and effluent quality. In general, a high influent Na+ concentration caused poor sludge dewatering and effluent characteristics. However, when sufficient Al and Fe were present in floc, the deleterious effects of Na+ were offset. The data associated with Al further revealed that waste activated sludge with low Al contained high concentrations of soluble and colloidal biopolymer (protein + polysaccharide), resulting in a high effluent chemical oxygen demand, high conditioning chemical requirements, and poor sludge dewatering properties. These results suggest that Al will improve activated sludge effluent quality by scavenging organic compounds from solution and binding them to floc.

Surface properties of sludge and their role in bioflocculation and settleability

The influence of sludge retention time (SRT) on the extracellular polymeric substances (EPS) and physicochemical properties (hydrophobicity and surface charge) of sludge was studied using laboratory-scale sequencing batch reactors (SBRs) fed a synthetic wastewater containing glucose and inorganic salts. Sludge surfaces were more hydrophobic (larger contact angle) and less negatively charged at higher SRTs (16 and 20 d) than at lower SRTs (4 and 9 d). The ratio of proteins to carbohydrates within the EPS of the sludges increased as the SRT increased from 4 to 12 d corresponding to the changes in the physicochemical properties of the sludge. The protein : carbohydrate ratio remained constant at SRTs of 16 and 20 d. A transition in sludge properties appeared to occur between the upper range of low- (9 d) and lower range of high- SRTs. The total EPS content, however, was independent of the SRT. A higher sludge volume index (SVI), an indication of poorer settleability or compression, was associated with a larger amount of total EPS but no significant correlation between SVI and the surface properties of sludge was observed. A more hydrophobic and less negatively charged surface corresponded to lower levels of ESS. These results indicate that it is the surface properties, hydrophobicity, surface charge and composition of EPS , of sludge, rather than the quantity of EPS, that govern bioflocculation. In contrast, the EPS content is more important in controlling the settleability of sludge.

Characterization of Exocellular Protein and Its Role in Bioflocculation

The relationship between exocellular biopolymer concentration and cation concentration was examined using laboratory scale activated sludge reactors with bactopeptone as a feed. An increase in the divalent cation concentration in the feed to the reactors was associated with an increase in the bound exocellular protein concentration, and high sodium concentrations resulted in a decrease in the bound protein concentration. The changes in bound biopolymer were explained according to the cation bridging model. Incubation of a laboratory activated sludge with a proteolytic enzyme resulted in deflocculation of the suspension as measured by an increase in the number of particles in the 5–40 μm range, which suggested that the exocellular protein was strongly involved in the aggregation of bacteria into flocs. SDS PAGE results revealed the presence of a single protein in the exocellular biopolymer extract from municipal, industrial, and laboratory activated sludge samples. The molecular weight of the protein was approximately 15 daltons. Amino acid analysis and amino acid sequencing results suggested the protein was a lectinlike protein, and binding site inhibition studies demonstrated that the protein had lectinlike activity.

Studies on bio-flocculation with the flocculants produced by microorganisms. II. Purification and chemical analysis of microbial cell flocculant produced by Aspergillus sojae AJ7002.

A bio-flocculant was isolated from the culture broth of Asp. sojae AJ 7002. It was partially purified by acetone or ethanol precipitation, by ion-exchange and gel chromatography, and by dialysis. The isolated polymer possessed chemical characteristics of a poly-hexosamine and a protein. Glucosamine and galactosamine were not acetylated. The flocculant contained 2-ketogluconic acid, but sulfur or phosphorus was not detected. This flocculant was thermo-stable and its activity varied with pH. It was suggested that the hexosamine moiety in the polymer played a major role in bio-flocculation, assisted by protein portion in enlargement of the molecular weight of the flocculant, and by 2-ketogluconic acid in endowing it with amphoteric character.